Evaluation of hydrophobic polyvinyl-alcohol formaldehyde sponges as absorbents for oil spill

Diesel removal in non-aqueous phase by fibres from Calotropis procera: kinetic, isothermal and sorption potential evaluation

Calotropis procera fibres have been proposed for free-phase diesel removal in case of spillage into groundwater. For this, characterizations were carried out using Fourier transform infrared spectroscopy (FTIR), field emission scanning electron microscopy (FEG-SEM), wettability and contact angle measurements. Sorption oil capacity, kinetic, isothermal and recycling behaviour were evaluated. For initial optimization of the oil sorption capacity, an experimental design (DOE) was applied, with the optimized condition being 60 g L-1 of diesel in water and 0.01 g of fibre. Then, the results clearly indicated that the fibres have a hydrophobic and oleophilic character, quickly reaching more than 71.43 g g-1 of diesel sorption, according to the adjustment (R² > 0.99) of the pseudo-second order and Langmuir models, governed by absorption mechanisms. It should also be noted that at the end of 8 reuse cycles, the fibre presented a total accumulated sorption capacity of about 252.6 g g-1 of diesel. Furthermore, a laboratory-scale experiment was carried out to remove diesel from groundwater in gas station areas, the fibre removed 98.55% to 99.97% of removal efficiencies were achieved of the free phase over time. Therefore, the material demonstrates excellent characteristics for removing diesel spills in groundwater due to its fast, high and stable removal capacity.

Highly compressible and hydrophobic nanofibrillated cellulose aerogels for cyclic oil/water separation

Nanofibrillated cellulose (NFC)-based aerogels are ideal oil-sorbent materials, but the poor structural stability and hydrophilicity restrain their practical applications in the fields of oil/water separation. In the present work, we report a facile strategy for constructing a hydrophobic nanofibrillated cellulose aerogel for cyclic oil/water separation. Briefly, an aerogel matrix of C-g-PEI with multiple cross-linked network structures was constructed via the combined use of oxidized-NFC (ONC), polyethyleneimine (PEI), and ethylene glycol diglycidyl ether (EGDE), followed by rapid in situ deposition of poly(methyl trichlorosilane) (PMTS) through a low-temperature gas-solid reaction. The resulting ONC-based aerogel (C-g-PEI-PMTS) exhibits the advantages of ultralight (53.80 mg/cm³), high porosity (95.73 %), hydrophobicity (contact angle of 130.0°) and remarkable elasticity (95.86 %). Meanwhile, the composite aerogel of C-g-PEI-PMTS is extremely suitable for oil sorption-desorption by a simple mechanical squeezing method. After 10 cycles of sorption-desorption, the sorption capacity of the aerogel towards various oils reached almost the same level as in the first cycle. The filtration separation efficiency for the trichloromethane-water mixtures remained at 99 % after 50 cycles, demonstrating encouraging reusability. In summary, an efficient strategy to prepare NFC-based aerogel with highly compressible and hydrophobic properties is developed, which expands the applications of NFC in the fields of oil/water separation.

Preparation of high elastic bacterial cellulose aerogel through thermochemical vapor deposition catalyzed by solid acid for oil-water separation

Oil pollution has caused more and more serious damages to the environment, especially to water. Oil and water separation technologies based on high-performance absorbing materials have attracted extensive attentions. Herein, elasticity-enhanced bacterial cellulose (BC) aerogel is synthesized for oil/water separation through thermochemical vapor deposition (CVD) catalyzed by 1, 2, 3, 4-butanetetracarboxylic acid (BTCA). BTCA has two functions, namely, esterification with BC and catalyzing CVD. The prepared aerogel could be recovered soon after being compressed and the elastic recovery was >90 % at set maximum deformation of 80 %. And, it also exhibits vigorous fatigue resistance with an elastic deformation of >80 % after 50 cycles. The high elastic and hydrophobic aerogel is very suitable for absorbing and desorbing oils by simple mechanical squeezing. The adsorption capacity for n-hexane and dichloroethane maintain 87 % and 81 % after 50 cycles, respectively, which implies robust reusability. Importantly, the CVD could also be catalyzed by other solid acids such as citric acid and vitamin C. This design and fabrication method offers a novel avenue for the preparation of hydrophobic bacterial cellulose aerogel with high elasticity.

