Solution-processed DPP-based small molecule that gives high photovoltaic efficiency with judicious device optimization

Adjusting the photovoltaic performance of big fused ring-based small molecules by tailoring with different modifications

Three novel A-D-A type small-molecule donor materials, namely AAN-DPP2, AAN(T-DPP)2 and AANT(T-DPP)2, with anthanthrene (AAN) as the electron-donating core, diketopyrrolopyrrole (DPP) as the electron-accepting moiety, and thiophene as π-bridge units, have been designed and synthesized for application in bulk-heterojunction (BHJ) organic solar cells (OSCs). Compared to AAN-DPP2, devices based on AAN(T-DPP)2 and AANT(T-DPP)2 show better photovoltaic performance due to broader absorption and better planarity of the molecular backbone. A maximum power conversion efficiency (PCE) of 2.33% with a short-circuit current density (J sc) of 6.82 mA cm-2 and a fill factor (FF) of 39.80 was obtained in the AAN(T-DPP)2/PC71BM-based solar cells. This is resulting from the suitable thickness of the active layer, improving the ability of catching light and decreasing the twist angle of the backbone by inserting a thiophene spacer. The results indicate that strategic substitution of π-bridges and side-chains in A-D-A type SMs is an efficient strategy to improve photovoltaic performance.

Recent progress in porphyrin- and phthalocyanine-containing perovskite solar cells

In this review, we summarize the application of porphyrins and phthalocyanines in perovskite solar cells to date. Since the first porphyrin- and phthalocyanine-based perovskite solar cells were reported in 2009, their power conversion efficiency has dramatically increased from 3.9% to over 20%. Porphyrins and phthalocyanines have mostly been used as the charge selective layers in these cells. In some cases, they have been used inside the perovskite photoactive layer to form two-dimensional perovskite structures. In other cases, they were used at the interface to engineer the surface energy level. This review gives a chronological introduction to the application of porphyrins and phthalocyanines for perovskite solar cells depending on their role. This review article also provides the history of porphyrin and phthalocyanine derivative development from the perspective of perovskite solar cell applications.

D-π-A-π-D Structured Diketopyrrolopyrrole-Based Electron Donors for Solution-Processed Organic Solar Cells

Solution-processable D-π-A-π-D structured two organic small molecules bearing thienyl diketopyrrolopyrrole (TDPP) and furanyl diketopyrrolopyrrole (FDPP) as central acceptor units and cyano on the π-bridge and phenothiazine as the terminal donor units, coded as TDPP-PTCN and FDPP-PTCN, are designed and synthesized. The C-H arylation and Suzuki coupling protocols have been adopted for synthesizing the molecules. Solution-processed organic solar cells (OSCs) were constructed with these molecules as the donors and phenyl-C₇₁-butyric acid methyl ester as the acceptor yielding power conversion efficiencies (PCE) of 4.0% for FDPP-PTCN and 5.2% for TDPP-PTCN, which is the highest PCE reported so far from the small molecular DPP-phenothiazine-based architecture for solution-based OSCs. The effect of heteroatom substitution on thermal stability and optoelectronic and photovoltaic performances is also systematically investigated herein. This work demonstrates that replacement of oxygen with sulfur in these kinds of small molecules remarkably improves the photovoltaic performance of OSCs.

Dithieno[3,2-b:2',3'-d]pyrrole-benzo[c][1,2,5]thiadiazole conjugate small molecule donors: effect of fluorine content on their photovoltaic properties

