Colorimetric and Electrochemical Dual-Signal Method for Water Toxicity Detection Based on Escherichia coli and p-Benzoquinone

Recent advances in electrochemical cell-based biosensors for food analysis: Strategies for sensor construction

Owing to their advantages such as great specificity, sensitivity, rapidity, and possibility of noninvasive and real-time monitoring, electrochemical cell-based biosensors (ECBBs) have been a powerful tool for food analysis encompassing the areas of nutrition, flavor, and safety. Notably, the distinctive biological relevance of ECBBs enables them to mimic physiological environments and reflect cellular behaviors, leading to valuable insights into the biological function of target components in food. Compared with previous reviews, this review fills the current gap in the narrative of ECBB construction strategies. The review commences by providing an overview of the materials and configuration of ECBBs, including cell types, cell immobilization strategies, electrode modification materials, and electrochemical sensing types. Subsequently, a detailed discussion is presented on the fabrication strategies of ECBBs in food analysis applications, which are categorized based on distinct signal sources. Lastly, we summarize the merits, drawbacks, and application scope of these diverse strategies, and discuss the current challenges and future perspectives of ECBBs. Consequently, this review provides guidance for the design of ECBBs with specific functions and promotes the application of ECBBs in food analysis.

Advances in electrochemical-optical dual-mode biosensors for detection of environmental pathogens

Electrochemical techniques are commonly used to analyze and screen various environmental pathogens. When used in conjunction with other optical recognition methods, it can extend the sensing range, lower the detection limit, and offer mutual validation. Nowadays, electrochemical-optical dual-mode biosensors have ensured the accuracy of test results by integrating two signals into one, indicating their potential use in primary food safety quantitative assays and screening tests. Particularly, visible optical signals from electrochemical/colorimetric dual-mode biosensors could meet the demand for real-time screening of microbial pathogens. While electrochemical-optical dual-mode probes have been receiving increasing attention, there is limited emphasis on the design approaches for sensors intended for microbial pathogens. Here, we review the recent progress in the merging of optical and electrochemical techniques, including fluorescence, colorimetry, surface plasmon resonance (SPR), and surface enhanced Raman spectroscopy (SERS). This study particularly emphasizes the reporting of various sensing performances, including sensing principles, types, cutting-edge design approaches, and applications. Finally, some concerns and upcoming advancements in dual-mode probes are briefly outlined.

Assessing fresh water acute toxicity with Surface-Enhanced Raman Scattering (SERS)

It's well known that the toxicity of chemicals in the environment depends not only their concentrations, but more importantly, their bio-availability. Thus, the acute toxicity test of environmental water samples is of great importance in water quality evaluation. In this work, water acute toxicity was determined via SERS approach for the first time based on the reaction between Escherichia coli (E. coli) and p-benzoquinone (BQ). The E. coli was used as the subject of toxicity assay. Under normal conditions, the BQ molecules can be transformed into Hydroquinone (HQ) by the E. coli bacteria; subsequently, the BQ will continue to react with the resulting HQ to form Quinone hydroquinone (QHQ). This process could be impaired in the presence of many toxic chemicals. Bromide modified Ag NPs was then introduced for the highly sensitive SERS detection of the product (HQ and QHQ). Several key factors that may affect water acute toxicity evaluation have been explored, which include the initial BQ and E. coli concentration, the incubation time with BQ, and the sodium chloride concentration. Later, the established system was applied for the toxicity evaluation of Cu2+. It was found that the IC50 value of Cu2+ was 0.94 mg/L, which is superior compared with literature report. This study provides a promising SERS method for assessing acute toxicity in water bodies with high sensitivity and short detection time.

Functionalized-Graphene Field Effect Transistor-Based Biosensor for Ultrasensitive and Label-Free Detection of β-Galactosidase Produced by Escherichia coli

The detection of β-galactosidase (β-gal) activity produced by Escherichia coli (E. coli) can quickly analyze the pollution degree of seawater bodies in bathing and fishing grounds to avoid large-scale outbreaks of water pollution. Here, a functionalized biosensor based on graphene-based field effect transistor (GFET) modified with heat-denatured casein was developed for the ultrasensitive and label-free detection of the β-gal produced by E. coli in real water samples. The heat-denatured casein coated on the graphene surface, as a probe linker and blocker, plays an important role in fabricating GEFT biosensor. The GFET biosensor response to the β-gal produced by E. coli has a wide concentration dynamic range spanning nine orders of magnitude, in a concentration range of 1 fg·mL-1-100 ng·mL-1, with a limit of detection (LOD) 0.187 fg·mL-1 (1.61 aM). In addition to its attomole sensitivity, the GFET biosensor selectively recognized the β-gal in the water sample and showed good selectivity. Importantly, the detection process of the β-gal produced by E. coli can be completed by a straightforward one-step specific immune recognition reaction. These results demonstrated the usefulness of the approach, meeting environmental monitoring requirements for future use.