Advanced cellulose nanocrystals (CNC) and cellulose nanofibrils (CNF) aerogels: Bottom-up assembly perspective for production of adsorbents

The most common and abundant polymer in nature is the linear polysaccharide cellulose, but processing it requires a new approach since cellulose degrades before melting and does not dissolve in ordinary organic solvents. Cellulose aerogels are exceptionally porous (>90 %), have a high specific surface area, and have low bulk density (0.0085 mg/cm³), making them suitable for a variety of sophisticated applications including but not limited to adsorbents. The production of materials with different qualities from the nanocellulose based aerogels is possible thanks to the ease with which other chemicals may be included into the structure of nanocellulose based aerogels; despite processing challenges, cellulose can nevertheless be formed into useful, value-added products using a variety of traditional and cutting-edge techniques. To improve the adsorption of these aerogels, rheology, 3-D printing, surface modification, employment of metal organic frameworks, freezing temperature, and freeze casting techniques were all investigated and included. In addition to exploring venues for creation of aerogels, their integration with CNC liquid crystal formation were also explored and examined to pursue "smart adsorbent aerogels". The objective of this endeavour is to provide a concise and in-depth evaluation of recent findings about the conception and understanding of nanocellulose aerogel employing a variety of technologies and examination of intricacies involved in enhancing adsorption properties of these aerogels.

Electrospinning fabrication of magnetic nanoparticles-embedded polycaprolactone (PCL) sorbent with enhanced sorption capacity and recovery speed for spilled oil removal

The use of oil-soaked sorbents in the recovery and cleaning of oil spills presents challenges due to disposal. Recently, magnetic nanoparticle (MNP) based collection has been gaining interest as a new technique to lower the amount of labor required to treat oil spills. In this study, we devised a new method for the preparation of a magnetic nanoparticle (MNP) embedded polycaprolactone (PCL) sorbent with oleophilic and environmentally friendly features, capable of bring easily collected under a magnetic field. Compared with conventional polypropylene sorbents, the MNP embedded PCL sorbent (MNP/PCL) displayed excellent Arabian light (AL) crude oil sorption capacity (45.7 g g^-1) and decreased the absorption time of the oil-soaked sorbent due to its electrospun structure and efficient distribution of hydrophobic MNPs. Furthermore, the MNP/PCL based sorbent became fully pyrolyzed under certain temperatures and conditions. The MNP embedded PCL-based sorbent demonstrated broad applicability and utility in large scale oil spill projects.

Recyclable & highly porous organo-aerogel adsorbents from biowaste for organic contaminants' removal

Selective aerogel has become an attractive adsorbent for removing oil and organic contaminants due to its low density and excellent adsorption capacity. However, aerogels usually use non-sustainable or expensive nanomaterials and require complicated fabrication processes. Herein, using low-cost lignin reclaimed from the biorefinery waste stream as the starting material, we fabricated a highly porous, mechanically strong, and stable aerogel via a simple and one-step method under mild conditions. This aerogel exhibits a controllable micropore structure and achieves quick and efficient adsorption for oil (435% g/g), as well as toxic solvents such as THF (365% g/g). The selective and stable adsorbent can be reused multiple times and the oil adsorption capacity after 5 cycles remained at 89%. This highly efficient, mechanically strong, stable, and regenerable aerogel is a potential candidate for multiple applications such as cleaning up organic contaminants, oil remediation, and oil/water separation. Meanwhile, it also employs a "waste-treat-waste" concept by adding extra value to the biorefinery process for high-efficiency circular bioeconomy.

Recent advancements in hydrocarbon bioremediation and future challenges: a review

Petrochemicals are important hydrocarbons, which are one of the major concerns when accidently escaped into the environment. On one hand, these cause soil and fresh water pollution on land due to their seepage and leakage from automobile and petrochemical industries. On the other hand, oil spills occur during the transport of crude oil or refined petroleum products in the oceans around the world. These hydrocarbon and petrochemical spills have not only posed a hazard to the environment and marine life, but also linked to numerous ailments like cancers and neural disorders. Therefore, it is very important to remove or degrade these pollutants before their hazardous effects deteriorate the environment. There are varieties of mechanical and chemical methods for removing hydrocarbons from polluted areas, but they are all ineffective and expensive. Bioremediation techniques provide an economical and eco-friendly mechanism for removing petrochemical and hydrocarbon residues from the affected sites. Bioremediation refers to the complete mineralization or transformation of complex organic pollutants into the simplest compounds by biological agents such as bacteria, fungi, etc. Many indigenous microbes present in nature are capable of detoxification of various hydrocarbons and their contaminants. This review presents an updated overview of recent advancements in various technologies used in the degradation and bioremediation of petroleum hydrocarbons, providing useful insights to manage such problems in an eco-friendly manner.

