Polydopamine-coated magnetic nanoparticles for enrichment and direct detection of small molecule pollutants coupled with MALDI-TOF-MS

Effect of Polymer and Cell Membrane Coatings on Theranostic Applications of Nanoparticles: A Review

The recent decade has witnessed a remarkable surge in the field of nanoparticles, from their synthesis, characterization, and functionalization to diverse applications. At the nanoscale, these particles exhibit distinct physicochemical properties compared to their bulk counterparts, enabling a multitude of applications spanning energy, catalysis, environmental remediation, biomedicine, and beyond. This review focuses on specific nanoparticle categories, including magnetic, gold, silver, and quantum dots (QDs), as well as hybrid variants, specifically tailored for biomedical applications. A comprehensive review and comparison of prevalent chemical, physical, and biological synthesis methods are presented. To enhance biocompatibility and colloidal stability, and facilitate surface modification and cargo/agent loading, nanoparticle surfaces are coated with different synthetic polymers and very recently, cell membrane coatings. The utilization of polymer- or cell membrane-coated nanoparticles opens a wide variety of biomedical applications such as magnetic resonance imaging (MRI), hyperthermia, photothermia, sample enrichment, bioassays, drug delivery, etc. With this review, the goal is to provide a comprehensive toolbox of insights into polymer or cell membrane-coated nanoparticles and their biomedical applications, while also addressing the challenges involved in translating such nanoparticles from laboratory benchtops to in vitro and in vivo applications. Furthermore, perspectives on future trends and developments in this rapidly evolving domain are provided.

Functional Melanin Nanoparticles-Assisted Laser Desorption Ionization Mass Spectrometry for High-Sensitivity Detection of TBBPA and TBBPS Contaminations in Animal-Derived Foodstuffs

Tetrabromobisphenol A (TBBPA) and tetrabromobisphenol S (TBBPS) have been widely used as additives in various products; however, their residues damage human health mainly via dietary ingestion. The current detection techniques remain challenging in directly and sensitively identifying TBBPA and TBBPS from food samples. Matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS) has great potential as an alternative tool for the analysis of low-mass environmental pollution. Herein, we successfully screened and optimized COOH-MNP-COOH as a novel MALDI matrix to enhance deprotonation for the analysis of TBBPA and TBBPS from animal-derived food samples in negative-ion mode. Notably, COOH-MNP-COOH was synthesized by a facile self-assembly strategy and characterized by TEM, FT-IR, UV-vis, and zeta potential analysis. Compared with conventional and control matrices, the COOH-MNP-COOH matrix exhibited excellent performance of TBBPA and TBBPS with high chemical stability, favorable reproducibility, remarkable salt and protein tolerance, and high sensitivity owing to abundant active groups, stronger UV-vis absorption at 355 nm, and better hydrophilicity and biocompatibility. TBBPA and TBBPS were detected with the assistance of an internal standard with limits of detection (LODs) of 300 and 200 pg/mL, respectively. Moreover, this method was applied to directly identify the residues of TBBPA and TBBPS in milk products, followed by basa catfish and meat. This research may provide a promising approach for the analysis of environmental pollutants in foodstuffs.

Recent advances in the application of magnetic materials for the management of perfluoroalkyl substances in aqueous phases

Perfluoroalkyl substances (PFASs) are a class of artificially synthesised organic compounds extensively used in both industrial and consumer products owing to their unique characteristics. However, their persistence in the environment and potential risk to health have raised serious global concerns. Therefore, developing effective techniques to identify, eliminate, and degrade these pollutants in water are crucial. Owing to their high surface area, magnetic responsiveness, redox sensitivity, and ease of separation, magnetic materials have been considered for the treatment of PFASs from water in recent years. This review provides a comprehensive overview of the recent use of magnetic materials for the detection, removal, and degradation of PFASs in aqueous solutions. First, the use of magnetic materials for sensitive and precise detection of PFASs is addressed. Second, the adsorption of PFASs using magnetic materials is discussed. Several magnetic materials, including iron oxides, ferrites, and magnetic carbon composites, have been explored as efficient adsorbents for PFASs removal from water. Surface modification, functionalization, and composite fabrication have been employed to improve the adsorption effectiveness and selectivity of magnetic materials for PFASs. The final section of this review focuses on the advanced oxidation for PFASs using magnetic materials. This review suggests that magnetic materials have demonstrated considerable potential for use in various environmental remediation applications, as well as in the treatment of PFASs-contaminated water.

In-vial solid-phase extraction of polycyclic aromatic hydrocarbons in drug formulations stored in packaging containing rubber

Polycyclic aromatic hydrocarbons (PAHs) are a class of ubiquitous and persistent organic compounds that are significantly teratogenic, carcinogenic and mutagenic. Rubber stoppers commonly used in sterile formulation packaging materials often contain carbon black as the additive to enhance mechanical strength. However, PAHs may be formed during the production of carbon black, which could cause the drug formulations to be contaminated when contacting with the rubber stopper, and then enter the patient's body. The determination of PAHs in drug formulations is challenging, due to their trace amounts and matrix interference. Therefore, sample pretreatment is necessary and important. In this work, a novel technique, named in-vial solid-phase extraction (IVSPE), was developed for the selective extraction and enrichment of 16 PAHs in pharmaceuticals. The coated sample vial was directly used as the container for the whole process of sample pretreatment. As the solid-phase adsorbent, the coating was prepared by successively modifying the inner surface of a sample vial with polydopamine film and octadecylamine. PAHs could be selectively extracted through π-π stacking interaction and hydrophobic interaction, and then desorbed and enriched by a small amount of organic solvent. After systematic optimization of the coating preparation and the extraction process, the limits of detection and quantification of 16 PAHs were in the range of 0.002-0.60 ng mL^-1 and 0.007-2.00 ng mL^-1, respectively. Good linearities and precision of six repeated injections were obtained. The recoveries at three spiked concentration levels in normal saline were in the range of 62.72-106.90% with the relative standard deviation between 0.83% and 6.78%. Finally, PAHs in normal saline and powders for injection were extracted by established IVSPE, followed by separation and detection with high-performance liquid chromatography with a fluorescence detector and diode array detector (HPLC-FLD/DAD). It is worth noting that the preparation conditions of the adsorbent in the IVSPE method are mild, simple and green. Moreover, IVSPE has the advantages of having few work steps and avoiding the risk of contamination, because no special instrumentation or sample transfer is required. IVSPE could also be used for the pretreatment of multiple samples at the same time, which is beneficial to practical applications.

