Superhydrophilic multilayer silica nanoparticle networks on a polymer microchannel using a spray layer-by-layer nanoassembly method

Preparation of a superhydrophilic SiO2 nanoparticles coated chitosan-sodium phytate film by a simple ethanol soaking process

The development of environmentally friendly and transparent superhydrophilic food packaging materials is essential in our daily lives. The objective of this study was to develop a simple method of preparing a superhydrophilic, transparent, and biodegradable composite film. The composite film was obtained by soaking a chitosan-sodium phytate film in an ethanol solution of SiO₂ nanoparticles. The results showed that when the chitosan-sodium phytate film was coated with SiO₂ nanoparticles that were dissolved in 75% ethanol, its water contact angle (WCA) was reduced from 100° to 3°, and the film surface was changed from a hydrophobic to a superhydrophilic. Furthermore, the oxygen transmission rate (OTR) was significantly reduced, and the mechanical properties of the film were improved. The method is easy to carry out and can be used for the potential production of superhydrophilic materials.

Ultrastable Underwater Anti-Oil Fouling Coatings from Spray Assemblies of Polyelectrolyte Grafted Silica Nanochains

Surfaces that have superhydrophilic characteristics are known to exhibit extreme oil repellency under water, which is attractive for applications including anti-fogging, water-oil separations, and self-cleaning. However, superhydrophilic surfaces can also be easily fouled and lose their extreme oil repellency, which limits their usage in practical applications. In this work, we create an anti-oil fouling coating by spray coating poly(acrylic acid) (PAA)-grafted SiO₂ nanochains (approximately 45 nm wide and 300 nm long) onto solid surfaces, forming a nanoporous film exhibiting superhydrophilicity (water contact angle in air ≈ 0°) and underwater superoleophobicity (dichloroethane contact angle ≥ 165°). The polymer-grafted nanochain assemblies exhibit extremely low contact angle hysteresis (<1°) and small adhesion hysteresis (-0.05 mN m^-1), and thus, oil can readily roll off from the surface when the coating is immersed in water. Compared to other superhydrophilic surfaces, we show that both the unique structure of spray-assembled nanochains and the hygroscopic nature of PAA are essential to enable ultrastable anti-oil fouling. Even after the PAA-grafted nanochain coating is purposely fouled by oil, oil can be readily and completely expelled and lifted-off from the coating within 10 s when placed under water. Further, we show that our coating retains underwater superoleophobicity even after being subjected to shearing under water for more than 168 h. Our approach offers a simple yet versatile method to create an ultrastable superhydrophilic and anti-oil fouling coating via a scalable manufacturing method.

Multilayered inorganic-organic microdisks as ideal carriers for high magnetothermal actuation: assembling ferrimagnetic nanoparticles devoid of dipolar interactions

The two major limitations for nanoparticle based magnetic hyperthermia in theranostics are the delivery of a sufficient number of magnetic nanoparticles (MNPs) with high heating power to specific target cells and the residence time of the MNPs at the target location. Ferromagnetic or Ferrimagnetic single domain nanoparticles (F-MNPs), with a permanent magnetic dipole, produce larger magnetic and thermal responses than superparamagnetic nanoparticles (SP-MNPs) but also agglomerate more. MNP agglomeration degrades their heating potential due to dipolar interaction effects and interferes with specific targeting. Additionally, MNPs bound to cells are often endocytosed by the cells or, in vivo, cleared out by the immune system via uptake in macrophages. Here, we present a versatile approach to engineer inorganic-polymeric microdisks, loaded with biomolecules, fluorophores and Fe3O4 F-MNPs that solves both challenges. These microdisks deliver the F-MNPs efficiently, while controlling any undesirable agglomeration and dipolar interaction, while also rendering the F-MNPs endocytosis resistant. We show that these micro-devices are suitable carriers to transport a flat assembly of F-MNPs to the cell membrane unchanged, preserving the magnetic response of the MNPs in any biological environment. The F-MNPs concentration per microdisk and degree of MNP interaction are tunable. We demonstrate that the local heat generated in microdisks is proportional to the surface density of F-MNPs when attached to the cell membrane. The key innovation in the production of these microdisks is the fabrication of a mushroom-shaped photolithographic template that enables easy assembly of the inorganic film, polymeric multilayers, and MNP cargo while permitting highly efficient lift-off of the completed microdisks. During the harvesting of the flat microdisks, the supporting mushroom-shaped templates are sacrificed. These resulting magnetic hybrid microdisks are tunable and efficient devices for magnetothermal actuation and hyperthermia.

