Single-Measurement Multiplexed Quantification of MicroRNAs from Human Tissue Using Catalytic Hairpin Assembly and Förster Resonance Energy Transfer

Tailorable biosensors for real-time monitoring of stress distribution in soft biomaterials and living tissues

Visualizing mechanical stress distribution in soft and live biomaterials is essential for understanding biological processes and improving material design. However, it remains challenging due to their complexity, dynamic nature, and sensitivity requirements, necessitating innovative techniques. Since polysaccharides are common in various biomaterials, a biosensor integrating a Förster resonance energy transfer (FRET)-based tension sensor module and carbohydrate-binding modules (FTSM-CBM) has been designed for real-time monitoring of the stress distribution of these biomaterials. By simple dripping or soaking, FTSM-CBM enables fast, reproducible and semiquantitative detection of both 2D and 3D stress distributions in polysaccharide-based hydrogels. Additionally, it provides valuable information such as microstructure hints and fracture site warnings. FTSM-CBM can also monitor the locomotion of maggots, which is not feasible with most existing techniques. Furthermore, by changing the CBM, FTSM-CBM can be expanded for various polysaccharide-based biomaterials. This study provides a powerful tool that may promote related research in life and materials science.

Detection of long mRNA sequences by a Y-shaped DNA probe with three target-binding segments

Tumor-related mRNA detection is significant and interesting. The current mRNA detection method has the challenge of quantifying long mRNA sequences. Herein, a Y-shaped DNA probe with three target-binding segments was developed to detect tumor-related mRNA. This Y-shaped DNA probe (Y-probe) was assembled by six single DNA strands. Among these DNA strands, two DNA strands contained the split G-quadruplex sequence, and two DNA strands were modified with a pair of fluorophore and quencher, which were used to produce the detectable signal. In the presence of a long target mRNA sequence, target mRNA was hybridized with the three target-binding segments of the Y-probe, resulting in the increased fluorescence of G-quadruplex specific dye Thioflavin T and the decreased fluorescence of fluorophore, which could achieve the ratio detection of target mRNA. The Y-probe exhibited a low detection limit of 17.53 nM. Moreover, this probe showed high accuracy due to the benefits of three target-binding segments.

A Cascade Signal Amplification Strategy for the Ultrasensitive Fluorescence Detection of Cu2+ via λ-Exonuclease-Assisted Target Recycling with Mismatched Catalytic Hairpin Assembly

Herein, an ultrasensitive DNAzyme-based fluorescence biosensor for detecting Cu2+ was designed using the cascade signal amplification strategy, coupling λ-exonuclease-assisted target recycling and mismatched catalytic hairpin assembly (MCHA). In the designed detection system, the target, Cu2+, can activate the Cu2+-dependent DNAzyme to cause a cleavage reaction, releasing ssDNA (tDNA). Then, tDNA binds to hairpin DNA (H0) with an overhanging 5'-phosphorylated terminus to form dsDNA with a blunt 5'-phosphorylated terminus, which activates the dsDNA to be digested by λ-Exo and releases tDNA along with another ssDNA (iDNA). Subsequently, the iDNA initiates MCHA, which can restore the fluorescence of carboxyfluorescein (FAM) previously quenched by tetramethylrhodamine (TAMRA), resulting in a strong fluorescent signal. Furthermore, MCHA efficiently improves the signal-to-noise ratio of the detection system. More importantly, tDNA recycling can be achieved with the λ-Exo digestion reaction to release more iDNA, efficiently amplifying the fluorescent signal and further improving the sensitivity to Cu2+ with a detection limit of 60 fM. The practical application of the developed biosensor was also demonstrated by detecting Cu2+ in real samples, proving it to be an excellent analytical strategy for the ultrasensitive quantification of heavy metal ions in environmental water sources.

