Synthesis of nestlike ZnO hierarchically porous structures and analysis of their gas sensing properties

Current Trends in Nanomaterials for Metal Oxide-Based Conductometric Gas Sensors: Advantages and Limitations-Part 2: Porous 2D Nanomaterials

This article discusses the features of the synthesis and application of porous two-dimensional nanomaterials in developing conductometric gas sensors based on metal oxides. It is concluded that using porous 2D nanomaterials and 3D structures based on them is a promising approach to improving the parameters of gas sensors, such as sensitivity and the rate of response. The limitations that may arise when using 2D structures in gas sensors intended for the sensor market are considered.

Controllable Synthesis of Mo3C2 Encapsulated by N-Doped Carbon Microspheres to Achieve Highly Efficient Microwave Absorption at Full Wavebands: From Lemon-like to Fig-like Morphologies

Mo₃C₂@N-doped carbon microspheres (Mo₃C₂@NC) have been discovered to be a family of superior microwave absorbing materials. Herein, Mo₃C₂@NC was synthesized through a simple high-temperature carbonization process by evaporating a graphite anode and Mo wire in Ar and N₂ atmospheres with an N-doping content of 6.4 at. %. Attributing to the self-assembly mechanism, the number of Mo wires inserted into the graphite anode determined the morphologies of Mo₃C₂@NC, which were the unique lemon-like (1- and 2-Mo₃C₂@NC) and fig-like (3-, 4-, and 5-Mo₃C₂@NC) microstructures. 1- and 2-Mo₃C₂@NC exhibited powerful reflection losses (RLs) of -45.60, -45.59, and -47.11 dB at the S, C and X bands, respectively, which corresponded to thinner thicknesses. 3-, 4-, and 5-Mo₃C₂@NC showed outstanding absorption performance at the C, X, and Ku bands, respectively, with each value of a minimum RL less than -43.00 dB. In particular, the strongest RL (-43.56 dB) for 5-Mo₃C₂@NC corresponded to an ultrathin thickness of 1.3 mm. In addition, the maximum effective absorption bandwidth was 6.3 GHz for 4-Mo₃C₂@NC. After analysis, all Mo₃C₂@NC samples showed well-matched impedance due to the enhanced dielectric loss caused by the unique carbon structure and moderate magnetic loss derived from the weak magnetic property of Mo₃C₂. More importantly, the unique lemon-like and fig-like microstructures created sufficient interfaces and differentiated multiple reflection paths, which greatly contributed to the strong microwave absorptions at full wavebands. In full consideration of the simple preparation method and tunable absorption properties, Mo₃C₂@NC composites can be regarded as excellent electromagnetic wave absorption materials.

Enhancing triethylamine sensing of ZIF-derived ZnO microspheres arising from cobalt doping and defect engineering

Reasonable doping is beneficial to the generation of defects, which is a feasibility strategy to improve the ZnO sensing performance. Herein, we presented an in situ self-sacrificing template strategy for fabricating Co doped h-ZnO core-shell structures (h-ZnO/ZnCo_x) with different defect contents, pyrolyzing hierarchical porous ZnO (h-ZnO) sub-microspheres coated by zeolite imidazolate frameworks (h-ZnO/ZIF-ZnCo_x). The investigations of X-ray photoelectron (XPS), photoluminescence (PL) and Raman spectra indicate that donor defects include zinc interstitial (Zn_i) and oxygen vacancy (V_O) in h-ZnO/ZnCo_x can be tuned by Co dopant (x = 0-30%). Resultantly, the h-ZnO/ZnCo_x exhibits a significantly enhanced response and selectivity towards triethylamine (TEA), beyond the undoped h-ZnO, and 15% Co-doped h-ZnO (h-ZnO/ZnCo_15%) conducts the maximum responses of 1020 to 50 ppm TEA at 573 K, in the top set for the similar type of sensors. Further, the sensing mechanism of h-ZnO/ZnCo_x is elaborated, possibly resulting from abundant active oxygen species conversed from more oxygen adsorbed which corresponds to cobalt doping generating rich donor-related defects and additional electrons in h-ZnO/ZnCo_15%.

