A Near-Infrared Mechanically Switchable Elastomeric Film as a Dynamic Cell Culture Substrate

Commercial static cell culture substrates can usually not change their physical properties over time, resulting in a limited representation of the variation in biomechanical cues in vivo. To overcome this limitation, approaches incorporating gold nanoparticles to act as transducers to external stimuli have been employed. In this work, gold nanorods were embedded in an elastomeric matrix and used as photothermal transducers to fabricate biocompatible light-responsive substrates. The nanocomposite films analysed by lock-in thermography and nanoindentation show a homogeneous heat distribution and a greater stiffness when irradiated with NIR light. After irradiation, the initial stiffness values were recovered. In vitro experiments performed during NIR irradiation with NIH-3T3 fibroblasts demonstrated that these films were biocompatible and cells remained viable. Cells cultured on the light stiffened nanocomposite exhibited a greater proliferation rate and stronger focal adhesion clustering, indicating increased cell-surface binding strength.

Substrate stiffness reduces particle uptake by epithelial cells and macrophages in a size-dependent manner through mechanoregulation

Cells continuously exert forces on their environment and respond to changes in mechanical forces by altering their behaviour. Many pathologies such as cancer and fibrosis are hallmarked by dysregulation in the extracellular matrix, driving aberrant behaviour through mechanotransduction pathways. We demonstrate that substrate stiffness can be used to regulate cellular endocytosis of particles in a size-dependent fashion. Culture of A549 epithelial cells and J774A.1 macrophages on polystyrene/glass (stiff) and polydimethylsiloxane (soft) substrates indicated that particle uptake is increased up to six times for A549 and two times for macrophages when cells are grown in softer environments. Furthermore, we altered surface characteristics through the attachment of submicron-sized particles as a method to locally engineer substrate stiffness and topography to investigate the biomechanical changes which occurred within adherent epithelial cells, i.e. characterization of A549 cell spreading and focal adhesion maturation. Consequently, decreasing substrate rigidity and particle-based topography led to a reduction of focal adhesion size. Moreover, expression levels of Yes-associated protein were found to correlate with the degree of particle endocytosis. A thorough appreciation of the mechanical cues may lead to improved solutions to optimize nanomedicine approaches for treatment of cancer and other diseases with abnormal mechanosignalling.

Intracellular gold nanoparticles influence light scattering and facilitate amplified spontaneous emission generation

Generation of amplified stimulated emission inside mammalian cells has paved the way for a novel bioimaging and cell sensing approach. Single cells carrying gain media (e.g., fluorescent molecules) are placed inside an optical cavity, allowing the production of intracellular laser emission upon sufficient optical pumping. Here, we investigate the possibility to trigger another amplified emission phenomenon (i.e., amplified spontaneous emission or ASE) inside two different cell types, namely macrophage and epithelial cells from different species and tissues, in the presence of a poorly reflecting cavity. Furthermore, the resulting ASE properties can be enhanced by introducing plasmonic nanoparticles. The presence of gold nanoparticles (AuNPs) in rhodamine 6G-labeled A549 epithelial cells results in higher intensity and lowered ASE threshold in comparison to cells without nanoparticles, due to the effect of plasmonic field enhancement. An increase in intracellular concentration of AuNPs in rhodamine 6G-labeled macrophages is, however, responsible for the twofold increase in the ASE threshold and a reduction in the ASE intensity, dominantly due to a suppressed in and out-coupling of light at high nanoparticle concentrations.

