Synthesis of PCDTBT-based fluorinated polymers for high open-circuit voltage in organic photovoltaics: towards an understanding of relationships between polymer energy levels engineering and ideal morphology control

Fluorinated Benzothiadiazole-Based Polymers for Organic Solar Cells: Progress and Prospects

The integration of fluorinated benzothiadiazole (FBT) into donor-acceptor (D-A) copolymers represents a major advancement in the field of organic solar cells (OSCs). The fluorination process effectively fine-tunes the energy levels, reduces the highest occupied molecular orbital levels, and enhances the open-circuit voltages of the polymers. Furthermore, fluorination improves molecular packing and crystallinity, which significantly boosts the charge transport and overall device performance. This review provides a detailed analysis of the progress made with FBT-based polymers in OSCs, classifying these materials according to their copolymerization units. It discusses the design strategies and structure-property relationships that have emerged as well as the current challenges and future directions for optimizing these polymers. By offering a comprehensive overview of the existing research, this review aims to facilitate the development of high-performance FBT-based organic photovoltaic materials, ultimately contributing to the advancement of sustainable energy solutions.

The Influence of the Side Chain Structure on the Photostability of Low Band Gap Polymers

Side chains play an important role in the photo-oxidation process of low band gap (LBG) polymers. For example, it has been shown that their photostability can be increased by the introduction of aromatic-oxy-alkyl links. We studied the photostability of prototypical LBG polymers with alkyl and oxyalkyl side chains during irradiation with white light (AM 1.5 conditions) in dry air using UV/vis and IR spectroscopy. Though its degradation kinetics were distinctly affected by the presence or absence of oxygen in the structure of the side chains, in particular cases, the stability was more affected by the presence of linear or branched side chains. Moreover, we showed that the exact position of the alkyl/oxyalkyl side chain at the polymer backbone could be crucial. Although minor effects of chemical modifications on the electronic parameters (ionization potential and gap) were observed, the molecular orientation, determined by polarization modulation-infrared reflection-absorption spectroscopy (PMIRRAS), could be affected. The aggregation and crystallinity of these polymers may distinctly affect their stability.

Structural-Functional Properties of Asymmetric Fluoro-Alkoxy Substituted Benzothiadiazole Homopolymers with Flanked Chalcogen-Based Heterocycles

The synthesis and characterization of asymmetric alkoxy- are reported, fluoro-benzothiadiazole (BT) acceptor core derivatized with a series of six different heterocycles (selenophene, thiophene, furan, 5-thiazole, 2-thiazole and 2-oxazole). The effect of the flanked-heterocycles containing different chalcogen atoms of the six homopolymers (HPX) is studied using optical, thermal, electrochemical, and computational analysis. Computational calculations indicate a strong relationship between the most stable conformation for each homopolymer and their bearing heterocycle, thus homopolymers HPSe', HPTp', HPFu', and HPTzC5, adopted the syn-syn and syn-anti conformations due to their noncovalent interactions with shorter distances, while HPTzC2' and HPOx' demonstrate preference for the anti-anti conformation. Optical property studies of the homopolymers reveal a strong red-shift in solution and film upon exchanging the chalcogen atom from Oxygen < Sulfur < Selenium in HPFu, HPTp, and HPSe, respectively. In addition, deeper highest occupied molecular orbital (HOMO) energy levels are observed when the donor-acceptor moieties (HPSe, HPTp, and HPFu) are substituted for the acceptor-acceptor systems such as HPTzC5, HPTzC2, and HPOx. Improved packing and morphology are exhibited for the donor-acceptor homopolymers. Thus, having a flanked heterocycle containing different chalcogen-atoms in polymeric systems is one way of tuning the physicochemical properties of conjugated materials for optoelectronic applications.