Current Applications of Gas Sensor Based on 2-D Nanomaterial: A Mini Review

Gas sensor, as one of the most important devices to detect noxious gases, provides a vital way to monitor the concentration and environmental information of gas in order to guarantee the safety of production. Therefore, researches on high sensitivity, high selectivity, and high stability have become hot issues. Since the discovery of the nanomaterial, it has been increasingly applied to the gas sensor for its distinguishing surface performances. However, 0-D and 1-D nanomaterials, with limited electronic confinement effect and surface effect, cannot reach the requirement for the production of gas sensors. This paper gives an introduction about the current researching progress and development trend of 2-D nanomaterials, analyzes the common forms of 2-D nanoscale structure, and summarizes the mechanism of gas sensing. Then, widely concerned factors including morphological properties and crystalline structure of 2-D nanomaterial, impact of doped metal on the sensibility of gas sensors, impact of symmetry, and working temperature on the selectivity of gas sensors have been demonstrated in detail. In all, the detailed analysis above has pointed out a way for the development of new 2-D nanomaterial and enhancing the sensibility of gas sensors.

Gas-Sensing Activity of Amorphous Copper Oxide Porous Nanosheets

In this paper, the gas-sensing properties of copper oxide porous nanosheets in amorphous and highly crystalline states were comparatively investigated on the premise of almost the same specific surface area, morphology and size. Unexpectedly, the results show that amorphous copper oxide porous nanosheets have much better gas sensing properties than highly crystalline copper oxide to a serious of volatile organic compounds, and the lowest detection limit (LOD) of the amorphous copper oxide porous nanosheets to methanal is even up to 10 ppb. By contrast, the LOD of the highly crystalline copper oxide porous nanosheets to methanal is 95 ppb. Experiments prove that the oxygen vacancies contained in the amorphous copper oxide porous nanosheets play a key role in improving gas sensitivity, which greatly improve the chemical activity of the materials, especially for the adsorption of molecules containing oxygen-groups such as methanal and oxygen.

Synthesis, Characterization, and Three-Dimensional Structure Generation of Zinc Oxide-Based Nanomedicine for Biomedical Applications

Zinc oxide (ZnO) nanoparticles have been studied as metal-based drugs that may be used for biomedical applications due to the fact of their biocompatibility. Their physicochemical properties, which depend on synthesis techniques involving physical, chemical, biological, and microfluidic reactor methods affect biological activity in vitro and in vivo. Advanced tool-based physicochemical characterization is required to identify the biological and toxicological effects of ZnO nanoparticles. These nanoparticles have variable morphologies and can be molded into three-dimensional structures to enhance their performance. Zinc oxide nanoparticles have shown therapeutic activity against cancer, diabetes, microbial infection, and inflammation. They have also shown the potential to aid in wound healing and can be used for imaging tools and sensors. In this review, we discuss the synthesis techniques, physicochemical characteristics, evaluation tools, techniques used to generate three-dimensional structures, and the various biomedical applications of ZnO nanoparticles.

Porous ZnO Ultrathin Nanosheets with High Specific Surface Areas and Abundant Oxygen Vacancies for Acetylacetone Gas Sensing

In this study, porous ZnO ultrathin nanosheets with abundant surface oxygen vacancies were prepared by a hydrothermal technique followed by an annealing method using graphene oxide (GO) as a template. The high specific surface area of GO with ultrathin thickness provided an important template for the ZnO ultrathin nanosheets. The as-prepared porous ZnO ultrathin nanosheets exhibited superior acetylacetone sensing performance. The sensor response of the porous ZnO ultrathin nanosheets was 191.1 for 100 ppm acetylacetone, which was approximately 4 times higher than that of ZnO clusters (prepared without GO template) at 340 °C. The porous ZnO ultrathin nanosheets also exhibited excellent selectivity and operational stability. The excellent gas sensing performance of the porous ZnO ultrathin nanosheets was due to their high specific surface area (130.5 m²/g) and abundant surface oxygen vacancy.

