Fluorinated amphiphilic polymers and their blends for fouling-release applications: the benefits of a triblock copolymer surface

Catalyst- and Stabilizer-Free Rational Synthesis of Ionic Polymer Nanoparticles in One Step for Oil/Water Separation Membranes

Ionic polymer nanoparticles (IPNs) were synthesized in one pot by quaternization precipitation polymerization (QPP) as a novel polymerization technique. QPP eliminated the usage of high-cost ionic monomers and reduced the number of steps for the preparation of IPN. The monomers 2-(dimethylamino)ethyl methacrylate (DMAEMA) and 4-vinylbenzyl chloride (VBC) polymerized in the presence of azobisisobutyronitrile (AIBN) and underwent quaternization simultaneously, which yielded ionic poly(DMAEMA-co-VBC) nanoparticles in one step with the size of 50-80 nm without any stabilizer and catalyst. Similarly, 4-vinylpyridine (VP) and VBC polymerized in the presence of AIBN and underwent quaternization simultaneously, which yielded ionic poly(VP-co-VBC) nanoparticles in one step with the size of 70-90 nm without any stabilizer and catalyst. The as-synthesized IPN was further utilized for the fabrication of hydrophilic nanocomposite ultrafiltration membranes for oil/water separation. Fabricated hybrid membranes were characterized and studied for oil rejection properties. It exhibited an oil rejection of >96% with a pure water permeability of 219 L/m² h bar.

Synthesis and Phase Behavior of a Linear Amphiphilic Multiblock Copolymer

Linear amphiphilic multiblock copolymer PPMPEs, obtained through a stepwise method, and linear amphiphilic random copolymer PPMPEs-1, obtained through a one-pot method, were synthesized using poly(propylene glycol) diglycidyl ether (PPGDGE), poly(ethylene glycol) diglycidyl ether (PEGDGE), and monoethanolamine (MEA) as the main raw materials. The structures of PPMPEs and PPMPEs-1 were characterized by FT-IR, ¹H NMR, and gel permeation chromatography, which proved that the copolymers were synthesized with different components. Transmittance of the copolymer was tested by UV-vis. By changing the ratio of PEGDGE content and the concentration of the copolymer aqueous solution, the phase behaviors of PPMPEs and PPMPEs-1 were compared and studied in depth. It mainly highlighted the advantages of the stepwise method compared to the one-pot method. The transmittance of the polymer solutions could be improved by lowering the pH value in the acidic solution or increasing the pH value in the alkaline solution. Moreover, as the reaction degree of the PPMPEs hydrophobic chain segment increased, the transmittance decreased.

Nanoscale Biocompatible Structures Generated from Fluorinated Tripodal Phenylenes on Gold Nanoprisms

Modification of gold substrates with a stable, uniform and ultrathin layer of biocompatible materials is of tremendous interest for the development of bio-devices. We present the fabrication of hybrid systems consisting of triangular prism gold nanoparticles (Au@NTPs) covalently covered with tripod-shaped oligo(p-phenylenes) featuring trifluoromethyl groups. Their synthesis is accomplished using a biphenyl boronic ester as the key compound. Au@NTPs were prepared through a seedless procedure using 3-butenoic acid and benzyldimethyl ammonium chloride, and modified with aminothiol groups. Coverage of this amine-modified gold substrate with a self-assembled monolayer (SAM) of tripod-shaped molecules is carried out in ethanolic solution. The hybrid system avoids up to 70 % of protein corona formation, and allows unspecific attachment for bulky adsorbates, providing an optimal biosensing platform. Chemical composition and morphology are analyzed by transmission electron microscopy (TEM), UV-visible spectroscopy and field emission scanning electron microscopy (FESEM).

From macromonomers to bottlebrush copolymers with sequence control: synthesis, properties, and applications

Bottlebrush polymers (BBPs) are a type of comb-like macromolecules with densely grafted polymeric sidechains attached to the polymer backbones, and many intriguing properties and applications have been demonstrated due to...

Hydrophobicity of Self-Assembled Monolayers of Alkanes: Fluorination, Density, Roughness, and Lennard-Jones Cutoffs

The interplay of fluorination and structure of alkane self-assembled monolayers and how these affect hydrophobicity are explored via molecular dynamics simulations, contact angle goniometry, and surface-enhanced infrared absorption spectroscopy. Wetting coefficients are found to grow linearly in the monolayer density for both alkane and perfluoroalkane monolayers. The larger contact angles of monolayers of perfluorinated alkanes are shown to be primarily caused by their larger molecular volume, which leads to a larger nearest-neighbor grafting distance and smaller tilt angle. Increasing the Lennard-Jones force cutoff in simulations is found to increase hydrophilicity. Specifically, wetting coefficients scale like the inverse square of the cutoff, and when extrapolated to the infinite cutoff limit, they yield contact angles that compare favorably to experimental values. Nanoscale roughness is also found to reliably increase monolayer hydrophobicity, mostly via the reduction of the entropic part of the work of adhesion. Analysis of depletion lengths shows that droplets on nanorough surfaces partially penetrate the surface, intermediate between Wenzel and Cassie-Baxter states.

