High-Throughput Signal-On Photoelectrochemical Immunoassay of Lysozyme Based on Hole-Trapping Triggered by Disintegrating Bioconjugates of Dopamine-Grafted Silica Nanospheres

Signal amplification strategies in photoelectrochemical sensing of carcinoembryonic antigen

Early detection of cancer markers is critical for cancer diagnosis and cancer therapy since these markers may indicate cancer risk, incidence, and disease prognosis. Carcinoembryonic antigen (CEA) is a type of non-specific and broad-spectrum cancer biomarker commonly utilized for early cancer diagnosis. Moreover, it serves as an essential tool to assess the efficacy of cancer treatment and monitor tumor recurrence as well as metastasis, thus garnering significant attention for precise and sensitive CEA detection. In recent years, photoelectrochemical (PEC) techniques have emerged as prominent methods in CEA detection due to the advantages of PEC, such as simple equipment requirements, cost-effectiveness, high sensitivity, low interference from background signals, and easy of instrument miniaturization. Different signal amplification methods have been reported in PEC sensors for CEA analysis. Based on these, this article reviews PEC sensors based on various signal amplification strategies for detection of CEA during the last five years. The advantages and drawbacks of these sensors were discussed, as well as future challenges.

Developing portable and controllable fluorescence capillary imprinted sensor for visual detection Crohn's disease biomarkers

Simultaneous detection of multiple biomarker levels is essential to improve the accuracy of early diagnosis. Introducing capillary will simplify procedure, less time, and reduce reagent consumption for point-of-care testing of biomarkers. Here, we developed a portable and controllable smartphone-integrated fluorescence capillary imprinted sensing platform for the accuracy visual detection of Crohn's disease biomarkers (lysozyme, Fe3+) using single-excitation/double-signal detection. A novel controllable capillary coating strategy was developed by static gas-driven coating method for synthesis uniform fluorescence capillary imprinted sensor (Si-CD/g-CdTe@MIP capillary sensor). When Fe3+ and lysozyme were added, the fluorescence intensity of Si-CD/g-CdTe@MIP capillary sensor was quenched at 426 nm and enhanced at 546 nm, respectively. This Si-CD/g-CdTe@MIP capillary sensor has high sensitivity and selectivity for quantification lysozyme and Fe3+ simultaneously with the detection limit of 0.098 nM and 0.20 nM, respectively. In addition, the smartphone-integrated Si-CD/g-CdTe@MIP capillary sensor was applied for the intelligent detection of lysozyme and Fe3+, in which the detection limit was calculated as 0.32 nM and 0.65 nM. The smartphone-integrated visual Si-CD/g-CdTe@MIP capillary sensor realized ultrasensitive microanalysis (18 μL/time) of biomarkers in health man and Crohn 's patients, providing a novel strategy for early diagnosis of Crohn 's disease.

Type-I heterojunction destruction by In situ formation of Bi2S3 for split-type photoelectrochemical aptasensor

Development of new strategies in photoelectrochemical (PEC) sensors is an important way to realize sensitive detection of biomolecule. In this study, mesoporous silica nanospheres (MSNs)-assisted split-type PEC aptasensor with in situ generation of Bi₂S₃ was proposed to achieve reliable detection of prostate-specific antigen (PSA). To be more specific, this bioresponsive release system will release large amounts of Na₂S by the reaction between PSA and aptamer that capped Na₂S-loading MSNs. Next, the Na₂S reacts with Bi to yield BiOI/BiOBr/Bi₂S₃ composite, which leads to an alteration in the electron-hole transfer pathway of the photoelectric material and a decrease in the response. As the PSA concentration increases, more Na₂S can be released and lower photocurrent is obtained. The linear range under the optimal experimental conditions is 10 pg·mL^-1-1 μg⋅mL^-1, and the detection limit is 1.23 pg⋅mL^-1, which has satisfactory stability and anti-interference.