Zinc oxide ultraviolet photodetectors: rapid progress from conventional to self-powered photodetectors

Currently, the development of ultraviolet (UV) photodetectors (PDs) has attracted the attention of the research community because of the vast range of applications of photodetectors in modern society. A variety of wide-band gap nanomaterials have been utilized for UV detection to achieve higher photosensitivity. Specifically, zinc oxide (ZnO) nanomaterials have attracted significant attention primarily due to their additional properties such as piezo-phototronic and pyro-phototronic effects, which allow the fabrication of high-performance and low power consumption-based UV PDs. This article primarily focuses on the recent development of ZnO nanostructure-based UV PDs ranging from nanomaterials to architectural device design. A brief overview of the photoresponse characteristics of UV PDs and potential ZnO nanostructures is presented. Moreover, the recent development in self-powered PDs and implementation of the piezo-phototronic effect, plasmonic effect and pyro-phototronic effect for performance enhancement is highlighted. Finally, the research perspectives and future research direction related to ZnO nanostructures for next-generation UV PDs are summarized.

Conductometric acetone vapor sensor based on the use of gold-doped three-dimensional hierarchical porous zinc oxide microspheres

A versatile nanoprobe for acetone vapor was designed and fabricated. It is based on the use of gold-doped three-dimensional (3D) hierarchical porous zinc oxide microspheres (Au/ZnO HPMSs). The nanoprobe was synthesized by annealing zinc hydroxide carbonate precursor (obtained by a hydrothermal method) doped with gold nanoparticles. The resulting products possess a 3D open framework structure built of 2D porous nanosheets with a nanoporous wormhole-like shape. The microspheres doped with 0.5 mol% gold display a good selectivity towards acetone. The conductometric nanoprobe, typically operated at a voltage of 5 V, can detect sub-ppm levels of acetone, and the detection limit is as low as 0.2 ppm. The response (at a level of up to 100 ppm of acetone at 325 °C) was high (74 ± 1.9), and the response and recovery time are 6 and 3 s, respectively. This superior performance is ascribed (a) to the hierarchical porous ZnO architecture that warrants a large surface area; and (b) to the presence of gold nanoparticles that facilitate the chemisorption and dissociation of gas molecules. Graphical abstract Gold-doped 3D hierarchical porous ZnO microspheres (Au/ZnO HPMSs) architectures assembled by interconnected 2D porous nanosheets structures. The resistive sensor using these Au/ZnO HPMSs demonstrates outstanding acetone vapor sensing behaviors and 0.2 ppm detection limits.

Tuning crystallization and morphology of zinc oxide with polyvinylpyrrolidone: Formation mechanisms and antimicrobial activity

Zinc oxide (ZnO) particles with different shapes and sizes have been previously reported to possess unique optical, electrical, photocatalytic, and antimicrobial properties. Capping agents are routinely used to control particle morphologies; however, few studies have evaluated the influence of capping agents on the growth kinetics of ZnO particles of different shapes. Herein, we report a simple water-based chemical precipitation method to produce unique bowtie-, flower-, and nest-shaped ZnO particles using zinc nitrate and urea in the presence of polyvinylpyrrolidone (PVP). Three distinct particle morphologies are obtained by adjusting polymer concentration during synthesis. This approach is simple and could enable large-scale production of ZnO particles with diverse shapes. We monitor the morphological evolution of ZnO particles and, at different polymer concentrations, uncover the preferable PVP adsorption onto different ZnO facets that controls the growth directions of ZnO. Previous reports have demonstrated the influence of particle shape on ZnO antibacterial activity. In this study, we show that ZnO particles with these three morphologies exhibit similar bacterial killing efficacy towards Escherichia coli and Staphylococcus aureus. Our detailed mechanistic studies suggest that the antibacterial mechanism of ZnO particles can be attributed to both Zn²⁺ release and oxidative stress, whereas shape plays only a minor role in the antibacterial activity of ZnO particles.

