Sensitivity-Tunable Colorimetric Detection of Chloropicrin Vapor on Nylon-6 Nanofibrous Membrane Based on a Detoxification Reaction with Biological Thiols

Chloropicrin induced ocular injury: Biomarkers, potential mechanisms, and treatments

Ocular tissue, especially the cornea, is overly sensitive to chemical exposures. The availability and adoption of chemical threat agent chloropicrin (CP) is growing in the United States as a pesticide and fumigant; thereby increasing the risk of its use in warfare, terrorist attacks and non-intentional exposure. Exposure to CP results in immediate ocular, respiratory, and dermal injury; however, we lack knowledge on its mechanism of toxicity as well as of its breakdown products like chlorine and phosgene, and effective therapies are elusive. Herein, we have reviewed the recent findings on exposure route, toxicity and likely mechanisms of CP induced ocular toxicity based on other vesicating chemical warfare agents that cause ocular injury. We have focused on the implication of their toxicity and mechanistic outcomes in the ocular tissue, especially the cornea, which could be useful in the development of broad-spectrum effective therapeutic options. We have discussed on the potential countermeasures, overall hallmarks and challenges involved in studying ocular injuries from chemical threat agent exposures. Finally, we reviewed useful available technologies and methods that can assist in the identification of effective medical countermeasures for chemical threat agents related ocular injuries.

Self-Amplified Cascade Degradation and Oxidative Stress Via Rational pH Regulation of Oxidation-Responsive Poly(ferrocene) Aggregates

Precise activation of polymer nanoparticles at lesion sites is crucial to achieve favorable therapeutic efficacy. However, conventional endogenous stimuli-responsive polymer nanoparticles probably suffer from few triggers to stimulate the polymer degradation and subsequent functions. Here, we describe oxidation-responsive poly(ferrocene) amphiphiles containing phenylboronic acid ester and ferrocene as the repeating backbone units. Upon triggering by hydrogen peroxide inside the tumor cells, the phenylboronic acid ester bonds are broken and poly(ferrocene) units are degraded to afford free ferrocene and noticeable hydroxide ions. The released hydroxide ions can immediately improve the pH value within the poly(ferrocene) aggregates, and the degradation rate of the phenylboronic acid ester backbone is further promoted by the upregulated pH; thereupon, the accelerated degradation can release much more additional hydroxide ions to improve the pH, thus achieving a positive self-amplified cascade degradation of poly(ferrocene) aggregates accompanied by oxidative stress boosting and efficient cargo release. Specifically, the poly(ferrocene) aggregates can be degraded up to ∼90% within 12 h when triggered by H2O2, while ferrocene-free control nanoparticles are degraded by only 30% within 12 days. In addition, the maleimide moieties tethered in the hydrophilic corona can capture blood albumin to form an albumin-rich protein corona and significantly improve favorable tumor accumulation. The current oxidation-responsive poly(ferrocene) amphiphiles can efficiently inhibit tumors in vitro and in vivo. This work provides a proof-of-concept paradigm for self-amplified polymer degradation and concurrent oxidative stress, which is promising in actively regulated precision medicine.

The BODIPY-based chemosensor for the fluorometric determination of organochlorine pesticide dicofol

Dicofol is an organochlorine pesticide, which is widely used in fruits, tea and other crops, and is moderately toxic to humans. Therefore, the monitoring of organochlorine pesticide-dicofol is critical for food safety. In this work, a fluorometric chemosensor based on mercaptoethanol and boron dipyrromethene (BODIPY) was first constructed to detect the dicofol. The chemosensor displayed turn-off fluorescence behavior upon dicofol with a detection limit of 200 ppb. The nucleophilicity of the glutathione and other biological thiols was studied to evaluate the reactivity of thiols with dicofol. In practical applications, an obvious color difference was observed on a paper based microfluidic device modified by phenyltriethoxysilane (PTES). We designed an integrated device for pretreatment and paper-based detection, and successfully used for the detection of dicofol in tea. The applicability was demonstrated by detection of dicofol in real tea samples with good recovery ranging from 86% to 109%. The apparatus was convenient and could be used for on-site evaluation of dicofol.

A Colorimetric Membrane-Based Sensor with Improved Selectivity towards Amphetamine

Due to their simplicity, speed and low cost, chemical spot tests are increasingly demanded for the presumptive identification of illicit drugs in a variety of contexts such as point-of-care assistance or prosecution of drug trafficking. However, most of the colorimetric reactions used in these tests are, at best, drug class selective. Therefore, the development of tests based on chemical reactions with improved discrimination power is of great interest. In this work, we propose a new colorimetric assay for amphetamine (AMP) based on its reaction with solutions of alkaline gold bromide to form an insoluble yellow–orange derivative. The resulting suspensions are then filtered onto nylon membranes and the precipitate collected is used for the visual identification of AMP. The measurement of the absorbance of the membranes by diffuse reflectance spectroscopy also allows the quantification of AMP in a simple and rapid way, as demonstrated for different synthetic and drug street samples. On the basis of the results obtained, it was concluded that the proposed procedure is highly selective towards AMP, as this compound could be easily differentiated from other common drugs such as methamphetamine (MET), ephedrine (EPH), scopolamine (SCP) and cocaine (COC).