Silicone Elastomer with Self-Generating Zwitterions for Antifouling Coatings

Silicone elastomer-based fouling release coatings have been gaining increased attention in marine antibiofouling. However, the lack of fouling resistance limits their application. Introducing a zwitterionic polymer into silicone enhances its fouling resistance, but their incompatibility makes this challenging. In this work, a silicone elastomer with zwitterionic pendant chains has been prepared by grafting a telomer of tertiary carboxybetaine dodecafluoroheptyl ester ethyl acrylate (TCBF) and 3-mercaptopropyltriethoxysilane to the bis-silanol-terminated poly(dimethylsiloxane) (PDMS). The fluorocarbon groups drive the telomer onto the surface in the film formation process, while the TCBF groups hydrolyze and generate zwitterions on the surface, which is confirmed by attenuated total reflection infrared spectra analysis and water contact angle measurements. Bioassays using marine bacteria (Pseudomonas sp.) and diatoms (Navicula incerta) demonstrate that the antifouling efficacy is improved as the telomer content increases. The bacteria and diatom adhesion decreases by 95 and 81%, respectively, for the PDMS with 30 wt % telomer compared with the unmodified PDMS control. Meanwhile, the fouling release performance of PDMS is maintained with a pseudobarnacle removal strength of ∼0.1 MPa. This work provides a facile way to fabricate efficient silicone-based antifouling coatings.

Comparative analysis of two isocyanate-free urethane-based gels for antifouling applications

Amphiphilic gels consisting of acrylamide (AAM)/2-hydroxyethyl methacrylate (HEMA), hexafluorobutyl methacrylate (HFBMA) and non-isocyanate urethane dimethacrylate (NIUDMA) of varying molecular weights were compared. A three-level Taguchi analysis was performed using the amount of AAM/HEMA, HFBMA, NIUDMA and reaction time as dependent variables to determine the optimal formulation of the gels with maximized toughness and elastic modulus. The results were compared with commercial AF/FR Intersleek® coatings (IS 700, IS 900 and IS 1100SR) for their antifouling performance against a marine microalga (Navicula incerta), a marine bacterium (Cellulophaga lytica) and adult barnacles (Amphibalanus amphitrite). The toughness, elastic modulus and strain at break of the optimized AAM gels ranged from 3 to7 MPa, 25 to 72 MPa and 80% to 170%, respectively, whereas those of the optimized HEMA gels ranged from 1 to 3 MPa, 13 to 23 MPa and 76% to 160%, respectively. The gels, particularly AHN(E9) and HHN(E12), showed reductions of attachment compared with IS700 of up to 93% and 58%, respectively.

Synthesis, aqueous solution behavior and self-assembly of a dual pH/thermo-responsive fluorinated diblock terpolymer

The synthesis of fluorinated dual-responsive block terpolymers via sequential reversible addition–fragmentation chain transfer (RAFT) polymerization is presented.

Amphiphilic Marine Antifouling Coatings Based on a Hydrophilic Polyvinylpyrrolidone and Hydrophobic Fluorine-Silicon-Containing Block Copolymer

The development of environmentally friendly and highly efficient antifouling coatings is vastly desirable in the marine industry. Herein, we prepared a novel amphiphilic block copolymer that combined hydrophilic polyvinylpyrrolidone (PVP) with hydrophobic poly(1-(1H,1H,2H,2H-perfluorodecyloxy)-3-(3,6,9-trioxadecyloxy)-propan-2-yl acrylate) (PFA) and polydimethylsiloxane (PDMS). The amphiphilic copolymer (PVP-PFA-PDMS) was blended into a cross-linked PDMS matrix to form a set of controlled surface composition and surface-renewal coatings with efficient antifouling and fouling-release properties. These coatings incorporated the biofouling settlement resistance ability attributed to the hydrophilic PVP segments and the reduced adhesion strength attributed to the low surface energy of fluorine-silicon-containing segments. As expected, the coatings showed an excellent antifouling performance against bacteria and marine unicellular Navicula parva diatoms (98.1 and 98.5% of reduction, respectively) and fouling-release performance against pseudobarnacle adhesion (84.3% of reduction) compared to the pristine PDMS coating. Moreover, a higher-content PVP-based coatings presented higher ability to resist biofouling adhesion. The nontoxic antifouling coating developed in this paper hold the potential to be applied in a variety of marine industrial facilities.

