Electropolymerized molecularly imprinted polymer films of a bis-terthiophene dendron: folic acid quartz crystal microbalance sensing

Molecular imprinting-based ratiometric fluorescence sensors for environmental and food analysis

Environmental protection and food safety are closely related to the healthy development of human society; there is an urgent need for relevant analytical methods to determine environmental pollutants and harmful substances in food. Molecular imprinting-based ratiometric fluorescence (MI-RFL) sensors, constructed by combining molecular imprinting recognition and ratiometric fluorescence detection, possess remarkable advantages such as high selectivity, anti-interference ability, high sensitivity, non-destruction and convenience, and have attracted increasing interest in the field of analytical determination. Herein, recent advances in MI-RFL sensors for environmental and food analysis are reviewed, aiming at new construction strategies and representative determination applications. Firstly, fluorescence sources and possible sensing principles are briefly outlined. Secondly, new imprinting techniques and dual/ternary-emission fluorescence types that improve sensing performances are highlighted. Thirdly, typical analytical applications of MI-RFL sensors in environmental and food samples are summarized. Lastly, the challenges and perspectives of the MI-RFL sensors are proposed, focusing on improving sensitivity/visualization and extending applications.

Efficient Optosensing of Hippuric Acid in the Undiluted Human Urine with Hydrophilic "Turn-On"-Type Fluorescent Hollow Molecularly Imprinted Polymer Microparticles

The development of complex biological sample-compatible fluorescent molecularly imprinted polymers (MIPs) with improved performances is highly important for their real-world bioanalytical and biomedical applications. Herein, we report on the first hydrophilic "turn-on"-type fluorescent hollow MIP microparticles capable of directly, highly selectively, and rapidly optosensing hippuric acid (HA) in the undiluted human urine samples. These fluorescent hollow MIP microparticles were readily obtained through first the synthesis of core-shell-corona-structured nitrobenzoxadiazole (NBD)-labeled hydrophilic fluorescent MIP microspheres by performing one-pot surface-initiated atom transfer radical polymerization on the preformed "living" silica particles and subsequent removal of their silica core via hydrofluoric acid etching. They showed "turn-on" fluorescence and high optosensing selectivity and sensitivity toward HA in the artificial urine (the limit of detection = 0.097 μM) as well as outstanding photostability and reusability. Particularly, they exhibited much more stable aqueous dispersion ability, significantly faster optosensing kinetics, and higher optosensing sensitivity than their solid counterparts. They were also directly used for quantifying HA in the undiluted human urine with good recoveries (96.0%-102.0%) and high accuracy (RSD ≤ 4.0%), even in the presence of several analogues of HA. Such fluorescent hollow MIP microparticles hold much promise for rapid and accurate HA detection in the clinical diagnostic field.

Folic Acid Determination in Food Samples Using Green Synthesized Copper Oxide Nanoparticles and Electro-Poly (Methyl Orange) Sensor

Copper (II) oxide nanoparticles (CuONPs) were green synthesized using Ocimum basilicum leaves aqueous extract in which polyphenols act as reducing and stabilizing agents. The synthesized CuONPs were characterized using X-ray diffraction spectroscopy, Fourier transform infrared spectroscopy, transmission electron microscopy, selected area electron diffraction, and Brunauer–Emmett–Teller (BET) surface area analysis. The analyses indicated the formation of crystalline rod-like monoclinic pure CuONPs with a mean grain size of 15 nm, a surface area of 396 m2 g−1, and a total pore volume of 0.71 cm3 g−1. A glassy carbon electrode (GCE) was modified using the synthesized CuONPs and electropolymerized poly(methyl orange) (PMO). The modified PMO/CuONPs/GCE electrode was electrochemically characterized and applied for the estimation of folic acid (FA) by cyclic voltammetry, chronoamperometry, linear sweep voltammetry, and differential pulse voltammetry techniques. The influence of pH (7), scan rate (50 mV/s), supporting electrolyte (0.1 M KCl) and FA concentration has been optimized. FA is precisely determined in the range from 0.01 to 1.5 µΜ with a low detection limit (0.002 µΜ), a low quantitation limit (0.068 µΜ), high reproducibility (RSD 0.37, 10 measurements), and high stability (98% activity after 50 days). FA in food samples was determined by the new sensor with high recoveries from 93 to 108.8%.

