Highly selective probe detects Cu2+ and endogenous NO gas in living cell

A lysosome-targeting rhodamine fluorescent probe for Cu2+ detection and its applications in test kits and zebrafish imaging

Tracing copper ions levels in the environment and subcellular microenvironment is crucial due to the key role copper ions play in physiological and pathological processes. Herein, a novel naphthalimide-fused rhodamine probe Rh-Naph-Cu was prepared through modification with phenylhydrazine to produce a closed and non-fluorescent spirolactam. Based on the copper-induced spirolactam ring-opening and hydrolysis process, Rh-Naph-Cu can be employed as a fluorescence off-on probe for copper ions with high selectivity, high sensitivity (limit of detection: 33.0 nM), broad pH-response range (pH: 5.0-10.0), and color change visible with the naked eye. Rh-Nap-Cu could be made into test strips for the in-situ chromogenic detection of Cu2+. Significantly, Rh-Naph-Cu can be utilized for the detection of copper ions in living HeLa cells and zebrafish, and exhibits excellent lysosomal-targeting ability with high Pearson's correlation coefficient (PCC) of 0.96.

A dual-response ratiometric near-infrared fluorescence probe based on cyanine platform for Cu2+ detection and its imaging in vitro and vivo

A near-infrared fluorescent probe (NUST-Cy-1) was disclosed here, which displays ratiometric and dual-channel response for Cu2+ (λex1 = 450 nm, λex2 = 750 nm) with large Stokes shifts (143 nm, 375 nm, 75 nm respectively). This probe demonstrates high sensitivity with low detection limit (1.4 μM) and selectivity for Cu2+ detection. Furthermore, fluorescent imaging of Cu2+ in vitro and vivo were successfully achieved.

H-Aggregation of Squaraine Dye as Generic Colorimetric Molecules to Detect Cu2

An infrared squaraine dye was utilized to detect Cu2+ in solvents based on H-aggregates of squaraine dye. H-aggregates are a type of aggregation with enhanced photophysical properties compared to monomers. In the presence of a Ca2+ solution, F-Cl offers exceptional H-aggregators that can be transformed into monomers by adding Cu2+. Furthermore, this mode successfully demonstrated fluorescence changes in HeLa cells cultured in vitro after the addition of Ca2+ or Cu2+. A highly specific detection of Cu2+ was achieved using this transformation mode.

Ex Tenebris Lux: Illuminating Reactive Oxygen and Nitrogen Species with Small Molecule Probes

Reactive oxygen and nitrogen species are small reactive molecules derived from elements in the air─oxygen and nitrogen. They are produced in biological systems to mediate fundamental aspects of cellular signaling but must be very tightly balanced to prevent indiscriminate damage to biological molecules. Small molecule probes can transmute the specific nature of each reactive oxygen and nitrogen species into an observable luminescent signal (or even an acoustic wave) to offer sensitive and selective imaging in living cells and whole animals. This review focuses specifically on small molecule probes for superoxide, hydrogen peroxide, hypochlorite, nitric oxide, and peroxynitrite that provide a luminescent or photoacoustic signal. Important background information on general photophysical phenomena, common probe designs, mechanisms, and imaging modalities will be provided, and then, probes for each analyte will be thoroughly evaluated. A discussion of the successes of the field will be presented, followed by recommendations for improvement and a future outlook of emerging trends. Our objectives are to provide an informative, useful, and thorough field guide to small molecule probes for reactive oxygen and nitrogen species as well as important context to compare the ecosystem of chemistries and molecular scaffolds that has manifested within the field.

Shining New Light on Biological Systems: Luminescent Transition Metal Complexes for Bioimaging and Biosensing Applications

Luminescence imaging is a powerful and versatile technique for investigating cell physiology and pathology in living systems, making significant contributions to life science research and clinical diagnosis. In recent years, luminescent transition metal complexes have gained significant attention for diagnostic and therapeutic applications due to their unique photophysical and photochemical properties. In this Review, we provide a comprehensive overview of the recent development of luminescent transition metal complexes for bioimaging and biosensing applications, with a focus on transition metal centers with a d6, d8, and d10 electronic configuration. We elucidate the structure-property relationships of luminescent transition metal complexes, exploring how their structural characteristics can be manipulated to control their biological behavior such as cellular uptake, localization, biocompatibility, pharmacokinetics, and biodistribution. Furthermore, we introduce the various design strategies that leverage the interesting photophysical properties of luminescent transition metal complexes for a wide variety of biological applications, including autofluorescence-free imaging, multimodal imaging, organelle imaging, biological sensing, microenvironment monitoring, bioorthogonal labeling, bacterial imaging, and cell viability assessment. Finally, we provide insights into the challenges and perspectives of luminescent transition metal complexes for bioimaging and biosensing applications, as well as their use in disease diagnosis and treatment evaluation.