Omni-Directional Protected Nanofiber Membranes by Surface Segregation of PDMS-Terminated Triblock Copolymer for High-Efficiency Oil/Water Emulsion Separation

An excellent antifouling membrane with high permeate flux is required for oil/water emulsion separation due to ever-increasing oily industrial wastewater. Thus, an intriguing integration of the Omni-directional protected porous membrane that combines a high porosity nanofiber membrane with a surface segregation mechanism is established for the first time. By applying polydimethylsiloxane(PDMS)-terminated triblock copolymer, the enrichment of the hydrophilic poly(ethylene oxide) (PEO) segment and the nonpolar PDMS segment on the surface of the nanofiber endowed the nanofiber membrane with underwater oleophobicity and low oil adhesion force, exhibiting oil resistance as well as oil release property. An ultrahigh permeate flux of ∼7115 L m^-2 h^-1 with a separation efficiency of ∼97.88% is achieved under the driving force of gravity (∼0.9 kPa), which is the highest permeate flux ever reported under similar conditions. Moreover, the surface segregation nanofiber membrane shows excellent reusability and ultrahigh permeate flux with the assistance of stirring in a long-term test, revealing the promising performances for the further particular application of oily wastewater.

Silicone-Based Fouling-Release Coatings for Marine Antifouling

Marine biofouling profoundly influences marine industries and activities. It slows the speed and increases the fuel consumption of ships, corrodes offshore platforms, and blocks seawater pipelines. The most effective and economical antifouling approach uses coatings. Fouling-release coatings (FRCs) with low surface free energy and high elasticity weakly adhere to marine organisms, so they can be readily removed by the water shear force. FRCs have attracted increasing interest because they are biocide-free and hence ecofriendly. However, traditional silicone-based FRCs have weak adhesion to substrates, low mechanical strength, and low fouling resistance, limiting their applications. In recent years, many attempts have been made to improve their mechanical properties and fouling resistance. This review deals with the progress in the construction of high-performance silicone-based fouling-release surfaces.

Strong Hydration at the Poly(ethylene glycol) Brush/Albumin Solution Interface

Albumin molecules are extensively used as biocompatible coatings, and poly(ethylene glycol) (PEG) materials are widely used for antifouling. PEG materials have excellent antifouling property because of their strong surface hydration. Our previous research indicates that hydration at the PEG/bovine serum albumin solution interface is stronger than that at the PEG/water interface. This research shows that this observation is general for different types of albumin molecules. Different albumins including bovine, porcine, rat, rabbit, and sheep serum albumins were studied in this research. It was found that the hydration at the PEG methacrylate (pOEGMA)/albumin solution interface is always stronger than that at the pOEGMA/water interface. Here, we define "strong interfacial hydration" as "ordered strongly hydrogen-bonded interfacial water". We believe that such a strong hydration is because of the strong hydration on the albumin surface, leading to its biocompatible property. All of the albumin molecules demonstrated stronger hydration on the pOEGMA surface compared to other protein molecules such as lysozyme and fibrinogen. The strong hydration on albumin molecules is related to the high surface coverage of glutamic acid and lysine with similar amounts.

Recent Developments in the Design of Non-Biofouling Coatings for Nanoparticles and Surfaces

Biofouling is a major issue in the field of nanomedicine and consists of the spontaneous and unwanted adsorption of biomolecules on engineered surfaces. In a biological context and referring to nanoparticles (NPs) acting as nanomedicines, the adsorption of biomolecules found in blood (mostly proteins) is known as protein corona. On the one hand, the protein corona, as it covers the NPs' surface, can be considered the biological identity of engineered NPs, because the corona is what cells will "see" instead of the underlying NPs. As such, the protein corona will influence the fate, integrity, and performance of NPs in vivo. On the other hand, the physicochemical properties of the engineered NPs, such as their size, shape, charge, or hydrophobicity, will influence the identity of the proteins attracted to their surface. In this context, the design of coatings for NPs and surfaces that avoid biofouling is an active field of research. The gold standard in the field is the use of polyethylene glycol (PEG) molecules, although zwitterions have also proved to be efficient in preventing protein adhesion and fluorinated molecules are emerging as coatings with interesting properties. Hence, in this review, we will focus on recent examples of anti-biofouling coatings in three main areas, that is, PEGylated, zwitterionic, and fluorinated coatings.

Self-assembly of cholesterol end-capped polymer micelles for controlled drug delivery

BACKGROUND

During the past few decades, drug delivery system (DDS) has attracted many interests because it could enhance the therapeutic effects of drugs and reduce their side effects. The advent of nanotechnology has promoted the development of nanosized DDSs, which could promote drug cellular uptake as well as prolong the half-life in blood circulation. Novel polymer micelles formed by self-assembly of amphiphilic polymers in aqueous solution have emerged as meaningful nanosystems for controlled drug release due to the reversible destabilization of hydrophobic domains under different conditions.

