"Click" immobilization of a VEGF-mimetic peptide on decellularized endothelial extracellular matrix to enhance angiogenesis

Click method preserves but EDC method compromises the therapeutic activities of the peptide-activated hydrogels for critical ischemic vessel regeneration

Peptide-functionalized hydrogel is one of commonly used biomaterials to introduce hydrogel-induced vessel regeneration. Despite many reports about the discoveries of high-active peptides (or ligands) for regeneration, the study on the conjugating methods for the hydrogel functionalization with peptides is limited. Here, we compared the vasculogenic efficacy of the peptide-functionalized hydrogels prepared by two commonly used conjugating methods, 1-ethyl-3-(3-dimethylamino propyl) carbodiimide (EDC) and Click methods, through cell models, organ-on-chips models, animal models, and RNA sequencing analysis. Two vascular-related cell types, the human umbilical vein endothelial cells (HUVECs) and the adipose-derived stem cells (ADSCs), have been cultured on the hydrogel surfaces prepared by EDC/Click methods. It showed that the hydrogels prepared by Click method supported the higher vasculogenic activities while the ones made by EDC method compromised the peptide activities on hydrogels. The vasculogenesis assays further revealed that hydrogels prepared by Click method promoted a better vascular network formation. In a critical ischemic hindlimb model, only the peptide-functionalized hydrogels prepared by Click method successfully salvaged the ischemic limb, significantly improved blood perfusion, and enhanced the functional recoveries (through gait analysis and animal behavior studies). RNA sequencing studies revealed that the hydrogels prepared by Click method significantly promoted the PI3K-AKT pathway activation compared to the hydrogels prepared by EDC method. All the results suggested that EDC method compromised the functions of the peptides, while Click method preserved the vascular regenerating capacities of the peptides on the hydrogels, illustrating the importance of the conjugating method during the preparation of the peptide-functionalized hydrogels.

Crosslinking strategies of decellularized extracellular matrix in tissue regeneration

By removing the immunogenic cellular components through various decellularization methods, decellularized extracellular matrix (dECM) is considered a promising material in the field of tissue engineering and regenerative medicine with highly preserved physicochemical properties and superior biocompatibility. However, decellularization treatment can lead to some loss of structural integrity, mechanical strength, degradation stability, and biological performance of dECM biomaterials. Therefore, physical and chemical crosslinking methods are preferred to restore or even improve the biomechanical properties, stability, and bioactivity, and to achieve a delicate balance between degradation of the implanted biomaterial and regeneration of the host tissue. This review provides an overview of dECM biomaterials, and describes and compares the mechanisms and characteristics of commonly used crosslinking methods for dECM, with a focus on the potential applications of versatile dECM-based biomaterials derived from skin, cardiac tissues (pericardium, heart valves, myocardial tissue), blood vessels, liver, and kidney, modified with different chemical crosslinking reagents, in tissue and organ regeneration.

Vascularized polypeptide hydrogel modulates macrophage polarization for wound healing

Wound repair involves a sophisticated process that includes angiogenesis, immunoregulation and collagen deposition. However, weak revascularization performance and the lack of biochemical cues to trigger immunomodulatory function currently limit biomaterial applications for skin regeneration and tissue engineering. Herein, we fabricate a new bioactive polypeptide hydrogel (QK-SF) constituted by silk fibroin (SF) and a vascular endothelial growth factor mimetic peptide KLTWQELYQLKYKGI (QK) for tissue regeneration by simultaneously promoting vascularization and macrophage polarization. Our results showed that this QK-SF hydrogel can be prepared via an easy manufacturing process, and exhibited good gel stability and low cytotoxicity to cultured human umbilical vein endothelial cells (HUVECs) via both live/dead and cell counting kit-8 assays. Importantly, this QK-SF hydrogel triggered macrophage polarization from M1 into M2, as exemplified by the enhanced expression of the M2 marker and decreased expression of the M1 marker in RAW264.7 cells. Furthermore, the QK-SF hydrogel showed high capacity for inducing endothelial growth, migration and angiogenesis, which were proved by increased expression of angiogenesis-related genes in HUVECs. Consistent with in vitro findings, in vivo data show that the QK-SF hydrogel promoted M2 polarization, keratinocyte differentiation, and collagen deposition in the mouse skin wound model in immunohistochemistry assay. Furthermore, this QK-SF hydrogel can reduce inflammation, induce angiogenesis and promote wound healing as exemplified by the increased vessel formation and decreased wound area in the mouse skin wound model. Altogether, these results indicate that the bioactive QK-SF hydrogel plays dual functional roles in promoting angiogenesis and immunoregulation for tissue regeneration. STATEMENT OF SIGNIFICANCE: The QK-SF hydrogel plays dual functional roles in promoting angiogenesis and immunoregulation for tissue repair and wound healing. The QK-SF hydrogel can be prepared via an easy manufacturing process, and exhibited good gel stability and low cytotoxicity to cultured HUVECs. The QK-SF hydrogel triggered macrophage polarization from M1 into M2. The QK-SF hydrogel showed high capacity for inducing endothelial growth, migration and angiogenesis. The QK-SF hydrogel promoted M2 polarization, keratinocyte differentiation, and collagen deposition.