Cellular lasers for cell imaging and biosensing

The possibility to produce laser action involving biomaterials, in particular (single) biological cells, has fostered the development of cellular lasers as a novel approach in biophotonics. In this respect, cells that are engineered to carry gain medium (e.g., fluorescent dyes or proteins) are placed inside an optical cavity (i.e., typically a sandwich of highly reflective mirrors), allowing the generation of stimulated emission upon sufficient optical pumping. In another scenario, micron-sized optical resonators supporting whispering-gallery mode (WGM) or semiconductor-based laser probes can be internalized by the cells and support light amplification. This review summarizes the recent advances in the fields of biolasers and cellular lasers, and most importantly, highlights their potential applications in the fields of in vitro and in vivo cell imaging and analysis. They include biosensing (e.g., in vitro detection of sodium chloride (NaCl) concentration), cancer cell imaging, laser-emission-based microscope, cell tracking, cell distinction study, and tissue contraction monitoring in zebrafish. Lastly, several fundamental issues in developing cellular lasers including laser probe fabrication, biocompatibility of the system, and alteration of local refractive index of optical cavities due to protein absorption or probe aggregation are described. Cellular lasers are foreseen as a promising tool to study numerous biological and biophysical phenomena. STATEMENT OF SIGNIFICANCE: Biolasers are generation of laser involving biological materials. Biomaterials, including single cells, can be engineered to incorporate laser probes or fluorescent proteins or fluorophores, and the resulting light emission can be coupled to optical resonator, allowing generation of cellular laser emission upon optical pumping. Unlike fluorescence, this stimulated emission is very sensitive and is capable of detecting small alterations in the optical property of the cells and their environment. In this review, recent development and applications of cellular lasers in the fields of in vitro and in vivo cell imaging, cell tracking, biosensing, and cell/tissue analysis are highlighted. Several challenges in developing cellular lasers including probe fabrication and biocompatibility as well as alteration of cellular environment are explained.

Aligned and Oriented Collagen Nanocomposite Fibers as Substrates to Activate Fibroblasts

Purified collagen possesses weak mechanical properties, hindering its broad application in tissue engineering. Strategies based on manipulating the hydrogel to induce fiber formation or incorporate nanomaterials have been proposed to overcome this issue. Herein, we use a microfluidic device to fabricate, for the first time, collagen hydrogels with aligned and oriented fibers doped with gold nanoparticles and carbon nanotubes. Results based on rheology, atomic force microscopy, and scanning electron microscopy reveal the formation of aligned and oriented collagen fibers possessing greater rigidity and stiffness on the doped hydrogels in comparison with native collagen. The mechanical properties of the hydrogels increased with the nanomaterial loading percentage and the stiffest formulations were those prepared in the presence of carbon nanotubes. We further evaluate the in vitro response of NIH-3T3 fibroblasts to the change in stiffness. The cells were found to be viable on all substrates with directional cell growth observed for the carbon nanotube-doped collagen fibers. No significant differences in the cell area, aspect ratio, and intensification of focal adhesions driven by the increase in stiffness were noted. Nonetheless, fibroblast proliferation and secretion of TGF-β1 were greater on the hydrogels doped with carbon nanotubes. This nanomaterial-collagen composite provides unique features for cell and tissue substrate applications.

Particle Stiffness and Surface Topography Determine Macrophage-Mediated Removal of Surface Adsorbed Particles

Cellular surface recognition and behavior are driven by a host of physical and chemical features which have been exploited to influence particle-cell interactions. Mechanical and topographical cues define the physical milieu which plays an important role in defining a range of cellular activities such as material recognition, adhesion, and migration through cytoskeletal organization and signaling. In order to elucidate the effect of local mechanical and topographical features generated by the adsorption of particles to an underlying surface on primary human monocyte-derived macrophages (MDM), a series of poly(N-isopropylacrylamide) (pNIPAM) particles with differing rigidity are self-assembled to form a defined particle-decorated surface. Assembly of particle-decorated surfaces is facilitated by modification of the underlying glass to possess a positive charge through functionalization using 3-aminopropyltriethoxysilane (APTES) or coating with poly(L-lysine) (PLL). MDMs are noted to preferentially remove particles with higher degrees of crosslinking (stiffer) than those with lower degrees of crosslinking (softer). Alterations to the surface density of particles enabled a greater area of the particle-decorated surface to be cleared. Uniquely, the impact of particle adsorption is evinced to have a direct impact on topographical recognition of the surface, suggesting a novel approach for controllably affecting cell-surface recognition and response.

