Synthesis of Au-decorated tripod-shaped Te hybrids for applications in the ultrasensitive detection of arsenic

Necklace-like Te-Au reticula platform with three dimensional hotspots Surface-Enhanced Raman Scattering (SERS) sensor for food hazards analysis

In this work, we combined three-dimensional (3D) necklace-like Te-Au reticula as novel surface-enhanced Raman scattering (SERS) active substrates with oxidation-reduction displacement reactions to construct a molecular machine for SERS detection. The structurally tunable 3D necklace-like spatial structures generated more active 'hot spots' and thus enhanced the sensitivity of SERS signals. Besides, layers of ultrathin nanowires showed high sequence dependence that ensure the repeatability and abundant hotspots at interparticle gaps and guarantee the high SERS performance of the substrate. A better-localized surface plasmon resonance (LSPR) effect of the sensor was verified by finite-difference time-domain (FDTD) analysis in both Raman intensities and electromagnetic field distributions compared to the citrate-stabilized AuNPs and CTAB-protected AuNRs. The proposed strategy can also serve as a universally amplified and sensitive detection platform for monitoring different molecules, thus achieving an amplification detection of 3,3'-diethylthiatricarbocyanine iodide (DTTCI) are 1 nM and R6G with a low limit of detection of 1 pM. Especially, the intensity of the main vibration of R6G from 30 spots of SERS data with excellent reproducibility (relative standard deviation of 6.25 %). High selectivity and accuracy of the SERS sensor were proved by practical analysis melamine (MM) in milk with a linear calibration curve (R2 = 0.9962) and a limit of detection of 0.75 mg/kg. Our research provides a new perspective to construct 3D SERS sensor from integrated structural design.

Progress in the Synthesis and Application of Tellurium Nanomaterials

In recent decades, low-dimensional nanodevices have shown great potential to extend Moore's Law. The n-type semiconductors already have several candidate materials for semiconductors with high carrier transport and device performance, but the development of their p-type counterparts remains a challenge. As a p-type narrow bandgap semiconductor, tellurium nanostructure has outstanding electrical properties, controllable bandgap, and good environmental stability. With the addition of methods for synthesizing various emerging tellurium nanostructures with controllable size, shape, and structure, tellurium nanomaterials show great application prospects in next-generation electronics and optoelectronic devices. For tellurium-based nanomaterials, scanning electron microscopy and transmission electron microscopy are the main characterization methods for their morphology. In this paper, the controllable synthesis methods of different tellurium nanostructures are reviewed, and the latest progress in the application of tellurium nanostructures is summarized. The applications of tellurium nanostructures in electronics and optoelectronics, including field-effect transistors, photodetectors, and sensors, are highlighted. Finally, the future challenges, opportunities, and development directions of tellurium nanomaterials are prospected.

ZnAl2O4 Nanomaterial as a Naked-Eye Arsenate Sensor: A Combined Experimental and Computational Mechanistic Approach

Raising public awareness over the emerging health risk due to intake of arsenic-contaminated potable water is a matter of great concern. Exploration of cost-effective, self-testing kits is a substantial way to reach out to the masses and detect the presence of arsenate in water. With this agenda, a photoluminescent Mannich base Zn(II) complex (ZnMC = [Zn₂(ML)₂]·(ClO₄)₂·(H₂O); HML = Mannich base ligand) has been synthesized, and its dinuclearity was verified with single-crystal X-ray diffraction structural analysis. Among a range of anions, ZnMC was found to detect arsenate selectively by showing a turn-off emission with a color change from bright green to dark under UV light. The real-life applicability of the ZnMC probe is somewhat restricted to only sensing of arsenate, but not its removal owing to the fact of its homogeneity. Considering the efficacy of ZnMC as well as a need for its easy removal from water, slight modification has been done with chloride ions in the form of ZnMC″ (=[Zn₂(ML)₂(Cl)₂]), and finally, an interface between homogeneous and heterogeneous solid support has been explored with a strategic fabrication of ZnMC″ grafted ZnAl₂O₄, named as ZAZ nanomaterial. This not only imparts successful segregation of arsenate from drinking water but also provides naked-eye detection under ambient light as well as UV light. Thermodynamic parameters associated with the binding of arsenate to ZnMC and ZAZ have been evaluated through isothermal calorimetric (ITC) measurements. Steady-state and time-resolved fluorescence titration study, absorption titration study, scanning electron microscopy (SEM), transmission electron microscopy (TEM), and computational calculations have been performed to get deep insights into the sensing properties. Proper justification of the sensing mechanism is the highlight of this work. ZAZ nanomaterial has been exploited to produce a self-test paper kit for arsenate detection with a limit of 9.86 ppb, which potentially enables applications in environmental monitoring.