A fluorescent covalent organic framework for visual detection of p-benzoquinone

P-benzoquinone (PBQ) is toxic and harmful for health. The development of portable sensor to realize the detection of PBQ is of great significance. Herein, a novel covalent organic framework (COF_ML-TFPB) with intramolecular charge transfer and aggregation induced emission properties was proposed via condensation reaction of melem (ML) and 1,3,5-tris (4-formylphenyl) benzene (TFPB). COF_ML-TFPB shows strong fluorescence in both solution and solid state and can be used for the fluorescence detection of PBQ. Due to the internal filtration effect and photoinduced electron transfer effect, PBQ can quench the fluorescence of COF_ML-TFPB. The developed COF_ML-TFPB fluorescent sensor displayed a wide linear range for PBQ from 0.138 ng mL^-1 - 35 μg mL^-1, and the detection limit was 0.046 ng mL^-1. In addition, fluorescent test paper for rapid and portable detection of PBQ was also developed by depositing COF_ML-TFPB on filter paper directly. It reduces the cost and time of detection and realizes the semiquantitative detection of PBQ. Moreover, the fluorescence color was converted into digital RGB value to calculate the concentration of PBQ accurately by a smartphone. This method realizes the portable qualitative and semiquantitative determination of PBQ.

Colorimetric and electrochemical integrated dual-mode detection of glucose by utilizing CoOOH@Cu nanosheets as peroxidase mimetics

Herein, we developed a colorimetric and electrochemical integrated dual-mode assay for glucose detection by utilizing CoOOH@Cu nanosheets as peroxidase mimetics. With the advantages of self-calibration, sensitivity and lower sample cost, this designed dual-mode assay offers great potential in blood glucose analysis.

Determining the Dose-Response Curve of Exoelectrogens: A Microscale Microbial Fuel Cell Biosensor for Water Toxicity Monitoring

Nowadays, the development of real-time water quality monitoring sensors is critical. However, traditional water monitoring technologies, such as enzyme-linked immunosorbent assay (ELISA), liquid chromatography, mass spectroscopy, luminescence screening, surface plasma resonance (SPR), and analysis of living bioindicators, are either time consuming or require expensive equipment and special laboratories. Because of the low cost, self-sustainability, direct current output and real-time response, microbial fuel cells (MFCs) have been implemented as biosensors for water toxicity monitoring. In this paper, we report a microscale MFC biosensor to study the dose-response curve of exoelectrogen to toxic compounds in water. The microscale MFC biosensor has an anode chamber volume of 200 μL, which requires less sample consumption for water toxicity monitoring compared with macroscale or mesoscale MFC biosensors. For the first time, the MFC biosensor is exposed to a large formaldehyde concentration range of more than 3 orders of magnitudes, from a low concentration of 1 × 10^-6 g/L to a high concentration of 3 × 10^-3 g/L in water, while prior studies investigated limited formaldehyde concentration ranges, such as a small concentration range of 1 × 10^-4 g/L to 2 × 10^-3 g/L or only one high concentration of 0.1 g/L. As a result, for the first time, a sigmoid dose-response relationship of normalized dose-response versus formaldehyde concentration in water is observed, in agreement with traditional toxicology dose-response curve obtained by other measurement techniques. The biosensor has potential applications in determining dose-response curves for toxic compounds and detecting toxic compounds in water.

Tetrazolium-Based Visually Indicating Bacteria Sensor for Colorimetric Detection of Point of Contamination

Protective equipment for detecting bacterial contamination has been in high demand with increasing interest in public health and hygiene. Herein, a fiber-based visually indicating bacteria sensor (VIBS) embedded with iodonitrotetrazolium chloride is developed for the general purpose of detecting live bacteria, and its chromogenic effectiveness is investigated for Gram-negative Escherichia coli and Gram-positive Micrococcus luteus. The developed color intensity is measured by the light absorption coefficient to the scattering coefficient (K/S) based on the Kubelka-Munk equation, and the colorimetric sensitivities of different membranes are examined by calculating the limit of detection (LOD) and the limit of quantification (LOQ). The results demonstrate that the interactions between VIBS and bacteria depend on the wetting properties of membranes. A hydrophobic membrane shows excessive interactions at high concentrations of Gram-negative E. coli bacteria, whose cell membrane is lipophilic. The membrane blended with hydrophobic and hydrophilic polymers displays linear colorimetric responses for both Gram-negative and Gram-positive bacteria strains, demonstrating a reliable sensing capability in the range of the tested bacteria concentration. This study is significant in that explorative experimentations are performed to conceive a proof of concept of a fiber-based bacteria sensor, which is readily applicable in various fields where bacteria pose a threat.

Plasma Functionalized Carbon Interfaces for Biosensor Application: Toward the Real-Time Detection of Escherichia coli O157:H7

Nonthermal plasma, a nondestructive, fast, and highly reproducible surface functionalization technique, was used to introduce desired functional groups onto the surface of carbon powder. The primary benefit is that it is highly scalable, with a high throughput, making it easily adaptable to bulk production. The plasma functionalized carbon powder was later used to create highly specific and low-cost electrochemical biosensors. The functional groups on the carbon surface were confirmed using NH₃-temperature-programmed desorption (TPD) and X-ray photoelectron spectroscopy (XPS) analysis. In addition, for biosensing applications, a novel, cost-effective, robust, and scalable electrochemical sensor platform comprising in-house-fabricated carbon paste electrodes and a miniaturized E-cell was developed. Biotin-Streptavidin was chosen as a model ligand-analyte combination to demonstrate its applicability toward biosensor application, and then, the specific identification of the target Escherchia coli O157:H7 was accomplished using an anti-E. coli O157:H7 antibody-modified electrode. The proposed biosensing platform detected E. coli O157:H7 in a broad linear range of (1 × 10^-1-1 × 10⁶) CFU/mL, with a limit of detection (LOD) of 0.1 CFU/mL. In addition, the developed plasma functionalized carbon paste electrodes demonstrated high specificity for the target E. coli O157:H7 spiked in pond water, making them ideal for real-time bacterial detection.