Rotational and Translational Diffusion of Proteins as a Function of Concentration

Molecular mechanisms for stabilizing biologics in the solid state

Protein drugs exhibit challenges of biophysical and biochemical instability due to their structural complexity and rich dynamics. Solid-state biologics aim to enhance stability by increasing molecular rigidity within the formulation matrix, representing a primary category of drug products alongside sterile liquid formulations. Understanding the molecular mechanisms behind the stabilization and destabilization of protein drugs, influenced by formulation composition and drying processes, provides scientific rationale for drug product design. This review aims to elaborate on the two primary models of water-to-sugar substitution and matrix vitrification, respectively, via thermodynamic and kinetic stabilization. It offers an up-to-date review of experimental investigations into these hypotheses, specifically elucidating protein structure and protein-excipient interactions at the molecular level, molecular dynamics across a broad range of motion regimes, and microscopic attributes such as protein-sugar and protein-salt miscibility and microenvironmental acidity, in relevant liquid, frozen, and solid states, using advanced biophysical techniques for solid-state analysis. Moreover, we discuss how these mechanistic understandings facilitate the investigation and prediction of critical stability behaviors and enables the design of solid biological drug products.

Diffusion and Viscosity in Mixed Protein Solutions

The viscosity and diffusion properties of crowded protein systems were investigated with molecular dynamics simulations of SH3 mixtures with different crowders, and results were compared with experimental data. The simulations accurately reproduced experimental trends across a wide range of protein concentrations, including highly crowded environments up to 300 g/L. Notably, viscosity increased with crowding but varied little between different crowder types, while diffusion rates were significantly reduced depending on protein-protein interaction strength. Analysis using the Stokes-Einstein relation indicated that the reduction in diffusion exceeded what was expected from viscosity changes alone, with the additional slow-down attributable to transient cluster formation driven by weakly attractive interactions. Contact kinetics analysis further revealed that longer-lived interactions contributed more significantly to reduced diffusion rates than short-lived interactions. This study also highlights the accuracy of current computational methodologies for capturing the dynamics of proteins in highly concentrated solutions and provides insights into the molecular mechanisms affecting protein mobility in crowded environments.

Diffusion and Viscosity in Mixed Protein Solutions

The viscosity and diffusion properties of crowded protein systems were investigated with molecular dynamics simulations of SH3 mixtures with different crowders, and results were compared with experimental data. The simulations accurately reproduced experimental trends across a wide range of protein concentrations, including highly crowded environments up to 300 g/L. Notably, viscosity increased with crowding but varied little between different crowder types, while diffusion rates were significantly reduced depending on protein-protein interaction strength. Analysis using the Stokes-Einstein relation indicated that the reduction in diffusion exceeded what was expected from viscosity changes alone, with the additional slow-down attributable to transient cluster formation driven by weakly attractive interactions. Contact kinetics analysis further revealed that longer-lived interactions contributed more significantly to reduced diffusion rates than short-lived interactions. This study also highlights the accuracy of current computational methodologies for capturing the dynamics of proteins in highly concentrated solutions and provides insights into the molecular mechanisms affecting protein mobility in crowded environments.

Diffusion of proteins in crowded solutions studied by docking-based modeling

The diffusion of proteins is significantly affected by macromolecular crowding. Molecular simulations accounting for protein interactions at atomic resolution are useful for characterizing the diffusion patterns in crowded environments. We present a comprehensive analysis of protein diffusion under different crowding conditions based on our recent docking-based approach simulating an intracellular crowded environment by sampling the intermolecular energy landscape using the Markov Chain Monte Carlo protocol. The procedure was extensively benchmarked, and the results are in very good agreement with the available experimental and theoretical data. The translational and rotational diffusion rates were determined for different types of proteins under crowding conditions in a broad range of concentrations. A protein system representing most abundant protein types in the E. coli cytoplasm was simulated, as well as large systems of other proteins of varying sizes in heterogeneous and self-crowding solutions. Dynamics of individual proteins was analyzed as a function of concentration and different diffusion rates in homogeneous and heterogeneous crowding. Smaller proteins diffused faster in heterogeneous crowding of larger molecules, compared to their diffusion in the self-crowded solution. Larger proteins displayed the opposite behavior, diffusing faster in the self-crowded solution. The results show the predictive power of our structure-based simulation approach for long timescales of cell-size systems at atomic resolution.