Large Transconductance of Electrochemical Transistors Based on Fluorinated Donor-Acceptor Conjugated Polymers

Organic electrochemical transistors (OECTs) have enormous potential for use in biosignal amplifiers, analyte sensors, and neuromorphic electronics owing to their exceptionally large transconductance. However, it is challenging to simultaneously achieve high charge carrier mobility and volumetric capacitance, the two most important figures of merit in OECTs. Herein, a method of achieving high-performance OECT with donor-acceptor conjugated copolymers by introducing fluorine units is proposed. A series of cyclopentadithiophene-benzothiadiazole (CDT-BT) copolymers for use in high-performance OECTs with enhanced charge carrier mobility (from 0.65 to 1.73 cm²·V^-1·s^-1) and extended volumetric capacitance (from 44.8 to 57.6 F·cm^-3) by fluorine substitution is achieved. The increase in the volumetric capacitance of the fluorinated polymers is attributed to either an increase in the volume at which ions can enter the film or a decrease in the effective distance between the ions and polymer backbones. The fluorine substitution increases the backbone planarity of the CDT-BT copolymers, enabling more efficient charge carrier transport. The fluorination strategy of this work suggests the more versatile use of conjugated polymers for high-performance OECTs.

Hussein A. A Mini Review on the Development of Conjugated Polymers: Steps towards the Commercialization of Organic Solar Cells

This review article covers the synthesis and design of conjugated polymers for carefully adjusting energy levels and energy band gap (EBG) to achieve the desired photovoltaic performance. The formation of bonds and the delocalization of electrons over conjugated chains are both explained by the molecular orbital theory (MOT). The intrinsic characteristics that classify conjugated polymers as semiconducting materials come from the EBG of organic molecules. A quinoid mesomeric structure (D-A ↔ D⁺ = A^-) forms across the major backbones of the polymer as a result of alternating donor-acceptor segments contributing to the pull-push driving force between neighboring units, resulting in a smaller optical EBG. Furthermore, one of the most crucial factors in achieving excellent performance of the polymer is improving the morphology of the active layer. In order to improve exciton diffusion, dissociation, and charge transport, the nanoscale morphology ensures nanometer phase separation between donor and acceptor components in the active layer. It was demonstrated that because of the exciton's short lifetime, only small diffusion distances (10-20 nm) are needed for all photo-generated excitons to reach the interfacial region where they can separate into free charge carriers. There is a comprehensive explanation of the architecture of organic solar cells using single layer, bilayer, and bulk heterojunction (BHJ) devices. The short circuit current density (J_sc), open circuit voltage (V_oc), and fill factor (FF) all have a significant impact on the performance of organic solar cells (OSCs). Since the BHJ concept was first proposed, significant advancement and quick configuration development of these devices have been accomplished. Due to their ability to combine great optical and electronic properties with strong thermal and chemical stability, conjugated polymers are unique semiconducting materials that are used in a wide range of applications. According to the fundamental operating theories of OSCs, unlike inorganic semiconductors such as silicon solar cells, organic photovoltaic devices are unable to produce free carrier charges (holes and electrons). To overcome the Coulombic attraction and separate the excitons into free charges in the interfacial region, organic semiconductors require an additional thermodynamic driving force. From the molecular engineering of conjugated polymers, it was discovered that the most crucial obstacles to achieving the most desirable properties are the design and synthesis of conjugated polymers toward optimal p-type materials. Along with plastic solar cells (PSCs), these materials have extended to a number of different applications such as light-emitting diodes (LEDs) and field-effect transistors (FETs). Additionally, the topics of fluorene and carbazole as donor units in conjugated polymers are covered. The Stille, Suzuki, and Sonogashira coupling reactions widely used to synthesize alternating D-A copolymers are also presented. Moreover, conjugated polymers based on anthracene that can be used in solar cells are covered.