RESULTS

The amphiphilic polymers presented here were composed of cholesterol groups end capped and poly (poly (ethylene glycol) methyl ether methacrylate) (poly (OEGMA)) as tailed segments by the synthesis of cholesterol-based initiator, followed by atom transfer radical polymerization (ATRP) with OEGMA monomer. FT-IR and NMR confirmed the successfully synthesis of products including initiator and polymers as well as the Mw of the polymers were from 33,233 to 89,088 g/mol and their corresponding PDI were from 1.25 to 1.55 by GPC. The average diameter of assembled polymer micelles was in hundreds nanometers demonstrated by DLS, AFM and SEM. The behavior of the amphiphilic polymers as micelles was investigated using pyrene probing to explore their critical micelle concentration (CMC) ranging from 2.53 × 10-4 to 4.33 × 10-4 mg/ml, decided by the balance between cholesterol and poly (OEGMA). Besides, the CMC of amphiphilic polymers, the quercetin (QC) feeding ratio and polarity of solvents determined the QC loading ratio maximized reaching 29.2% certified by UV spectrum, together with the corresponding size and stability changes by DLS and Zeta potential, and thermodynamic changes by TGA and DSC. More significantly, cholesterol end-capped polymer micelles were used as nanosized systems for controlled drug release, not only alleviated the cytotoxicity of QC from 8.6 to 49.9% live cells and also achieved the QC release in control under different conditions, such as the presence of cyclodextrin (CD) and change of pH in aqueous solution.

CONCLUSIONS

The results observed in this study offered a strong foundation for the design of favorable polymer micelles as nanosized systems for controlled drug release, and the molecular weight adjustable amphiphilic polymer micelles held potential for use as controlled drug release system in practical application.

Surface-Modifying Polymers for Blood-Contacting Polymeric Biomaterials

Bulk blending is considered as one of the most effective and straightforward ways to improve the hemo-compatibility of blood-contacting polymeric biomaterials among many surface modification methods. Zwitterionic structure-, glycocalyx-like structure-, and heparin-like structure-based oligomers have been synthesized as additives and blended with base polymers to improve the blood compatibility of base polymers. Fluorinated end- and side-functionalized oligomers could promote the migration of functionalized groups to the surface of biomedical polymers without changing their bulk properties, and it highly depends on the number and concentration of functional groups. Moreover, oligomers having both zwitterion and fluorine are receiving considerable attention due to their desirable phase separation, which can avoid undesired protein adsorption and platelet adhesion. The surface analysis of the surface-modified materials is usually investigated by analytical tools such as contact angle measurement, atomic force microscopy (AFM), and X-ray photoelectron spectroscopy (XPS). Blood compatibility is mainly evaluated via platelet adhesion and protein adsorption test, and the result showed a significant decrease in the amount of undesirable adsorption. These analyses indicated that surface modification using bulk blending technique effectively improves blood compatibility of polymeric biomaterials.

Controlling the Hydration Structure with a Small Amount of Fluorine To Produce Blood Compatible Fluorinated Poly(2-methoxyethyl acrylate)

Poly(2-methoxyethyl acrylate) (PMEA) shows excellent blood compatibility because of the existence of intermediate water. Various modifications of PMEA by changing its main or side chain's chemical structure allowed tuning of the water content and the blood compatibility of numerous novel polymers. Here, we exploit a possibility of manipulating the surface hydration structure of PMEA by incorporation of small amounts of hydrophobic fluorine groups in MEA polymers using atom-transfer radical polymerization and the (macro) initiator concept. Two kinds of fluorinated MEA polymers with similar molecular weights and the same 5.5 mol % of fluorine content were synthesized using the bromoester of 2,2,3,3,4,4,5,5,6,6,7,7,8,8-pentadecafluoro-1-octanol (F15) and poly(2,2,2-trifluoroethyl methacrylate) (PTFEMA) as (macro) initiators, appearing liquid and solid at room temperature, respectively. The fibrinogen adsorption of the two varieties of fluorinated MEA polymers was different, which could not be explained only by the bulk hydration structure. Both polymers show a nanostructured morphology in the hydrated state with different sizes of the features. The measured elastic modulus of the domains appearing in atomic force microscopy and the intermediate water content shed light on the distinct mechanism of blood compatibility. Contact angle measurements reveal the surface hydration dynamics-while in the hydrated state, F15- b-PMEA reorients easily to the surface exposing its PMEA part to the water, the small solid PTFEMA block with high glass-transition temperature suppresses the movement of PTFEMA- b-PMEA and its reconstruction on the surface. These findings illustrate that in order to make a better blood compatible polymer, the chains containing sufficient intermediate water need to be mobile and efficiently oriented to the water surface.

A simple and versatile route to amphiphilic polymethacrylates: catalytic chain transfer polymerisation (CCTP) coupled with post-polymerisation modifications

Amphiphilic polymers have become key figures in the fields of pharmacology, medicine, agriculture and cosmetics.

