General Strategy to Fabricate Electrochemiluminescence Sandwich-Type Nanoimmunosensors Using CdTe@ZnS Quantum Dots as Luminescent Labels and Fe3O4@SiO2 Nanoparticles as Magnetic Separable Scaffolds

A ratiometric molecular imprinted electrochemiluminescence sensor based on enhanced luminescence of CdSe@ZnS quantum dots by MXene@NaAsc for detecting uric acid

An unlabeled ratiometric molecular imprinted electrochemiluminescence sensor was developed for the determination of trace uric acid, based on MXene@NaAsc nanocomposites, CdSe@ZnS quantum dots and molecularly imprinted polymer composites modified glass carbon electrode. MXene@NaAsc stably enhanced the electron transfer and improved electrochemiluminescence intensity by acting as a base platform and signal amplifier for CdSe@ZnS quantum dots. Specific molecular imprinting cavities based on electropolymerization with o-phenylenediamine were formed to specifically identify uric acid. Combining the good sensitivity of electrochemiluminescence and the excellent selectivity of molecularly imprinted polymer, the ratio of optical signal and electrical signal was used as a comprehensive signal to achieve the detection of uric acid. Based on this, uric acid was detected in the range from 1 × 10-10 to 1 × 10-4 mol/L with the LOD of 18.13 pmol/L (S/N = 3). The developed sensor with easy preparation, great selectivity and excellent sensitivity could successfully detect uric acid in human serum.

Nanomaterials Connected to Bioreceptors to Introduce Efficient Biosensing Strategy for Diagnosis of the TORCH Infections: A Critical Review

TORCH infection is a significant risk factor for severe fetal damage, especially congenital malformations. Screening pregnant women for TORCH pathogens could reduce the incidence of adverse pregnancy outcomes and prevent birth defects. Hence, timely identification and inhibition of TORCH infections are effective ways to successfully prevent them in pregnant women. Recently, the superiority of biosensors in TORCH pathogen sensing has been emphasized due to their intrinsic benefits, such as rapid response time, portability, cost-effectiveness, much friendlier preparation and determination steps. With the introduction of advanced nanomaterials into biosensing, the diagnostic properties of biosensors have significantly improved. This study core presents and debates the current progress in biosensing systems for TORCH pathogens using various artificial and natural receptors. The incorporation of nanomaterials into various transduction systems can enhance diagnostic performance. The key performance characteristics of optical and electrochemical biosensors, such as response time, limit of detection (LOD), and linear detection range, are systematically discussed, along with the current TORCH pathogens used for constructing biosensors. Finally, the major problems that exist for converting scientific investigation into product development are also outlined.

Dual-Signal-Encoded Barcodes with Low Background Signal for High-Sensitivity Analysis of Multiple Tumor Markers

The suspension array technology (SAT) is promising for high-sensitivity multiplexed analysis of tumor markers. Barcodes as the core elements of SAT, can generate encoding fluorescence signals (EFS) and detection fluorescence signals (DFS) in the corresponding flow cytometer channel. However, the bleed-through effect of EFS in the DFS channel and the reagent-driven non-specific binding (NSB) lead to background interference for ultrasensitive assay of multiple targets. Here, we report an ingenious method to eliminate background interference between barcode and reporter using low-background dual-signal-encoded barcodes (DSBs) based on microbeads (MBs) and quantum dots (QDs). The low-background DSBs were prepared via combination strategy of two signals containing scatter signals and fluorescence signals. Three types of MBs were distinguished by the scattering channel of flow cytometer (FSC vs. SSC) to obtain the scattered signals. Green quantum dots (GQDs) or red quantum dots (RQDs) were coupled to the surface of MBs by sandwich immune structure to obtain the distinguishable fluorescent signals. Furthermore, the amount of conjugated capture antibody on the MB’s surface was optimized by comparing the change of detection sensitivity with the addition of capture antibody. The combination measurements of specificity and NSB in SAT platform were performed by incubating the capture antibody-conjugated MBs (cAb-MBs) with individual QD-conjugated detection antibody (QDs-dAb). Finally, an SAT platform based on DSBs was successfully established for highly sensitive multiplexed analysis of six tumor markers in one test, which suggests the promising tool for highly sensitive multiplexed bioassay applications.

A Comprehensive Review on the Use of Metal–Organic Frameworks (MOFs) Coupled with Enzymes as Biosensors

Several studies have shown the development of electrochemical biosensors based on enzymes immobilized in metal–organic frameworks (MOFs). Although enzymes have unique properties, such as efficiency, selectivity, and environmental sustainability, when immobilized, these properties are improved, presenting significant potential for several biotechnological applications. Using MOFs as matrices for enzyme immobilization has been considered a promising strategy due to their many advantages compared to other supporting materials, such as larger surface areas, higher porosity rates, and better stability. Biosensors are analytical tools that use a bioactive element and a transducer for the detection/quantification of biochemical substances in the most varied applications and areas, in particular, food, agriculture, pharmaceutical, and medical. This review will present novel insights on the construction of biosensors with materials based on MOFs. Herein, we have been highlighted the use of MOF for biosensing for biomedical, food safety, and environmental monitoring areas. Additionally, different methods by which immobilizations are performed in MOFs and their main advantages and disadvantages are presented.