A whole blood sample-to-answer polymer lab-on-a-chip with superhydrophilic surface toward point-of-care technology

An innovative sample-to-answer (S-to-A) polymer lab-on-a-chip (LOC) with a blood plasma separator based on asymmetric capillary force has been proposed, developed, and completely characterized for point-of-care technology (POCT) applications. A spray layer-by-layer (LbL) nanoassembly coating has been applied for the superhydrophilic surface onto the cyclic olefin copolymer (COC). Then, the developed superwetting surfaces were designed and optimized for three device applications such as lateral transportation of whole blood in the device by capillary pumping, on-chip whole blood/plasma separation with an asymmetric capillary force, and detection using a capillary-driven lateral flow colorimetric assay. Integrating three primary components of the devices, the S-to-A polymer LOC platform has been effectively confirmed for the lateral flow colorimetric assay of bovine serum albumin (BSA) from unprocessed human whole blood without an external power resource.

Solution-Processed Interfacial PEDOT:PSS Assembly into Porous Tungsten Molybdenum Oxide Nanocomposite Films for Electrochromic Applications

Electrochromic devices (ECDs) have received increased attention for applications including optoelectronics, smart windows, and low-emission displays. However, it has been recognized that the ECDs with transition-metal oxide (TMO) electrodes possess a high charge transport barrier because of their poor electrical conductivity, which limits their electrochromic performance. In this work, we addressed this limitation by utilizing a conjugated polymer to fabricate an organic-inorganic nanocomposite film that decreases the charge transport barrier of typical TMO electrodes. Using a conventional spray-layer-by-layer (spray-LbL) deposition technique, we demonstrate an electrochromic film composed of porous layers of tungsten molybdenum oxide (W_0.71Mo_0.29O₃) nanorods permeated with an interconnected conductive layer of poly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS). The introduction of PEDOT:PSS is shown to significantly reduce the charge transport barrier, allowing the nanocomposite W_0.71Mo_0.29O₃/PEDOT:PSS electrode to exhibit significantly improved electrochromic switching kinetics compared with the deposited W_0.71Mo_0.29O₃ films. Furthermore, the optical contrast of the nanocomposite electrode was observed to be superior to both pure PEDOT:PSS and W_0.71Mo_0.29O₃ electrodes, with a performance that exceeded the linearly predicted contrast of combining the pure films by 23%. The enhanced performance of the PEDOT:PSS-intercalated porous W_0.71Mo_0.29O₃ nanocomposite electrodes and the facile synthesis through a spray-LbL method demonstrate a viable strategy for preparing fast assembling high-performance nanocomposite electrodes for a wide variety of electrochemical devices.

Superlyophilic Interfaces and Their Applications

Superlyophilic interfaces denote interfaces displaying strong affinity to diverse liquids, including superhydrophilic, superoleophilic, and superamphiphilic interfaces. When coming in contact with these interfaces, water or oil droplets tend to spread completely with contact angles close to 0°, presenting versatile applications including self-cleaning, antifogging, controllable liquid transport, liquid separation, and so forth. Inspired by nature, scientists have developed various kinds of artificial superlyophilic (SLPL) interfaces in the past decades. In terms of dimensional characteristics, the artificial SLPL interfaces can be divided into four categories: i) 0D particles, whose dispersibility or catalytic performance can be notably enhanced by superlyophilicity; ii) 1D micro-/nanofibers or nanotubes/channels, which can efficiently transfer liquids with SLPL interfaces; iii) 2D flat SLPL interfaces, on which different functional molecules can be deposited uniformly, forming ultrathin and smooth films; and iv) 3D structures, which can be obtained by either constructing 0D, 1D, or 2D SLPL materials separately or directly fabricating random SLPL frameworks, and can always be used as functional coatings or bulk materials. Here, natural and artificial SLPL interfaces are briefly introduced, followed by a short discussion of the limit between lyophilicity and lyophobicity, and then a snapshot of methods to generate SLPL interfaces is given. Specific focus is placed on recent achievements of constructing SLPL interfaces from zero to three dimensions. Following that, broad applications of SLPL interfaces in commercial areas will be introduced. Finally, a short summary and outlook for future challenges in this field is presented.

Poly(methyl methacrylate) Surface Modification for Surfactant-Free Real-Time Toxicity Assay on Droplet Microfluidic Platform

Microfluidic droplet reactors have many potential uses, from analytical to synthesis. Stable operation requires preferential wetting of the channel surface by the continuous phase which is often not fulfilled by materials commonly used for lab-on-chip devices. Here we show that a silica nanoparticle (SiNP) layer coated onto a Poly(methyl methacrylate) (PMMA) and other thermoplastics surface enhances its wetting properties by creating nanoroughness, and allows simple grafting of hydrocarbon chains through silane chemistry. Using the unusual stability of silica sols at their isoelectric point, a dense SiNP layer is adsorbed onto PMMA and renders the surface superhydrophilic. Subsequently, a self-assembled dodecyltrichlorosilane (DTS) monolayer yields a superhydrophobic surface that allows the repeatable generation of aqueous droplets in a hexadecane continuous phase without surfactant addition. A SiNP-DTS modified chip has been used to monitor bacterial viability with a resazurin assay. The whole process involving sequential reagents injection, and multiplexed droplet fluorescence intensity monitoring is carried out on chip. Metabolic inhibition of the anaerobe Enterococcus faecalis by 30 mg L^-1 of NiCl₂ was detected in 5 min.