MOFs as versatile scaffolds to explore environmental contaminants based on their luminescence bustle

Metal-Organic Frameworks (MOFs) with luminescent properties hold significant promise for environmental remediation. This review critically examines recent research on these materials design, synthesis, and applications, mainly focusing on their role in combating environmental pollutants. Through a comprehensive analysis of metal ions, ligands, and framework compositions, the review discusses the importance of tailored design and synthesis approaches in achieving desired luminescent characteristics. Key findings highlight the effectiveness of luminous MOFs as fluorescent sensors for a wide range of contaminants, including heavy metals, reactive species, antibiotics, and explosives. Considering all this, the review discusses future research needs and opportunities in the field of luminous MOFs. It emphasizes the importance of developing multifunctional materials, refining design methodologies, exploring sensing mechanisms, and ensuring environmental compatibility, scalability, and affordability. By providing insights into the current state of research and outlining future directions, this review is a valuable resource for researchers seeking to address environmental challenges using MOF-based solutions.

Red-emitting carbon dots aggregates-based fluorescent probe for monitoring Cu2

R-CDAs have been synthesized in a one-pot solvothermal procedure starting from 3,4-diaminobenzoic acid in an acidic medium. Transmission electron microscopy (TEM) revealed that R-CDAs nanoparticles exhibited a much larger diameter of 7.2-28.8 nm than traditional monodisperse carbon dots. X-ray photoelectron spectroscopy (XPS) and Fourier transform infrared spectroscopy (FT-IR) revealed the presence of polar functional groups (hydroxyl, amino, carboxyl) on the surface of R-CDAs. Upon excitation with visible light (550 nm), R-CDAs emit stable, red fluorescence with a maximum at 610 nm. Under the optimum conditions, Cu²⁺ ions quench the fluorescence of this probe, and the signal is linear in a concentration range of copper ions between 5 and 600 nM with the detection limit of only 0.4 nM. Recoveries from 98.0 to 105.0% and relative standard deviations (RSD) from 2.8 to 4.5% have been obtained for detection of Cu²⁺ in real water samples. Furthermore, the R-CDAs fluorescent probe showed negligible cytotoxicity toward HeLa cells and good bioimaging ability, suggesting its potential applicability as a diagnostic tool in biomedicine.

Triphenylamine-embedded copper(II) complex as a "turn-on" fluorescent probe for the detection of nitric oxide in living animals

Nitric oxide (NO) is one of three major signaling molecules, which is involved in a large amount of physiological and pathological processes in biological systems. Furthermore, more and more evidence indicates that NO levels are closely associated with several aspects of human health. Accordingly, it is of great significance to develop a convenient and reliable detection method for NO in biological systems. In this work, a novel triphenylamine-embedded copper(II) complex (NZ-Cu²⁺) has been developed to be used as a fluorescence probe for the detection of NO in living animals. The proposed sensing mechanism of NZ-Cu²⁺ towards NO has been confirmed by high-resolution mass spectrometry, spectroscopic titration and density functional theory calculation. NO induced the conversion of paramagnetic Cu²⁺ to diamagnetic Cu⁺, which blocked the photoinduced electron transfer process of NZ-Cu²⁺, resulting in a remarkable enhancement of the emission spectra. The NZ-Cu²⁺ probe possesses several advantages including high selectivity, low detection limit (12.9 nM), long emission wavelength (640 nm), large Stokes shift (201 nm), fast response time (60 s) and low cytotoxicity. More importantly, NZ-Cu²⁺ has been successfully applied to detect NO in vivo by fluorescence imaging.

Fluorescence Variation in Selective Sensing of Hg2+and Cu2+ Ions By Coumarin-xanthene Fused Optical Probe

The fluorescent moieties coumarin and xanthene (R6GCP) combined in a single molecule was designed and synthesized. The colorimetric and fluorescent variation of the probe towards the copper and mercury ions sensing is examined. With the added copper/mercury ions to the solution of R6GCP in DMF:H2O (2:8, v/v), the probe showed deep red color from yellow color. The probe showed turn-off and turn-on fluorescence for copper and mercury ion respectively. In the presence of other competing metal ions, the probe showed better sensitivity towards copper and mercury ions. The probe's detection limit found to be 5.29 × 10^-6 M and 1.24 × 10^-5 M for Cu²⁺ and Hg²⁺ ion respectively by the UV-visible spectral measurement. Fluorescence measurement, the detection limit for the Cu²⁺ and Hg²⁺ ions detection by this probe is 1.91 × 10^-7 M, and 1.32 × 10^-8 M respectively. 1:1 binding stoichiometry was confirmed between the probe and Cu²⁺/Hg²⁺ ions from jobs plot by UV-visible spectral technique. Moreover, R6GCP combined filter paper were prepared. These test paper containing probe could detect Cu²⁺/Hg²⁺ ions in real-time with a spontaneous color change.