Surface molecularly imprinted-based matrix-assisted laser desorption/ionization time-of-flight mass spectrometry for highly selective and sensitive direct analysis of paraquat in complicated samples

Herein, a novel surface molecularly imprinted-based matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (SMI-MALDI-TOF MS) method for direct target paraquat (PQ) analysis in complicated samples is reported. Notably, a captured analyte-imprinted material can be directly detected via MALDI-TOF MS by using imprinted material as nanomatrix. Using this strategy, the molecular specific affinity performance of surface molecularly imprinted polymers (SMIPs) and the high-sensitivity detection capability of MALDI-TOF MS was integrated. The introduction of SMI endowed the nanomatrix with the capacity for rebinding the target analyte and ensuring specificity, prevented the interfering organic matrix, and enhanced the analyzing sensitivity. By using paraquat (PQ) as a template, dopamine as a monomer, and covalent organic frameworks with a carboxyl group (C-COFs) as a substrate, polydopamine (PDA) was decorated on C-COFs via a simple self-assembly procedure to generate an analyte-based surface molecularly imprinted polymer (C-COF@PDA-SMIP), which served the dual function of SMIP capturing the target analytes and high-efficiency ionization. Thus, a reliable MALDI-TOF MS detection PQ with high selectivity and sensitivity as well as an interference-free background was achieved. The synthesis and enrichment conditions of C-COF@PDA-SMIPs were optimized, and its structure and property were characterized. Under optimal experimental conditions, the proposed method achieved highly selective and ultrasensitive detection of PQ from 5 to 500 pg mL^-1, and the limit of detection was as low as 0.8 pg mL^-1, which is at least three orders of magnitude lower than that achieved without enrichment. In addition, the specificity of the proposed method was superior to that of C-COFs and nonimprinted polymers. Moreover, this method exhibited reproducibility, stability, and high salt tolerance. Lastly, the practical applicability of the method was successfully verified by analyzing complicated samples, such as grass and orange.

Substrate-Assisted Laser Desorption/Ionization Time-of-Flight Mass Spectrometry of Some Small Biomolecules Using TiO2-Nanotubes: The Effect of Nanotube Diameter and Salt Addition

Substrate-assisted laser desorption/ionization (SALDI) is a kind of soft ionization method that is most suitable for the analysis of low molecular weight analytes when it is coupled with a time-of-flight mass spectrometer. Unlike the conventional matrix-assisted laser desorption/ionization, there is no interference in the SALDI with matrices for the low mass analyte peaks (m/z < 700). The focus of this work is to develop substrates based on nanomaterials to obtain higher sensitivity, better reproducibility, and easier preparation. The mass spectra of some small molecules (capecitabine, hemin, methadone, noscapine, oxycodone, thebaine, malathion, chlorpyrifos, ethion, permethrin, and phosalone) deposited on the TiO₂-nanotube (TiO₂-NTs) plate by the SALDI-TOF-MS technique are reported. The nanotubes are synthesized in different diameter sizes of nanotubes via the anodizing method. The intensity of the analyte peaks and the softness of ionization are optimized by varying the diameter of nanotubes and adding relevant alkali salts to the analytes. In addition, the reproducibility of the signal intensity of analytes is optimized by changing the surface hydrophilicity of the TiO₂-NT plate.

Composite PVK/SLGO As Matrix for MALDI-TOF MS Detection of Small Molecules in Dual-Ion Mode

Currently, most matrices developed for matrix-assisted laser desorption/ionization mass spectrometry (MALDI-TOF MS) for small-molecule detection are only suitable for the positive or negative ion mode and not the dual-ion mode, except for carbon-based nanomaterials. The lone-pair electrons on the N atom in poly n-vinylcarbazole (PVK) can serve as a Lewis base with strong electron-donation effects, which is favorable for negative ion mode detection. The surface of single-layer graphene oxide (SLGO) contains many oxygen atoms in carboxyl and hydroxyl groups that act as Lewis acids and thereby provides favorable protonation sites for positive ion mode detection. In this study, composite PVK/SLGO was prepared by combining the advantages of amorphous PVK and SLGO. PVK/SLGO was tested as a novel matrix for positive- and negative-ion-mode MALDI-TOF MS for the analysis of amino acids, nucleic acid bases, environmental endocrine disruptors, antibiotics, and various small molecules. PVK/SLGO was compared with PVK, SLGO, and commercially available matrices of 9-aminoacridine (9-AA) and α-cyano-4-hydroxycinnamic acid (CHCA). The PVK/SLGO matrix was demonstrated to be suitable for the positive and negative ion modes, exhibiting high signal intensity and detection sensitivity without background interference. The limits of detection of the aforementioned molecules ranged from 0.1 to 0.0001 and 0.01 to 0.0001 mg/mL in the positive and negative ion modes, respectively. The quantitative determination of enrofloxacin in milk was realized using an internal standard method with a linear range of 0.0001-0.1 mg/mL (R ² = 0.9991). Furthermore, the PVK/SLGO matrix exhibited high salt tolerance (up to 1000 mmol/L) and stability over 28 consecutive days. Studies regarding its ionization mechanism revealed that the good performance originates from the combined materials acting synergistically. This study provides a foundation for developing bimodal composite matrices and further expands the scope of PVK/SLGO applications.