Daylight-activated fumigant detoxifying nanofibrous membrane based on thiol-ene click chemistry

Daylight-activated detoxifying nanofibrous membranes (LDNMs) are fabricated by grafting benzophenone-3,3',4,4'-tetracarboxylic dianhydride (BD) and biological thiols successively on poly(vinyl alcohol-co-ethylene) (EVOH) nanofibrous membrane. Taking the merits of photoactivity of BD, high-reactivity of biological thiols, and high specific surface area and porosity of the nanofibrous membrane, 1,3-dichloropropene (1,3-D) can be efficiently detoxified on the LDNMs under daylight irradiation via a thiol-ene click reaction. The detoxification function of the LDNMs is "switched on" by light irradiation and continues by following a cascade of chemical attacks of thiyl radicals formed during the photoexcitation process. The resultant LDNMs present rapid detoxification rate (i.e., t1/2 =~30 min) and massive detoxification amount (i.e., ~12 mg/g) against 1,3-D vapor under ambient conditions. More importantly, the LDNMs perform a detoxification tailing effect after moving the light-irradiated membrane to a dark environment, thus ensuring the protective function in the absence of sufficient light sources. The detoxification property of the LDNMs in an outdoor environment with sunlight irradiation shows comparable results to the lab-scale outcomes, enabling them to serve as innovative materials for personal protective equipment in practical applications. The successful fabrication of LDNMs may inspire new insights into the design of protective materials providing aggressive protection.

Colorimetric Detection of Carcinogenic Alkylating Fumigants on a Nylon 6 Nanofibrous Membrane. Part II: Self-Catalysis of 2-Diethylaminoethyl-Modified Sensor Matrix for Improvement of Sensitivity

A nylon 6 nanofibrous membrane (N6NFM) was covalently modified with 2-diethylaminoethylchloride (DEAE-Cl) to provide self-catalytic functions to facilitate the formation of color compounds in reactions of 4-( p-nitrobenzyl)pyridine with alkylating fumigants. The 2-diethylaminoethyl group on the DEAE-Cl-modified N6NFM (DEAE@N6NFM) enables effective elimination of hydrohalogenic acids from intermediates that were formed from reactions between the alkylating fumigants and NBP and consequently improve their detection sensitivities, especially for 1,3-dichloropropene at room temperature. Moreover, DEAE@N6NFM can be recycled and reused multiple times without obvious loss in the sensing functions or any noticeable material damage. The naked-eye detection limits of the sensor to 1,3-dichloropropene, methyl iodide, and methyl bromide on DEAE@N6NFM are improved to 0.2, 0.1, and 0.1 ppm, respectively, which are much lower than their occupational exposure limits. The reaction mechanism is demonstrated through a computational method by analyzing the thermodynamics of the reaction. The modification of DEAE@N6NFM also provides an insight into the development of functionalized materials with improved reactivities for versatile sensing applications.

Bio-inspired ultrasensitive colorimetric detection of methyl isothiocyanate on nylon-6 nanofibrous membrane: A comparison of biological thiol reactivities

Living organisms, including human beings, rapidly show skin color changes after chemical poisonings, a result of toxicological or detoxification reactions caused by biological thiol compounds. On the other side, quick and portable detection of highly-volatile toxicants is an urgent need for improving human safety and personal protection, especially real-time monitoring of fumigants at low level for protection of farm workers and residents from overexposure of fumigants, vaporous pesticides. Here, we designed a rapid and portable detection method for methyl isothiocyanate (MITC) vapor by mimicking detoxification reactions of biological thiols in human bodies with MITC. The detection reaction was implemented on a nylon-6 nanofibrous membrane with ultrahigh surface areas to show color signals with the addition of Ellman's reagent. The reactivities of glutathione, N-acetyl-L-cysteine, L-homocysteine, cysteamine, and thioglycolic acid toward MITC were experimentally explored and theoretically discussed. The detection sensitivity is tunable in different biological thiol systems, which broadens the sensor applications in detection of trace amount of MITC in ambient environment and improves the protection of human safety. The new sensor system reduced the sensor operation time to 15 min and achieved the detection limit of 99 ppb, much lower than its permissible exposure limit (220 ppb).

Colorimetric Detection of Carcinogenic Alkylating Fumigants on Nylon-6 Nanofibrous Membrane. Part I: Investigation of 4-( p-Nitrobenzyl)pyridine as a "New" Sensing Agent with Ultrahigh Sensitivity

Alkylating fumigants are widely used in agricultural production for the control of soil-borne pests, but the acute toxicity and carcinogenicity of these chemicals pose a health threat to farm workers, as well as residents. A nanofibrous membrane-based colorimetric sensor relying on the nucleophilic substitution reaction of 4-( p-nitrobenzyl)pyridine (NBP) is introduced for the convenient and portable detection of alkylating fumigants. Comparing with the traditional use of NBP in detecting alkylating agents, this sensor system achieves a parts per billion level detection sensitivity toward alkylating fumigant gases without a high-temperature incubation or the addition of extra bases. The mechanisms of the detection reaction and the detection sensitivities of different fumigants were studied with computational methods, and the results comprehensively prove the proposed optimized detection mechanisms. The detection limit of methyl iodide, methyl bromide, and 1,3-dichloropropene successfully reaches to the limiting exposure concentrations (PEL or REL) with a naked-eye detectable color difference within 5 min with a dynamic detection procedure. The designed sensing system is promising for a real-time monitoring of the air quality related to alkylating fumigants in the environment, especially in agricultural and industrial areas.