Temperature-Responsive Nanocarrier-Regulated Alternative Release of "Cargos" for a Multiplex Photoelectrochemical Bioassay of Antibiotic-Resistant Genes

A smart temperature stimuli-driven multiplex photoelectrochemical (PEC) assay was constructed for antibiotic resistance genes (ARGs) detection, where the stimuli-responsive gatekeeping by regulating the alternative release of "cargo" allowed for the simultaneous detection of multiple tetracycline resistance gene, using tetA (T_DNA1) and tetC (T_DNA2) as the model. Dual temperature-responsive nanoassemblies were embedded in the PEC bioassay as signal DNA tages: one thermoresponsive polymer (poly(N-isopropylacrylamide), PNIPAM)-capped mesoporous silica nanoparticles (MSN) with loading the "cargo" of HgO nanoparticles as signal DNA1 tags (S_DNA1-PNIPAM@MSN@HgONPs) and the other antimony tartrate (SbT)-anchored silica nanospheres as signal DNA2 tags (S_DNA2-SbT@SiO₂NSs). At 20 °C, below the lower critical solution temperature (LCST) of PNIPAM, the "gatekeeper" PNIPAM in S_DNA1-PNIPAM@MSN@HgONPs was in an ON state, igniting Hg²⁺ release through the pore of SiO₂. While at above LCST (40 °C), it was in an OFF state. Likewise, the thermo-dependent dissociation of SbT endowed the grafted S_DNA2 tags switching from the OFF (at 20 °C) to ON state (at 40 °C), igniting SbO⁺ release. The released Hg²⁺ and SbO⁺ triggered the amplified photocurrents due to the structure evolution of the photoactive layer into HgS/ZnS or Sb₂S₃/ZnS heterostructure, thus achieving sensitive detection of multiple ARGs: tetA, tetC, tetG, tetM, tetO, tetZ, tetX, and tetW. Combined with heat map analysis, rapid screening of the ARGs profiles in 12 samples could be realized. This bioassay is simple and accessible for multiple genes analysis with the detection limit down to 0.50 nM. And it was successfully applied for measuring tetracycline ARGs in real sludge samples.

Temperature-Responsive Magnetic Nanoparticles for Bioanalysis of Lysozyme in Urine Samples

Highly selective multifunctional magnetic nanoparticles containing a thermoresponsive polymer shell were developed and used in the sample pretreatment of urine for the assessment of lysozymuria in leukemia patients. Crosslinked poly(N-isopropylacrylamide-co-acrylic acid-co-N-tert-butylacrylamide) was grown onto silica-coated magnetic nanoparticles by reversible addition fragmentation chain transfer (RAFT) polymerization. The lysozyme binding property of the nanoparticles was investigated as a function of time, protein concentration, pH, ionic strength and temperature and their selectivity was assessed against other proteins. High-abundant proteins, like human serum albumin and γ-globulins did not interfere with the binding of lysozyme even at elevated concentrations characteristic of proteinuria. A sample cleanup procedure for urine samples has been developed utilizing the thermocontrollable protein binding ability of the nanoparticles. Method validation was carried out according to current bioanalytical method validation guidelines. The method was highly selective, and the calibration was linear in the 25 to 1000 µg/mL concentration range, relevant in the diagnosis of monocytic and myelomonocytic leukemia. Intra- and inter-day precision values ranged from 2.24 to 8.20% and 1.08 to 5.04%, respectively. Intra-day accuracies were between 89.9 and 117.6%, while inter-day accuracies were in the 88.8 to 111.0% range. The average recovery was 94.1 ± 8.1%. Analysis of unknown urine samples in comparison with a well-established reference method revealed very good correlation between the results, indicating that the new nanoparticle-based method has high potential in the diagnosis of lysozymuria.