Doped Vertical Organic Field-Effect Transistors Demonstrating Superior Bias-Stress Stability

Bias-stress stability is essential to the practical applications of organic field-effect transistors (OFETs), yet it remains a challenge issue in conventional planar OFETs. Here, the feasibility of achieving high bias-stress stability in vertical structured OFETs (VOFETs) in combination with doping techniques is demonstrated. VOFETs with silver nanowires as source electrodes are fabricated and the device performance is optimized by understanding the influence of device parameters on performance. Then, the bias-stress stability of the optimized PDVT-10 VOFETs is investigated and found to be superior to the corresponding planar OFETs, which is attributed to reduced trapping effects of gate dielectrics in the VOFETs. Moreover, the bias-stress stability can be further improved by doping PDVT-10 to passivate bulk traps. Consequently, the characteristic time of doped PDVT-10 VOFETs extracted from stretched exponential equation is found to be over four times larger than that of the planar PDVT-10 OFETs under the same bias-stress conditions. These results present the promising applications of VOFETs as well as an effective strategy to achieve highly bias-stress stable OFETs.

Preparation and Characterization of Quinoxaline-Pyrene-Based Conjugated Copolymers for Organic Photovoltaic Devices

In this study, two novel conjugated polymers, poly(4,5,9,10-tetrakis((2-ethylhexyl)oxy]pyrene-alt-2,3-bis(3-(octyloxy)phenyl)-5,8-di(2-thienyl)-6,7-difluoroquinoxaline) (PPyQxff) and poly(4,5,9,10-tetrakis((2-ethylhexyl)oxy)pyren-alt-2,3-bis(3-(octyloxy)phenyl)-5,8-di(2-thienyl)quinoxaline) (PPyQx), consisting of quinoxaline units with and without fluorine substituents, as electron-accepting moieties and pyrene flanked with dithienyl units as electron-donating moieties were prepared via Stille polymerization reactions for use as electron donor materials in bulk heterojunction (BHJ) solar cells. PPyQxff and PPyQx were characterized by X-ray powder diffraction (XRD), gel permeation chromatography (GPC), thermogravimetric analysis (TGA), cyclic voltammetry (CV), UV−VIS absorption, and nuclear magnetic resonance (NMR) spectroscopy. PPyQxff and PPyQx revealed excellent solution processability in common organic solvents. PPyQxff and PPyQx presented decomposition temperatures above 300 °C. The inclusion of F atoms to the quinoxaline moiety made a slight reduction in the highest occupied molecular orbital (HOMO) level, relative to the unfluorinated polymer, but had no impact on the lowest unoccupied molecular orbital (LUMO) level. PPyQxff and PPyQx exhibited similar physical properties with strong and broad absorbance from 400 to 700 nm and an optical band-gap energy of 1.77 eV. The X-ray powder diffraction study indicated that PPyQxff possessed a reduced π–π stacking distance relative to PPyQx.

Chlorination: An Effective Strategy for High-Performance Organic Solar Cells

This work summarizes recent developments in polymer solar cells (PSCs) prepared by a chlorination strategy. The intrinsic property of chlorine atoms, the progress of chlorinated polymers and small molecules, and the synergistic effect of chlorination with other methods to elevate solar conversions are discussed. Halogenation of donor-acceptor (D-A) materials is an effective method to improve the performance of PSCs, which mainly affects the push-pull of electrons between donor and acceptor units due to their strong electron-withdrawing capabilities. Although chlorine is less electronegative than fluorine, it can form very strong noncovalent interactions, such as Cl···S and Cl···π interactions, because its empty 3d orbits can help to accept the electron pairs or π electrons. This synergistic effect of electronegativity together with the empty 3d orbits of chlorine atoms leads to increased intramolecular and intermolecular interactions and a much stronger capability to down-shift the molecular energy levels. This work is intended to support a better understanding of the chlorination strategy to modify the material properties, and thus improve the performance of solar devices. Eventually, it will provide the research community with a clearer pathway to choose proper substitution methods according to different situations for high and stable solar energy conversion.