Two new small molecule donors, namely ICT4 and ICT6 with D₁-A-D₂-A-D₁ architecture having 2,4-bis(2-ethylhexyl)-4H-dithieno[3,2-b:2',3'-d]pyrrole (EHDTP, D₁) and 4,8-bis((2-ethylhexyl)oxy)benzo[1,2-b:4,5-b']dithiophene (OBDT, D₂) as the terminal and central donor, and benzo[c][1,2,5]thiadiazole (BT for ICT4) and 5,6-difluorobenzo[c][1,2,5]thiadiazole (F2BT for ICT6) as the acceptor (A) moieties, are synthesized and their optical, electronic and photovoltaic properties are investigated. Both ICT4 and ICT6 have considerable solubility in various solvents and possess efficient light absorption ability [ε (×10⁵ mol^-1 cm^-1) is 0.99 and 1.06, respectively for ICT4 and ICT6] and appropriate frontier molecular orbital energy offsets with [6,6]-phenyl-C₇₁-butyric acid methyl ester (PC₇₁BM). Bulk heterojunction solar cells (BHJSCs) are fabricated using ICT4/ICT6 and PC₇₁BM as donors and acceptors, respectively and BHJSCs with two-step annealed (thermal followed by solvent vapor annealing) active layers of ICT4 and ICT6 show overall power conversion efficiencies (PCEs) of 5.46% and 7.91%, respectively. The superior photovoltaic performance of the ICT6 based BHJSCs is due to the favourable morphology with a nanoscale interpenetrating network in the ICT6:PC₇₁BM active layer induced by the fluorine atoms on the BT acceptor, which significantly enhances the dissociation of excitons, charge transport and the charge collection efficiency, and suppresses bimolecular recombination in the BHJ. The observed higher PCE of 7.91% indicates that ICT6 is one of the best BT based donor material for small molecular BHJSCs.

High Performance Solution Processed Organic Field Effect Transistors with Novel Diketopyrrolopyrrole-Containing Small Molecules

The donor-acceptor (D-A)-type diketopyrrolopyrrole (DPP)-based small molecules (LGC-D117 and LGC-D118) were synthesized and used as the active layer of solution-processable organic field-effect transistors (OFETs). Both LGC-D117 and LGC-D118 contain silaindacenodithiophene as electron-donor units with DPP as an electron-accepting linker, and octylrhodanine as the electron-accepting end group. The molecules were functionalized with different side chains to study their effects on OFET characteristics. LGC-D117 has a simple branched alkyl side chain, whereas LGC-D118 features a bulky siloxane-terminated hybrid alkyl chain. The siloxane side chains of LGC-D118 account for its better crystallinity, leading to significantly high field-effect mobility (max 3.04 cm² V^-1 s^-1). In particular, LGC-D118 is well soluble and sustains the high mobility in the environmentally friendly 2-methyltetrahydrofuran solvent with low temperature annealing at 100 °C due to the bulky siloxane-terminated alkyl side chain.

Facile synthesis of low band-gap DPP–EDOT containing small molecules for solar cell applications

Four donor–donor–acceptor–donor–donor type small molecules were synthesized (by direct alkylation) for photovoltaic applications.

Design of Diketopyrrolopyrrole (DPP)-Based Small Molecules for Organic-Solar-Cell Applications

After the first report in 2008, diketopyrrolopyrrole (DPP)-based small-molecule photovoltaic materials have been intensively explored. The power conversion efficiencies (PCEs) for the DPP-based small-molecule donors have been improved up to 8%. Furthermore, through judicious structure modification, DPP-based small molecules can also be converted into electron-acceptor materials, and, recently, some exciting progress has been achieved. The development of DPP-based photovoltaic small molecules is summarized here, and the photovoltaic performance is discussed in relation to structural modifications, such as the variations of donor-acceptor building blocks, alkyl substitutions, and the type of conjugated bridges, as well as end-capped groups. It is expected that the discussion will provide a guideline in the exploration of novel and promising DPP-containing photovoltaic small molecules.