A novel dual-channel fluorescent probe for selectively and sensitively imaging endogenous nitric oxide in living cells and zebrafish

Nitric oxide (NO) plays various physiological and pathological roles in lots of biological processes. It is crucial to detect NO sensitively and selectively in vivo and in vitro as homeostasis of NO is closely related to various diseases. Herein, a novel dual-channel fluorescent dye (ENNH₂) based on dicarboxyimide anthracene was developed as a highly sensitive and selective probe to detect NO in living systems using the dual-channel fluorescence. ENNH₂ can emit bright red fluorescence due to the intramolecular charge transfer (ICT) from the amino group at the 6-position of 1,2-dicarboxyimide anthracene to the conjugated aromatic ring, and the ICT is effectively inhibited by the reductive deamination of the amino in the presence of NO to obtain the remarkable strong green emission with the excellent sensitivity (5.52 nM). Promisingly, ENNH₂ exhibits an excellent performance in endogenous NO dual-channel fluorescence imaging of RAW 264.7 cells and zebrafish.

A turn-on fluorescent probe with high selectivity for Hg2+ and its applications in living cells

A novel fluorescent probe L with a rhodamine B lactam structure modified with 3-methyl-2-thiophenecarboxaldehyde has been prepared based on the thiophilicity of Hg²⁺. The probe L exhibits a unique response with an “off–on-type” mode towards Hg²⁺ among other biologically relevant metal cations. The limit of detection (LOD) for probe L is 1.5 ppb. In addition, in the presence of Hg²⁺, the probe L shows a colorimetric response from colorless to pink. The recognition behavior of probe L towards Hg²⁺ has been investigated by ¹H NMR titration experiments, Job's plot, and MS and IR analyses. As a result, the ligation between the probe and Hg²⁺ leads to the scission of the spirolactam bond of free L and the restoration of its conjugated structure, which can give rise to the fluorescence enhancement of the probe L. Besides, it also can be used as a sensitivity probe in living cells for Hg²⁺ sensing, which can meet various needs in genetic and environmental samples.

A novel colorimetric fluorescent probe with low detection limits has been designed and synthesized, which shows an unique response for Hg²⁺ in living cells.

Low Molecular Weight Probe for Selective Sensing of PH and Cu2+ Working as Three INHIBIT Based Digital Comparator

A novel simple molecular chemosensor 2 was synthesized and examined for pH, cations and anions detection. At pH values higher than 10, probe 2 switches on a green emission where the excited state intramolecular proton transfer (ESIPT) is ceased. Also, the probe absorption spectrum shows a clear pH dependence, and the probe aqueous solution (ethanol/water = 1:2, borate buffer) responds selectively and sensitively through its fluorescence spectrum to the presence of Cu²⁺. Job's plot gave a 2:1 stoichiometry of Probe-2/Cu²⁺ complex, which responds to the presence of S^2- and H₂PO₄^- in aqueous solution (ethanol/water = 1:2, borate buffer) by its absorption and fluorescence spectra. In addition, probe 2 mimics a digital comparator based on three INHIBIT logic gates by different outputs using HO^- and H⁺ as inputs. Moreover, probe 2 also executes AND and NOT TRANSFER logic gates using Cu²⁺ and S^2- as inputs.

Metal-organic gel as a fluorescence sensing platform to trace copper(II)

Metal-organic gel (MOG), as a novel type of metallic organic hybrid material, exhibits diverse properties. However, its application in fluorescence detection for specific metal ions has rarely been exploited. In this work, we have designed and synthesized a MOG based on Al-carboxylate coordination assemblies (denoted as MOG-Al). The resultant MOG-Al shows good specific fluorescence signal response to trace Cu²⁺. Under optimal conditions, the fluorescence quenching degrees (F₀ - F) of the MOG-Al have a linear correlation with Cu²⁺ concentration ranging from 0.05 to 100 μM, and the limit of detection (LOD) is 45.00 nM. The proposed sensing platform was also applied for the detection of Cu²⁺ in real samples. Satisfactory recoveries (92-116%) for Cu²⁺ in rice, soybean milk powder and pork liver were obtained. These results indicate that MOG-Al is a promising material for the specific and sensitive sensing of Cu²⁺.