Graphical Abstract

Biological sample-compatible Au nanoparticle-containing fluorescent molecularly imprinted polymer microspheres by combining RAFT polymerization and Au-thiol chemistry

The development of biological sample-compatible fluorescent molecularly imprinted polymers (MIPs) with more functions and/or improved performance is of great importance for various bioanalytical and biomedical applications, but remains challenging. Herein,...

Thiophene-Based Trimers and Their Bioapplications: An Overview

Certainly, the success of polythiophenes is due in the first place to their outstanding electronic properties and superior processability. Nevertheless, there are additional reasons that contribute to arouse the scientific interest around these materials. Among these, the large variety of chemical modifications that is possible to perform on the thiophene ring is a precious aspect. In particular, a turning point was marked by the diffusion of synthetic strategies for the preparation of terthiophenes: the vast richness of approaches today available for the easy customization of these structures allows the finetuning of their chemical, physical, and optical properties. Therefore, terthiophene derivatives have become an extremely versatile class of compounds both for direct application or for the preparation of electronic functional polymers. Moreover, their biocompatibility and ease of functionalization make them appealing for biology and medical research, as it testifies to the blossoming of studies in these fields in which they are involved. It is thus with the willingness to guide the reader through all the possibilities offered by these structures that this review elucidates the synthetic methods and describes the full chemical variety of terthiophenes and their derivatives. In the final part, an in-depth presentation of their numerous bioapplications intends to provide a complete picture of the state of the art.

Ultra-durable, multi-template molecularly imprinted polymers for ultrasensitive monitoring and multicomponent quantification of trace sulfa antibiotics

Traditional analysis methods are susceptible to interference caused by the complexity of sample matrices, and detector surface fouling arising from nonspecific adsorption of microorganisms (in biological samples) which leads in particular to a gradual loss of sensitivity. Imprinted materials can be used to effectively reduce interference originating in the matrices. However, the poor reproducibility and multicomponent quantification of trace antibiotics represent significant challenges to the detection process. Meanwhile, the high biological risk presented by bacterial antibiotic immunity and the persistence of antibiotics in foodstuffs, especially meat, both caused by the overuse of sulfonamide antibiotics, remain urgent issues. Here, we present the first example of a method for the accurate quantification of trace sulfa antibiotics (SAs) based on multi-template imprinted polymers (MMIPs). Levels of multiple SAs have been simultaneously successfully quantified by applying MMIP extraction coupled with UPLC-MS/MS analysis. This method shows excellent linearity of detection in the range of 0.1-500 μg L^-1, and ultrasensitivity with low limits of detection of 0.03 μg L^-1. The maximum SA residue recovered from sample tissues by using MMIPs was 5.48 μg g^-1. MMIP-coupled UPLC-MS/MS quantification of SAs is an accurate and repeatable method for the monitoring of SA accumulation in mouse tissue samples. It also provides an effective strategy for the tracking and quantification of drugs in other biological samples.

Application of molecularly imprinted polymers for the separation and detection of aflatoxin

Aflatoxins are extremely harmful carcinogens to humans and animals. In recent years, attention has been directed toward the application of molecular imprinting polymers for the separation and detection of aflatoxin. In this review, polymerization methods for the preparation of molecular imprinting polymers for aflatoxin detection, such as lump-bulk polymerization, spherical molecular imprinting polymer synthesis, surface-imprinted polymerization, and electropolymerization, are described. The applications of molecular imprinting polymers in solid-phase extraction, biosensors, and the surface-enhanced Raman detection of aflatoxin are also reviewed in this paper.

Biological Sample-Compatible Ratiometric Fluorescent Molecularly Imprinted Polymer Microspheres by RAFT Coupling Chemistry

