Correlative Voltammetric Microscopy: Structure-Activity Relationships in the Microscopic Electrochemical Behavior of Screen Printed Carbon Electrodes

Five years of scanning electrochemical cell microscopy (SECCM): new insights and innovations

Scanning electrochemical cell microscopy (SECCM) is a nanopipette-based technique which enables measurement of localised electrochemistry. SECCM has found use in a wide range of electrochemical applications, and due to the wider uptake of this technique in recent years, new applications and techniques have been developed. This minireview has collected all SECCM research articles published in the last 5 years, to demonstrate and celebrate the recent advances, and to make it easier for SECCM researchers to remain well-informed. The wide range of SECCM applications is demonstrated, which are categorised here into electrocatalysis, electroanalysis, photoelectrochemistry, biological materials, energy storage materials, corrosion, electrosynthesis, and instrumental development. In the collection of this library of SECCM studies, a few key trends emerge. (1) The range of materials and processes explored with SECCM has grown, with new applications emerging constantly. (2) The instrumental capabilities of SECCM have grown, with creative techniques being developed from research groups worldwide. (3) The SECCM research community has grown significantly, with adoption of the SECCM technique becoming more prominent.

Practical guidelines for the use of scanning electrochemical cell microscopy (SECCM)

Scanning electrochemical cell microscopy (SECCM) has emerged as a transformative technology for electrochemical materials characterisation and the study of single entities, garnering global adoption by numerous research groups. While details on the instrumentation and operational principles of SECCM are readily available, the growing need for practical guidelines, troubleshooting strategies, and a systematic overview of applications and trends has become increasingly evident. This tutorial review addresses this gap by offering a comprehensive guide to the practical application of SECCM. The review begins with a discussion of recent developments and trends in the application of SECCM, before providing systematic approaches to (and the associated troubleshooting associated with) instrumental set up, probe fabrication, substrate preparation and the deployment of environmental (e.g., atmosphere and humidity) control. Serving as an invaluable resource, this tutorial review aims to equip researchers and practitioners entering the field with a comprehensive guide to essential considerations for conducting successful SECCM experiments.

Electrochemical Visualization of Membrane Proteins in Single Cells at a Nanoscale Using Scanning Electrochemical Cell Microscopy

The electrochemical visualization of proteins in the plasma membrane of single fixed cells was achieved with a spatial resolution of 160 nm using scanning electrochemical cell microscopy. The model protein, the carcinoembryonic antigen (CEA), is linked with a ruthenium complex (Ru(bpy)₃²⁺)-tagged antibody, which exhibits redox peaks in its cyclic voltammetry curves after a nanopipette tip contacts the cellular membrane. Based on the potential-resolved oxidation or reduction currents, an uneven distribution of membrane CEAs on the cells is electrochemically visualized, which could only be achieved previously using super-resolution optical microscopy. Compared with current electrochemical microscopy, the single-cell scanning electrochemical cell microscopy (SECCM) strategy not only improves the spatial resolution but also utilizes the potential-resolved current from the antibody-antigen complex to increase electrochemical imaging accuracy. Eventually, the electrochemical visualization of cellular proteins at the nanoscale enables the super-resolution study of cells to provide more biological information.

Evaluating Analytical Expressions for Scanning Electrochemical Cell Microscopy (SECCM)

Scanning electrochemical cell microscopy (SECCM) maps the electrochemical activity of a surface with nanoscale resolution using an electrolyte-filled nanopipette. The meniscus at the end of the pipet is sequentially placed at an array of locations across the surface, forming a series of nanometric electrochemical cells where the current-voltage response is measured. Quantitative interpretation of these responses typically employs numerical modeling to solve the coupled equations of transport and electron transfer, which require costly software or self-written code. Expertise and time are required to build and solve numerical models, which must be rerun for each new experiment. In contrast, algebraic expressions directly relate the current response to physical parameters. They are simpler to use, faster to calculate, and can provide greater insight but frequently require simplifying assumptions. In this work, we provide algebraic expressions for current and concentration distributions in SECCM experiments, which are formulated by approximating the pipet and meniscus using 1-D spherical coordinates. Expressions for the current and concentration distributions as a function of experimental parameters and in various conditions (steady state and time dependent, diffusion limited, and including migration) all show excellent agreement with numerical simulations employing a full geometry. Uses of the analytical expressions include determination of expected currents in experiments and quantifying electron-transfer rate constants in SECCM experiments.

