Chemiresistive Carbon Nanotube Sensors for N-Nitrosodialkylamines

Real-time monitoring of aqueous total N-nitrosamines by UV photolysis and chemiluminescence

N-nitrosamines such as N-nitrosodimethylamine (NDMA), N-nitrosodiethylamine (NDEA), N-nitrosopiperidine (NPIP), and N-nitrosopyrrolidine (NPYR) have been established as potent carcinogens that can induce diverse types of cancer. Several studies have extensively investigated the accurate quantification of total N-nitrosamines (TONO) and the intricate nature of the matrix in which they are detected. The potential for the formation of N-nitrosamines in post-combustion CO2 capture (PCCC) and water treatment has raised concerns. This study outlines a unique method for the quantification of TONO in aqueous matrices using UV photolysis and the subsequent detection of NO by chemiluminescence. This method offers benefits such as operation in the continuous mode and handling of high sample flow rates to achieve a low limit of detection (LOD) and a low limit of quantification (LOQ). The observed LODs for the individual N-nitrosamines of NDMA, N-nitrosomorpholine (NMOR), N-nitrosodibutylamine (NDBA), and NPIP range between 0.06 and 0.2 µM at a sample flow rate of 0.25 mL/min, while the LOD range is reduced to between 0.02 and 0.06 µM at 0.75 mL/min. Linear responses for the NO produced from specific N-nitrosamines are observed between 0.5 and 10 µM. The developed method is resistant to interfering chemicals (i.e., nitrite, amines, and carbonyls) and exhibits high specificity.

Colorimetric Detection of Aqueous N-Nitrosodimethylamine via Photonitrosation of a Naphtholsulfonate Indicator

N-Nitrosamines are contaminants found throughout the environment, including in drinking water, and many nitrosamines are likely potent carcinogens. Correspondingly, there is a need for rapid and cost-effective in-field detection methods that can provide timely information about their contamination levels in water. This study details a colorimetric assay for detecting aqueous N-nitrosodimethylamine (NDMA) by photochemical nitrosation of a commercial naphtholsulfonate, to offer an attractive alternative to traditional laboratory-based analysis. The resulting naphthoquinone-oxime coordinates to aqueous iron(II) ions to form a green complex, allowing for direct visual detection. Characterization via Mössbauer and electron paramagnetic resonance (EPR) spectroscopy, alongside single-crystal structure determination, provides comprehensive structure information on the iron indicator complex. Optimization of detection conditions, including UV irradiation and response times, led to an improved colorimetric detection method with a limit of detection of 0.66 ppm for NDMA. The practical applicability and selectivity of this colorimetric detection scheme make it a promising candidate for the development of field-deployable sensors for NDMA in environmental water samples.

An innovative solid-phase biosensor for rapid on-site detection of N-nitrosodimethylamine incorporating zein film and upconversion nanoparticles

Pickled frequently contains nitrosodimethylamine (NDMA), a mutagenic and carcinogenic substance that is dangerous for the general public's health. This study reports on the fabrication of a fluorescent biosensor using zein film and aptamer functionalized upconversion nanoparticles (UCNPs) for on-site monitoring of NDMA in meat. UCNPs were first prepared followed by aptamer binding and mixing with zein film, which was further conjugated with cDNA of dabcyl modified at 5'. The fluorescence resonance energy transfer (FRET) mechanism between the UCNPs and dabcyl was exploited. The fluorescence signals of the zein film recovered when NDMA was present because it was selectively collected by the particular aptamer and damaged the cDNA structure. The designed functionalized zein film was used for on-site and portable determination of NDMA with a lower limit of detection of 0.017 ng/mL, and possessed a satisfactory recovery ranging from 95.8% to 100.2% with no significant difference compared with the GC-MS method.