Impact of Polymer Backbone Fluorination on the Charge Generation/Recombination Patterns and Vertical Phase Segregation in Bulk Heterojunction Organic Solar Cells

Incorporating fluorine (-F) substituents along the main-chains of polymer donors and acceptors is an effective strategy toward efficient bulk-heterojunction (BHJ) solar cells. Specifically, F-substituted polymers often exhibit planar conformations, leading to favorable packing, and electronic coupling. However, the effects of fluorine substituents on the charge generation and recombination characteristics that determine the overall efficiency of BHJ active layers remain critically important issues to examine. In this report, two PBDT[2X]T polymer analogs -poly[4,8-bis((2-ethylhexyl)oxy)benzo[1,2-b:4, 5-b']dithiophene-thiophene] [PBDT[2H]T] and its F-substituted counterpart poly[4,8-bis((2-ethylhexyl)oxy)benzo[1,2-b:4,5-b']dithiophene-3,4-difluoro-thiophene] [PBDT[2F]T]-are studied to systematically examine how -F substituents impact the blend morphology, charge generation, carrier recombination and extraction in BHJ solar cells. Considering the large efficiency differences between PBDT[2H]T- and PBDT[2F]T-based BHJ devices, significant emphasis is given to characterizing the out-of-plane morphology of the blend films as vertical phase-separation characteristics are known to have dramatic effects on charge transport and carrier extraction in polymer-fullerene BHJ solar cells. Herein, we use electron energy loss spectroscopy (EELS) in tandem with charge transport characterization to examine PBDT[2X]T-fullerene blend films. Our analyses show that PBDT[2H]T and PBDT[2F]T possess very different charge generation, recombination and extraction characteristics, resulting from distinct aggregation, and phase-distribution within the BHJ blend films.

D–A–A′-type asymmetric small molecules based on triphenylamine-diketopyrrolopyrrole/5,6-difluoro-2,1,3-benzothiadiazole backbone for organic photovoltaic materials

Five novel asymmetric OSMs are designed and synthesized with a tuned terminal group and central core, and the effect of their structure on their photoelectrical properties are investigated.

The structural properties of silicon-doped DBrTBT/ZnSe solar cell materials: a theoretical study

A new molecular design for solar cell materials is reported for the silicon-doped 4,7-di(5-bromothiophen-2-yl)-2,1,3-benzothiadiazole adsorbed on ZnSe(100) and ZnSe(111) surfaces.

Tuning the optoelectronic properties of oligothiophenes for solar cell applications by varying the number of cyano and fluoro substituents for solar cell applications: A theoretical study

Chemical modifications through substitution are observed to be effective in controlling the optoelectronic properties of various polymers for different applications. In this study, density functional theory–based calculations are employed to investigate the optoelectronic properties of several oligothiophenes based on poly(3-hexylthiophene-2,5-diyl) by varying the number of fluoro and cyano substituents attached. The resulting structures of the polymer derivatives are affected by the electrostatic interactions between the cyano or fluoro groups and the adjacent thiophene unit. Of the two, cyano substitution results in much lower frontier orbital energies for the same number of substituents. It was observed that a decrease in the highest occupied molecule orbital and lowest unoccupied molecular orbital energies correlates very strongly with the number of cyano and fluoro substituents. The effect of the cyano and fluoro groups on the frontier orbitals is also demonstrated and observed to correlate strongly with a lowering of the highest occupied molecule orbital and lowest unoccupied molecular orbital energies as the number of substituents is varied. The predicted solar cell characteristics reveal that most cyano and fluoro derivatives will have improved characteristics compared to unsubstituted poly(3-hexylthiophene-2,5-diyl). This theoretical study shows that by varying the number of electron-withdrawing substituents, the optoelectronic properties may be tuned for solar cell applications.

