Intelligent hydrated-sulfate template assisted preparation of nanoporous TiO(2) spheres and their visible-light application

Multishell Copper Oxide Hollow Spheres Incorporated with Fatty Amines for High Light-To-Thermal Conversion

Composite phase change materials (PCMs) are of great importance for the storage and conversion of energy. In this study, a multishell metal oxide hollow microsphere (CuOHS) was prepared by the hydrothermal method, and a new composite PCM (CuOHS@PCMs) for energy storage and conversion purposes was developed by effectively absorbing fatty amines [namely, tetradecylamine (TDA), hexadecylamine (HDA), and octadecylamine (ODA)] PCMs into the CuOHS via the abundant micropores located on the surface of the microsphere. The incorporation of uncontaminated phase alteration substances with CuOHS yields superior light absorption and leak prevention traits. The three CuOHS@PCMs, specifically CuOHS@TDA, CuOHS@HDA, and CuOHS@ODA, possess considerable latent heats of 198.8, 192.6, and 196.0 J·g-1, respectively, and exhibit desirable thermal properties even after completing 50 and 100 thermal cycles. Moreover, under illumination, the photothermal conversion efficiencies of the three variations of CuOHS@PCMs were 84.0, 81.4, and 78.0%. This CuOHS@PCMs, which are based on CuOHS, have considerable potential in the fields of photothermal conversion, solar energy harvesting, and storage.

Template-free synthesis of inorganic hollow spheres at water/"water-brother" interfaces as Fenton-like reagents for water treatment

This paper reports a template-free method to synthesize a series of inorganic hollow spheres (IHSs) including Cu-1, Cu-2, Ni-1, Ni-2 based on mineralization reactions at water/"water-brother" interfaces. "Water-brother" was defined as a solvent which is miscible with water, such as ethanol and acetone. The water/"water-brother" interfaces are very different from water/oil interfaces. The "water-brother" solvent will usually form a homogenous phase with water. Interestingly, in our method, these interfaces can be formed, observed and utilized to synthesize hollow spheres. Utilizing the unique porous properties of the spheres, their potential application in water treatment was demonstrated by using Cu-1 IHSs as Fenton-like reagents for adsorption and decomposition of Congo Red from aqueous solution. The final adsorption equilibrium was achieved after 30min with the maximum adsorption capacity of 86.1mg/g, and 97.3% removal of the dye in 80min after adsorption equilibrium. The IHSs can be reused as least 5 times after treatment by NaOH. This method is facile and suitable for large-scale production, and shows great potential for watertreatment.

Synthesis and applications of porous non-silica metal oxide submicrospheres

A variety of metal oxide particles of spherical morphology from nano to micrometer size have been reviewed with a special emphasis on the appraisal of synthetic strategies and applications in biomedical, environmental and energy-related areas.

Efficient visible light photocatalyst fabricated by depositing plasmonic Ag nanoparticles on conductive polymer-protected Si nanowire arrays for photoelectrochemical hydrogen generation

Photoelectrochemical (PEC) water splitting to produce H2 is a renewable method for addressing the worldwide energy consumption increasing and fossil fuels storage shrinking. In order to achieve sustainable PEC H2 production, the semiconductor electrodes should have good photo-absorption ability, proper band positions, and chemical stability in aqueous condition. Different from the large-band-gap semiconductors such as TiO2, which can work efficiently under UV light, Si is an narrow-band-gap semiconductor that can efficiently absorb visible light; however, Si is indirect semiconductor and susceptible to photocorrosion in aqueous solution. In this paper, we demonstrate a new strategy of first protecting and then activating to develop a stable visible light photoanode for photoelectrochemical hydrogen production. This AgNPs/PEDOT/SiNW arrays show an encouraging solar-to-chemical energy conversion efficiency of 2.86 % and a pronounced incident photo-to-current conversion efficiency (IPCE) across the whole visible region. Our strategy proposed here contributes to further improvement of corrosion protection and solar energy harvesting for narrow-band-gap semiconductors that employed in visible light photoelectrochemical and photoelectric conversion applications.

A general method for mass and template-free production of hierarchical metal oxide spheres at room-temperature

A novel and facile method is proposed for mass production of Hierarchical Metal Oxide Spheres (HMOS).