Gas Sensing Performances of ZnO Hierarchical Structures for Detecting Dissolved Gases in Transformer Oil: A Mini Review

Power transformer is one of the critical and expensive apparatus in high voltage power system. Hence, using highly efficient gas sensors to real-time monitor the fault characteristic gases dissolved in transformer oil is in pressing need to ensure the smooth functionalization of the power system. Till date, as a semiconductor metal oxide, zinc oxide (ZnO) is considered as the promising resistive-type gas sensing material. However, the elevated operating temperature, slow response, poor selectivity and stability limit its extensive applications in the field of dissolved gases monitoring. In this respect, rigorous efforts have been made to offset the above-mentioned shortcomings by multiple strategies. In this review, we first introduce the various ZnO hierarchical structures which possess high surface areas and less aggregation, as well as their corresponding gas sensing performances. Then, the primary parameters (sensitivity, selectivity and stability) which affect the performances of ZnO hierarchical structures based gas sensors are discussed in detail. Much more attention is particularly paid to the improvement strategies of enhancing these parameters, mainly including surface modification, additive doping and ultraviolet (UV) light activation. We finally review gas sensing mechanism of ZnO hierarchical structure based gas sensor. Such a detailed study may open up an avenue to fabricate sensor which achieve high sensitivity, good selectivity and long-term stability, making it a promising candidate for transformer oil monitor.

Study on room temperature gas-sensing performance of CuO film-decorated ordered porous ZnO composite by In2O3 sensitization

For the first time, ordered mesoporous ZnO nanoparticles have been synthesized by a template method. The electroplating after chemical plating method was creatively used to form copper film on the surface of the prepared ZnO, and then a CuO film-decorated ordered porous ZnO composite (CuO/ZnO) was obtained by a high-temperature oxidation method. In₂O₃ was loaded into the prepared CuO film-ZnO by an ultrasonic-assisted method to sensitize the room temperature gas-sensing performance of the prepared CuO/ZnO materials. The doped In₂O₃ could effectively improve the gas-sensing properties of the prepared materials to nitrogen oxides (NO _x ) at room temperature. The 1% In₂O₃ doped CuO/ZnO sample (1 wt% In₂O₃-CuO/ZnO) showed the best gas-sensing properties whose response to 100 ppm NO _x reached 82%, and the detectable minimum concentration reached 1 ppm at room temperature. The prepared materials had a good selectivity, better response, very low detection limit, and high sensitivity to NO _x gas at room temperature, which would have a great development space in the gas sensor field and a great research value.

Morphology-Conserved Transformations of Metal-Based Precursors to Hierarchically Porous Micro-/Nanostructures for Electrochemical Energy Conversion and Storage

To meet future market demand, developing new structured materials for electrochemical energy conversion and storage systems is essential. Hierarchically porous micro-/nanostructures are favorable for designing such high-performance materials because of their unique features, including: i) the prevention of nanosized particle agglomeration and minimization of interfacial contact resistance, ii) more active sites and shorter ionic diffusion lengths because of their size compared with their large-size counterparts, iii) convenient electrolyte ingress and accommodation of large volume changes, and iv) enhanced light-scattering capability. Here, hierarchically porous micro-/nanostructures produced by morphology-conserved transformations of metal-based precursors are summarized, and their applications as electrodes and/or catalysts in rechargeable batteries, supercapacitors, and solar cells are discussed. Finally, research and development challenges relating to hierarchically porous micro-/nanostructures that must be overcome to increase their utilization in renewable energy applications are outlined.

