Background Signal-Free Magnetic Bioassay for Food-Borne Pathogen and Residue of Veterinary Drug via Mn(VII)/Mn(II) Interconversion

A sensitive Ag+-mediated magnetic relaxation and colorimetry dual-mode sensing platform

To address the relatively low sensitivity of current redox reagent-mediated magnetic relaxation sensing methods, we present a novel Ag+-mediated magnetic sensing platform that enhances the sensitivity by three orders of magnitude. The new sensing platform is based on Ag+-catalyzed oxidation of Mn2+ to KMnO4, accompanied by a distinct color change, which facilitates colorimetric detection. In the case of insufficient Ag+ ions, MnO2 is an additional oxidation product and the KMnO4/MnO2 ratio is dependent on the concentration of Ag+. When combined with a specific quantity of reducing agent, both KMnO4 and MnO2 are reduced to Mn2+ with a large relaxivity, and the concentration of Mn2+ in the resultant solution inversely correlates with the amount of KMnO4 since KMnO4 consumes more reductant during reduction. Consequently, the transverse relaxation rate of the solution exhibits a negative correlation with the Ag+ concentration. Thus, by coupling this Ag+-mediated Mn2+ to KMnO4 transformation with reactions that modulate Ag+ concentration, a dual-mode sensing platform for magnetic relaxation and colorimetry can be realized. Herein, we take H2O2 as an example to verify the detection performance of this sensing platform since H2O2 can oxidize Ag0 in Ag@Fe3O4 nanoparticles to Ag+. Experimental findings demonstrate detection limits of 10 nM and 20 nM for the magnetic relaxation and colorimetry modes, respectively, affirming the excellent sensitivity and the potential practical application of this strategy.

A Novel Multiarmed Bifunctional PEG Derivative for the Preparation of Mass Spectrometry Ion Sources with Antifouling Property and High Selectivity

It is challenging to prepare a highly selective mass spectrometry (MS) ion source for the rapid and highly sensitive detection of analytes, especially mycotoxins. In this study, an amino and tetrazine bifunctionalized multiarm PEG derivative (NH2HCl-4armPEG10K-(MTz)3), which can be easily immobilized on the substrate by the addition reaction between amino and polydopamine, was used for the preparation of MS ionization substrate. NH2HCl-4armPEG10K-(MTz)3 can also be used as a linker to immobilize sufficient streptavidin (SA) on the surface of the substrate by a click reaction. The process further promotes the immobilization of broad-spectrum antibodies (3D4), which were used as the recognition element for ZEN and its metabolites. The prepared SSS-Au-PDA-4armPEG10K-SA-3D4 not only can rapidly enrich ZEN and its metabolites with high selectivity but also shows good antifouling properties in the matrix. After simple sample preparation, the prepared SSS-Au-PDA-4armPEG10K-SA-3D4 can be directly coupled with MS to achieve high sensitivity (LODs: 0.18-0.66 ng/mL, LOQs: 0.5-1.0 ng/mL) and selective detection of ZEN and its metabolites in the matrix. At the same time, satisfactory recoveries (83.60-97.80%) and precision (RSD: 2.80-9.10%) can also be obtained. The prepared SSS-Au-PDA-4armPEG10K-SA-3D4 is expected to provide a powerful tool for the rapid and highly sensitive determination of multiple targets by MS.

Multienzyme-Mediated Dual-Channel Magnetic Relaxation Switching Taste Biosensor (D-MRSTB) for Simultaneous Detection of Umami Compounds and Synergistic Enhancement in Food

Umami substances play a significant role in the evaluation of food quality, and their synergistic enhancement is of great importance in improving and intensifying food flavors and tastes. Current biosensors available for umami detection still confront challenges in simultaneous quantification of multiple umami substances and umami intensities. In this study, an innovative dual-channel magnetic relaxation switching taste biosensor (D-MRSTB) was developed for the quantitative detection of representative umami substances. The multienzyme signal of D-MRSTB specifically catalyzes the umami substances of interest to generate hydrogen peroxide (H2O2), which is then used to oxidate Fe2+ to Fe3+. Such a valence-state transition of paramagnetic ions was utilized as a magnetic relaxation signaling switch to influence the transverse magnetic relaxation time (T2) within the reaction milieu, thus achieving simultaneous detection of monosodium glutamate (MSG) and inosine 5'-monophosphate (IMP). The biosensor showed good linearity (R2 > 0.99) in the concentration range of 50-1000 and 10-1000 μmol/L, with limits of detection (LOD) of 0.61 and 0.09 μmol/L for MSG and IMP, respectively. Furthermore, the biosensor accurately characterized the synergistic effect of the mixed solution of IMP and MSG, where ΔT2 showed a good linear relationship with the equivalent umami concentration (EUC) of the mixed solution (R2 = 0.998). Moreover, the D-MRSTB successfully achieved the quantitative detection of umami compounds in real samples. This sensing technology provides a powerful tool for achieving the detection of synergistic enhancement among umami compounds and demonstrates its potential for application in the food industry.