Effect of Surface Hydration on Antifouling Properties of Mixed Charged Polymers

Interfacial water structure on a polymer surface in water (or surface hydration) is related to the antifouling activity of the polymer. Zwitterionic polymer materials exhibit excellent antifouling activity due to their strong surface hydration. It was proposed to replace zwitterionic polymers using mixed charged polymers because it is much easier to prepare mixed charged polymer samples with much lower costs. In this study, using sum frequency generation (SFG) vibrational spectroscopy, we investigated interfacial water structures on mixed charged polymer surfaces in water and how such structures change while being exposed to salt solutions and protein solutions. The 1:1 mixed charged polymer exhibits excellent antifouling property whereas other mixed charged polymers with different ratios of the positive/negative charges do not. It was found that on the 1:1 mixed charged polymer surface, SFG water signal is dominated by the contribution of the strongly hydrogen bonded water molecules, indicating strong hydration of the polymer surface. The responses of the 1:1 mixed charged polymer surface to salt solutions are similar to those of zwitterionic polymers. Interestingly, exposure to high concentrations of salt solutions leads to stronger hydration of the 1:1 mixed charged polymer surface after replacing the salt solution with water. Protein molecules do not substantially perturb the interfacial water structure on the 1:1 mixed charged polymer surface and do not adsorb to the surface, showing that this mixed charged polymer is an excellent antifouling material.

Emerging Anti-Fouling Methods: Towards Reusability of 3D-Printed Devices for Biomedical Applications

Microfluidic devices are used in a myriad of biomedical applications such as cancer screening, drug testing, and point-of-care diagnostics. Three-dimensional (3D) printing offers a low-cost, rapid prototyping, efficient fabrication method, as compared to the costly-in terms of time, labor, and resources-traditional fabrication method of soft lithography of poly(dimethylsiloxane) (PDMS). Various 3D printing methods are applicable, including fused deposition modeling, stereolithography, and photopolymer inkjet printing. Additionally, several materials are available that have low-viscosity in their raw form and, after printing and curing, exhibit high material strength, optical transparency, and biocompatibility. These features make 3D-printed microfluidic chips ideal for biomedical applications. However, for developing devices capable of long-term use, fouling-by nonspecific protein absorption and bacterial adhesion due to the intrinsic hydrophobicity of most 3D-printed materials-presents a barrier to reusability. For this reason, there is a growing interest in anti-fouling methods and materials. Traditional and emerging approaches to anti-fouling are presented in regard to their applicability to microfluidic chips, with a particular interest in approaches compatible with 3D-printed chips.

Antifouling membranes for sustainable water purification: strategies and mechanisms

One of the greatest challenges to the sustainability of modern society is an inadequate supply of clean water. Due to its energy-saving and cost-effective features, membrane technology has become an indispensable platform technology for water purification, including seawater and brackish water desalination as well as municipal or industrial wastewater treatment. However, membrane fouling, which arises from the nonspecific interaction between membrane surface and foulants, significantly impedes the efficient application of membrane technology. Preparing antifouling membranes is a fundamental strategy to deal with pervasive fouling problems from a variety of foulants. In recent years, major advancements have been made in membrane preparation techniques and in elucidating the antifouling mechanisms of membrane processes, including ultrafiltration, nanofiltration, reverse osmosis and forward osmosis. This review will first introduce the major foulants and the principal mechanisms of membrane fouling, and then highlight the development, current status and future prospects of antifouling membranes, including antifouling strategies, preparation techniques and practical applications. In particular, the strategies and mechanisms for antifouling membranes, including passive fouling resistance and fouling release, active off-surface and on-surface strategies, will be proposed and discussed extensively.

Preparation and characterization of an amphiphilic polyamide nanofiltration membrane with improved antifouling properties by two-step surface modification method

Membrane fouling is an urgent problem needing to be solved for practical application of nanofiltration membranes. In this study, an amphiphilic nanofiltration membrane with hydrophilic domains as well as low surface energy domains was developed, to integrate a fouling-resistant defense mechanism and a fouling-release defense mechanism. A simple and effective two-step surface modification of a polyamide NF membrane was applied. Firstly, triethanolamine (TEOA) with abundant hydrophilic functional groups was grafted to the membrane surface via reacting with the residual acyl chloride group of the nanofiltration membrane, making the nanofiltration membranes more hydrophilic; secondly, the 1H,1H,2H,2H-perfluorodecyltrichlorosilane (PFTS), well-known as a low surface energy material, was covalently grafted on the hydroxyl functional groups through hydrogen bonding. Filtration experiments with model foulants (bovine serum albumin (BSA) protein solution, humic acid solution (HA) and sodium alginate solution (SA)) were performed to estimate the antifouling properties of the newly developed nanofiltration membranes. As a result of surface modification proposed in this study the antifouling properties of an amphiphilic modified F-PA/PSF membrane were enhanced more than 10% compared to the PA/PSF specimen in terms of flux recovery ratio.

Schematic diagram of amphiphilic NF membrane by a two-step modification.

Antifouling behavior of self-renewal acrylate boron polymers with pyridine-diphenylborane side chains

The environmentally friendly polymers showed excellent antifouling performances in raft tests by the hydrolysis of diphenyl borane pyridine side groups.