MoSe2/CdSe Heterojunction Destruction by Cation Exchange for Photoelectrochemical Immunoassays with a Controlled-Release Strategy

Herein, a split-type immunoassay strategy instigated by cation exchange (CE) and changing the capacity of an electron donor in an electrolyte solution is optimized, namely, for differentiating the biological-specific binding assay and photoelectrochemical (PEC) analysis. MoSe₂/CdSe, a Z-scheme heterojunction with efficient visible light absorption and a low recombination of carriers, is used as a photoelectrode substrate. Silver ions (Ag⁺) as the initiator of CE are generated by the acidolysis of evenly loaded silver nanoparticles on mesoporous silica nanospheres (MSNs). The theoretical calculation and experimental results confirm that Ag⁺ replaces Cd²⁺ in CdSe and retains the crystal structure of MoSe₂. However, this behavior destroys the perfectly matched heterojunction structure and introduces defects, which led to the reduction of the photocurrent response. In addition, ascorbate oxidase in combination with MSNs can be used as a consumptive agent of the electron donor, which further improves the sensitivity and reliability of the sensor. As a proof of principle, neuron-specific enolase was applied to elucidate the potential application of the PEC immunoassay in clinical diagnosis, and the obtained linear range of the sensor was from 0.0001 to 100 ng/mL with a detection limit of 28 fg/mL (S/N = 3).

Split-Type Electrochemical Immunoassay System Triggering Ascorbic Acid-Mediated Signal Magnification Based on a Controlled-Release Strategy

This research put forward a novel split-type electrochemical (EC) immunosensor which integrated the controlled-release strategy with EC detection for application in the field of biosensing. Concretely, ascorbic acid (AA) was packaged in a cadmium sulfide (CdS)-capped spherical mesoporous bioactive glass (SBG) nanocarrier (SBG_CdS) on account of encapsulation technology. To reduce the complexity of the bioanalysis, the detection antibody-labeled SBG_CdS-AA bioconjugate was applied in a 96-well microplate for the immunoreaction process, which is independent of the EC determination procedure. Thus, the immune interference and steric hindrance caused by the accumulation of nanomaterials on the electrode could be minimized. Subsequently, AA was released efficiently via the destruction effect of dithiothreitol on the disulfide bond. In addition, for the as-prepared FcAI/l-Cys/gold nanoparticles (GNPs)/porous BiVO₄ (p-BVO)/ITO EC sensing platform in the detection solution, the synergetic catalysis of Fc and GNPs/p-BVO toward the oxidation of the released AA could be realized, which triggered AA-mediated significant signal magnification throughout this study. In particular, p-BVO with an ordered nanoarray structure could accelerate the electron transfer to assist in sensitivity improvement of this system. This novel biosensor was capable of assaying the neuron-specific enolase (NSE) biomarker sensitively, from which a linear range of 0.001-100 ng/mL was derived along with a low detection limit of 1.08 pg/mL. An innovative way could be paved in the bioanalysis of NSE and other biomarkers.

A novel split-type photoelectrochemical immunosensor based on chemical redox cycling amplification for sensitive detection of cardiac troponin I

Photoelectrochemical (PEC) immunoassay is a burgeoning and promising bioanalytical method. However, the practical application of PEC still exist some challenges such as the inevitable damage of biomolecules caused by the PEC system and the unsatisfactory sensitivity for biomarkers with low abundance in real sample. To solve the problems, we integrated the cosensitized structure of Ag2S/ZnO nanocomposities as photoelectrode with photogenerated hole-induced chemical redox cycling amplification (CRCA) strategy to develop a split-type PEC immunosensor for cardiac troponin I (cTnI) with high sensitivity. Initially, the immunoreaction was carried out on the 96-well plates in which alkaline phosphatase (ALP) could catalyze ascorbic acid 2-phosphate (AAP) to generate the signal-reporting species ascorbic acid (AA). Subsequently, the AA participated and the tris (2-carboxyethyl) phosphine (TCEP) mediated chemical redox cycling reaction took place on the photoelectrode, thus leading to signal amplification. Under the optimized conditions, the immunosensor demonstrated a detection limit (LOD) of 3.0 × 10^-15 g mL^-1 with a detection range of 1.0 × 10^-14 g mL^-1 to 1.0 × 10^-9 g mL^-1 for cTnI. Impressively, the proposed method could determine the cTnI in human serum samples with high sensitivity and satisfactory accuracy. Considering the virtues of the photoelectrode and the chemical redox cycling strategy, the method would hold great potential for highly sensitive biosensing and bioanalysis.