The extraction of polycyclic aromatic hydrocarbons from water samples with aromatic-dithiocarbamate modified magnetic nanoparticles

Considering the urgent need for the analysis of trace-level pollutants in water samples, the pre-concentration of micropollutants in water samples has been the focus of extensive research. Among current pretreatment methods, the solid phase extraction (SPE) technique has received enormous attention because of its low cost, ease of operation and high efficiency. In this work, a new adsorbent (Fe₃O₄@Au@DTC NPs) was acquired through modification of Fe₃O₄ nanoparticles (NPs) with gold (Au) and dithiocarbamate (DTC). To investigate their application ability, the adsorbent were utilized as an SPE adsorbent to enrich polycyclic aromatic hydrocarbons in water (PAHs, fluoranthene, pyrene, benzo anthracene, benzo fluoranthene, benzo pyrene). The obtained Fe₃O₄@Au@DTC NPs were confirmed by transmission electron microscope (TEM), X-ray photoelectron spectroscopy (XPS), vibrating sample magnetometer (VSM), and UV-Vis spectrum. Under optimal conditions, the calibration curves were obtained in the range of 10-500 ng L^-1, while the limit of detection (LOD) ranged in 1.17-2.31 ng L^-1. Furthermore, 50 mg of Fe₃O₄@Au@DTC NPs could extract trace PAHs from 500 mL real water samples into 1 mL eluent, and the spiked recoveries of five PAHs in river water and tap water reached 72-106% with relative standard deviations varying between 3.3-5.18%. Through the conversion of amines into DTC, we acquire desiring group modified Fe₃O₄ NPs, which showed great prospects in magnetic solid-phase extraction sphere and environmental field.

Potential of sodium dodecyl sulfate micellar solutions as eluents in magnetic dispersive micro-solid phase extraction with polydopamine-coated magnetite nanoparticles. Application to antidepressant drugs

In this paper, the potential of micellar solutions of the anionic surfactant sodium dodecyl sulfate (SDS) as eluents in dispersive micro-solid phase extraction (D-μSPE) using polydopamine-coated magnetite nanoparticles (Fe₃O₄@PDA NPs) for the extraction and preconcentration of seven basic drugs (bupropion, citalopram, fluoxetine, mianserin, nomifensine, trimipramine, and viloxazine) is explored for the first time (to the best to our knowledge) and compared with conventional hydro-organic eluents. The impact of the sample solution pH, Fe₃O₄@PDA NPs and PDA coating amounts and extraction time on the extraction efficiency (EE), as well as the composition of the eluent on the overall efficiency (OE) are studied. Under the selected experimental conditions (50 mg of Fe₃O₄@PDA NPs, 100 μL of 1 M NH₃, 5 min of extraction time and 0.15 M SDS at pH 2.6 as eluent), EE and OE values were higher than 90% for all compounds and for the most hydrophobic compounds (trimipramine, fluoxetine and mianserin), respectively. The results shown in this paper demonstrate the suitability of Fe₃O₄@PDA NPs as a sorbent for the extraction of antidepressants as well as the advantages of using SDS micellar solutions over classic hydro-organic eluents containing methanol, acetonitrile or tetrahydrofuran. Finally, the stability and reusability of the Fe₃O₄@PDA NPs is proven.

Aptamer-conjugated MoS2 for enrichment and direct detection of small molecules in laser desorption/ionization mass spectrometry

In this work, MoS₂ nanosheets were synthesized by the chemical exfoliation method and then modified with a thiol-terminated aptamer via a simple thiol functionalization route. The as-made nanomaterial was characterized by UV-vis absorption spectroscopy, Fourier transform infrared spectroscopy, X-ray diffraction, and transmission electron microscopy. By integrating the advantages of MoS₂ nanosheets and the recognition ability of aptamers, the functionalized nanomaterial has been successfully employed for simultaneous enrichment and analysis of sulfadimethoxine by matrix-assisted laser desorption/ionization mass spectrometry (MALDI MS). The aptamer-conjugated MoS₂ showed an excellent capture ability to eliminate background signals from the species co-existing in a milk sample. The simplicity of the synthesis method and the excellent performance of aptamer-conjugated MoS₂ make it an ideal candidate for application in selective MS analysis of the target analyte from complex samples.

Amorphous poly-N-vinylcarbazole polymer as a novel matrix for the determination of low molecular weight compounds by MALDI-TOF MS

Traditional matrices for matrix-assisted laser desorption/ionization mass spectrometry (MALDI-TOF MS) are usually crystalline small molecules. The heterogeneous co-crystallization of the analyte and the matrix creates a sweet spot effect and reduces point-to-point reproducibility. In this study, an amorphous poly-N-vinylcarbazole polymer (PVK) was studied as a novel matrix for MALDI-TOF MS to detect various low molecular weight compounds (LMWCs) in the negative ion mode. The PVK achieved excellent matrix action and showed high sensitivity, good salt tolerance, and reproducibility. These results significantly broaden the design rules for new and efficient polymeric MALDI matrices.

Amorphous, highly salt tolerant and stable polymer PVK as a negative ion mode matrix was successfully achieved for the qualitative and quantitative detection of small molecule compounds by MALDI MS.

Modifying superparamagnetic iron oxide and silica nanoparticles surfaces for efficient (MA)LDI-MS analyses of peptides and proteins

RATIONALE

Surface functionalization is considered to be the foundation for developing nanomaterial applications in matrix-assisted laser desorption/ionization mass spectrometry (MALDI-MS) analyses. However, the surface properties of nanostructures can influence their interaction with the analyte and consequently the mass data. In the present study, functionalized nanoparticles (NPs) were used for MALDI-MS and laser desorption/ionization mass spectrometry (LDI-MS) experiments in order to evaluate the effect of the surface properties of NPs on tailoring the intensity of mass signals.