(PtBA-co-PPEGMEMA-co-PDOMA)-g-PPFA polymer brushes synthesized by sequential RAFT polymerization and ATRP

This article reports the synthesis of semi-fluorinated (PtBA-co-PPEGMEMA-co-PDOMA)-g-PPFA polymer brushes for self-cleaning anti-fouling surfaces.

Model Amphiphilic Block Copolymers with Tailored Molecular Weight and Composition in PDMS-Based Films to Limit Soft Biofouling

A set of controlled surface composition films was produced utilizing amphiphilic block copolymers dispersed in a cross-linked poly(dimethylsiloxane) network. These block copolymers contained oligo(ethylene glycol) (PEGMA) and fluoroalkyl (AF6) side chains in selected ratios and molecular weights to control surface chemistry including antifouling and fouling-release performance. Such properties were assessed by carrying out assays using two algae, the green macroalga Ulva linza (favors attachment to polar surfaces) and the unicellular diatom Navicula incerta (favors attachment to nonpolar surfaces). All films performed well against U. linza and exhibited high removal of attached sporelings (young plants) under an applied shear stress, with the lower molecular weight block copolymers being the best performing in the set. The composition ratios from 50:50 to 60:40 of the AF6/PEGMA side groups were shown to be more effective, with several films exhibiting spontaneous removal of the sporelings. The cells of N. incerta were also removed from several coating compositions. All films were characterized by surface techniques including captive bubble contact angle, atomic force microscopy, and near edge X-ray absorption fine structure spectroscopy to correlate surface chemistry and morphology with biological performance.

Surface sensing and stress-signalling in Ulva and fouling diatoms - potential targets for antifouling: a review

Understanding the underlying signalling pathways that enable fouling algae to sense and respond to surfaces is essential in the design of environmentally friendly coatings. Both the green alga Ulva and diverse diatoms are important ecologically and economically as they are persistent biofoulers. Ulva spores exhibit rapid secretion, allowing them to adhere quickly and permanently to a ship, whilst diatoms secrete an abundance of extracellular polymeric substances (EPS), which are highly adaptable to different environmental conditions. There is evidence, now supported by molecular data, for complex calcium and nitric oxide (NO) signalling pathways in both Ulva and diatoms being involved in surface sensing and/or adhesion. Moreover, adaptation to stress has profound effects on the biofouling capability of both types of organism. Targets for future antifouling coatings based on surface sensing are discussed, with an emphasis on pursuing NO-releasing coatings as a potentially universal antifouling strategy.

Marine anti-biofouling efficacy of amphiphilic poly(coacrylate) grafted PDMSe: effect of graft molecular weight

There is currently strong motivation due to ecological concerns to develop effective anti-biofouling coatings that are environmentally benign, durable, and stable for use by the maritime industry. The antifouling (AF) and fouling-release (FR) efficacy of amphiphilic, charged copolymers composed of ~52% acrylamide, ~34% acrylic acid, and ~14% methyl acrylate grafted to poly(dimethyl siloxane) (PDMSe) surfaces were tested against zoospores of the green alga Ulva linza and the diatom Navicula incerta. The biofouling response to molecular weight variation was analyzed for grafts ranging from ~100 to 1,400 kg mol^-1, The amphiphilic coatings showed a marked improvement in the FR response, with a 55% increase in the percentage removal of diatoms and increased AF efficacy, with 92% reduction in initial attachment density of zoospores, compared to PDMSe controls. However, graft molecular weight, in the range tested, was statistically insignificant. Grafting copolymers to PDMSe embossed with the Sharklet™ microtopography did not produce enhanced AF efficacy.

Silicone Oil-Infused Slippery Surfaces Based on Sol-Gel Process-Induced Nanocomposite Coatings: A Facile Approach to Highly Stable Bioinspired Surface for Biofouling Resistance

Slippery liquid-infused surfaces (SLIPS) have aroused widespread attention due to their excellent liquid-repellency properties associated with broad applications in various fields. However, the complicated preparation processes and the vulnerable surface lubricant layers severely restrict the practical applications of SLIPS. In this work, robust transparent slippery hybrid coatings (SHCs) were easily fabricated by the infusion of sol-gel-derived nanocomposite coatings in silicone oils of varying viscosity. The prepared silicone oil-infused surfaces exhibited outstanding long-term slippery stability even under extreme operating conditions such as high shear rate, elevated evaporation, and flowing aqueous immersion. Static bacteria culture tests confirmed that the SHCs could significantly inhibit biofilm formation. In addition, bovine serum albumin adhesion experiments were conducted after lubricant loss tests, showing significantly less protein absorption and a long service life of the SLIPS. The unique ultralow bacterial attachment and remarkably long-term protein-resistant performance render the as-prepared SLIPS as a promising candidate for biomedical applications even under harsh environmental conditions.

