An Ultrasensitive Plasmonic Nanosensor for Aldehydes

Time-domain Tollens reaction: synthesising silver nanoparticles with the formaldehyde clock

The addition of silver(i) ions to the methylene glycol-sulphite (MGS) clock reaction results in the sudden formation of metallic silver nanoparticles. Stable suspensions are obtained in the presence of poly(vinylpyrrolidone). The time delay before the appearance of the particles, as well as their size, decreases with the initial methylene glycol concentration while their monodispersity increases.

Detection of monoamine oxidase B using dark-field light scattering imaging and colorimetry

Detection of MAO-B using dark-field light scattering imaging and colorimetry based on localized surface plasmon resonance induced by silver deposited gold nanostars.

Detection of aldehydes by gold nanoparticle colorimetric array based on Tollens' reagent

Aldehydes are very common pollutants and many are possible human carcinogens. Herein, we report an easy-to-operate and low-cost method for discrimination of diverse aldehydes. Our colorimetric sensor array based on Tollens' reagent allows discrimination of ten kinds of aldehydes, showing a distinct color change from wine-red to deep yellow. In the presence of aldehydes, Ag shells are coated onto gold nanoparticles (GNPs) functionalized with diverse ligands (including bovine serum albumin, polyvinylpyrrolidone and L-cysteine), forming Au@Ag core-shell nanoparticles. The sensor array has great capacity for differentiating between ten kinds of aldehydes by color change, with accuracy and specificity of over 88%. Under optimal conditions, there is good linear correlation between Euclidean distance and formaldehyde concentrations ranging from 0.1 to 10 000 μM (R² = 0.9908). The sensor was successfully used to determine formaldehyde content in shrimp, with recovery of 85.8% to 114.82%. Our GNPs sensor shows good potential for fast, reliable identification of aldehydes in food.

Poly(L-DOPA)-mediated bimetallic core-shell nanostructures of gold and silver and their employment in SERS, catalytic activity, and cell viability

Core-shell gold nanorod (AuNR)@silver (Ag) nanostructures with their unique properties have gained enormous interest and are widely utilized in various applications including sensor systems, catalytic reactions, diagnosis, and therapy. Despite the recent progress, simple, effective, low-cost, and easy-to-tune strategies are heavily required to fabricate these nanoparticles (NP) systems. For this, we propose the employment of the polymer of 3,4-dihydroxyphenyl-L-alanine (L-DOPA) as a ligand molecule. A conformal thin layer of polymer of L-DOPA (PLDOPA) with its various functional groups enabled the reduction of silver ions onto the AuNRs and stabilization of the resultant NPs without using any surfactant, reducing agent, and seed material. The shape and growth model of the AuNR@Ag nanostructures was manipulated by simply tuning the amount of silver ions. This procedure created different NP morphologies ranging from concentric to acentric/island shape core-shell nanostructures. Also, even at the highest Ag deposition, the PLDOPA layer is still conformally present onto the Au@Ag core-shell NRs. The unique properties of NP systems provided remarkable characteristics in surface-enhanced Raman spectroscopy, catalytic activity, and cell viability tests.

Plasmon-Induced Photoreduction System Allows Ultrasensitive Detection of Disease Biomarkers by Silver-Mediated Immunoassay

Current strategies for the detection of disease biomarkers often require enzymatic assays that may have limited sensitivity due to inferior stability and vulnerable catalytic activity of the enzyme. A new enzyme-free amplification method for identifying suitable biomarkers is necessary to lower the limit of detection and improve many critical diagnosis applications. Here, we presented an enzyme-free amplified plasmonic immunoassay that enhanced the detection sensitivity of disease biomarkers by combining a novel plasmon-induced silver photoreduction system with a silver nanoparticle (AgNP)-linked immunoassay. The key step to achieving ultrasensitivity was to use Ag⁺ from dissolved AgNPs that control the growth rate of the silver coating on plasmonic nanosensors under visible light illumination. We demonstrated the outstanding sensitivity and robustness of this assay by detecting the disease biomarker alpha-fetoprotein (AFP) at a low concentration of 3.3 fg mL^-1. The detection of AFP was further confirmed in the sera of hepatocellular carcinoma patients.

Asymmetrical Molecular Decoration of Gold Nanorods for Engineering of Shape-Controlled AuNR@Ag Core-Shell Nanostructures

Gold-silver (Au@Ag) core-shell nanostructures have a stronger surface plasma response, wider absorption and scattering in the UV-vis-NIR region, and distinctive optical properties, which are widely explored in biosensors, information processing, photothermal therapy, and catalysis. Core-shell nanostructures are usually formed by the deposition of the second metal atoms onto the first core metal particles via the chemical wet method. The conventional approaches for the manipulation of the shape usually were done by homogeneous growth or etching of isotropic nanoparticles. Through in situ modification of the first metal core at the different locations, the different growth model of the second metal can be regulated to control the shapes of core-shell structures. Herein, we modified the gold nanorods (AuNRs) asymmetrically at the end and side parts using thiolated molecules to regulate the morphology of gold nanorod@silver (AuNR@Ag) core-shell nanoparticles. Interestingly, the obvious eccentric nanostructures of AuNR@Ag core-shell nanoparticles were obtained with the increase of the molecular weight of macromolecules modified at the end of AuNRs. Therefore the growth mode was adjusted from Frank-van der Merwe mode to Stranski-Krastanow mode. By changing the length of the hydrocarbon chain and functional groups of the small mercaptan molecules at the side of AuNRs, the silver shell exhibits selective growth at the side of the AuNRs, resulting in heterogeneous core-shell nanoparticles and various shapes of the AuNR@Ag core-shell. Our method opens up a new avenue toward preparing core-shell nanostructures with controlled shapes, and the obtained structures are promising in various applications.