Anodic Stripping Voltammetric Analysis of Trace Arsenic(III) on a Au-Stained Au Nanoparticles/Pyridine/Carboxylated Multiwalled Carbon Nanotubes/Glassy Carbon Electrode

A Au-stained Au nanoparticle (Aus)/pyridine (Py)/carboxylated multiwalled carbon nanotubes (C-MWCNTs)/glassy carbon electrode (GCE) was prepared for the sensitive analysis of As(III) by cast-coating of C-MWCNTs on a GCE, electroreduction of 4-cyanopyridine (cPy) to Py, adsorption of gold nanoparticles (AuNPs), and gold staining. The Py/C-MWCNTs/GCE can provide abundant active surface sites for the stable loading of AuNPs and then the AuNPs-initiated Au staining in HAuCl4 + NH2OH solution, giving a large surface area of Au on the Aus/Py/C-MWCNTs/GCE for the linear sweep anodic stripping voltammetry (LSASV) analysis of As(III). At a high potential-sweep rate of 5 V s-1, sharp two-step oxidation peaks of As(0) to As(III) and As(III) to As(V) were obtained to realize the sensitive dual-signal detection of As(III). Under optimal conditions, the ASLSV peak currents for oxidation of As(0) to As(III) and of As(III) to As(V) are linear with a concentration of As(III) from 0.01 to 8 μM with a sensitivity of 0.741 mA μM-1 and a limit of detection (LOD) of 3.3 nM (0.25 ppb) (S/N = 3), and from 0.01 to 8.0 μM with a sensitivity of 0.175 mA μM-1 and an LOD of 16.7 nM (1.20 ppb) (S/N = 3), respectively. Determination of As(III) in real water samples yielded satisfactory results.

Advances in Electrochemical Detection Electrodes for As(III)

Arsenic is extremely abundant in the Earth's crust and is one of the most common environmental pollutants in nature. In the natural water environment and surface soil, arsenic exists mainly in the form of trivalent arsenite (As(III)) and pentavalent arsenate (As(V)) ions, and its toxicity can be a serious threat to human health. In order to manage the increasingly serious arsenic pollution in the living environment and maintain a healthy and beautiful ecosystem for human beings, it is urgent to conduct research on an efficient sensing method suitable for the detection of As(III) ions. Electrochemical sensing has the advantages of simple instrumentation, high sensitivity, good selectivity, portability, and the ability to be analyzed on site. This paper reviews various electrode systems developed in recent years based on nanomaterials such as noble metals, bimetals, other metals and their compounds, carbon nano, and biomolecules, with a focus on electrodes modified with noble metal and metal compound nanomaterials, and evaluates their performance for the detection of arsenic. They have great potential for achieving the rapid detection of arsenic due to their excellent sensitivity and strong interference immunity. In addition, this paper discusses the relatively rare application of silicon and its compounds as well as novel polymers in achieving arsenic detection, which provides new ideas for investigating novel nanomaterial sensing. We hope that this review will further advance the research progress of high-performance arsenic sensors based on novel nanomaterials.

Electrochemical Mini-Platform with Thread based Electrodes for Interference Free Arsenic Detection

Herein, a fully integrated thread/textile-based electrochemical sensing device has been demonstrated. A hydrophilic conductive carbon thread, chemically modified with gold nanoparticles through an electrodeposition process, was used as a working electrode (WE). The hydrophilic thread coated with Ag/AgCl and an unmodified bare hydrophilic thread were used as reference electrode (RE) and counter electrode (CE) respectively. The device was fabricated with hydrophilic conductive carbon threads supported by capillary tubes and these integrated electrodes were placed in a 2 mL glass vial. The physico-chemical characterization of the working electrode was carried out using SEM (scanning electron microscopy) and X-ray photoelectron spectroscopy (XPS). Furthermore, the fabricated sensing platform, was tested for electrochemical sensing of arsenic. The electrocatalytic oxidation activity of arsenic in the designed platform was investigated via cyclic voltammetry (CV) and square wave Voltammetry (SWV). An oxidation peak at -0.4 V corresponding to the oxidation of arsenic was obtained. Scan rate effect was performed using CV analysis and the diffusion coefficient was found to be 2.478×10-10 with a regression coefficient of R2 = 0.9647. Further, concentration effect was accomplished in the linear range 0.4 μM to 60 μM. The limit of detection was obtained as 0.416 μM. For the practical application, effect of interference from other chemicals and real sample analysis from the tap water and blood serum sample was carried out which gave remarkable recovery values.