Computational Approaches to Predict Protein-Protein Interactions in Crowded Cellular Environments

Investigating protein-protein interactions is crucial for understanding cellular biological processes because proteins often function within molecular complexes rather than in isolation. While experimental and computational methods have provided valuable insights into these interactions, they often overlook a critical factor: the crowded cellular environment. This environment significantly impacts protein behavior, including structural stability, diffusion, and ultimately the nature of binding. In this review, we discuss theoretical and computational approaches that allow the modeling of biological systems to guide and complement experiments and can thus significantly advance the investigation, and possibly the predictions, of protein-protein interactions in the crowded environment of cell cytoplasm. We explore topics such as statistical mechanics for lattice simulations, hydrodynamic interactions, diffusion processes in high-viscosity environments, and several methods based on molecular dynamics simulations. By synergistically leveraging methods from biophysics and computational biology, we review the state of the art of computational methods to study the impact of molecular crowding on protein-protein interactions and discuss its potential revolutionizing effects on the characterization of the human interactome.

High-Throughput Interactome Determination via Sulfur Anomalous Scattering

We propose a novel approach for detecting the binding between proteins making use of the anomalous diffraction of natively present heavy elements, e.g., sulfurs, inside molecular three-dimensional structures. In particular, we analytically and numerically show that the diffraction patterns produced by the anomalous scattering of the sulfur atoms in a given direction depend additively on the relative distances between all couples of sulfur atoms. Thus, the differences in the patterns produced by bound proteins with respect to their nonbonded states can be exploited to rapidly assess protein complex formation. On the basis of our results, we suggest a possible experimental procedure for detecting protein-protein binding. Overall, the completely label-free and rapid method we propose may be readily extended to probe interactions on a large scale, thus paving the way for the development of a novel field of research based on a synchrotron light source.

Martini on the Rocks: Can a Coarse-Grained Force Field Model Crystals?

Computational chemistry is an important tool in numerous scientific disciplines, including drug discovery and structural biology. Coarse-grained models offer simple representations of molecular systems that enable simulations of large-scale systems. Because there has been an increase in the adoption of such models for simulations of biomolecular systems, critical evaluation is warranted. Here, the stability of the amyloid peptide and organic crystals is evaluated using the Martini 3 coarse-grained force field. The crystals change shape drastically during the simulations. Radial distribution functions show that the distance between backbone beads in β-sheets increases by ∼1 Å, breaking the crystals. The melting points of organic compounds are much too low in the Martini force field. This suggests that Martini 3 lacks the specific interactions needed to accurately simulate peptides or organic crystals without imposing artificial restraints. The problems may be exacerbated by the use of the 12-6 potential, suggesting that a softer potential could improve this model for crystal simulations.

Computational microbiology of bacteria: Advancements in molecular dynamics simulations

Microbiology is traditionally considered within the context of wet laboratory methodologies. Computational techniques have a great potential to contribute to microbiology. Here, we describe our loose definition of "computational microbiology" and provide a short survey focused on molecular dynamics simulations of bacterial systems that fall within this definition. It is our contention that increased compositional complexity and realistic levels of molecular crowding within simulated systems are key for bridging the divide between experimental and computational microbiology.

Identical Diffusion Distributions and Co-Cluster Formation Dictate Azeotrope Formation: Microscopic Evidences and Experimental Signatures

What selects azeotropic pairs and governs the azeotropic conditions (composition and temperature) is an open and intriguing question. A combined simulation and experimental work presented here investigates this by considering ethanol-water mixtures. We find identical distributions of center-of-mass diffusion coefficients for ethanol and water molecules under the azeotropic condition (95.5 wt % ethanol +4.5 wt % water, Tazeo = 351.1K). Moreover, the particle displacements show strong interspecies correlations at Tazeo. Interestingly, simulated reorientation time distributions become identical at Tazeo but at a composition different from that at which the translational diffusion distributions overlapped. Cluster analyses indicate that solutions at Tazeo with xwater ≤ 15 wt % are more microheterogeneous than those with higher water content, although no anomaly in the composition-dependent solution structural properties was detected. Ethanol-water and ethanol-ethanol interaction energies show pronounced nonideal composition dependence, but the size of the relative fluctuations in them remained small (∼0.5kBT). Rare water-water H-bonding, predominant water-ethanol H-bonding, and a sizable population of "free" water molecules characterize the azeotropic solutions. The red edge excitation spectroscopic (REES) measurements with a dissolved anionic fluorescent dye, coumarin343 (C343), support the predicted solution microheterogeneity by showing a nonmonotonic composition dependence of the excitation energy-induced changes in the fluorescence emission spectral frequencies and bandwidths, the largest changes being under the azeotropic condition. Subsequent dynamic anisotropy measurements reveal a nonmonotonic composition dependence of C343 rotation times with a peak under the azeotropic condition. In summary, equalization of the component translational diffusion coefficients and solution microheterogeneity with regular composition dependence of the solution structure appear to characterize the ethanol-water azeotrope.