Fabrication of environmentally-friendly composited sponges for efficient removal of fluoroquinolones antibiotics from water

In this study, two environmentally-friendly macroscopically formal (PVF) composited sponges (PL and PLS) functionalized with lignin and lignosulfonate, respectively, were fabricated by a one-step mechanical foaming method. PLS, obtained with the fed mass ratio of 0.3:1 lignosulfonate to PVF in the preparation process, possessed a large specific surface area of approximately 22.396 m²/g, a three-dimensional skeleton structure with a skeletal density of 3.236 g/cm³, and 0.338 mmol/g of acidic oxygen-containing groups. Thus, it showed a high adsorption capacity of 0.16-0.24 mmol/g in removing seven antibiotics, of the popular fluoroquinolones (FQs) family from water. The contributions of hydrogen bonding, electrostatic attraction (EA) and π-π electron donor-acceptor interaction to the adsorption of FQs onto the PL and PLS sponges were analyzed systematically by investigating the pH dependence of the adsorption capacity, and the changes in adsorption of two sub structural analogs of FQs as molecular probes, and by performing theoretical calculations. The EA between the acidic oxygen-containing groups on the sponges and the amino groups of FQs played a dominant role in adsorption in near neutral conditions, leading to a superior adsorption performance for PLS. Overall, the composited sponges have the advantages of simple production, environmental-friendliness, convenient recycle, and low cost, which renders them potentially viable in treating real wastewater containing FQs.

Facile Preparation of Robust Superhydrophobic/Superoleophilic TiO2-Decorated Polyvinyl Alcohol Sponge for Efficient Oil/Water Separation

Oily wastewater and oil spills pose a threat to the environment and human health, and porous sponge materials are highly desired for oil/water separation. Herein, we design a new superhydrophobic/superoleophilic TiO₂-decorated polyvinyl alcohol (PVA) sponge material for efficient oil/water separation. The TiO₂-PVA sponge is obtained by firmly anchoring TiO₂ nanoparticles onto the skeleton surface of pristine PVA sponge via the cross-linking reactions between TiO₂ nanoparticles and H₃BO₃ and KH550, followed by the chemical modification of 1H,1H,2H,2H-perfluorodecyltrichlorosilane. The as-prepared TiO₂-PVA sponge shows a high water contact angle of 157° (a sliding angle of 5.5°) and an oil contact angle of ∼0°, showing excellent superhydrophobicity and superoleophilicity. The TiO₂-PVA sponge exhibits excellent chemical stability, thermal stability, and mechanical durability in terms of immersing it in the corrosive solutions and solvents, boiling it in water, and the sandpaper abrasion test. Moreover, the as-prepared TiO₂-PVA sponge possesses excellent absorption capacity of oils or organic solvents ranging from 4.3 to 13.6 times its own weight. More importantly, the as-prepared TiO₂-PVA sponge can separate carbon tetrachloride from the oil-water mixture with a separation efficiency of 97.8% with the aid of gravity and maintains a separation efficiency of 96.5% even after 15 cyclic oil/water separation processes. Therefore, the rationally designed superhydrophobic/superoleophilic TiO₂-PVA sponge shows great potential in practical applications of dealing with oily wastewater and oil spills.

Hydrophobic and self-recoverable cellulose nanofibrils/N-alkylated chitosan/poly(vinyl alcohol) sponge for selective and versatile oil/water separation

A highly hydrophobic and self-recoverable sponge was prepared with cellulose nanofibrils (CNFs), N-alkylated chitosan (NCS), and poly (vinyl alcohol) (PVA), which was then endowed with hydrophobic properties via simple thermal chemical vapor deposition (CVD). The three-dimensional (3D) interconnected microstructure of the prepared CNF/NCS/PVA sponge was found to have 96% porosity, ultra-low density (16.61-50.91 mg/cm³) and high hydrophobicity (water contact angle of 147°), which can absorb various organic solvents with an absorption capacity of 19.05-51.08 times of its original weight. Besides, the sponge could bear 80% strain and be cyclically compressed 50 times under the strain of 50%. The sponge can effectively separate oil/water mixtures and water-in-oil emulsions with high separation efficiency and fluxes. Moreover, the sponge could keep its good stability in various acidic, saline and mechanical abrasion conditions. The green preparation and good separation efficiency suggest a potential application of recyclable and versatile CNF/NCS/PVA sponges in oil/water separation.

Fabrication of chitin nanofiber-PDMS composite aerogels from Pickering emulsion templates with potential application in hydrophobic organic contaminant removal

Natural polymers have aroused increasing attention in water treatment but their application in removing hydrophobic organic contaminants (HOCs) was limited due to their hydrophilicity. Herein, hydrophobic aerogels were successfully fabricated from Pickering emulsions stabilized by chitin nanofibers (ChNF) with polydimethylsiloxane (PDMS) as dispersed phase and glutaraldehyde as a crosslinking agent, and their performance in HOCs removal were evaluated. The Pickering emulsions with PDMS ratios of 2.5-20% v/v showed high stability, demonstrating great potential as aerogel templates. The solidified PDMS droplets were evenly distributed within the matrix, contributing to homogeneous and permanent hydrophobicity. The composite aerogels with water contact angles of over 130° could selectively remove non-aqueous phase HOCs from water. The CCl₄ adsorption capacity was 521-2820 wt%, depending on PDMS contents. Meanwhile, the mechanical resilience of the composite aerogels was significantly improved, facilitating the adsorbent regeneration by simple mechanical squeezing. The adsorption capacity remained above 85% for 24 cycles. Moreover, the aerogels could also remove dissolved HOCs from water with a maximum adsorption capacity of 1.34 mg/g for 10 mg/L TCE. This work reveals the potential of Pickering emulsions in the fabrication of composite hydrophobic materials from natural biopolymers with promising application in HOCs related water treatment.