A High-Response Electrochemical As(III) Sensor Using Fe3O4–rGO Nanocomposite Materials

Nowadays, heavy metal ion pollution in water is becoming more and more common, especially arsenic, which seriously threatens human health. In this work, we used Fe3O4–rGO nanocomposites to modify a glassy carbon electrode and selected square wave voltametric electrochemical detection methods to detect trace amounts of arsenic in water. Field emission scanning electron microscopy (FESEM) and transmission electron microscopy (TEM) showed that Fe3O4 nanoparticles were uniformly distributed on the rGO sheet, with a particle size of about 20 nm. Raman spectroscopy and electrochemical impedance spectroscopy (EIS) showed that rGO provides higher sensitivity and conductive substrates. Under optimized experimental conditions, Fe3O4–rGO-modified glassy carbon electrodes showed a higher sensitivity (2.15 µA/ppb) and lower limit of detection (1.19 ppb) for arsenic. They also showed good selectivity, stability, and repeatability.

A novel and sensitive electrochemical sensor based on nanoporous gold for determination of As(III)

Three-dimensional porous gold nanoparticles (NPG) were synthesized in situ on indium-doped tin oxide (ITO) substrates by a green and convenient one-step electrodeposition method to achieve super-sensitive As(III) detection. The introduction of NPG method not only greatly improves the electron transfer capacity and surface area of sensor interface but provides more active sites for As(III) enrichment, thus boosting sensitivity and selectivity. The sensor was characterized by scanning electron microscopy, energy dispersion spectroscopy, differential pulse anode stripping voltammetry (DPASV), and electrochemical impedance to evaluate its morphology, composition, and electrochemical performance. The wall thickness of NPG was customized by optimizing the concentration of electroplating solution, dissolved electrolyte, deposition potential, and reaction time. Under optimal conditions, the electrochemical sensor showed a wide linear range from 0.1 to 50 μg/L As(III), with a detection limit (LOD) of 0.054 μg/L (S/N = 3). The LOD is far below 10 μg/L, the recommended maximum value by the world health organization for drinking water. Stability, reproducibility, and repeatability of NGP/ITO were determined to be 2.77%, 4.9%, and 4.1%, respectively. Additionally, the constructed sensor has been successfully applied to determine As(III) in three actual samples, and the results are in good agreement with that of hydride generation atomic fluorescence spectrometry (AFS). Graphical abstract.

Highly Sensitive and Selective Detection of Arsenic Using Electrogenerated Nanotextured Gold Assemblage

Arsenic is considered as a toxic heavy metal which is highly detrimental to ecological systems, and long-term exposure to it is highly dangerous to life as it can cause serious health effects. Timely detection of traces of active arsenic (As³⁺) is very crucial, and the development of simple, cost-effective methods is imperative to address the presence of arsenic in water and food chain. Herein, we present an extensive study on chemical-free electrogenerated nanotextured gold assemblage for the detection of ultralow levels of As³⁺ in water up to 0.08 ppb concentration. The gold nanotextured electrode (Au/GNE) is developed on simple Au foil via electrochemical oxidation-reduction sweeps in a metal-ion-free electrolyte solution. The ultrafine nanoscale morphological attributes of Au/GNE substrate are studied by scanning electron microscopy. Square wave anodic stripping voltammetry (ASV) response for different concentrations of arsenites is determined and directly correlated with As³⁺ detection regarding the type of electrolyte solution, deposition potential, and deposition time. The average of three standard curves are linear from 0.1 ppb up to 9 ppb (n = 15) with a linear regression coefficient R ² = 0.9932. Under optimized conditions, a superior sensitivity of 39.54 μA ppb^-1 cm^-2 is observed with a lower detection limit of 0.1 ppb (1.3 nM) (based on the visual analysis of calibration curve) and 0.08 ppb (1.06 nM) (based on the standard deviation of linear regression). Furthermore, the electrochemical Au/GNE is also applicable for arsenic detection in a complex system containing Cu²⁺, Ni²⁺, Fe²⁺, Pb²⁺, Hg²⁺, and other ions for the selective and sensitive analysis. Au/GNE substrate also possesses remarkable reproducibility and high stability for arsenic detection during repeated analysis and thus can be employed for prolonged applications and reiterating analyses. This electrochemically generated nanotextured electrode is also applicable for As³⁺ detection and analysis in a real water sample under optimized conditions. Therefore, fabrication conditions and analytical and electroanalytical performances justify that because of its low cost, easy preparation method and assembly, high reproducibility, and robustness, nanosensor Au/GNE can be scaled up for further applications.