Novel dual-sensitization electrochemiluminescence immunosensor using photopermeable Ru(bpy)3 2+ -doped chitosan/SiO2 nanoparticles as labels and chitosan-decorated Nafion/MWNTs composites as enhancer

A novel dual-sensitization electrochemiluminescence (ECL) immunosensor for the detection of tumour protein prostate specific antigen (PSA) at trace level using Ru(bpy)₃ ²⁺ -doped chitosan/SiO₂ nanoparticles (Ru(bpy)₃ ²⁺ /chitosan/SiO₂ NPs) as the first signal enhancers was fabricated. Due to chitosan with excellent pore forming capacity, these nanoparticles possess porous structures and better photopermeability, and therefore have higher luminescence efficiencies compared with Ru(bpy)₃ ²⁺ /SiO₂ NPs reported in previous publications. Conversely, chitosan with good biocompatibility and high hydrophilicity was electrochemically decorated onto a Nafion/multiwall carbon nanotubes (Nafion/MWNTs) modified electrode surface and used as the second sensitizing matrix to seize large amounts of prostate specific capture antibody (Ab₁ ). The chitosan-decorated Nafion/MWNTs composites exhibited a 5.5-times higher ECL intensity than the unadorned Nafion/MWNTs films. Also, without additional reagents, such as (3-aminopropyl)triethoxysilane (APTS), the one-step functionalized Ru(bpy)₃ ²⁺ /chitosan/SiO₂ NPs provided a large number of active arms to connect with PSA-detected antibodies (Ab₂ ) through the amino groups in chitosan. After a sandwich immunoreaction, the PSA antigen and Ru(bpy)₃ ²⁺ /chitosan/SiO₂ NPs-labelled Ab₂ were sequentially captured onto the Ab₁ /chitosan/Nafion/MWNTs-modified electrode surface. The ECL signal increases were linearly related to the PSA antigen concentrations and ranged from 0.01 pg·mLl^-1 to 10.0 pg·mLl^-1 . Under the optimized experimental conditions, the immunosensor displayed excellent sensitivity and selectivity. The detection limit was as low as 3.4 fg·mLl^-1 , equivalent to, or better than, those of the reported ECL immunosensors for PSA.

Enhanced electrochemiluminescence of CdS quantum dots capped with mercaptopropionic acid activated by EDC for Zika virus detection

Enhanced electrochemiluminescence (ECL) signals of CdS quantum dots capped with 3-mercaptopropionic acid (MPA@CdS QDs) have been observed after using N-(3-dimethylaminopropyl)-N'-ethylcarbodiimide (EDC) to activate the carboxyl groups. The generated ECL signals are strong enough that their images can be captured using a Huawei mobile phone. A possible mechanism for the generation of enhanced ECL signals has been proposed. Then, a sandwich immunosensor platform for detecting Zika virus (ZIKV) was fabricated with silica microspheres as the carrier and MPA@CdS QDs as ECL signal labels. Due to the dual signal amplification of EDC activation and microsphere enrichment, good linearity from 1.0 fg mL-1 to 1.0 ng mL-1 was exhibited by the QD-based ECL immunosensor for ZIKV detection. The detection limit was 0.3 fg mL-1.

Magnetic-Assisted Methylene Blue-Intercalated Amplified dsDNA for Polarity-Switching-Mode Photoelectrochemical Aptasensing

Organic dyes are typically applied as photosensitizers in photoelectrochemical (PEC) cells but have not been reported in polarity-reversal-mode PEC sensors with excellent sensitivity and accuracy. Herein, an elegant and robust PEC biosensor for carcinoembryonic antigen (CEA) has been designed by photocurrent polarity switching of CdTe quantum dots (QDs), which is obtained by embedding methylene blue (MB) into amplified double-stranded DNA (dsDNA) anchored to the superparamagnetic Fe₃O₄@SiO₂. The target-triggered Exo III-assisted cyclic amplification strategy and in situ magnetic enrichment enable the remarkable sensitivity. The extraction of target-analogue single-stranded DNA (output DNA) contributes to high selectivity resulting from the elimination of possible interferences in real samples or matrixes. Particularly, this exclusive polarity-reversal-mode PEC aptasensing can efficiently eliminate the false-positive or false-negative signals, leading to accurate measurements. Moreover, different from the probes and layer-by-layer assembled photoelectric beacons on electrodes in advance, this rational split-type approach is doomed to help the PEC biosensor with additional merits of convenient fabrication, short time consumption, wider linearity, as well as outstanding reproducibility and stability in practical applications. In light of the ability of MB acting as a kind of signal probe in typical electrochemical sensors, certainly, this ingenious design can not only be extended to a wide variety of target monitoring but also provide new ideas for the construction of high-performance electrochemical and PEC biosensors.

