Influence of Pretreatment Severity Factor and Hammett Acidity on Softwood Fractionation by an Acidic Protic Ionic Liquid

Microwave-enhanced hydrolysis of cellulose by acidic ionic liquids

In the [Bmim]Cl reaction medium, five different acidic ionic liquids were used as catalysts to study the effects of reaction time, reaction temperature, system water content, catalyst dosage, microwave power, and other factors on cellulose hydrolysis under microwave irradiation. The results showed that in the [Bmim]Cl reaction system, using N-methylpyrrolidone methylsulfonic acid salt as a catalyst, controlling the microwave reaction time at 10 min, reaction temperature at 130 °C, catalyst dosage at 1 g/g (cellulose), water addition at 0.756 μL/g ([Bmim]Cl), and microwave power at 480 W, resulted in the best cellulose hydrolysis effect with a glucose yield of 74.49%. Compared to conventional heating, the glucose yield increased by 24% and the hydrolysis time was reduced by 77%. Microwave irradiation significantly enhances the cellulose hydrolysis process in an ionic liquid medium.

Exploiting Cation Structure and Water Content in Modulating the Acidity of Ammonium Hydrogen Sulfate Protic Ionic Liquids

In this paper, we investigated the effect of cation structure and water content on proton dissociation in alkylammonium [HSO4]- protic ionic liquids (ILs) doped with 20 wt % water and correlated this with experimental Hammett acidities. For pure systems, increased cation substitution resulted in a reduction in the number of direct anion-anion neighbors leading to larger numbers of small aggregates, which is further enhanced with addition of water. We also observed spontaneous proton dissociation from [HSO4]- to water only for primary amine-based protic ILs, preceded by the formation of an anion trimer motif. Investigation using DFT calculations revealed spontaneous proton dissociation from [HSO4]- to water can occur for each of the protic ILs investigated; however, this is dependent on the size of the anion aggregates. These findings are important in the fields of catalysis and lignocellulosic biomass, where solvent acidity is a crucial parameter in biomass fractionation and lignin chemistry.

Combination of alkaline biodiesel-derived crude glycerol pretreated corn stover with dilute acid pretreated water hyacinth for highly-efficient single cell oil production by oleaginous yeast Cutaneotrichosporon oleaginosum

Single cell oil (SCO) prepared from biodiesel-derived crude glycerol (BCG) and lignocellulosic biomass (LCB) via oleaginous yeasts is an intriguing alternative precursor of biodiesel. Here, a novel strategy combining alkaline BCG pretreated corn stover and dilute acid pretreated water hyacinth for SCO overproduction was developed. The mixed pretreatment liquors (MPLs) were naturally neutralized and adjusted to a proper carbon-to-nitrogen ratio beneficial for SCO overproduction by Cutaneotrichosporon oleaginosum. The toxicity of inhibitors was relieved by dilution detoxification. The enzymatic hydrolysate of solid fractions was suitable for SCO production either separately or simultaneously with MPLs. Fed-batch fermentation of the MPLs resulted in high cell mass, SCO content, and SCO titer of 80.7 g/L, 75.7 %, and 61.1 g/L, respectively. The fatty acid profiles of SCOs implied high-quality biodiesel characteristics. This study offers a novel BCG&LCB-to-SCO route integrating BCG-based pretreatment and BCG/LCB hydrolysates co-utilization, which provides a cost-effective technical route for micro-biodiesel production.

Enhanced dissolution of galactomannan and highly efficient selenium functionalization using ionic liquids with dual roles as solvents and catalysts

Galactomannan stands as a promising heteropolysaccharide, yet its randomly distributed non-linear structures and high molecular mass remain a huge challenge in solubilization and wide range of chemical modifications. This work develops a task specific approach for efficient dissolve of galactomannan in ionic liquids (ILs) by destructing and reconstructing intermolecular/intramolecular hydrogen bonds of galactomannan. Combining density functional theory calculations and experimental results, a reasonable mechanism of polysaccharide dissolution is proposed that the hydrogen bond networks of polysaccharide are broken, thus the hydroxyl groups are fully exposed and activated to facilitate functionalization. In view of the enhanced solubilization, an excellent effect in selenylation of galactomannan is notably improved by employing ILs with dual roles as solvents and catalysts. Typically, the introduction of -SO3H in ILs (SFILs) effectively enhances the protonation ability of selenium donor and thus further improves the functionalization efficiency. Furthermore, a surprising finding is observed that selenium content and average molecular mass of functionalized polysaccharide can be manipulated by the anions-cations synergistic effect which is highly dependent on SFILs acidity strength. This work proposed an integrated and promising strategy for improving the solubilization and functionalization manipulating by ILs, showing a great referential value for the widespread application in polysaccharide-rich resources.

