Template and silica interlayer tailorable synthesis of spindle-like multilayer α-Fe2O3/Ag/SnO2 ternary hybrid architectures and their enhanced photocatalytic activity

Simultaneous electrochemical determination of uric acid and hypoxanthine at a TiO2/graphene quantum dot-modified electrode

A TiO2/graphene quantum dots composite (TiO2/GQDs) obtained by in situ synthesis of GQDs, derived from coffee grounds, and peroxo titanium complexes was used as electrode modifier in the simultaneous electrochemical determination of uric acid and hypoxanthine. The TiO2/GQDs material was characterized by photoluminescence, X-ray diffraction, Raman spectroscopy, high-resolution transmission electron microscopy, and energy-dispersive X-ray mapping. The TiO2/GQDs-GCE exhibits better electrochemical activity for uric acid and hypoxanthine than GQDs/GCE or TiO2/GCE in differential pulse voltammetry (DPV) measurements. Under optimized conditions, the calibration plots were linear in the range from 1.00 to 15.26 μM for both uric acid and hypoxanthine. The limits of detection of this method were 0.58 and 0.68 μM for uric acid and hypoxanthine, respectively. The proposed DPV method was employed to determine uric acid and hypoxanthine in urine samples with acceptable recovery rates.

Highly efficient and recyclable novel spindles Fe2O3@SiO2/In2O3 nanomagnetic catalyst designed for green synthesis of azomethine compounds

A novel and reusable nanomagnetic catalyst, Fe2O3@SiO2/In2O3, was synthesized by a facile chemical approach in three successive steps. The nanocatalyst was characterized by FT-IR, XRD, SEM, EDX, TEM, and VSM. The XRD pattern displays the characteristic peaks of Fe2O3 and SiO2, accompanied by new peaks assigned to different planes of In2O3 that confirm the formation of In2O3 on the surface of Fe2O3@SiO2 core/shell spindles. The TEM micrographs show spindle-like particles of Fe2O3 covered with SiO2 shell, and the In2O3 nanoparticles in an average diameter of 20 nm are hung on the surface of the Fe2O3@SiO2. The nanomagnetic catalyst Fe2O3@SiO2/In2O3 was used for the transformation of the (4-nitrophenyl)-1-phenyl-1H-pyrazole-5-amine, and chalcones derivatives, into valuable azomethine compounds of 3-(substituted)-1-(pyridine-2-yl)allylidene)-3-(4-nitrophenyl)-1-phenyl-1H-pyrazole-5-amine with high rate and efficient catalyst recovery. The yield obtained through the catalytic route reached 90–95% in shorter reaction times compared with uncatalyzed reaction method.

Graphical abstract

Photodynamic and antibacterial studies of template-assisted Fe2O3-TiO2 nanocomposites

Fe₂O₃-TiO₂ (FT) nanocomposites were successfully synthesized by template-assisted precipitation reaction using Polyvinylpyrrolidone-Polyethylene glycol (PVP-PEG), Tween-80 (T-80) and Cetyltrimethylammomium bromide (CTAB) as templates. The prepared nanocomposites were characterized by XRD, SEM, EDX, UV-DRS, FT-IR, and FT-Raman spectroscopic analysis. The photohemolysis studies were done in human erythrocytes and the cell viability studies were done in HeLa cell lines under the irradiation of an LED light source. The photodynamic studies were performed under two different experimental conditions, such as varying concentrations as well as a time of irradiation. The nanocomposites exhibit significant photodynamic activity via the generation of reactive oxygen species (ROS) under the light source. The results show that the PVP-PEG-assisted Fe₂O₃-TiO₂ (FT-PVP-PEG) nanocomposite has more potential for photodynamic activity in the presence of an LED light source. Also, the antibacterial effect of the samples was investigated against gram-negative bacteria (Escherichia coli). Among all nanocomposites, FT-PVP-PEG shows remarkable antibacterial activity against E. coli. Moreover, the template-assisted nanocomposites protect the biomolecules from the toxicity generated by the magnetic nanoparticles (NPs). The template-assisted FT nanocomposites for the field of photodynamic activity have been experimentally shown for the first time.