Well plate-based LF-NMR/colorimetric dual-mode homogeneous immunosensor for Vibrio parahaemolyticus detection

A 96-well plate-based low-field nuclear magnetic resonance (LF-NMR)/colorimetric dual-mode homogeneous immunosensor was developed for the detection of pathogen bacteria, using Vibrio parahaemolyticus (VP) as a detection template. The signal unit MNS@Ab2 is graphene oxide (GO) simultaneously loaded with VP antibody and Fe3O4 nanoparticles. A 96-well plate coated with VP antibody captures the target VP, which then binds the signal unit to form the immunocomplex. After acidolysed, Fe3O4 nanoparticles are transformed into Fe3+ and Fe2+, so the non-homogeneous system is transformed into a homogeneous one. The addition of KMnO4 can not only convert Fe2+ into Fe3+ but also provide Mn2+, improving the detection sensitivity. And, colorimetric analysis can be achieved by the quantitative reduction of KMnO4. Under the optimal experimental conditions, the limit of detection was 60 CFU/mL with good selectivity, stability, precision, accuracy, and consistency, providing a simple and reliable detection platform for pathogenic bacteria in food.

Multisignal Biosensors Based on Mn Paramagnetic Relaxation and Nanocatalysis for Norovirus Detection

A multisignal method for the sensitive detection of norovirus based on Mn paramagnetic relaxation and nanocatalysis was developed. This dual-modality sensing platform was based on the strong relaxation generated by cracked Au@MnO2 nanoparticles (NPs) and their intrinsic enzyme-like activity. Ascorbic acid rapidly cracked the MnO2 layer of Au@MnO2 NPs to release Mn(II), resulting in the relaxation modality being in a "switch-on" state. Under the optimal conditions, the relaxation modality exhibited a wide working range (6.02 × 103-3.01 × 107 copies/μL) and a limit of detection (LOD) of 2.29 × 103 copies/μL. Using 4,4',4″,4″'-(porphine-5,10,15,20-tetrayl) tetrakis (benzenesulfonic acid) (tpps)-β-cyclodextrin (tpps-β-CD) as a T1 relaxation signal amplification reagent, a lower LOD was obtained. The colorimetric modality exploited the "peroxidase/oxidase-like" activity of Au@MnO2 NPs, which catalyzed the oxidation of colorless 3,3',5,5'-tetramethylbenzidine (TMB) to blue oxidized TMB, which exhibited a working range (6.02 × 104-6.02 × 106 copies/μL) and an LOD of 2.6 × 104 copies/μL. In addition, the rapid amplification reaction of recombinase polymerase enabled the detection of low norovirus levels in food samples and obtained a working range of 101-106 copies/mL and LOD of 101 copies/mL (relaxation modality). The accuracy of the sensor in the analysis of spiked samples was consistent with that of the real-time quantitative reverse transcription polymerase chain reaction, demonstrating the high accuracy and practical utility of the sensor.

Advanced diagnostic methods for identification of bacterial foodborne pathogens: contemporary and upcoming challenges

It is a public health imperative to have safe food and water across the population. Foodborne infections are one of the primary causes of sickness and mortality in both developed and developing countries. An estimated 100 million foodborne diseases and 120 000 foodborne illness-related fatalities occur each year in India. Several factors affect foodborne illness, such as improper farming methods, poor sanitary and hygienic conditions at all levels of the food supply chain, the lack of preventative measures in the food processing industry, the misuse of food additives, as well as improper storage and handling. In addition, chemical and microbiological combinations also play a key role in disease development. But recent disease outbreaks indicated that microbial pathogens played a major role in the development of foodborne diseases. Therefore, prompt, rapid, and accurate detection of high-risk food pathogens is extremely vital to warrant the safety of the food items. Conventional approaches for identifying foodborne pathogens are labor-intensive and cumbersome. As a result, a range of technologies for the rapid detection of foodborne bacterial pathogens have been developed. Presently, many methods are available for the instantaneous detection, identification, and monitoring of foodborne pathogens, such as nucleic acid-based methods, biosensor-based methods, and immunological-based methods. The goal of this review is to provide a complete evaluation of several existing and emerging strategies for detecting food-borne pathogens. Furthermore, this review outlines innovative methodologies and their uses in food testing, along with their existing limits and future possibilities in the detection of live pathogens in food.