METHODS

Regarding the LDI-MS analyses, the surface of superparamagnetic iron oxide nanoparticles (SPIONs) was coated with nitrosonium tetrafluoroborate, citric acid, nitrodopamine, and gallic acid. Additionally, the SPIONs were applied as a matrix to analyze three small peptides. In the MALDI-MS analyses, silica NPs were selected as co-matrix and functionalized with cysteine, sulfobetaine, and amine alkoxysilanes. Then, the silica NPs were utilized as additives in the MALDI-MS samples of four proteins in a mass range between ~2000 and 60,000 Da.

RESULTS

The results of LDI-MS analyses demonstrated more than one order enhancement in the signal intensity of analytes based on the amount of electrostatic interaction and laser energy absorption by the surface ligands. However, those of MALDI-MS experiments indicated a significant signal improvement when achieving the colloidal stability of silica NPs in the matrix solution.

CONCLUSIONS

Based on the results, the surface properties of NPs affected the (MA)LDI-MS analyses indispensably. Finally, the functionalization of SPIONs represented a new model for the future development of NPs with both affinity and enhanced ionization abilities in mass spectrometry.

Mesoporous polydopamine nanoparticles carrying peptide RL-QN15 show potential for skin wound therapy

BACKGROUND

Skin wound healing remains a considerable clinical challenge, thus stressing the urgent need for the development of new interventions to promote repair. Recent researches indicate that both peptides and nanoparticles may be potential therapies for the treatment of skin wounds.

METHODS

In the current study, the mesoporous polydopamine (MPDA) nanoparticles were prepared and the peptide RL-QN15 that was previously identified from amphibian skin secretions and exhibited significant potential as a novel prohealing agent was successfully loaded onto the MPDA nanoparticles, which was confirmed by results of analysis of scanning electron microscopy and fourier transform infrared spectroscopy. The encapsulation efficiency and sustained release rate of RL-QN15 from the nanocomposites were determined. The prohealing potency of nanocomposites were evaluated by full-thickness injured wounds in both mice and swine and burn wounds in mice.

RESULTS

Our results indicated that, compared with RL-QN15 alone, the prohealing potency of nanocomposites of MPDA and RL-QN15 in the full-thickness injured wounds and burn wounds in mice was increased by up to 50 times through the slow release of RL-QN15. Moreover, the load on the MPDA obviously increased the prohealing activities of RL-QN15 in full-thickness injured wounds in swine. In addition, the obvious increase in the prohealing potency of nanocomposites of MPDA and RL-QN15 was also proved by the results from histological analysis.

CONCLUSIONS

Based on our knowledge, this is the first research to report that the load of MPDA nanoparticles could significantly increase the prohealing potency of peptide and hence highlighted the promising potential of MPDA nanoparticles-carrying peptide RL-QN15 for skin wound therapy.

Hollow polydopamine nanoparticles loading with peptide RL-QN15: a new pro-regenerative therapeutic agent for skin wounds

BACKGROUND

Although the treatments of skin wounds have greatly improved with the increase in therapeutic methods and agents, available interventions still cannot meet the current clinical needs. Therefore, the development of new pro-regenerative therapies remains urgent. Owing to their unique characteristics, both nanomaterials and peptides have provided novel clues for the development of pro-regenerative agents, however, more efforts were still be awaited and anticipated.

RESULTS

In the current research, Hollow polydopamine (HPDA) nanoparticles were synthesized and HPDA nanoparticles loading with RL-QN15 (HPDAlR) that was an amphibian-derived peptide with obvious prohealing activities were prepared successfully. The characterization, biodistribution and clearance of both HPDA nanoparticles and HPDAlR were evaluated, the loading efficiency of HPDA against RL-QN15 and the slow-releasing rate of RL-QN15 from HPDAlR were also determined. Our results showed that both HPDA nanoparticles and HPDAlR exerted no obvious toxicity against keratinocyte, macrophage and mice, and HPDA nanoparticles showed no prohealing potency in vivo and in vitro. Interestingly, HPDAlR significantly enhanced the ability of RL-QN15 to accelerate the healing of scratch of keratinocytes and selectively modulate the release of healing-involved cytokines from macrophages. More importantly, in comparison with RL-QN15, by evaluating on animal models of full-thickness injured skin wounds in mice and oral ulcers in rats, HPDAlR showed significant increasing in the pro-regenerative potency of 50 and 10 times, respectively. Moreover, HPDAlR also enhanced the prohealing efficiency of peptide RL-QN15 against skin scald in mice and full-thickness injured wounds in swine.

CONCLUSIONS

HPDA obviously enhanced the pro-regenerative potency of RL-QN15 in vitro and in vivo, hence HPDAlR exhibited great potential in the development of therapeutics for skin wound healing.

Engineering of nanomaterials for mass spectrometry analysis of biomolecules

Mass spectrometry (MS) based analysis has received intense attention in diverse biological fields. However, direct MS interrogation of target biomolecules in complex biological samples is still challenging, due to the extremely low abundance and poor ionization potency of target biological species. Innovations in nanomaterials create new auxiliary tools for deep and comprehensive MS characterization of biomolecules. More recently, growing research interest has been directed to the compositional and structural engineering of nanomaterials for enriching target biomolecules prior to MS analysis, enhancing the ionization efficiency in MS detection and designing biosensing nanoprobes in sensitive MS readout. In this review, we mainly focus on the recent advances in the engineering of nanomaterials towards their applications in sample pre-treatment, desorption/ionization matrices and ion signal amplification for MS profiling of biomolecules. This review will provide a toolbox of nanomaterials for researchers devoted to developing analytical methods and practical applications in the biological MS field.