Operando Scanning Electrochemical Probe Microscopy during Electrocatalysis

Scanning electrochemical probe microscopy (SEPM) techniques can disclose the local electrochemical reactivity of interfaces in single-entity and sub-entity studies. Operando SEPM measurements consist of using a SEPM tip to investigate the performance of electrocatalysts, while the reactivity of the interface is simultaneously modulated. This powerful combination can correlate electrochemical activity with changes in surface properties, e.g., topography and structure, as well as provide insight into reaction mechanisms. The focus of this review is to reveal the recent progress in local SEPM measurements of the catalytic activity of a surface toward the reduction and evolution of O₂ and H₂ and electrochemical conversion of CO₂. The capabilities of SEPMs are showcased, and the possibility of coupling other techniques to SEPMs is presented. Emphasis is given to scanning electrochemical microscopy (SECM), scanning ion conductance microscopy (SICM), electrochemical scanning tunneling microscopy (EC-STM), and scanning electrochemical cell microscopy (SECCM).

A pencil graphite-based disposable device for electrochemical monitoring of sulfanilamide in honey and water samples

The present paper reports a simple, fast, and inexpensive process of manufacturing a disposable pencil graphite electrode (PGE) from widely available materials, which showed a reproducibility of at least 7.5%. The electrode was compared to the commercial glassy carbon electrode (GCE) and showed superior electroanalytical performance for sulfanilamide (SFA) with approximately 3.9-fold higher current density. Additionally, a displacement of the oxidation peak from approximately 80 mV to more cathodic regions was observed. Therefore, a method based on square wave voltammetry (SWV) was developed for the determination of the antimicrobial SFA in honey and tap water samples using the proposed sensor. The optimized method presented good detectability (LOD = 2.37 μmol L^-1), with excellent precision and accuracy (relative standard deviation < 4.2%) and percent recovery from spiked samples ranging from 92 to 97%. In addition, the sensor did not suffer significant interference from sample matrix components and other commonly evaluated antimicrobials, which demonstrates the potential of these electrodes for implementation in routine analysis and quality control.

Surface Nanostructure Effects on Dopamine Adsorption and Electrochemistry on Glassy Carbon Electrodes

Dopamine (DA) adsorption and electron-transfer kinetics are strongly sensitive to the structure and composition of carbon electrodes. Activation of carbon surfaces is a popular method to improve DA detection, but the role of carbon structural features on DA behavior remains uncertain. Herein, we use scanning electrochemical cell microscopy (SECCM) for local anodization of glassy carbon (GC) electrodes in acid media followed by electrochemical imaging of DA adsorption and electrochemistry covering both unmodified and anodized GC regions of the same electrode. Electrochemical measurements of adsorbed DA involve the delivery of DA from the SECCM meniscus (30 μM) for 1 s periods followed by voltammetric analysis at a reasonable sweep rate (47 V s^-1). This general approach reduces effects from interelectrode variability and allows for considerable numbers of measurements and statistical analysis of electrochemical data sets. Localized electrode activity is correlated to surface structure and chemistry by a range of characterization techniques. Anodization enhances DA electron-transfer kinetics and provides more sites for adsorption (higher specific surface area). A consequence is that adsorption takes longer to approach completion on the anodized surface. In fact, normalizing DA surface coverage by the electrochemical surface area (ECSA) reveals that adsorption is less extensive on anodized surfaces compared to as-prepared GC on the same time scale. Thus, ECSA, which has often been overlooked when calculating DA surface coverage on carbon electrodes, even where different activation methods would be expected to result in different surface roughness and nanostructure, is an important consideration. Lower graphitic and higher oxygen content on anodized GC also suggest that oxygen-containing functional groups do not necessarily enhance DA adsorption and may have the opposite effect. This work further demonstrates SECCM as a powerful technique for revealing surface structure-function relationships and correlations at heterogeneous electrodes.