The Dual-Response-Single-Amplification Fluorescent Nanomachine for Tumor Imaging and Gastric Cancer Diagnosis

Gastric cancer (GC) is one of the most common tumors worldwide and is the leading cause of tumor-related mortality. Traditional biomarkers and screening methods cannot meet the clinical demands. There is an urgent need for highly sensitive diagnostic markers as well as accurate quantification methods for early gastric cancer (EGC) screening. Here a dual-target cooperatively responsive fluorescent nanomachine by the innovative application of two targets─responsive strand migration system with a single-amplification-cycle element was developed for the simultaneous detection of GC biomarkers miR-5585-5p and PLS3 mRNA, which were selected by next-generation sequencing and RT-qPCR. It was also an RNA extraction-free, PCR-free, and nonenzymatic biosensor to achieve tumor cell imaging and serum diagnosis. Requiring only a 20 μL serum sample and 20 min incubation time, the nanomachine achieved an ultrasensitive detection limit of fM level with a broad linear range from fM to nM. More importantly, a higher AUC value (0.884) compared to the clinically used biomarker CA 72-4 was obtained by the nanomachine to distinguish GC patients successfully. Notably, for the key concerns of diagnosis of EGC patients, the nanomachine also achieved a satisfactory AUC value of 0.859. Taken together, this work has screened and obtained multiple biomarkers and developed a fluorescent nanomachine for combination diagnosis of GC, providing an ingenious design of a functionalized DNA nanomachine and a feasible strategy for the transformation of serum biomarkers into clinical diagnosis.

Programmable Clostridium perfringens Argonaute-Based, One-Pot Assay for the Multiplex Detection of miRNAs

Assays for the molecular detection of miRNAs are typically constrained by the level of multiplexing, especially in a single tube. Here, we report a general and programmable diagnostic platform by combining mesophilic Clostridium perfringens Argonaute (CpAgo) with exponential isothermal amplification (EXPAR), which is a dual-signal amplification strategy, allowing for the rapid and sensitive detection of multiple miRNAs with single-nucleotide discrimination in one pot. The CpAgo-based One-Pot (COP) assay achieved a limit of detection of 1 zM miRNA within 30 min of turnaround time and a wide concentration range. This COP assay was applied to simultaneously detect four miRNAs in a single tube from clinical serum samples, showing superior analytical performance in distinguishing colorectal cancer patients from healthy individuals. This programmable, one-pot, multiplex, rapid, and specific strategy offers great promise in scientific research and clinical applications.

Enrichment and detection of VEGF165 in blood samples on a microfluidic chip integrated with multifunctional units

In this paper, a multifunctional microfluidic chip integrated with a centrifugal separation zone, aqueous two-phase system (ATPS) mixing zone and enrichment detection zone was proposed and fabricated. An automatic and efficient separation and quantitative analysis method for vascular endothelial growth factor 165 (VEGF₁₆₅) in whole blood samples was established with the designed microfluidic chip. A blood sample was divided into blood cells and plasma in the centrifugation zone. In the ATPS mixing zone, plasma was mixed with PEG/KH₂PO₄ aqueous two-phase solution containing Apt-Au NP nanoprobes. In the enrichment detection zone, the mixture was separated on CN140 modified with a ZnO NP-anti VEGF₁₆₅ nanostructure. The VEGF₁₆₅ captured by Apt-Au NPs was distributed in the PEG phase, concentrated at the front of CN140 and combined with anti-VEGF₁₆₅ to form a sandwich structure. The sensitive detection of VEGF₁₆₅ was achieved through fluorescence resonance energy transfer between rhodamine B and Au NPs on the nanoprobe. Under the optimized rotation program, capillary and centrifugal forces propelled the fluid in the whole process of pretreatment and detection. The detection linear range was between 1 pg mL^-1 and 50 ng mL^-1, the detection limit of VEGF₁₆₅ in blood was 0.22 pg mL^-1 and the enrichment efficiency was 983. It was illustrated that a convenient and reliable way for detection of tumor markers based on the multifunctional microfluidic chip was provided and it has a potential value for early screening and prognosis of clinical cancer.

