Two-Dimensional, Few-Layer MnPS3 for Selective NO2 Gas Sensing under Ambient Conditions

Visible-Light Self-Powered Photodetector with High Sensitivity Based on the Type-II Heterostructure of CdPSe3/MoS2

Transition metal thiophosphates (MTPs) are a group of emerging van der Waals materials with widely tunable band gaps. In the MTP family, CdPSe3 is demonstrated to possess a wide energy band gap and high carrier mobility, making it a potential candidate in optoelectronic applications. Here, we reported photoelectric response behaviors of both CdPSe3- and CdPSe3/MoS2-based photodetectors (noted as CPS and CM, respectively); these showed prominent photoelectric performances, and the latter proved to be significantly superior to the former. These devices exhibited ultralow dark current at a magnitude order of 10-12 A and fine cycle and air stabilities. Compared with CPS, CM demonstrated the highest responsivity (91.12 mA/W) and detectivity (1.74 × 1011 Jones) at 5 V under 425 nm light illumination. Besides, CM showed self-powered photoelectric responses at zero bias, which was attributed to the improved separation efficiency of photogenerated carriers by the built-in electric field at the interface of the p-n junction. This work proves a prospect for the CM device in portable, self-powered optoelectronic device applications.

Polydopamine-Modified 2D Iron (II) Immobilized MnPS3 Nanosheets for Multimodal Imaging-Guided Cancer Synergistic Photothermal-Chemodynamic Therapy

Manganese phosphosulphide (MnPS3 ), a newly emerged and promising member of the 2D metal phosphorus trichalcogenides (MPX3 ) family, has aroused abundant interest due to its unique physicochemical properties and applications in energy storage and conversion. However, its potential in the field of biomedicine, particularly as a nanotherapeutic platform for cancer therapy, has remained largely unexplored. Herein, a 2D "all-in-one" theranostic nanoplatform based on MnPS3 is designed and applied for imaging-guided synergistic photothermal-chemodynamic therapy. (Iron) Fe (II) ions are immobilized on the surface of MnPS3 nanosheets to facilitate effective chemodynamic therapy (CDT). Upon surface modification with polydopamine (PDA) and polyethylene glycol (PEG), the obtained Fe-MnPS3 /PDA-PEG nanosheets exhibit exceptional photothermal conversion efficiency (η = 40.7%) and proficient pH/NIR-responsive Fenton catalytic activity, enabling efficient photothermal therapy (PTT) and CDT. Importantly, such nanoplatform can also serve as an efficient theranostic agent for multimodal imaging, facilitating real-time monitoring and guidance of the therapeutic process. After fulfilling the therapeutic functions, the Fe-MnPS3 /PDA-PEG nanosheets can be efficiently excreted from the body, alleviating the concerns of long-term retention and potential toxicity. This work presents an effective, precise, and safe 2D "all-in-one" theranostic nanoplatform based on MnPS3 for high-efficiency tumor-specific theranostics.

Delaminated MnPS3 with Multiple Layers Coupled with Si Featuring Ultrahigh Detectivity and Environmental Stability for UV Photodetection

Silicon (Si), the dominant semiconductor in microelectronics yet lacking optoelectronic functionalities in UV regions, has been researched extensively to make revolutionary changes. In this study, the inherent drawback of Si on optoelectronic functionalities in UV regions is potentially overcome through heterostructure coupling of delaminated p-type MnPS3, having bulk, multiple-layer, and few-layer features, with n-type Si. By artificially mimicking the architectures of shrubs with unique UV shading phenomena, the revolutionary multiple-layer MnPS3 structures with staggered stacking configurations trigger outstanding UV photosensing performances, displaying an average EQE value of 1.1 × 103%, average photoresponsivity of 3.1 × 102 A/W, average detectivity of 1.9 × 1014 cm Hz1/2W1-, and average on/off ratio of 1.8 × 103 under 365 nm light. To the best of our knowledge, this is the first attempt toward realizing gate-free MnPS3-based UV photodetectors, while all of the photodetection outcomes are better than those of more sophisticated field-effect transistor (FET) designs, which have remarkable impacts on the practicality and functionality of next-generation UV optoelectronics.