Protein translational diffusion as a way to detect intermolecular interactions

In this work, we analyze the information on the protein intermolecular interactions obtained from macromolecular diffusion. We have shown that the most hopeful results are given by our approach based on analysis of protein translational self-diffusion and collective diffusion obtained by dynamic light scattering and pulsed-field gradient NMR (PFG NMR) spectroscopy with the help of Vink's approach to analyze diffusion motion of particles by frictional formalism of non-equilibrium thermodynamics and the usage of the Derjaguin-Landau-Verwey-Overbeek (DLVO) theory of colloid particles interactions in electrolyte solutions. Early we have shown that integration of Vink's theory with DLVO provides a reliable basis for uniform interpreting of PFG NMR and DLS experiments on concentration dependence of diffusion coefficients. Basic details of theoretical and mathematical procedures and a broad analysis of experimental attestation of proposed conception on proteins of various structural form, size, and shape are presented. In the present review, the main capabilities of our approach obtain the details of intermolecular interactions of proteins with different shapes, internal structures, and mass. The universality of Vink's approach is experimentally shown, which gives the appropriate description of experimental results for proteins of complicated structure and shape.

Capturing the Polarization Response of Solvated Proteins under Constant Electric Fields in Molecular Dynamics Simulations

We capture and compare the polarization response of a solvated globular protein ubiquitin to static electric (E-fields) using atomistic molecular dynamics simulations. We collectively follow E-field induced changes, electrical and structural, occurring across multiple trajectories using the magnitude of the protein dipole vector (P_p ). E-fields antiparallel to P_p induce faster structural changes and more facile protein unfolding relative to parallel fields of the same strength. While weak E-fields (0.1-0.5 V/nm) do not unfold ubiquitin and produce a reversible polarization, strong E-fields (1-2 V/nm) unfold the protein through a pathway wherein the helix:β-strand interactions rupture before those for the β1-β5 clamp. Independent of E-field direction, high E-field induced structural changes are also reversible if the field is switched off before P_p exceeds 2 times its equilibrium value. We critically examine the dependence of water properties, protein rotational diffusion and E-field induced protein unfolding pathways on the thermostat/barostat parameters used in our simulations.

Probing Methyl Group Dynamics in Proteins by NMR Cross-Correlated Dipolar Relaxation and Molecular Dynamics Simulations

Nuclear magnetic resonance (NMR) spin relaxation is the most informative approach to experimentally probe the internal dynamics of proteins on the picosecond to nanosecond time scale. At the same time, molecular dynamics (MD) simulations of biological macromolecules are steadily improving through better physical models, enhanced sampling methods, and increased computational power, and they provide exquisite information about flexibility and its role in protein stability and molecular interactions. Many examples have shown that MD is now adept in probing protein backbone motion, but improvements are still required toward a quantitative description of the dynamics of side chains, for example, probed by the dynamics of methyl groups. Thus far, the comparison of computation with experiment for side chain dynamics has primarily focused on the relaxation of ¹³C and ²H nuclei induced by autocorrelated variation of spin interactions. However, the cross-correlation of ¹³C-¹H dipolar interactions in methyl groups offers an attractive alternative. Here, we establish a computational framework to extract cross-correlation relaxation parameters of methyl groups in proteins from all-atom MD simulations. To demonstrate the utility of the approach, cross-correlation relaxation rates of ubiquitin are computed from MD simulations performed with the AMBER99SB*-ILDN and CHARMM36 force fields. Simulation results were found to agree well with those obtained by experiment. Moreover, the data obtained with the two force fields are highly consistent.