Nanomaterials-based biosensor and their applications: A review

A sensor can be called ideal or perfect if it is enriched with certain characteristics viz., superior detections range, high sensitivity, selectivity, resolution, reproducibility, repeatability, and response time with good flow. Recently, biosensors made of nanoparticles (NPs) have gained very high popularity due to their excellent applications in nearly all the fields of science and technology. The use of NPs in the biosensor is usually done to fill the gap between the converter and the bioreceptor, which is at the nanoscale. Simultaneously the uses of NPs and electrochemical techniques have led to the emergence of biosensors with high sensitivity and decomposition power. This review summarizes the development of biosensors made of NPssuch as noble metal NPs and metal oxide NPs, nanowires (NWs), nanorods (NRs), carbon nanotubes (CNTs), quantum dots (QDs), and dendrimers and their recent advancement in biosensing technology with the expansion of nanotechnology.

Molecular origins of mutational spectra produced by the environmental carcinogen N-nitrosodimethylamine and SN1 chemotherapeutic agents

DNA-methylating environmental carcinogens such as N-nitrosodimethylamine (NDMA) and certain alkylators used in chemotherapy form O 6-methylguanine (m6G) as a functionally critical intermediate. NDMA is a multi-organ carcinogen found in contaminated water, polluted air, preserved foods, tobacco products, and many pharmaceuticals. Only ten weeks after exposure to NDMA, neonatally-treated mice experienced elevated mutation frequencies in liver, lung and kidney of ∼35-fold, 4-fold and 2-fold, respectively. High-resolution mutational spectra (HRMS) of liver and lung revealed distinctive patterns dominated by GC→AT mutations in 5'-Pu-G-3' contexts, very similar to human COSMIC mutational signature SBS11. Commonly associated with alkylation damage, SBS11 appears in cancers treated with the DNA alkylator temozolomide (TMZ). When cells derived from the mice were treated with TMZ, N-methyl-N-nitrosourea, and streptozotocin (two other therapeutic methylating agents), all displayed NDMA-like HRMS, indicating mechanistically convergent mutational processes. The role of m6G in shaping the mutational spectrum of NDMA was probed by removing MGMT, the main cellular defense against m6G. MGMT-deficient mice displayed a strikingly enhanced mutant frequency, but identical HRMS, indicating that the mutational properties of these alkylators is likely owed to sequence-specific DNA binding. In sum, the HRMS of m6G-forming agents constitute an early-onset biomarker of exposure to DNA methylating carcinogens and drugs.

Does the Red Shift in UV-Vis Spectra Really Provide a Sensing Option for Detection of N-Nitrosamines Using Metalloporphyrins?

N-nitrosamines are widespread cancerogenic compounds in human environment, including water, tobacco products, food, and medicinal products. Their presence in pharmaceuticals has recently led to several recalls of important medicines from the market, and strict controls and tight limits of N-nitrosamines are now required. Analytical determination of N-nitrosamines is expensive, laborious, and time-inefficient making development of simpler and faster techniques for their detection crucial. Several reports published in the previous decade have demonstrated that cobalt porphyrin-based chemosensors selectively bind N-nitrosamines, which produces a red shift of characteristic Soret band in UV-Vis spectra. In this study, a thorough re-evaluation of metalloporphyrin/N-nitrosamine adducts was performed using various characterization methods. Herein, we demonstrate that while N-nitrosamines can interact directly with cobalt-based porphyrin complexes, the red shift in UV-Vis spectra is not selectively assured and might also result from the interaction between impurities in N-nitrosamines and porphyrin skeleton or interaction of other functional groups within the N-nitrosamine structure and the metal ion within the porphyrin. We show that pyridine nitrogen is the interacting atom in tobacco-specific N-nitrosamines (TSNAs), as pyridine itself is an active ligand and not the N-nitrosamine moiety. When using Co(II) porphyrins as chemosensors, acidic and basic impurities in dialkyl N-nitrosamines (e.g., formic acid, dimethylamine) are also UV-Vis spectra red shift-producing species. Treatment of these N-nitrosamines with K₂CO₃ prevents the observed UV-Vis phenomena. These results imply that cobalt-based metalloporphyrins cannot be considered as selective chemosensors for UV-Vis detection of N-nitrosamine moiety-containing species. Therefore, special caution in interpretation of UV-Vis red shift for chemical sensors is suggested.