New thiophene hydrazide dual-functional chemosensor: Colorimetric sensor for Cu2+ & fluorescent sensor for Al3

A new thiophene hydrazide derivative TSB was synthesized and utilized as naked-eye colorimetric sensor for Cu²⁺ by the color changed from colorless to yellow as well as green fluorescent turn on sensor for Al³⁺ in DMSO/H₂O (1/1, V/V) solution. The dual-functional chemosensor TSB for Cu²⁺/Al³⁺ sensing displayed excellent properties of special selectivity, superior sensitivity, outstanding anti-interference performance, instantaneous response, wide pH working range and good reversibility. The detection limits of TSB for Cu²⁺/Al³⁺ were determined as low as 46.5 nM and 32.7 nM, respectively. The 1:1 binding mode of TSB with Cu²⁺/Al³⁺ was proved by spectrometric titrations, Job's plots, FTIR, ¹H NMR and HRMS analysis. Moreover, chemosensor TSB was successfully utilized for detection of Cu²⁺ and Al³⁺ in real environmental water and food samples with high reliability, demonstrating its practical applicability.

Rhodamine-Appended Benzophenone Probe for Trace Quantity Detection of Pd2+ in Living Cells

Designing a fluorogenic probe for the determination of Pd²⁺ is a challenging analytical task. Pd²⁺ is a potentially toxic and harmful substance even at a very low level of contamination in the end product. Herein, a promising spirolactam-functionalized chemosensor, rhodamine-appended benzophenone (HBR), is designed and characterized by spectroscopic (¹H NMR, ¹³C NMR, ESI-MS, and FT-IR) data along with the single-crystal X-ray diffraction technique. It acts as a highly sensitive and selective fluorogenic chemosensor for Pd²⁺ ions over other environmentally relevant cations in aqueous ethanol (1:1, v/v) at pH 7.4. The limit of detection (LOD) is 34 nM that is far below the WHO recommended Pd uptake (47 μM). The plausible mechanism involves the specific binding of HBR with Pd²⁺ and the formation of 1:1 stoichiometry of the complex, which has been supported by ESI-MS, FT-IR data, Job plot, and association constant data (Benesi-Hildebrand plot). The computation study has been attempted to explain the ring cleavage fluorescence enhancement scheme of HBR upon binding with Pd²⁺. Furthermore, this "turn-on" probe has successfully applied to image the Pd²⁺ ion in cultured MDA-MB-231 cells.

Near-infrared fluorescent probe for selective detection of Cu2+ in living cells and in Vivo

A NIR-rhodamine fluorescent probe was designed and successfully synthesized. The structure of the probe NRh-Cu was characterized by ¹H NMR, ¹³C NMR and HRMS. The probe was found to show high sensitivity and high selectivity. The detection limit was calculated to be as low as 0.95 ppb. The sensing mechanism was proposed and confirmed by HRMS spectra. Furthermore, it could be used for imaging Cu²⁺ in living cells and in vivo.

BODIPY-Based Fluorescent Probe for Dual-Channel Detection of Nitric Oxide and Glutathione: Visualization of Cross-Talk in Living Cells

Nitric oxide (NO) and glutathione (GSH) have interplaying roles in oxidant-antioxidant balance. In this work, we developed the first example of a single fluorescent probe that displayed a turn-on fluorescence response toward NO and GSH from dual emission channels. The probe was synthesized by introducing 4-amino-3-(methylamino)-phenol to a BODIPY scaffold. Specifically, the NO-mediated transformation of diamine into a triazole triggered the fluorescence in the green channel, and the GSH-induced S_NAr substitution reaction led to the red-shifted emission in the red channel. The probe was successfully applied to detect the exogenous and endogenous NO and GSH in macrophage cells. More importantly, the probe revealed that NO induced by interferon-γ (IFN-γ), lipopolysaccharide (LPS), and l-arginine (l-Arg) could also elicit the augmentation of intracellular GSH. We anticipate the probe would hold great potential for investigating the redox balance in biological processes.

