Hydrogen-bonding-facilitated layer-by-layer growth of ultrathin organic semiconducting films

Structure-Property Relationships in Bithiophenes with Hydrogen-Bonded Substituents

The use of crystal engineering to control the supramolecular arrangement of π-conjugated molecules in the solid-state is of considerable interest for the development of novel organic electronic materials. In this study, we investigated the effect of combining of two types of supramolecular interaction with different geometric requirements, amide hydrogen bonding and π-interactions, on the π-overlap between calamitic π-conjugated cores. To this end, we prepared two series of bithiophene diesters and diamides with methylene, ethylene, or propylene spacers between the bithiophene core and the functional groups in their terminal substituents. The hydrogen-bonded bithiophene diamides showed significantly denser packing of the bithiophene cores than the diesters and other known α,ω-disubstituted bithiophenes. The bithiophene packing density reach a maximum in the bithiophene diamide with an ethylene spacer, which had the smallest longitudinal bithiophene displacement and infinite 1D arrays of electronically conjugated, parallel, and almost linear N-H⋅⋅⋅O=C hydrogen bonds. The synergistic hydrogen bonding and π-interactions were attributed to the favorable conformation mechanics of the ethylene spacer and resulted in H-type spectroscopic aggregates in solid-state absorption spectroscopy. These results demonstrate that the optoelectronic properties of π-conjugated materials in the solid-state may be tailored systematically by side-chain engineering, and hence that this approach has significant potential for the design of organic and polymer semiconductors.

Ultra-low pressure cellulose-based nanofiltration membrane fabricated on layer-by-layer assembly for efficient sodium chloride removal

Cellulose is a renewable, biodegradable, biocompatible, and sustainable material. A bamboo cellulose-based nanofiltration membrane (LBL-NF-CS/BCM) was prepared with a combination of layer-by-layer assembly and spraying methods. The chemical structure, morphology, and surface charge of the resultant LBL-NF-CS/BCM composite membranes were characterized based on Thermo Gravimetric Analysis (TGA), X-ray diffraction (XRD), Scanning Electron Microscopy (SEM), Atomic Force Microscopy (AFM), and X-ray Photoelectron Spectroscopy Scanning (XPS). The nanofiltration performance of the LBL-NF-CS/BCM composite membranes was evaluated using 500 ppm NaCl solutions under 0.3 MPa pressure. It was found that the LBL-NF-CS/BCM composite membranes had a rejection rate of about 36.11 % against a 500 ppm NaCl solution under the conditions tested, and membrane flux of about 12.08 L/(m² h) was reached. The combined layer-by-layer assembly and spraying provides a scalable and convenient process concept for nanofiltration membrane fabrication.

Nonuniform Growth of Composite Layer-by-Layer Assembled Coatings via Three-Dimensional Expansion of Hydrophobic Magnetite Nanoparticles

Nanocomposite coatings are promising for a range of practical applications, and layer-by-layer assembly (LbL) is a versatile tool for nanocomposite formation. However, conventional LbL is a quite laborious procedure taking a lot of time to reach a sufficient thickness of the coatings required for practical applications. Herein, we proposed a novel variant of the LbL approach based on the deposition of hydrophilic polyelectrolyte molecules from a polar solvent and hydrophobic magnetite nanoparticles (NPs) from a nonpolar dispersion medium with an intermediate washing in the same polar solvent. The composite multilayers formed in this way exhibit exponential growth of the thickness and mass. On the basis of quartz crystal microbalance (QCM), Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), atomic force microscopy (AFM), and surface profile measurements, we propose a model describing the driving force of multilayer formation and the factors leading to nonlinear growth of their mass and thickness. The results allow one to expand the understanding of the mechanism of the LbL assembly in order to form multifunctional nanocomposites in a more efficient way.

Enhancing the performance of solution-processed bulk-heterojunction solar cells using hydrogen-bonding-induced self-organization of small molecules

Small-molecule solar-cell performance is highly sensitive to the crystallinity and intermolecular connectivity of the molecules. In order to enhance the crystallinity for the solution-processed small molecule, it is possible to make use of carboxylic acid end-functional groups to drive hydrogen-bonding-induced π-π stacking of conjugated molecules. Herein, we report the synthesis and characterization of quarterthiophenes with carboxylic acid as end groups. The formation of hydrogen bonds between neighboring acid groups gives rise to a pseudo-polymeric structure in the molecules, which leads to substantial improvement in the organization and crystallinity of the active layers. This resulted in a four-fold increase in the hole mobility and a two-fold improvement in the performance of the solar cell device for the acid-functionalized molecule, compared to its ester analogue. More importantly, optimal device performance for the acid-functionalized molecule was achieved for the as-cast film, thereby reducing the reliance on thermal annealing and solvent additives.