Recent advances in colorimetry/fluorimetry-based dual-modal sensing technologies

Tailored to the increasing demands for sensing technologies, the fabrication of dual-modal sensing technologies through combining two signal transduction channels into one method has been proposed and drawn considerable attention. The integration of two sensing signals not only promotes the analytical efficiency with reduced assumption, but also improves the analytical performances with enlarged detection linear range, enhanced accuracy, and boosted application flexibility. The two top-rated output signals for developing dual-modal sensors are colorimetric and fluorescent signals because of their outstanding merits for point of care applications and real-time sensitive sensing. Given the rapid development of material chemistry and nanotechnology, the recent decade has witnessed great advance in colorimetric/fluorimetric signal based dual-modal sensing technologies. The new sensing strategy leads to a broad avenue for various applications in disease diagnosis, environmental monitoring and food safety because of the complementary and synergistic effects of the two output signals. In this state-of-the-art review, we comprehensively summarize different types of colorimetric/fluorimetric dual-modal sensing methods by highlighting representative research in the last 5 years, digging into their sensing methodologies, particularly the working principles of the signal transduction systems. Then, the challenges and future prospects for boosting further development of this research field are discussed.

Polydopamine Functionalized Graphene Oxide as Membrane Nanofiller: Spectral and Structural Studies

High-degree functionalization of graphene oxide (GO) nanoparticles (NPs) using polydopamine (PDA) was conducted to produce polydopamine functionalized graphene oxide nanoparticles (GO-PDA NPs). Aiming to explore their potential use as nanofiller in membrane separation processes, the spectral and structural properties of GO-PDA NPs were comprehensively analyzed. GO NPs were first prepared by the oxidation of graphite via a modified Hummers method. The obtained GO NPs were then functionalized with PDA using a GO:PDA ratio of 1:2 to obtain highly aminated GO NPs. The structural change was evaluated using XRD, FTIR-UATR, Raman spectroscopy, SEM and TEM. Several bands have emerged in the FTIR spectra of GO-PDA attributed to the amine groups of PDA confirming the high functionalization degree of GO NPs. Raman spectra and XRD patterns showed different crystalline structures and defects and higher interlayer spacing of GO-PDA. The change in elemental compositions was confirmed by XPS and CHNSO elemental analysis and showed an emerging N 1s core-level in the GO-PDA survey spectra corresponding to the amine groups of PDA. GO-PDA NPs showed better dispersibility in polar and nonpolar solvents expanding their potential utilization for different purposes. Furthermore, GO and GO-PDA-coated membranes were prepared via pressure-assisted self-assembly technique (PAS) using low concentrations of NPs (1 wt. %). Contact angle measurements showed excellent hydrophilic properties of GO-PDA with an average contact angle of (27.8°).

Magnetic Particles for CTC Enrichment

Simple Summary

For the enrichment of very rare cells, such as Circulating Tumor Cells (CTCs), immunomagnetic enrichment is frequently used. For this purpose, magnetic nanoparticles (MNPs) coated with specific antibodies directed against cancer cells are used. In this review, we look at the properties such a particle needs to have in order to be used successfully, and describe the different methods used in the production of such a particle as well as the methods for their separation. Additionally, an overview is given of the antibodies that could potentially be used for this purpose.

Abstract

Here, we review the characteristics and synthesis of magnetic nanoparticles (MNPs) and place these in the context of their usage in the immunomagnetic enrichment of Circulating Tumor Cells (CTCs). The importance of the different characteristics is explained, the need for a very specific enrichment is emphasized and different (commercial) magnetic separation techniques are shown. As the specificity of an MNP is in a large part dependent on the antibody coated onto the particle, different strategies in the coupling of specific antibodies as well as an overview of the available antibodies is given.

Surface-enhanced laser desorption/ionization mass spectrometry for rapid analysis of organic environmental pollutants by using polydopamine nanospheres as a substrate

Polydopamine nanospheres (PDA) were designed to serve as a new substrate for surface-enhanced desorption/ionization mass spectrometry (SELDI-MS). Compared with conventional organic matrices, the PDA substrate showed superior LDI performance for analyzing a wide variety of environmental pollutants, including polycyclic aromatic hydrocarbons, bisphenols, benzophenones, sulfonamides, perfluorinated compounds and estrogens. Benzoapyrene was used to evaluate the ability of quantitative analysis and its corresponding limit of detection (LOD) of as low as 0.1 ng was achieved. High sensitivity and good reproducibility of PDA-based SELDI-MS allowed us to determine ultratrace PAHs in airborne particulate matters (PM_2.5), and the corresponding concentration of BaP in different PM_2.5 were 5.32, 8.97 and 9.79 ng m^-3. Significantly, PDA exhibits the characteristics of simple synthesis, low cost, non-toxicity and less matrix interference, which provides the possibility for the sensitive analysis of organic small molecule pollutants at low concentrations in complex environmental samples.

Polydopamine-Modified TS-1 Zeolite Framework Nanoparticles as a Matrix for the Analysis of Small Molecules by MALDI-TOF MS

Matrix-assisted laser desorption/ionization mass spectrometry (MALDI-MS) using conventional organic matrices for detection of small molecules has some limitations, such as heterogeneous analyte/matrix co-crystals, as well as interference of matrices in the low-molecular-weight range. In this work, a zeolite framework nanomaterial, TS-1, was applied as a MALDI matrix for the analysis of small molecules by MALDI-MS for the first time. To improve the signal intensity and reproducibility, TS-1 was modified with polydopamine (TS-1@PDA). Using TS-1@PDA as a matrix, organic substances in the low-molecular-weight region such as amino acids, nucleosides, peptides, oligosaccharides, and fatty acids can be detected by MALDI-MS in positive ion mode. Compared with traditional organic matrices like 2,5-dihydroxybenzoic acid (2,5-DHB) and α-cyano-4-hydroxycinnamic acid (CHCA), TS-1@PDA has the advantages including the formation of uniform sample spots, small background interference at low molecular weight, and better salt tolerance. Furthermore, this matrix was employed for the analysis of endogenous glucose in urine samples, and the level of glucose was quantified with a linear range of 0-10 mM (R ² > 0.98). The results demonstrated that TS-1@PDA has the potential to be used as an effective MALDI matrix for the analysis of small molecules in biological samples with excellent reproducibility and moderate sensitivity.