Design of Perfused PTFE Vessel-Like Constructs for In Vitro Applications

Tissue models mimic the complex 3D structure of human tissues, which allows the study of pathologies and the development of new therapeutic strategies. The introduction of perfusion overcomes the diffusion limitation and enables the formation of larger tissue constructs. Furthermore, it provides the possibility to investigate the effects of hematogenously administered medications. In this study, the applicability of hydrophilic polytetrafluoroethylene (PTFE) membranes as vessel-like constructs for further use in perfused tissue models is evaluated. The presented approach allows the formation of stable and leakproof tubes with a mean diameter of 654.7 µm and a wall thickness of 84.2 µm. A polydimethylsiloxane (PDMS) chip acts as a perfusion bioreactor and provides sterile conditions. As proof of concept, endothelial cells adhere to the tube's wall, express vascular endothelial cadherin (VE-cadherin) between neighboring cells, and resist perfusion at a shear rate of 0.036 N m^-2 for 48 h. Furthermore, the endothelial cell layer delays significantly the diffusion of fluorescently labeled molecules into the surrounding collagen matrix and leads to a twofold reduced diffusion velocity. This approach represents a cost-effective alternative to introduce stable vessel-like constructs into tissue models, which allows adapting the surrounding matrix to the tissue properties in vivo.

Understanding selectivity of metabolic labelling and click-targeting in multicellular environments as a route to tissue selective drug delivery

Cancer cells generally exhibit higher metabolic demands relative to that of normal tissue cells. This offers great possibilities to exploit metabolic glycoengineering in combination with bio-orthogonal chemistry reactions to achieve tumour site-targeted therapeutic delivery. This work addresses the selectivity of metabolic glycan labelling in diseased (i.e., cancer) versus normal cells grown in a multicellular environment. Dibenzocylooctyne (DBCO)-bearing acetylated-d-mannosamine (Ac4ManNDBCO) was synthesised to metabolically label three different types of cell lines originating from the human lung tissues: A549 adenocarcinomic alveolar basal epithelial cells, MeT5A non-cancerous mesothelial cells, and MRC5 non-cancerous fibroblasts. These cell lines displayed different labelling sensitivity, which trended with their doubling time in the following order: A549 ≈ MeT5A > MRC5. The higher metabolic labelling efficiency inherently led to a higher extent of specific binding and accumulation of the clickable N3-conjugated gold nanoparticles (N3-AuNps, core diameter = 30 nm) in the DBCO-glycan modified A549 and MeT5A cells, but to a less prominent effect in MRC5 cells. These findings demonstrate that relative rates of cell metabolism can be exploited using metabolic labelling to recruit nanotherapeutics whilst minimising non-specific targeting of surrounding tissues.

Patient-derived and artificial ascites have minor effects on MeT-5A mesothelial cells and do not facilitate ovarian cancer cell adhesion

The presence of ascites in the peritoneal cavity leads to morphological and functional changes of the peritoneal mesothelial cell layer. Cells loose cell-cell interactions, rearrange their cytoskeleton, activate the production of fibronectin, and change their cell surface morphology in a proinflammatory environment. Moreover, ovarian cancer cell adhesion has been shown to be facilitated by these changes due to increased integrin- and CD44-mediated binding sites. In this study, the biological responsiveness of the human pleural mesothelial cell line MeT-5A to patient-derived and artificial ascites was studied in vitro and adhesion of ovarian cancer cells, i.e. SKOV-3 cells, investigated. Changes were mainly observed in cells exposed to artificial ascites containing higher cytokine concentrations than patient-derived ascites. Interestingly, reduced cell-cell interactions were already observed in untreated MeT-5A cells and effects on tight junction protein expression and permeability upon exposure to ascites were minor. Ascites induced upregulation of CDC42 effector protein 2 expression, which affects stress fiber formation, however significant F-actin reorganization was not observed. Moreover, fibronectin production remained unchanged. Analysis of mesothelial cell surface characteristics showed upregulated expression of intercellular adhesion molecule 1, slightly increased hyaluronic acid secretion and decreased microvillus expression upon exposure to ascites. Nevertheless, the observed changes were not sufficient to facilitate adhesion of SKOV-3 cells on MeT-5A cell layer. This study revealed that MeT-5A cells show a reduced biological responsiveness to the presence of ascites, in contrast to published studies on primary human peritoneal mesothelial cells.

