MXene Enhanced Photoactivity of Bi2O3/Bi2S3 Heterojunction with G-wire Superstructure for Photoelectrochemical Detection of TET1 Protein

Cu2O-Mediated Heterojunction Conversion from Dual Type II to Dual Z-Scheme: Its Application in Photoelectric-Colorimetric Dual-Mode Detection of Fat Mass and Obesity-Associated (FTO) Protein

Although the construction of heterojunction has been used in photoelectrochemical (PEC) biosensors, their potential for tunable optical properties has not been deeply explored. Based on the fact that a type-II heterojunction and Z-scheme heterojunction have the same energy band structure, effective alteration of the electron transfer pathway has been achieved by introducing unique photoactive materials into the system and exploiting the interactions between the photomaterials. Based on this, we reported a novel polarity-switchable dual-mode sensor for fat mass and obesity-associated (FTO) protein analysis. Specifically, the MgIn2S4/Bi2MoO6/Bi2S3 dual type-II heterojunction was used as the sensing interface in concert with the rolling circle amplification, CRISPR/Cas12, and terminal DNA transfer enzyme multiamplification strategies, and finally, Cu2O was captured at the sensing interface. Due to the matched energy band, the introduction of Cu2O effectively changed the electron transfer pathway and realized the conversion from a dual type-II heterojunction to a dual Z-scheme heterojunction. It caused the switch of the photocurrent from the anode to the cathode. The developed PEC method showed high sensitivity and selectivity for FTO protein detection in the range of 0.0005-500 μg/L. In addition, based on the peroxidase-like activity of Cu2O to catalyze the oxidation of 3,3',5,5'-tetramethylbenzidine by H2O2, the electrode system also achieved the colorimetric detection of FTO protein using the naked eye with the change of the color of the detection solution from colorless to blue. The detection range was from 0.05 to 500 μg/L. This work developed a photoelectrochemical-colorimetric biosensing platform with consciously designed semiconductor structures, revealing the potential of semiconductor-structured transformations in future sensing fields.

Dual-mode biosensor using Tb-Cu MOF@Au nanoenzyme to effectively quench the photocurrent of Bi2O3/Bi2S3/AgBiS2 heterojunction and emit fluorescence for neuron-specific enolases detection

A novel dual-mode biosensor was constructed for the ultrasensitive detection of neuron-specific enolase (NSE), utilizing Tb-Cu MOF@Au nanozyme as the signal label to effectively quench the photoelectrochemical (PEC) signals of Bi2O3/Bi2S3/AgBiS2 composites and initiate fluorescent (FL) signals. First, Bi2O3/Bi2S3/AgBiS2 heterojunction with excellent photoelectric activity was selected as the substrate material to provide a stable photocurrent. The well-matched energy levels significantly enhanced the separation and transfer of photogenerated carriers. Second, a strategy of consuming ascorbic acid (AA) by Tb-Cu MOF@Au nanozyme was introduced to improve the sensitivity of the PEC/FL biosensor. Tb-Cu MOF@Au not only could catalyze the oxidation of AA, but the steric effect further reduced the contact of AA with the substrate. More importantly, in the presence of H2O2, a significant fluorescence was produced from Tb3+ sensitized by the oxidation products of AA. Based on the above strategies, a highly stable and sensitive dual-mode biosensor was proposed for accurate NSE determination. Third, the developed dual-mode biosensor demonstrated excellent performance in detecting NSE. In this study, the PEC method demonstrated a wide detection range from 0.00005 to 200 ng/mL with a low detection limit of 20 fg/mL. The FL method exhibited a linear range from 0.001 to 200 ng/mL with a detection limit of 0.65 pg/mL. The designed biosensor showed potential practical implications in the accurate detection of disease markers.

Enzymatically Mediated In Situ Generation of Z-Scheme Bi2S3/Bi2MoO6 Heterojunction-Based Organic Photoelectrochemical Transistor for METTL3/METTL14 Detection

The OPECT biosensing platform, which connects optoelectronics and biological systems, offers significant amplification and more possibilities for research in biological applications. In this work, a homogeneous organic photoelectrochemical transistor (OPECT) biosensor based on a Bi2S3/Bi2MoO6 heterojunction was constructed to detect METTL3/METTL14 protein activity. The METTL3/METTL14 complex enzyme was used to catalyze adenine (A) on an RNA strand to m6A, protecting m6A-RNA from being cleaved by an E. coli toxin (MazF). Alkaline phosphatase (ALP) catalyzed the conversion of Na3SPO3 to H2S through an enzymatic reaction. Due to the adoption of the strategy of no fixation on the electrode, the generated H2S was easy to diffuse to the surface of the ITO electrode. The Bi2S3/Bi2MoO6 heterojunction was formed in situ through a chemical replacement reaction with Bi2MoO6, improving photoelectric conversion efficiency and realizing signal amplification. Based on this "signal on" mode, METTL3/METTL14 exhibited a wide linear range (0.00001-25 ng/μL) between protein concentration and photocurrent intensity with a limit of detection (LOD) of 7.8 fg/μL under optimal experimental conditions. The applicability of the developed method was evaluated by investigating the effect of four plasticizers on the activity of the METTL3/METTL14 protein, and the molecular modeling technique was employed to investigate the interaction between plasticizers and the protein.

