A Mechanistic Approach on Oxygen Vacancy-Engineered CeO2 Nanosheets Concocts over an Oyster Shell Manifesting Robust Photocatalytic Activity toward Water Oxidation

Facile fabrication of B-rGO/ZnFe2O4 p-n heterojunction-based S-scheme exciton engineering for photocatalytic Cr(vi) reduction: kinetics, influencing parameters and detailed mechanism

The fabrication of p-n heterostructures was found to be an effective strategy to stimulate the interfacial exciton shipment and photocatalytic reactions. Herein, we report a p-n junction synthesized by combining p-type boron-doped reduced graphene oxide (B-rGO) with an n-type ZnFe2O4 semiconducting material for Cr(vi) reduction under LED light irradiation. The band structures of ZnFe2O4 and B-rGO were evaluated using UV-vis spectroscopy, Mott-Schottky (M-S) plots and photocurrent studies. The results indicated that ZnFe2O4 and B-rGO exhibit a conventional type-II charge transfer, and the Fermi-level (E F) of ZnFe2O4 was found to be much lower than that of the B-rGO material. Based on these investigations, an S-scheme charge-migration pathway was suggested and demonstrated by the photocatalytic activity and nitroblue tetrazolium (NBT) chloride experiments. The optimal 2 wt% B-rGO/ZnFe2O4 heterojunction exhibits the highest photocatalytic performance, i.e. 84% of Cr(vi) reduction in 90 min under 20 W LED light irradiation with a rate constant of 0.0207 min-1, which was 4.6- and 2.15-fold greater than that of ZnFe2O4 (ZnF) and B-rGO, respectively. The intimate interfacial contact, excellent photon-harvesting properties, effective exciton segregation and availability of active electrons are some factors responsible for enhanced photocatalytic Cr(vi) reduction. In order to fulfill the demand of applied waste-water management, the influences of various photocatalyst amounts, pH values and co-exiting ions on photocatalytic activities were evaluated. Finally, this work provides a way to fabricate S-scheme-based p-n-heterostructures for photocatalytic wastewater treatment.

Macroscopic Spontaneous Piezopolarization and Oxygen-Vacancy Coupled Robust NaNbO3/FeOOH Heterojunction for Pharmaceutical Drug Degradation and O2 Evolution: Combined Experimental and Theoretical Study

Prompt recombination of photoproduced charges in bulk and surface of a photocatalyst significantly impedes catalytic efficiency. To address these challenges, FeOOH nanorods (NRs) anchored NaNbO3 (NNO) piezoelectric microcubes (MCs) have been fabricated for ciprofloxacin (CIP) degradation and oxygen evolution through water splitting by coupling macroscopic spontaneous piezoelectric polarization and a built-in electric field. The local electric field induced by surface oxygen vacancies (Ovs) and orientation of FeOOH NRs over NNO MCs afford the polarization electric field a significant boost, driving the quick separation/migration of charge carriers from bulk to the surface. The polarized NNO/FeOOH composite with ample Ovs demonstrates an outstanding piezophotocatalytic CIP degradation of 93% in 1 h, higher than pristine materials (NNO and FeOOH), and a high O2 evolution rate of 1155 μmol h-1. The effect of piezoelectric polarization on the catalytic activity is supplemented by theoretical simulations. This work offers an avenue for selective pollutant remediation and water splitting through the rational design of piezoelectric polarization-mediated heterostructure systems with surface Ovs.

Preparation of NaNbO3 microcube with abundant oxygen vacancies and its high photocatalytic N2 fixation activity in the help of Pt nanoparticles

In this study, the photocatalytic N₂ immobilization performance of NaNbO₃ is enhanced via oxygen vacancy introduction and Pt loading. The designed Pt-loaded NaNbO₃ with rich oxygen defects (Pt/O-NaNbO₃) is synthesized by combining ion-exchange and photodeposition methods. Characterization result indicates that the O-NaNbO₃ has hollow microcube morphology and higher surface area than NaNbO₃. The introduced oxygen defects greatly affect the energy band structure. The band gap is slightly narrowed and the conduction band is raised, allowing O-NaNbO₃ to generate electrons with strong reducibility. Moreover, the oxygen defects reduced the work function of NaNbO₃, leading to increased charge separation in the bulk phase. The loaded Pt nanoparticles can further increase the surface charge separation via the formed Schottky barriers between Pt and O-NaNbO₃, which was thought to be the primary cause of the increased photocatalytic activity. Additionally, the oxygen vacancies and metal Pt also contribute to the adsorption and activation of N₂. Under the combined effect of the above changes, Pt/O-NaNbO₃ presents much higher photoactivity than NaNbO₃. The optimized NH₃ production rate reaches 293.3 μmol/L g^-1h^-1 under simulated solar light, which is approximately 2.2 and 20.2 times higher than that of O-NaNbO₃ and NaNbO₃, respectively. This research offers a successful illustration of how to improve photocatalytic N₂ fixation and may shed some light on how to design and construct efficient photocatalysts by combining several techniques.