Collagen-rich omentum is a premetastatic niche for integrin α2-mediated peritoneal metastasis

The extracellular matrix (ECM) plays critical roles in tumor progression and metastasis. However, the contribution of ECM proteins to early metastatic onset in the peritoneal cavity remains unexplored. Here, we suggest a new route of metastasis through the interaction of integrin alpha 2 (ITGA2) with collagens enriched in the tumor coinciding with poor outcome in patients with ovarian cancer. Using multiple gene-edited cell lines and patient-derived samples, we demonstrate that ITGA2 triggers cancer cell adhesion to collagen, promotes cell migration, anoikis resistance, mesothelial clearance, and peritoneal metastasis in vitro and in vivo. Mechanistically, phosphoproteomics identify an ITGA2-dependent phosphorylation of focal adhesion kinase and mitogen-activated protein kinase pathway leading to enhanced oncogenic properties. Consequently, specific inhibition of ITGA2-mediated cancer cell-collagen interaction or targeting focal adhesion signaling may present an opportunity for therapeutic intervention of metastatic spread in ovarian cancer.

An In Vitro Lung System to Assess the Proinflammatory Hazard of Carbon Nanotube Aerosols

In vitro three-dimensional (3D) lung cell models have been thoroughly investigated in recent years and provide a reliable tool to assess the hazard associated with nanomaterials (NMs) released into the air. In this study, a 3D lung co-culture model was optimized to assess the hazard potential of multiwalled carbon nanotubes (MWCNTs), which is known to provoke inflammation and fibrosis, critical adverse outcomes linked to acute and prolonged NM exposure. The lung co-cultures were exposed to MWCNTs at the air-liquid interface (ALI) using the VITROCELL^® Cloud system while considering realistic occupational exposure doses. The co-culture model was composed of three human cell lines: alveolar epithelial cells (A549), fibroblasts (MRC-5), and macrophages (differentiated THP-1). The model was exposed to two types of MWCNTs (Mitsui-7 and Nanocyl) at different concentrations (2–10 μg/cm²) to assess the proinflammatory as well as the profibrotic responses after acute (24 h, one exposure) and prolonged (96 h, repeated exposures) exposure cycles. The results showed that acute or prolonged exposure to different concentrations of the tested MWCNTs did not induce cytotoxicity or apparent profibrotic response; however, suggested the onset of proinflammatory response.

Use of EpiAlveolar Lung Model to Predict Fibrotic Potential of Multiwalled Carbon Nanotubes

Expansion in production and commercial use of nanomaterials increases the potential human exposure during the lifecycle of these materials (production, use, and disposal). Inhalation is a primary route of exposure to nanomaterials; therefore it is critical to assess their potential respiratory hazard. Herein, we developed a three-dimensional alveolar model (EpiAlveolar) consisting of human primary alveolar epithelial cells, fibroblasts, and endothelial cells, with or without macrophages for predicting long-term responses to aerosols. Following thorough characterization of the model, proinflammatory and profibrotic responses based on the adverse outcome pathway concept for lung fibrosis were assessed upon repeated subchronic exposures (up to 21 days) to two types of multiwalled carbon nanotubes (MWCNTs) and silica quartz particles. We simulate occupational exposure doses for the MWCNTs (1-30 μg/cm²) using an air-liquid interface exposure device (VITROCELL Cloud) with repeated exposures over 3 weeks. Specific key events leading to lung fibrosis, such as barrier integrity and release of proinflammatory and profibrotic markers, show the responsiveness of the model. Nanocyl induced, in general, a less pronounced reaction than Mitsui-7, and the cultures with human monocyte-derived macrophages (MDMs) showed the proinflammatory response at later time points than those without MDMs. In conclusion, we present a robust alveolar model to predict inflammatory and fibrotic responses upon exposure to MWCNTs.