Self-assembled matrix fabricated by Fe-metal organic frameworks and carboxymethyl cellulose for the determination of small molecules by MALDI-TOF MS

A nanoprobe of laser desorption/ionization-time of flight mass spectrometry (LDI-TOF MS) for the determination of small molecules was developed that is based on the composition of Fe-metal organic frameworks (Fe-MOFs) and carboxymethyl cellulose-Na (CMC-Na). This material is a good adsorbent for small molecules via hydrogen bonding and π-interactions; we detected three molecules, dopamine, glyphosate, and pyrene. The detection limits for these compounds are 0.01 mg L^-1, 1.50 μg L^-1, and 0.01 μg L^-1, respectively; the recoveries are 85-117%, 81-127%, and 89-115%, respectively. The relative standard deviations (~ 15%) and coefficients of determination of the calibration plot (~ 0.97) are satisfactory. The applicability of the chip for practical samples is demonstrated by quantifying pyrene in domestic water and polluted lake water; the recoveries are about 90~117% and 85~125% (n = 5), respectively; the RSDs are 9.4% and 13.5%, respectively. Graphical abstract.

FeOOH@Metal-Organic Framework Core-Satellite Nanocomposites for the Serum Metabolic Fingerprinting of Gynecological Cancers

High-throughput metabolic analysis is of significance in diagnostics, while tedious sample pretreatment has largely hindered its clinic application. Herein, we designed FeOOH@ZIF-8 composites with enhanced ionization efficiency and size-exclusion effect for laser desorption/ionization mass spectrometry (LDI-MS)-based metabolic diagnosis of gynecological cancers. The FeOOH@ZIF-8-assisted LDI-MS achieved rapid, sensitive, and selective metabolic fingerprints of the native serum without any enrichment or purification. Further analysis of extracted serum metabolic fingerprints successfully discriminated patients with gynecological cancers (GCs) from healthy controls and also differentiated three major subtypes of GCs. Given the low cost, high-throughput, and easy operation, our approach brings a new dimension to disease analysis and classification.

From Bioinspired Glue to Medicine: Polydopamine as a Biomedical Material

Biological structures have emerged through millennia of evolution, and nature has fine-tuned the material properties in order to optimise the structure-function relationship. Following this paradigm, polydopamine (PDA), which was found to be crucial for the adhesion of mussels to wet surfaces, was hence initially introduced as a coating substance to increase the chemical reactivity and surface adhesion properties. Structurally, polydopamine is very similar to melanin, which is a pigment of human skin responsible for the protection of underlying skin layers by efficiently absorbing light with potentially harmful wavelengths. Recent findings have shown the subsequent release of the energy (in the form of heat) upon light excitation, presenting it as an ideal candidate for photothermal applications. Thus, polydopamine can both be used to (i) coat nanoparticle surfaces and to (ii) form capsules and ultra-small (nano)particles/nanocomposites while retaining bulk characteristics (i.e., biocompatibility, stability under UV irradiation, heat conversion, and activity during photoacoustic imaging). Due to the aforementioned properties, polydopamine-based materials have since been tested in adhesive and in energy-related as well as in a range of medical applications such as for tumour ablation, imaging, and drug delivery. In this review, we focus upon how different forms of the material can be synthesised and the use of polydopamine in biological and biomedical applications.

Research progress on the removal of hazardous perfluorochemicals: A review

Perfluorinated substances are global and ubiquitous pollutants. The persistent organic pollution of perfluorochemicals (PFCs) have drawn attentions worldwide. In view of the current need for sustainable development, many researchers began to study the remediation techniques for PFCs. Due to its unique hydrophobic and oil-phobic characteristics, the requirements for the PFCs removal process are different, so that their remediation techniques are still under continuous exploration. Hence, this review summarized the removal behaviors of various PFCs on different materials which supply a good foundation for future investigations in this field. It is evident from previous literature that every remediation techniques for PFCs has its own advantages. Among various currently evaluated removal methods, adsorption seems to be one of the most commonly used and recognized techniques for PFCs pollution control. Other innovative and promising techniques, such as physical and/or chemical methods, have also been tested for their effectiveness in removing perfluorinated compounds.

Synergistic Effect of Metal-Organic Framework/Gallic Acid in Enhanced Laser Desorption/Ionization Mass Spectrometry

Matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS) has become an indispensable tool for high-throughput analysis of macromolecules, but many challenges still remain in detection of small molecules due to the severe matrix-related background interference in the low-molecular-weight ranges (MW < 700 Da). Herein, a gallic acid (GA)-functionalized zirconium 1,4-dicarboxybenzene metal-organic framework (MOF) (denoted as UiO-66-GA) was designed to serve as a new substrate, and a novel strategy on the basis of the synergistic effect of MOF and GA was developed to enhance the LDI process. In comparison with conventional organic matrices, the UiO-66-GA substrate showed superior LDI performance in the analysis of a wide variety of molecules including amino acids, unsaturated fatty acids, bisphenols (BPs), oligosaccharides, peptides, protein, and polyethylene glycol (PEG) of various average molecular weights from 200 to 10000. Perfluorooctanoic sulfonate (PFOS) was used to evaluate the ability of quantitative analysis, and its corresponding limit of detection as low as 1 fmol was achieved. High sensitivity and good salt tolerance of the UiO-66-GA-assisted LDI-MS were allowed to determine ultratrace PFOS in the spiked human urine and serum samples. In addition, the synergistic mechanism of MOF and GA in the enhanced LDI process was investigated by comprehensively comparing GA- and its analogue-functionalized UiO-66, and the results revealed that two aspects contributed to the enhanced LDI process: (1) an enhancement in the metal-phenolic coordination system of UiO-66-GA promoted laser absorption and energy transfer; (2) introduction of carboxyl and hydroxyl groups of GA onto UiO-66 facilitated the LDI process in both positive and negative ion modes. This work expands a new domain for the MOF applications and provides a promising alternative for various molecule analyses.

