Resistive and Capacitive γ-Ray Dosimeters Based On Triggered Depolymerization in Carbon Nanotube Composites

Polyethyleneimine-Starch Functionalization of Single-Walled Carbon Nanotubes for Carbon Dioxide Sensing at Room Temperature

There is an ever-growing interest in the detection of carbon dioxide (CO2) due to health risks associated with CO2 emissions. Hence, there is a need for low-power and low-cost CO2 sensors for efficient monitoring and sensing of CO2 analyte molecules in the environment. This study reports on the synthesis of single-walled carbon nanotubes (SWCNTs) that are functionalized using polyethyleneimine and starch (PEI-starch) in order to fabricate a PEI-starch functionalized SWCNT sensor for reversible CO2 detection under ambient room conditions (T = 25 °C; RH = 53%). Field-emission scanning electron microscopy, high-resolution transmission electron microscopy, Raman spectroscopy, and Fourier transform infrared spectroscopy are used to analyze the physiochemical properties of the as-synthesized gas sensor. Due to the large specific surface area of SWCNTs and the efficient CO2 capturing capabilities of the amine-rich PEI layer, the sensor possesses a high CO2 adsorption capacity. When exposed to varying CO2 concentrations between 50 and 500 ppm, the sensor response exhibits a linear relationship with an increase in analyte concentration, allowing it to operate reliably throughout a broad range of CO2 concentrations. The sensing mechanism of the PEI-starch-functionalized SWCNT sensor is based on the reversible acid-base equilibrium chemical reactions between amino groups of PEI and adsorbed CO2 molecules, which produce carbamates and bicarbonates. Due to the presence of hygroscopic starch that attracts more water molecules to the surface of SWCNTs, the adsorption capacity of CO2 gas molecules is enhanced. After multiple cycles of analyte exposure, the sensor recovers to its initial resistance level via a UV-assisted recovery approach. In addition, the sensor exhibits great stability and reliability in multiple analyte gas exposures as well as excellent selectivity to carbon dioxide over other interfering gases such as carbon monoxide, oxygen, and ammonia, thereby showing the potential to monitor CO2 levels in various infrastructure.

Computational prediction of electrical percolation threshold in polymer/graphene-based nanocomposites with finite element method

In this research work, a two-dimensional model to predict the electrical percolation threshold (EPT) of the polymer/graphene-based nanocomposites in different concentrations of the randomly dispersed inclusions in various polymer matrices is introduced using the finite element method (FEM). The predicted EPT values were validated by other experimental results for different nanocomposites. Results showed that the electrical conductivity of different nanocomposites is significantly related to the percentage weight of the reinforcing phase in the polymer matrix. Furthermore, the addition of graphene-based nano-fillers in the polymer matrix caused a decrease in the tunneling distance in nanocomposites.

Computational prediction of electrical percolation threshold in polymer/graphene-based nanocomposites with finite element method

In this research work, a two-dimensional model to predict the electrical percolation threshold (EPT) of the polymer/graphene-based nanocomposites in different concentrations of the randomly dispersed inclusions in various polymer matrices is introduced using the finite element method (FEM). The predicted EPT values were validated by other experimental results for different nanocomposites. Results showed that the electrical conductivity of different nanocomposites is significantly related to the percentage weight of the reinforcing phase in the polymer matrix. Furthermore, the addition of graphene-based nano-fillers in the polymer matrix caused a decrease in the tunneling distance in nanocomposites.

Synthesis and characterization of novel poly(sulfone siloxane)s with good solubility and recyclability based on siloxane units

A controllable circulation between poly(sulfone siloxane)s (PSS) and sulfone-containing cyclosiloxane monomers (SCS) was acheived in the presence of KHSO4.