Synthesis of Cyano-Substituted Conjugated Polymers for Photovoltaic Applications

Three conjugated polymers, in which the electron-donating (D) 5-alkylthiophene-2-yl-substitued benzodithiophene was linked to three different electron-accepting (A) moieties, i.e., benzothiadiazole (BT), diphenylquinoxaline (DPQ), and dibenzophenazine (DBP) derivative via thiophene bridge, were synthesized using the Stille coupling reaction. In particular, the strong electron-withdrawing cyano (CN) group was incorporated into the A units BT, DPQ, and DBP to afford three D-A type target polymers PB-BTCN, PB-DPQCN, and PB-DBPCN, respectively. Owing to the significant contribution of the CN-substituent, these polymers exhibit not only low-lying energy levels of both the highest occupied molecular orbital and the lowest unoccupied molecular orbital, but also reduced bandgaps. Furthermore, to investigate the photovoltaic properties of polymers, inverted-type devices with the structure of ITO/ZnO/Polymer:PC71BM/MoO3/Ag were fabricated and analyzed. All the polymer solar cells based on the three cyano-substituted conjugated polymers showed high open-circuit voltages (Voc) greater than 0.89 V, and the highest power conversion efficiency of 4.59% was obtained from the device based on PB-BtCN with a Voc of 0.93 V, short-circuit current of 7.36 mA cm-2, and fill factor of 67.1%.

Efficient design and structural modifications for tuning the photoelectric properties of small-molecule acceptors in organic solar cells

Five novel molecules have been synthesized to investigate how to tune molecular photoelectric properties efficiently through structural design and modifications.

Effects of Fluoro Substitution on the Electrochromic Performance of Alternating Benzotriazole and Benzothiadiazole-Based Donor⁻Acceptor Type Copolymers

Two new donor⁻acceptor type electrochromic copolymers containing non-fluorinated and di-fluorinated benzothiadiazole analogues, namely P(TBT-TBTh) and P(TBT-F-TBTh), were synthesized successfully through chemical polymerization. Both polymers were measured by cyclic voltammetry, UV-vis spectroscopy, colorimetry and thermogravimetric analysis to study the influence of fluoro substitution on the electrochromic performance. The results demonstrated that the two polymer films displayed well-defined redox peaks in pairs during the p-type doping, and showed distinct color change from dark gray blue to light green for P(TBT-TBTh) with the band gap of 1.51 eV, and from gray blue to celandine green for P(TBT-F-TBTh) with the band gap of 1.58 eV. P(TBT-F-TBTh) presented lower highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO) energy levels, and better stability than P(TBT-TBTh). It was found that the two fluorine atoms participated in not only inductive effects but also mesomeric effects in the P(TBT-F-TBTh) backbone. In addition, the polymers exhibited high optical contrasts, short response time, and favorable coloration efficiency, especially in the near infrared region. The characterization results indicated that the two reported polymers can be the potential choice as electrochromic materials.

Influence of Simultaneous Tuning of Molecular Weights and Alkyl Substituents of Poly(thienoisoindigo-alt-naphthalene)s on Morphology and Change Transport Properties

To simultaneously assess the impact of molecular weight (M_n) and alkyl substituent variations of polymers on the structural and optoelectronic properties, herein, we conduct a systematic study of a series of poly(thienoisoindigo-alt-naphthalene) (PTIIG-Np)-based polymers containing different alkyl substituents (2-hexyldecyl (HD), 2-octyldodecyl (OD), and 2-decyltetradecyl (DT) chains) and M_n's (low (L) and high (H)). All of the polymers produce almost identical energy levels, whereas their optical spectra show a clear dependence on M_n's and the alkyl substituents. Interestingly, increasing the alkyl substituent sizes of the polymers steadily increases the lamellar d-spacings (d₁₀₀), ultimately leading to a densely packed lamellar structure for PTIIGHD-Np. In addition, both H-PTIIGOD-Np and H-PTIIGDT-Np exhibit larger π-stacking crystallites than the corresponding low-M_n polymers, while for PTIIGHD-Np, their size increases in the low-M_n batch. Ultimately, L-PTIIGHD-Np shows the best hole mobility of 1.87 cm² V^-1 s^-1 in top-gate and bottom-contact organic field-effect transistors (OFETs) with a poly(methyl methacrylate), which is nearly 1 order of magnitude higher than other polymers tested in this study. Our results demonstrate that the simultaneous M_n and alkyl substituent engineering of the polymers can optimize their film morphology to produce high-performance OFETs.