Bio-inspired Murray materials for mass transfer and activity

Both plants and animals possess analogous tissues containing hierarchical networks of pores, with pore size ratios that have evolved to maximize mass transport and rates of reactions. The underlying physical principles of this optimized hierarchical design are embodied in Murray's law. However, we are yet to realize the benefit of mimicking nature's Murray networks in synthetic materials due to the challenges in fabricating vascularized structures. Here we emulate optimum natural systems following Murray's law using a bottom-up approach. Such bio-inspired materials, whose pore sizes decrease across multiple scales and finally terminate in size-invariant units like plant stems, leaf veins and vascular and respiratory systems provide hierarchical branching and precise diameter ratios for connecting multi-scale pores from macro to micro levels. Our Murray material mimics enable highly enhanced mass exchange and transfer in liquid–solid, gas–solid and electrochemical reactions and exhibit enhanced performance in photocatalysis, gas sensing and as Li-ion battery electrodes.

Plant and animal tissues have evolved to contain hierarchical networks of pores that maximize mass transfer and exchange. Here the authors fabricate bio-inspired materials with multi-scale macro–meso–micropores and show their enhanced performances as photocatalysts, gas sensors and Li-ion battery electrodes.

Atomic structure-dominated enhancement of acetone sensing for a ZnO nanoplate with highly exposed (0001) facet

Multilayer-assembled ZnO nanoplates predominantly exposed (0001) polar facet, but displayed best gas sensing performance with very few oxygen vacancies, due to its special atomic structure.

Nanoporous Gyroid-Structured Epoxy from Block Copolymer Templates for High Protein Adsorbability

Nanoporous epoxy with gyroid texture is fabricated by using a nanoporous polymer with gyroid-forming nanochannels as a template for polymerization of epoxy. The nanoporous polymer template is obtained from the self-assembly of degradable block copolymer, polystyrene-b-poly(l-lactide) (PS-PLLA), followed by hydrolysis of PLLA blocks. Templated polymerization can be conducted under ambient conditions to create well-defined, bicontinuous epoxy networks in a PS matrix. By taking advantage of multistep curing of epoxy, well-ordered robust nanoporous epoxy can be obtained after removal of PS template, giving robust porous materials. The through-hole nanoporous epoxy in the film state can be used as a coated layer to enhance the adsorbability for both lysozyme and bovine serum albumin.

Enhanced Gas Sensitivity and Selectivity on Aperture-Controllable 3D Interconnected Macro-Mesoporous ZnO Nanostructures

Three-dimensional (3D) macro-mesoporous structures demonstrate effective performance for gas sensing. In this work, we have designed and successfully prepared aperture-controllable three-dimensional interconnected macro-mesoporous ZnO (3D-IMM-ZnO) nanostructures by template-based layer-by-layer filtration deposition. XRD, SEM, and TEM have been used to characterize the obtained hexagonal wurzite 3D-IMM-ZnO nanostructures. Owing to its special 3D interconnected hierarchically porous structure, the 3D-IMM-ZnO nanostructures exhibit excellent gas sensing performances toward acetone and methanol. The 3D-IMM-ZnO nanostructure with the largest macropore demonstrates the best gas sensitivity owing to its largest cavity providing enough space for gas diffusion. On the basis of the results and analyses, we propose that the synergistic effect of electron liberation and electron density of acetone and the special structure make the 3D-IMM-ZnO nanostructures demonstrate better gas sensing properties than many other porous ZnO nanostructures and preferred selectivity to acetone.

A simple grinding-calcination approach to prepare the Co3O4–In2O3 heterojunction structure with high-performance gas-sensing property toward ethanol

The development of gas sensing devices with high sensitivity, good selectivity and excellent stability is becoming increasingly important since toxic or harmful gases are a threat to human health.

Applications of hierarchically structured porous materials from energy storage and conversion, catalysis, photocatalysis, adsorption, separation, and sensing to biomedicine

A comprehensive review of the recent progress in the applications of hierarchically structured porous materials is given.

Facile synthesis of mesoporous hierarchical ZnS@β-Ni(OH)2 microspheres for flexible solid state hybrid supercapacitors

Mesoporous hierarchical ZnS@β-Ni(OH)₂ microspheres have been successfully synthesized via a facile route and exhibited good performance as electrode materials for supercapacitors.