Self-Immolative Polymers: An Emerging Class of Degradable Materials with Distinct Disassembly Profiles

Self-immolative polymers are an emerging class of macromolecules with distinct disassembly profiles that set them apart from other general degradable materials. These polymers are programmed to disassemble spontaneously from head to tail, through a domino-like fragmentation, upon response to extremal stimuli. In the time since we first reported this unique type of molecule, several groups around the world have developed new, creative molecular structures that perform analogously to our pioneering polymers. Self-immolative polymers are now widely recognized as an important class of stimuli-responsive materials for a wide range of applications such as signal amplification, biosensing, drug delivery, and materials science. The quinone-methide elimination was shown to be an effective tool to achieve rapid domino-like fragmentation of polymeric molecules. Thus, numerous applications of self-immolative polymers are based on this disassembly chemistry. Although several other fragmentation reactions achieved the function requested for sequential disassembly, we predominantly focused in this Perspective on examples of self-immolative polymers that disassemble through the quinone-methide elimination. Selected examples of self-immolative polymers that disassembled through other chemistries are briefly described. The growing demand for stimuli-responsive degradable materials with novel molecular backbones and enhanced properties guarantees the future interest of the scientific community in this unique class of polymers.

Radiation-Responsive Amino Acid Nanosensor Gel (RANG) for Radiotherapy Monitoring and Trauma Care

Accurate detection of doses is critical for the development of effective countermeasures and patient stratification strategies in cases of accidental exposure to ionizing radiation. Existing detection devices are limited by high fabrication costs, long processing times, need for sophisticated detection systems, and/or loss of readout signal over time, particularly in complex environments. Here, we describe fundamental studies on amino acid-facilitated templating of gold nanoparticles following exposure to ionizing radiation as a new colorimetric approach for radiation detection. Tryptophan demonstrated spontaneous nanoparticle formation, and parallel screening of a library of amino acids and related compounds led to the identification of lead candidates, including phenylalanine, which demonstrated an increase in absorbance at wavelengths typical of gold nanoparticles in the presence of ionizing radiation (X-rays). Evaluation of screening, i.e., absorbance data, in concert with chemical informatics modeling led to the elucidation of physicochemical properties, particularly polarizable regions and partial charges, that governed nanoparticle formation propensities upon exposure of amino acids to ionizing radiation. NMR spectroscopy revealed key roles of amino and carboxy moieties in determining the nanoparticle formation propensity of phenylalanine, a lead amino acid from the screen. These findings were employed for fabricating radiation-responsive amino acid nanosensor gels (RANGs) based on phenylalanine and tryptophan, and efficacy of RANGs was demonstrated for predicting clinical doses of ionizing radiation in anthropomorphic thorax phantoms and in live canine patients undergoing radiotherapy. The use of biocompatible templating ligands (amino acids), rapid response, simplicity of fabrication, efficacy, ease of operation and detection, and long-lasting readout indicate several advantages of the RANG over existing detection systems for monitoring radiation in clinical radiotherapy, radiological emergencies, and trauma care.

Effect of 150 MeV protons on carbon nanotubes for fabrication of a radiation detector

High energy and high flux protons are used in proton therapy and the impact of proton radiation is a major reliability concern for electronics and solar cells in low earth orbit as well as in the trapped belts. Carbon nanotubes (CNTs), due to their unique characteristics, have been considered for the construction of proton and other radiation sensors. Here, a single wall CNT based proton sensor was fabricated on FR4 substrate and its response to 150 MeV proton irradiation was studied. The change in the resistance of the nanotubes upon irradiation is exploited as the sensing mechanism and the sensor shows good sensitivity to proton radiation. Proton radiation induces dissociation of ambient oxygen, followed by the adsorption of oxygen species on the nanotube surface, which influences its electrical characteristics. Since the nanotube film is thin and the 150 MeV protons are expected to penetrate into and interact with the substrate, control experiments were conducted to study the impact on FR4 substrate without the nanotubes. The dielectric loss tangent or dissipation factor of FR4 increases after irradiation due to an increase in the cross-linking of the resin arising from the degradation of the polymer network.