Research progress of human key DNA and RNA methylation-related enzymes assay

Gene methylation-related enzymes (GMREs) are disfunction and aberrantly expressed in a variety of cancers, such as lung, gastric, and pancreatic cancers and have important implications for human health. Therefore，it is critical for early diagnosis and therapy of tumor to develop strategies that allow rapid and sensitive quantitative and qualitative detection of GMREs. With the development of modern analytical techniques and the application of various biosensors, there are numerous methods have been developed for analysis of GMREs. Therefore, this paper provides a systematic review of the strategies for level and activity assay of various GMREs including methyltransferases and demethylase. The detection methods mainly involve immunohistochemistry, colorimetry, fluorescence, chemiluminescence, electrochemistry, etc. Then, this review also addresses the coordinated role of various detection probes, novel nanomaterials, and signal amplification methods. The aim is to highlight potential challenges in the present field, to expand the analytical application of GMREs detection strategies, and to meet the urgent need for future disease diagnosis and intervention.

Ascorbic Acid Induced the Improved Oxygen Vacancy Defects of Bi4O5Br2 and Its Application on Photoelectrochemical Detection of DNA Demethylase MBD2 with Improved Detection Sensitivity

Oxygen vacancy defects (OVs) are one of the main strategies for nanomaterials modification to improve the photoactivity, but current methods for fabricating OVs are usually complicated and harsh. It is important to develop simple, rapid, safe, and mild methods to fabricate OVs. By studying the effects of different weak reducing agents, the concentration of the reducing agent and the reaction time on fabrication of OVs, it is found that L-ascorbic acid (AA) gently and rapidly induces the increase of OVs in Bi4O5Br2 at room temperature. The increased OVs not only improve the adsorption of visible light, but also enhance the photocurrent response. Based on this, the preparation of OVs in Bi4O5Br2 is employed to the development of a photoelectrochemical biosensor for the detection of DNA demethylase of methyl-CpG binding domain protein 2 (MBD2). The biosensor shows a wide linear range of 0.1-400 ng mL-1 and a detection limit as low as 0.03 ng mL-1 (3σ). In addition, the effect of plasticizers on MBD2 activity is evaluated using this sensor. This work not only provides a novel method to prepare OVs in bismuth rich materials, but also explores a new novel evaluation tool for studying the ecotoxicological effects of contaminants.

Efficient sensitization of CdTe QDs towards PTCDA for sensitive photoelectrochemical Hg2+ assay

Herein, a sensitive photoelectrochemical (PEC) biosensor was designed for the detection of mercury ions (Hg2+) on the basis of the efficient sensitization of cadmium telluride quantum dots (CdTe QDs) towards 3,4,9,10-perylenetetracarboxylic dianhydride (PTCDA) and the significant quenching ability of a thymine-Hg2+-thymine (T-Hg2+-T) structure. The proposed CdTe QD/PTCDA sensitized structure was successfully constructed via continuous incubation of PTCDA and CdTe QDs on the glassy carbon electrode (GCE) interface, which embraced strong light absorption capacity and high carrier separation efficiency, giving rise to a remarkably improved initial photocurrent response. Notably, the PEC signal generated from the CdTe QD/PTCDA sensitized structure was almost fivefold higher than that of PTCDA owing to the efficient sensitization of CdTe QDs towards PTCDA. Once target Hg2+ ions were added, a T-rich S1 strand modified on the surface of 1-hexanethiol (HT)/S1/gold nanoparticles (Au NPs)/CdTe QDs/PTCDA/GCE immediately reacted with Hg2+ to produce multiple stable T-Hg2+-T structures. Therefore, the initial PEC signal would be considerably quenched by a high steric hindrance effect derived from the T-Hg2+-T structures. As a result, a quenched PEC response could achieve the detection of Hg2+ in concentrations ranging from 100 fM to 1000 nM. More importantly, the combination of the CdTe QDs/PTCDA sensitization structure and the T-Hg2+-T structure paves a promising pathway to developing a novel PEC biosensing platform for Hg2+ detection and also provides a favorable strategy for monitoring environmental pollution related to Hg2+.