Femtosecond Laser-Driven Phase Engineering of WS2 for Nano-Periodic Phase Patterning and Sub-ppm Ammonia Gas Sensing

Laser-driven phase transition of 2D transition metal dichalcogenides has attracted much attention due to its high flexibility and rapidity. However, there are some limitations during the laser irradiation process, especially the unsatisfied surface ablation, the inability of nanoscale phase patterning, and the unexploited physical properties of new phase. In this work, the well-controlled femtosecond (fs) laser-driven transformation from the metallic 2M-WS2 to the semiconducting 2H-WS2 is reported, which is confirmed to be a single-crystal to single-crystal transition without layer thinning or obvious ablation. Moreover, a highly ordered 2H/2M nano-periodic phase transition with a resolution of ≈435 nm is achieved, breaking through the existing size bottleneck of laser-driven phase transition, which is attributed to the selective deposition of plasmon energy induced by fs laser. It is also demonstrated that the achieved 2H-WS2 after laser irradiation contains rich sulfur vacancies, which exhibits highly competitive ammonia gas sensing performance, with a detection limit below 0.1 ppm and a fast response/recovery time of 43/67 s at room temperature. This study provides a new strategy for the preparation of the phase-selective transition homojunction and high-performance applications in electronics.

Machine-learning-accelerated screening of single metal atoms anchored on MnPS3 monolayers as promising bifunctional oxygen electrocatalysts

Searching for bifunctional oxygen electrocatalysts with good catalytic performance to promote the oxygen evolution/reduction reactions (OER/ORR) is of great significance to the development of sustainable and renewable clean energy. Herein, we performed density functional theory (DFT) and machine-learning (DFT-ML) hybrid computations to investigate the potential of a series of single transition metal atoms anchored on the experimentally available MnPS₃ monolayer (TM/MnPS₃) as the bifunctional electrocatalysts for the ORR/OER. The results revealed that the interactions of these metal atoms with MnPS₃ are rather strong, thus guaranteeing their high stability for practical applications. Remarkably, the highly efficient ORR/OER can be achieved on Rh/MnPS₃ and Ni/MnPS₃ with lower overpotentials than those of metal benchmarks, which can be further rationalized by establishing the volcano and contour plots. Furthermore, the ML results showed that the bond length of TM atoms with the adsorbed O species (d_TM-O), the number of d electrons (N_e), the d-center (ε_d), the radius (r_TM) and the first ionization energy (I_m) of the TM atoms are the primary descriptors featuring the adsorption behavior. Our findings not only suggest novel highly efficient bifunctional oxygen electrocatalysts, but also provide cost-effective opportunities for the design of single-atom catalysts using the DFT-ML hybrid method.

Semiconducting MOFs on ultraviolet laser-induced graphene with a hierarchical pore architecture for NO2 monitoring

Due to rapid urbanization worldwide, monitoring the concentration of nitrogen dioxide (NO₂), which causes cardiovascular and respiratory diseases, has attracted considerable attention. Developing real-time sensors to detect parts-per-billion (ppb)-level NO₂ remains challenging due to limited sensitivity, response, and recovery characteristics. Herein, we report a hybrid structure of Cu₃HHTP₂, 2D semiconducting metal-organic frameworks (MOFs), and laser-induced graphene (LIG) for high-performance NO₂ sensing. The unique hierarchical pore architecture of LIG@Cu₃HHTP₂ promotes mass transport of gas molecules and takes full advantage of the large surface area and porosity of MOFs, enabling highly rapid and sensitive responses to NO₂. Consequently, LIG@Cu₃HHTP₂ shows one of the fastest responses and lowest limit of detection at room temperature compared with state-of-the-art NO₂ sensors. Additionally, by employing LIG as a growth platform, flexibility and patterning strategies are achieved, which are the main challenges for MOF-based electronic devices. These results provide key insight into applying MOFtronics as high-performance healthcare devices.

Two-Dimensional FePS3 Nanosheets as an Integrative Sonosensitizer/Nanocatalyst for Efficient Nanodynamic Tumor Therapy

As the emerging modalities for tumor therapy, sonodynamic therapy (SDT) and chemodynamic therapy (CDT) can generate reactive oxygen species (ROS), typically inducing tumor cell apoptosis. However, the construction of more efficient sonosensitizers integrated with excellent Fenton/Fenton-like catalytic activity to improve the synergistic therapeutic effect of SDT and CDT is still highly challenging. In this study, 2D semiconductor FePS₃ nanosheets (NSs), as one of the metal phosphorus trichalcogenides for both sonosensitizer and Fenton catalyst, are successfully synthesized via an ultrasonic-assisted liquid phase exfoliation method from bulk FePS₃ and further modified with lipoic acid-polyethylene glycol (LA-PEG) to obtain FePS₃ -PEG NSs with desirable biocompatibility. The in vitro and in vivo results demonstrate that the engineered FePS₃ -PEG NSs induce the combinatorial SDT/CDT effect attributing to the enhanced ROS generation and significant glutathione depletion, which can conduct highly efficient and safe tumor inhibition and prolong the life span of tumor-bearing mice. This work provides the paradigm of semiconductor FePS₃ NSs as the integrative sonosensitizer/Fenton nanocatalyst for dual nanodynamic tumor therapy, paving the new way for exploring other 2D metal phosphorus trichalcogenides in biomedicine.