Signal differentiation models for multiple microRNA detection: a critical review

MicroRNAs (miRNAs) are a class of small, single-stranded non-coding RNAs which have critical functions in various biological processes. Increasing evidence suggested that abnormal miRNA expression was closely related to many human diseases, and they are projected to be very promising biomarkers for non-invasive diagnosis. Multiplex detection of aberrant miRNAs has great advantages including improved detection efficiency and enhanced diagnostic precision. Traditional miRNA detection methods do not meet the requirements of high sensitivity or multiplexing. Some new techniques have opened novel paths to solve analytical challenges of multiple miRNA detection. Herein, we give a critical overview of the current multiplex strategies for the simultaneous detection of miRNAs from the perspective of two different signal differentiation models, including label differentiation and space differentiation. Meanwhile, recent advances of signal amplification strategies integrated into multiplex miRNA methods are also discussed. We hope this review provides the reader with future perspectives on multiplex miRNA strategies in biochemical research and clinical diagnostics.

A duplex-specific nuclease (DSN) and catalytic hairpin assembly (CHA)-mediated dual amplification method for miR-146b detection

A novel method for detecting miRNA has been developed using a combination of duplex-specific nuclease signal amplification (DSNSA) and a catalytic hairpin assembly (CHA). In this work, a biotinylated trigger release (BTR) probe with a biotin group at the 3'-end and a CHA reaction sequence trigger as an initiator (catalyst I) at the 5'-end was designed to hybridize target miRNA. The DSN enzyme was introduced to initiate the DSNSA. The miRNA was released to consume more BTR probes and amplify the signals. Subsequently, streptavidin-coated magnetic beads (SA-MBs) were added to the DSNSA reaction solution to remove excess BTR probes that did not hybridize with miRNA, which would then separate BTR probes and catalyst-I, to ensure detection with high selectivity and sensitivity. The catalyst-I remaining in the solution could trigger the CHA reaction to enable signal amplification in the second step. The developed method exhibits a sensitive detection limit and excellent selectivity in identifying a high sequence homology among family members.

Target-Catalyzed Self-Assembly of DNA-Streptavidin Nanogel for Enzyme-Free miRNA Assay

Rapid, sensitive, specific, and user-friendly microRNA (miRNA) assays are in high demand for point-of-care diagnosis. Target-catalyzed toehold-mediated strand displacement (TMSD) has received increasing attention as an enzyme-free molecular tool for DNA detection. However, the application of TMSD to miRNA targets is challenging because relatively weak DNA/RNA hybridization leads to failure in the subtle kinetic control of multiple hybridization steps. Here, a simple method is presented for miRNA assay based on the one-pot self-assembly of Y-shaped DNAs with streptavidin via an miRNA-catalyzed TMSD cascade reaction. A single miRNA catalyzes the opening cycle of DNA hairpin loops to generate multiple Y-shaped DNAs carrying biotin and a quencher at the end of their arms. Introducing a single base-pair mismatch near the toehold facilitates RNA-triggered strand displacement while barely disturbing nonspecific reactions. The Y-shaped DNAs are self-assembled with fluorescently labeled streptavidin (sAv), which produces nanoscale DNA-sAv nanogel particles mediating efficient Förster resonance energy transfer in their 3D network. The enhancing effect dramatically reduces the detection limit from the nanomolar level to the picomolar level. This work proves that TMSD-based DNA nanogel with a base-pair mismatch incorporated to a hairpin structure is a promising approach towards sensitive and accurate miRNA assay.

Highly accelerated isothermal nucleic acid amplifications by butanol dehydration: simple, more efficient, and ultrasensitive

Enzyme-free isothermal amplification reactions for nucleic acid analysis usually take several hours to obtain sufficient detection sensitivity, which limits their practical applications. Herein, we report a butanol dehydration-based method to greatly improve both the efficiency and the sensitivity of nucleic acid detections by three types of enzyme-free isothermal amplification reactions. The reaction time has been shortened from 3 h to 5-20 min with higher sensitivities. Especially in the DNAzyme-based amplification, the detection limit can be lowered over 16 000-fold to 3 × 10^-17 mol L^-1 in 2 h compared to the normal 3 h-reaction. We demonstrate that the high amplification efficiencies are attributed to the greatly accelerated reaction rates in the extremely concentrated reaction solutions caused by the butanol dehydration. This approach enhances the potential of applications of isothermal amplification reactions in clinical rapid tests, nanostructure synthesis, etc. and is promising to expand to other types of chemical reactions.