Fabrication techniques for bioinspired, mechanically-durable, superliquiphobic surfaces for water, oil, and surfactant repellency

Nature provides inspiration for liquid-repellant and low-adhesive surfaces, such as the lotus leaf and pitcher plant. While water-repellency is frequently found in nature, oil-repellency and surfactant-repellency are uncommon to nonexistent. To obtain oil- and surfactant-repellency, hierarchical, re-entrant, bioinspired surface structures along with low surface energy materials are needed. This overview presents wetting literature, common liquids and their composition, and fabrication techniques for superliquiphobic surfaces with repellency toward water, oil, and surfactant-containing liquids. Four techniques for creating such surfaces are explained in detail: nanoparticle/binder, layer-by-layer, nanoparticle-encapsulation, and liquid-impregnation. Static contact and tilt angles with water and hexadecane liquids, morphology, wear, transparency, self-cleaning, anti-smudge, and oil-water separation data are examined to compare the techniques. Data for these techniques are presented showing evidence of re-entrant geometry and the ability for these surfaces to repel surfactant-containing liquids such as shampoo and laundry detergent. The data will provide guidance in implementing superliquiphobic surfaces for self-cleaning, anti-smudge, antifouling, and low-adhesion properties for various applications including plastic packaging and biomedical devices.

CH/π Interactions for Macroscopic Interfacial Adhesion Design

Adhesion to chemically inert materials without surface modification through noncovalent interactions represents a challenging task in adhesion science. We successfully develop for the first time a strategy utilizing multiple CH/π interactions that use poly(methacrylate) with an aromatic group (H acceptor) in the ester part and polyolefin materials (H donor). The strength increases with the number of π electrons and aromatic rings. The trityl methacrylate polymer emerges as the most effective H-acceptor polymer for obtaining strong adhesion to various polyolefin materials. This work will provide not only a promising adhesion strategy that does not require surface activation for polyolefin materials, but also a novel approach using weak noncovalent interactions.

Bioinspired, roughness-induced, water and oil super-philic and super-phobic coatings prepared by adaptable layer-by-layer technique

Coatings with specific surface wetting properties are of interest for anti-fouling, anti-fogging, anti-icing, self-cleaning, anti-smudge, and oil-water separation applications. Many previous bioinspired surfaces are of limited use due to a lack of mechanical durability. Here, a layer-by-layer technique is utilized to create coatings with four combinations of water and oil repellency and affinity. An adapted layer-by-layer approach is tailored to yield specific surface properties, resulting in a durable, functional coating. This technique provides necessary flexibility to improve substrate adhesion combined with desirable surface chemistry. Polyelectrolyte binder, SiO₂ nanoparticles, and silane or fluorosurfactant layers are deposited, combining surface roughness and necessary chemistry to result in four different coatings: superhydrophilic/superoleophilic, superhydrophobic/superoleophilic, superhydrophobic/superoleophobic, and superhydrophilic/superoleophobic. The superoleophobic coatings display hexadecane contact angles >150° with tilt angles <5°, whilst the superhydrophobic coatings display water contact angles >160° with tilt angles <2°. One coating combines both oleophobic and hydrophobic properties, whilst others mix and match oil and water repellency and affinity. Coating durability was examined through the use of micro/macrowear experiments. These coatings display transparency acceptable for some applications. Fabrication via this novel combination of techniques results in durable, functional coatings displaying improved performance compared to existing work where either durability or functionality is compromised.

Mechanically durable, superoleophobic coatings prepared by layer-by-layer technique for anti-smudge and oil-water separation

Superoleophobic surfaces are of interest for anti-fouling, self-cleaning, anti-smudge, low-drag, anti-fog, and oil-water separation applications. Current bioinspired surfaces are of limited use due to a lack of mechanical durability. A so-called layer-by-layer approach, involving charged species with electrostatic interactions between layers, can provide the flexibility needed to improve adhesion to the substrate while providing a low surface tension coating at the air interface. In this work, a polyelectrolyte binder, SiO₂ nanoparticles, and a fluorosurfactant are spray deposited separately to create a durable, superoleophobic coating. Polydiallyldimethylammonium chloride (PDDA) polyelectrolyte was complexed with a fluorosurfactant layer (FL), which provides oil repellency while being hydrophilic. This oleophobic/superhydrophilic behavior was enhanced through the use of roughening with SiO₂ particles resulting in a superoleophobic coating with hexadecane contact angles exceeding 155° and tilt angles of less than 4°. The coating is also superhydrophilic, which is desirable for oil-water separation applications. The durability of these coatings was examined through the use of micro- and macrowear experiments. These coatings currently display characteristics of transparency. Fabrication of these coatings via the layer-by-layer technique results in superoleophobic surfaces displaying improved durability compared to existing work where either the durability or the oil-repellency is compromised.