Ratiometric fluorescent molecularly imprinted polymer (MIP) sensors hold great promise in many bioanalytical areas because of their high sensitivity and selectivity as well as excellent self-referencing and visual detection capability. However, their synthetic strategies are rather limited and the development of such optosensing MIPs that can directly and selectively quantify small organic analytes in complex biological samples remains a formidable challenge owing to the complexity of sample matrices. Herein, a versatile and modular strategy to obtaining well-defined ratiometric fluorescent MIP microspheres capable of directly and selectively detecting an organic herbicide [2,4-dichlorophenoxyacetic acid (2,4-D)] in undiluted pure milks is described. First, it involves the synthesis of uniform "living" polymer particles via RAFT precipitation polymerization, their successive well-controlled grafting of a polymer shell labeled with red CdTe QDs (being inert to 2,4-D) and an MIP shell labeled with green 4-nitrobenzo[c][1,2,5]oxadiazole (NBD) units (showing fluorescence "light-up" upon binding 2,4-D) via surface-initiated RAFT polymerization, and final grafting of hydrophilic poly(N-isopropylacrylamide) brushes via an efficient coupling reaction (i.e., RAFT coupling chemistry). The resulting hydrophilic dual fluorescent MIP particles showed excellent photostability and reusability. They exhibited obvious analyte binding-induced "turn-on"-type ratiometric fluorescence (and color) change and high 2,4-D optosensing selectivity and sensitivity in pure bovine milk (with a detection limit of 0.13 μM). Moreover, they were directly applied to 2,4-D determination in undiluted pure goat milk with good recoveries (96.0-103.2%) and high accuracy (RSD = 1.5-5.5%), even in the presence of several analogues of 2,4-D. The general applicability of our strategy was also demonstrated. This study paves the way for efficiently developing various advanced MIP optosensors (of easily tunable structures and desired properties) highly promising in many bioanalytical applications.

Well-defined hydrophilic "turn-on"-type ratiometric fluorescent molecularly imprinted polymer microspheres for direct and highly selective herbicide optosensing in the undiluted pure milks

Molecularly imprinted polymer (MIP)-based optosensing materials capable of direct, reliable, and highly selective detection of small organic analytes in complex aqueous samples hold great promise in many bioanalytical applications, but their development remains a challenging task. Addressing this issue, well-defined hydrophilic "turn-on"-type ratiometric fluorescent MIP microspheres are developed via a versatile and modular strategy based on the controlled/"living" radical polymerization method. Its general principle was demonstrated by the synthesis of red CdTe quantum dot (QD)-labeled silica particles with surface-bound atom transfer radical polymerization (ATRP)-initiating groups via the one-pot sol-gel reaction and their successive grafting of a thin fluorescent 2,4-D (an organic herbicide)-MIP layer (labeled with green organic fluorophores bearing both nitrobenzoxadiazole (NBD) and urea interacting groups) and hydrophilic poly(glyceryl monomethacrylate) (PGMMA) brushes via surface-initiated ATRP. The introduction of PGMMA brushes and rationally selected dual fluorescence labeling (i.e., red CdTe QDs being inert to 2,4-D and green NBD showing fluorescence "light-up" upon binding 2,4-D) onto MIP particles afforded them excellent complex aqueous sample-compatibility (due to their largely enhanced hydrophilicity) and analyte binding-induced "turn-on"-type ratiometric fluorescence changes, respectively. Such advanced MIP particles proved to be promising optosensing materials, which had a detection limit of 0.13 μM and showed obvious fluorescent color change upon binding different concentrations of 2,4-D in the undiluted pure milk. Moreover, they were successfully applied for direct and highly selective quantification of 2,4-D in the undiluted pure goat and bovine milks with good recoveries (97.9%-104.5%), even in the presence of several analogues of 2,4-D.

Advances in Molecularly Imprinting Technology for Bioanalytical Applications

In recent years, along with the rapid development of relevant biological fields, there has been a tremendous motivation to combine molecular imprinting technology (MIT) with biosensing. In this situation, bioprobes and biosensors based on molecularly imprinted polymers (MIPs) have emerged as a reliable candidate for a comprehensive range of applications, from biomolecule detection to drug tracking. Unlike their precursors such as classic immunosensors based on antibody binding and natural receptor elements, MIPs create complementary cavities with stronger binding affinity, while their intrinsic artificial polymers facilitate their use in harsh environments. The major objective of this work is to review recent MIP bioprobes and biosensors, especially those used for biomolecules and drugs. In this review, MIP bioprobes and biosensors are categorized by sensing method, including optical sensing, electrochemical sensing, gravimetric sensing and magnetic sensing, respectively. The working mechanism(s) of each sensing method are thoroughly discussed. Moreover, this work aims to present the cutting-edge structures and modifiers offering higher properties and performances, and clearly point out recent efforts dedicated to introduce multi-sensing and multi-functional MIP bioprobes and biosensors applicable to interdisciplinary fields.