A comprehensive review on the applications of functionalized chitosan in petroleum industry

The biomaterials have gained the attention for utilization as sustainable alternatives for petroleum-derived products due to the rapid depletion of petroleum resources and environmental issues. Chitosan is an economical, renewable and abundant polysaccharide having unique molecular characteristics. Chitosan is derived by deacetylation of chitin, a natural polysaccharide existing in insects' exoskeleton, outer shells of crustaceans, and some fungi cell walls. Chitosan is widely used in numerous domains like agriculture, food, water treatment, medicine, cosmetics, fisheries, packaging, and chemical industry. This review aims to account for all the efforts made towards chitosan and its derivatives for utilization in the petroleum industry and related processes including exploration, extraction, refining, transporting oil spillages, and wastewater treatment. This review includes a compilation of various chemical modifications of chitosan to enhance the petroleum field's performance and applicability.

Caffeic acid polymer rapidly modified sponge with excellent anti-oil-adhesion property and efficient separation of oil-in-water emulsions

The efficient treatment of high stability emulsion with small diameter and the prevention of oil contamination of materials are serious issues in the process of emulsion separation. In order to address those issues, we reported a fast and versatile hydrophilic surface coating technology that uses oxidants and diamines to synergistically promote the polymerization of caffeic acid (CA). It was found that amino groups can not only accelerate the polymerization of CA, but also promote the deposition of polymers on the sponge surface. Using silica nanoparticles to improve the roughness, superhydrophilic melamine sponge could be prepared, which exhibited excellent superhydrophlic-underwater superolephobic and anti-oil-adhesion properties. DFT simulation was employed to explore the potential mechanism of the anti-oil adhesion ability. In addition, combined with the mechanical compression strategy, the sponge exhibited a high efficiency of 99.10% with a permeation flux of 19080 ± 700 Lm^-2 h^-1 in emulsion separation just under the action of gravity. Moreover, based on the interaction between the surfactant and the surface of the material, the separation mechanism was discussed. Overall, this work provided an advanced method for the preparation of superhydrophilic sponge with anti-oil-fouling performance, which showed great potential in dealing with practically challenging emulsified wastewater.

Three-dimensional superhydrophilic polyvinyl alcohol–formaldehyde composite sponges with suitable pore sizes for high efficiency emulsion separation

PVA/PVF and PVA–COOH/PVF composite sponges with excellent emulsion separation performance.

A multifunctional sponge incorporated with TiO2 and graphene oxide as a reusable absorbent for oil/water separation and dye absorption

Reusable TiO₂–GO–SA sponges can be used for the oil/water separation and absorption of oils and dyes.

Wetting behaviors of fluoroterpolymer fiber films

Various aspects of electrospun fibers prepared from terpolymer of tetrafluoroethylene (TFE), hexafluoropropylene (HFP), and vinylidene fluoride (VDF) (THV)/acetone solutions at two applied voltages, THV/acetone solutions having Texas montmorillonite with two ratios, and THV/ethyl acetate solutions using two needle sizes are described. Fibers from THV/acetone and THV/ethyl acetate solutions showed shallow indentations and pores, respectively. The clay, functioning as electrospinning agent, did not influence the fiber morphology, but yielded narrower fiber diameter distribution and the thinnest fibers. Heterogeneous fiber diameter distribution and increase in the fiber diameters were observed by lowering the voltage for fibers of THV/acetone solutions. Fibers from THV/ethyl acetate solutions had the largest diameter and the broadest diameter distribution. Electrospun THV fibers having both hydrophobic characteristics with nearly 140° water contact angles and oleophilic properties with oil contact angles less than 45° might have applications in areas such as water/oil separation.

A polyamide 6-organic montmorillonite composite sponge by large-scale solution foaming as a reusable and efficient oil and organic pollutant sorbent

Effective removal of oil spills or organic pollutant oils from water is of global significance for environmental protection. However, traditional techniques usually suffer from the limits of low efficiency and high cost. In this study, sponge-like polyamide 6/organic montmorillonite (PA 6/OMMT) composite absorbents were fabricated through a large-scale solution foaming method. Aqueous sodium carbonate solution was injected into a PA/formic acid solution with well-dispersed nanoclay to generate CO₂ and meanwhile initiate the phase separation of PA molecules from the solvent. Both mesopores and macropores existed in the prepared sponges. The effect of OMMT content on the microstructures and adsorption properties was investigated. Upon increasing the OMMT fraction in composite sponges, the pore size decreased and the fraction of mesopore increased. Better adsorption properties were thus obtained. When OMMT nanoplatelets accounted for 10%, the corresponding sponge had an uptake capacity of 12.5-22.1 g g^-1 for diverse oils or organic solvents. Moreover, the composite sponges absorbed oils and organic solvents rapidly and reached saturation in 20 s. When it was coated with methyltrichlorosilane (MTS), the static water contact angle on the surface of the sponge increased from 88° to 115°. The selective absorption of oil from an oil/water mixture was improved. A greatly promising approach is provided to make commercial polyamide into highly porous functional materials for the cleanup of large-scale oil spills.