Studies on Synthesis and Characterization of Fe3O4@SiO2@Ru Hybrid Magnetic Composites for Reusable Photocatalytic Application

Degradation of dye pollutants by the photocatalytic process has been regarded as the most efficient green method for removal organic dyes from contaminated water. The current research work describes the synthesis of Fe3O4@SiO2@Ru hybrid magnetic composites (HMCs) and their photocatalytic degradation of two azo dye pollutants, methyl orange (MO) and methyl red (MR), under irradiation of visible light. The synthesis of Fe3O4@SiO2@Ru HMCs involves three stages, including synthesis of Fe3O4 magnetic microspheres (MMSs), followed by silica (SiO2) coating to get Fe3O4@SiO2 MMSs, and then incorporation of presynthesized Ru nanoparticles (~3 nm) onto the surface of Fe3O4@SiO2 HMCs. The synthesized HMCs were characterized by XRD, FTIR, TEM, EDS, XPS, BET analysis, UV-DRS, PL spectroscopy, and VSM to study the physical and chemical properties. Furthermore, the narrow band gap energy of the HMC photocatalyst is a significant parameter that provides high photocatalytic properties due to the high light adsorption. The photocatalytic activity of synthesized Fe3O4@SiO2@Ru HMCs was assessed by researching their ability to degrade the aqueous solution of MO and MR dyes under visible radiation, and the influence of various functional parameters on photocatalytic degradation has also been studied. The results indicate that the photocatalytic degradation of MO and MR dyes is more than 90%, and acid media favors better degradation. The probable mechanism of photodegradation of azo dyes by Fe3O4@SiO2@Ru HMC catalysts has been proposed. Furthermore, due to the strong ferromagnetic Fe3O4 core, HMCs were easily separated from the solution after the photocatalytic degradation process for reuse. Also, the photocatalytic activity after six cycles of use is greater than 90%, suggesting the stability of the synthesized Fe3O4@SiO2@Ru HMCs.

Research Progress in the Multilayer Hydrogels

Hydrogels have been widely used in many fields including biomedicine and water treatment. Significant achievements have been made in these fields due to the extraordinary properties of hydrogels, such as facile processability and tissue similarity. However, based on the in-depth study of the microstructures of hydrogels, as a result of the enhancement of biomedical requirements in drug delivery, cell encapsulation, cartilage regeneration, and other aspects, it is challenge for conventional homogeneous hydrogels to simultaneously meet different needs. Fortunately, heterogeneous multilayer hydrogels have emerged and become an important branch of hydrogels research. In this review, their main preparation processes and mechanisms as well as their composites from different resources and methods, are introduced. Moreover, the more recent achievements and potential applications are also highlighted, and their future development prospects are clarified and briefly discussed.

Core-shell nanostructures: a simplest two-component system with enhanced properties and multiple applications

With the pace of time, synthesis of nanomaterials has paved paths to blend two or more materials having different properties into hybrid nanoparticles. Therefore, it has become possible to combine two different functionalities in a single nanoparticle and their properties can be enhanced or modified by coupling of two different components. Core-shell technology has now represented a new trend in analytical sciences. Core-shell nanostructures are in demand due to their specific design and geometry. They have internal core of one component (metal or biomolecules) surrounded by a shell of another component. Core-shell nanoparticles have great importance due to their high thermal stability, high solubility and lower toxicity. In this review, recent progress in development of new and sophisticated core-shell nanostructures has been explored. The first section covers introduction throwing light on basics of core-shell nanoparticles. Following section classifies core-shell nanostructures into single core/shell, multicore/single shell, single core/multishell and multicore/multishell nanostructures. Next main section gives a brief description on types of core-shell nanomaterials followed by processes for the synthesis of core-shell nanostructures. Ultimately, the final section focuses on the application areas such as drug delivery, bioimaging, solar cell applications etc.