Decellularization in Tissue Engineering and Regenerative Medicine: Evaluation, Modification, and Application Methods

Reproduction of different tissues using scaffolds and materials is a major element in regenerative medicine. The regeneration of whole organs with decellularized extracellular matrix (dECM) has remained a goal despite the use of these materials for different purposes. Recently, decellularization techniques have been widely used in producing scaffolds that are appropriate for regenerating damaged organs and may be able to overcome the shortage of donor organs. Decellularized ECM offers several advantages over synthetic compounds, including the preserved natural microenvironment features. Different decellularization methods have been developed, each of which is appropriate for removing cells from specific tissues under certain conditions. A variety of methods have been advanced for evaluating the decellularization process in terms of cell removal efficiency, tissue ultrastructure preservation, toxicity, biocompatibility, biodegradability, and mechanical resistance in order to enhance the efficacy of decellularization methods. Modification techniques improve the characteristics of decellularized scaffolds, making them available for the regeneration of damaged tissues. Moreover, modification of scaffolds makes them appropriate options for drug delivery, disease modeling, and improving stem cells growth and proliferation. However, considering different challenges in the way of decellularization methods and application of decellularized scaffolds, this field is constantly developing and progressively moving forward. This review has outlined recent decellularization and sterilization strategies, evaluation tests for efficient decellularization, materials processing, application, and challenges and future outlooks of decellularization in regenerative medicine and tissue engineering.

Fabrication of a bio-instructive scaffold conferred with a favorable microenvironment allowing for superior implant osseointegration and accelerated in situ vascularized bone regeneration via type H vessel formation

The potential translation of bio-inert polymer scaffolds as bone substitutes is limited by the lack of neovascularization upon implantation and subsequently diminished ingrowth of host bone, most likely resulted from the inability to replicate appropriate endogenous crosstalk between cells. Human umbilical vein endothelial cell-derived decellularized extracellular matrix (HdECM), which contains a collection of angiocrine biomolecules, has recently been demonstrated to mediate endothelial cells(ECs) - osteoprogenitors(OPs) crosstalk. We employed the HdECM to create a PCL (polycaprolactone)/fibrin/HdECM (PFE) hybrid scaffold. We hypothesized PFE scaffold could reconstitute a bio-instructive microenvironment that reintroduces the crosstalk, resulting in vascularized bone regeneration. Following implantation in a rat femoral bone defect, the PFE scaffold demonstrated early vascular infiltration and enhanced bone regeneration by microangiography (μ-AG) and micro-computational tomography (μ-CT). Based on the immunofluorescence studies, PFE mediated the endogenous angiogenesis and osteogenesis with a substantial number of type H vessels and osteoprogenitors. In addition, superior osseointegration was observed by a direct host bone-PCL interface, which was likely attributed to the formation of type H vessels. The bio-instructive microenvironment created by our innovative PFE scaffold made possible superior osseointegration and type H vessel-related bone regeneration. It could become an alternative solution of improving the osseointegration of bone substitutes with the help of induced type H vessels, which could compensate for the inherent biological inertness of synthetic polymers.

Hydrogels for Treatment of Oral and Maxillofacial Diseases: Current Research, Challenge, and Future Directions

Oral and maxillofacial diseases such as infection and trauma often involve various organs and tissues, resulting in structural defects, dysfunctions and/or adverse effects on facial appearance. Hydrogels have been applied...