Bi-diketopyrrolopyrrole (Bi-DPP) as a novel electron accepting compound in low band gap π-conjugated donor-acceptor copolymers/oligomers

The synthesis and characterization of a novel 2,5-diketopyrrolo[3,4-c]pyrrole(DPP)-based accepting building block with the scheme DPP-neutral small linker-DPP (Bi-DPP) is presented, which was utilized as electron accepting moiety for low band gap π-conjugated donor–acceptor copolymers as well as for a donor–acceptor small molecule. The electron accepting moiety Bi-DPP was prepared via a novel synthetic pathway by building up two DPP moieties step by step simultaneously starting from a neutral phenyl core unit. Characterization of the synthesized oligomeric and polymeric materials via cyclic voltammetry afford LUMO energy levels from −3.49 to −3.59 eV as well as HOMO energy levels from −5.07 to −5.34 eV resulting in low energy band gaps from 1.52 to 1.81 eV. Spin coating of the prepared donor–acceptor oligomers/polymers resulted in well-defined films. Moreover, UV–vis measurements of the investigated donor–acceptor systems showed a broad absorption over the whole visible region. It is demonstrated that Bi-DPP as an electron accepting moiety in donor–acceptor systems offer potential properties for organic solar cell devices.

Modulating PCBM-Acceptor Crystallinity and Organic Solar Cell Performance by Judiciously Designing Small-Molecule Mainchain End-Capping Units

In this article, we report that the bulk-size and electron-donating/electron-accepting nature of moieties, which are end-capping onto small-molecule donor mainchain, not only modulate the donor's absorption, molecular frontier orbitals, and phase ordering, but also effectively tune the PC₇₁BM-acceptor phase crystallinity. Compared to the electron-deficient trifluoromethyl (SM-CF₃) units on the diketopyrrolopyrrole (DPP) small molecule mainchain ends, the electron-rich methoxyl (SM-OCH₃) units ending on the same mainchain help improve the PC₇₁BM-acceptor phase short-range ordering. As a result, the -OCH₃ capping small-molecule displays larger short-circuit current density (J_sc) when blended with PC₇₁BM (10.72 ± 0.22 vs. 16.15 ± 0.53 mA/cm²). However, the electron-donating nature of -OCH₃ raises the donor HOMO level, which leads to a quite small open-circuit voltage (V_oc) (0.624 vs. 0.881 V). Replacement of the -OCH₃ with the large and weak electron-donating aromatic carbazolyl (SM-Cz) ones affords the small molecule of SM-Cz. The SM-Cz:PC₇₁BM system affords a high V_oc of 0.846 V and a large J_sc of 13.33 ± 0.34 mA/cm² after thermal annealing, and hence gives a larger power conversion efficiency (PCE) of 6.26 ± 0.13%, which is among the top values achieved so far from the DPP molecules. Taken together, these results demonstrate that engineering the end-capping units on small-molecule donor mainchain can effectively modulate the organic solar cell performance.

Synergetic Solvent Engineering of Film Nanomorphology to Enhance Planar Perylene Diimide-Based Organic Photovoltaics

Solvent additive has proven as a useful protocol for improving the film nanomorphology of polymer donor (D): fullerene acceptor (A) blends in bulk heterojunction (BHJ) photovoltaic cells. By contrast, the effect of such solvent additive on nonfullerene BHJ cells based on perylene diimide acceptor, for instance, is less effective because of their highly planar structure and strong π-aggregation in solid state. Here we choose N,N'-bis(1-ethylpropyl)-perylene-3,4,9,10-tetracarboxylic diimide (PDI) and thieno[3,4-b]thiophene-alt-benzodithiophene (PTB7) as a model D:A blend system to investigate how solvent engineering strategy synergistically impacts the blend film nanomorphology. Based on the differences of solvent volatility and solubility, various host solvents-chloroform (CF) and chlorobenzene (CB) and solvent additives-chloronaphthalene (CN) and 1,8-diiodooctane (DIO) are selected for comparative studies. It is found that the π-aggregation of PDIs can be largely suppressed by using low-boiling point (Tb) CF solvent, yet enlarged by using high-Tb CB. Moreover, CN additive provides good solubility of PDI molecules and hence reduces large PDI aggregates in CB system, while DIO exhibiting poor solubility works oppositely. By contrast, DIO that presents larger Tb difference with CF prolongs the film-forming, which assists in optimizing the PDI aggregation and increases the intermixed PTB7:PDI phases more significantly than CN in CF system, yielding the finest phase-separation morphology and balanced charge mobility. Consequently, the inverted BHJ cells based on CF-processed PTB7:PDI blend film with 0.4 vol % DIO exhibit the highest PCE of 3.55% with a fill factor of 56%, both of which are among the best performance for such a paradigm PTB7:PDI blend-based BHJ cells.

