Photonic and Magnetic Dual-Responsive Molecularly Imprinted Sensor for Highly Specific Recognition of Enterovirus 71

In situ detection of dopamine in single living cells by molecularly imprinted polymer-functionalized nanoelectrodes

In situ detection of dopamine (DA) at single-cell level is critical for exploring neurotransmitter-related biological processes and diseases. However, the low content of DA and a variety of distractors with similar oxidation potentials as DA in cells brought great challenges. Here, a sensitive and specific electrochemical nanosensor was proposed for in situ detection of DA in single living cells based on nanodiamond (ND) and molecularly imprinted polymer (MIP)-functionalized carbon fiber nanoelectrode (ND/MIP/CFNE). Due to its excellent electrocatalytic property, ND was modified to the surface of CFNE based on amide bonding. Compared with bare CFNE, ND-modified CFNE can enhance oxidation currents of DA by about 4-fold, improving signal-to-noise ratio and detection sensitivity. MIP was further electropolymerized on the surface of nanoelectrodes to achieve specific capture and recognition of DA, which could avoid the interference of complex matrix and analogs in cells. Taking advantage of the precise positioning capability of a single-cell analyzer and micromanipulator, ND/MIP/CFNE could be precisely inserted into different locations of single cells and monitor oxidation signal of DA. The concentration of DA in the cytoplasm of single pheochromocytoma (PC12) cell was measured to be about 0.4 μM, providing a sensitive and powerful method for single-cell detection. Furthermore, the nanoelectrodes can monitor the fluctuation of intracellular DA under drug stimulation, providing new ideas and methods for new drug development and efficacy evaluation.

A Universal Aptamer for Influenza A Viruses: Selection, Recognition, and Infection Inhibition

It is crucial to develop universal inhibitors for viral inhibition due to the rapid mutation of viruses. Herein, a universal aptamer inhibitor was developed that enabled a single DNA molecule to recognize several hemeagglutinin (HA) protein subtypes, inducing broad neutralization against influenza A viruses (IAVs). Through a multi-channel enrichment (MCE) strategy, a high-affinity aptamer named UHA-2 was obtained, with its dissociation constants (Kd) for three different HA proteins being 1.5 ± 0.2 nM (H5N1), 3.7 ± 0.4 nM (H7N9), and 10.1 ± 1.1 nM (H9N2). The UHA-2 aptamer had a universal inhibition effect, by which it could broadly neutralize influenza A H5N1, H7N9, H9N2, H1N1, and H3N2 viruses. Universal aptamer inhibitors have the advantages of acquisition in vitro, stability, simple structure, small size, etc. This study not only develops a novel universal aptamer to achieve a broad inhibition effect on various IAVs, but also opens up an efficient strategy for the development of universal inhibitors against viruses.

Molecularly Imprinted Nanomaterials with Stimuli Responsiveness for Applications in Biomedicine

The review aims to summarize recent reports of stimuli-responsive nanomaterials based on molecularly imprinted polymers (MIPs) and discuss their applications in biomedicine. In the past few decades, MIPs have been proven to show widespread applications as new molecular recognition materials. The development of stimuli-responsive nanomaterials has successfully endowed MIPs with not only affinity properties comparable to those of natural antibodies but also the ability to respond to external stimuli (stimuli-responsive MIPs). In this review, we will discuss the synthesis of MIPs, the classification of stimuli-responsive MIP nanomaterials (MIP-NMs), their dynamic mechanisms, and their applications in biomedicine, including bioanalysis and diagnosis, biological imaging, drug delivery, disease intervention, and others. This review mainly focuses on studies of smart MIP-NMs with biomedical perspectives after 2015. We believe that this review will be helpful for the further exploration of stimuli-responsive MIP-NMs and contribute to expanding their practical applications especially in biomedicine in the near future.