Midwavelength Infrared Photoluminescence and Lasing of Tellurium Elemental Solid and Microcrystals

Tellurium has been of great interest in physics, chemistry, material science, and more recently in nanoscience. However, information on the photoluminescence of Te crystals, crucial in understanding the material, has never been disclosed. Here, we present photoluminescence and lasing for the Te bulk crystal and microcrystals. Photoluminescence of Te bulk solid crystal was observed at 3.75 μm in the midwavelength infrared (MWIR) region, matching the theoretically predicted value well. With increasing the photoexcitation intensity or decreasing temperature, we successfully observed MWIR random lasing of the bulk Te crystals at 3.62 μm. Furthermore, the rod-shaped Te microcrystals efficiently exhibit second harmonic and third harmonic lasing at MWIR and short-wavelength infrared regions, respectively. Nonlinear coherent MWIR lasing from the Te microcrystals will serve as an excellent mid-IR light source, opening up new applications in infrared photonics, extremely long-depth penetration bioimaging, and optoelectronics.

A review of the advanced developments of electrochemical sensors for the detection of toxic and bioactive molecules

The recent developments made regarding the novel, cost-effective, and environmentally friendly nanocatalysts for the electrochemical sensing of biomolecules, pesticides, nitro compounds and heavy metal ions are discussed in this review article.

Emerging tellurium nanostructures: controllable synthesis and their applications

Tellurium (Te) is a rare element in trace amounts of about one part per billion, comparable to that of platinum and ranked 75th in the abundance of the elements in the earth crust. Te nanostructures, as narrow bandgap semiconductors, have numerous potential applications in the fabrication of many modern devices. The past decades have witnessed an explosion in new strategies for synthesizing diverse emerging Te nanostructures with controlled compositions, sizes, shapes, and structures. Their structure-determined nature makes functional Te nanomaterials an attractive candidate for modern applications. This review focuses on the synthesis and morphology control of emerging Te nanostructures and summarizes the latest developments in the applications of Te nanostructures, such as their use as chemical transformation templates to access a huge family of nanowires/nanotubes, batteries, photodetectors, ion detection and removal, element doping, piezoelectric energy harvesting, gas sensing, thermoelectric devices and many other device applications. Various Te nanostructures with different shapes and structures will exploit the beneficial properties associated with their assembly process and nanofabrication. Finally, the prospects for future applications of Te nanomaterials are summarized and highlighted.

Simultaneous electrochemical detection of Cd(II), Pb(II), As(III) and Hg(II) ions using ruthenium(II)-textured graphene oxide nanocomposite

Simultaneous determination of Cd(II), Pb(II), As(III) and Hg(II) metal ions was carried out based on the synergistic effect of graphene oxide (GO) textured with redox active ruthenium(II) bipyridine complex ([Ru(bpy)₃]²⁺). [Ru(bpy)₃]²⁺-GO nanocomposite on the modified gold (Au) electrode acts as an electrocatalyst and favours the sensitive and selective detection of metal ions. Also, it exhibited an enhanced electron transfer rate with a low solution resistance examined by cyclic voltammetry and impedance analysis. The inherent electrochemical and electrocatalytic behaviours of [Ru(bpy)₃]²⁺-GO on gold electrode were demonstrated for simultaneous detection of heavy metal ions in water matrix. The proposed sensor exhibited a higher sensitivity towards Cd(II), Pb(II), As(III) and Hg(II) metal ions with a lowest detection limit of 2.8, 1.41, 2.3 and 1.6nM respectively. The observed detection limits were less than the World Health Organization standards and hence the developed sensor can be deployed for detecting heavy metal ions in water bodies. Simultaneous electrochemical detection of heavy metal ions in river and tap water was carried out using the developed sensor and the observed results were validated with atomic absorption spectroscopy.