Evaluation of Thermally Treated Calotropis Procera Fiber for the Removal of Crude Oil on the Water Surface

Biosorbents have been highlighted as an alternative method for the removal of contaminants from spills or leaks of oil and its derivatives, since they are biodegradable, are highly available, low-cost, and have a good sorption capacity. This research investigated the sorption capacity of Calotropis procera fiber in natura (CP) and thermally treated (150 °C and 200 °C) for crude oil removal and recovery. The oil sorption tests were carried out in a dry and water (layer) static systems. The assays revealed that CP fiber has excellent hydrophobic-oil properties and good crude oil sorption capacity, about 75 times its own weight (76.32 g/g). The results of the treated fibers, CPT150 and CPT200, showed oil sorption capacities (in 24 h) higher than CP, between 94.31–103.37 g/g and 124.60–180.95 g/g, respectively. The results from sample CPT200 showed that it can be an excellent biosorbent for the removal of crude oil and other derivatives due to its high hydrophobicity, great reuse/resorption capacity, and ability to retain oil within the fiber lumens. Thus, it can be applied in the recovery, cleaning, and removal of petroleum products and its derivatives from spills and leaks in the future.

Superswelling Hybrid Sponge from Water Glass for Selective Absorption of Crude Oil and Organic Solvents

A lightweight super hydrophilic hybrid sponge is designed and demonstrated out of water glass and an organic polymer, which has a macroporous flaky nature and is superflexible with an apparent density of 0.069 g cc^-1, ∼97% porosity, and 3000% water uptake. The octadecyltrimethoxy silane-modified hybrid sponge exhibits selective absorption of oil and organic solvents in open water. An absorption capacity in the range 12-23 g g^-1 for the test liquids light crude oil, engine oil, paraffin oil, chloroform, kerosene, and hexane is revealed. Absorption capacity by a weight basis was directly proportional to the density and inversely proportional to the viscosity of test liquids. Trials under both stagnant and turbulent conditions verify selective uptake of oil from sea water. Complete regeneration of the absorbent was possible for ten cycles for the test liquids. The work provides design of an affordable water clean-up material alternative to commonly used polyurethane sponges.

Synthesis of a Superhydrophobic Polyvinyl Alcohol Sponge Using Water as the Only Solvent for Continuous Oil-Water Separation

Few cases of hydrophobic materials synthesized in water have been reported. In this work, water, as the only solvent, is used to prepare a superhydrophobic sponge via a facile and environment-friendly route. The as-prepared sponge, namely silylated polyvinyl alcohol (PVA) sponge, exhibits superhydrophobic and superoleophilic characters. It has the static water contact angle (WCA) of 152 ± 1 and the static oil contact angle (OCA) of 0°, which can lead to excellent selectivity for oil-water separation. Besides, the methyltriethoxysilane (MTES) can form a stable mixed structure with the PVA skeleton, resulting in the rare shedding of polymethylsiloxane nanoparticles and the long-term stability for oil-water separation. Furthermore, the silylated sponge shows a high separation efficiency (>99.6%), removing oil up to 6200∼14000 times of its own mass. The findings demonstrated that the silylated superhydrophobic sponge can be a promising candidate in water treatment application.

Complex Aerogels Generated from Nano-Polysaccharides and Its Derivatives for Oil-Water Separation

The complex aerogel generated from nano-polysaccharides, chitin nanocrystals (ChiNC) and TEMPO-oxidized cellulose nanofibers (TCNF), and its derivative cationic guar gum (CGG) is successfully prepared via a facile freeze-drying method with glutaraldehyde (GA) as cross-linkers. The complexation of ChiNC, TCNF, and CGG is shown to be helpful in creating a porous structure in the three-dimensional aerogel, which creates within the aerogel with large pore volume and excellent compressive properties. The ChiNC/TCNF/CGG aerogel is then modified with methyltrichlorosilane (MTCS) to obtain superhydrophobicity/superoleophilicity and used for oil–water separation. The successful modification is demonstrated through FTIR, XPS, and surface wettability studies. A water contact angle of 155° on the aerogel surface and 150° on the surface of the inside part of aerogel are obtained for the MTCS-modified ChiNC/TCNF/CGG aerogel, resulting in its effective absorption of corn oil and organic solvents (toluene, n-hexane, and trichloromethane) from both beneath and at the surface of water with excellent absorption capacity (i.e., 21.9 g/g for trichloromethane). More importantly, the modified aerogel can be used to continuously separate oil from water with the assistance of a vacuum setup and maintains a high absorption capacity after being used for 10 cycles. The as-prepared superhydrophobic/superoleophilic ChiNC/TCNF/CGG aerogel can be used as a promising absorbent material for the removal of oil from aqueous media.