Hybrid Hairy Janus Particles as Building Blocks for Antibiofouling Surfaces

Herein, we report a new strategy for the design of antifouling surfaces by using hybrid hairy Janus particles. The amphiphilic Janus particles possess either a spherical or a plateletlike shape and have core-shell structures with an inorganic core and hydrophilic/hydrophobic polymeric shells. Subsequently, these bifunctional Janus particles enable the fabrication of surfaces with modularity in chemical composition and final surface topography, which possess antifouling properties. The antifouling and fouling-release capability of the composite Janus particle-based surfaces is investigated using the marine biofilm-forming bacteria Cobetia marina. The Janus particle-based coatings are robust and significantly reduce bacterial retention under both static and dynamic conditions independent of the particle geometry. The plateletlike (kaolinite-based) Janus particles represent a scalable system for the rational design of antifouling coatings as well as their large-scale production and application in the future.

Aqueous-Based Fabrication of Low-VOC Nanostructured Block Copolymer Films as Potential Marine Antifouling Coatings

The ability to fabricate nanostructured films by exploiting the phenomenon of microphase separation has made block copolymers an invaluable tool for a wide array of coating applications. Standard approaches to engineering nanodomains commonly involve the application of organic solvents, either through dissolution or annealing protocols, resulting in the release of volatile organic compounds (VOCs). In this paper, an aqueous-based method of fabricating low-VOC nanostructured block copolymer films is presented. The reported procedure allows for the phase transfer of water insoluble triblock copolymer, poly(styrene-block-2 vinylpyridine-block-ethylene oxide) (PS-b-P2VP-b-PEO), from a water immiscible phase to an aqueous environment with the assistance of a diblock copolymeric phase transfer agent, poly(styrene-block-ethylene oxide) (PS-b-PEO). Phase transfer into the aqueous phase results in self-assembly of PS-b-P2VP-b-PEO into core-shell-corona micelles, which are characterized by dynamic light scattering techniques. The films that result from coating the micellar solution onto Si/SiO2 surfaces exhibit nanoscale features that disrupt the ability of a model foulant, a zoospore of Ulva linza, to settle. The multilayered architecture consists of a pH-responsive P2VP-"shell" which can be stimulated to control the size of these features. The ability of these nanostructured thin films to resist protein adsorption and serve as potential marine antifouling coatings is supported through atomic force microscopy (AFM) and analysis of the settlement of Ulva linza zoospore. Field trials of the surfaces in a natural environment show the inhibition of macrofoulants for 1 month.

Molecular level studies on interfacial hydration of zwitterionic and other antifouling polymers in situ

Antifouling polymers have wide applications in biomedical engineering and marine industry. Recently, zwitterionic materials have been reported as promising candidates for antifouling applications, while strong hydration is believed to be the key antifouling mechanism. Zwitterionic materials can be designed with various molecular structures, which affect their hydration and antifouling performance. Although strong hydration has been proposed to occur at the material surfaces, probing the solid material/water interfaces is challenging with traditional analytical techniques. Here in this review, we will review our studies on surface hydration of zwitterionic materials and other antifouling materials by using sum frequency generation (SFG) vibrational spectroscopy, which provides molecular understanding of the water structures at various material surfaces. The materials studied include zwitterionic polymer brushes with different molecular structures, amphiphilic polymers with zwitterionic groups, uncharged hydrophilic polymer brushes, amphiphilic polypeptoids, and widely used antifouling material poly(ethylene glycol). We will compare the differences among zwitterionic materials with various molecular structures as well as the differences between antifouling materials and fouling surfaces of control samples. We will also discuss the effects of pH and biological molecules like proteins on the surface hydration of the zwitterionic materials. Using SFG spectroscopy, we have measured the hydration layers of antifouling materials and found that strong hydrogen bonds are key to the formation of strong hydration layers preventing protein fouling at the polymer interfaces.

STATEMENT OF SIGNIFICANCE

Antifouling polymers have wide applications in biomedical engineering and marine industry. Recently, zwitterionic materials have been reported as promising candidates for antifouling applications, while strong hydration is believed to be the key antifouling mechanism. However, zwitterionic materials can be designed with various molecular structures, which affect their hydration and antifouling performance. Moreover, although strong hydration has been proposed to occur at the material surfaces, probing the solid material/water interfaces is challenging with traditional analytical techniques. Here in this manuscript, we will review our studies on surface hydration of zwitterionic materials and other antifouling materials by using sum frequency generation (SFG) vibrational spectroscopy, which provides molecular understanding of the water structures at various material surfaces. The materials studied include zwitterionic polymer brushes with different molecular structures, amphiphilic polymers with zwitterionic groups, uncharged hydrophilic polymer brushes, amphiphilic polypeptoids, and widely used antifouling material poly(ethylene glycol). We will compare the differences among zwitterionic materials with various molecular structures as well as the differences between antifouling materials and fouling surfaces of control samples. We will also discuss the effects of pH and biological molecules like proteins on the surface hydration of the zwitterionic materials. All the SFG results indicate that strongly hydrogen-bonded water at the materials' surfaces (strong surface hydration) is closely correlated to the good antifouling properties of the materials. This review will be widely interested by readers of Acta Biomaterialia and will impact many different research fields in chemistry, materials, engineering, and beyond.