Rapid and Wash-Free Time-Gated FRET Histamine Assays Using Antibodies and Aptamers

Histamine (HA) is an indicator of food freshness and quality. However, high concentrations of HA can cause food poisoning. Simple, rapid, sensitive, and specific quantification can enable efficient screening of HA in food and beverages. However, conventional assays are complicated and time-consuming, as they require multiple incubation, washing, and separation steps. Here, we demonstrate that time-gated Förster resonance energy transfer (TG-FRET) between terbium (Tb) complexes and organic dyes can be implemented in both immunosensors and aptasensors for simple HA quantification using a rapid, single-step, mix-and-measure assay format. Both biosensors could quantify HA at concentrations relevant in food poisoning with limits of detection of 0.19 μg/mL and 0.03 μg/mL, respectively. Excellent specificity was documented against the structurally similar food components tryptamine and l-histidine. Direct applicability of the TG-FRET assays was demonstrated by quantifying HA in spiked fish and wine samples with both excellent concentration recovery and agreement with conventional multistep enzyme-linked immunosorbent assays (ELISAs). Our results show that the simplicity and rapidity of TG-FRET assays do not compromise sensitivity, specificity, and reliability, and both immunosensors and aptasensors have a strong potential for their implementation in advanced food safety screening.

Multiplexed Biosensing and Bioimaging Using Lanthanide-Based Time-Gated Förster Resonance Energy Transfer

The necessity to scrutinize more and more biological molecules and interactions both in solution and on the cellular level has led to an increasing demand for sensitive and specific multiplexed diagnostic analysis. Photoluminescence (PL) detection is ideally suited for multiplexed biosensing and bioimaging because it is rapid and sensitive and there is an almost unlimited choice of fluorophores that provide a large versatility of photophysical properties, including PL intensities, spectra, and lifetimes.The most frequently used technique to detect multiple parameters from a single sample is spectral (or color) multiplexing with different fluorophores, such as organic dyes, fluorescent proteins, quantum dots, or lanthanide nanoparticles and complexes. In conventional PL biosensing approaches, each fluorophore requires a distinct detection channel and excitation wavelength. This drawback can be overcome by Förster resonance energy transfer (FRET) from lanthanide donors to other fluorophore acceptors. The lanthanides' multiple and spectrally narrow emission bands over a broad spectral range can overlap with several different acceptors at once, thereby allowing FRET from one donor to multiple acceptors. The lanthanides' extremely long PL lifetimes provide two important features. First, time-gated (TG) detection allows for efficient suppression of background fluorescence from the biological environment or directly excited acceptors. Second, temporal multiplexing, for which the PL lifetimes are adjusted by the interaction with the FRET acceptor, can be used to determine specific biomolecules and/or their conformation via distinct PL decays. The high signal-to-background ratios, reproducible and precise ratiometric and homogeneous (washing-free) sensing formats, and higher-order multiplexing capabilities of lanthanide-based TG-FRET have resulted in significant advances in the analysis of biomolecular recognition. Applications range from fundamental analysis of biomolecular interactions and conformations to high-throughput and point-of-care in vitro diagnostics and DNA sequencing to advanced optical encoding, using both liquid and solid samples and in situ, in vitro, and in vivo detection with high sensitivity and selectivity.In this Account, we discuss recent advances in lanthanide-based TG-FRET for the development and application of advanced immunoassays, nucleic acid sensing, and fluorescence imaging. In addition to the different spectral and temporal multiplexing approaches, we highlight the importance of the careful design and combination of different biological, organic, and inorganic molecules and nanomaterials for an adjustable FRET donor-acceptor distance that determines the ultimate performance of the diagnostic assays and conformational sensors in their physiological environment. We conclude by sharing our vision on how progress in the development of new sensing concepts, material combinations, and instrumentation can further advance TG-FRET multiplexing and accelerate its translation into routine clinical practice and the investigation of challenging biological systems.