Silver Quantum Dot Decorated 2D-SnO2 Nanoflakes for Photocatalytic Degradation of the Water Pollutant Rhodamine B

Decoration of 2D semiconductor structures with heterogeneous metal quantum dots has attracted considerable attention due to advanced optical, electrical, and catalytic properties that result from the large surface-to-volume ratio associated with these structures. Herein, we report on silver quantum dot decorated 2D SnO2 nanoflakes for the photocatalytic abatement of water effluents, the synthesis of which was achieved through a straightforward and mild hydrothermal procedure. The photocatalysts were systematically investigated using UV-Vis, XRD, electron microscopy (SEM, HR-TEM), EDX, XPS and FTIR. The photocatalytic activity of the nanostructures was evaluated for the abatement of water pollutant rhodamine B (RhB), under light irradiation. The mild hydrothermal synthesis (100 °C) proved highly efficient for the production of large scale Ag quantum dot (QD)/SnO2 nanoflakes for a novel photocatalytic application. The decoration of SnO2 with Ag QDs significantly enhances the synergetic charge transfer, which diminishes the photo-induced electron-hole reunion. Moreover, the plasmonic effect from Ag QDs and 2D-SnO2 structures acts as an electron tank to collect the photo-induced electrons, generating a Schottky barrier between the SnO2 structures and quantum dots. Overall, this resulted in a facile and efficient degradation of RhB, with a rate double that of pristine SnO2.

Degradation of antibiotics in multi-component systems with novel ternary AgBr/Ag3PO4@natural hematite heterojunction photocatalyst under simulated solar light

Abatement of antibiotics from aquatic systems is of great importance but remains a challenge. Herein, we prepared ternary AgBr/Ag₃PO₄@natural hematite (AgBr/Ag₃PO₄@NH) heterojunction composite via a simple route for the photocatalytic degradation of antibiotic pollutants. By adjusting the dose of Ag species, four products with different Ag content (denoted as Ag_0.5BrPFe, Ag₁BrPFe, Ag_1.5BrPFe, and Ag₂BrPFe) were developed. Among them, Ag_1.5BrPFe exhibited the best photocatalytic activity. Four antibiotics (i.e. ciprofloxacin (CIP), norfloxacin (NOR), sulfadiazine (SDZ), and tetracycline (TTC)) could be degraded with synthesized Ag_1.5BrPFe in multi-component systems. Water matrix indexes including solution pH, coexisting anions, humic acids exhibited distinct effects on the degradation process. The results revealed that the degradation process was accelerated at acidic conditions while depressed at basic conditions. Superoxide radical and hole were detected by in situ electron spin resonance technique and played the dominant roles. The degradation pathway TTC was tentatively established followed with the identification of the degradation intermediates and computational analysis. This work would shed light on the photocatalytic degradation mechanism of organic pollutants by the AgBr/Ag₃PO₄@NH composite.

Catalytic Application and Mechanism Studies of Argentic Chloride Coupled Ag/Au Hollow Heterostructures: Considering the Interface Between Ag/Au Bimetals

For an economical use of solar energy, photocatalysts that are sufficiently efficient, stable, and capable of harvesting light are required. Composite heterostructures composed of noble metals and semiconductors exhibited the excellent in catalytic application. Here, 1D Ag/Au/AgCl hollow heterostructures are synthesized by galvanic replacement reaction (GRR) from Ag nanowires (NWs). The catalytic properties of these as-obtained Ag/Au/AgCl hollow heterostructures with different ratios are investigated by reducing 4-nitrophenol (Nip) into 4-aminophenol (Amp) in the presence of NaBH₄, and the influence of AgCl semiconductor to the catalytic performances of Ag/Au bimetals is also investigated. These hollow heterostructures show the higher catalytic properties than pure Ag NWs, and the AgCl not only act as supporting materials, but the excess AgCl is also the obstacle for contact of Ag/Au bimetals with reactive species. Moreover, the photocatalytic performances of these hollow heterostructures are carried out by degradation of acid orange 7 (AO7) under UV and visible light. These Ag/Au/AgCl hollow heterostructures present the higher photocatalytic activities than pure Ag NWs and commercial TiO₂ (P25), and the Ag/Au bimetals enhance the photocatalytic activity of AgCl semiconductor via the localized surface plasmon resonance (LSPR) and plasmon resonance energy transfer (PRET) mechanisms. The as-synthesized 1D Ag/Au/AgCl hollow heterostructures with multifunction could apply in practical environmental remedy by catalytic manners.