Polymer-Coated Magnetic Microspheres Conjugated with Growth Factor Receptor Binding Peptides Enable Cell Sorting

The separation and sorting of human cells is an important step in the bioprocessing of cell-based therapeutics. Heterogeneous mixtures of cells must be sorted to isolate the desired cell type and purify the final product. This process is often achieved by antibody-based sorting techniques. In this work, we demonstrate that magnetic microspheres may be functionalized with peptides that selectively bind to cells on the basis of their relative concentration of specific surface proteins. Five-micrometer-magnetic microspheres were coated with the synthetic copolymer PVG (poly(poly(ethylene glycol)methyl ether methacrylate-ran-vinyl dimethyl azlactone-ran-glycidyl methacrylate) and functionalized with the vascular endothelial growth factor receptor binding peptide (VRBP), which binds to the vascular endothelial growth factor receptor (VEGFR). These microspheres exhibited low cytotoxicity and bind to cells depending on their relative surface protein expression. Finally, coated, magnetic microspheres were used to separate heterogeneous populations of cells dependent on their VEGFR expression through magnetic-assisted cell sorting (MACS), demonstrating that peptide-based cell sorting mechanisms may be useful in the bioprocessing of human-cell-based products.

Study on a 3D-Bioprinted Tissue Model of Self-Assembled Nanopeptide Hydrogels Combined With Adipose-Derived Mesenchymal Stem Cells

Objective: This study aimed to observe the cell growth status and multidirectional differentiation ability in a 3D-bioprinted tissue model of self-assembled nanopeptides and human adipose-derived mesenchymal stem cells (Ad-MSCs).

Methods: Primary Ad-MSCs were isolated, cultured, and identified by flow cytometry. Tissue models were printed via 3D bioprinting technology using a “biological ink” consisting of a mixed solution of self-assembled nanopeptides and Ad-MSCs. Ad-MSCs were induced into osteogenic, adipogenic, and endothelial differentiation and compared with the control groups by staining.

Results: The nanopeptide fiber was 10–30 nm in diameter and 200–500 nm in length under the atomic-force microscope. It had the characteristics of nano-scale materials. Flow cytometry showed that the isolated and cultured cells were positive for CD29 (98.51%), CD90 (97.87%), and CD166 (98.32%) but did not express CD31 (1.58%), CD34 (2.42%), CD45 (2.95%), or human leukocyte antigen (HLA)-DR (0.53%), consistent with the immunophenotype of Ad-MSCs. Then, a tissue model was printed using the biological ink, followed by induction of differentiation of Ad-MSCs within the tissue model. Alizarin red S staining showed the formation of calcium nodules in the osteogenesis induction experimental group, and oil red O stained lipid droplets in Ad-MSCs in the adipogenesis induction experimental group, whereas the two control groups were not stained.

Conclusion: Ad-MSCs from primary cultures have the characteristics of stem cells. Self-assembled nanopeptide hydrogel is a good tissue engineering material that can serve as an extracellular matrix. Ad-MSCs in the 3D-printed tissue model using a biological ink consisting of a mixed solution of self-assembled nanopeptides and Ad-MSCs grew well and still had strong differentiation ability.

Light-Regulated Angiogenesis via a Phototriggerable VEGF Peptidomimetic

The application of growth factor based therapies in regenerative medicine is limited by the high cost, fast degradation kinetics, and the multiple functions of these molecules in the cell, which requires regulated delivery to minimize side effects. Here a photoactivatable peptidomimetic of the vascular endothelial growth factor (VEGF) that allows the light-controlled presentation of angiogenic signals to endothelial cells embedded in hydrogel matrices is presented. A photoresponsive analog of the 15-mer peptidomimetic Ac-KLTWQELYQLKYKGI-NH₂ (abbreviated ^P QK) is prepared by introducing a 3-(4,5-dimethoxy-2-nitrophenyl)-2-butyl (DMNPB) photoremovable protecting group at the Trp4 residue. This modification inhibits the angiogenic potential of the peptide temporally. Light exposure of ^P QK modified hydrogels provide instructive cues to embedded endothelial cells and promote angiogenesis at the illuminated sites of the 3D culture, with the possibility of spatial control. ^P QK modified photoresponsive biomaterials offer an attractive approach for the dosed delivery and spatial control of pro-angiogenic factors to support regulated vascular growth by just using light as an external trigger.