MXene-Enhanced Bi2S3/CdIn2S4 Heterojunction Photosensitive Gate for DEHP Detection in a Signal-On OPECT Aptamer Biosensor

Organic electrochemical transistors with signal amplification and good stability are expected to play a more important role in the detection of environmental pollutants. However, the bias voltage at the gate may have an effect on the activity of vulnerable biomolecules. In this work, a novel organic photoelectrochemical transistor (OPECT) aptamer biosensor was developed for di(2-ethylhexyl) phthalate (DEHP) detection by combining photoelectrochemical analysis with an organic electrochemical transistor, where MXene/Bi2S3/CdIn2S4 was employed as a photoactive material, target-dependent DNA hybridization chain reaction was used as a signal amplification unit, and Ru(NH3)63+ was selected as a signal enhancement molecule. The poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate)-based OPECT biosensor modulated by the MXene/Bi2S3/CdIn2S4 photosensitive material achieved a high current gain of nearly a thousand times at zero bias voltage. The developed signal-on OPECT sensing platform realized sensitive and specific detection of DEHP, with a detection range of 1-200 pM and a minimum detection limit of 0.24 pM under optimized experimental conditions, and its application to real water samples was also evaluated with satisfactory results. Hence, the construction of this OPECT biosensing platform not only provides a promising tool for the detection of DEHP but also reveals the great potential of the OPECT application for the detection of other environmental toxins.

Photoelectrochemical sensor for histone deacetylase Sirt1 detection based on Z-scheme heterojunction of CuS-BiVO4 photoactive material and the cyclic etching of MnO2 by NADH

A novel photoelectrochemical (PEC) biosensor was constructed for histone deacetylase Sirt1 detection based on the Z-Scheme heterojunction of CuS-BiVO4 and reduced nicotinamide adenine dinucleotide (NADH) induced cyclic etching of MnO2 triggered by Sirt1 enzyme catalytic histone deacetylation event. Based on the Z-Scheme heterojunction, the photoactivity of the CuS-BiVO4 was improved greatly due to the highly effective separation of the photogenerated electron-hole pairs. In the presence of MnO2 nanosheets on the CuS-BiVO4/ITO electrode surface, the photocurrent decreased due to the inhibition effect of MnO2. However, this inhibition effect was eliminated by the incubation of MnO2/CuS-BiVO4/ITO with NADH, where NADH was produced in the deacetylation process of acetylated peptide catalyzed by Sirt1 with NAD+. The formed NADH etched MnO2, resulting in an increased photocurrent. In this process, NADH was oxidized to produce NAD+, which further involved the deacetylation process. Based on this cycle, the photocurrent of the biosensor was improved greatly and the sensitive and selective detection of Sirt1 was achieved. The biosensor presented a wide linear range from 0.005 to 10 nM with the low detection limit of 3.38 pM (S/N = 3). In addition, the applicability of the developed method was evaluated by investigating the effect of sodium butyrate and perfluorohexane sulfonate on Sirt1 activity.

Tetrahedral DNA Nanostructure-Engineered Paper-Based Electrochemical Aptasensor for Fumonisin B1 Detection Coupled with Au@Pt Nanocrystals as an Amplification Label

Fumonisin B1 (FB1), as one of the highest toxicity mycotoxins, poses a serious threat to animal and human health, even at low concentrations. It is significant and challenging to develop a sensitive and reliable analytical device. Herein, a paper-based electrochemical aptasensor was designed utilizing tetrahedral DNA nanostructures (TDNs) to controllably anchor an aptamer (Apt), improving the recognition efficiency of Apt to its target. First, gold nanoparticles (AuNPs)@MXenes were used as a sensing substrate with good conductivity and modified on the electrode for immobilization of complementary DNA-TDNs (cDNA-TDNs). In the absence of FB1, numerous Apt-Au@Pt nanocrystals (NCs) was hybridized with cDNA and assembled on the sensing interface, which accelerated the oxidation of TMB with H2O2 and produced a highly amplified differential pulse voltammetry (DPV) signal. When the target FB1 specifically bound to its Apt, the electrochemical signal was decreased by releasing the Apt-Au@Pt NCs from double-stranded DNA (dsDNA). On account of the strand displacement reaction by FB1 triggering, the aptasensor had a wider dynamic linear range (from 50 fg/mL to 100 ng/mL) with a lower limit of detection (21 fg/mL) under the optimized conditions. More impressively, the designed FB1 aptasensor exhibited satisfactory performance in corn and wheat samples. Therefore, the TDN-engineered sensing platform opens an effective approach for sensitive and accurate analysis of FB1, holding strong potential in food safety and public health.