Synthesis, Characterization and Evaluation of Urethane Co-Oligomers Containing Pendant Fluoroalkyl Ether Groups

Coatings with the ability to minimize adhesion of insect residue and other debris are of great interest for future aircraft. These aircraft will exhibit increased fuel efficiency by maintaining natural laminar flow over greater wing chord distances. Successful coatings will mitigate the adhesion of debris on laminar flow surfaces that could cause a premature transition to turbulent flow. The use of surface modifying agents (SMA) that thermodynamically orient towards the air side of a coating can provide specific surface chemistry that may lead to a reduction of contaminate adhesion. Aluminum surfaces coated with urethane co-oligomers containing various amounts of pendant fluoroalky ether groups were prepared, characterized and tested for their abhesive properties. The coated surfaces were subjected to controlled impacts with wingless fruit flies (drosophila melanogaster) using both a benchtop wind tunnel and a larger-scaled wind tunnel test facility. Insect impacts were recorded and analyzed using high-speed digital photography and the remaining residues characterized using optical surface profilometry and compared to that of an aluminum control. It was determined that using fluorinated oligomers to chemically modify coating surfaces altered the adhesion properties relative to the adhesion of insect residues to the surface.

Novel Fluorinated Polymers Containing Short Perfluorobutyl Side Chains and Their Super Wetting Performance on Diverse Substrates

Because the emission of perfluorooctanoic acid (PFOA) was completely prohibited in 2015, the widely used poly- and perfluoroalkyl substances with long perfluoroalkyl groups must be substituted by environmentally friendly alternatives. In this study, one kind of potential alternative (i.e., fluorinated polymers with short perfluorobutyl side chains) has been synthesized from the prepared monomers {i.e., (perfluorobutyl)ethyl acrylate (C4A), (perfluorobutyl)ethyl methacrylate (C4MA), 2-[[[[2-(perfluorobutyl)]sulfonyl]methyl]amino]ethyl acrylate (C4SA), and methacrylate (C4SMA)}, and the microstructure, super wetting performance, and applications of the synthesized fluorinated polymers were systematically investigated. The thermal and crystallization behaviors of the fluoropolymer films were characterized by differential scanning calorimetry and wide-angle X-ray diffraction analysis, respectively. Dynamic water-repellent models were constructed. The stable low surface energy and dynamic water- and oil-repellent properties of these synthesized fluorinated polymers with short perfluorobutyl side chains were attributed to the synergetic effect of amorphous fluorinated side chains in perfluoroalkyl acrylate and crystalline hydrocarbon pendant groups in stearyl acrylate. Outstanding water- and oil-repellent properties of fabrics and any other substrates could be achieved by a facile dip-coating treatment using a fluorinated copolymer dispersion. As a result, we believe that our prepared fluorinated copolymers are potential candidates to replace the fluoroalkylated polymers with long perfluorinated chains in nonstick and self-cleaning applications in our daily life.

Synthesis of hybrid zinc/silyl acrylate copolymers and their surface properties in the microfouling stage

Development of an environmentally friendly and efficient marine antifouling coating is a central goal in marine antifouling.

Surface Structure and Hydration of Sequence-Specific Amphiphilic Polypeptoids for Antifouling/Fouling Release Applications

Amphiphilic polypeptoids can be designed with specific sequences of hydrophilic and hydrophobic units, which determine their surface properties for antifouling/fouling release purposes. Although the sequence-dependent surface structures of polypeptoids have been extensively investigated, e.g., with X-ray spectroscopy, their molecular structures under the aqueous conditions relevant to marine fouling have not been studied. In this work, we applied sum frequency generation (SFG) vibrational spectroscopy to study the surface structures and hydration of a series of amphiphilic polypeptoid coatings with different sequences in air and water. SFG spectra, in agreement with X-ray spectroscopy studies, revealed that the surface coverage of the hydrophilic N-(2-methoxyethyl)glycine (Nme) units in air is affected by both the number and position of the hydrophobic N-(heptafluorobutyl)glycine (NF) units in the peptoid chain and is negatively correlated with the surface concentration of the fluorine element. Our ability to probe the SFG signals of water molecules at the peptoid surface provides new information on the hydrated film properties. From these SFG signals and the time evolution of water contact angles on the polymers, we see that the hydrated film properties are also dependent upon the peptoid sequence. This work indicates that the surface presence of the Nme groups and the ability of the polymers to order and strongly hydrogen bond with interfacial water molecules determine their antifouling properties, whereas the surface restructuring rate upon contact with water affects their fouling release behaviors.