The visible-light driven photocatalytic destruction of NO(x) using mesoporous TiO2 spheres synthesized via a "water-controlled release process"

Mesoporous anatase TiO2 spheres with tunable sizes ranging from 400 nm to 3 μm were synthesized using an original so-called "water-controlled solvothemal release process". In this method, the well-known esterification reaction between ethanol and acetic acid was creatively employed to generate water gradually during a solvothermal process. Thereafter, the slowly released water molecules functioned as nucleation centers for completing the hydrolysis of titanium tetraisopropoxide to produce homogenous mesoporous TiO2 spheres. In reality, these samples consisted of densely packed nanoparticles that formed spherical secondary particles with interparticle pores. Research has demonstrated that the diameter of the TiO2 spheres can be easily tuned by controlling the concentration of the Ti source in the starting solution. Regardless of their diameter, all of these TiO2 spheres exhibited a high specific surface area (above 150 m(2) g(-1)) originating largely from the contribution of mesopores. On the merits of their porous structure and related high specific surface area, the mesoporous TiO2 spheres showed a higher photocatalytic activity than P25 for the oxidative photo-destruction of NOx gas.

Highly sensitive diagnostic assay for the detection of protein biomarkers using microresonators and multifunctional nanoparticles

We developed a novel gravimetric immunoassay for sensitive detection of multiple protein biomarkers using silicon microcantilever arrays and multifunctional hybrid nanoparticles. Magnetic-photocatalytic hybrid nanoparticles with a highly crystalline TiO(2) shell were synthesized using a solvothermal reaction without a calcination process. After functionalizing the hybrid nanoparticles and silicon cantilevers with antibodies, the nanoparticles were used to magnetically separate target biomarkers from human serum. Frequency changes of the microcantilevers due to the binding of the nanoparticles were measured using a dip-and-dry method. Frequency changes were further amplified using a photocatalytic silver reduction reaction. Several biomarkers, including interleukin-6, interferon-γ, and alpha-fetoprotein, were selectively detected using arrays of eight silicon microcantilevers. The detection limit of this assay was ∼0.1 pg/mL, which is superior to the clinical threshold of the biomarkers.

One-step high-temperature solvothermal synthesis of TiO2/sulfide nanocomposite spheres and their solar visible-light applications

A one-step high-temperature hydrated-sulfate assisted solvothermal method has been developed to synthesize TiO(2)/sulfide nanocomposite spheres. Different hybrid spheres of TiO(2)/CdS, TiO(2)/Cu(2)S, TiO(2)/FeS, TiO(2)/Co(9)S(8), and TiO(2)/ZnS were readily prepared by exploiting different hydrated sulfate. The hydrated sulfate has been proved to play multifunctional roles during the synthetic process, such as spherical template, water supplier, and composition controller. Nanocrystal CdS can be reduced from CdSO(4) at a high solvothermal temperature of 350 °C, and the TiO(2)/CdS nanocomposite spheres prepared by this method exhibit superior visible-light-driven photocatalytic efficiency because of its effective heterointerface and high crystallinity.

High-performance visible-light-driven SnS₂/SnO₂ nanocomposite photocatalyst prepared via in situ hydrothermal oxidation of SnS₂ nanoparticles

SnS₂/SnO₂ nanocomposites with tunable SnO₂ contents were prepared via in situ hydrothermal oxidation of SnS₂ nanoparticles in 0.375-4.5 mass% H₂O₂ aqueous solutions at 180 °C for 0-12 h. The structure, composition and optical properties of the as-prepared SnS₂/SnO₂ nanocomposites were characterized by X-ray diffraction, transmission electron microscopy, high-resolution transmission electron microscopy, Brunauer-Emmett-Teller (BET) surface area analysis, energy-dispersive X-ray spectroscopy, X-ray photoelectron spectroscopy, and UV-vis diffuse reflectance spectra. Furthermore, their photocatalytic properties were tested for the degradation of methyl orange in water under visible light (λ > 420 nm) irradiation. It was found that the as-prepared SnS₂/SnO₂ nanocomposites with suitable SnO₂ content not only demonstrated superior photocatalytic activity to both SnS₂ nanoparticles and physically mixed SnS₂/SnO₂ composite nanoparticles, but also had remarkable photocatalytic stability. The tight attachment of SnO₂ nanoparticles to SnS₂ nanoparticles, which can facilitate interfacial electron transfer and reduce the self-agglomeration of two components, was considered to play an important role in achieving the high photocatalytic performances exhibited by the as-prepared SnS₂/SnO₂ nanocomposites.