Effect of the π-conjugation length on the properties and photovoltaic performance of A-π-D-π-A type oligothiophenes with a 4,8-bis(thienyl)benzo[1,2-b:4,5-b']dithiophene core

Benzo[1,2-b:4,5-b′]dithiophene (BDT) is an excellent building block for constructing π-conjugated molecules for the use in organic solar cells. In this paper, four 4,8-bis(5-alkyl-2-thienyl)benzo[1,2-b:4,5-b′]dithiophene (TBDT)-containing A–π–D–π–A-type small molecules (COOP-nHT-TBDT, n = 1, 2, 3, 4), having 2-cyano-3-octyloxy-3-oxo-1-propenyl (COOP) as terminal group and regioregular oligo(3-hexylthiophene) (nHT) as the π-conjugated bridge unit were synthesized. The optical and electrochemical properties of these compounds were systematically investigated. All these four compounds displayed broad absorption bands over 350–600 nm. The optical band gap becomes narrower (from 1.94 to 1.82 eV) and the HOMO energy levels increased (from −5.68 to −5.34 eV) with the increase of the length of the π-conjugated bridge. Organic solar cells using the synthesized compounds as the electron donor and PC₆₁BM as the electron acceptor were fabricated and tested. Results showed that compounds with longer oligothiophene π-bridges have better power conversion efficiency and higher device stability. The device based on the quaterthiophene-bridged compound 4 gave a highest power conversion efficiency of 5.62% with a V_OC of 0.93 V, J_SC of 9.60 mA·cm⁻², and a FF of 0.63.

Star-shaped and linear π-conjugated oligomers consisting of a tetrathienoanthracene core and multiple diketopyrrolopyrrole arms for organic solar cells

Solution-processable star-shaped and linear π-conjugated oligomers consisting of an electron-donating tetrathienoanthracene (TTA) core and electron-accepting diketopyrrolopyrrole (DPP) arms, namely, TTA-DPP4 and TTA-DPP2, were designed and synthesized. Based on density functional theory calculations, the star-shaped TTA-DPP4 has a larger oscillator strength than the linear TTA-DPP2, and consequently, better photoabsorption property over a wide range of visible wavelengths. The photovoltaic properties of organic solar cells based on TTA-DPP4 and TTA-DPP2 with a fullerene derivative were evaluated by varying the thickness of the bulk heterojunction active layer. As a result of the enhanced visible absorption properties of the star-shaped π-conjugated structure, better photovoltaic performances were obtained with relatively thin active layers (40–60 nm).

The Importance of End Groups for Solution-Processed Small-Molecule Bulk-Heterojunction Photovoltaic Cells

End groups in small-molecule photovoltaic materials are important owing to their strong influence on molecular stability, solubility, energy levels, and aggregation behaviors. In this work, a series of donor-acceptor pentads (D2 -A-D1 -A-D2 ) were designed and synthesized, aiming to investigate the effect of the end groups on the materials properties and photovoltaic device performance. These molecules share identical central A-D1 -A triads (with benzodithiophene as D1 and 6-carbonyl-thieno[3,4-b]thiophene as A), but with various D2 end groups composed of alkyl-substituted thiophene (T), thieno[3,2-b]thiophene (TT), and 2,2'-bithiophene (BT). The results indicate a relationship between conjugated segment/alkyl chain length of the end groups and the photovoltaic performance, which contributes to the evolving molecular design principles for high efficiency organic solar cells.

