Facile preparation of hierarchical polyaniline-lignin composite with a reactive silver-ion adsorbability

Facile Preparation of Photothermal Superhydrophobic Melamine Sponge Decorated with MXene and Lignin Particles for Efficient Oil/Water Separation, Fast Crude Oil Recovery, and Active Deicing

Frequent oil spills and the discharge of oily wastewaters have caused a serious threat to the environment, ecosystems, and human beings. Herein, a photothermal and superhydrophobic melamine sponge (MS) decorated with MXene and lignin particles has been prepared for the separation of oil/water mixtures, the recovery of crude oils, and active deicing. The obtained superhydrophobic melamine sponge shows a water contact angle (WCA) of 152.3° and an oil contact angle of ∼0° and possesses good chemical stability, thermal stability, and mechanical durability in terms of being immersed in various liquids (i.e., corrosive solutions, organic solvents, and boiling water) and being abrased by sandpapers. This superhydrophobic MS displays a high oil adsorption capacity of CCl4, up to 91.6 times its own weight and a high separation efficiency of 99.4%. Furthermore, the maximum surface temperature of the superhydrophobic MS reaches 57.5 °C under sunlight irradiation (1.0 kW/m2) due to the excellent photothermal heating conversion performance of MXene and lignin particles. When exposed to sunlight, the superhydrophobic MS can quickly absorb viscous crude oils up to 72 times its own weight. Also, the WCA of the superhydrophobic MS remains above 146° after 50 icing/deicing cycles, showing excellent photothermal anti-icing properties. Thus, this study presents an easy and low-cost method for designing photothermal superhydrophobic melamine sponges and opens a new avenue to the applications of efficient oil/water separation, fast crude oil recovery, and active deicing.

Porous lignin-based composites for oil/water separation: A review

Frequent oceanic oil spill incidents and the discharge of industrial oily wastewaters have caused serious threats to environments, food chains and human beings. Lignin wastes with many reactive groups exist as the byproducts from bioethanol and pulping processing industries, and they are either discarded as wastes or directly consumed as a fuel. To make full use of lignin wastes and simultaneously deal with oily wastewaters, porous lignin-based composites have been rationally designed and prepared. In this review, recent advances in the preparation of porous lignin-based composites are summarized in terms of aerogels, sponges, foams, papers, and membranes, respectively. Then, the mechanisms and the application of porous lignin-based adsorbents and filtration materials for oil/water separation are discussed. Finally, the challenges and perspectives of porous lignin-based composites are proposed in the field of oil/water separation. The utilization of abundant lignin wastes can replace fossil resources, and meanwhile porous lignin-based composites can be used to efficiently treat with oily wastewaters. The above utilization strategy opens an avenue to the rational design and preparation of lignin wastes with high-added value, and gives a possible solution to use lignin wastes in a sustainable and environmentally friendly way.

Comprehensive Evaluation of Polyaniline-Doped Lignosulfonate in Adsorbing Dye and Heavy Metal Ions

Lignosulfonate/polyaniline (LS/PANI) nanocomposite adsorbent materials were prepared by the chemical polymerization of lignosulfonate with an aniline monomer as a dopant and structure-directing agent, and the adsorption behavior of dyes as well as heavy metal ions was investigated. LS/PANI composites were used as dye adsorbents for the removal of different cationic dyes (malachite green, methylene blue, and crystal violet). The adsorption behavior of LS/PANI composites as dye adsorbents for malachite green was investigated by examining the effects of the adsorbent dosage, solution pH, initial concentration of dye, adsorption time, and temperature on the adsorption properties of this dye. The following conclusions were obtained. The optimum adsorption conditions for the removal of malachite green dye when LS/PANI composites were used as malachite green dye adsorbents were as follows: an adsorbent dosage of 20 mg, an initial concentration of the dye of 250 mg/L, an adsorption time of 300 min, and a temperature of 358 K. The LS/PANI composite adsorbed malachite green dye in accordance with the Langmuir adsorption model and pseudo-second-order kinetic model, which belongs to chemisorption-based monomolecular adsorption, and the equilibrium adsorption amount was 245.75 mg/g. In particular, the adsorption of heavy metal ion Pb2+ was investigated, and the removal performance was also favorable for Pb2+.