A nanomolar detection of mercury(II) ion by a chemodosimetric rhodamine-based sensor in an aqueous medium: Potential applications in real water samples and as paper strips

A new promising rhodamine based colorimetric and fluorometric chemosensor, RDV has been designed and synthesized for specific detection of Hg²⁺ ion. It acts as highly selective "turn-on" fluorescent chemosensor for Hg²⁺ ion without interference from other competitive metal ions in aqueous acetonitrile medium. The drastic color change with addition of Hg²⁺, from colorless to pink, indicates RDV can acts as "naked-eye" indicator for Hg²⁺. The Hg²⁺ promoted selective hydrolysis of appended vinyl ether group in RDV followed by Hg²⁺ chelated complex formation with concomitant opening of spirolactam ring is the plausible sensing mechanism. The detailed absorption, fluorescence, ¹H NMR, ¹³C NMR and mass spectrometry confirms the proposed sensing mechanism. The limit of detection (LOD) of Hg²⁺ by RDV is 136 nM indicating the high sensitivity towards Hg²⁺. The RDV shows consistent spectroscopic response in biological pH range 4-10. In addition to explore practical applicability of RDV, its paper strips have been made and used to detect Hg²⁺ in pure water solution up to 10 ppm level. Furthermore, the potential application of RDV for the sensing of Hg²⁺ in real water samples (tap water and drinking waters from different sources) were also monitored and demonstrated.

A pyrazolopyrimidine based fluorescent probe for the detection of Cu2+ and Ni2+ and its application in living cells

A fluorescent sensor L based on a pyrazolopyrimidine core simultaneously detects Cu²⁺ and Ni²⁺ ions by photoluminescence quenching, even in the presence of other metal cations. Sensor L possesses high association constants of 5.24 × 10³ M^-1 and 2.85 × 10⁴ M^-1 and low detection limits of 0.043 μM and 0.038 μM for Cu²⁺ and Ni²⁺, respectively. The binding stoichiometry ratios of L to Cu²⁺ or Ni²⁺ is 1:1 as determined by Benesi-Hildebrand and Job's plots, and by crystal structures. DFT calculations on L-Cu²⁺ indicated reduced electron donation from the coordinated pyrazolopyridine to the fused pyrimidine and pendant phenyl group which, together with a smaller HOMO-LUMO orbital gap could favour non-radiative decay and explain the observed fluorescence quenching. Sensor L possessed low cytotoxicity and good imaging characteristics for Cu²⁺ and Ni²⁺ in living cells, suggesting potential applications for detecting Cu²⁺ and Ni²⁺in vivo.

Green and Red Fluorescent Dyes for Translational Applications in Imaging and Sensing Analytes: A Dual-Color Flag

Red and green are two of the most-preferred colors from the entire chromatic spectrum, and red and green dyes are widely used in biochemistry, immunohistochemistry, immune-staining, and nanochemistry applications. Selective dyes with green and red excitable chromophores can be used in biological environments, such as tissues and cells, and can be irradiated with visible light without cell damage. This critical review, covering a period of five years, provides an overview of the most-relevant results on the use of red and green fluorescent dyes in the fields of bio-, chemo- and nanoscience. The review focuses on fluorescent dyes containing chromophores such as fluorescein, rhodamine, cyanine, boron-dipyrromethene (BODIPY), 7-nitobenz-2-oxa-1,3-diazole-4-yl, naphthalimide, acridine orange, perylene diimides, coumarins, rosamine, Nile red, naphthalene diimide, distyrylpyridinium, benzophosphole P-oxide, benzoresorufins, and tetrapyrrolic macrocycles. Metal complexes and nanomaterials with these dyes are also discussed.

In vivo imaging of hepatocellular nitric oxide using a hepatocyte-targeting fluorescent sensor

A hepatocyte-targeting fluorescent NO sensor has been fabricated with good water solubility, excellent selectivity, and high sensitivity (∼1.62 nM).

Real-time detection and imaging of copper(ii) in cellular mitochondria

L displays high selectivity for Cu²⁺ with a rapidly reversible on–off–on fluorescence switch.

Pyrene–fluorescein-based colour-tunable AIE-active hybrid fluorophore material for potential live cell imaging applications

A novel hybrid fluorophore (FHPY) has been synthesized based on two standard fluorescent hydrophobic–hydrophilic molecules, viz. pyrene and fluorescein, with an objective to tune the AIE along with the morphology and live cell imaging.

Rhodamine 6G hydrazone with coumarin unit: a novel single-molecule multianalyte (Cu2+ and Hg2+) sensor at different pH value

An effective colourimetric and ratiometric fluorescent probe for Cu²⁺ in neutral aqueous media was synthesised. Moreover, the probe could sense Hg²⁺ with fluorescence enhancement at high pH.

A ratiometric mitochondria-targeting two-photon fluorescent probe for imaging of nitric oxide in vivo

A two-photon ratiometric fluorescent probe (Mito-N) has been developed for monitoring mitochondrial nitric oxide (NO) in vivo.