Electron-Beam Induced Emergence of Mesoscopic Ordering in Layered MnPS3

Ordered mesoscale structures in 2D materials induced by small misorientations have allowed for a wide variety of electronic, ferroelectric, and quantum phenomena to be explored. Until now, the only mechanism to induce this periodic ordering was via mechanical rotations between the layers, with the periodicity of the resulting moiré pattern being directly related to twist angle. Here we report a fundamentally distinct mechanism for emergence of mesoscopic periodic patterns in multilayer sulfur-containing metal phosphorus trichalcogenide, MnPS₃, induced by the electron beam. The formation under the beam of periodic hexagonal patterns with several characteristic length scales, nucleation and transitions between the phases, and local dynamics are demonstrated. The associated mechanisms are attributed to the relative contraction of the layers caused by beam-induced sulfur vacancy formation with subsequent ordering and lattice parameter change. As a result, the plasmonic response of the system is locally altered, suggesting an element of control over plasmon resonances by electron beam patterning. We pose that harnessing this phenomenon provides both insight into fundamental physics of quantum materials and enables device applications by enabling controlled periodic potentials on the atomic scale.

The impacts of molecular adsorption on antiferromagnetic MnPS3 monolayers: enhanced magnetic anisotropy and intralayer Dzyaloshinskii-Moriya interaction

In two-dimensional (2D) magnetic systems, significant magnetic anisotropy is required to protect magnetic ordering against thermal fluctuation. In this paper, we explored the effect of molecular adsorption on the magnetic anisotropy and intralayer Dzyaloshinskii-Moriya interaction (DMI) of monolayer MnPS₃, combining the first-principles calculation and theoretical analysis. We find that molecular adsorption can break the spatial inversion symmetry in a 2D magnet, and results in a significant DMI, which is rare in pristine 2D magnets. For example, in an MPS-NO system, the magnitude of the asymmetric DMI vector increases 9 times, and the magnetocrystalline anisotropy increases 600 times compared with the pristine MPS monolayer. It is found the DMI mainly comes from the structural deformation after adsorption, whereas the increase of magnetocrystalline anisotropy mainly originates from a new 'bridge' super-exchange interaction between Mn ions and NO gas molecules. The calculated Mn-NO-Mn 'bridge' super-exchange coupling strength is much higher than the Mn-S-Mn coupling strength. Our findings offer a new strategy to increase the magnetic anisotropy and induce chiral magnetic structures in 2D magnets.

Anchoring Platinum Clusters onto Oxygen Vacancy-Modified In2O3 for Ultraefficient, Low-Temperature, Highly Sensitive, and Stable Detection of Formaldehyde

To avoid carcinogenicity, formaldehyde gas, currently being only detected at higher operating temperatures, should be selectively detected in time with ppb concentration sensitivity in a room-temperature indoor environment. This is achieved in this work through introducing oxygen vacancies and Pt clusters on the surface of In₂O₃ to reduce the optimal operating temperature from 120 to 40 °C. Previous studies have shown that only water participates in the competitive adsorption on the sensor surface. Here, we experimentally confirm that the adsorbed water on the fabricated sensor surface is consumed via a chemical reaction due to the strong interaction between the oxygen vacancies and Pt clusters. Therefore, the long-term stability of formaldehyde gas detection is improved. The results of theoretical calculations in this work reveal that the excellent formaldehyde gas detection of Pt/In₂O_3-x originates from the electron enrichment due to the surface oxygen vacancies and the molecular adsorption and activation ability of Pt clusters on the surface. The developed Pt/In₂O_3-x sensor has potential use in the ultraefficient, low-temperature, highly sensitive, and stable detection of indoor formaldehyde at an operating temperature as low as room temperature.

Transition-metal decorated graphdiyne monolayer as an efficient sensor toward phosphide (PH3) and arsine (AsH3)

Graphdiyne (GDY), a two-dimensional (2D) carbon, uniquely possesses mixed sp–sp2 hybridization, uniform nano-sized porous structure, semiconducting character, and excellent electrical conductivity.

Atomically dispersed Pb ionic sites in PbCdSe quantum dot gels enhance room-temperature NO2 sensing

Atmospheric NO2 is of great concern due to its adverse effects on human health and the environment, motivating research on NO2 detection and remediation. Existing low-cost room-temperature NO2 sensors often suffer from low sensitivity at the ppb level or long recovery times, reflecting the trade-off between sensor response and recovery time. Here, we report an atomically dispersed metal ion strategy to address it. We discover that bimetallic PbCdSe quantum dot (QD) gels containing atomically dispersed Pb ionic sites achieve the optimal combination of strong sensor response and fast recovery, leading to a high-performance room-temperature p-type semiconductor NO2 sensor as characterized by a combination of ultra-low limit of detection, high sensitivity and stability, fast response and recovery. With the help of theoretical calculations, we reveal the high performance of the PbCdSe QD gel arises from the unique tuning effects of Pb ionic sites on NO2 binding at their neighboring Cd sites.