Application of magnetic nanomaterials in electroanalytical methods: A review

Magnetic nanomaterials (MNMs) have gained high attention in different fields of studies due to their ferromagnetic/superparamagnetic properties and their low toxicity and high biocompatibility. MNMs contain magnetic elements such as iron and nickel in metallic, bimetallic, metal oxide, and mixed metal oxide. In electroanalytical methods, MNMs have been applied as sorbents for sample preparation before the electrochemical detection (sorbent role), as the electrode modifier (catalytic role), and the integration of the above two roles (as both sorbent and catalytic agent). In this paper, the application of MNMs in electroanalytical methods have been classified based on the main role of the nanomaterial and discussed separately. Furthermore, catalytic activities of MNMs in electroanalytical methods such as redox electrocatalytic, nanozymes catalytic (peroxidase, catalase activity, oxidase activity, superoxide dismutase activity), catalyst gate, and nanocontainer have been discussed.

Design of Functional Magnetic Nanocomposites for Bioseparation

Magnetic materials have been widely used in bioseparation in recent years due to their good biocompatibility, magnetic properties, and high binding capacity. In this review, we provide a brief introduction on the preparation and bioseparation applications of magnetic materials including the synthesis and surface modification of magnetic nanoparticles as well as the preparation and applications of magnetic nanocomposites in the separation of proteins, peptides, cells, exosomes and blood. The current limitations and remaining challenges in the fabrication process of magnetic materials for bioseparation will be also detailed.

Development of an Immunosensor Based on the Exothermic Reaction between H2O and CaO Using a Common Thermometer as Readout

Thermometers, one of the most commonly used instruments at home, are normally adapted to measure temperature directly with high accuracy but rarely adopted to act as readout in the biosensors. It is necessary to find some ways to establish a relationship between the concentration of the target and the temperature change. In this study, a common thermometer was used as readout to develop a convenient immunosensor. The designed immunosensor comprises three components, including target recognition area, water flow system, and exothermic reaction bottle. The capture antibody for the target [carcinoembryonic antigen (CEA) was selected as a model target] was preloaded on the bottom of the recognition area. In the presence of CEA, a sandwich-type structure was formed between the capture antibody, CEA, and biotinylated detection antibody. Then, the streptavidin-functionalized platinum nanoparticles were labeled on the detection antibody due to biotin-avidin interaction. The captured platinum nanoparticles can effectively catalyze the decomposition of H₂O₂ into O₂. The continuous production of gas resulted in pressure increment inside the reaction bottle and further pushed the water flow into the exothermic reaction bottle. Finally, the water reacted with calcium oxide to generate a large amount of heat in the exothermic reaction bottle; thereby the temperature inside the bottle was enhanced and recorded by a common thermometer easily. The temperature enhancement has a linear relationship with the CEA concentration in the range of 7.81-500 pg/mL with a detection limit of 0.6 pg/mL. Furthermore, by taking advantage of simplicity, compatibility, stability, and high sensitivity, our temperature-based immunoassay has been applied to detect CEA in human serum samples with satisfactory results.

A highly sensitive electrochemical immunosensor for hepatitis B virus surface antigen detection based on Hemin/G-quadruplex horseradish peroxidase-mimicking DNAzyme-signal amplification

Here we prepared an electrochemical immunosensor employing Au sheet as working electrode, Fe₃O₄ magnetic nanoparticles (MNPs) as supporting matrix and hemin/G-quadruplex DNAzyme as signal amplifier for determination of hepatitis B virus surface antigen (HBsAg). First, the primary antibody of HBs (Ab₁) was immobilized on the surface of the carboxyl-modified MNPs. Then, the assembly of antibody and alkylthiol/G-quadruplex DNA/hemin on gold nanoparticles was used as bio-bar-coded nanoparticle probe. Protein target was sandwiched between the primary antibody of HBs (Ab₁) immobilized on the MNPs and hemin bio-bar-coded AuNPs probe labeled antibody (Ab₂). Hemin/G-quadruplex structure as HRP mimicking-DNAzyme significantly improved the catalytic reduction of H₂O₂ by oxidation of methylene blue (MB). Square wave voltammetry signals of MB provided quantitative measurements of HBsAg with a linear concentration range of 0.3-1000 pgmL^-1 and detection limit of 0.19 pgmL^-1. Due to efficient catalytic activity of HRP mimicking-DNAzyme, the proposed immunosensor exhibited high sensitivity and it holds great promise for clinical application and provides a new platform for immunosensor development and fast disease diagnosis.

Sensitive detection of cardiac troponin T based on superparamagnetic bead-labels using a flexible micro-fluxgate sensor

In this study, we describe an innovative micro-fluxgate immunosensor based on superparamagnetic Dynabeads for the detection of cardiac troponin T (cTnT), an important biomarker for cardiovascular diseases.

Self-electrochemiluminescence of CdTe nanocrystals capped with 2-diethylaminoethanethiol

The self-electrochemiluminescence of CdTe nanocrystals capped with 2-diethylaminoethanethiol was achieved via protective reagent exchange.