Sensing CA 15-3 in point-of-care by electropolymerizing O-phenylenediamine (oPDA) on Au-screen printed electrodes

This work presents an alternative device for cancer screening in liquid biopsies. It combines a biomimetic film (i) with electrochemical detection (ii). The biomimetic film (i) was obtained by electro-polymerizing amine-substituted benzene rings around a CA 15–3 target. This protein target was previously adsorbed on a gold (Au) support and incubated in charged monomers (4-Styrenesulfonate sodium and 3-Hydroxytyraminium chloride). The protein was further eliminated by enzymatic activity, leaving behind vacant sites for subsequent rebinding. Electrochemical detection (ii) was achieved on an Au working electrode, designed on commercial screen-printed electrodes. Raman spectroscopy, atomic force microscopy and ellipsometric readings were used to follow the chemical modification of the Au surface. The ability of the material to rebind CA15-3 was monitored by electrochemical techniques. The device displayed linear responses to CA15-3 ranging from 0.25 to 10.00 U/mL, with detection limits of 0.05 U/mL. Accurate results were obtained by applying the sensor to the analysis of CA15-3 in PBS buffer and in serum samples. This biosensing device displayed successful features for the detection of CA 15–3 and constitutes a promising tool for breast cancer screening procedures in point-of-care applications. Moreover, its scale-up seems feasible as it contains a plastic antibody assembled in situ, in less than 1 minute, and the analysis of serum takes less than 30 minutes.

Green Strategies for Molecularly Imprinted Polymer Development

Molecular imprinting is a powerful technology to create artificial receptors within polymeric matrices. Although it was reported for the first time by Polyakov, eighty-four years ago, it remains, nowadays, a very challenging research area. Molecularly imprinted polymers (MIPs) have been successfully used in several applications where selective binding is a requirement, such as immunoassays, affinity separation, sensors, and catalysis. Conventional methods used on MIP production still use large amounts of organic solvents which, allied with stricter legislation on the use and release of chemicals to the environment and the presence of impurities on final materials, will boost, in our opinion, the use of new cleaner synthetic strategies, in particular, with the application of the principles of green chemistry and engineering. Supercritical carbon dioxide, microwave, ionic liquids, and ultrasound technology are some of the green strategies which have already been applied in MIP production. These strategies can improve MIP properties, such as controlled morphology, homogeneity of the binding sites, and the absence of organic solvents. This review intends to give examples reported in literature on green approaches to MIP development, from nano- to micron-scale applications.

Molecular Imprinting Technology in Quartz Crystal Microbalance (QCM) Sensors

Molecularly imprinted polymers (MIPs) as artificial antibodies have received considerable scientific attention in the past years in the field of (bio)sensors since they have unique features that distinguish them from natural antibodies such as robustness, multiple binding sites, low cost, facile preparation and high stability under extreme operation conditions (higher pH and temperature values, etc.). On the other hand, the Quartz Crystal Microbalance (QCM) is an analytical tool based on the measurement of small mass changes on the sensor surface. QCM sensors are practical and convenient monitoring tools because of their specificity, sensitivity, high accuracy, stability and reproducibility. QCM devices are highly suitable for converting the recognition process achieved using MIP-based memories into a sensor signal. Therefore, the combination of a QCM and MIPs as synthetic receptors enhances the sensitivity through MIP process-based multiplexed binding sites using size, 3D-shape and chemical function having molecular memories of the prepared sensor system toward the target compound to be detected. This review aims to highlight and summarize the recent progress and studies in the field of (bio)sensor systems based on QCMs combined with molecular imprinting technology.

An electropolymerized molecularly imprinted polymer for selective carnosine sensing with impedimetric capacity

Functional monomers are designed for the development of a polymer with molecular cavities selective for the carnosine dipeptide recognition and quantification.