Stretchable and Highly Sensitive Strain Sensor Based on a 2D MXene and 1D Whisker Carbon Nanotube Binary Composite Film

We fabricate a 2D MXene and 1D whisker carbon nanotube (WCNT) binary composite, where the MXene layer was sandwiched between two WCNT films, and assemble a flexible resistive-type strain sensor using this composite film. The deformations of the conductive networks trigged by the external mechanical stimuli cause the variations of the number of effective conductive paths, which result in the changes of the electric resistance of composite films. The resistances of the MXene/WCNT composite films that carry the strain information about the external mechanical stimuli are monitored. In addition, we demonstrate the role of the conductive MXene networks and the WCNT networks in responding to the external mechanical stimuli. The MXene networks dominate the variations of the resistance of the strain sensors in the low strain range. In the middle strain range, the deformations of both the MXene networks and the WCNT networks are responsible for the variations of the resistance of the strain sensors. In the high strain range, an "island bridge" like conductive network forms, where MXenes act as islands and WCNTs connect the adjacent MXene islands like bridges. The multiple types of conductive networks lead to the high sensitivity of the MXene/WCNT-based strain sensors over a wide strain range and a wide response window. This stretchable strain sensor exhibits good performances in detecting human muscle motions with a wide strain range and has the potentials of being applicable to wearable electronics.

Preparation of flower-like molybdenum disulfide for solid-phase extraction of N-nitrosoamines in environmental water samples

In this paper, a flower-like molybdenum disulfide material was prepared by hydrothermal method and was first used as adsorbents in the solid-phase extraction process for enriching N-nitrosoamines. Molybdenum disulfide exhibited three-dimensional petal-like microspheres with about 500 nm in diameter. The relevant analyte extraction and elution parameters (sample volumes, solution pH, washing solvents, elution solvents, and elution volumes) were optimized to improve the solid-phase extraction efficiency. The solid-phase extraction process coupled with high-performance liquid chromatography-tandem mass spectrometry for determining N-nitrosoamines in environmental water samples was established. The limits of detection were in the range of 0.01-0.05 ng/mL. The satisfactory recoveries (68.9-106.1%) were obtained at three different spiked concentrations (2, 5, and 8 ng/mL) in water samples, and the relative standard deviations were between 1.96 and 8.38%. This proposed method not only showed high sensitivity and good reusability but also provided a new adsorbent for enriching trace N-nitrosoamines in environmental water samples.

Metallocalix[4]arene Polymers for Gravimetric Detection of N-Nitrosodialkylamines

N-Nitrosamines are found in food, drugs, air, water, and soil. They pose a significant risk to human health because of their carcinogenicity; consequently, materials that can be used to selectively and sensitively detect nitrosamines are needed. In this work, we designed and synthesized two polymers bearing calix[4]arene or 4-tert-butylcalix[4]arene tungsten-imido complexes (PCalixH and PCalixtBu) as N-nitrosodimethylamine (NDMA) receptors. The interaction between metallocalix[4]arene monomers/polymers and NDMA was confirmed by ¹H NMR and IR spectroscopy. Single-crystal X-ray analysis further revealed that the host-guest interaction is based on binding of the terminal oxygen of NDMA to tungsten within the calixarene cavity. Gravimetric detection of NDMA was performed on a quartz crystal microbalance (QCM) in air. Both polymers show responses to NDMA, with PCalixtBu exhibiting a low theoretical limit of detection of 5 ppb for NDMA. The sensor also shows high selectivity toward NDMA and moderate humidity tolerance. This work provides a sensitive sensor for detection of NDMA and also offers a class of new, selective, and efficient NDMA receptors for the future design of NDMA sensors and NDMA extraction materials.