Nanotechnology in remediation of water contaminated by poly- and perfluoroalkyl substances: A review

This article gives an overview of nanotechnologies applied in remediation of water contaminated by poly- and perfluoroalkyl substances (PFASs). The use of engineered nanomaterials (ENMs) in physical sorption and photochemical reactions offers a promising solution in PFAS removal because of the high surface area and the associated high reactivities of the ENMs. Modification of carbon nanotubes (CNTs) (e.g., oxidation, applying electrochemical assistance) significantly improves their adsorption rate and capacity for PFASs removal and opens a new door for use of CNTs in environmental remediation. Modified nanosized iron oxides with high adsorption capacity and magnetic property have also been demonstrated to be ideal sorbents for PFASs with great recyclability and thus provide an excellent alternative for PFAS removal under various conditions. Literature shows that PFOA, which is one of the most common PFASs detected at contaminated sites, can be effectively decomposed in the presence of either TiO₂-based, Ga₂O₃-based, or In₂O₃-based nano-photocatalysts under UV irradiation. The decomposition abilities and mechanisms of different nano-photocatalysts are reviewed and compared in this paper. Particularly, the nanosized In₂O₃ photocatalysts have the best potential in PFOA decomposition and the decomposition performance is closely related to the specific surface area and the amount of photogenerated holes on the surfaces of In₂O₃ nanostructures. In addition to detailed review of the published studies, future prospects of using nanotechnology for PFAS remediation are also discussed in this article.

Complementarity of Matrix- and Nanostructure-Assisted Laser Desorption/Ionization Approaches

In recent years, matrix-assisted laser desorption/ionization (MALDI) has become the main tool for the study of biological macromolecules, such as protein nano-machines, especially in the determination of their molecular masses, structure, and post-translational modifications. A key role in the classical process of desorption and ionization of the sample is played by a matrix, usually a low-molecular weight weak organic acid. Unfortunately, the interpretation of mass spectra in the mass range of below m/z 500 is difficult, and hence the analysis of low molecular weight compounds in a matrix-assisted system is an analytical challenge. Replacing the classical matrix with nanomaterials, e.g., silver nanoparticles, allows improvement of the selectivity and sensitivity of spectrometric measurement of biologically important small molecules. Nowadays, the nanostructure-assisted laser desorption/ionization (NALDI) approach complements the classic MALDI in the field of modern bioanalytics. In particular, the aim of this work is to review the recent advances in MALDI and NALDI approaches.

Monodispersed Ag Nanoparticle in Layered Double Hydroxides as Matrix for Laser Desorption/Ionization Mass Spectrometry

Matrix-assisted laser desorption/ionization mass spectrometry (MALDI MS) in the low-molecular-weight (LMW) range is a long-standing challenge because of the fragments from the matrix and the heterogeneity of the matrix-analyte crystals. In this work, a homogeneous film with the monodispersed Ag nanoparticles (Ag NPs) in the confined interlayer of layered double hydroxides (LDHs) has been achieved. The Ag NPs with advantageous optical absorption could realize the energy capture and transfer process, and LDHs with abundant hydroxyl groups are beneficial for the deprotonated reaction. Therefore, the as-prepared film exhibited interference-free deprotonated signals in negative-ion mode with high ionization efficiency. The uniform matrix-analyte spots were constructed through the homogeneous assembly process, contributing to the high reproducibility for both the liquid and gaseous samples. Good linearities were successfully realized in the range from 0.1 μM to 1.0 mM for glucose with the relative standard deviation (RSD) of 3.8%, and 0.2-2.0 mM with the average RSD of 4.5% for psoralen samples, respectively. It is believed that the proposed matrix could exhibit competitive advantages for MALDI detection in the LMW region, which may provide new insight into development for MALDI mass detection.

Size-selected silver nanoparticles for MALDI-TOF mass spectrometry of amyloid-beta peptides

Matrix-assisted laser desorption/ionization mass spectrometry (MALDI-MS) is one of the most efficient mass spectrometric techniques for the analysis of high-molecular-weight compounds with superior selectivity and sensitivity. Common MALDI matrices are low molecular weight (LMW) organics and will therefore produce a large amount of matrix-related ion peaks, which limits the use of MALDI-MS for the detection of LMW molecules. A major breakthrough of this limitation was made by the introduction of surface assisted desorption/ionization techniques, with graphite particles firstly as the matrix, followed by expansion into other types of nanoparticles or nanostructures. However, previous studies failed to address well the optimum size and concentration of Ag NPs to be used as the MALDI matrix. In this study, to explore and compare the efficiency of different sized silver nanoparticles (Ag NPs) as the MALDI matrix for the detection of LMW molecules, three different sized Ag NPs (2.8 ± 1.0, 12.8 ± 3.2 and 44.2 ± 5.0 nm) have been successfully developed as the MALDI time-of-flight MS (MALDI-TOF MS) matrix and amyloid-beta (Aβ) peptides, crucially involved in Alzheimer's disease and a variety of cancers, were chosen as an example of LMW molecules in our MALDI-TOF MS analysis with Ag NPs as matrices. The results showed size-selected MS signals with the smallest (2.8 ± 1.0 nm) Ag NP matrix producing the highest spectral intensities, when compared with other larger sized Ag NP matrices and conventional matrices such as SA and DHB. Furthermore, the optimal concentrations for different sized Ag NPs as matrices were determined as follows: 0.125 nM (2.8 ± 1.0 nm Ag NPs), 0.0625 nM (12.8 ± 3.2 nm Ag NPs), and 0.03125 nM (44.2 ± 5.0 nm Ag NPs), respectively. These results not only corroborated that Ag NPs could act as a very suitable matrix to assist in the desorption/ionization of LMW molecules but also revealed size-selected mass spectrometry signals with smaller Ag NPs as the MALDI matrix bearing more advantages than their larger counterparts. These novel findings paved the way for wider applications of MALDI-MS using Ag NPs as matrices for the analysis of LMW molecules.