Aflatoxin B1 Detection Using a Highly-Sensitive Molecularly-Imprinted Electrochemical Sensor Based on an Electropolymerized Metal Organic Framework

A sensitive electrochemical molecularly-imprinted sensor was developed for the detection of aflatoxin B1 (AFB1), by electropolymerization of p-aminothiophenol-functionalized gold nanoparticles in the presence of AFB1 as a template molecule. The extraction of the template leads to the formation of cavities that are able to specifically recognize and bind AFB1 through π-π interactions between AFB1 molecules and aniline moities. The performance of the developed sensor for the detection of AFB1 was investigated by linear sweep voltammetry using a hexacyanoferrate/hexacyanoferrite solution as a redox probe, the electron transfer rate increasing when the concentration of AFB1 increases, due to a p-doping effect. The molecularly-imprinted sensor exhibits a broad linear range, between 3.2 fM and 3.2 µM, and a quantification limit of 3 fM. Compared to the non-imprinted sensor, the imprinting factor was found to be 10. Selectivity studies were also performed towards the binding of other aflatoxins and ochratoxin A, proving good selectivity.

Water-soluble plasmonic nanosensors with synthetic receptors for label-free detection of folic acid

We describe an original approach to graft molecularly imprinted polymers around gold nanorods by combining the diazonium salt chemistry and the iniferter method. This chemical strategy enables fine control of the imprinting process at the nanometer scale and provides water-soluble plasmonic nanosensors.

Electropolymerized molecularly imprinted polypyrrole film for sensing of clofibric acid

Piezoelectric quartz crystals and analogous gold substrates were electrochemically coated with molecularly imprinted polypyrrole films for pulsed amperometric detection (PAD) of clofibric acid, a metabolite of clofibrate. Cyclic voltammetry data obtained during polymerization and deposited weight estimations revealed a decrease of the polymerization rate with increasing clofibric acid concentration. XPS measurements indicated that clofibric acid could be removed after imprinting with an aqueous ethanol solution, which was further optimized by using PAD. Zeta potential and contact angle measurements revealed differences between molecularly imprinted (MIP) and non-imprinted polymer (NIP) layers. Binding experiments with clofibric acid and other substances showed a pronounced selectivity of the MIP for clofibric acid vs. carbamazepine, but the response of MIP and NIP to 2,4-dichlorophenoxyacetic acid was higher than that for clofibric acid. A smooth surface, revealed by AFM measurements, with roughness of 6-8 nm for imprinted and non-imprinted layers, might be a reason for an excessively low density of specific binding sites for clofibric acid. Furthermore, the decreased polymerization rate in the presence of clofibric acid might not result in well-defined polymer structures, which could be the reason for the lower sensitivity.

Molecularly imprinted polymer decorated nanoporous gold for highly selective and sensitive electrochemical sensors

Electrochemical nanosensors based on nanoporous gold leaf (NPGL) and molecularly imprinted polymer (MIP) are developed for pharmaceutical analysis by using metronidazole (MNZ) as a model analyte. NPGL, serving as the loading platform for MIP immobilization, possesses large accessible surface area with superb electric conductivity, while electrochemically synthesized MIP thin layer affords selectivity for specific recognition of MNZ molecules. For MNZ determination, the hybrid electrode shows two dynamic linear range of 5 × 10(-11) to 1 × 10(-9) mol L(-1) and 1 × 10(-9) to 1.4 × 10(-6) mol L(-1) with a remarkably low detection limit of 1.8 × 10(-11) mol L(-1) (S/N = 3). In addition, the sensor exhibits high binding affinity and selectivity towards MNZ with excellent reproducibility and stability. Finally, the reliability of MIP-NPGL for MNZ detection is proved in real fish tissue samples, demonstrating the potential for the proposed electrochemical sensors in monitoring drug and biological samples.

Molecular imprinting science and technology: a survey of the literature for the years 2004-2011

Herein, we present a survey of the literature covering the development of molecular imprinting science and technology over the years 2004-2011. In total, 3779 references to the original papers, reviews, edited volumes and monographs from this period are included, along with recently identified uncited materials from prior to 2004, which were omitted in the first instalment of this series covering the years 1930-2003. In the presentation of the assembled references, a section presenting reviews and monographs covering the area is followed by sections describing fundamental aspects of molecular imprinting including the development of novel polymer formats. Thereafter, literature describing efforts to apply these polymeric materials to a range of application areas is presented. Current trends and areas of rapid development are discussed.

Coupling biocatalysis with molecular imprinting in a biomimetic sensor

Make it simple: A molecularly imprinted electropolymer was combined with an enzyme in a catalytic biomimetic sensor that enabled interference-free detection of the drug aminopyrine (AP) at submicromolar concentrations in the presence of ascorbic acid and uric acid within 15 s. The sensor functioned by the peroxide-dependent conversion of AP in a layer above a product-imprinted electropolymer on an indicator electrode.