Construction of a Highly Selective Enrichment, Ionization, and Detection Platform Based on a Broad-Spectrum Antibody

Ambient mass spectrometry (AMS) allows direct analysis of various raw food samples with minimal or no sample pretreatment, but the trace analytes in complex food samples still have problems with limitations. In this work, we developed a platform based on coated stainless steel sheet spray mass spectrometry for fast, in situ, high-throughput, and high selectivity multiresidue analysis of fluoroquinolone drugs (FQs). The sensitivity of the platform was enhanced via coupling broad-spectrum antibodies against FQs to graphene oxide coated blade spray (CBS)-MS through a streptavidin-biotin (SA-biotin) interaction. The prepared platform had sufficient loading capacity for SA (1.37 mg/piece) and the antibody (84.8 μg/piece), which is greater than that of physical mixing and the EDC/NHS covalent coupling strategy. With simplified sample pretreatment, this platform demonstrated comparable sensitivity to high performance liquid chromatography-mass spectrometry (HPLC-MS/MS) (0.08-0.16 ng/mL in phosphate-buffered saline and 0.21-0.32 ng/mL in diluted milk). Meanwhile, compared with HPLC-MS/MS, the method is rapid (enrichment: 10 min, detection: <1 min) and acceptable recoveries (81.94-102.08%) can be obtained. The presence of analytes can be monitored by MS/MS spectra, and multiple analytes can be measured simultaneously in a single assay. This study is expected to provide a powerful and portable tool for rapid laboratory analysis and reliable screening in the field.

A facile and sensitive magnetic relaxation sensing strategy based on the conversion of Fe3+ ions to Prussian blue precipitates for the detection of alkaline phosphatase and ascorbic acid oxidase

Herein, a novel magnetic relaxation sensing strategy based on the change in Fe³⁺ content has been proposed by utilizing the conversion of Fe³⁺ ions to Prussian blue (PB) precipitates. Compared with the common detection approach based on the valence state change of Fe³⁺ ions, our strategy can cause a larger change in the relaxation time of water protons and higher detection sensitivity since PB precipitate can induce a larger change in the Fe³⁺ ion concentration and has a weaker effect on the relaxation process of water protons relative to Fe²⁺ ions. Then, we employ alkaline phosphatase (ALP) as a model target to verify the feasibility and detection performance of the as-proposed strategy. Actually, ascorbic acid (AA) generated from the ALP-catalyzed L-ascorbyl-2-phosphate hydrolysis reaction can reduce potassium ferricyanide into potassium ferrocyanide, and potassium ferrocyanide reacts with Fe³⁺ to form PB precipitates, leading to a higher relaxation time. Under optimum conditions, the method for ALP detection has a wide linear range from 5 to 230 mU/mL, and the detection limit is 0.28 mU/mL, sufficiently demonstrating the feasibility and satisfactory analysis performance of this strategy, which opens up a new path for the construction of magnetic relaxation sensors. Furthermore, this strategy has also been successfully applied to ascorbic acid oxidase detection, suggesting its expansibility in magnetic relaxation detection.

Conventional and advanced detection techniques of foodborne pathogens: A comprehensive review

Foodborne pathogens are a major public health concern and have a significant economic impact globally. From harvesting to consumption stages, food is generally contaminated by viruses, parasites, and bacteria, which causes foodborne diseases such as hemorrhagic colitis, hemolytic uremic syndrome (HUS), typhoid, acute, gastroenteritis, diarrhea, and thrombotic thrombocytopenic purpura (TTP). Hence, early detection of foodborne pathogenic microbes is essential to ensure a safe food supply and to prevent foodborne diseases. The identification of foodborne pathogens is associated with conventional (e.g., culture-based, biochemical test-based, immunological-based, and nucleic acid-based methods) and advances (e.g., hybridization-based, array-based, spectroscopy-based, and biosensor-based process) techniques. For industrial food applications, detection methods could meet parameters such as accuracy level, efficiency, quickness, specificity, sensitivity, and non-labor intensive. This review provides an overview of conventional and advanced techniques used to detect foodborne pathogens over the years. Therefore, the scientific community, policymakers, and food and agriculture industries can choose an appropriate method for better results.