Photothermal, Magnetic, and Superhydrophobic PU Sponge Decorated with a Fe3O4/MXene/Lignin Composite for Efficient Oil/Water Separation

Frequent oil spills and the discharge of industrial oily wastewaters have become a serious threat to the environment, ecosystem, and human beings. Herein, a photothermal, magnetic, and superhydrophobic PU sponge decorated with a Fe3O4/MXene/lignin composite (labeled as S-Fe3O4/MXene/lignin@PU sponge) has been designed and prepared. The obtained superhydrophobic/superoleophilic PU sponge possesses excellent chemical stability, thermal stability, and mechanical durability in terms of being immersed in corrosive solutions and organic solvents and boiling water and being abrased by sandpapers, respectively. The oil adsorption capacities of the S-Fe3O4/MXene/lignin@PU sponge for various organic liquids range from 29.1 to 70.3 g/g, and the oil adsorption capacity for CCl4 can remain 69.6 g/g even after 15 cyclic adsorption tests. The separation efficiencies of the S-Fe3O4/MXene/lignin@PU sponge for n-hexane and CCl4 are higher than 98% in different environments (i.e., water, hot water, 1 mol/L NaOH, 1 mol/L NaCl, and 1 mol/L HCl). More importantly, the introduction of three light absorbers (i.e., Fe3O4, MXene, and lignin) into the S-Fe3O4/MXene/lignin@PU sponge shows a synergistic effect in the photothermal heat conversion performance, and the maximum surface temperature reaches 64.4 °C under sunlight irradiation (1.0 kW/m2). The separation flux of the S-Fe3O4/MXene/lignin@PU sponge for viscous LT147 vacuum pump oil reaches 35,469 L m-2 h-1 under sunlight irradiation, showing an increase of 27.3% compared to that of oil adsorption processes without the photothermal effect. Thus, the rational design of superhydrophobic sponges by introducing proper photothermal heat absorbers provides new insights into facile and cost-effective preparation of sponges for efficient oil/water separation.

Preparation of Symmetrical Capacitors from Lignin-Derived Phenol and PANI Composites with Good Electrical Conductivity

As a natural polymer, lignin is only less abundant in nature than cellulose. It has the form of an aromatic macromolecule, with benzene propane monomers connected by molecular bonds such as C-C and C-O-C. One method to accomplish high-value lignin conversion is degradation. The use of deep eutectic solvents (DESs) to degrade lignin is a simple, efficient and environmentally friendly degradation method. After degradation, the lignin is broken due to β-O-4 to produce phenolic aromatic monomers. In this work, lignin degradation products were evaluated as additives for the preparation of polyaniline conductive polymers, which not only avoids solvent waste but also achieves a high-value use of lignin. The morphological and structural characteristics of the LDP/PANI composites were investigated using ¹H NMR, Fourier-transform infrared spectroscopy, scanning electron microscopy, transmission electron microscopy, thermogravimetric analysis and elemental analysis. The LDP/PANI nanocomposite provides a specific capacitance of 416.6 F/g at 1 A/g and can be used as a lignin-based supercapacitor with good conductivity. Assembled as a symmetrical supercapacitor device, it provides an energy density of 57.86 Wh/kg, an excellent power density of 952.43 W/kg and, better still, a sustained cycling stability. Thus, the combination of polyaniline and lignin degradate, which is environmentally friendly, amplifies the capacitive function on the basis of polyaniline.

Enzymatic hydrolysis lignin functionalized Ti3C2Tx nanosheets for effective removal of MB and Cu2+ ions

Functionalized two-dimensional Ti₃C₂T_x (TN-EHL) was prepared as an effective adsorbent for removal of methylene blue dye (MB) and copper ions (Cu²⁺). Enzymatic hydrolysis lignin (EHL), a reproducible natural resource, was used to functionalize the Ti₃C₂T_x nanosheets. EHL can not only introduce active functional groups into TN-EHL but also prevent the oxidation of Ti₃C₂T_x, thus promoting the adsorption performance of TN-EHL. The maximum adsorption capacities of TN-EHL50 (in which the EHL content is 50 wt%) for MB and Cu²⁺ were 293.7 mg g^-1 and 49.96 mg g^-1, respectively. The higher correlation coefficients (R²) of MB (0.9996) and Cu²⁺ (0.9995) indicating that their adsorption processes can be described by the pseudo-second-order kinetic model. The MB adsorption data fit the Freundlich isotherm with R² of 0.9953, whereas the Cu²⁺ ions adsorption data fit the Langmuir isotherm with R² of 0.9998. The thermodynamic analysis indicates that the adsorption process of MB and Cu²⁺ on TN-EHL50 is spontaneous and endothermic. Significantly, the Cu²⁺ ions were reduced to Cu₂O and CuO particles during the adsorption process. Therefore, TN-EHL has a great potential as an environmentally friendly adsorbent for MB removal and recovery of Cu²⁺ ions from wastewater.