Surface Modification of Magnetic Iron Oxide Nanoparticles

Functionalized iron oxide nanoparticles (IONPs) are of great interest due to wide range applications, especially in nanomedicine. However, they face challenges preventing their further applications such as rapid agglomeration, oxidation, etc. Appropriate surface modification of IONPs can conquer these barriers with improved physicochemical properties. This review summarizes recent advances in the surface modification of IONPs with small organic molecules, polymers and inorganic materials. The preparation methods, mechanisms and applications of surface-modified IONPs with different materials are discussed. Finally, the technical barriers of IONPs and their limitations in practical applications are pointed out, and the development trends and prospects are discussed.

Negative ion laser desorption/ionization time-of-flight mass spectrometric analysis of small molecules by using nanostructured substrate as matrices

Matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS) is an excellent analytical technique for rapid and sensitive analysis of macromolecules such as polymers and proteins. However, the main drawback of MALDI-TOF MS is its difficulty to detect small molecules with mass below 700 Da because of the intensive interference from MALDI matrix in the low mass region. In recent years there has been considerable interest in developing matrix-free laser desorption/ionization by using nanostructured substrates to substitute the conventional organic matrices, which is often referred as surface-assisted laser desorption/ionization time-of-flight mass spectrometry (SALDI-TOF MS). Despite these attractive features, most of the current SALDI-TOF MS for the analysis of small molecules employ positive ion mode, which is subjected to produce multiple alkali metal adducts, and thus increases the complexity of the analysis. Different from the complicated adducts produced in positive ion mode, mass spectra obtained in negative ion mode are featured by deprotonated ion peaks without matrix interference, which simplifies the interpretation of mass spectra and detection of unknown. In this review, we critically survey recent advances in nanostructured substrates for negative ion LDI-TOF MS analysis of small molecules in the last 5 years. Special emphasis is placed on the preparation of the nanostructured substrates and the results achieved in negative ion SALDI-MS. In addition, a variety of promising applications including environmental, biological, and clinical analysis are introduced. The ionization mechanism of negative ionization is briefly discussed.

Disposable MoS2-Arrayed MALDI MS Chip for High-Throughput and Rapid Quantification of Sulfonamides in Multiple Real Samples

In this work, we demonstrate, for the first time, the development of a disposable MoS₂-arrayed matrix-assisted laser desorption/ionization mass spectrometry (MALDI MS) chip combined with an immunoaffinity enrichment method for high-throughput, rapid, and simultaneous quantitation of multiple sulfonamides (SAs). The disposable MALDI MS chip was designed and fabricated by MoS₂ array formation on a commercial indium tin oxide (ITO) glass slide. A series of SAs were analyzed, and clear deprotonated signals were obtained in negative-ion mode. Compared with MoS₂-arrayed commercial steel plate, the prepared MALDI MS chip exhibited comparable LDI efficiency, providing a good alternative and disposable substrate for MALDI MS analysis. Furthermore, internal standard (IS) was previously deposited onto the MoS₂ array to simplify the experimental process for MALDI MS quantitation. 96 sample spots could be analyzed within 10 min in one single chip to perform quantitative analysis, recovery studies, and real foodstuff detection. Upon targeted extraction and enrichment by antibody conjugated magnetic beads, five SAs were quantitatively determined by the IS-first method with the linear range of 0.5-10 ng/mL ( R² > 0.990). Good recoveries and repeatability were obtained for spiked pork, egg, and milk samples. SAs in several real foodstuffs were successfully identified and quantified. The developed method may provide a promising tool for the routine analysis of antibiotic residues in real samples.

Preconcentration and Determination of Perfluoroalkyl Substances (PFASs) in Water Samples by Bamboo Charcoal-Based Solid-Phase Extraction Prior to Liquid Chromatography-Tandem Mass Spectrometry

In this work, bamboo charcoal was used as solid-phase extraction adsorbent for the enrichment of six perfluoroalkyl acids (PFAAs) in environmental water samples before liquid chromatography–tandem mass spectrometry analysis. The specific porous structure, high specific surface area, high porosity, and stability of bamboo charcoal were characterized. Several experimental parameters which considerably affect extraction efficiency were investigated and optimized in detail. The experimental data exhibited low limits of detection (LODs) (0.01–1.15 ng/L), wide linear range (2–3 orders of magnitude and R ≥ 0.993) within the concentration range of 0.1–1000 ng/L, and good repeatability (2.7–5.0%, n = 5 intraday and 4.8–8.3%, n = 5 interday) and reproducibility (5.3–8.0%, n = 3). Bamboo charcoal was successfully used for the enrichment and determination of PFAAs in real environmental water samples. The bamboo charcoal-based solid-phase extraction coupled with liquid chromatography–tandem mass spectrometry analysis possessed great potential in the determination of trace PFAA levels in environmental water samples.

Recent progress in the biomedical applications of polydopamine nanostructures

Polydopamine is a dark brown-black insoluble biopolymer produced by autoxidation of dopamine. Although its structure and polymerization mechanism have not been fully understood, there has been a rapid growth in the synthesis and applications of polydopamine nanostructures in biomedical fields such as drug delivery, photothermal therapy, bone and tissue engineering, and cell adhesion and patterning, as well as antimicrobial applications. This article is dedicated to reviewing some of the recent polydopamine developments in these biomedical fields. Firstly, the polymerization mechanism is introduced with a discussion of the factors that influence the polymerization process. The discussion is followed by the introduction of various forms of polydopamine nanostructures and their recent applications in biomedical fields, especially in drug delivery. Finally, the review is summarized followed by brief comments on the future prospects of polydopamine.

Plasmonic Janus hybrids for the detection of small metabolites

Janus hybrids with amphiphilic structures were used for the sensitive detection of small metabolites.