Nanoscale Visualization of Electrochemical Activity at Indium Tin Oxide Electrodes

Indium tin oxide (ITO) is a popular electrode choice, with diverse applications in (photo)electrocatalysis, organic photovoltaics, spectroelectrochemistry and sensing, and as a support for cell biology studies. Although ITO surfaces exhibit heterogeneous local electrical conductivity, little is known as to how this translates to electrochemistry at the same scale. This work investigates nanoscale electrochemistry at ITO electrodes using high-resolution scanning electrochemical cell microscopy (SECCM). The nominally fast outer-sphere one-electron oxidation of 1,1'-ferrocenedimethanol (FcDM) is used as an electron transfer (ET) kinetic marker to reveal the charge transfer properties of the ITO/electrolyte interface. SECCM measures spatially resolved linear sweep voltammetry at an array of points across the ITO surface, with the topography measured synchronously. Presentation of SECCM data as current maps as a function of potential reveals that, while the entire surface of ITO is electroactive, the ET activity is highly spatially heterogeneous. Kinetic parameters (standard rate constant, k0, and transfer coefficient, α) for FcDM0/+ are assigned from 7200 measurements at sites across the ITO surface using finite element method modeling. Differences of 3 orders of magnitude in k0 are revealed, and the average k0 is about 20 times larger than that measured at the macroscale. This is attributed to macroscale ET being largely limited by lateral conductivity of the ITO electrode under electrochemical operation, rather than ET kinetics at the ITO/electrolyte interface, as measured by SECCM. This study further demonstrates the considerable power of SECCM for direct nanoscale characterization of electrochemical processes at complex electrode surfaces.

Graphene-Fiber Microelectrodes for Ultrasensitive Neurochemical Detection

Here, we have synthesized and characterized graphene-fiber microelectrodes (GFME's) for subsecond detection of neurochemicals with fast-scan cyclic voltammetry (FSCV) for the first time. GFME's exhibited extraordinary properties including faster electron transfer kinetics, significantly improved sensitivity, and ease of tunability that we anticipate will have major impacts on neurochemical detection for years to come. GF's have been used in the literature for various applications; however, scaling their size down to microelectrodes and implementing them as neurochemical microsensors is significantly less developed. The GF's developed in this paper were on average 20-30 μm in diameter and both graphene oxide (GO) and reduced graphene oxide (rGO) fibers were characterized with FSCV. Neat GF's were synthesized using a one-step dimension-confined hydrothermal strategy. FSCV detection has traditionally used carbon-fiber microelectrodes (CFME's) and more recently carbon nanotube fiber electrodes; however, uniform functionalization and direct control of the 3D surface structure of these materials remain limited. The expansion to GFME's will certainly open new avenues for fine-tuning the electrode surface for specific electrochemical detection. When comparing to traditional CFME's, our GFME's exhibited significant increases in electron transfer, redox cycling, fouling resistance, higher sensitivity, and frequency independent behavior which demonstrates their incredible utility as biological sensors.

Adiabatic versus non-adiabatic electron transfer at 2D electrode materials

2D electrode materials are often deployed on conductive supports for electrochemistry and there is a great need to understand fundamental electrochemical processes in this electrode configuration. Here, an integrated experimental-theoretical approach is used to resolve the key electronic interactions in outer-sphere electron transfer (OS-ET), a cornerstone elementary electrochemical reaction, at graphene as-grown on a copper electrode. Using scanning electrochemical cell microscopy, and co-located structural microscopy, the classical hexaamineruthenium (III/II) couple shows the ET kinetics trend: monolayer > bilayer > multilayer graphene. This trend is rationalized quantitatively through the development of rate theory, using the Schmickler-Newns-Anderson model Hamiltonian for ET, with the explicit incorporation of electrostatic interactions in the double layer, and parameterized using constant potential density functional theory calculations. The ET mechanism is predominantly adiabatic; the addition of subsequent graphene layers increases the contact potential, producing an increase in the effective barrier to ET at the electrode/electrolyte interface.