The Influence of Fluorination on Nano-Scale Phase Separation and Photovoltaic Performance of Small Molecular/PC71BM Blends

To investigate the fluorination influence on the photovoltaic performance of small molecular based organic solar cells (OSCs), six small molecules based on 2,1,3-benzothiadiazole (BT), and diketopyrrolopyrrole (DPP) as core and fluorinated phenyl (DFP) and triphenyl amine (TPA) as different terminal units (DFP-BT-DFP, DFP-BT-TPA, TPA-BT-TPA, DFP-DPP-DFP, DFP-DPP-TPA, and TPA-DPP-TPA) were synthesized. With one or two fluorinated phenyl as the end group(s), HOMO level of BT and DPP based small molecular donors were gradually decreased, inducing high open circuit voltage for fluorinated phenyl based OSCs. DFP-BT-TPA and DFP-DPP-TPA based blend films both displayed stronger nano-scale aggregation in comparison to TPA-BT-TPA and TPA-DPP-TPA, respectively, which would also lead to higher hole motilities in devices. Ultimately, improved power conversion efficiency (PCE) of 2.17% and 1.22% was acquired for DFP-BT-TPA and DFP-DPP-TPA based devices, respectively. These results demonstrated that the nano-scale aggregation size of small molecules in photovoltaic devices could be significantly enhanced by introducing a fluorine atom at the donor unit of small molecules, which will provide understanding about the relationship of chemical structure and nano-scale phase separation in OSCs.

Low-Bandgap Small-Molecule Donor Material Containing Thieno[3,4-b]thiophene Moiety for High-Performance Solar Cells

By replacing the central thiophene of STDR, a sepithiophene terminated with two 3-ethylrhodanine moieties, with 2-ethylhexyl 3-fluorothieno[3,4-b]thiophene-2-carboxylate, an A-D-Q-D-A-type small molecule has been developed for high-performance organic solar cells with improved photocurrent. STDR-TbT exhibits a significant bathochromic shift with a low optical bandgap of approximately 1.60 eV in the thin film. Accordingly, STDR-TbT shows broad external quantum efficiency spectral response up to 800 nm. A high short circuit current (Jsc) of 10.90 mA cm(-2) was achieved for STDR-TbT:PC71BM-based devices; this is significantly higher than that of STDR:PC71BM-based devices, Jsc: 5.61 mA cm(-2), with a power-conversion efficiency (PCE) of 5.05%. Compared with STDR-based devices, STDR-TbT-based devices show balanced charge carrier transport, better thin-film morphology, and favorable charge separation/collection.

Oligomer Molecules for Efficient Organic Photovoltaics

Solar cells, a renewable, clean energy technology that efficiently converts sunlight into electricity, are a promising long-term solution for energy and environmental problems caused by a mass of production and the use of fossil fuels. Solution-processed organic solar cells (OSCs) have attracted much attention in the past few years because of several advantages, including easy fabrication, low cost, lightweight, and flexibility. Now, OSCs exhibit power conversion efficiencies (PCEs) of over 10%. In the early stage of OSCs, vapor-deposited organic dye materials were first used in bilayer heterojunction devices in the 1980s, and then, solution-processed polymers were introduced in bulk heterojunction (BHJ) devices. Relative to polymers, vapor-deposited small molecules offer potential advantages, such as a defined molecular structure, definite molecular weight, easy purification, mass-scale production, and good batch-to-batch reproducibility. However, the limited solubility and high crystallinity of vapor-deposited small molecules are unfavorable for use in solution-processed BHJ OSCs. Conversely, polymers have good solution-processing and film-forming properties and are easily processed into flexible devices, whereas their polydispersity of molecular weights and difficulty in purification results in batch to batch variation, which may hamper performance reproducibility and commercialization. Oligomer molecules (OMs) are monodisperse big molecules with intermediate molecular weights (generally in the thousands), and their sizes are between those of small molecules (generally with molecular weights <1000) and polymers (generally with molecular weights >10000). OMs not only overcome shortcomings of both vapor-deposited small molecules and solution-processed polymers, but also combine their advantages, such as defined molecular structure, definite molecular weight, easy purification, mass-scale production, good batch-to-batch reproducibility, good solution processability, and film-forming properties. Therefore, OMs are a good choice for solution-processed reproducible OSCs toward scalable commercialized applications. Considerable efforts have been dedicated to developing new OM electron donors and electron acceptors for OSCs. So far, the highest PCEs of solution-processed OSCs based on OM donors and acceptors are 9-10% and 6-7%, respectively. OM materials have become promising alternatives to polymer and/or fullerene materials for efficient and stable OSCs. In this Account, we present a brief survey of the recent developments in solution-processable OM electron donors and acceptors and their application in OSCs. Rational design of OMs with star- and linear-shaped structures based on triphenylamine, benzodithiophene, and indacenodithiophene units and their impacts on device performance are discussed. Structure-property relationships are also proposed. Furthermore, the remaining challenges and the key research directions in the near future are also addressed. In the next years, an interdisciplinary approach involving novel OM materials, especially electron acceptor materials, accurate morphology optimization, and advanced device technologies will probably bring high-efficiency and stable OSCs to final commercialization.