Effect of Protein–Protein Interactions on Translational Diffusion of Spheroidal Proteins

One of the commonly accepted approaches to estimate protein–protein interactions (PPI) in aqueous solutions is the analysis of their translational diffusion. The present review article observes a phenomenological approach to analyze PPI effects via concentration dependencies of self- and collective translational diffusion coefficient for several spheroidal proteins derived from the pulsed field gradient NMR (PFG NMR) and dynamic light scattering (DLS), respectively. These proteins are rigid globular α-chymotrypsin (ChTr) and human serum albumin (HSA), and partly disordered α-casein (α-CN) and β-lactoglobulin (β-Lg). The PPI analysis enabled us to reveal the dominance of intermolecular repulsion at low ionic strength of solution (0.003–0.01 M) for all studied proteins. The increase in the ionic strength to 0.1–1.0 M leads to the screening of protein charges, resulting in the decrease of the protein electrostatic potential. The increase of the van der Waals potential for ChTr and α-CN characterizes their propensity towards unstable weak attractive interactions. The decrease of van der Waals interactions for β-Lg is probably associated with the formation of stable oligomers by this protein. The PPI, estimated with the help of interaction potential and idealized spherical molecular geometry, are in good agreement with experimental data.

Atomistic Simulation of Lysozyme in Solutions Crowded by Tetraethylene Glycol: Force Field Dependence

The behavior of biomolecules in crowded environments remains largely unknown due to the accuracy of simulation models and the limited experimental data for comparison. Here we chose a small crowder of tetraethylene glycol (PEG-4) to investigate the self-crowding of PEG-4 solutions and molecular crowding effects on the structure and diffusion of lysozyme at varied concentrations from dilute water to pure PEG-4 liquid. Two Amber-like force fields of Amber14SB and a99SB-disp were examined with TIP3P (fast diffusivity and low viscosity) and a99SB-disp (slow diffusivity and high viscosity) water models, respectively. Compared to the Amber14SB protein simulations, the a99SB-disp model yields more coordinated water and less PEG-4 molecules, less intramolecular hydrogen bonds (HBs), more protein-water HBs, and less protein-PEG HBs as well as stronger interactions and more hydrophilic and less hydrophobic contacts with solvent molecules. The a99SB-disp model offers comparable protein-solvent interactions in concentrated PEG-4 solutions to that in pure water. The PEG-4 crowding leads to a slow-down in the diffusivity of water, PEG-4, and protein, and the decline in the diffusion from atomistic simulations is close to or faster than the hard sphere model that neglects attractive interactions. Despite these differences, the overall structure of lysozyme appears to be maintained well at different PEG-4 concentrations for both force fields, except a slightly large deviation at 370 K at low concentrations with the a99SB-disp model. This is mainly attributed to the strong intramolecular interactions of the protein in the Amber14SB force field and to the large viscosity of the a99SB-disp water model. The results indicate that the protein force fields and the viscosity of crowder solutions affect the simulation of biomolecules under crowding conditions.

Protein assembly and crowding simulations

Proteins encounter frequent molecular interactions in biological environments. Computer simulations have become an increasingly important tool in providing mechanistic insights into how such interactions in vivo relate to their biological function. The review here focuses on simulations describing protein assembly and molecular crowding effects as two important aspects that are distinguished mainly by how specific and long-lived protein contacts are. On the topic of crowding, recent simulations have provided new insights into how crowding affects protein folding and stability, modulates enzyme activity, and affects diffusive properties. Recent studies of assembly processes focus on assembly pathways, especially for virus capsids, amyloid aggregation pathways, and the role of multivalent interactions leading to phase separation. Also, discussed are technical challenges in achieving increasingly realistic simulations of interactions in cellular environments.

Kirkwood-Buff-Derived Force Field for Peptides and Proteins: Applications of KBFF20

Here, we perform structural, thermodynamic, and kinetics tests of the Kirkwood-Buff-derived force field, KBFF20, for peptides and proteins developed in the previous article. The physical/structural tests measure the ability of KBFF20 to capture the experimental J-couplings for small peptides, to keep globular monomeric and oligomeric proteins folded, and to produce the experimentally relevant expanded conformational ensembles of intrinsically disordered proteins. The thermodynamic-based tests probe KBFF20's ability to quantify the preferential interactions of sodium chloride around native β-lactoglobulin and urea around native lysozyme, to reproduce the melting curves for small helix- and sheet-based peptides, and to fold the small proteins Trp-cage and Villin. The kinetics-based tests quantify how well KBFF20 can match the experimental contact formation rates of small, repeat-sequence peptides of variable lengths and the rotational diffusion coefficients of globular proteins. The results suggest that KBFF20 is naturally able to reproduce properties of both folded and disordered proteins, which we attribute to the use of the Kirkwood-Buff theory as the foundation of the force field's development. However, we show that KBFF20 tends to lose some well-defined secondary structural elements and increases the percentage of coil regions, indicating that the perfect balance of all interactions remains elusive. Nevertheless, we argue that KBFF20 is an improvement over recently modified force fields that require ad hoc interventions to prevent the collapse of intrinsically disordered proteins.