Applications of Carbon Nanotubes in the Internet of Things Era

The post-Moore's era has boosted the progress in carbon nanotube-based transistors. Indeed, the 5G communication and cloud computing stimulate the research in applications of carbon nanotubes in electronic devices. In this perspective, we deliver the readers with the latest trends in carbon nanotube research, including high-frequency transistors, biomedical sensors and actuators, brain-machine interfaces, and flexible logic devices and energy storages. Future opportunities are given for calling on scientists and engineers into the emerging topics.

Implications of an epidemiological study showing an association between in utero NDMA exposure and childhood cancer

Exposure to N-nitrosodimethylamine (NDMA) has recently been linked to a childhood cancer cluster in Wilmington, MA, which is home to the Olin Chemical Superfund Site. When it was discovered in the 1990's that 22 children in a town of under 22,000 people got cancer, the community took action and pressed for an investigation into the possibility that chemicals from the Olin Chemical site had contaminated their water. This led to the eventual discovery that NDMA was present in the town water supply. NDMA has long been known for its potent carcinogenicity in animal models, and so the community pointed to NDMA as a possible cause. This led to an investigation by the Massachusetts Department of Public Health, which, in 2021, released its findings showing an association between NDMA exposure in utero and childhood cancer. The mission of the NIEHS Superfund Research Program is to protect human health from hazardous substances. In 2017, in response to community concerns, a team at MIT created the MIT Superfund Research Program Center with a focus on research related to NDMA. Just 1 week prior to the release of the Department of Public Health study, the MIT Superfund Research Program Center published a manuscript in Cell Reports that identifies the Alkyladenine DNA glycosylase (AAG) as a possible genetic susceptibility factor. This commentary provides an author's perspective on the context and implications of this and related research.

Recent Advances in Chemical Sensors Using Porphyrin-Carbon Nanostructure Hybrid Materials

Porphyrins and carbon nanomaterials are among the most widely investigated and applied compounds, both offering multiple options to modulate their optical, electronic and magnetic properties by easy and well-established synthetic manipulations. Individually, they play a leading role in the development of efficient and robust chemical sensors, where they detect a plethora of analytes of practical relevance. But even more interesting, the merging of the peculiar features of these single components into hybrid nanostructures results in novel materials with amplified sensing properties exploitable in different application fields, covering the areas of health, food, environment and so on. In this contribution, we focused on recent examples reported in literature illustrating the integration of different carbon materials (i.e., graphene, nanotubes and carbon dots) and (metallo)porphyrins in heterostructures exploited in chemical sensors operating in liquid as well as gaseous phase, with particular focus on research performed in the last four years.

Excision of mutagenic replication-blocking lesions suppresses cancer but promotes cytotoxicity and lethality in nitrosamine-exposed mice

N-Nitrosodimethylamine (NDMA) is a DNA-methylating agent that has been discovered to contaminate water, food, and drugs. The alkyladenine DNA glycosylase (AAG) removes methylated bases to initiate the base excision repair (BER) pathway. To understand how gene-environment interactions impact disease susceptibility, we study Aag-knockout (Aag-/-) and Aag-overexpressing mice that harbor increased levels of either replication-blocking lesions (3-methyladenine [3MeA]) or strand breaks (BER intermediates), respectively. Remarkably, the disease outcome switches from cancer to lethality simply by changing AAG levels. To understand the underlying basis for this observation, we integrate a suite of molecular, cellular, and physiological analyses. We find that unrepaired 3MeA is somewhat toxic, but highly mutagenic (promoting cancer), whereas excess strand breaks are poorly mutagenic and highly toxic (suppressing cancer and promoting lethality). We demonstrate that the levels of a single DNA repair protein tip the balance between blocks and breaks and thus dictate the disease consequences of DNA damage.