High-throughput screening and rational design of biofunctionalized surfaces with optimized biocompatibility and antimicrobial activity

Peptides are widely used for surface modification to develop improved implants, such as cell adhesion RGD peptide and antimicrobial peptide (AMP). However, it is a daunting challenge to identify an optimized condition with the two peptides showing their intended activities and the parameters for reaching such a condition. Herein, we develop a high-throughput strategy, preparing titanium (Ti) surfaces with a gradient in peptide density by click reaction as a platform, to screen the positions with desired functions. Such positions are corresponding to optimized molecular parameters (peptide densities/ratios) and associated preparation parameters (reaction times/reactant concentrations). These parameters are then extracted to prepare nongradient mono- and dual-peptide functionalized Ti surfaces with desired biocompatibility or/and antimicrobial activity in vitro and in vivo. We also demonstrate this strategy could be extended to other materials. Here, we show that the high-throughput versatile strategy holds great promise for rational design and preparation of functional biomaterial surfaces.

Engineering a Chemically Defined Hydrogel Bioink for Direct Bioprinting of Microvasculature

Vascularizing printed tissues is a critical challenge in bioprinting. While protein-based hydrogel bioinks have been successfully used to bioprint microvasculature, their compositions are ill-defined and subject to batch variation. Few studies have focused on engineering proangiogenic bioinks with defined properties to direct endogenous microvascular network formation after printing. Here, a peptide-functionalized alginate hydrogel bioink with defined mechanical, rheological, and biochemical properties is developed for direct bioprinting of microvascularized tissues. An integrin-binding peptide (RGD) and a vascular endothelial growth factor-mimetic peptide with a protease-sensitive linker are conjugated onto a biodegradable alginate to synergistically promote vascular morphogenesis and capillary-scale endothelial tube formation. Partial ionic crosslinking before printing converts the otherwise unprintable hydrogel into a viscoelastic bioink with excellent printability and cytocompatibility. We use the bioink to fabricate a compartmentalized vascularized tissue construct, wherein we observe pericyte-endothelial cell colocalization and angiogenic sprouting across a tissue interface, accompanied by deposition of fibronectin and collagen in vascular and tissue components, respectively. This study provides a tunable and translational "off-the-shelf" hydrogel bioink with defined composition for vascularized bioprinting.

Understanding angiogenesis and the role of angiogenic growth factors in the vascularisation of engineered tissues

Tissue engineering is a rapidly developing field with many potential clinical applications in tissue and organ regeneration. The development of a mature and stable vasculature within these engineered tissues (ET) remains a significant obstacle. Currently, several growth factors (GFs) have been identified to play key roles within in vivo angiogenesis, including vascular endothelial growth factor (VEGF), platelet derived growth factor (PDGF), FGF and angiopoietins. In this article we attempt to build on in vivo principles to review the single, dual and multiple GF release systems and their effects on promoting angiogenesis. We conclude that multiple GF release systems offer superior results compared to single and dual systems with more stable, mature and larger vessels produced. However, with more complex release systems this raises other problems such as increased cost and significant GF-GF interactions. Upstream regulators and pericyte-coated scaffolds could provide viable alternative to circumnavigate these issues.

A sequential 3D bioprinting and orthogonal bioconjugation approach for precision tissue engineering

Recent advances in 3D bioprinting have transformed the tissue engineering landscape by enabling the controlled placement of cells, biomaterials, and bioactive agents for the biofabrication of living tissues and organs. However, the application of 3D bioprinting is limited by the availability of cytocompatible and printable biomaterials that recapitulate properties of native tissues. Here, we developed an integrated 3D projection bioprinting and orthogonal photoconjugation platform for precision tissue engineering of tailored microenvironments. By using a photoreactive thiol-ene gelatin bioink, soft hydrogels can be bioprinted into complex geometries and photopatterned with bioactive moieties in a rapid and scalable manner via digital light projection (DLP) technology. This enables localized modulation of biophysical properties such as stiffness and microarchitecture as well as precise control over spatial distribution and concentration of immobilized functional groups. As such, well-defined properties can be directly incorporated using a single platform to produce desired tissue-specific functions within bioprinted constructs. We demonstrated high viability of encapsulated endothelial cells and human cardiomyocytes using our dual process and fabricated tissue constructs functionalized with VEGF peptide mimics to induce guided endothelial cell growth for programmable vascularization. This work represents a pivotal step in engineering multifunctional constructs with unprecedented control, precision, and versatility for the rational design of biomimetic tissues.