Cluster-bomb type magnetic biosensor for ultrasensitive detection of Vibrio parahaemolyticus based on low field nuclear magnetic resonance

Herein, a novel cluster-bomb type signal sensing and amplification strategy in low field nuclear magnetic resonance was proposed, and a magnetic biosensor for ultrasensitive homogeneous immunoassay of Vibrio parahaemolyticus (VP) was developed. The capture unit MGO@Ab was magnetic graphene oxide (MGO) immobilized by VP antibody (Ab) to capture VP. And, the signal unit PS@Gd-CQDs@Ab was polystyrene (PS) pellets covered by Ab to recognize VP and Gd-CQDs i.e. carbon quantum dots (CQDs) containing lots of magnetic signal labels Gd³⁺. In presence of VP, the immunocomplex signal unit-VP-capture unit could be formed and separated by magnetic force conveniently from the sample matrix. With the successive introduction of disulfide threitol and hydrochloric acid, signal units were cleaved and disintegrated, resulting in a homogeneous dispersion of Gd³⁺. Thus, cluster-bomb type dual signal amplification was achieved through increasing the amount and the dispersity of signal labels simultaneously. Under optimal experimental conditions, VP could be detected in the concentration range of 5-1.0 × 10⁶ CFU/mL, with a limit of quantitation (LOQ) 4 CFU/mL. In addition, satisfactory selectivity, stability and reliability could be obtained. Therefore, this cluster-bomb type signal sensing and amplification strategy is powerful in designing magnetic biosensor and detecting pathogenic bacteria.

An Efficient Multilayer Approach to Model DNA-Based Nanobiosensors

In this work, we present a full computational protocol to successfully obtain the one-electron reduction potential of nanobiosensors based on a self-assembled monolayer of DNA nucleobases linked to a gold substrate. The model is able to account for conformational sampling and environmental effects at a quantum mechanical (QM) level efficiently, by combining molecular mechanics (MM) molecular dynamics and multilayer QM/MM/continuum calculations within the framework of Marcus theory. The theoretical model shows that a guanine-based biosensor is more prone to be oxidized than the isolated nucleobase in water due to the electrostatic interactions between the assembled guanine molecules. In addition, the redox properties of the biosensor can be tuned by modifying the nature of the linker that anchor the nucleobases to the metal support.

CRISPR/Cas12a-based magnetic relaxation switching biosensor for nucleic acid amplification-free and ultrasensitive detection of methicillin-resistant Staphylococcus aureus

Herein, we develop a CRISPR/Cas12a-based magnetic relaxation switching (C-MRS) biosensor for ultrasensitive and nucleic acid amplification-free detection of methicillin-resistant Staphylococcus aureus (MRSA) in food. In this biosensor, mecA gene in MRSA was recognized by CRISPR-RNA, which will activate the trans-cleavage activity of Cas12a and release the fastened alkaline phosphatase (ALP) on the particle. The freed ALP can then use to hydrolyze substrate to produce ascorbic acid that trigger the click reaction between magnetic probe. The transverse relaxation time of the unbound magnetic probe can be measured for signal readout. By incorporating collateral activity of CRISPR/Cas12a, on-particle rolling circle amplification, and ALP-triggered click chemistry into background-free MRS, as low as 16 CFU/mL MRSA can be detected without any nucleic acid pre-amplification, which avoids carryover contamination, but without compromising sensitivity. Moreover, this C-MRS biosensor could distinguish 0.01% target DNA from the single-base mutant. Recovery in eggs, milk and pork ranged from 75% to 112%, 82%-104%, and 81%-91%, respectively, revealing its satisfactory accuracy and applicability in the complex food matrix. The developed C-MRS biosensor fleshes out the CRISPR toolbox for food safety and provides a new approach for the sensitive and accurate detection of foodborne drug-resistant bacteria.

Colorimetric and photothermal dual-mode lateral flow immunoassay based on Au-Fe3O4 multifunctional nanoparticles for detection of Salmonella typhimurium