Dithieno[3,2-b:2',3'-d]pyrrole-benzo[c][1,2,5]thiadiazole conjugate small molecule donors: effect of fluorine content on their photovoltaic properties

Two new small molecule donors, namely ICT4 and ICT6 with D₁-A-D₂-A-D₁ architecture having 2,4-bis(2-ethylhexyl)-4H-dithieno[3,2-b:2',3'-d]pyrrole (EHDTP, D₁) and 4,8-bis((2-ethylhexyl)oxy)benzo[1,2-b:4,5-b']dithiophene (OBDT, D₂) as the terminal and central donor, and benzo[c][1,2,5]thiadiazole (BT for ICT4) and 5,6-difluorobenzo[c][1,2,5]thiadiazole (F2BT for ICT6) as the acceptor (A) moieties, are synthesized and their optical, electronic and photovoltaic properties are investigated. Both ICT4 and ICT6 have considerable solubility in various solvents and possess efficient light absorption ability [ε (×10⁵ mol^-1 cm^-1) is 0.99 and 1.06, respectively for ICT4 and ICT6] and appropriate frontier molecular orbital energy offsets with [6,6]-phenyl-C₇₁-butyric acid methyl ester (PC₇₁BM). Bulk heterojunction solar cells (BHJSCs) are fabricated using ICT4/ICT6 and PC₇₁BM as donors and acceptors, respectively and BHJSCs with two-step annealed (thermal followed by solvent vapor annealing) active layers of ICT4 and ICT6 show overall power conversion efficiencies (PCEs) of 5.46% and 7.91%, respectively. The superior photovoltaic performance of the ICT6 based BHJSCs is due to the favourable morphology with a nanoscale interpenetrating network in the ICT6:PC₇₁BM active layer induced by the fluorine atoms on the BT acceptor, which significantly enhances the dissociation of excitons, charge transport and the charge collection efficiency, and suppresses bimolecular recombination in the BHJ. The observed higher PCE of 7.91% indicates that ICT6 is one of the best BT based donor material for small molecular BHJSCs.

Fluorine-Induced Highly Reproducible Resistive Switching Performance: Facile Morphology Control through the Transition between J- and H-Aggregation

Improving the reproducibility and air-endurance of organic resistance switching (RS) devices, in particular multilevel-cell RS devices, is critical for the confirmation of its competency to realize big data storage capability. However, such enhancement still remains challenging. In this report, we demonstrated that fluorine (F)-embedding should be an effective way to enhance the overall performance of RS devices. Four new azo-cored analogues (IDAZO, FIDAZO, F₂IDAZO, and F₄IDAZO) have been designed and synthesized. These four compounds have similar structures with different numbers of F substituents. Interestingly, UV-vis measurements reveal that upon F-embedding, an exceptional transition from molecular J-aggregation to H-aggregation is achieved. As a result, the morphology of RS films becomes more and more uniform, as determined by AFM and XRD. Meanwhile, the hydrophobicity of RS film is promoted, which further improves the device atmospheric stability. The total RS reproducibility increases to 96% (the uppermost value), and the tristage RS reproducibility rises to 64%, accompanied by a more stable OFF state and lower logic SET voltages. Our study suggests F-embedding would be a promising strategy to achieve highly reproducible and air-endurable organic multilevel-cell RS devices.

Investigation of Fluorination on Donor Moiety of Donor-Acceptor 4,7-Dithienylbenzothiadiazole-Based Conjugated Polymers toward Enhanced Photovoltaic Efficiency