Smart ECM-Based Electrospun Biomaterials for Skeletal Muscle Regeneration

The development of smart and intelligent regenerative biomaterials for skeletal muscle tissue engineering is an ongoing challenge, owing to the requirement of achieving biomimetic systems able to communicate biological signals and thus promote optimal tissue regeneration. Electrospinning is a well-known technique to produce fibers that mimic the three dimensional microstructural arrangements, down to nanoscale and the properties of the extracellular matrix fibers. Natural and synthetic polymers are used in the electrospinning process; moreover, a blend of them provides composite materials that have demonstrated the potential advantage of supporting cell function and adhesion. Recently, the decellularized extracellular matrix (dECM), which is the noncellular component of tissue that retains relevant biological cues for cells, has been evaluated as a starting biomaterial to realize composite electrospun constructs. The properties of the electrospun systems can be further improved with innovative procedures of functionalization with biomolecules. Among the various approaches, great attention is devoted to the "click" concept in constructing a bioactive system, due to the modularity, orthogonality, and simplicity features of the "click" reactions. In this paper, we first provide an overview of current approaches that can be used to obtain biofunctional composite electrospun biomaterials. Finally, we propose a design of composite electrospun biomaterials suitable for skeletal muscle tissue regeneration.

Poly(N-isopropylacrylamide)-based dual-crosslinking biohybrid injectable hydrogels for vascularization

Injectable hydrogels provide a powerful and non-invasive approach for numerous applications in cell transplantation, growth factor delivery, tissue regeneration and so forth. The properties of injectable hydrogels should be well-tuned for specific applications, where their overall design should ensure biocompatibility, non-toxicity, robust mechanical properties, and most importantly the ability to promote vascularization and integration with the host tissue/organ. Among these criteria, vascularization remains a key design element in the development of functional therapeutic hydrogels for successful translation into clinical settings. To that end, there is still a critical need for the development of the next generation of injectable hydrogels with precisely tuned biophysical and biochemical properties which could simultaneously promote tissue vascularization. In this work, we developed a temperature responsive, dual-crosslinking, biohybrid hydrogels, modified with a vasculogenic peptide for applications in regenerative medicine, specifically tissue vascularization. The synthesized hydrogels consisted of poly(N-isopropylacrylamide)-based copolymer, functionalized gelation and angiogenic VEGF-mimetic QK peptide with enhanced shear-thinning and injectability properties. QK peptide is a VEGF-mimetic vasculogenic peptide which binds to VEGF receptors and activates intercellular pathway for vascularization. Apart from the presence of QK peptide, the mechanical properties of the hydrogels were precisely tuned by altering the polymer concentration, enabling successful assembly and endothelial cell network formation. Extended in vitro studies demonstrated successful encapsulation and homogeneous distribution of endothelial cells within the three-dimensional (3D) environment of the hydrogel matrix with significantly enhanced vascularization in presence of the QK peptide as early as 3 days of culture. A small, preliminary in vivo study in mice showed a trend of increased blood vessel formation in hydrogels that incorporated the QK peptide. Overall, our study presents the design and characterization of injectable, dual-crosslinking and vasculogenic hydrogels with controlled properties which could be utilized for numerous applications in regenerative medicine, minimally invasive cell and drug delivery as well as fundamental studies on tissue vascularization and angiogenesis. STATEMENT OF SIGNIFICANCE: In this work, we synthesized a new class of temperature responsive, dual-crosslinking, biohybrid injectable hydrogels with enhanced vascularization properties for broad applications in regenerative medicine and minimally invasive cell/drug delivery. The developed hydrogels properly accommodated 3D culture, assembly and network formation of endothelial cells, as evidenced by in vitro and in vivo studies.

Proteins and Peptides as Important Modifiers of the Polymer Scaffolds for Tissue Engineering Applications-A Review

Polymer scaffolds constitute a very interesting strategy for tissue engineering. Even though they are generally non-toxic, in some cases, they may not provide suitable support for cell adhesion, proliferation, and differentiation, which decelerates tissue regeneration. To improve biological properties, scaffolds are frequently enriched with bioactive molecules, inter alia extracellular matrix proteins, adhesive peptides, growth factors, hormones, and cytokines. Although there are many papers describing synthesis and properties of polymer scaffolds enriched with proteins or peptides, few reviews comprehensively summarize these bioactive molecules. Thus, this review presents the current knowledge about the most important proteins and peptides used for modification of polymer scaffolds for tissue engineering. This paper also describes the influence of addition of proteins and peptides on physicochemical, mechanical, and biological properties of polymer scaffolds. Moreover, this article sums up the major applications of some biodegradable natural and synthetic polymer scaffolds modified with proteins and peptides, which have been developed within the past five years.