Efficient treatment of brine wastewater through a flow-through technology integrating desalination and photocatalysis

Many current treatments for brine wastewaters are energy-intensive, chemical-intensive, and involve independent process in the removal of salts and contaminants. We demonstrate that through the integration of capacitive deionization and photocatalysis reactions within carbon nanotubes (CNTs) based membrane system, we are able to realize the purification and desalination of wastewaters via single-step, energy-efficient, and environmentally friendly route. We firstly designed the membrane system consisting of graphitic carbon nitride (g-C₃N₄), CNTs membrane, and poly(vinyl alcohol)-formaldehyde (PVF) foam. Then, two identical membrane systems were used as permeable electrodes and photocatalytic microreactors to construct the flow-through setup. The tests of the setup with a variety of dye solution, antibiotics solution, and actual wastewaters prove that wastewaters passing through the setup promptly turn to clean water with significantly decreased salinity. This is because the setup can use C₃N₄ modified CNTs membrane to adsorb organic contaminants and inorganic ions and decompose contaminants via photocatalysis reactions. In addition, by discharging the setup, its adsorption capacity towards salts is easily recovered. Consequently, the flow-through setup is observed to exhibit stable performance for concurrent removal of organic contaminants and inorganic salts in multiple cycles.

A review of femtosecond laser-structured superhydrophobic or underwater superoleophobic porous surfaces/materials for efficient oil/water separation

Oil/water separation (OWS) technology has become an increasingly crucial tool to protect the environment and reduce the economic losses caused by the discharge of oily wastewater and oil spills. Recently, porous materials with superwettability have been applied in effective OWS and have achieved tremendous success. Herein, we review recent advancements of OWS utilizing femtosecond (fs) laser-structured superhydrophobic or underwater superoleophobic porous materials. We will review the enabling materials processing and treatment methods, their surface wettability, the separating methods and processes, and the separation mechanisms. Inspired by lotus leaves and fish scales, superhydrophobic and underwater superoleophobic properties are artificially achieved on substrate surfaces by fs laser processing. By using fs laser-structured superwetting porous materials, various oil/water mixtures (OWMs) are successfully separated through different separation methods. Presently, the research of fs laser-based OWS is still in its infancy. We will also discuss the current challenges and future prospects in this emerging field. It is expected that the advanced features of fs laser microfabrication will lead to exciting applications for OWS.

Femtosecond Laser-Induced Underwater Superoleophobic Surfaces with Reversible pH-Responsive Wettability

Wettability-switchable surfaces have become a research hotspot because they can exhibit different superwetting states. In this paper, the copper surfaces with pH-responsive underwater-oil wettability were prepared by femtosecond laser treatment and subsequent chemical modification. The resultant surfaces showed underwater superoleophobicity in alkaline solutions but quasi-superoleophilicity in acidic solutions. The contact angles of an underwater-oil droplet on the resultant surfaces could be reversibly tuned between 157° and 12° by changing the pH of aqueous solutions. Such switchable wettability is ascribed to the modification of the alkyl and carboxylic acids groups on the laser-structured surfaces. The as-prepared surfaces have both oil-resistance and oil-collection abilities by selectively showing underwater superoleophobicity and superoleophilicity. The smart surfaces with pH-responsive oil wettability will have important applications in controlling the oil behavior in water.

Controllable synthesis of pomelo peel-based aerogel and its application in adsorption of oil/organic pollutants

Oil/water separation is a field of high significance as it might efficiently resolve the contamination of industrial oily wastewater and other oil/water pollution. In this paper, an environmentally-friendly hydrophobic aerogel with high porosity and low density was successfully synthesized with renewable pomelo peels (PPs) as precursors. Typically, a series of sponge aerogels (HPSA-0, HPSA-1 and HPSA-2) were facilely prepared via high-speed dispersion, freeze-drying and silanization with methyltrimethoxysilane. Indeed, the physical properties of aerogel such as density and pore diameter could be tailored by different additives (filter paper fibre and polyvinyl alcohol). Hence, their physico-chemical properties including internal morphology and chemical structure were characterized in detail by Fourier transform infrared, Brunauer-Emmett-Teller, X-ray diffraction, scanning electron microscope, Thermal gravimetric analyzer (TG) etc. Moreover, the adsorption capacity was further determined and the results revealed that the PP-based aerogels presented excellent adsorption performance for a wide range of oil products and/or organic solvents (crude oil 49.8 g g^-1, soya bean oil 62.3 g g^-1, chloroform 71.3 g g^-1 etc.). The corresponding cyclic tests showed the absorption capacity decreased slightly from 94.66% to 93.82% after 10 consecutive cycles, indicating a high recyclability.