Nanoarchitectured porous carbons derived from ZIFs toward highly sensitive and selective QCM sensor for hazardous aromatic vapors

Metal-organic frameworks (MOFs) are a versatile source of carbon nanoarchitectures in gas sensing applications (Torad et al., 2019). Herein, several types of nanoporous carbons (NPCs) have been prepared by in-situ carbothermal treatment of zeolitic imidazolate frameworks (ZIFs) under different inert atmospheres to achieve a highly sensitive discrimination of vaporized aromatic compounds. In this study, we demonstrate how different carbonization conditions under the flow of N₂ or H₂ gases affect the surface area and the degree of graphitization of the resulting NPCs polyhedrons, and their consequent effect on the sensing performance in terms of sensitivity and selectivity toward toxic volatile hydrocarbons. A growth of carbon nanotubes (CNTs) is observed on the surface of polyhedral NPCs after careful carbonization of ZIF crystals under H₂ atmosphere. The fabricated quartz crystal microbalance (QCM) sensor with CNT-containing NPCs demonstrates increased sensitivity and selectivity towards toxic volatile aromatic hydrocarbons over the aliphatic analogues, suggesting the rich growth of hairy graphitic-like CNTs on the surface of carbon framework act as highly selective sensing antennae for vapor molecular discrimination of toxic aromatic hydrocarbons. Despite of increased selectivity towards volatile aromatic compounds, however, the surface area of CNT-rich NPCs derived from hybrid ZIFs and ZIF-67 is greatly sacrificed as compared to CNT-free NPCs from ZIF-8 polyhedron. In the case of Co-containing ZIF-67, the rich growth of hair-like CNTs, which is induced by the presence of Co, is observed during carbothermal reduction under a flow of H₂ gas, thus allowing ultra-selective detection of aromatic hydrocarbons in the vapor phase, such as benzene (C₆H₆) and toluene (C₆H₅CH₃) over their aliphatic analogue, c-hexane (c-C₆H₁₂) of same molecular mass, size and vapor pressure.

An Organic Chemist's Guide to N-Nitrosamines: Their Structure, Reactivity, and Role as Contaminants

N-Nitrosamines are a class of compounds notorious both for the potent carcinogenicity of many of its members and for their widespread occurrence throughout the human environment, from air and water to our diets and drugs. Considerable effort has been dedicated to understanding N-nitrosamines as contaminants, and methods for their prevention, remediation, and detection are ongoing challenges. Understanding the chemistry of N-nitrosamines will be key to addressing these challenges. To facilitate such understanding, we focus in this Perspective on the structure, reactivity, and synthetic applications of N-nitrosamines with an emphasis on alkyl N-nitrosamines. The role of N-nitrosamines as water contaminants and the methods for their detection are also discussed.

Ultrasensitive determination of sulfathiazole using a molecularly imprinted electrochemical sensor with CuS microflowers as an electron transfer probe and Au@COF for signal amplification

In this work, a molecularly imprinted sensor employing copper sulfide (CuS) as a novel signal probe was successfully developed for ultrasensitive and selective determination of sulfathiazole (STZ). The reduction signals of Cu²⁺ produced in the process of electron transfer of CuS containing large amounts of Cu²⁺ are easy to be captured, which provide high electrochemical signals. Moreover, gold nanoparticles@covalent organic framework with excellent conductivity was introduced on the electrode surface for signal amplification and facilitating electron transfer processes of CuS. Under optimized testing conditions, the proposed sensor offered a linear DPV response to STZ over a very wide concentration range (1.0 × 10^-4 to 1.0 × 10^-11 mol L^-1), with a limit of detection of 4.3 × 10^-12 mol L^-1. Fodder and mutton samples spiked with STZ were analyzed using this sensor, and the satisfactory recoveries ranging from 83.0% to 107.2% were obtained. In addition, the proposed sensor was used to determine the concentration of STZ in chicken liver and pork liver, with quantification results being near identical to those determined by high-performance liquid chromatography.