Aptasensors for lysozyme detection: Recent advances

Lysozyme is an enzyme existing in multiple organisms where it plays various vital roles. The most important role is its antibacterial activity in the human body; in fact, it is also called "the body's own antibiotic". Despite its proven utility, lysozyme can potentially trigger allergic reactions in sensitive individuals, even in trace amounts. Therefore, lysozyme determination in foods is becoming of paramount importance. Traditional detection methods are expensive, time-consuming and they cannot be applied for fast in-situ quantification. Electrochemical and optical sensors have attracted an increasing attention due to their versatility and ability to reduce the disadvantages of traditional methods. Using an aptamer as the bioreceptor, the sensor selectivity is amplified due to the specific recognition of the analyte. This review is presenting the progresses made in lysozyme determination by means of electrochemical and optical aptasensors in the last five years. A critical overview on the methodologies employed for aptamer immobilization and on the strategies for signal amplification of the assays will be described. Different optical and electrochemical aptasensors will be discussed and compared in terms of analytical performances, versatility and real samples applications.

Multiplexed tri-mode visual outputs of immunoassay signals on a clip-magazine-assembled photothermal biosensing disk

The photothermal biosensing principle is of increasing interest for point-of-care detection, but has rarely been applied in portable analytical devices in a lab-on-a-chip format. Herein, a photothermally responsive poly (methyl methacrylate) (PMMA)/paper hybrid disk (PT-Disk) was developed as a novel photothermal immunoassay device with the integration of a clip-magazine-assembled photothermal biosensing strategy. The PT-Disk consisted of a dissociative thermoresponsive hydrogel-loaded clip unit where the sandwich-type immunoreaction with an iron oxide-to-Prussian blue nanoparticle (PB NP) conversion took place and a magazine bearer for the rotational clip assembly and visual signal outputs. Upon laser irradiation of the clip-magazine-assembled PT-Disk, on-chip photothermal effect of PB NPs triggered both dose-dependent temperature elevation and the subsequent release of dye solutions from the central clip unit to surrounding magazine-bearing paper channels as the result of phase transition of the hydrogels, realizing multiplexed thermal image- and distance-based visual quantitative signal outputs in combination with the preliminary colorimetric readout on the PT-Disk. Using the multiplexed tri-mode signal outputs, the PT-Disk can quantify prostate specific antigen with limits of detection of 1.4-2.8 ng mL^-1. This is the first attempt to apply the photothermal biosensing principle in portable PMMA/paper-based analytical devices, which offers not only versatile on-chip visual quantitative signal outputs, but also the implementation of the photothermal biosensing principle in a lab-on-a-chip format.

Novel Electron Donor Encapsulation Assay Based on the Split-type Photoelectrochemical Interface

In this research, a controlled-release photoelectrochemical (PEC) immunosensor is proposed on the basis of a novel encapsulation strategy by all-inorganic semiconductor materials. The controlled-release transmit system has been prepared and represented on account of a group-functional mesoporous silica nanosphere (MSN), utilizing surface-functionalized cadmium sulfide (CdS) nanoparticles as mobilizable caps to encapsulate a PEC electron donor ascorbic acid (AA) within the MSN mesoporous structure. This encapsulation strategy proceeds without any enzyme and acid/alkali to achieve the release of an electron donor. The complex is formed by encapsulating AA within MSN with CdS (CdS@MSN-AA) as a signal amplifier labeled on the secondary antibody. In addition, the immunological recognition process was performed in a 96-well plate, and the reciprocal interference between biorecognition and PEC analysis could be eliminated through a split-type framework. Bi₂S₃-sensitized porous In₂O₃ nanoparticles as a substrate matrix provide basic PEC response. The developed sensor exhibited a mensurable output of procalcitonin (PCT) concentration (as an example) in the detection range of 0.001-200 ng/mL along with a limit of detection of 0.31 pg/mL. Featuring the novel method for electron release, this sensitive PEC strategy provides an innovative way for the potential application for other targets.