Label- and enzyme-free plasmon-enhanced single molecule fluorescence detection of HIV DNA fragments based on a catalytic hairpin assembly

We developed a label- and enzyme-free single molecule fluorescence counting strategy for HIV DNA fragments detection. The nucleic acid biosensor consists of a 5' terminal connected with a triangular gold nanoplate, 3' terminal rich in guanine hairpin probe (HP1) and a hairpin probe HP2 complementary to the partial sequence of HP1. Without the existence of the target DNA, the DNA fragment rich in the guanine region is locked in a hairpin structure and cannot form a G-quadruplex, hence NMM exhibits a low fluorescence signal. When the target DNA exists, the hairpin assembly will trigger a strand displacement amplification reaction that produces a great number of G-quadruplexes, and the fluorescence brightness of NMM will be enhanced. The plasmon resonance effect of the triangular gold nanoplates will further amplify the fluorescence signal. This method can analyze the target DNA with high sensitivity and selectivity, and the detection limit is 0.83 fM. The analysis of the HIV DNA fragments in diluted human serum samples was successfully achieved, and the recovery rate was 92%-104%. Because of its easy operation and low cost, it has broad development potential in biochemical analysis and clinical applications.

Recent advances in catalytic hairpin assembly signal amplification-based sensing strategies for microRNA detection

Accumulative evidences have indicated that abnormal expression of microRNAs (miRNAs) is closely associated with many health disorders, making them be regarded as potentialbiomarkers for early clinical diagnosis. Therefore, it is extremely necessary to develop a highly sensitive, specific and reliable approach for miRNA analysis. Catalytic hairpin assembly (CHA) signal amplification is an enzyme-free toehold-mediated strand displacement method, exhibiting significant potential in improving the sensitivity of miRNA detection strategies. In this review, we first describe the potential of miRNAs as disease biomarkers and therapeutics, and summarize the latest advances in CHA signal amplification-based sensing strategies for miRNA monitoring. We describe the characteristics and mechanism of CHA signal amplification and classify the CHA-based miRNA sensing strategies into several categories based on the "signal conversion substance", including fluorophores, enzymes, nanomaterials, and nucleotide sequences. Sensing performance, limit of detection, merits and disadvantages of these miRNA sensing strategies are discussed. Moreover, the current challenges and prospects are also presented.

A self-quenching fluorescence probe-mediated exponential isothermal amplification system for highly sensitive and specific detection of microRNAs

We designed an efficient self-quenching fluorescence probe and constructed this probe-mediated exponential isothermal amplification system for miRNA detection. Owing to the significant improvement in the detective signal-to-background ratio, a wide dynamic range of 9 orders of magnitude and a limit of detection as low as 0.08 aM can be easily achieved in a single step. Furthermore, benefiting from the additional advantages of high specificity and biocompatibility, the proposed method has been demonstrated to be capable of accurately quantifying miRNA biomarkers in serum, which will provide promising perspectives for clinical diagnosis.

Recent advances in FRET-Based biosensors for biomedical applications

Fluorescence resonance energy transfer (FRET)-based biosensors are effective analytical tools extensively used in fields of biomedicine, pharmacology, toxicology, and food sciences. Ratiometric imaging of substantial cellular processes, molecular components, and biological interactions is widely performed by these biosensors. A variety of FRET-based biosensors have provided comprehensive insights into underlying mechanisms of pathological conditions in live cells, tissues, and organisms. Moreover, integration of FRET-based biosensors with the current bioanalytical techniques allows for accurate, rapid, and sensitive diagnosis and proposes the advanced strategies for treatment. Precise analysis of ligand-receptor interactions by FRET-based biosensors has presented a basis for determination of novel therapeutic agents. Therefore, this study was designed to review the recent developments in FRET-based biosensors and their biomedical applications. In addition, characteristics, challenges, and outlooks of these biosensors were discussed.