A point-to-point "cap" strategy to construct a highly selective dual-function molecularly-imprinted sensor for the simultaneous detection of HAV and HBV

As an artificial biomimetic receptor, molecularly-imprinted polymer (MIP) has been widely used for the separation, enrichment and detection of various substances. However, due to the complexity of virus structure, huge volume and the existence of highly similar viruses, MIP shows unsatisfactory selectivity in virus detection. To overcome these issues, two kinds of virus nanoMIPs, just like a "cap", were synthesized by a solid-phase imprinting nanogel technique. The "cap" had no inner core and was much smaller than that of a conventional MIP, which was more favorable for mass transfer. Moreover, each "cap" could only combine with one target virus, which avoided the interference between large-volume virus molecules effectively. The two synthesized "caps" were mixed to construct a bifunctional MIP virus sensor for the simultaneous detection of Hepatitis A virus (HAV) and Hepatitis B virus (HBV). As expected, the selectivity factor (SF) for HBV detection reached 13.7, which was much higher than the reported virus MIP sensors (SF: 3-6), which was comparable to that of small molecular imprinting sensors. In addition, the high sensitivity toward HBV was 34.3 fM, and that of HAV was 27.1 pM. This method provides an idea for preparing high-selectivity biomacro-MIPs, as well as a method for the simultaneous detection of similar viruses with high sensitivity and selectivity. The recovery experiment of spiked serum showed that this method also has great practical application prospects.

Greenificated Molecularly Imprinted Materials for Advanced Applications

Molecular imprinting technology (MIT) produces artificial binding sites with precise complementarity to substrates and thereby is capable of exquisite molecular recognition. Over five decades of evolution, it is predicted that the resulting host imprinted materials will overtake natural receptors for research and application purposes, but in practice, this has not yet been realized due to the unsustainability of their life cycles (i.e., precursors, creation, use, recycling, and end-of-life). To address this issue, greenificated molecularly imprinted polymers (GMIPs) are a new class of plastic antibodies that have approached sustainability by following one or more of the greenification principles, while also demonstrating more far-reaching applications compared to their natural counterparts. In this review, the most recent developments in the delicate design and advanced application of GMIPs in six fast-growing and emerging fields are surveyed, namely biomedicine/therapy, catalysis, energy harvesting/storage, nanoparticle detection, gas sensing/adsorption, and environmental remediation. In addition, their distinct features are highlighted, and the optimal means to utilize these features for attaining incredibly far-reaching applications are discussed. Importantly, the obscure technical challenges of the greenificated MIT are revealed, and conceivable solutions are offered. Lastly, several perspectives on future research directions are proposed.

Construction of an Ultrasensitive Molecularly Imprinted Virus Sensor Based on an "Explosive" Secondary Amplification Strategy for the Visual Detection of Viruses

Viral outbreaks have caused great disruptions to the economy and public health in recent years. The accurate detection of viruses is a key factor in controlling and overcoming epidemics. In this study, an ultrasensitive molecularly imprinted virus sensor was developed based on an "explosive" secondary amplification strategy. Magnetic particles coated with carbon quantum dots (Fe₃O₄@CDs) were used as carriers and fluorescent probes, while aptamers were introduced into the imprinting layer to enhance the specific recognition of the target virus enterovirus 71 (EV71). When EV71 was captured by the imprinted particles, the fluorescence of the CDs was quenched, especially after binding to the aptamer-modified ZIF-8 loaded with a large amount of phenolphthalein, thereby resulting in signal amplification. Then, when adjusting the pH of the solution to 12, the decomposition of ZIF-8 released phenolphthalein, which turned the solution red, leading to the second "explosive" amplification of the signal. Therefore, the detection of EV71 with ultrasensitivity was achieved, which allows for visual detection by the naked eye in the absence of any instruments. The detection limits for fluorescence and visualization detection were 8.33 fM and 2.08 pM, respectively. In addition, a satisfactory imprinting factor of 5.4 was achieved, and the detection time only needed 20 min. It is expected that this fluorescence-colorimetric dual-mode virus molecularly imprinted sensor will show excellent prospects in epidemic prevention and rapid clinical diagnosis.