A dual mode photoelectrochemical sensor for nitrobenzene and L-cysteine based on 3D flower-like Cu2SnS3@SnS2 double interfacial heterojunction photoelectrode

In this work, 3D hierarchical Cu₂SnS₃@SnS₂ flower assembled from nanopetals with sandwich-like Cu₂SnS₃-SnS₂-Cu₂SnS₃ double interfacial heterojunction was successfully designed and synthesized on fluoride doped tin oxide (FTO) for photoelectrochemical (PEC) sensor by in situ electrodeposition p-type Cu₂SnS₃ nanoparticles on both inner and outer surfaces of n-type SnS₂ nanopetals. The unique double interfacial heterojunction simultaneously combines 3D flower-like architectures to drastically increase the light trapping and absorption in visible-near infrared range (Vis-NIR), and dramatically inhibites the charge carrier recombination, which is crucial for boosting the PEC activity. Benefitting from the shape and compositional merits, the Cu₂SnS₃@SnS₂ heterojunction possess dual-mode signal by controlling the electrodeposition time to manipulate the composition ratio of Cu₂SnS₃ and SnS₂. The Cu₂SnS₃@SnS₂/FTO electrode not only exhibits excellent photoeletro-reduction capacity for ultra-sensitive sensing trace persistent organic pollutant (nitrobenzene, NB), but also presents photoeletro-oxidization activity for high selective detection of L-cysteine (L-Cys) without any auxiliary enzyme under the light illumination. Dual mode sensor displayed superb performance for the detection of NB/L-Cys, showing a wide linear range from 100 pM to 300 μM/10 nM to 100 μM and a low detection limit (3S/N) of 68 pM/8.5 nM, respectively. Such a tunable double interfacial heterojunction design opened up new avenue for constructing multifunction PEC sensing platform.

Recent progress of heterostructure-based photoelectrodes in photoelectrochemical biosensing: a mini review

The heterostructure photoelectrodes have witted the rapid development to improve the performance of PEC biosensors recently.

Enhanced photoelectrochemical sensing performance of graphitic carbon nitride by nitrogen vacancies engineering

Ciprofloxacin (CIP) as a typical antibiotic is widely used to produce antimicrobial drugs. Determination of CIP has raised extensive concern due to its possible toxic effects on human health. Here, a simple photoelectrochemical (PEC) sensor for detecting CIP has been developed by using the nitrogen-deficient graphitic carbon nitride (ND-g-CN) as a PEC active material. The ND-g-CN material exhibits two-dimension (2D) thin sheet structure with abundant nitrogen vacancies. The 2D thin sheet structure can enable the effective charge separation and transfer, thus dramatically improving the PEC performance. Simultaneously, nitrogen vacancies can serve as charge trap to efficiently inhibit the charge recombination. Furthermore, the synergistic effect of the two can widen the absorption edge and decrease the band gap of ND-g-CN material, resulting in increasing light harvesting and enhancing PEC performance. CIP can be oxidized by the holes of ND-g-CN, thus realizing effective charge separation, which can result in the amplification of the photocurrent. The designed PEC sensor demonstrated a wide detection range from 60 to 19090 ng L^-1 and a low detection limit of 20 ng L^-1 for CIP assay. This strategy broadens the application of graphitic carbon nitride (g-CN) material in PEC field and presents a promising potential for the practical application in the environmental monitoring.