Au-Fe₃O₄ multifunctional nanoparticles (NPs) were synthesized and integrated with lateral flow immunoassay (LFIA) for dual-mode detection of Salmonella typhimurium. The Au-Fe₃O₄ NPs not only combined excellent local surface plasmon resonance characteristics and superparamagnetic properties, but also exhibited good photothermal effect. In the detection, antibody-conjugated Au-Fe₃O₄ NPs first captured S. typhimurium from complex matrix, which was then loaded on the LFIA strip and trapped by the T-line. By observing the color bands with the naked eyes, qualitative detection was performed free of instrument. By measuring the photothermal signal, quantification was achieved with a portable infrared thermal camera. The introduction of magnetic separation achieved the enrichment and purification of target bacteria, thus enhancing the detection sensitivity and reducing interference. This dual-mode LFIA achieved a visual detection limit of 5 × 10⁵ CFU/mL and a photothermal detection limit of 5 × 10⁴ CFU/mL. Compared with traditional Au-based LFIA, this dual-mode LFIA increased the detection sensitivity by 2 orders of magnitude and could be directly applied to unprocessed milk sample. Besides, this dual-mode LFIA showed good reproducibility and specificity. The intra-assay and inter-assay variation coefficients were 3.0% and 7.9%, and with this dual-mode LFIA, other bacteria hardly produced distinguishable signals. Thus, the Au-Fe₃O₄ NPs-based LFIA has potential to increase the efficiency of pandemic prevention and control. Au-Fe₃O₄ nanoparticle proved to be a promising alternative reporter for LFIA, achieving multifunctions: target purification, target enrichment, visual qualitation, and instrumental quantification, which improved the limitations of traditional LFIA.

Optical Biosensor for Ochratoxin A Detection in Grains Using an Enzyme-Mediated Click Reaction and Polystyrene Nanoparticles

Herein, we develop an optical biosensor for highly sensitive and facile detection of ochratoxin A (OTA) using an enzyme-mediated click reaction for signal amplification and polystyrene nanoparticles (PNPs) for signal readout. Alkaline phosphatase was employed to hydrolyze the ascorbic acid-phosphate to generate ascorbic acid, which reduces Cu(II) to Cu(I). Cu(I) can catalyze the click reaction between alkyne-functionalized magnetic beads and azide-functionalized PNPs to form complexes, while unbound PNPs acted as the signal probe. This strategy utilized the high efficiency of click chemistry and the inherent optical absorption properties of PNPs, which effectively improved the sensitivity of conventional immunoassays and simplified the procedures using magnetic separation technology. This optical biosensor enabled OTA detection in a linear range of 0.1 to 50 ng/mL with a detection limit of 54 pg/mL. Moreover, it has been successfully challenged with OTA detection in maize samples, revealing its potential as a promising tool for mycotoxin screening.

Enzyme-modulated photothermal immunoassay of chloramphenicol residues in milk and egg using a self-calibrated thermal imager

Highly sensitive and accurate detection of chloramphenicol is of paramount importance for food safety. Herein, an enzyme-modulated photothermal immunosensor that uses a self-calibrated thermal imaging system (SCTIS) as signal read-out was developed for detecting chloramphenicol. In this immunosensor, alkaline phosphatase was used as a modulator of the photothermal conversion. It could hydrolyze the substrate into ascorbic acid, thereby reducing oxidized 3,3',5,5'-tetramethylbenzidine, which exhibited a near-infrared laser-driven photothermal effect. For precise temperature measurement, the SCTIS was designed by using the temperature compensation of a ceramic chip to enable real-time self-calibration of the temperature. This SCTIS-based immunosensor could detect chloramphenicol with a LOD of 9 pg/mL in 2 h, and relative standard derivations from 3.95% to 13.58%. The average recoveries in milk and egg samples ranged from 76% to 114%. This versatile sensing strategy can detect various targets by altering recognition elements, thus has wide applicability in food safety testing and monitoring.

An Automated and Highly Sensitive Chemiluminescence Immunoassay for Diagnosing Mushroom Poisoning

Mushrooms containing Amanita peptide toxins are the major cause of mushroom poisoning, and lead to approximately 90% of deaths. Phallotoxins are the fastest toxin causing poisoning among Amanita peptide toxins. Thus, it is imperative to construct a highly sensitive quantification method for the rapid diagnosis of mushroom poisoning. In this study, we established a highly sensitive and automated magnetic bead (MB)-based chemiluminescence immunoassay (CLIA) for the early, rapid diagnosis of mushroom poisoning. The limits of detection (LODs) for phallotoxins were 0.010 ng/ml in human serum and 0.009 ng/ml in human urine. Recoveries ranged from 81.6 to 95.6% with a coefficient of variation <12.9%. Analysis of Amanita phalloides samples by the automated MB-based CLIA was in accordance with that of HPLC-MS/MS. The advantages the MB-based CLIA, high sensitivity, repeatability, and stability, were due to the use of MBs as immune carriers, chemiluminescence as a detection signal, and an integrated device to automate the whole process. Therefore, the proposed automated MB-based CLIA is a promising option for the early and rapid clinical diagnosis of mushroom poisoning.