Quantifiable Polymeric Fluorescent Ratiometric γ-ray Chemosensor

Detection of γ-rays is of vital significance in various areas such as high-energy physics, nuclear medicine, national security, and space exploration. However, many current spectrometry methods are based on ionization effects, which are limited to electron counting and related techniques such as ionization-induced luminescence. Herein, we report an alternative, quantifiable γ-ray chemosensor based on a secondary effect from this ionizing radiation, that is, it was discovered that poly(methyl methacrylate) (PMMA) and polyvinyl chloride (PVC) are more sensitive to a γ-ray-induced acid generation process by surveying a series of commercially available polymers. Accordingly, a pH-sensitive fluorescent quinoline derivative is designed and embedded in PMMA or PVC films, which exhibits dramatic emission shift from blue (λ_em = 460-480 nm) to red (λ_em = 570-620 nm) upon exposure to γ-irradiation. A linear response of ratiometric fluorescence intensity (I_red/I_blue) to γ-ray dosage in a wide range (80-4060 Gy) was established, which can be used as a practical visual dosimeter complementary to current techniques.

Pentiptycene Polymer/Single-Walled Carbon Nanotube Complexes: Applications in Benzene, Toluene, and o-Xylene Detection

We report the dispersion of single-walled carbon nanotubes (SWCNTs) using pentiptycene polymers and their use in chemiresistance-based and QCM-D sensors. Poly(p-phenylene ethynylene)s (PPEs) incorporating pentiptycene moieties present a concave surface that promotes π-π interactions and van der Waals interactions with SWCNTs. In contrast to more common polymer-dispersing mechanisms that involve the wrapping of polymers around the SWCNTs, we conclude that the H-shape of pentiptycene groups and the linear rigid-rod structure creates a slot for nanotube binding. UV-vis-NIR, Raman, and fluorescence spectra and TEM images of polymer/SWCNTs support this dispersion model, which shows size selectivity to SWCNTs with diameters of 0.8-0.9 nm. Steric bulk on the channels is problematic, and tert-butylated pentiptycenes do not form stable dispersions with SWCNTs. This result, along with the diameter preference, supports the model in which the SWCNTs are bound to the concave clefts of the pentiptycenes. The binding model suggests that the polymer/SWCNTs complex creates galleries, and we have demonstrated the binding of benzene, toluene, and o-xylene (BTX) vapors as the basis for a robust, sensitive, and selective sensing platform for BTX detection. The utility of our sensors is demonstrated by the detection of benzene at the OSHA short-term exposure limit of 5 ppm in air.

Plasmonic gel nanocomposites for detection of high energy electrons

Radiation therapy is a common treatment modality employed in the treatment of cancer. High energy photons are the primary source of radiation but when administered, they leave an exit dose resulting in radiation damage to the adjacent healthy tissues. To overcome this, high energy electrons are employed in cases of skin cancer to minimize radiation induced toxicity. Despite these advances, measurement of delivered radiation remains a challenge due to limitations with existing dosimeters including labor intensive fabrication, complex read-out techniques and post-irradiation instability. To overcome these limitations, we have developed a novel colorimetric plasmonic gel nanocomposite for the detection of therapeutic levels of radiation delivered in electron beam therapy. The plasmonic nanocomposite consists of an agarose gel matrix encapsulating precursor gold ions, which are reduced to gold nanoparticles as a result of exposure to high energy electrons. The formation of gold nanoparticles renders a change in color to the agarose matrix, resulting in the formation of plasmonic gel nanocomposites. The intensity of the color formed exhibits a linear relation with the delivered electron dose, which can be quantified using absorbance spectroscopy. The plasmonic gel nanocomposites were able to detect doses employed in fractionated electron therapy, including in an anthropomorphic phantom used for planning radiation treatments in the clinic. Furthermore, the use of glutathione as a quenching agent facilitated qualitative and quantitative spatial mapping of the delivered dose. Our results indicate that the ease of fabrication, simplicity of detection and quantification using absorbance spectroscopy, determination of spatial dose profiles, and relatively low cost make the plasmonic gel nanocomposite technology attractive for detecting electron doses in the clinic.