Synthesis of hierarchical nanosheet-assembled V2O5 microflowers with high sensing properties towards amines

Hierarchical three-dimensional nanosheet-assembled vanadium pentoxide (V₂O₅) microflowers are successfully synthesized by a hydrothermal method, followed by a high-temperature sintering treatment.

Synthesis of butterfly-like ZnO nanostructures and study of their self-reducing ability toward Au3+ ions for enhanced photocatalytic efficiency

Hierarchical ZnO–Au composites exhibiting enhanced photocatalytic performance were synthesized by utilizing the self-reducing ability of the as-obtained ZnO.

Mesoporous hybrid NiOx–MnOx nanoprisms for flexible solid-state asymmetric supercapacitors

Mesoporous hybrid NiO_x–MnO_x nanoprisms exhibit good performance as electrode materials for flexible solid-state symmetric supercapacitors.

CdO nanoflake arrays on ZnO nanorod arrays for efficient detection of diethyl ether

A double layer structure, CdO porous nanoflake arrays on ZnO nanorod arrays, was fabricated and achieved excellent gas-sensing performance upon exposure to diethyl ether.

Synthesis, characterization and enhanced gas sensing performance of porous ZnCo2O4 nano/microspheres

In recent years, spinel-type compounds have attracted great interest because of their gem-like qualities. However, little is known of their gas sensing properties. We report, in this paper, on a self-assembly method to prepare porous ZnCo2O4 (ZCO) nano/microspheres by a facile one-step solvothermal process and subsequent annealing. Abundant techniques were used to characterize the morphology and structure of the as-obtained compounds. Our data indicate that the hierarchical nano/microspheres are constructed from numerous nanoparticles primarily, which have a higher specific surface area (ca. 77.3 m(2) g(-1)) and are of uniform diameter (ca. 1 μm). To demonstrate their potential application, gas sensors based on the as-synthesized ZCO nano/microspheres were fabricated to test their sensing performance, whose sensing behaviours correspond to p-type semiconductors. The test results also indicate that porous spinel-type compounds have an excellent kinetic response to ethanol at an operating temperature of 175 °C and a superior selectivity. As such, hierarchical porous ZnCo2O4 nano/microspheres will hold promising potential in the gas sensor field.

Direct Growth of Freestanding ZnO Tetrapod Networks for Multifunctional Applications in Photocatalysis, UV Photodetection, and Gas Sensing

Growth of freestanding nano- and microstructures with complex morphologies is a highly desired aspect for real applications of nanoscale materials in various technologies. Zinc oxide tetrapods (ZnO-T), which exhibit three-dimensional (3D) shapes, are of major importance from a technological applications point of view, and thus efficient techniques for growth of different varieties of tetrapod-based networks are demanded. Here, we demonstrate the versatile and single-step synthesis of ZnO-T with different arm morphologies by a simple flame transport synthesis (FTS) approach, forming a network. Morphological evolutions and structural intactness of these tetrapods have been investigated in detail by scanning electron microscopy, X-ray diffraction, and micro-Raman measurements. For a deeper understanding of the crystallinity, detailed high-resolution transmission electron microscopic studies on a typical ZnO tetrapod structure are presented. The involved growth mechanism for ZnO tetrapods with various arm morphologies is discussed with respect to variations in experimental conditions. These ZnO-T have been utilized for photocatalytic degradation and nanosensing applications. The photocatalytic activities of these ZnO-T with different arm morphologies forming networks have been investigated through the photocatalytic decolorization of a methylene blue (MB) solution under UV light illumination at ambient temperature. The results show that these ZnO-T exhibit strong photocatalytic activities against MB and its complete degradation can be achieved in very short time. In another application, a prototype of nanoelectronic sensing device has been built from these ZnO-T interconnected networks and accordingly utilized for UV detection and H2 gas sensing. The fabricated device structures showed excellent sensing behaviors for promising practical applications. The involved sensing mechanisms with respect to UV photons and H2 gas are discussed in detail. We consider that such multifunctional nanodevices based on ZnO tetrapod interconnected networks will be of interest for various advanced applications.