Selective Reductive Removal of Silver Ions from Acidic Solutions by Redox-Active Covalent Organic Frameworks

The selective removal and recovery of silver ions from an aqueous solution is necessary, owing to the toxicity, persistency, and recoverable value. Herein, we first reported that silver ions could be selectively removed from an acidic solution by utilizing redox-active covalent organic framework (COF) materials as an adsorbent, resulting in the loading of Ag nanoparticles (NPs) with a narrow size distribution onto the framework simultaneously. The redox-active COF not only showed promising performance in adsorbing silver ions but also had a high selectivity at a low pH value. Subsequently, it was found that the N sites of amine groups within the framework took responsibility for the Ag NP generation after the systematic investigation on the redox adsorption mechanism. Furthermore, the recycled Ag@COF materials could be further used as new adsorbents to remove Hg(II) ions from water via NPs as a "bridge", exhibiting ultrahigh atomic utilization (>100%). Accordingly, this work not only provides a novel insight for the use of redox-active COF in the removal of metal ions but also opens a new field for designing of functionalized COF for their potential application in diverse areas.

The Influence of Lignin Diversity on the Structural and Thermal Properties of Polymeric Microspheres Derived from Lignin, Styrene, and/or Divinylbenzene

This work investigates the impact of lignin origin and structural characteristics, such as molecular weight and functionality, on the properties of corresponding porous biopolymeric microspheres obtained through suspension-emulsion polymerization of lignin with styrene (St) and/or divinylbenzene (DVB). Two types of kraft lignin, which are softwood (Picea abies L.) and hardwood (Eucalyptus grandis), fractionated by common industrial solvents, and related methacrylates, were used in the synthesis. The presence of the appropriate functional groups in the lignins and in the corresponding microspheres were investigated by attenuated total reflectance Fourier transform infrared spectroscopy (ATR/FT-IR), while the thermal properties were studied by differential scanning calorimetry (DSC). The texture of the microspheres was characterized using low-temperature nitrogen adsorption. The swelling studies were performed in typical organic solvents and distilled water. The shapes of the microspheres were confirmed with an optical microscope. The introduction of lignin into a St and/or DVB polymeric system made it possible to obtain highly porous functionalized microspheres that increase their sorption potential. Lignin methacrylates created a polymer network with St and DVB, whereas the unmodified lignin acted mainly as an eco-friendly filler in the pores of St-DVB or DVB microspheres. The incorporation of biopolymer into the microspheres could be a promising alternative to a modification of synthetic materials and a better utilization of lignin.

Lignin materials for adsorption: Current trend, perspectives and opportunities

Lignin is a highly aromatic low value biomass residue, which can be utilized for chemicals, fuels and materials production. In recent years significant attention has focused on adsorbent materials from lignin. However, only 5% of available lignin is exploited worldwide, thus significant opportunities still exist for materials development. This review summarizes recent research advances in lignin-based adsorbents, with a particular emphasis on lignin, its modification and carbon materials derived from this abundant feedstock. Lignin derived activated carbons have been utilized for air pollutant adsorption (e.g. CO₂, SO₂ and H₂S), while modified lignin materials have been developed for the removal of organic dyes and organics (like methylene blue, Procion Blue MX-R and phenols), heavy metals (such as Cu, Zn, Pb and Cd), or recovery of noble metals (e.g., Pd, Au and Pt). Future perspectives highlight how green chemistry approaches for developing lignin adsorbents can generate added value processes.

Novel poly(aniline-co-3-amino-4-methoxybenzoic acid) copolymer for the separation and recovery of Pd(ii) from the leaching liquor of automotive catalysts

The PANI–AMB copolymers were prepared and used for separation and recovery palladium from the leaching solutions of the automotive catalysts.

Facile Decoration of Polyaniline Fiber with Ag Nanoparticles for Recyclable SERS Substrate

Facile synthesis of polyaniline@Ag composite has been successfully demonstrated by a simple solution-dipping method using high-aspect-ratio benzene tetracarboxylic acid-doped polyaniline (BDP) fiber as a nontoxic reducing agent as well as template cum stabilizer. In BDP@Ag composite, BDP fibers are decorated with spherical Ag nanoparticles (Ag NPs), and the population of Ag NPs on BDP fibers is controlled by changing the molar concentration of AgNO3. Importantly, Ag-NP-decorated BDP fibers (BDP@Ag composites) have been evolved as a sensitive materials for the detection of trace amounts of 4-mercaptobenzoic acid and rhodamine 6G as an analyte of surface-enhanced Raman scattering (SERS), and the detection limit is down to nanomolar concentrations with excellent recyclability. Furthermore, synthesized BDP@Ag composites are applied simultaneously as an active SERS substrate and a superior catalyst for reduction of 4-nitrothiophenol.

Selective growth of metallic nanostructures on microstructured copper substrate in solution

Two kinds of micro/nanostructured superhydrophobic CuO surfaces were achieved by the solution-immersion method.

Synthesis and electrochemical capacitance performance of polyaniline doped with lignosulfonate

Polyaniline doped with lignosulfonate (PANI/LGS) was prepared by using a facile oxidative polymerization of aniline with (NH₄)₂S₂O₈ as an oxidant, and its electrochemical capacitance performance was investigated.