Multifunctional hybrid nanoconstructs facilitate intracellular localization of doxorubicin and genistein to enhance apoptotic and anti-angiogenic efficacy in breast adenocarcinoma

The progressive development of tumors leading to angiogenesis marks the advancement of cancer which requires specific targeted treatment preferably with combination chemotherapy.

Biomimicking Dual-Responsive Extracellular Matrix Restoring Extracellular Balance through the Na/K-ATPase Pathway

Biomedical implant mimicking the physiological extracellular matrix (ECM) is a new strategy to modulate the cell microenvironment to improve implant integrity and longevity. However, the biomimicking ECM suffers from low sensitivity to pathological change and low efficiency to restore the physiological state in vivo. To overcome these problems, reactive oxygen species (ROS) and K⁺ dual-responsive micro-/nanofibers that encapsulate ascorbic acid-2-glucoside (AA-2G) are fabricated on an elastomer substrate with electrospinning to mimic the ECM. The strategy is based on the fact that ROS and K⁺ dual responsiveness enhance the sensitivity of the ECM to pathological changes and delivery of AA-2G from the ECM to cell membrane promotes reactivating Na/K-ATPase and shifting cellular diseased conditions to the normal state. We demonstrate that the ROS and K⁺-responsive tripolymer of poly(ethylene glycol)diacrylate, 1,2-ethanedithiol, and 4-nitrobenzo-18-crown-6-ether (PEGDA-EDT-BCAm) are synthesized successfully; the ECM composed of acylated poly(caprolactone)/PEGDA-EDT-BCAm/AA-2G micro-/nanofibers is prepared through reactive electrospinning; the ECM is sensitive to ROS and K⁺ concentration in the microenvironment to release AA-2G, which targets the membrane to remove the excessive ROS and reactivate Na/K-ATPase; as a result, the ECM reduces oxidative stress and restores the extracellular physiological state both in vitro and in vivo. This work provides basic principles to design an implant that can adjust the extracellular microenvironment while avoiding pathogenicity to improve implant integrity and longevity in vivo.

Tethering QK peptide to enhance angiogenesis in elastin-like recombinamer (ELR) hydrogels

The development of new capillary networks in engineered constructs is essential for their survival and their integration with the host tissue. It has recently been demonstrated that ELR-based hydrogels encoding different bioactivities are able to modulate their interaction with the host after injection or implantation, as indicated by an increase in cell adhesion and the ability to trigger vascularization processes. Accordingly, the aim of this study was to increase their angiogenic ability both in vitro and in vivo using a small VEGF mimetic peptide named QK, which was tethered chemically to ELR-based hydrogels containing cell-adhesion sequences in their backbone, such as REDV and RGD, as well as a proteolytic site (VGVAPG). In vitro studies were performed using a co-culture of endothelial and fibroblast cells encapsulated into the ELR-based hydrogels in order to determine cell proliferation after 21 days of culture, as well as the number of cell-cell interactions. It was found that although the presence of this peptide does not influence the morphological and rheological properties of these hydrogels, it has an effect on cell behaviour, inducing an increase in cell proliferation and the formation of endothelial cell clusters. In vivo studies demonstrate that the QK peptide enhances the formation of prominent functional capillaries at three weeks post-injection, as confirmed by H&E staining and CD31 immunohistochemistry. The newly formed functional microvasculature ensures perfusion and connection with surrounding tissues. These results show that ELR-QK hydrogels increase capillary network formation and are therefore attractive candidates for application in tissue regeneration, for example for the treatment of cardiovascular diseases such as myocardial infarction or ischemia.