Electrochemistry, ion adsorption and dynamics in the double layer: a study of NaCl(aq) on graphite

Graphite and related sp² carbons are ubiquitous electrode materials with particular promise for use in e.g., energy storage and desalination devices, but very little is known about the properties of the carbon–electrolyte double layer at technologically relevant concentrations. Here, the (electrified) graphite–NaCl(aq) interface was examined using constant chemical potential molecular dynamics (CμMD) simulations; this approach avoids ion depletion (due to surface adsorption) and maintains a constant concentration, electroneutral bulk solution beyond the surface. Specific Na⁺ adsorption at the graphite basal surface causes charging of the interface in the absence of an applied potential. At moderate bulk concentrations, this leads to accumulation of counter-ions in a diffuse layer to balance the effective surface charge, consistent with established models of the electrical double layer. Beyond ∼0.6 M, however, a combination of over-screening and ion crowding in the double layer results in alternating compact layers of charge density perpendicular to the interface. The transition to this regime is marked by an increasing double layer size and anomalous negative shifts to the potential of zero charge with incremental changes to the bulk concentration. Our observations are supported by changes to the position of the differential capacitance minimum measured by electrochemical impedance spectroscopy, and are explained in terms of the screening behaviour and asymmetric ion adsorption. Furthermore, a striking level of agreement between the differential capacitance from solution evaluated in simulations and measured in experiments allows us to critically assess electrochemical capacitance measurements which have previously been considered to report simply on the density of states of the graphite material at the potential of zero charge. Our work shows that the solution side of the double layer provides the more dominant contribution to the overall measured capacitance. Finally, ion crowding at the highest concentrations (beyond ∼5 M) leads to the formation of liquid-like NaCl clusters confined to highly non-ideal regions of the double layer, where ion diffusion is up to five times slower than in the bulk. The implications of changes to the speciation of ions on reactive events in the double layer are discussed.

CμMD reveals multi-layer electrolyte screening in the double layer beyond 0.6 M, which affects ion activities, speciation and mobility; asymmetric charge screening explains concentration dependent changes to electrochemical properties.

Artificial Synapse: Spatiotemporal Heterogeneities in Dopamine Electrochemistry at a Carbon Fiber Ultramicroelectrode

An artificial synapse is developed that mimics ultramicroelectrode (UME) amperometric detection of single cell exocytosis. It comprises the nanopipette of a scanning ion conductance microscope (SICM), which delivers rapid pulses of neurotransmitter (dopamine) locally and on demand at >1000 defined locations of a carbon fiber (CF) UME in each experiment. Analysis of the resulting UME current-space-time data reveals spatiotemporal heterogeneous electrode activity on the nanoscale and submillisecond time scale for dopamine electrooxidation at typical UME detection potentials. Through complementary surface charge mapping and finite element method (FEM) simulations, these previously unseen variations in electrochemical activity are related to heterogeneities in the surface chemistry of the CF UME.

Characterization of Ligand Adsorption at Individual Gold Nanocubes

Cetyltrimethylammonium bromide (CTAB) is a widely used surfactant that aids the aqueous synthesis of colloidal nanoparticles. However, the presence of residual CTAB on nanoparticle surfaces can significantly impact nanoparticle applications, such as catalysis and sensing, under hydrated conditions. As such, consideration of the presence and quantity of CTAB on nanoparticle surfaces under hydrated conditions is of significance. Herein, as part of an integrated material characterization framework, we demonstrate the feasibility of in situ atomic force microscopy (AFM) to detect CTAB on the surface of Au nanocubes (Au NCs) under hydrated conditions, which enabled superior characterization compared to conventional spectroscopic methods. In situ force-distance (FD) spectroscopy and Kelvin probe force microscopy (KPFM) measurements support additional characterization of adsorbed CTAB, while correlative in situ AFM and scanning electron microscopy (SEM) measurements were used to evaluate sequential steps of CTAB removal from Au NCs across hydrated and dehydrated environments, respectively. Notably, a substantial quantity of CTAB remained on the Au NC surface after methanol washing, which was detected in AFM measurements but was not detected in infrared spectroscopy measurements. Subsequent electrochemical cleaning was found to be critically important to remove CTAB from the Au NC surface. Correlative measurements were also performed on individual nanoparticles, which further validate the method described here as a powerful tool to determine the extent and degree of CTAB removal from nanoparticle surfaces. This AFM-based method is broadly applicable to characterize the presence and removal of ligands from nanomaterial surfaces under hydrated conditions.