Functionalization of biodegradable PLA nonwoven fabrics as super-wetting membranes for simultaneous efficient dye and oil/water separation

Although the construction process of dual functional materials for dye and oil/water separation has been developed rapidly, the postprocess of the used separation materials themselves is still a problem owing to their non-degradation in the natural environment.

Preparation of cationic polyelectrolyte grafted polyvinyl alcohol-formaldehyde macroporous hydrogels and their antibacterial properties

A series of novel antibacterial porous cationic PVF-g-PDMC hydrogels, synthesized by radical polymerization using ceric ammonium nitrate as an initiator, show excellent antibacterial properties, and can be used as biomedical materials.

Decomposable Polyvinyl Alcohol-Based Super-Hydrophobic Three-Dimensional Porous Material for Effective Water/Oil Separation

The development of the oil industry brings the critical problem of ocean pollution by oil spill or fossil fuels. The use of materials for water/oil separation is one of the effective approaches to solve this crisis. Polyvinyl alcohol (PVA) has been used  to prepare water/oil separation materials. Currently, glutaraldehyde has been employed as the cross-linking agent, which is well known to be toxic and environmentally unfriendly. Moreover, it is difficult to deal with the disposal of the Across-linked material. Here, we propose a strategy of fabricating macroporous material which was prepared by PVA and sodium silicate (Na₂SiO₃) in aqueous solution. Following through with the one-step method of sol-gel reaction of hydroxyl groups with trimethoxy(octadecyl)silane, the low surface energy substance was grafted on the macroporous material and a super-hydrophobic macroporous membrane for water/oil separation was prepared. As oil sorbent, the as-prepared dried super-hydrophobic PVA/Na₂SiO₃ porous materials (PSD6S) have the adsorption capacity of 1.8-7.0 g/g for oil uptake, which depends on the type of oil liquid. Typically, the separation efficiency of this material could reach more than 99% even after 10 times of use without the help of ambient pressure. It is noteworthy that the as-prepared samples could be easily decomposable and dissolvable completely in acidic medium at a rapid rate.

Binding of Lignin Nanoparticles at Oil-Water Interfaces: An Ecofriendly Alternative to Oil Spill Recovery

Synthetic amphiphiles used for managing large-scale oil spills have a toxic impact on the environment and marine life. Developing new oil spill recovery technologies is critical to minimize the environmental and ecological impact of such disasters. Here, we show that a mixture of lignin nanoparticles and 1-pentanol forms a biocompatible alternative to nondegradable, synthetic amphiphiles used for oil spill recovery. The pentanol in the mixture generates initial Marangoni flow and confines the spilled oil into a thick slick on the surface of water. While the alcohol solubilizes, lignin nanoparticles irreversibly adsorb onto the oil-water interface. We find that the lignin nanoparticle adsorption to the oil-water interface is governed by a combination of electrostatic, van der Waals, and hydrophobic interactions between the particles and the interface. These interactions, combined with interparticle electrostatic repulsion between nanoparticles adsorbed at the oil-water interface, drive the formation of a submonolayer. The submonolayer transforms into a film of jammed nanoparticles due to compressive stress acting on the interface upon the solubilization of pentanol. This interfacial layer of lignin nanoparticles restricts oil from respreading and locks the oil in its confined state. The herded state of the oil with the interfacial layer of nanoparticles facilitates safe removal of the spilled oil using mechanical methods. The study presents a new principle of using a mixture of heavy alcohol and biocompatible nanoparticles for oil herding applications, thus providing an ecofriendly alternative to oil spill recovery.

Oil/water separation based on natural materials with super-wettability: recent advances

The frequency of oil spills and the increasing amount of oily sewage not only cause serious water pollution as well as a lot of ecological problems but also result in huge economic losses. To address such problems, developing advanced technologies and materials for achieving efficient oil/water separation is a critical way and emerging as a hot research topic nowadays. Herein, we have reviewed the recent developments in oil/water separation by using superwetting porous materials, mainly focusing on natural materials. By using natural materials as examples, we show how to use superwetting porous materials to separate different mixtures of water and oil, including the inherent superwettability of the natural materials, separating method/process, and separation mechanism. Natural superwetting materials are usually low-cost and eco-friendly, and can be easily obtained, so oil/water separation based on natural materials has great promise to address the above-mentioned globally recognized oil contamination challenge. In addition, these natural examples seem more attractive to the general researcher who is new to this field as well as the expert and even the public, since natural materials look more interesting than artificial complex materials. We believe our review will help beginners better understand the significance, application value, mechanism and principle of oil/water separation by superwetting porous materials.