Use of EpiAlveolar Lung Model to Predict Fibrotic Potential of Multiwalled Carbon Nanotubes

Expansion in production and commercial use of nanomaterials increases the potential human exposure during the lifecycle of these materials (production, use, and disposal). Inhalation is a primary route of exposure to nanomaterials; therefore it is critical to assess their potential respiratory hazard. Herein, we developed a three-dimensional alveolar model (EpiAlveolar) consisting of human primary alveolar epithelial cells, fibroblasts, and endothelial cells, with or without macrophages for predicting long-term responses to aerosols. Following thorough characterization of the model, proinflammatory and profibrotic responses based on the adverse outcome pathway concept for lung fibrosis were assessed upon repeated subchronic exposures (up to 21 days) to two types of multiwalled carbon nanotubes (MWCNTs) and silica quartz particles. We simulate occupational exposure doses for the MWCNTs (1-30 μg/cm²) using an air-liquid interface exposure device (VITROCELL Cloud) with repeated exposures over 3 weeks. Specific key events leading to lung fibrosis, such as barrier integrity and release of proinflammatory and profibrotic markers, show the responsiveness of the model. Nanocyl induced, in general, a less pronounced reaction than Mitsui-7, and the cultures with human monocyte-derived macrophages (MDMs) showed the proinflammatory response at later time points than those without MDMs. In conclusion, we present a robust alveolar model to predict inflammatory and fibrotic responses upon exposure to MWCNTs.

From Bioinspired Glue to Medicine: Polydopamine as a Biomedical Material

Biological structures have emerged through millennia of evolution, and nature has fine-tuned the material properties in order to optimise the structure-function relationship. Following this paradigm, polydopamine (PDA), which was found to be crucial for the adhesion of mussels to wet surfaces, was hence initially introduced as a coating substance to increase the chemical reactivity and surface adhesion properties. Structurally, polydopamine is very similar to melanin, which is a pigment of human skin responsible for the protection of underlying skin layers by efficiently absorbing light with potentially harmful wavelengths. Recent findings have shown the subsequent release of the energy (in the form of heat) upon light excitation, presenting it as an ideal candidate for photothermal applications. Thus, polydopamine can both be used to (i) coat nanoparticle surfaces and to (ii) form capsules and ultra-small (nano)particles/nanocomposites while retaining bulk characteristics (i.e., biocompatibility, stability under UV irradiation, heat conversion, and activity during photoacoustic imaging). Due to the aforementioned properties, polydopamine-based materials have since been tested in adhesive and in energy-related as well as in a range of medical applications such as for tumour ablation, imaging, and drug delivery. In this review, we focus upon how different forms of the material can be synthesised and the use of polydopamine in biological and biomedical applications.

Lipid nanoparticles biocompatibility and cellular uptake in a 3D human lung model

Aim: Design nanostructured lipid carriers (NLC) to facilitate drug delivery to tuberculosis-infected areas, exploiting macrophage mannose receptors and assess their uptake in a 3D human lung model. Materials & methods: NLCs and mannosylated-NLCs were synthetized and characterized. Their uptake and biocompatibility were tested in a 3D human lung model. Results: The formulations have appropriate size (170–202 nm) and morphology for lung deposition. Cell membrane integrity was maintained and no significant pro-inflammatory cytokine (IL-1β, IL-8 and TNF-α) secretion or morphological changes were observed 24 h post nanoparticles exposure. NLCs and mannosylated NLCs were distributed in the apical side of the lung tissue, both in macrophages and in epithelial cells. Conclusion: NLCs are biocompatible carriers and can be used for pulmonary drug delivery.

Reduction of Nanoparticle Load in Cells by Mitosis but Not Exocytosis

The long-term fate of biomedically relevant nanoparticles (NPs) at the single cell level after uptake is not fully understood yet. We report that lysosomal exocytosis of NPs is not a mechanism to reduce the particle load. Biopersistent NPs such as nonporous silica and gold remain in cells for a prolonged time. The only reduction of the intracellular NP number is observed via cell division, e.g., mitosis. Additionally, NP distribution after cell division is observed to be asymmetrical, likely due to the inhomogeneous location and distribution of the NP-loaded intracellular vesicles in the mother cells. These findings are important for biomedical and hazard studies as the NP load per cell can vary significantly. Furthermore, we highlight the possibility of biopersistent NP accumulation over time within the mononuclear phagocyte system.