Visualization and Quantification of Electrochemical H2 Bubble Nucleation at Pt, Au, and MoS2 Substrates

Electrolytic gas evolution is a significant phenomenon in many electrochemical technologies from water splitting, chloralkali process to fuel cells. Although it is known that gas evolution may substantially affect the ohmic resistance and mass transfer, studies focusing on the electrochemistry of individual bubbles are critical but also challenging. Here, we report an approach using scanning electrochemical cell microscopy (SECCM) with a single channel pipet to quantitatively study individual gas bubble nucleation on different electrode substrates, including conventional polycrystalline Pt and Au films, as well as the most interesting two-dimensional semiconductor MoS₂. Due to the confinement effect of the pipet, well-defined peak-shaped voltammetric features associated with single bubble nucleation and growth are consistently observed. From stochastic bubble nucleation measurement and finite element simulation, the surface H₂ concentration corresponding to bubble nucleation is estimated to be ∼218, 137, and 157 mM, with critical nuclei contact angles of ∼156°, ∼161°, and ∼160° at polycrystalline Pt, Au, and MoS₂ substrates, respectively. We further demonstrated the surface faceting at polycrystalline Pt is not specifically correlated with the bubble nucleation behavior.

Exploring carbon particle type and plasma treatment to improve electrochemical properties of stencil-printed carbon electrodes

Stencil-printing conductive carbon inks has revolutionized the development of inexpensive, disposable and portable electrochemical sensors. However, stencil-printed carbon electrodes (SPCEs) typically suffer from poor electrochemical properties. While many surface pretreatments and modifications have been tested to improve the electrochemical activity of SPCEs, the bulk composition of the inks used for printing has been largely ignored. Recent studies of other carbon composite electrode materials show significant evidence that the conductive carbon particle component is strongly related to electrochemical performance. However, such a study has not been carried out with SPCEs. In this work, we perform a systematic characterization of SPCEs made with different carbon particle types including graphite particles, glassy carbon microparticles and carbon black. The relationship between carbon particle characteristics including particle size, particle purity, and particle morphology as well as particle mass loading on the fabrication and electrochemical properties of SPCEs is studied. SPCEs were plasma treated for surface activation and the electrochemical properties of both untreated and plasma treated SPCEs are also compared. SPCEs displayed distinct analytical utilities characterized through solvent window and double layer capacitance. Cyclic voltammetry (CV) of several standard redox probes, FcTMA+, ferri/ferrocyanide, and pAP was used to establish the effects of carbon particle type and plasma treatment on electron transfer kinetics of SPCEs. CV of the biologically relevant molecules uric acid, NADH and dopamine was employed to further illustrate the differences in sensing and fouling characteristics of SPCEs fabricated with different carbon particle types. SEM imaging revealed significant differences in the SPCE surface microstructures. This systematic study demonstrates that the electrochemical properties of SPCEs can be tuned and significantly improved through careful selection of carbon particle type and plasma cleaning with a goal toward the development of better performing electrochemical point-of-need sensors.