Laser ablation generation of clusters from As-Te mixtures, As-Te glass nano-layers and from Au-As-Te nano-composites. Quadrupole ion trap time-of-flight mass spectrometry

RATIONALE

Arsenic tellurides have found important applications in various fields of science, but only a few gold-arsenic tellurides have been reported. Laser ablation synthesis (LAS), a suitable method for the generation of new compounds, has been used to generate clusters from As-Te mixtures, an As-Te glass and Au-As-Te nano-composites.

METHODS

Chalcogenide glass nano-layers prepared via Physical Vapour Deposition - thermal evaporation were characterized using scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDX). LAS with laser desorption ionisation quadrupole ion trap time-of-flight mass spectrometry (LDI QIT TOFMS) was used for the generation and analysis of new AuxAsmTen clusters. The stoichiometry of the clusters was determined via isotopic envelope modelling.

RESULTS

A simple procedure for the preparation of the Au-As-Te nano-composite was developed. From As-Te mixtures only five binary AsmTen clusters were generated, while from a glass layer 10 binary AsmTen clusters were identified, because during the deposition of the glass the elements reacted with each other to form a complex three-dimensional (3D) structure. Using LAS on the Au-As-Te nano-composite leads to the formation of six unary Ten (n = 1-6), 16 binary (AsmTen and AuxTen), and 31 ternary AuxAsmTen clusters.

CONCLUSIONS

LAS was demonstrated to be a useful technique for the generation of AuxAsmTen clusters in the gas phase. More AsmTen clusters were generated from the deposited glass layers than from As-Te mixtures. Most of the ternary AuxAsmTen clusters generated from the nano-composite are reported here for the first time.

Robust electrochemical analysis of As(III) integrating with interference tests: a case study in groundwater

In Togtoh region of Inner Mongolia, northern China, groundwater encountered high concentrations As contamination (greater than 50 μg L(-1)) causes an increasing concern. This work demonstrates an electrochemical protocol for robust (efficient and accurate) determination of As(III) in Togtoh water samples using Au microwire electrode without the need of pretreatment or clean-up steps. Considering the complicated conditions of Togtoh water, the efficiency of Au microwire electrode was systematically evaluated by a series of interference tests, stability and reproducibility measurements. No obvious interference on the determination of As(III) was observed. Especially, the influence of humic acid (HA) was intensively investigated. Electrode stability was also observed with long-term measurements (70 days) in Togtoh water solution and under different temperatures (0-35 °C). Excellent reproducibility (RSD:1.28%) was observed from different batches of Au microwire electrodes. The results obtained at Au microwire electrode were comparable to that obtained by inductively coupled plasma atomic emission spectroscopy (ICP-AES), indicating a good accuracy. These evaluations (efficiency, robustness, and accuracy) demonstrated that the Au microwire electrode was able to determine As(III) in application to real environmental samples.

Exploiting differential electrochemical stripping behaviors of Fe3O4 nanocrystals toward heavy metal ions by crystal cutting

This study attempts to understand the intrinsic impact of different morphologies of nanocrystals on their electrochemical stripping behaviors toward heavy metal ions. Two differently shaped Fe3O4 nanocrystals, i.e., (100)-bound cubic and (111)-bound octahedral, have been synthesized for the experiments. Electrochemical results indicate that Fe3O4 nanocrystals with different shapes show different stripping behaviors toward heavy metal ions. Octahedral Fe3O4 nanocrystals show better electrochemical sensing performances toward the investigated heavy metal ions such as Zn(II), Cd(II), Pb(II), Cu(II), and Hg(II), in comparison with cubic ones. Specifically, Pb(II) is found to have the best stripping performance on both the (100) and (111) facets. To clarify these phenomena, adsorption abilities of as-prepared Fe3O4 nanocrystals have been investigated toward heavy metal ions. Most importantly, combined with theoretical calculations, their different electrochemical stripping behaviors in view of facet effects have been further studied and enclosed at the level of molecular/atom. Finally, as a trial to find a disposable platform completely free from noble metals, the potential application of the Fe3O4 nanocrystals for electrochemical detection of As(III) in drinking water is demonstrated.

Nanomaterials-based electrochemical detection of chemical contaminants

Recent advances in the development of nanomaterials-based electrochemical sensors for environmental monitoring and food safety applications are assessed.