NIR absorbing D–π–A–π–D structured diketopyrrolopyrrole–dithiafulvalene based small molecule for solution processed organic solar cells

A new low band gap small molecule DPP–DTF with a D–π–A–π–D molecular structure composed of a dithiafulvalene (DTF) donor and a diketopyrrolopyrrole (DPP) acceptor was synthesized and tested for organic solar cells.

A D–π–A1–π–A2 push–pull small molecule donor for solution processed bulk heterojunction organic solar cells

Herein, benzothiadiazole (BTD), as an acceptor A1, has been used as a backbone to link triphenylamine (TPA) as donor and naphthalimide (NPI) as acceptor (A2) moieties through ethylene linkers to design a small molecule.

Symmetrical and unsymmetrical triphenylamine based diketopyrrolopyrroles and their use as donors for solution processed bulk heterojunction organic solar cells

Two small molecules DPP3 (D–π–A) and DPP4 (D–π–A–π–D) with triphenylamine (TPA) donors and diketopyrrolopyrrole (DPP) acceptors linked with ethyne linkers were designed and synthesized by the Pd-catalyzed Sonogashira cross-coupling reaction.

Structure–properties relationship in diketopyrrolopyrrole based small molecules using functional terminal side chains via direct arylation: a joint experimental and theoretical study

The role of terminal side chains in diketopyrrolopyrrole based small molecules has been analyzed, demonstrating how their optoelectronic properties vary.

Broadband photoresponse promoted by interfacial electron transfer in diketopyrrolopyrrole-based compound/ZnO hybrid nanocomposites

High photoresponse covering the UV-vis region was realized in the TTDPP/ZnO hybrid system, which is attributed to the efficient cascade electron transfer process.

Facile preparation of small molecules for bulk heterojunction solar cells

Facile preparation of solution-processable small molecules with only two step reactions for bulk heterojunction solar cells, exhibiting a power conversion efficiency as high as 4.64%.

D–A–D–π–D–A–D type diketopyrrolopyrrole based small molecule electron donors for bulk heterojunction organic solar cells

Two organic small molecules based on diketopyrrolopyrrole (DPP) units having a D–A–D–π–D–A–D structure denoted as DPP-DPP and DPPTDPP were synthesized.

Low band gap diketopyrrolopyrrole-based small molecule bulk heterojunction solar cells: influence of terminal side chain on morphology and photovoltaic performance

Two low band gap small molecules based on DPP with different terminal side chains were synthesized. They show similar physical properties but different photovoltaic property.

Direct C–H arylation for various Ar-cored diketopyrrolopyrrole containing small molecules in solution-processed field-effect transistors

D–A–π–A–D small molecules Ar(DPPT₂)₂ are designed and synthesized by direct (hetero) C–H arylation, with hole mobility as high as 0.12 cm² V⁻¹ s⁻¹.