It is known that fluorination on π-conjugated donor-acceptor (D-A) polymers can significantly affect the optoelectronic properties and fluorination on A moiety has been well established for design of efficient photovoltaic materials. For example, polymers based on 4,7-dithienyl-5,6-difluorobenzothiadiazole (DTffBT) have been intensively investigated and exhibited excellent performance, but the corresponding DTBT-based polymers without fluorine often display an unfavorable efficiency. With the purpose of improving photovoltaic efficiency of DTBT-based D-A polymers, we design three polymers PDTBT-TxfBT (x = 0, 1, 2) with fluorination on D moiety (TxfBT) and systematically investigate fluorination on the photophysical/electrochemical and photovoltaic properties. The results show that polymer solar cells (PSCs) based on PDTBT-TBT exhibit moderate power conversion efficiency (PCE) of 5.84%. However, the bis-fluorination on TffBT moiety (PDTBT-TffBT) can greatly enhance the molecular planarity and intermolecular interaction, improve the charge transport and heterojunction morphology, and further suppress the charge recombination losses. PSCs based on PDTBT-TffBT demonstrate obviously improved photovoltaic efficiency with the best PCE up to 7.53% without any processing additives, which ranks among the top DTBT-based PSCs. However, it should be noted that unsymmetrical fluorination on TfBT moiety (PDTBT-TfBT) impairs the regularity of polymer backbone and intermolecular interaction, increases the recombination losses, and seriously reduces the short-circuit current density and efficiency (5.44%). The results exhibit that fluorination on D moiety is a helpful strategy for design high-performance photovoltaic materials and the regularity of fluorination is crucial to improving efficiencies.

Impact of Fluorine Substituents on π-Conjugated Polymer Main-Chain Conformations, Packing, and Electronic Couplings

Taking the π-conjugated polymers PBDT[2X]T (X = H, F) as model systems, the effects of fluorine substitution on main-chain conformations, packing, and electronic couplings are examined. This combination of molecular dynamics simulations and solid-state NMR shows that a higher propensity for backbone planarity in PBDT[2F]T leads to more pronounced, yet staggered, chain stacking, which generally leads to higher electronic couplings and binding energy between neighboring chains.

Impact of Backbone Fluorination on π-Conjugated Polymers in Organic Photovoltaic Devices: A Review

Solution-processed bulk heterojunction solar cells have experienced a remarkable acceleration in performances in the last two decades, reaching power conversion efficiencies above 10%. This impressive progress is the outcome of a simultaneous development of more advanced device architectures and of optimized semiconducting polymers. Several chemical approaches have been developed to fine-tune the optoelectronics and structural polymer parameters required to reach high efficiencies. Fluorination of the conjugated polymer backbone has appeared recently to be an especially promising approach for the development of efficient semiconducting polymers. As a matter of fact, most currently best-performing semiconducting polymers are using fluorine atoms in their conjugated backbone. In this review, we attempt to give an up-to-date overview of the latest results achieved on fluorinated polymers for solar cells and to highlight general polymer properties’ evolution trends related to the fluorination of their conjugated backbone.

Effect of fluorination pattern and extent on the properties of PCDTBT derivatives

Fluorination of PCDTBT derivatives at different positions and to different extents causes major changes in their properties.

Medium bandgap copolymers based on carbazole and quinoxaline exceeding 1.0 V open-circuit voltages

Given the desire for superior VOC values in PSCs, we have designed and synthesized a series of ‘medium bandgap’ donor–acceptor (D–A) copolymers containing carbazole (Cz) and quinoxaline (Qx) (PCzDT-Qx, PCzDT-fQx, and PCzDT-ffQx).

2,2′-Bis(trifluoromethyl)biphenyl as a building block for highly ambient-stable, amorphous organic field-effect transistors with balanced ambipolarity

Ambipolar and annealing-free OFETs with high ambient-stability are achieved by introducing 2,2′-bis(trifluoromethyl)biphenyl as the acceptor.

D–A conjugated polymers based on thieno[3,2-b]indole (TI) and 2,1,3-benzodiathiazole (BT) derivatives: synthesis, characterization and side-chain influence on photovoltaic properties

Thieno[3,2-b]indole (TI) derivatives were developed via Cadogan annulation for constructing D–A copolymers. Their performance in photovoltaic cells were finely tuned by side-chain engineering.