Conformational Preferences of an Intrinsically Disordered Protein Domain: A Case Study for Modern Force Fields

Molecular simulations of intrinsically disordered proteins (IDPs) are challenging because they require sampling a very large number of relevant conformations, corresponding to a multitude of shallow minima in a flat free energy landscape. However, in the presence of a binding partner, the free energy landscape of an IDP can be dominated by few deep minima. This characteristic imposes high demands on the accuracy of the force field used to describe the molecular interactions. Here, as a model system for an IDP that is unstructured in solution but folds upon binding to a structured interaction partner, the transactivation domain of c-Myb was studied both in the unbound (free) form and when bound to the KIX domain. Six modern biomolecular force fields were systematically tested and compared in terms of their ability to describe the structural ensemble of the IDP. The protein force field/water model combinations included in this study are AMBER ff99SB-disp with its corresponding water model that was derived from TIP4P-D, CHARMM36m with TIP3P, ff15ipq with SPC/E_b, ff99SB*-ILDNP with TIP3P and TIP4P-D, and FB15 with TIP3P-FB water. Comparing the results from REST2-enhanced sampling simulations with experimental CD spectra and secondary chemical shifts reveals that the ff99SB-disp force field can realistically capture the broad and mildly helical structural ensemble of free c-Myb. The structural ensembles yielded by CHARMM36m, ff99SB*-ILDNP together with TIP4P-D water, and FB15 are also mildly helical; however, each of these force fields can be assigned a specific subset of c-Myb residues for which the simulations could not reproduce the experimental secondary chemical shifts. In addition, microsecond-timescale MD simulations of the KIX/c-Myb complex show that most force fields used preserve a stable helix fold of c-Myb in the complex. Still, all force fields predict a KIX/c-Myb complex interface that differs slightly from the structures provided by NMR because several NOE-derived distances between KIX and c-Myb were exceeded in the simulations. Taken together, the ff99SB-disp force field in the first place but also CHARMM36m, ff99SB*-ILDNP together with TIP4P-D water, and FB15 can be suitable choices for future simulation studies of the coupled folding and binding mechanism of the KIX/c-Myb complex and potentially also other IDPs.

Mechanochemical enzymes and protein machines as hydrodynamic force dipoles: the active dimer model

Mechanochemically active enzymes change their shapes within every turnover cycle. Therefore, they induce circulating flows in the solvent around them and behave as oscillating hydrodynamic force dipoles. Because of non-equilibrium fluctuating flows collectively generated by the enzymes, mixing in the solution and diffusion of passive particles within it are expected to get enhanced. Here, we investigate the intensity and statistical properties of such force dipoles in the minimal active dimer model of a mechanochemical enzyme. In the framework of this model, novel estimates for hydrodynamic collective effects in solution and in lipid bilayers under rapid rotational diffusion are derived, and available experimental and computational data is examined.

Constant-pH Brownian Dynamics Simulations of a Protein near a Charged Surface

We have developed a rigid-body Brownian dynamics algorithm that allows for simulations of a globular protein suspended in an ionic solution confined by a charged planar boundary, with an explicit treatment of pH-dependent protein protonation equilibria and their couplings to the electrostatic potential of the plane. Electrostatic interactions are described within a framework of the continuum Poisson-Boltzmann model, whereas protein-plane hydrodynamic interactions are evaluated based on analytical expressions for the position- and orientation-dependent near-wall friction tensor of a spheroid. The algorithm was applied to simulate near-surface diffusion of lysozyme in solutions having pH in the range 4-10 and ionic strengths of 10 and 150 mM. As a reference, we performed Brownian dynamics simulations in which the protein is assigned a fixed, most probable protonation state, appropriate for given solution conditions and unaffected by the presence of the charged plane, and Brownian dynamics simulations in which the protein probes possible protonation states with the pH-dependent probability, but these variations are not coupled to the electric field generated by the boundary. We show that electrostatic interactions with the negatively charged plane substantially modify probabilities of different protonation states of lysozyme and shift protonation equilibria of both acidic and basic amino acid side chains toward higher pH values. Consequently, equilibrium energy distributions, equilibrium position-orientation distributions, and functions that characterize rotational dynamics, which for a protein with multiple ionization sites, such as lysozyme, in the presence of a charged obstacle are pH-dependent, are significantly affected by the approach taken to incorporate the solution pH into simulations.