An antifouling interface integrated with HRP-based amplification to achieve a highly sensitive electrochemical aptasensor for lysozyme detection

We report here a highly sensitive sandwich type electrochemical aptasensor for lysozyme (lys) detection by the integration of an antifouling interface with HRP-based signal amplification. The biosensing interface with antifouling ability is designed, consisting of a lys-binding aptamer (LBA), dithiothreitol (DTT) and mercaptohexanol (MCH). When lys is captured by the immobilized LBA due to the specific recognition of the aptamer, gold nanoparticles (AuNPs) functionalized with HRP and LBA (HRP-AuNP-LBA) are further conjugated to the surface-bound lys, forming a sandwich assay format. HRP catalyzes the chemical oxidation of hydroquinone (HQ) by hydrogen peroxide (H₂O₂) to produce benzoquinone (BQ) which results in a large electrochemical reduction signal of BQ. Therefore, this reduction signal measured by differential pulse voltammetry (DPV) is used to detect lys. The catalytic behavior of HRP toward the reaction between HQ and H₂O₂, together with the high loading of HRP on AuNPs, remarkably amplifies the signal. A linear relationship between the DPV response and the logarithm of lys concentration from 0.01 pg mL^-1 to 10⁵ pg mL^-1 with a detection limit of 0.003 pg mL^-1 (S/N = 3) is obtained. The proposed biosensing platform combines antifouling ability and signal amplification, resulting in high sensitivity, providing an effective way for ultrasensitive assay of protein biomarkers in complex media.

Multifunctional Peroxidase-Encapsulated Nanoliposomes: Bioetching-Induced Photoelectrometric and Colorimetric Immunoassay for Broad-Spectrum Detection of Ochratoxins

In this study, a versatile dual-modal readout immunoassay platform was achieved for sensitive and broad-spectrum detection of ochratoxins based on the photocurrent response of flexible CdS/ZnO nanorod arrays/reduced graphene oxide and the localized surface plasmon resonance (LSPR) peak shift of Au nanobipyramids (Au NBPs). By using nanoliposomes as the vehicle to carry the secondary antibody and encapsulate horseradish peroxidase (HRP), the photocurrent change and the peak shift can be greatly amplified. The reaction mechanism was investigated in detail, indicating that HRP can trigger enzymatic bioetching in the presence of H₂O₂. In the photoelectrochemical detection, the oxidized HRP can etch CdS on the photoelectrode, resulting in the photocurrent change, while in the colorimetric detection, HRP can oxidize H₂O₂ to produce hydroxyl radicals that can etch Au NBPs to form multiple color changes and LSPR shifts. Compared with the common single-modal immunoassay for ochratoxins, such dual-modal immunoassay is more precise and reliable, owing to the completely independent signal conversion and transmission mechanism. Therefore, we hope that this accurate, simple, and visualized strategy may create a new avenue and provide innovative inspiration for food analysis.

Gold Nanoparticle-Induced Photocurrent Quenching and Recovery of Polymer Dots: Toward Signal-On Energy-Transfer-Based Photocathodic Bioanalysis of Telomerase Activity in Cell Extracts

Energy transfer (ET) in photoelectrochemical (PEC) bioanalysis is usually generated between noble metal nanoparticles (NPs) and traditional inorganic quantum dots (QDs). Using the innovative polymer dot (Pdot)-involved ET, this work reports the first signal-on and cathodic PEC bioanalysis toward telomerase (TE) activity in cell extracts. Specifically, the sequential binding of capture DNA (cDNA), telomerase primer sequence (TS), and Au NP-labeled probe DNA (Au NP-pDNA) on the electrode would place the Au NPs in close proximity of the Pdots, leading to obvious quenching of the cathodic photocurrent. The subsequent extension of the TS by TE in the presence of deoxyribonucleoside triphosphates (dNTPs) would then release the Ag NP-pDNA from the electrode, leading to the recovery of the photocurrent. On the basis of the Au NP-induced photocurrent quenching and the recovery of Pdots, a sensitive biosensor could thus be developed by tracking the photocurrents to probe the TE activity. This strategy allows for signal-on and cathodic PEC bioanalysis of TE, which can be easily extended for numerous other targets of interest. We believe this work could offer a new perspective for the rational implementation of Pdot-involved ET for advanced PEC bioanalysis.