A dual-model immobilization-free photoelectrochemical/visual colorimetric bioanalysis based on microemulsion self-assemblies mediated multifunctional signal amplification strategy

Herein, a novel silver ion-loaded gold microemulsion assemblies (Au/Ag+ MAs) mediated multifunctional signal amplification strategy was proposed to construct a sensitive immobilization-free photoelectrochemical (PEC)/colorimetric biosensor for carcinoembryonic antigen (CEA) detection. Through the sandwiched reaction among CEA, the CEA aptamer (DNA1) loaded on the Au nanoparticles (NPs) functionalized iron oxide (Fe3O4) nanospheres and another CEA aptamer (DNA2) immobilized on Au/Ag+ MAs, a complex is formed and acquired by magnetic separation. Then, Au/Ag+ MAs of the complex are disassembled into Au NPs and Ag+ ions driven by an acetone response, and the obtained demulsification solution is transferred to the cadmium sulfide/cadmium telluride (CdS/CdTe) photoactive composites modified electrode. Based on the multiple inhibition functions (blocking effect of oleylamine; energy transfer effect of Au NPs; and electron snatching effect of Ag+), the photocurrent of the electrode decreases obviously, resulting in the ultrasensitive detection of CEA (a detection limit of 16 fg mL-1). Interestingly, the ion-exchange reactions between CdS/CdTe composites and Ag+ ions generate silver sulfide/silver telluride (Ag2S/Ag2Te) composites, and a color change of composites can be distinguished directly, leading to a quick visual detection of CEA. Compared with the traditional single-modal assay for CEA, such dual-modal PEC/colorimetric assay is a more accurate and reliable due to different mechanisms and independent signal conversion. This work will offer a new perspective for the applications of various self-assemblies in PEC bioanalysis.

Efficient Three-Dimensional DNA Nanomachine Guided by a Robust Tetrahedral DNA Nanoarray Structure for the Rapid and Ultrasensitive Electrochemical Detection of Matrix Metalloproteinase 2

Herein, a giant-sized DNA nanoarray was subtly assembled by two kinds of independent tetrahedral DNA structures as the DNA track for a multi-armed three-dimensional (3D) DNA nanomachine to perform signal transduction and amplification efficiently, which was developed as an electrochemical biosensor for the rapid and ultrasensitive detection of matrix metalloproteinase 2 (MMP-2). Impressively, in contrast to conventional DNA walkers with inefficiency, which walked on random DNA tracks composed of a two-dimensional (2D) probe or a one-dimensional (1D) single-stranded (ss)DNA probe, the multi-armed 3D DNA nanomachine from exonuclease III (Exo III) enzyme-assisted target recycling amplification would be endowed with faster reaction speed and better walking efficiency because of the excellent rigidity and orderliness of the tetrahedral DNA nanoarray structure. Once the hairpin H3-label with the signal substance ferrocene (Fc) was added to the modified electrode surface, the multi-armed 3D DNA nanomachine would be driven to move along the well-designed nanoarray tracks by toehold-mediated DNA strand displacement, resulting in most of the ferrocene (Fc) binding to the electrode surface and a remarkable increase in electrochemical signals within 60 min. As a proof of concept, the prepared biosensor attained a low detection limit of 11.4 fg/mL for the sensitive detection of the target MMP-2 and was applied in Hela and MCF-7 cancer cell lysates. As a result, this strategy provided a high-performance sensing platform for protein detection in tumor diagnosis.

Label-free and sensitive fluorescent sensing of ten-eleven translocation enzyme via cascaded recycling signal amplifications

The sensitive detection of ten-eleven translocation (TET) dioxygenase is of significance for understanding the demethylation mechanism of 5-methylocytosine (5mC), which is responsible for a wide range of biological functions that can affect gene expression in eukaryotic species. Here, a non-label and sensitive fluorescence biosensing method for TET assay using TET1 as the model target molecule is established on the basis of target-triggered Mg²⁺-dependent DNAzyme and catalytic hairpin assembly (CHA)-mediated multiple signal amplification cascades. 5mC sites in the hairpin DNA probe are first oxidized by TET1 into 5-carboxycytosine, which are further reduced by pyridine borane into dihydrouracil, followed by its recognition and cleavage by the USER enzyme to liberate active DNAzyme and G-quadruplex sequences from the probe. The DNAzyme further cyclically cleaves the substrate hairpins to trigger subsequent CHA reaction and DNAzyme cleavage cycles for yielding many G-quadruplex strands. Thioflavin T dye then intercalates into G-quadruplexes to cause a magnificent increase of fluorescence for high sensitivity assay of TET1 with 47 fM detection limit. And, application of this method for TET1 monitoring in diluted serum has also been confirmed.