NIR light-activated upconversion semiconductor photocatalysts

Harvesting of near infrared (NIR) light in the abundant and environmentally friendly solar spectrum is particularly significant to enhance the utilization rate of the cleanest energy on earth. Appreciating the unique nonlinear optical properties of upconversion materials for converting low-energy incident light into high-energy radiation, they become the most promising candidates for fabricating NIR light-active photocatalytic systems by integrating with semiconductors. The present review summarizes recent NIR light-active photocatalytic systems based on a sequence of NaYF₄-based, fluoride-based, oxide-based and Ln³⁺ ion-doped semiconductor-based photocatalysts for degradation of organic molecules. In addition, we provide an in-depth analysis of various photocatalytic mechanisms and enhancement effects for efficient photo-redox performance of different upconversion semiconductor photocatalysts. We envision that this review can inspire multidisciplinary research interest in rational design and fabrication of efficient full-spectrum active (UV-visible-NIR) photocatalytic systems and their wider applications in solar energy conversion.

One-Pot Synthesis of Pd-Based Ternary Pd@CdS@TiO2 Nanoclusters via a Solvothermal Route and Their Catalytic Reduction Efficiency toward Toxic Hexavalent Chromium

In this work, we report the synthesis of Pd-based ternary Pd@CdS@TiO₂ nanocomposites using molecular precursors. This method is facile, less time-consuming, and cost-effective. This catalyst is prepared within 2 h by a solvothermal route using molecular precursors. Information about the phase, morphologies, elemental mapping, and composition of the nanocomposites was obtained using various characterization techniques. The catalytic activity of the as-prepared Pd-based ternary Pd@CdS@TiO₂ nanocomposites exhibits effective reduction efficiency for the conversion of toxic Cr(VI) to Cr(III) using formic acid as a reducing agent within 5-7 min. To the best of our knowledge, this is the first report on Pd-based ternary Pd@CdS@TiO₂ nanocomposites prepared by a solvothermal route and used as catalysts toward the reduction of hexavalent chromium at room temperature.

Enhanced visible-light photocatalytic degradation by Mn3O4/CeO2 heterojunction: a Z-scheme system photocatalyst

A novel 1-D Mn₃O₄/CeO₂ heterojunction exhibited enhanced photocatalytic degradation via a Z-scheme system.

Zinc Oxide Coating Effect for the Dye Removal and Photocatalytic Mechanisms of Flower-Like MoS2 Nanoparticles

Flower-like MoS₂ nanoparticles (NPs) consist of ultra-thin MoS₂ nanosheets are synthesized via a facile one-pot hydrothermal method. The MoS₂/ZnO p-n heterostructure is formed by coating n-type ZnO on the surface of flower-like MoS₂ NPs through the seed-mediate route and post-annealing treatment. The effects for the dye removal and photocatalytic performances after ZnO coating are systematically investigated. The results demonstrated that the coating of ZnO nanoparticles has a positive promotion to the photodegrading properties while negative effect on the adsorption capacity of the MoS₂/ZnO heterostructures. The related mechanisms on the relationship of adsorption capacity and photocatalysis are discussed in detail.

Corn-like, recoverable γ-Fe2O3@SiO2@TiO2 photocatalyst induced by magnetic dipole interactions

Corn-like, γ-Fe2O3@SiO2@TiO2 core/shell heterostructures were synthesized by a modified solvothermal reduction combined with a sol-gel method. SiO2 shells were first deposited on monodisperse Fe3O4 microspheres by a sol-gel method. Fe3O4@SiO2@TiO2 corn-like heterostructures were then obtained by sequential TiO2 coating, during which the magnetic dipolar interactions induced the anisotropic self-assembly process. After annealing at 350 °C, the crystalized TiO2 enhanced photocatalytic activity, while Fe3O4 was converted to γ-Fe2O3. The corn-like γ-Fe2O3@SiO2@TiO2 photocatalyst can be recycled and reused by magnet extraction. Despite the photocatalytic activity decreased with each cycle, it can be completely recovered by moderate heating at 200 °C.