A bio-inspired plasmonic nanosensor for angiotensin-converting enzyme through peptide-mediated assembly of gold nanoparticles

Angiotensin-converting enzyme (ACE) can indicate blood pressure that relates to human health such as the cardiovascular disease. However, current methods are not competent to detect the ACE activity in a rapid and straightforward way. Plasmonic biosensors built on the modulation of metallic nanomaterials have emerged as novel tools for the detection of biomarkers. In this work, we report a bio-inspired strategy for the plasmonic detection of ACE in a rapid, sensitive, and selective way through peptide-mediated assembly of gold nanoparticles (AuNPs). In this biosensor, cysteine-angiotensin I-cysteine can assemble and aggregate AuNPs due to the Au-S bond. The presence of ACE can specifically catalyze the hydrolysis of angiotensin I, thus dissociating the cysteine-cysteine structure of the peptide that results in the disassembly and dispersion of AuNPs. This bio-inspired plasmonic nanosensor enables naked-eyed readout of ACE detection with great selectivity and high sensitivity with a LOD of 0.40 mU/mL. It also allows for the screening of ACE inhibitors and inhibitory peptides for the development of antihypertensive drugs or food. The biosensing technique developed in this work provides a new plasmonic approach that holds great promise as a point-of-care platform for biomedical diagnostics and the food industry.

A lab-on-a-tube biosensor for automatic detection of foodborne bacteria using rotated Halbach magnetic separation and Raspberry Pi imaging

A lab-on-a-tube biosensor was established to rapidly, sensitively and automatically detect foodborne bacteria through a rotatable Halbach magnet to form and rotate magnetic nanobead (MNB) chains for specific isolation of target bacteria, gold@platinum nanocatalysts (Au@PtNCs) to label target bacteria for efficient amplification of detection signal and Raspberry Pi App to collect and analyze the image of catalysate. First, the glass tube was successively preloaded with the mixture of MNBs, sample and Au@PtNCs, the washing buffer (skim milk) and the substrate (hydrogen peroxide-3,30,5,50-tetramethylbenzidine), and they were separated by air gaps. After the tube was placed on the biosensor, the MNB chains were stably formed and continuously rotated using the Halbach magnet and the mixture was moved back and forth using a programmable peristaltic pump, thus making the formation of MNB-bacteria-Au@PtNCs complexes. After the washing buffer was moved to wash the complexes, the substrate was then moved to resuspend the complexes, resulting in the catalytic reaction that changed the color of the substrate. Finally, the catalysate was moved to the designated area, the image of which was analyzed by the Raspberry Pi App to quantitatively determine the concentration of bacteria in the samples. This biosensor was able to detect Salmonella in spiked chicken samples in 1 h with lower detection limit of 8 CFU/50 μL and a recovery from 88.96% to 99.74%. This biosensor based on a single tube is very promising to automatically detect foodborne bacteria due to its low cost, high integration and simple operation.

Highly sensitive magnetic relaxation sensing method for aflatoxin B1 detection based on Au NP-assisted triple self-assembly cascade signal amplification

Highly sensitive detection of aflatoxin B₁ (AFB₁) is of great significance because of its high toxicity and carcinogenesis. We propose a magnetic relaxation sensing method based on gold nanoparticles (Au NPs)-assisted triple self-assembly cascade signal amplification for highly sensitive detection of AFB₁. Both AFB₁ antibody and initiator DNA (iDNA) are labeled on Au NPs to form Ab-Au-iDNA probe. iDNA is enriched by Au NPs to achieve first signal amplification. Different amounts of Ab-Au-iDNA were bound with AFB₁ antigen by indirect competitive immunoassay, and then hybridization chain reaction event was initiated by iDNA to produce long hybridization chain reaction products to enrich more horseradish peroxidase-streptavidin for the second signal amplification. Dopamine could be rapidly converted to polydopamine by HRP catalysis, which is used as the third signal amplification. The Fe³⁺ solution, providing paramagnetic ions with a strong magnetic signal, could be adsorbed by the polydopamine due to the formation of coordination bonds of phenolic hydroxyl groups with Fe³⁺. This effective interaction between polydopamine and Fe³⁺ significantly changes the transverse relaxation time signal of Fe³⁺ supernatant solution, which can be used as a magnetic probe for highly sensitive detection of AFB₁. The sensor exhibited high specificity and sensitivity with a detection limit of 0.453 pg/mL owing to the Au NP-assisted triple self-assembly cascade signal amplification strategy. It has been successfully employed for AFB₁ detection in animal feed samples with consistent results of enzyme linked immune sorbent assay and high-performance liquid chromatography.