Novel multifunctional polymethylsilsesquioxane-silk fibroin aerogel hybrids for environmental and thermal insulation applications

The development of aerogels with improved mechanical properties, to expand their utility in high-performance applications, is still a big challenge. Besides fossil-fuel based polymers that have been extensively utilized as platforms to enhance the mechanical strength of silsesquioxane and silica-based aerogels, using green biopolymers from various sustainable renewable resources are currently drawing significant attention. In this work, we process silk fibroin (SF) proteins, extracted from silkworm cocoons, with organically substituted alkoxysilanes in an entirely aqueous based solution via a successive sol-gel approach, and show for the first time that it is possible to produce homogeneous interpenetrated (IPN) polymethylsilsesquioxane (PMSQ)-SF hybrid aerogel monoliths with significantly improved mechanical properties. Emphasis is given to an improvement of the molecular interaction of the two components (SF biopolymer and PMSQ) using a silane coupling agent and to the design of pore structure. We succeeded in developing a novel class of compressible, light-weight, and hierarchically organized meso-macroporous PMSQ-SF IPN hybrid aerogels by carefully controlling the sol-gel parameters at a molecular level. Typically, these aerogels have a compressive strength (δ max) of up to 14 MPa, together with high flexibility in both compression and bending, compressibility up to 80% strain with very low bulk density (ρ b) of 0.08-0.23 g cm-3. By considering these promising properties, the superhydrophobic/oleophilic PMSQ-SF aerogel hybrids exhibited a high competency for selective absorption of a variety of organic pollutants (absorption capacities ∼500-2600 g g-1 %) from water and acted as a high-performance filter for continuous water/oil separation. Moreover, they have demonstrated impressive thermal insulation performance (λ = 0.032-0.044 W m-1 K-1) with excellent fire retardancy and self-extinguishing capabilities. Therefore, the PMSQ-SF aerogel hybrids would be a new class of open porous material and are expected to further extend the practical applications of this class of porous compounds.

Superhydrophobic/Superoleophilic and Reinforced Ethyl Cellulose Sponges for Oil/Water Separation: Synergistic Strategies of Cross-linking, Carbon Nanotube Composite, and Nanosilica Modification

Superhydrophobic/superoleophilic and reinforced ethyl cellulose (SEC) sponges were prepared by cross-linking EC with epichlorohydrin (ECH) and complexing with silanized carbon nanotubes (Si-CNTs) followed by coating nanosilica on the surface of porous sponges and subsequent modification with hexadecyltrimethoxysilane (HDTMS). These synergistic strategies endowed the SEC sponges with the superhydrophobic/superoleophilic properties (θ_water = 158.2°, θ_oil = 0°, sliding angle = 3°) and outstanding mechanical properties (could bear the pressure of 28.6 kPa without damage). The unique micronanostructures and properties of the porous sponges were characterized by scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX), transmission electron microscopy (TEM), thermogravimetric analysis (TGA), and water contact angle measurements. The as prepared SEC sponges with high mechanical strength were able to collect a wide range of oils and organic solvents with absorption capacity up to 64 times of their own weight. Furthermore, the absorption capacity of the sponges decreased slightly to 86.4% of its initial value after 50 separation cycles, suggesting their excellent recyclable performance. The high efficiency and endurability of the sponges during oil/water separation made them ideal absorbent in oil spillage cleanup.

Hydrophobic, Superabsorbing Aerogels from Choline Chloride-Based Deep Eutectic Solvent Pretreated and Silylated Cellulose Nanofibrils for Selective Oil Removal

Superabsorbents are highly appealing materials for use in cleaning up oil and chemical spills. However, the development of a low-cost, highly efficient superabsorbent remains a major challenge. This paper demonstrates a straightforward method of producing a cellulose nanofibril aerogel that is low-cost, ultralight, highly porous, hydrophobic, and reusable superabsorbing cellulose nanofibril aerogel from recycled waste fibers using a simple, environmentally friendly nanofibrillation treatment involving deep eutectic solvent and freeze-drying. Nanofibrillation and hydrophobic modification (silylation) of waste cellulose fibers resulted in nanofibril sponges with ultralow density (0.0029 g/cm³) and high porosity (up to 99.81%) after freeze-drying. These sponges exhibited excellent absorption performances for various oils and organic solvents and were reusable. In particular, the nanofibril aerogels showed selectivity in absorbing marine diesel oil from an oil-water mixture and possessed ultrahigh absorption capacities of up to 142.9 g/g, much higher than those of the commercial absorbent materials (i.e., polypropylene-based material) (8.1-24.6 g/g) that were used as references. The absorbed oil could easily be recovered by means of simple mechanical squeezing. In addition, the nanofibril sponges exhibited excellent reusability, maintaining a high capacity to absorb diesel oil for at least 30 cycles at 71.4-81.0% of capacity compared to a fresh absorbent. The above-mentioned advantages make cellulose nanofibril superabsorbents created from recycled waste cellulose fibers promising material for cleaning oil and chemical spills.