Constructing heparin-modified pancreatic decellularized scaffold to improve its re-endothelialization

Pancreas transplantation is considered as a promising therapeutic option with the potential to cure diabetes. However, efficacy of current clinical transplantation is limited by the donor organ. With regard to creating a functional pancreas-tissue equivalent for transplantation, vascularization remains a large obstacle. To enhance the angiogenic properties of pancreatic decellularized scaffold, surface modification of the vasculature was used to promote endothelialization efficiency. In this study, an endothelialized pancreatic decellularized scaffold was obtained through heparin modification under mild conditions. The immobilization of heparin was performed through 1-ethyl-3-(3-dimethylaminopropyl)-carbodiimide and N-Hydroxysuccinimide. The morphology, ultra-structure and porosity of the heparinized scaffold were characterized by toluidine blue staining, scanning electron microscope and infrared spectrum. The adhesion, proliferation and angiogenesis of human umbilical vein endothelial cells on heparin-pancreatic decellularized scaffold were also researched in vitro. In vivo transplantation was also performed to observe the location of human umbilical vein endothelial cells and the formation of new blood vessel, which exhibited significant differences with pancreatic decellularized scaffold group (p<0.05). These findings indicated that the endothelialized heparin-pancreatic decellularized scaffold may be used to solve the problem of blood supply and to support the function of insulin-secreting cells better after in vivo transplantation, and therefore, would be a potential candidate for pancreatic tissue engineering.

clickECM: Development of a cell-derived extracellular matrix with azide functionalities

In vitro cultured cells produce a complex extracellular matrix (ECM) that remains intact after decellularization. The biological complexity derived from the variety of distinct ECM molecules makes these matrices ideal candidates for biomaterials. Biomaterials with the ability to guide cell function are a topic of high interest in biomaterial development. However, these matrices lack specific addressable functional groups, which are often required for their use as a biomaterial. Due to the biological complexity of the cell-derived ECM, it is a challenge to incorporate such functional groups without affecting the integrity of the biomolecules within the ECM. The azide-alkyne cycloaddition (click reaction, Huisgen-reaction) is an efficient and specific ligation reaction that is known to be biocompatible when strained alkynes are used to avoid the use of copper (I) as a catalyst. In our work, the ubiquitous modification of a fibroblast cell-derived ECM with azides was achieved through metabolic oligosaccharide engineering by adding the azide-modified monosaccharide Ac₄GalNAz (1,3,4,6-tetra-O-acetyl-N-azidoacetylgalactosamine) to the cell culture medium. The resulting azide-modified network remained intact after removing the cells by lysis and the molecular structure of the ECM proteins was unimpaired after a gentle homogenization process. The biological composition was characterized in order to show that the functionalization does not impair the complexity and integrity of the ECM. The azides within this "clickECM" could be accessed by small molecules (such as an alkyne-modified fluorophore) or by surface-bound cyclooctynes to achieve a covalent coating with clickECM.

STATEMENT OF SIGNIFICANCE

The clickECM was produced by the incorporation of azide-functionalized sugar analogues into the extracellular glycans of fibroblast cell cultures by metabolic oligosaccharide engineering. By introducing these azide groups into the glycan structures, we enabled this cell-derived ECM for bioorthogonal click reactions. Click chemistry provides extremely specific reactions with high efficiency, high selectivity, and high reaction yields. We could show that the azide functionalities within the clickECM are chemically accessible. Based on our here described clickECM technique it will be possible to create and investigate new clickECM materials with tunable bioactive properties and additional functionalities, which offers a promising approach for basic and applied research in the field of biomaterial science, biomedical applications, and tissue engineering.

Cell-Free Hydrogel System Based on a Tissue-Specific Extracellular Matrix for In Situ Adipose Tissue Regeneration

Well-designed scaffolds provide appropriate niches that can effectively recruit host cells and induce differentiation of recruited cells into the desired cell types, facilitating in situ tissue regeneration. Here we report a tissue-specific extracellular matrix (ECM) hydrogel composed of adipose-derived soluble ECM (sECM) and methylcellulose (MC) as a cell-free scaffold system for adipose tissue regeneration. The sECM-MC hydrogels showed a thermosensitive sol-gel phase transition and rapidly formed a soft hydrogel with a stiffness of 3.8 kPa at body temperature. An in vivo study showed that the sECM-MC hydrogel facilitated the infiltration of host cell populations, particularly adipose-derived stem cells (ASCs) and adipose tissue macrophages (ATMs) that directly contribute to the adipose tissue regeneration. Moreover, the hydrogel significantly enhanced host-derived adipogenesis and angiogenesis without exogenous cells or bioactive molecules. Our results indicate that the sECM-MC hydrogels provide mechanical and biochemical cues for host-derived adipose regeneration. Overall, the sECM-MC hydrogels are a highly promising cell-free therapeutic approach for in situ adipose tissue regeneration.