Overview of Rapid Detection Methods for Salmonella in Foods: Progress and Challenges

Salmonella contamination in food production and processing is a serious threat to consumer health. More and more rapid detection methods have been proposed to compensate for the inefficiency of traditional bacterial cultures to suppress the high prevalence of Salmonella more efficiently. The contamination of Salmonella in foods can be identified by recognition elements and screened using rapid detection methods with different measurable signals (optical, electrical, etc.). Therefore, the different signal transduction mechanisms and Salmonella recognition elements are the key of the sensitivity, accuracy and specificity for the rapid detection methods. In this review, the bioreceptors for Salmonella were firstly summarized and described, then the current promising Salmonella rapid detection methods in foodstuffs with different signal transduction were objectively summarized and evaluated. Moreover, the challenges faced by these methods in practical monitoring and the development prospect were also emphasized to shed light on a new perspective for the Salmonella rapid detection methods applications.

Horseradish peroxidase-catalyzed formation of polydopamine for ultra-sensitive magnetic relaxation sensing of aflatoxin B1

Aflatoxin B₁ as one of the most toxic mycotoxins poses a major health risk to humans and animals. Highly sensitive detection methods of aflatoxin B₁ are urgently required because of its low abundance in biological samples. In this work, we developed a magnetic relaxation sensing strategy using enzyme-catalyzed formation of polydopamine for signal amplification. Horseradish peroxidase can catalyze the reaction to generate polydopamine that assembles magnetic nanoparticles for magnetic relaxation sensing with a high signal-to-noise ratio. Combined with the specific antigen-antibody interaction, this magnetic sensor enables fast and ultra-sensitive detection of aflatoxin B₁ by using transverse relaxation time (T₂) as a readout. Under optimized conditions, the linear range of this magnetic sensor for detecting aflatoxin B₁ is from 10 pg/mL to 10 ng/mL, and the limit of detection is 0.35 pg/mL. This sensor has been challenged for the quantitative analysis of aflatoxin B₁ in animal feed samples that is promising for real-world applications.

Direct Transverse Relaxation Time Biosensing Strategy for Detecting Foodborne Pathogens through Enzyme-Mediated Sol-Gel Transition of Hydrogels

In this work, we develop a direct transverse relaxation time (T₂) biosensing strategy and employ it for assaying foodborne pathogens relying on the alkaline phosphatase (ALP)-mediated sol-gel transition of hydrogels. ALP can catalyze the reaction to generate an acidic environment to transform the sol-state alginate solution to hydrogel, and this hydrogelation process can directly regulate the diffusion rate of water protons that results in a T₂ change of water molecules. By means of enzyme-modulated sol-gel transition and antigen-antibody interactions, this T₂ biosensor displays high sensitivity for detecting 50 CFU/mL S. enteritidis within 2 h. This biosensing strategy directly modulates the water molecules rather than magnetic probes in traditional methods, offering a straightforward, novel, and sensitive platform for pathogen detection.

Versatile Biosensing Toolkit Using an Electronic Particle Counter

Development of a versatile biosensing toolkit is in urgent need for rapid and multiplexed detection applications. In this work, an electronic particle counter-implemented versatile biosensing toolkit has been developed for detecting a range of targets with high sensitivity, broad detection range, multiplexibility, simple operation, and low cost. The electrical resistance-based particle counter conventionally measuring the number of microspheres (1-100 μm) can quantify analytes. The versatility of this approach is verified by assaying small molecules, protein biomarkers, pathogen bacteria, and tumor cells using three strategies: (1) antigen-antibody interaction, (2) DNA hybridization, and (3) polypeptide recognition. More importantly, this biosensing toolkit allows the simultaneous detection of multiple targets with a broad detection range from pg mL^-1 to μg mL^-1, showing great potential as a powerful technique for food safety testing and biomedical diagnosis.