Thiophene-free diphenyl-amino-stilbene-diketo-pyrrolo-pyrrole derivatives as donors for organic bulk heterojunction solar cells

An extended study on a group of four soluble diphenyl-amino-stilbene based diphenyl-diketopyrrolo-pyrrole molecules has been carried out. Using the materials in thin-film transistors it was shown that the above-mentioned compounds can be successfully used as donors in organic photovoltaic devices. Influence of the molecular symmetry and solubilizing chain on the morphology and solar cell performance are described. It was shown that a shorter and non-branched ethyl acetate chain leads to higher charge carrier mobility, short circuit current, and better fill factor. After the basic optimization, a power conversion efficiency of about 1.5 % was reached. This, to the best of our knowledge, is the highest reported efficiency of thiophene-free small-molecule diketo-pyrrolopyrroles.

Dialkoxyphenyldithiophene-based small molecules with enhanced absorption for solution processed organic solar cells

Breaking of BDT to form PDT units enhanced the planarity of the molecular backbone and absorption. The resulting organic photovoltaic device showed a highest PCE of 6.64% with a high J_sc of 12.74 mA cm⁻².

Solution-Processable Organic Molecule for High-Performance Organic Solar Cells with Low Acceptor Content

A new planar D2-A-D1-A-D2 structured organic molecule with bithienyl benzodithiophene (BDT) as central donor unit D1 and fluorine-substituted benzothiadiazole (BTF) as acceptor unit and alkyl-dithiophene as end group and donor unit D2, BDT-BTF, was designed and synthesized for the application as donor material in organic solar cells (OSCs). BDT-BTF shows a broad absorption in visible region, suitable highest occupied molecular orbital energy level of -5.20 eV, and high hole mobility of 1.07 × 10(-2) cm(2)/(V s), benefitted from its high coplanarity and strong crystallinity. The OSCs based on BDT-BTF as donor (D) and PC71BM as acceptor (A) at a D/A weight ratio of 3:1 without any extra treatment exhibit high photovoltaic performance with Voc of 0.85 V, Jsc of 10.48 mA/cm(2), FF of 0.66, and PCE of 5.88%. The morphological study by transmission electron microscopy reveals that the blend of BDT-BTF and PC71BM (3:1, w/w) possesses an appropriate interpenetrating D/A network for the exciton separation and charge carrier transport, which agrees well with the good device performance. The optimized D/A weight ratio of 3:1 is the lowest acceptor content in the active layer reported so far for the high-performance OSCs, and the organic molecules with the molecular structure like BDT-BTF could be promising high-performance donor materials in solution-processable OSCs.

Controlling the Morphology of BDTT-DPP-Based Small Molecules via End-Group Functionalization for Highly Efficient Single and Tandem Organic Photovoltaic Cells

A series of narrow-band gap, π-conjugated small molecules based on diketopyrrolopyrrole (DPP) electron acceptor units coupled with alkylthienyl-substituted-benzodithiophene (BDTT) electron donors were designed and synthesized for use as donor materials in solution-processed organic photovoltaic cells. In particular, by end-group functionalization of the small molecules with fluorine derivatives, the nanoscale morphologies of the photoactive layers of the photovoltaic cells were successfully controlled. The influences of different fluorine-based end-groups on the optoelectronic and morphological properties, carrier mobilities, and the photovoltaic performances of these materials were investigated. A high power conversion efficiency (PCE) of 6.00% under simulated solar light (AM 1.5G) illumination has been achieved for organic photovoltaic cells based on a small-molecule bulk heterojunction system consisting of a trifluoromethylbenzene (CF3) end-group-containing oligomer (BDTT-(DPP)2-CF3) as the donor and [6,6]-phenyl-C71-butyric acid methyl ester (PC71BM) as the acceptor. As a result, the introduction of CF3 end-groups has been found to enhance both the short circuit current density (JSC) and fill factor (FF). A tandem photovoltaic device comprising an inverted BDTT-(DPP)2-CF3:PC71BM cell and a poly(3-hexylthiophene) (P3HT):indene-C60-bisadduct (IC60BA)-based cell as the top and bottom cell components, respectively, showed a maximum PCE of 8.30%. These results provide valuable guidelines for the rational design of conjugated small molecules for applications in high-performance organic photovoltaic cells. Furthermore, to the best of our knowledge, this is the first report on the design of fluorine-functionalized BDTT-DPP-based small molecules, which have been shown to be a viable candidate for use in inverted tandem cells.