Delivery of growth factor-based therapeutics in vascular diseases: Challenges and strategies

Either cardiovascular or peripheral vascular diseases have become the major cause of morbidity and mortality worldwide. Recently, growth factors therapeutics, whatever administrated in form of exogenous growth factors or their relevant genes have been discovered to be an effective strategy for the prevention and therapy of vascular diseases, because of their promoting angiogenesis. Besides, as an alternative, stem cell-based therapy has been also developed in view of their paracrine-mediated effect or ability of differentiation toward angiogenesis-related cells under assistance of growth factors. Despite of being specific and potent, no matter growth factors or stem cells-based therapy, their full clinical transformation is limited from bench to bedside. In this review, the potential choices of therapeutic modes based on types of different growth factors or stem cells were firstly summarized for vascular diseases. The confronted various challenges such as lack of non-invasive delivery method, the physiochemical challenge, the short half-life time, and poor cell survival, were carefully analyzed for these therapeutic modes. Various strategies to overcome these limitations are put forward from the perspective of drug delivery. The expertised design of a suitable delivery form will undoubtedly provide valuable insight into their clinical application in the regenerative medicine.

Copper-Catalyzed Click Reaction on/in Live Cells

We demonstrated that copper-catalyzed azide-alkyne cycloaddition (CuAAC) reaction could be performed inside live mammalian cells without using a chelating azide. Under optimized conditions, the reaction was performed in human ovary cancer cell line OVCAR5 in which newly synthesized proteins were metabolically modified with homopropargylglycine (HPG). This model system allowed us to estimate the efficiency of the reaction on the cell membranes and in the cytosol using mass spectrometry. We found that the reaction was greatly promoted by a tris(triazolylmethyl)amine CuI ligand tethering a cell-penetrating peptide. Uptake of the ligand, copper, and a biotin-tagged azide in the cells was determined to be 69 ± 2, 163 ± 3 and 1.3 ± 0.1 µM, respectively. After 10 minutes of reaction, the product yields on the membrane and cytosolic proteins were higher than 18% and 0.8%, respectively, while 75% cells remained viable. By reducing the biothiols in the system by scraping or treatment with N-ethylmalemide, the reaction yield on the cytosolic proteins was greatly improved to ~9% and ~14%, respectively, while the yield on the membrane proteins remained unchanged. The results indicate that out of many possibilities, deactivation of the current copper catalysts by biothiols is the major reason for the low yield of CuAAC reaction in the cytosol. Overall, we have improved the efficiency for CuAAC reaction on live cells by 3-fold. Despite the low yielding inside live cells, the products that strongly bind to the intracellular targets can be detected by mass spectrometry. Hence, the in situ CuAAC reaction can be potentially used for screening of cell-specific enzyme inhibitors or biomarkers containing 1,4-substituted 1,2,3-triazoles.

3D Bioprinting for Vascularized Tissue Fabrication

3D bioprinting holds remarkable promise for rapid fabrication of 3D tissue engineering constructs. Given its scalability, reproducibility, and precise multi-dimensional control that traditional fabrication methods do not provide, 3D bioprinting provides a powerful means to address one of the major challenges in tissue engineering: vascularization. Moderate success of current tissue engineering strategies have been attributed to the current inability to fabricate thick tissue engineering constructs that contain endogenous, engineered vasculature or nutrient channels that can integrate with the host tissue. Successful fabrication of a vascularized tissue construct requires synergy between high throughput, high-resolution bioprinting of larger perfusable channels and instructive bioink that promotes angiogenic sprouting and neovascularization. This review aims to cover the recent progress in the field of 3D bioprinting of vascularized tissues. It will cover the methods of bioprinting vascularized constructs, bioink for vascularization, and perspectives on recent innovations in 3D printing and biomaterials for the next generation of 3D bioprinting for vascularized tissue fabrication.

Multi-biofunctionalization of a titanium surface with a mixture of peptides to achieve excellent antimicrobial activity and biocompatibility

A model for multi-biofunctionalizing a titanium surface with a mixture of peptides at desired ratios to achieve excellent antimicrobial activity and biocompatibility.