Electrochemiluminescence biosensor based on conducting poly(5-formylindole) for sensitive detection of Ramos cells

A signal-on electrochemiluminescence (ECL) biosensor devoted to the detection of Ramos cells was fabricated based on a novel conducting polymer, poly(5-formylindole) (P5FIn), which was synthesized electrochemically by direct anodic oxidation of 5-formylindole (5FIn). This ECL platform was presented by covalently coupling the 18-mer amino-substituted oligonucleotide (ODN) probes with aldehyde groups that are strongly reactive toward a variety of nucleophiles on the surface of solid substrates. The specific identification and high-affinity between aptamers and target cells, gold nanoparticles (AuNPs) enhanced ECL nanoprobes, along with P5FIn induced ECL quenching contributed greatly to the sensitivity and selectivity. The ECL signals were logarithmically linear with the concentration of Ramos cells in a wide determination range from 500 to 1.0 × 10(5) cells mL(-1), and the corresponding detection limit was 300 cells mL(-1).

Superhydrophobic colloidally textured polythiophene film as superior anticorrosion coating

In this paper, we demonstrated for the first time the use of electrodeposited superhydrophobic conducting polythiophene coating to effectively protect the underlying steel substrate from corrosion attack: by first preventing water from being absorbed onto the coating, thus preventing the corrosive chemicals and corrosion products from diffusing through the coating, and second by causing an anodic shift in the corrosion potential as it galvanically couples to the metal substrate. Standard electrochemical measurements revealed the steel coated with antiwetting nanostructured polythiophene film, which was immersed in chloride solution of different pH and temperature for up to 7 days, is very well protected from corrosion evidenced by protection efficiency of greater than 95%. Fabrication of the dual properties superhydrophobic anticorrosion nanostructured conducting polymer coating follows a two-step coating procedure that is very simple and can be used to coat any metallic surface.

Nanostructured, molecularly imprinted, and template-patterned polythiophenes for chiral sensing and differentiation

An innovation to thin-film molecular imprinting is presented for the sensitive detection and effective discrimination of chiral compounds using a portable quartz crystal microbalance transduction technique. The facile approach involves i) colloidal sphere layering of latex particles onto the surface via a Langmuir-Blodgett-like technique followed by ii) template molecular imprinting using electrodeposition of a single functional and cross-linking monomer.

Electrochemically synthesized polymers in molecular imprinting for chemical sensing

This critical review describes a class of polymers prepared by electrochemical polymerization that employs the concept of molecular imprinting for chemical sensing. The principal focus is on both conducting and nonconducting polymers prepared by electropolymerization of electroactive functional monomers, such as pristine and derivatized pyrrole, aminophenylboronic acid, thiophene, porphyrin, aniline, phenylenediamine, phenol, and thiophenol. A critical evaluation of the literature on electrosynthesized molecularly imprinted polymers (MIPs) applied as recognition elements of chemical sensors is presented. The aim of this review is to highlight recent achievements in analytical applications of these MIPs, including present strategies of determination of different analytes as well as identification and solutions for problems encountered.

Preparation of imprinted polymers at surface of magnetic nanoparticles for the selective extraction of tadalafil from medicines

In this paper, highly selective core-shell molecularly imprinted polymers (MIPs) of tadalafil on the surface of magnetic nanoparticles (MNPs) were prepared. Three widely used functional monomers 2-(trifluoromethyl) acrylic acid (TFMAA), acrylic acid (AA), and methacrylic acid (MAA) were compared theoretically as the candidates for MIP preparation. MIP-coated magnetic nanoparticles (MIP-coated MNPs) showed large adsorption capacity, high recognition ability, and fast binding kinetics for tadalafil. Furthermore, because of the good magnetic properties, MIP-coated MNPs can achieve rapid and efficient separation with an external magnetic field simply. The resulting MIP-coated MNPs were used as dispersive solid-phase extraction (DSPE) materials coupled with HPLC-UV for the selective extraction and detection of tadalafil from medicines (herbal sexual health products). Encouraging results were obtained. The amounts of tadalafil that were detected from the herbal sexual health product was 43.46 nmol g(-1), and the recoveries were in the range of 87.36-90.93% with the RSD < 6.55%.