Protein-facilitated gold nanoparticle formation as indicators of ionizing radiation

The use of X-ray radiation in radiotherapy is a common treatment for many cancers. Despite several scientific advances, determination of radiation delivered to the patient remains a challenge due to the inherent limitations of existing dosimeters including fabrication and operation. Here, we describe a colorimetric nanosensor that exhibits unique changes in color as a function of therapeutically relevant radiation dose (3-15 Gy). The nanosensor is formulated using a gold salt and maltose-binding protein as a templating agent, which upon exposure to ionizing radiation is converted to gold nanoparticles. The formation of gold nanoparticles from colorless precursor salts renders a change in color that can be observed visually. The dose-dependent multicolored response was quantified through a simple ultraviolet-visible spectrophotometer and the peak shift associated with the different colored dispersions was used as a quantitative indicator of therapeutically relevant radiation doses. The ease of fabrication, visual color changes upon exposure to ionizing radiation, and quantitative read-out demonstrates the potential of protein-facilitated biomineralization approaches to promote the development of next-generation detectors for ionizing radiation.

Carbon Nanotube Based γ Ray Detector

A single walled carbon nanotube (SWCNT) based γ ray detector is demonstrated without a conventional scintillation mechanism. The change in the conductance of a two terminal SWCNT resistor in response to γ ray exposure is exploited as a sensing mechanism. Radiation-induced ambient oxygen dissociation and subsequent adsorption of oxygen species on the SWCNT surface alter its electrical properties. The responses to the total dose and dose rate are investigated along with the sensing mechanism. The detector showed good sensitivity to γ ray and a capability to distinguish radiation dose rates ranging from 2.4 to 16.4 R/min.

Carbon Nanotube Chemical Sensors

Carbon nanotubes (CNTs) promise to advance a number of real-world technologies. Of these applications, they are particularly attractive for uses in chemical sensors for environmental and health monitoring. However, chemical sensors based on CNTs are often lacking in selectivity, and the elucidation of their sensing mechanisms remains challenging. This review is a comprehensive description of the parameters that give rise to the sensing capabilities of CNT-based sensors and the application of CNT-based devices in chemical sensing. This review begins with the discussion of the sensing mechanisms in CNT-based devices, the chemical methods of CNT functionalization, architectures of sensors, performance parameters, and theoretical models used to describe CNT sensors. It then discusses the expansive applications of CNT-based sensors to multiple areas including environmental monitoring, food and agriculture applications, biological sensors, and national security. The discussion of each analyte focuses on the strategies used to impart selectivity and the molecular interactions between the selector and the analyte. Finally, the review concludes with a brief outlook over future developments in the field of chemical sensors and their prospects for commercialization.

Switchable Single-Walled Carbon Nanotube-Polymer Composites for CO2 Sensing

We report a chemiresistive CO₂ sensor based on single-walled carbon nanotubes (SWCNTs) noncovalently functionalized with a CO₂ switchable copolymer containing amidine pendant groups that transform into amidinium bicarbonates in response to CO₂. To fabricate a robust surface-anchored polymer-SWCNT dispersion via spray coating, we first designed and synthesized a precursor copolymer, P(4VP-VBAz), bearing both 4-vinylpyridine (4VP) groups and azide groups. The SWCNT dispersant group, 4VP, is capable of debundling and stabilizing nanotubes to improve their solubility in organic solvents for solution processing. Well-dispersed P(4VP-VBAz)-SWCNT composites are covalently immobilized onto a glass substrate functionalized with alkyl bromides, and then the amidine moieties are subsequently attached to form the resulting CO₂-switchable P(Q4VP-VBAm)-SWCNT composites via a copper(I)-catalyzed azide-alkyne cycloaddition click reaction at the film surface. The amidine groups are strong donors that compensate or pin carriers in the SWCNTs. In the presence of CO₂ under humid conditions, the generated amidinium bicarbonates from the polymer wrapping increase the concentration and/or liberate the hole carriers in the nanotubes, thereby increasing the net conductance of the composites. The amidinium moieties revert back to the amidines when purged with a CO₂-free carrier gas with a reversible decrease in conductance. We also demonstrate high selectivity to CO₂ over the other atmospheric gases such as O₂ and Ar.