Polydopamine/Transferrin Hybrid Nanoparticles for Targeted Cell-Killing

Polydopamine can form biocompatible particles that convert light into heat. Recently, a protocol has been optimized to synthesize polydopamine/protein hybrid nanoparticles that retain the biological function of proteins, and combine it with the stimuli-induced heat generation of polydopamine. We have utilized this novel system to form polydopamine particles, containing transferrin (PDA/Tf). Mouse melanoma cells, which strongly express the transferrin receptor, were exposed to PDA/Tf nanoparticles (NPs) and, subsequently, were irradiated with a UV laser. The cell death rate was monitored in real-time. When irradiated, the melanoma cells exposed to PDA/Tf NPs underwent apoptosis, faster than the control cells, pointing towards the ability of PDA/Tf to mediate UV-light-induced cell death. The system was also validated in an organotypic, 3D-printed tumor spheroid model, comprising mouse melanoma cells, and the exposure and subsequent irradiation with UV-light, yielded similar results to the 2D cell culture. The process of apoptosis was found to be targeted and mediated by the lysosomal membrane permeabilization. Therefore, the herein presented polydopamine/protein NPs constitute a versatile and stable system for cancer cell-targeting and photothermal apoptosis induction.

Revealing the Role of Epithelial Mechanics and Macrophage Clearance during Pulmonary Epithelial Injury Recovery in the Presence of Carbon Nanotubes

Wound healing assays are extensively used to study tissue repair mechanisms; they are typically performed by means of physical (i.e., mechanical, electrical, or optical) detachment of the cells in order to create an open space in which live cells can lodge. Herein, an advanced system based on extensive photobleaching-induced apoptosis; providing a powerful tool to understand the repair response of lung epithelial tissue, consisting of a small injury area where apoptotic cells are still intact, is developed. Notably, the importance of epithelial mechanics and the presence of macrophages during the repair can be understood. The findings reveal that individual epithelial cells are able to clear the apoptotic cells by applying a pushing force, whilst macrophages actively phagocytose the dead cells to create an empty space. It is further shown that this repair mechanism is hampered when carbon nanotubes (CNTs) are introduced: formation of aberrant (i.e., thickening) F-actins, maturation of focal adhesion, and increase in traction force leading to retardation in cell migration are observed. The results provide a mechanistic view of how CNTs can interfere with lung repair.

A novel sample holder for 4D live cell imaging to study cellular dynamics in complex 3D tissue cultures

Three dimensional (3D) co-cultures to mimic cellular dynamics have brought significant impacts in tissue engineering approaches for biomedical research. Herein, we present a novel sample holder combined with time-lapse fluorescence imaging technique, referred as 4D live cell imaging, allowing direct visualization of various cells up to 24 hours. We further extended our approach to monitor kinetics and dynamics of particle uptake by cells and translocation across tissue membranes.

Nanoparticle-Cell Interaction: A Cell Mechanics Perspective

Progress in the field of nanoparticles has enabled the rapid development of multiple products and technologies; however, some nanoparticles can pose both a threat to the environment and human health. To enable their safe implementation, a comprehensive knowledge of nanoparticles and their biological interactions is needed. In vitro and in vivo toxicity tests have been considered the gold standard to evaluate nanoparticle safety, but it is becoming necessary to understand the impact of nanosystems on cell mechanics. Here, the interaction between particles and cells, from the point of view of cell mechanics (i.e., bionanomechanics), is highlighted and put in perspective. Specifically, the ability of intracellular and extracellular nanoparticles to impair cell adhesion, cytoskeletal organization, stiffness, and migration are discussed. Furthermore, the development of cutting-edge, nanotechnology-driven tools based on the use of particles allowing the determination of cell mechanics is emphasized. These include traction force microscopy, colloidal probe atomic force microscopy, optical tweezers, magnetic manipulation, and particle tracking microrheology.