Oil-Immersed Scanning Micropipette Contact Method Enabling Long-term Corrosion Mapping

This work reports the development of an oil-immersed scanning micropipette contact method, a variant of the scanning micropipette contact method, where a thin layer of oil wets the investigated substrate. The oil-immersed scanning micropipette contact method significantly increases the droplet stability, allowing for prolonged mapping and the use of highly evaporative saline solutions regardless of ambient humidity levels. This systematic mapping technique was used to conduct a detailed investigation of localized corrosion taking place at the surface of an AA7075-T73 aluminum alloy in a 3.5 wt % NaCl electrolyte solution, which is typically challenging in the conventional scanning micropipette contact method. Maps of corrosion potentials and corrosion currents extracted from potentiodynamic polarization curves showed good correlations with the chemical composition of surface features and known galvanic interactions at the microscale level. This demonstrates the viability of the oil-immersed scanning micropipette contact method and opens up the avenue to mechanistic corrosion investigations at the microscale level using aqueous solutions that are prone to evaporation under noncontrolled humidity levels.

Investigating the Redox Properties of Two-Dimensional MoS2 Using Photoluminescence Spectroelectrochemistry and Scanning Electrochemical Cell Microscopy

Control over photophysical and chemical properties of two-dimensional (2D) transition metal dichalcogenides (TMDs) is the key to advance their applications in next-generation optoelectronics. Although chemical doping and surface modification with plasmonic metals have been reported to tune the photophysical and catalytic properties of 2D TMDs, there have been few reports of tuning optical properties using dynamic electrochemical control of electrode potential. Herein, we report (1) the photoluminescence (PL) enhancement and red-shift in the PL spectrum of 2D MoS₂, synthesized by chemical vapor deposition and subsequent transfer onto an indium tin oxide electrode, upon electrochemical anodization and (2) spatial heterogeneities in its photoelectrochemical (PEC) activities. Spectroelectrochemistry shows that positive electrochemical bias causes an initial ten-fold increase in the PL intensity followed by a quick decrease in the enhancement. The PL enhancement and spectrum red-shift are associated with the decrease in nonradiative decay rates of excitons formed upon electrochemical anodization of 2D MoS₂. Additionally, scanning electrochemical cell microscopy (SECCM) study shows that the 2D MoS₂ crystal is spatially sensitive to PEC oxidation at positive potentials. SECCM also shows a photocurrent increase caused by spatially heterogeneous edge-type defect sites of the crystal.

Array Microcell Method (AMCM) for Serial Electroanalysis

We describe a method for electrochemical measurement and synthesis based on the combination of a mobile micropipette and a microelectrode array, which we term the array microcell method (AMCM). AMCM has the ability to address single electrodes within a microelectrode array (MEA) and provides a simple, low-cost format to enable versatile electrochemical measurements. In AMCM, a droplet at the tip of a movable micropipette (inner diameter of 50 μm) functions as an electrochemical cell, in which the electrode area is defined by a microelectrode of the array. We also report carbon MEAs that are well suited for AMCM and are fabricated from pyrolyzed photoresist films (PPFs). PPF-MEAs with nominal electrode diameters of 5.5 μm are characterized by AMCM, standard macroscale electrochemical methods, and finite element modeling. The versatility of AMCM is demonstrated by measurement of single Pt microparticles and by electrodeposition of shapecontrolled Pt nanoparticles.

Low-cost, thin-film, mass-manufacturable carbon electrodes for detection of the neurotransmitter dopamine

A flexible, thin-film carbon electrode is reported for detection of the key neurotransmitter dopamine using standard electroanalytical techniques of cyclic voltammetry, differential pulse voltammetry and square wave voltammetry. The thin-film electrode has been explored as a possible low-cost solution to detect low concentrations of dopamine and its performance has been compared with a commercially available screen printed carbon electrode. It was found that the thin-film electrode is more sensitive than the screen printed electrode, and can faithfully detect dopamine between 50 pM and 1 mM concentrations. The electrode provides a limit of detection of ~50 pM, displays good selectivity between dopamine and ascorbic acid, and is able to show a level of differentiation between the two compounds in terms of peak currents as well as oxidative potentials at physiologically relevant concentrations. This is in contrast to the screen printed electrode which is unable to discriminate between dopamine and ascorbic acid at the same concentrations. The key advantages of the presented electrode system are its low-cost, flexible substrate, and the ability to achieve very low levels of dopamine detection without requiring any electrode surface modification steps, a key factor in reducing fabrication costs and overall device complexity.