Enhancement of Performance and Mechanism Studies of All-Solution Processed Small-Molecule based Solar Cells with an Inverted Structure

Both solution-processed polymers and small molecule based solar cells have achieved PCEs over 9% with the conventional device structure. However, for the practical applications of photovoltaic technology, further enhancement of both device performance and stability are urgently required, particularly for the inverted structure devices, since this architecture will probably be most promising for the possible coming commercialization. In this work, we have fabricated both conventional and inverted structure devices using the same small molecular donor/acceptor materials and compared the performance of both device structures, and found that the inverted structure based device gave significantly improved performance, the highest PCE so far for inverted structure based device using small molecules as the donor. Furthermore, the inverted device shows a remarkable stability with almost no obvious degradation after three months. Systematic device physics and charge generation dynamics studies, including optical simulation, light-intensity-dependent current-voltage experiments, photocurrent density-effective voltage analyses, transient absorption measurements, and electrical simulations, indicate that the significantly enhanced performance using inverted device is ascribed to the increasing of Jsc compared to the conventional device, which in turn is mainly attributed to the increased absorption of photons in the active layers, rather than the reduced nongeminate recombination.

Understanding the Halogenation Effects in Diketopyrrolopyrrole-Based Small Molecule Photovoltaics

Two molecules containing a central diketopyrrolopyrrole and two oligothiophene units have been designed and synthesized. Comparisons between the molecules containing terminal F (FDPP) and Cl (CDPP) atoms allowed us to evaluate the effects of halogenation on the photovoltaic properties of the small molecule organic solar cells (OSCs). The OSCs devices employing FDPP:PC71BM films showed power conversion efficiencies up to 4.32%, suggesting that fluorination is an efficient method for constructing small molecules for OSCs.

Improving Photovoltaic Performance of the Linear A-Ar-A-type Small Molecules with Diketopyrropyrrole Arms by Tuning the Linkage Position of the Anthracene Core

Two isomeric A-Ar-A-type small molecules of DPP2An(9,10) and DPP2An(2,6), were synthesized with two acceptor arms of diketopyrropyrroles (DPP) and a planar aryl hydrocarbon core of the different substituted anthracene (An), respectively. Their thermal stability, crystallinity, optoelectronic, and photovoltaic performances were investigated. Significantly red-shifted absorption profile and higher HOMO level were observed for the DPP2An(2,6) with 2,6-substituted anthracene relative to the DPP2An(9,10) with 9,10-substituted anthracene, as the former exhibited better planarity and a larger conjugate system. As a result, the solution-processing solar cells based on DPP2An(2,6) and PC71BM (w/w,1:1) displayed remarkably increased power conversion efficiency of 5.44% and short-circuit current density (Jsc) of 11.90 mA/cm(2) under 1% 1,8-diiodooctane additive. The PCE and Jsc values were 3.7 and 2.9 times those of the optimized DPP2An(9,10)-based cells, respectively. This work demonstrates that changing the linkage position of the anthracene core in the A-Ar-A-type SMs can strongly improve the photovoltaic properties in organic solar cells.

Structure-property relationships: asymmetric alkylphenyl-substituted anthracene molecules for use in small-molecule solar cells

Two asymmetric anthracene-based organic molecules, NDHPEA and TNDHPEA, were prepared without or with a thiophene spacer between the anthracene and naphthalene units. These asymmetric oligomers displayed different degrees of coplanarity, as evidenced by differences in the dihedral angles calculated by using DFT. Differential scanning calorimetry and XRD studies were used to probe the crystallization characteristics and molecular packing structures in the active layers. The coplanarity of the molecules in the asymmetric structure significantly affected the crystallization behavior and the formation of crystalline domains in the solid state. The small-molecule crystalline properties were correlated with the device physics by determining the J-V characteristics and hole mobilities of the devices.