Highly-efficient lipid production from hydrolysate of Radix paeoniae alba residue by oleaginous yeast Cutaneotrichosporon oleaginosum

Valorization of herbal extraction residues (HERs) into value-added products is pivotal for the sustainability of Chinese medicine industry. Here, seven different enzymatic hydrolysates of dilute acid pretreated HERs were evaluated for lipid production by Cutaneotrichosporon oleaginosum. Among them, the highest sugar yield via hydrolysis and the maximum lipid production were obtained from Radix paeoniae alba residue (RPAR). More interestingly, high proportion of sugar polymers was disintegrated into fermentable sugars during the pretreatment step, allowing a cheap non-enzymatic route for producing sugars from RPAR. A repeated dilute acid pretreatment gained a high sugar concentration of 241.6 g/L through reusing the pretreatment liquor (PL) for four times. Biomass, lipid concentration, and lipid content achieved 49.5 g/L, 35.7 g/L and 72.2 %, respectively, using fed-batch culture of PL. The biodiesel parameters indicated lipids produced from HERs were suitable for biodiesel production. This study offers a cost-effective way to upgrade the HERs waste into micro-biodiesel.

Integrated Hemicellulose Extraction and Papermaking Fiber Production from Agro-Waste Biomass

The present study deals with the valorization of corn stalks in an integrated processing strategy targeting two products: extracted hemicelluloses (HC) and papermaking fibers. Preliminary trials were conducted to assess the individual or the combined effects of biomass treatment on the quality of the obtained hemicelluloses and papermaking fibers. Depending on the hot alkaline extraction (HAE) conditions, the extracted HC had a xylan content between 44-63%. The xylan removal yield ranged between 19-35%. The recovery of HC from the extraction liquor and final black liquor was significantly affected by process conditions. The experimental approach continued with the study of HAE conditions on the obtained paper's mechanical properties. The optimization approach considered conserving paper strength properties while achieving an equilibrium with the highest possible HC extraction yield. The optimal values are sodium hydroxide concentration (1%), process time (33 min), and temperature (100 °C). The xylan content in the separated HC sample was ~55%. An extended extraction of HC from the resulting pulp under hot alkaline conditions with 5% NaOH was performed to prove the HC influence on paper strength. The xylan content in HC samples was 65%. The consequence of xylan content reduction in pulp leads to 30-50% mechanical strength loss.

Combined dilute sulfuric acid and Tween 80 pretreatment of corn stover significantly improves the enzyme digestibility: synergistic removal of hemicellulose and lignin

Pretreatment is a prerequisite to tackle the issue of biomass recalcitrance, which is the major hindrance of lignocellulose-to-sugars routes. In the present study, a novel combination of dilute sulfuric acid (dilute-H₂SO₄) with Tween 80 pretreatment of corn stover (CS) was developed to significantly enhance the enzyme digestibility. Strong synergistic effects of H₂SO₄ and Tween 80 for simultaneously eliminating hemicellulose and lignin and significantly promoting saccharification yield were observed. A response surface optimization realized the maximum monomeric sugar yield of 95.06% at 120 °C for 1.4 h with 0.75wt% of H₂SO₄ and 73.92 wt% of Tween 80. The excellent enzyme susceptibility of pretreated CS was explained by their physical and chemical characteristics via SEM, XRD, and FITR. The repeatedly recovered pretreatment liquor exerted highly-effective reusability in the subsequent pretreatments for at least four cycles. This strategy offers a highly-efficient and practical pretreatment strategy, which provides valuable information for the lignocellulose-to-sugars routes.

Optimization of lignin extraction from bamboo by ultrasound-assisted organosolv pretreatment

For a sustainable biorefinery, reduction in the recalcitrance of lignocellulosic biomass is very crucial for the efficient utilization of each fraction. The present work investigated an integrated pretreatment method to recover high-quality lignin along with the cellulose-rich pulp. An optimization study employing response surface methodology investigated the synergistic effects of ultrasound and organosolv pretreatment from Bambusa tulda (bamboo). The optimal condition (180 °C, 55 min, and 30 min sonication) resulted in 65.81 ± 2.40% of lignin yield with 95.37 ± 1.17% purity. A reduction in 7.85% yield and 1.54% purity of lignin with organosolv pretreatment highlighted the efficacy of sonication in lignin extraction. Ultrasound resulted in homolytic cleavage of the lignin-carbohydrate bond that enhanced delignification and increase the cellulose crystallinity. NMR, FTIR, GPC, and TGA of lignin suggested the superiority of sonication in maintaining lignin quality. A significant amount of β-O-4 linkages in extracted lignin is favorable for its subsequent valorization.