Tunable optical metamaterial-based sensors enabled by closed bipolar electrochemistry

Enabled by the proliferation of nanoscale fabrication techniques required to create spatially-repeating, sub-wavelength structures to manipulate the behavior of visible-wavelength radiation, optical metamaterials are of increasing interest. Here we develop and characterize a chemical sensing approach based on electrochemical tuning of the optical response function of large-area, inexpensive nanoaperture metamaterials at visible and near-IR wavelengths. Nanosphere lithography is used to create an ordered array of sub-wavelength apertures in a Au film. The spacing of these apertures is established during fabrication, based on the size of the polystyrene nanospheres. Tunable shifts in the transmission spectrum can be produced post-fabrication by electrodeposition of a dissimilar metal, Ag, using the nanoaperture film as one electrode in a 2-electrode closed bipolar electrochemical (CBE) cell, altering hole size, film thickness, and film composition while maintaining hole spacing dictated by the original pattern. Optical transmission spectra acquired under galvanostatic conditions can be expressed as a linear combination of the initial and final (saturated) spectra, and the resulting response function exhibits a sigmoidal response with respect to the amount of charge (or metal) deposited. This architecture is then used to perform optical coulometry of model analytes in a CBE-based analyte-reporter dual cell device, thus expanding the capability of CBE-based sensors. Increasing the exposed electrode area of the analyte cell increases the response of the device, while modifying the circuit resistance alters the balance between sensitivity and dynamic range. These tunable nanoaperture metamaterials exhibit enhanced sensitivity compared to CBE electrochromic reporter cells to the μM to nM concentration range, suggesting further avenues for development of CBE-based chemical sensors as well as application to inexpensive, point-of-care diagnostic devices.

New application of old methods: Development of colorimetric sensor array based on Tollen's reagent for the discrimination of aldehydes based on Tollen's reagent

Qualitative and quantitative testing of aldehydes is meaningful for chemical toxin detection, food inspection, and disease monitoring. Herein, we reported a simple, accurate, and selective Tollen's reagent-based colorimetric sensor array for determination and detection of aldehydes. Three kinds of negatively charged gold nanoparticles (Au NPs) with different sizes (13, 22, and 40 nm) were synthesized and characterized by transmission electron microscopy and zeta potential measurement. In the presence of aldehydes, Ag+ from Tollen's reagent was attracted by the negative charge on the surface of Au NPs. Ag+ was reduced into Ag0 in situ, forming Au@Ag core-shell nanostructure and resulting in a significant color change. Detailed morphological and dimensional changes were observed by transmission electron microscopy. ΔRGB values (the value changes in the red, green, and blue color model) of Au NPs were captured as the optical signal for further data processing. Results of pattern recognition indicated the outstanding discrimination performance of the system for identification of aldehydes. Moreover, the array possessed quantitative detection capability for formaldehyde, selectivity, and reproducibility and thus has great potential in practical detection.

Noble Metal Nanoparticle-Based Multicolor Immunoassays: An Approach toward Visual Quantification of the Analytes with the Naked Eye

Noble metal nanoparticle-based colorimetric sensors have become powerful tools for the detection of different targets with convenient readout. Among the many types of nanomaterials, noble metal nanoparticles exhibit extraordinary optical responses mainly due to their excellent localized surface plasmon resonance (LSPR) properties. The absorption spectrum of the noble metal nanoparticles was mostly in the visible range. This property enables the visual detection of various analytes with the naked eye. Among numerous color change modes, the way that different concentrations of targets represent vivid color changes has been brought to the forefront because the color distinction capability of normal human eyes is usually better than the intensity change capability. We review the state of the art in noble metal nanoparticle-based multicolor colorimetric strategies adopted for visual quantification by the naked eye. These multicolor strategies based on different means of morphology transformation are classified into two categories, namely, the etching of nanoparticles and the growth of nanoparticles. We highlight recent progress on the different means by which biocatalytic reactions mediated LSPR modulation signal generation and their applications in the construction of multicolor immunoassays. We also discuss the current challenges associated with multicolor colorimetric sensors during actual sample detection and propose the future development of next-generation multicolor qualification strategies.

A dual functional MOF-based fluorescent sensor for intracellular phosphate and extracellular 4-nitrobenzaldehyde

A hydrazine-functionalized Zr(iv) MOF was used for the selective and sensitive detection of intracellular PO₄³⁻ ions and extracellular 4-nitrobenzaldehyde.

Electrochromic Sensor for Multiplex Detection of Metabolites Enabled by Closed Bipolar Electrode Coupling

Biosensors based on converting electrochemical signals into optical readouts are attractive candidates as low-cost, high-throughput sensor platforms. Here, we described a closed bipolar electrode (CBE)-based two-cell electrochromic device for sensing multiple metabolites, using the simultaneous detection of lactate, glucose, and uric acid as a model system. In the two-cell configuration, an analytical cell contains a redox mediator combined with a specific oxidase, e.g., lactate oxidase, glucose oxidase, or uricase, to form an electrochemical mediator-electrocatalyst pair that supports redox cycling. A closed bipolar electrode couples the electron transfer event in the analytical cell to an electrochromic reaction in a separate reporter cell, such that the magnitude of the color change is related to the concentration of metabolites in the analytical cell. To demonstrate multiplex operation, the CBE-based electrochromic detector is modified by integrating three sets of detection chemistries into a single device, in which simultaneous determination of glucose, lactate, and uric acid is demonstrated. Device sensitivity can be tuned by using reporter cells with different volumes. Furthermore, the analytical cell of this device can be fabricated as a disposable, paper-based carbon electrode without any pretreatment, demonstrating the potential to screen phenotypes that require multiple biomarkers in a point-of-care format.