Enhanced high-open circuit voltage in fluorinated benzoselenadiazole-based polymer solar cells

Three new donor–acceptor copolymers (PCDTBSe, PCDTFBSe, and PCDTDFBSe) were designed and synthesized with 2,7-carbazole as the donor (D) unit and benzoselenadiazole (BSe), monofluoro-benzoselenadiazole, and difluoro-benzoselenadiazole as the acceptor (A) units, respectively. The structure–property relationship of these polymers was elucidated in bulk heterojunction polymer solar cells. All the polymers were fully characterized and exhibited good thermal stability and broad absorption. The highest occupied molecular orbitals (HOMOs) of the PCDTBSe (−5.29 eV), PCDTFBSe (−5.32 eV), and PCDTDFBSe (−5.35 eV) were decreased by incorporating fluorine atoms on the polymer backbone. The low-lying HOMO energy level suggested that the polymers would exhibit high open circuit voltage ( VOC) when blended with fullerene as the electron acceptor. Solar cell based on PCDTFBSe displayed a power conversion efficiency of 1.09% with a short-circuit current density ( JSC) of 4.29 mA cm−2, a VOC of 0.78 V, and a fill factor (FF) of 32.51%, under the illumination of AM1.5G, 100 mW cm−2.

Monosubstitution at the 4-position of 2,7-carbazolylene expands the structural design and fundamental properties of D-π-A copolymers for organic photovoltaic cells

A 4-octyloxy-carbazole-2,7-diyl unit was newly developed, and was combined with dithienylbenzothiadiazole derivatives by using the Suzuki-coupling reaction to synthesize good processable D-π-A copolymers.

Highly efficient photovoltaics and field-effect transistors based on copolymers of mono-fluorinated benzothiadiazole and quaterthiophene: synthesis and effect of the molecular weight on device performance

A D–A conjugated polymer based on mono-fluorinated benzothiadiazole (FBT) was designed and synthesized, and high performance photovoltaics and FETs were achieved.

Effect of fluorination on the performance of poly(thieno[2,3-f]benzofuran-co-benzothiadiazole) derivatives

Three polymers named PTBFBT-0F, PTBFBT-1F, PTBFBT-2F were synthesized, and the effects of the different numbers of fluorine atoms on the photophysics and photovoltaic properties were investigated. A PCE of 5% with PTBFBT-2F as the donor was obtained.

Impact of fluorine substitution upon the photovoltaic properties of benzothiadiazole-fluorene alternate copolymers

The impact of replacing hydrogen with fluorine in efficient moderate-band gap alternating benzothiadiazole-fluorene copolymers is studied. The optical, electrochemical, thermal and photovoltaic properties in bulk heterojunction solar cells are investigated.

Fluorinated benzothiadiazole (BT) groups as a powerful unit for high-performance electron-transporting polymers

Over the past few years, one of the most remarkable advances in the field of polymer solar cells (PSCs) has been the development of fluorinated 2,1,3-benzothiadiazole (BT)-based polymers that lack the solid working principles of previous designs, but boost the power conversion efficiency. To assess a rich data set for the influence of the fluorinated BT units on the charge-transport characteristics in organic field-effect transistors (OFETs), we synthesized two new polymers (PDPP-FBT and PDPP-2FBT) incorporating diketopyrrolopyrrole (DPP) and either single- or double-fluorinated BT and thoroughly investigated them via a range of techniques. Unlike the small differences in the absorption properties of PDPP-FBT and its nonfluorinated analogue (PDPP-BT), the introduction of doubly fluorinated BT into the polymer backbone induces a noticeable change in its optical profiles and energy levels, which results in a slightly wider bandgap and deeper HOMO for PDPP-2FBT, relative to the others. Grazing incidence X-ray diffraction (GIXD) analysis reveals that both fluorinated polymer films have long-range orders along the out-of-plane direction, and π-π stacking in the in-plane direction, implying semicrystalline lamellar structures with edge-on orientations in the solid state. Thanks to the strong intermolecular interactions and highly electron-deficient π-systems driven by the inclusion of F atoms, the polymers exhibit electron mobilities of up to 0.42 and 0.30 cm2 V(-1) s(-1) for PDPP-FBT and PDPP-2FBT, respectively, while maintaining hole mobilities higher than 0.1 cm2 V(-1) s(-1). Our results highlight that the use of fluorinated BT blocks in the polymers is a promising molecular design strategy for improving electron transporting performance without sacrificing their original hole mobility values.