Nanoplate-Built ZnO Hollow Microspheres Decorated with Gold Nanoparticles and Their Enhanced Photocatalytic and Gas-Sensing Properties

Hierarchical porous ZnO microspheres decorated with gold nanoparticles (AuNPs) were successfully synthesized by a facile solvothermal route. The hierarchical ZnO superstructure was constructed of interconnected nanoplates with numerous voids. Photoluminescence, X-ray photoelectron spectroscopy, and electron paramagnetic resonance measurements demonstrated that the main defects were oxygen vacancies (V(O)(•)) with minor interstitial oxygen (O(i)(-)) in the hierarchical ZnO hollow microspheres. The as-prepared hierarchical ZnO hollow microspheres and the AuNPs used to decorate them were examined for their photocatalytic degradation ability and as gas sensors. The photodegradation results demonstrated that the degradation rate constant on rhodamine B for undecorated ZnO microspheres was 0.43 min(-1), which increased to 1.76 min(-1) for AuNP-decorated ZnO microspheres. The AuNP-functionalized ZnO microspheres displayed superior sensing properties, with a 3-fold enhancement in their gas response to 1 ppb of dibutyl phthalate.

Tunable macro–mesoporous ZnO nanostructures for highly sensitive ethanol and acetone gas sensors

Macro–mesoporous ZnO nanostructures with a wurtzite hexagonal structure have been successfully synthesized using polymer colloids and ZnO nanoparticles, and exhibit excellent gas sensing performances.

Rectangular ZnO porous nano-plate assembly with excellent acetone sensing performance and catalytic activity

An assembled porous rectangular single crystalline ZnO plate with superior acetone sensing performance and catalytic activity is presented.

Synthesis of porous In2O3 microspheres as a sensitive material for early warning of hydrocarbon explosions

We report the template-free synthesis of porous nanoparticle-assembled In₂O₃ microspheres that can serve as a highly sensitive material for the detection of C1–C3 hydrocarbons.

One-step template-free synthesis of hollow core–shell α-Fe2O3 microspheres with improved lithium storage and gas-sensing properties

The hollow core–shell α-Fe₂O₃ microspheres with improved lithium storage and gas-sensing properties have been fabricated by the template-free hydrothermal route.

ZnO nanoflowers with single crystal structure towards enhanced gas sensing and photocatalysis

Single crystal ZnO nanoflowers composed of small ZnO nanoparticles with high crystallinity and grown along the {100} facet with an average size of 60 nm have a much better gas sensing response. ZnO–reduced graphene oxide (RGO) composites showed enhanced photocatalytic performance.

Recent advances in low temperature, solution processed morphology tailored ZnO nanoarchitectures for electron emission and photocatalysis applications

A comprehensive review is given on recent developments of multidimensional nanostructural ZnO processed via low temperature solution approaches and their functional prospect in field emission and environmental remediation.

Fabrication of hierarchically porous materials and nanowires through coffee ring effect

We report a versatile method for the fabrication of nanowires and hierarchical porous materials from a wide variety of ceramic materials such as CaCO3, ZnO, CuO, Co3O4, Co-doped ZnO, and Ag2O. The method consists of evaporation of CO2-enriched water microdroplets (diameter ∼3 μm) deposited from an aerosol onto heated substrates (T = 120 °C). A variety of porous scaffolds with 1-3 μm sized pores can be generated by tuning the process conditions. Subsequent sintering of the scaffolds is shown to generate nanosized pores in the walls of the porous scaffold creating a dual hierarchy of pore sizes (∼50 nm and 1-3 μm). We propose a mechanism for the formation of scaffolds based on the coffee-ring effect during the evaporation of microdroplets. Ostwald-ripening of CaCO3 scaffolds prepared without sintering yields scaffold structures consisting of two-dimensional crystals of CaCO3 that are one unit cell thick. The favorable application of CaCO3 scaffolds for the enhancement of bone healing around titanium implants with improved biocompatibility is also demonstrated.