Synthesis of Z-schemes 0D–3D heterojunction bi-functional photocatalyst with ZnInCuS alloyed QDs supported BiOI MF for H2O2 production and N2 fixation

Photocatalytic H2O2 and NH3 production on Zn–Cu–In–S QDs coupled with BiOI MFs via a Z-scheme charge transfer dynamic.

Regulating polymerization degree of heptazines in carbon nitride with fumaric acid to enhance photocatalytic activity

Carbon nitride (CN) has a wide range of applications in photocatalytic treatment of environmental pollution. One of key challenges in the field is to conveniently prepare CN with tunable band gap towards efficient pollution degradation, which can be overcome by regulating the polymerization degree of its heptazines. Herein, a facile and green strategy to construct CN through co-firing urea, melamine and fumaric acid was reported. By simply inducing appropriate amount of fumaric acid during amidation reaction between fumaric acid and amino groups, the distance between heptazines of CN could be modified to obtain optimized polymerization degree and morphology. Among the considered CN systems, the modulated CN sample with the doped ratio of 2.50: 0.50: 0.03 m urea/m melamine/m fumaric acid (CNF30) displayed remarkable photocatalytic ability due to the largest specific surface area, the lowest photoluminescence emission intensity, and narrowest band gap, which led to the highest 98.0% methyl orange degradation within 60 min under a 10 W lamp and room temperature with the harmless and valuable carboxylic acids products. This study provides a new sight for the design of photocatalysts with tunable band structure towards green and efficient photocatalytic degradation of environmental pollution.

Superlative photoelectrochemical properties of 3D MgCr-LDH nanoparticles influencing towards photoinduced water splitting reactions

In the present work, we report the synthesis of single system three-dimensional (3D) open porous structure of MgCr-LDH nanoparticles in a substrate-free path by using one-step formamide assisted hydrothermal reaction followed by visible light irradiation for significant photoelectrochemical (PEC) properties that manifest towards photocatalytic H₂ and O₂ production. The as-prepared nanostructured materials were characterized by various physico-chemical characterization techniques. Moreover, this unique synthetic approach produces 3D open porous network structure of MgCr-LDH nanoparticles, which were formed by stacking of numerous 2D nanosheets, for effective light harvestation, easy electronic channelization and unveil superlative PEC properties, including high current density (6.9 mA/cm²), small Tafel slope of 82 mV/decade, smallest arc of the Nyquist plot (59.1 Ω cm⁻²) and photostability of 6000 s for boosting water splitting activity. In addition, such perfectly self-stacked 2D nanosheets in 3D MgCr-LDH possess more surface active defect sites as enriched 50% oxygen vacancy resulting a good contact surface within the structure for effective light absorption along with easy electron and hole separation, which facilitates the adsorption of protons and intermediate for water oxidation. Additionally, the Cr³⁺ as dopant pull up the electrons from water oxidation intermediates, thereby displaying superior photocatalytic H₂ and O₂ production activity of 1315 μmol/h and 579 μmol/h, respectively. Therefore, the open 3D morphological aspects of MgCr-LDH nanoparticles with porous network structure and high surface area possess more surface defect sites for electron channelization and identified as distinct novel features of this kind of materials for triggering significant PEC properties, along with robustly enhance the photocatalytic water splitting performances.

Engineering an oxygen-vacancy-mediated step-scheme charge carrier dynamic coupling WO3−X/ZnFe2O4 heterojunction for robust photo-Fenton-driven levofloxacin detoxification

Schematic representation of the photo-Fenton degradation of levofloxacin under solar-light illumination.

Black titania an emerging photocatalyst: review highlighting the synthesis techniques and photocatalytic activity for hydrogen generation

The TiO₂ semiconductor photocatalyst is in the limelight of sustainable energy research in recent years because of its beneficial properties. However, its wide band-gap and rapid exciton recombination rate makes it a lame horse, and reduces its photocatalytic efficiency. Recently, researchers have developed facile methods for lowering the band-gap, so that it captures a wide range of solar spectrum, but the efficiency is still way behind the target value. After the discovery of black titania (B-TiO₂), the associated drawbacks of white TiO₂ and its modified forms were addressed to a large extent because it not only absorbs photons in a broad spectral range (UV to IR region), but also modifies the structural and morphological features, along with the electronic properties of the material, significantly boosting the catalytic performance. Hence, B-TiO₂ effectively converts solar energy into renewable chemical energy i.e. green fuel H₂ that can ultimately satisfy the energy crisis and environmental pollution. However, the synthesis techniques involved are quite tedious and challenging. Hence, this review summarizes various preparation methods of B-TiO₂ and the involved characterization techniques. It also discusses the different modification strategies adopted to improve the H₂ evolution activity, and hopes that this review acts as a guiding tool for researchers working in this field.