Robust Contact Angle Determination for Needle-in-Drop Type Measurements

Low-cost, open-source contact angle analyzer using a mobile phone, commercial tripods and 3D printed parts

Measurement of contact angle is important in many areas of science and engineering research. Contact angle analyzers are however not easily accessible due to their expensive cost, which hinders their use in research and also in education. In this study we propose a low-cost contact angle analyzer that can be assembled with 3D printed parts. Mobile phone is used for imaging, and the image is analyzed using an open-source ImageJ plugin. Commercial camera tripods are used as platform that provides movement in many degrees of freedom, which are important in leveling of the substrate and proper imaging of droplets. We utilize the tripods to build imaging modules, sample plate module and volume metering module, each of which perform distinct tasks. Especially, we characterize the usefulness of the volume metering module, which helps users dispense same volume of liquid to reduce human error during measurement. The cost of an analyzer is $255.10, which is an order of magnitude lower compared to commercial products. With the advancement in open source software and upgrades in the hardware modules, we expect that the proposed contact angle analyzer to have a positive impact in resource limited research labs and educational environments.

Capillary Bridges on Hydrophobic Surfaces: Analytical Contact Angle Determination

The capillary bridge probe method was introduced previously as a high-accuracy contact angle determination method relying on capillary bridges on hydrophilic and superhydrophilic surfaces [Nagy, N. Langmuir 2019, 35 (15), 5202-5212]. In this work, the behavior of r-ϑ type liquid bridges was studied and the contact angles were determined on hydrophobic surfaces. The equilibrium shape of these liquid bridges often does not contain the neck or haunch region. The unknown neck/haunch radius prevents analytical evaluation of the capillary bridge shape. In this work, the possible incomplete liquid bridge shapes were classified and a novel procedure was developed for the Delaunay's analytical solution-based evaluation of these states. The parameter space of the capillary bridges was visualized and described without using dimensionless variables. As a demonstration, Cyclo Olefin Polymer and PTFE surfaces were investigated, with advancing and receding contact angles determined and compared to the results of sessile drop measurements.

Fundamentals and utilization of solid/ liquid phase boundary interactions on functional surfaces

The affinity of macroscopic solid surfaces or dispersed nano- and bioparticles towards liquids plays a key role in many areas from fluid transport to interactions of the cells with phase boundaries. Forces between solid interfaces in water become especially important when the surface texture or particles are in the colloidal size range. Although, solid-liquid interactions are still prioritized subjects of materials science and therefore are extensively studied, the related literature still lacks in conclusive approaches, which involve as much information on fundamental aspects as on recent experimental findings related to influencing the wetting and other wetting-related properties and applications of different surfaces. The aim of this review is to fill this gap by shedding light on the mechanism-of-action and design principles of different, state-of-the-art functional macroscopic surfaces, ranging from self-cleaning, photoreactive or antimicrobial coatings to emulsion separation membranes, as these surfaces are gaining distinguished attention during the ongoing global environmental and epidemic crises. As there are increasing numbers of examples for stimulus-responsive surfaces and their interactions with liquids in the literature, as well, this overview also covers different external stimulus-responsive systems, regarding their mechanistic principles and application possibilities.

Micro-replication platform for studying the structural effect of seed surfaces on wetting properties

Biological surfaces in plants are critical for controlling essential functions such as wettability, adhesion, and light management, which are linked to their adaptation, survival, and reproduction. Biomimetically patterned surfaces replicating the microstructures of plant surfaces have become an emerging tool for understanding plant–environment interactions. In this study, we developed a two-step micro-replication platform to mimic the microstructure of seed surfaces and demonstrated that this initial platform can be used to study seed surface–environment interactions. The two-step process involved the extraction of a simplified seed surface model from real seeds and micro-replication of the simplified seed surface model using nanoimprint lithography. Using Allium seeds collected from Mongolia and Central Asia as the model system, we studied the wettability of biological and synthetic seed surfaces. We could independently control the material properties of a synthetic seed surface while maintaining the microstructures and, thereby, provide clear evidence that Allium seed surfaces were highly wettable owing to the high surface energy in the epidermal material rather than a microstructural effect. We expect that this platform can facilitate study of the independent effect of microstructure on the interaction of seed surfaces with their surroundings and contribute to research on the evolution of plant–environment interactions.

Sequentially estimating the dynamic contact angle of sessile saliva droplets in view of SARS-CoV-2

Estimating the contact angle of a virus infected saliva droplet is seen to be an important area of research as it presents an idea about the drying time of the respective droplet and in turn of the growth of the underlying pandemic. In this paper we extend the data presented by Balusamy, Banerjee and Sahu ["Lifetime of sessile saliva droplets in the context of SARS-CoV-2," Int. J. Heat Mass Transf. 123, 105178 (2021)], where the contact angles are fitted using a newly proposed half-circular wrapped-exponential model, and a sequential confidence interval estimation approach is established which largely reduces both time and cost with regards to data collection.

Contact angle measurements: From existing methods to an open-source tool

Contact angle measurement is an effective way to investigate solid surface properties. The introduction of low-cost digital cameras, as well as software and libraries for image analysis, has made contact angle measurement potentially accessible to every laboratory. In this review, we provide a comparison of the main methods developed to evaluate contact angle from digital images, including the so-called Young-Laplace method, the circle and polynomial fittings, as well as the mask method. All methods have been implemented and compared analyzing virtual and real drop images in an open-source software, Dropen, developed as an app in MATLAB environment. The code enables single image analysis evaluation, for the robust automatic identification of the contact points and contact angle evaluation, with the goal of minimizing user inputs, automatizing the process and facilitating measurements for all users, from less experienced to advanced wetting experts. Dropen and its code are made available at BOA, the Bicocca Open Access public repository, for use and further development.

Emulsifying Properties of an Homologous Series of Medium- and Long-Chain d-Maltotriose Esters and their Impacts on the Viabilities of Selected Cell Lines

The development of functional as well as nutritional surfactants for the food industry remains a matter of great interest. In the present study, a series of 6″-O-acylmaltotriose monoesters bearing alkyl side chains of 10-18 carbons was prepared by enzymatic means. The emulsions derived from those monoesters incorporating palmitoyl, stearoyl, and oleoyl side chains generally displayed advantageous shelf-lives, superior resistance to environmental variations, and more favorable droplet size distributions as well as stronger cytotoxic effects against various cancer cell lines. Ester 6 was shown to significantly inhibit the proliferation of MCF-7 breast cancer cells by inducing G1 phase arrest. Specifically, the levels of the G1 phase-related markers cyclin D1 and cyclin E as well as the cycle-dependent kinase 4 were suppressed by this particular ester. This study thus reveals that maltotriose esters can not only serve as novel functional food emulsifiers but also act, in vitro, as notable cytotoxic agents through a well-defined mechanism-of-action.