A Covalent Organic-Inorganic Hybrid Superlattice Covered with Organic Functional Groups for Highly Sensitive and Selective Gas Sensing

Organic-inorganic hybrid superlattices (OIHSLs) hold attractive physical and chemical properties, while the construction of single-crystal covalent OIHSLs has not been achieved. Herein a coordination assembly strategy was proposed to create a single-crystal covalent OIHSL PbBDT (BDT=1,4-benzenedithiolate), where layered [PbS₂ ] sublattice covalently connects with benzene sublattice. The covalent bonding offers better thermo-/chemi-stability, inter-sublattice electron transport, and unique organic-group-functionalized surface, which may enable better performances in chemical applications than non-covalent OIHSL. These features endow PbBDT with the highest sensitivity, the lowest detection limit and excellent selectivity towards NO₂ at room temperature among all chemiresistive gas-sensing materials with reported response time less than 2 min without the need of light assistance.

A Photovoltaic Self-Powered Gas Sensor Based on All-Dry Transferred MoS2 /GaSe Heterojunction for ppb-Level NO2 Sensing at Room Temperature

Traditional gas sensors are facing the challenge of low power consumption for future application in smart phones and wireless sensor platforms. To solve this problem, self-powered gas sensors are rapidly developed in recent years. However, all reported self-powered gas sensors are suffering from high limit of detection (LOD) toward NO2 gas. In this work, a photovoltaic self-powered NO2 gas sensor based on n-MoS2 /p-GaSe heterojunction is successfully prepared by mechanical exfoliation and all-dry transfer method. Under 405 nm visible light illumination, the fabricated photovoltaic self-powered gas sensors show a significant response toward ppb-level NO2 with short response and recovery time and high selectivity at room temperature (25 °C). It is worth mentioning that the LOD toward NO2 of this device is 20 ppb, which is the lowest of the reported self-powered room-temperature gas sensors so far. The discussed devices can be used as building blocks to fabricate more functional Internet of things devices.

High-dispersed Fe2O3/Fe nanoparticles residing in 3D honeycomb-like N-doped graphitic carbon as high-performance room-temperature NO2 sensor

This work illustrates a simple polymer thermal treatment strategy to develop high-dispersed Fe₂O₃/Fe nanoparticles residing in honeycomb-like N-doped graphitic carbon (Fe₂O₃/Fe@N-GC). The as-prepared Fe₂O₃/Fe@N-GC composites consist of three-dimensional (3D) strutted interconnective graphitic carbon frame, which would not only refrain from restacking and facilitate the charge transfer, but also provide more reaction interface between gas molecules and materials. Benefiting from the synergistic merits of Fe₂O₃/Fe, N-doping graphitic carbon, high surface area and unique 3D architectures, the optimal Fe₂O₃/Fe@N-GC presents impressive sensitivity and selectivity for NO₂ gas detection at room temperature with the response of 25.48-100 ppm, response time of 2.13 s, recovery time of 11.73 s, detection limit of 10 ppb and as long as 60 days of stability. As a result, the present Fe₂O₃/Fe@N-GC composite with an easy fabrication method and high sensitivity, selectivity, stabitliy towards NO₂ at RT would inspire various designs based on the 3D honeycomb structure for more real applications in gas sensors.

Polymer-assisted TEM specimen preparation method for oxidation-sensitive 2D materials

By structural and analytical TEM and scanning electron microscopy experiments we show that atomically-resolved structural characterization of oxidation-sensitive two-dimensional material is strongly hindered when the final step of the preparation process, the transfer to the TEM grid, is performed with a wet etching method involving bases or acids, interacting with the highly reactive sample surface. Here we present an alternative polymer-assisted and mechanical-exfoliation-based sample preparation method and demonstrate it on selected oxidation-sensitive transition metal phosphorus trisulfides and transition metal dichalcogenides. The analysis, obtained from the samples prepared with both of the methods clearly show that oxidation is the origin of discrepancy, the oxidation during the final preparation step is strongly reduced only when the new method is applied, and atomically-resolved structural characterization of the pristine structures is now possible.

Room-temperature efficient NO2 gas sensors fabricated by porous 3D flower-like ZnAl-layered double hydroxides

Three-dimensional (3D) flower-like zinc and aluminum-sodium dodecyl sulfate-layered double hydroxides (ZnAl-SDS-LDHs) intercalated by anions were prepared using a simple one-step hydrothermal method.