Biodistribution of single and aggregated gold nanoparticles exposed to the human lung epithelial tissue barrier at the air-liquid interface

Background

The lung represents the primary entry route for airborne particles into the human body. Most studies addressed possible adverse effects using single (nano)particles, but aerosolic nanoparticles (NPs) tend to aggregate and form structures of several hundreds nm in diameter, changing the physico-chemical properties and interaction with cells. Our aim was to investigate how aggregation might affect the biodistribution; cellular uptake and translocation over time of aerosolized NPs at the air-blood barrier interface using a multicellular lung system.

Results

Model gold nanoparticles (AuNPs) were engineered and well characterized to compare single NPs with aggregated NPs with hydrodynamic diameter of 32 and 106 nm, respectively. Exposures were performed by aerosolization of the particles onto the air-liquid interface of a three dimensional (3D) lung model. Particle deposition, cellular uptake and translocation kinetics of single and aggregated AuNPs were determined for various concentrations, (30, 60, 150 and 300 ng/cm²) and time points (4, 24 and 48 h) using transmission electron microscopy and inductively coupled plasma optical emission spectroscopy. No apparent harmful effect for single and aggregated AuNPs was observed by lactate dehydrogenase assay, nor pro-inflammation response by tumor necrosis factor α assessment. The cell layer integrity was also not impaired. The bio-distribution revealed that majority of the AuNPs, single or aggregated, were inside the cells, and only a minor fraction, less than 5%, was found on the basolateral side. No significant difference was observed in the translocation rate. However, aggregated AuNPs showed a significantly faster cellular uptake than single AuNPs at the first time point, i.e. 4 h.

Conclusions

Our studies revealed that aggregated AuNPs showed significantly faster cellular uptake than single AuNPs at the first time point, i.e. 4 h, but the uptake rate was similar at later time points. In addition, aggregation did not affect translocation rate across the lung barrier model since similar translocation rates were observed for single as well as aggregated AuNPs.

Electronic supplementary material

The online version of this article (10.1186/s12989-017-0231-3) contains supplementary material, which is available to authorized users.

Glucose-Modified Silicon Nanoparticles for Cellular Imaging

Luminescent silicon nanoparticles have recently attracted attention due to their remarkable stability, covalent functionalisation and tunable photoemission properties. Owing to their biocompatibility, low toxicity, and the small particle size that can be achieved by different synthetic approaches, these nanomaterials are candidates as cellular probes in the field of bioimaging, and potentially for in vivo applications. Tailoring the surface of the particles with active biomolecules such as sugar moieties can be an interesting strategy to increase the kinetics of internalisation or to vary the localisation of nanosystems in living cells. In this study, we synthesised and modified ultrasmall silicon nanoparticles with glucose covalently linked on their surface. Moreover, by varying the ratio between the amount of silicon nanoparticles and the saccharide groups, the amount of glucose, as a capping moiety, can be well controlled. FTIR spectroscopy, NMR spectroscopy, zeta potential measurements and anisotropy decay analysis confirmed the covalent binding of glucose to the nanoparticles. The photophysical behaviour of the surface-functionalised silicon quantum dots was not significantly different to that of the unmodified nanoparticles. In vitro studies demonstrated faster internalisation of the glucose-functionalised nanoparticles into HeLa cells. Different localisation and uptake kinetics of the glucose-modified particles compared to the unmodified particles are discussed in order to reveal the role played by the sugar molecules.

Glyco-functionalized dinuclear rhenium(i) complexes for cell imaging

New luminescent glycosilated rhenium complexes were synthesized and evaluated as dyes for optical imaging.