Ru(ii)-Metal complex immobilized mesoporous SBA-15 hybrid for visible light induced photooxidation of chlorophenolic compounds in aqueous medium

The work focuses on room-temperature photocatalytic degradation of phenolic compounds by Ru(ii)-complex immobilized mesoporous silica SBA-15 under visible light in an aqueous medium.

Designed synthesis and surface engineering strategies of magnetic iron oxide nanoparticles for biomedical applications

Iron oxide nanoparticles (NPs) hold great promise for future biomedical applications because of their magnetic properties as well as other intrinsic properties such as low toxicity, colloidal stability, and surface engineering capability. Numerous related studies on iron oxide NPs have been conducted. Recent progress in nanochemistry has enabled fine control over the size, crystallinity, uniformity, and surface properties of iron oxide NPs. This review examines various synthetic approaches and surface engineering strategies for preparing naked and functional iron oxide NPs with different physicochemical properties. Growing interest in designed and surface-engineered iron oxide NPs with multifunctionalities was explored in in vitro/in vivo biomedical applications, focusing on their combined roles in bioseparation, as a biosensor, targeted-drug delivery, MR contrast agents, and magnetic fluid hyperthermia. This review outlines the limitations of extant surface engineering strategies and several developing strategies that may overcome these limitations. This study also details the promising future directions of this active research field.

Engineering the Morphology and Configuration of Ternary Heterostructures for Improving Their Photocatalytic Activity

Heteronanomaterials composed of suitable semiconductors enable the direct conversion from solar power into clean and renewable energy. Ternary heterostructures with appropriate configuration and morphology possess rich and varied properties, especially for improving the photocatalytic activity and stability synchronously. However, suitable ternary heterostructure prototypes and facile while effective strategy for modulating their morphology and configuration are still scarce. Herein, various ternary ZnS-CdS-Zn(1-x)Cd(x)S heterostructures with tunable morphology (0 to 2 D) and semiconductor configurations (randomly distributed, interface mediated, and quantum dots sensitized core@shell heterostructures) were facilely synthesized via one-pot hydrothermal method resulting from the different molecular structures of the amine solvents. Semiconductor morphology, especially configuration of the ternary heterostructure, shows dramatic effect on their photocatalytic activity. The CdS sensitized porous Zn(1-x)CdxS@ZnS core@shell takes full advantage of ZnS, Zn(1-x)Cd(x)S and CdS and shows the maximal photocatalytic H2-production rate of 100.2 mmol/h/g and excellent stability over 30 h. This study provides some guidelines for the design and synthesis of high-performance ternary heterostructure via modulation of semiconductor configuration and morphology using one-pot method.

Synthesis of urchin-like Fe3O4@SiO2@ZnO/CdS core–shell microspheres for the repeated photocatalytic degradation of rhodamine B under visible light

Magnetically retrievable Fe₃O₄@SiO₂@ZnO/CdS microspheres with a well-designed core–shell structure and excellent visible-irradiation photocatalytic performance were successfully synthesized.

Effects of structural, optical and ferromagnetic states on the photocatalytic activities of Sn–TiO2 nanocrystals

Ferromagnetic Sn–TiO₂ nanocrystals were newly developed, and their photocatalytic activity showed structural, luminescent and magnetic dependences.

Organic pollutants removal in wastewater by heterogeneous photocatalytic ozonation

Heterogeneous photocatalysis and ozonation are robust advanced oxidation processes for eliminating organic contaminants in wastewater. The combination of these two methods is carried out in order to enhance the overall mineralization of refractory organics. An apparent synergism between heterogeneous photocatalysis and ozonation has been demonstrated in many literatures, which gives rise to an improvement of total organic carbon removal. The present overview dissects the heterogeneous catalysts and the influences of different operational parameters, followed by the discussion on the kinetics, mechanism, economic feasibility and future trends of this integrated technology. The enhanced oxidation rate mainly results from a large amount of hydroxyl radicals generated from a synergistically induced decomposition of dissolved ozone, besides superoxide ion radicals and the photo-induced holes. Six reaction pathways possibly exist for the generation of hydroxyl radicals in the reaction mechanism of heterogeneous photocatalytic ozonation.