Short DNA-catalyzed formation of quantum dot-DNA hydrogel for enzyme-free femtomolar specific DNA assay

Fast, sensitive, specific, and user-friendly DNA assay is a key technique for the next generation point-of-care molecular diagnosis. However, high-cost, time-consuming, and complicated enzyme-based DNA amplification step is essential to achieve high sensitivity. Herein, a short target DNA-catalyzed formation of quantum dot (QD)-DNA hydrogel is proposed as a new DNA assay platform satisfying the above requirements. A single-stranded target DNA catalyzes the opening cycle of DNA hairpin loops, which are quickly self-assembled with DNA-functionalized QDs to generate QD-DNA hydrogel. The three-dimensional hydrogel network allows efficient resonance energy transfer, dramatically lowering the limit of detection down to ~6 fM without enzymatic DNA amplification. The QD-DNA hydrogel also enables a rapid detection (1 h) with high specificity even for a single-base mismatch. The clinical applicability of the QD-DNA hydrogel is demonstrated for the Klebsiella pneumoniae carbapenemase gene, one of the key targets of drug-resistant pathogenic bacteria.

A compact fiber-integrated optofluidic platform for highly specific microRNA Förster resonance energy transfer detection

MicroRNAs (miRNAs) have attracted extensive interest as promising biomarkers for the profiling of diseases. However, quantitative measurement of miRNAs presents a significant challenge in biochemical studies. In this work, we developed an innovative optofluidic platform to perform a rapid, simple, quantitative and high-specificity miRNA assay using the Förster resonance energy transfer (FRET) principle. A novel three-way junction FRET probe was proposed to enable rapid and enzyme-free miRNA detection. Using this platform, we performed one-step, amplification-free miRNA detection with simple device operation and achieved miRNA identification at a low concentration. The detection system could achieve high specificity for discrimination of three-base mismatches, and the sample volume was significantly reduced, favorable for low-level miRNA detection in material-limited samples. The establishment of a compact, low-cost, highly sensitive and selective miRNA analysis platform provides a valuable tool for point-of-care diagnosis.

Advances in multiplexed techniques for the detection and quantification of microRNAs

MicroRNA detection is currently a crucial analytical chemistry challenge: almost 2000 papers were referenced in PubMed in 2018 and 2019 for the keywords "miRNA detection method". MicroRNAs are potential biomarkers for multiple diseases including cancers, neurodegenerative and cardiovascular diseases. Since miRNAs are stably released in bodily fluids, they are of prime interest for the development of non-invasive diagnosis methods, such as liquid biopsies. Their detection is however challenging, as high levels of sensitivity, specificity and robustness are required. The analysis also needs to be quantitative, since the aim is to detect miRNA concentration changes. Moreover, a high multiplexing capability is also of crucial importance, since the clinical potential of miRNAs probably lays in our ability to perform parallel mapping of multiple miRNA concentrations and recognize typical disease signature from this profile. A plethora of biochemical innovative detection methods have been reported recently and some of them provide new solutions to the problem of sensitive multiplex detection. In this review, we propose to analyze in particular the new developments in multiplexed approaches to miRNA detection. The main aspects of these methods (including sensitivity and specificity) will be analyzed, with a particular focus on the demonstrated multiplexing capability and potential of each of these methods.

In Situ Rolling Circle Amplification Förster Resonance Energy Transfer (RCA-FRET) for Washing-Free Real-Time Single-Protein Imaging

Fluorescence signal enhancement via isothermal nucleic acid amplification is an important approach for sensitive imaging of intra- or extracellular nucleic acid or protein biomarkers. Rolling circle amplification (RCA) is frequently applied for fluorescence in situ imaging but faces limitations concerning multiplexing, dynamic range, and the required multiple washing steps before imaging. Here, we show that Förster resonance energy transfer (FRET) between fluorescent dyes and between lanthanide (Ln) complexes and dyes that hybridize to β-actin-specific RCA products in HaCaT cells can afford washing-free imaging of single β-actin proteins. Proximity-dependent FRET could be monitored directly after or during (real-time monitoring) dye or Ln DNA probe incubation and could efficiently distinguish between photoluminescence from β-actin-specific RCA and DNA probes freely diffusing in solution or nonspecifically attached to cells. Moreover, time-gated FRET imaging with the Ln-dye FRET pairs efficiently suppressed sample autofluorescence and improved the signal-to-background ratio. Our results present an important proof of concept of RCA-FRET imaging with a strong potential to advance in situ RCA toward easier sample preparation, higher-order multiplexing, autofluorescence-free detection, and increased dynamic range by real-time monitoring of in situ RCA.