Neutral N^C^N terdentate luminescent Pt(II) complexes: their synthesis, photophysical properties, and bio-imaging applications

An emerging field regarding N^C^N terdentate Pt(II) complexes is their application as luminescent labels for bio-imaging. In fact, phosphorescent Pt complexes possess many advantages such as a wide emission color tunability, a better stability towards photo- and chemical degradation, a very large Stokes shift, and long-lived luminescent excited states with lifetimes typically two to three orders of magnitude longer than those of classic organic fluorophores. Here, we describe the synthesis and photophysical characterization of three new neutral N^C^N terdentate cyclometallated Pt complexes as long-lived bio-imaging probes. The novel molecular probes bear hydrophilic (oligo-)ethyleneglycol chains of various lengths to increase their water solubility and bio-compatibility and to impart amphiphilic nature to the molecules. The complexes are characterized by a high cell permeability and a low cytotoxicity, with an internalization kinetics that depends on both the length of the ethyleneglycol chain and the ancillary ligand.

Breakable Hybrid Organosilica Nanocapsules for Protein Delivery

The direct delivery of specific proteins to live cells promises a tremendous impact for biological and medical applications, from therapeutics to genetic engineering. However, the process mostly involves tedious techniques and often requires extensive alteration of the protein itself. Herein we report a straightforward approach to encapsulate native proteins by using breakable organosilica matrices that disintegrate upon exposure to a chemical stimulus. The biomolecule-containing capsules were tested for the intracellular delivery of highly cytotoxic proteins into C6 glioma cells. We demonstrate that the shell is broken, the release of the active proteins occurs, and therefore our hybrid architecture is a promising strategy to deliver fragile biomacromolecules into living organisms.

Combined Delivery of Temozolomide and Anti-miR221 PNA Using Mesoporous Silica Nanoparticles Induces Apoptosis in Resistant Glioma Cells

Mesoporous silica nanoparticles (MSNPs), 100 nm in size, incorporating a Cy5 fluorophore within the silica framework, are synthesized and loaded with the anti-cancer drug temozolomide (TMZ), used in the treatment of gliomas. The surface of the particles is then decorated, using electrostatic interactions, with a polyarginine-peptide nucleic acid (R8-PNA) conjugate targeting the miR221 microRNA. The multi-functional nanosystem thus obtained is rapidly internalized into glioma C6 or T98G cells. The anti-miR activity of the PNA is retained, as confirmed by reverse transcription polymerase chain reaction (RT-PCR) measurements and induction of apoptosis is observed in temozolomide-resistant cell lines. The TMZ-loaded MSNPs show an enhanced pro-apoptotic effect, and the combined effect of TMZ and R8-PNA in the MSNPs shows the most effective induction of apoptosis (70.9% of apoptotic cells) thus far achieved in the temozolomide-resistant T98G cell line.

Intracellular delivery of peptide nucleic acid and organic molecules using zeolite-L nanocrystals

The design and synthesis of smart nanomaterials can provide interesting potential applications for biomedical purposes from bioimaging to drug delivery. Manufacturing multifunctional systems in a way to carry bioactive molecules, like peptide nucleic acids able to recognize specific targets in living cells, represents an achievement towards the development of highly selective tools for both diagnosis and therapeutics. This work describes a very first example of the use of zeolite nanocrystals as multifunctional nanocarriers to deliver simultaneously PNA and organic molecules into living cells. Zeolite-L nanocrystals are functionalized by covalently attaching the PNA probes onto the surface, while the channel system is filled with fluorescent guest molecules. The cellular uptake of the PNA/Zeolite-L hybrid material is then significantly increased by coating the whole system with a thin layer of biodegradable poly-L-lysine. The delivery of DAPI as a model drug molecule, inserted into the zeolite pores, is also demonstrated to occur in the cells, proving the multifunctional ability of the system. Using this zeolite nanosystem carrying PNA probes designed to target specific RNA sequences of interest in living cells could open new possibilities for theranostic and gene therapy applications.

Bio-imaging with neutral luminescent Pt(ii) complexes showing metal⋯metal interactions

Self-assembled platinum compounds resulting in stable, highly emissive and long-lived species are reported for cell imaging.

When self-assembly meets biology: luminescent platinum complexes for imaging applications

Self-assembled luminescent structures based on platinum complexes. A new tool for bioimaging?