Recent progress in magnetic iron oxide-semiconductor composite nanomaterials as promising photocatalysts

Photocatalytic degradation of toxic organic pollutants is a challenging tasks in ecological and environmental protection. Recent research shows that the magnetic iron oxide-semiconductor composite photocatalytic system can effectively break through the bottleneck of single-component semiconductor oxides with low activity under visible light and the challenging recycling of the photocatalyst from the final products. With high reactivity in visible light, magnetic iron oxide-semiconductors can be exploited as an important magnetic recovery photocatalyst (MRP) with a bright future. On this regard, various composite structures, the charge-transfer mechanism and outstanding properties of magnetic iron oxide-semiconductor composite nanomaterials are sketched. The latest synthesis methods and recent progress in the photocatalytic applications of magnetic iron oxide-semiconductor composite nanomaterials are reviewed. The problems and challenges still need to be resolved and development strategies are discussed.

Fabrication of porous g-C3N4/Ag/Fe2O3 composites with enhanced visible light photocatalysis performance

Porous graphitic carbon nitride (pg-C₃N₄) synthetized by pyrolysis of urea was hybridized with Ag-doped Fe₂O₃ to form a visible-light-driven photocatalyst pg-C₃N₄/Ag/Fe₂O₃via a simple chemical adsorption method.

Comparative study on sandwich-structured SiO2@Ag@SnO2 and inverse SiO2@SnO2@Ag: key roles of shell ordering and interfacial contact in modulating the photocatalytic properties

Sandwich-structured SiO₂@Ag@SnO₂ and inverse SiO₂@SnO₂@Ag using SiO₂ spheres as cores have been systematically synthesized through hydrothermal treatment.

Tube-like α-Fe2O3@Ag/AgCl heterostructure: controllable synthesis and enhanced plasmonic photocatalytic activity

Plasmonic photocatalysts coupled with semiconductors are one of the most popular combinations in environmental remediation applications.

Synthesis and characterization of Pt magnetic nanocatalysts with a TiO2 or CeO2 layer

The Pt magnetic nanocatalysts with a TiO₂ or CeO₂ layer have been fabricated successfully.

Tube-like ternary α-Fe2O3@SnO2@Cu2O sandwich heterostructures: synthesis and enhanced photocatalytic properties

Heterogeneous photocatalysis is of great interest for environmental remediation applications. However, fast recombination of photogenerated electron-hole pair and a low utilization rate of sunlight hinder the commercialization of currently available semiconductor photocatalysts. In this regard, we developed a unique ternary single core-double shell heterostructure that consists of α-Fe2O3@SnO2@Cu2O. This heterostructure exhibits a tube-like morphology possessing broad spectral response for the sunlight due to the combination of narrow bandgap and wide bandgap semiconductors forming a p-n heterojunction. To fabricate such a short nanotube (SNT), we used an anion-assisted hydrothermal route for deposition of α-Fe2O3, a seed-mediated deposition strategy for SnO2, and finally an aging process to deposit a Cu2O layer to complete the tube-like ternary α-Fe2O3@SnO2@Cu2O single core-double shell heterostructures. The morphology, composition, and photocatalytic properties of those ternary core-shell-shell heterostructures were characterized by various analytical techniques. These ternary heterostructures exhibited enhanced photocatalytic properties on the photodegradation of the organic dye of Rhodamine B (RhB) under simulated sunlight irradiation. The origin of enhanced photocatalytic activity is due to the synergistic effect of broad spectral response by combining narrow bandgap and wide bandgap semiconductors and, hence, an efficient charge separation of photogenerated electron-hole pairs facilitated through the p-n heterojunction. Furthermore, our unique structure provides an insight on the fabrication and controlled preparation of multilayer heterostructural photocatalysts that have intriguing properties.

Self-assemble SnO2@TiO2 porous nanowire–nanosheet heterostructures for enhanced photocatalytic property

In this study, semi-conducting one-dimensional SnO₂@TiO₂ heterostructures with unique properties are realized, suited to application in the photocatalysis field.