Double-enzymes-mediated Fe2+/Fe3+ conversion as magnetic relaxation switch for pesticide residues sensing

It is a great challenge to develop a newly rapid and accurate detection method for pesticide residues. In this work, based on acetylcholinesterase (AChE) and choline oxidase (CHO), a double-enzymes-mediated Fe²⁺/Fe³⁺ conversion as magnetic relaxation switch was explored for the measurement of acetamiprid residue. In the double-enzymes reactions, acetylcholine chloride (ACh) can be catalyzed to produce choline by AChE, which is successively hydrolyzed to betaine and hydrogen peroxide (H₂O₂) by CHO. According to the enzyme inhibition principle, AChE activity will be inactivated in the presence of acetamiprid, thus leading to the less production of H₂O₂. Wherein, Fe²⁺, ACh, AChE and CHO were optimized as the reaction substrates. In the reaction system, acetamiprid can be reflected by the transverse relaxation time (T₂) that related with H₂O₂ mediated Fe²⁺ variations, which was further developed as an enzyme cascade amplification method. The detection linear range is 0.01∼1000 μg mL^-1 (R² = 0.99), and the limit of detection (LOD) is 2.66 ng mL^-1 (S/N = 3, n = 3), behaving a 335-fold improvement in LOD than that of traditional enzyme inhibition method (0.89 μg mL^-1). This method can realize "one-step mixing" detection of acetamiprid, which makes it a promising analytical tool for monitoring pesticide residue in complicated samples.

Biosensors for rapid detection of Salmonella in food: A review

Salmonella is one of the main causes of foodborne infectious diseases, posing a serious threat to public health. It can enter the food supply chain at various stages of production, processing, distribution, and marketing. High prevalence of Salmonella necessitates efficient and effective approaches for its identification, detection, and monitoring at an early stage. Because conventional methods based on plate counting and real-time polymerase chain reaction are time-consuming and laborious, novel rapid detection methods are urgently needed for in-field and on-line applications. Biosensors provide many advantages over conventional laboratory assays in terms of sensitivity, specificity, and accuracy, and show superiority in rapid response and potential portability. They are now recognized as promising alternative tools and one of the most on-site applicable and end user-accessible methods for rapid detection. In recent years, we have witnessed a flourishing of studies in the development of robust and elaborate biosensors for detection of Salmonella in food. This review aims to provide a comprehensive overview on Salmonella biosensors by highlighting different signal-transducing mechanisms (optical, electrochemical, piezoelectric, etc.) and critically analyzing its recent trends, particularly in combination with nanomaterials, microfluidics, portable instruments, and smartphones. Furthermore, current challenges are emphasized and future perspectives are discussed.

Ultrasensitive determination of ractopamine based on dual catalytic signal amplification by Pd nanocubes and HRP using a flow injection chemiluminescence immunoassay

A rapid and highly sensitive flow injection chemiluminescence immunoassay was developed to detect ractopamine residues in pork products. Palladium nanocubes with excellent catalytic performance for a traditional luminol-PIP-H2O2 chemiluminescence system were used as effective carriers to connect a ractopamine antibody and horseradish peroxidase (HRP). Double amplification of a chemiluminescence signal was realized because of palladium nanocubes and HRP. Carboxyl-modified resin beads were used as suitable materials to load ractopamine-coating antigens due to their good biocompatibility and large specific surface area. Based on the principle of competitive immunity, ractopamine standard solution would compete with antigen loaded on carboxyl resin beads for limited binding sites on a ractopamine antibody. Thus, the chemiluminescence intensity of an immunosensor has a linear negative correlation with the logarithm value of ractopamine concentration. Under optimal experimental conditions, the detection range of ractopamine was 0.005-1000 ng mL-1, and the limit of detection (LOD) was 1.7 pg mL-1 (S/N = 3). The proposed immunoassay possessed acceptable accuracy, high specificity and reproducibility and RAC was examined in pork and pig feed with satisfactory results, which would provide a better prospect for the detection of small molecules in food and environment analysis.

One-step and DNA amplification-free detection of Listeria monocytogenes in ham samples: Combining magnetic relaxation switching and DNA hybridization reaction

Early screening of L. monocytogenes in ready-to-eat food can prevent and control its harmful effects. In this study, we propose a highly sensitive magnetic DNA sensor based on nucleic acid hybridization reaction and magnetic signal readout. We design the L. monocytogenes specific probe₁ and probe₂ and label them on the 30 and 250 nm magnetic nanoparticles, respectively. The hybridization reaction between the magnetic probes and DNA of L. monocytogenes could form a sandwich nanocomplex. After magnetic separation, the unbound MNP₃₀-probe₂ can act as the transverse relaxation time (T₂) signal readout probe. This assay allows the one-step detection of L. monocytogenes as low as 50 CFU/mL within 2 h without DNA amplification, and the average recovery in the spiked ham sausage samples can reach 92.6%. This system integrates the high sensitivity of magnetic sensing and high efficiency of hybridization reaction, providing a promising detection platform for pathogens.