Electrochemical switching with 3D DNA tetrahedral nanostructures self-assembled at gold electrodes

DNA tetrahedron-based dual-signal fluorescence detection of apoE4 gene sites on a microplate reader

As a neurodegenerative disorder, Alzheimer's disease (AD) is characterized by cognitive dysfunction and behavioral impairment. Among the various genetic risk factors for AD, apoE4 gene plays a pivotal role in the onset and progression of AD, and detection of apoE4 gene holds significance for prevention and early diagnosis of AD. Herein, dual-signal fluorescence detection of fragments associated with apoE ε4 allele near codon 112 (Tc1) and codon 158 (Tc2) was achieved using DNA tetrahedron nanostructure (DTN). The Förster resonance energy transfer (FRET) process in the DTN was initiated in which the nucleic acid intercalating dye thiazole orange (TO) served as the donor and the cyanine dyes of cyanine3 (Cy3) and cyanine5 (Cy5) at the two vertices of DTN served as the acceptors. In the presence of Tc1 and Tc2, the FRET process between TO and the cyanine dyes was hindered by the enzymatic cleavage reaction, which ensures the dual-signal fluorescence assay of apoE4 gene sites. The limit of detection for Tc1 and Tc2 was estimated to be 0.82 nM and 0.77 nM, respectively, and the whole assay was accomplished within 1 h on a microplate reader. The proposed method thus possesses the advantages of easy operation, short detection time, and high-throughput capability.

DNA nanotechnology for nucleic acid analysis: sensing of nucleic acids with DNA junction-probes

DNA nanotechnology deals with the design of non-naturally occurring DNA nanostructures that can be used in biotechnology, medicine, and diagnostics. In this study, we introduced a nucleic acid five-way junction (5WJ) structure for direct electrochemical analysis of full-length biological RNAs. To the best of our knowledge, this is the first report on the interrogation of such long nucleic acid sequences by hybridization probes attached to a solid support. A hairpin-shaped electrode-bound oligonucleotide hybridizes with three adaptor strands, one of which is labeled with methylene blue (MB). The four strands are combined into a 5WJ structure only in the presence of specific DNA or RNA analytes. Upon interrogation of a full-size 16S rRNA in the total RNA sample, the electrode-bound MB-labeled 5WJ association produces a higher signal-to-noise ratio than electrochemical nucleic acid biosensors of alternative design. This advantage was attributed to the favorable geometry on the 5WJ nanostructure formed on the electrode's surface. The 5WJ biosensor is a cost-efficient alternative to the traditional electrochemical biosensors for the analysis of nucleic acids due to the universal nature of both the electrode-bound and MB-labeled DNA components.

The Roadmap of Graphene-Based Sensors: Electrochemical Methods for Bioanalytical Applications

Graphene (GR) has engrossed immense research attention as an emerging carbon material owing to its enthralling electrochemical (EC) and physical properties. Herein, we debate the role of GR-based nanomaterials (NMs) in refining EC sensing performance toward bioanalytes detection. Following the introduction, we briefly discuss the GR fabrication, properties, application as electrode materials, the principle of EC sensing system, and the importance of bioanalytes detection in early disease diagnosis. Along with the brief description of GR-derivatives, simulation, and doping, classification of GR-based EC sensors such as cancer biomarkers, neurotransmitters, DNA sensors, immunosensors, and various other bioanalytes detection is provided. The working mechanism of topical GR-based EC sensors, advantages, and real-time analysis of these along with details of analytical merit of figures for EC sensors are discussed. Last, we have concluded the review by providing some suggestions to overcome the existing downsides of GR-based sensors and future outlook. The advancement of electrochemistry, nanotechnology, and point-of-care (POC) devices could offer the next generation of precise, sensitive, and reliable EC sensors.

Electrochemical Aptasensing of SARS-CoV-2 Based on Triangular Prism DNA Nanostructures and Dumbbell Hybridization Chain Reaction

Development of convenient, accurate, and sensitive methods for rapid screening of severe acute respiratory syndrome-coronavirus 2 (SARS-CoV-2) infection is highly desired. In this study, we have developed a facile electrochemical aptasensor for the detection of the SARS-CoV-2 S1 protein amplified by dumbbell hybridization chain reaction (DHCR). A triangular prism DNA (TPDNA) nanostructure is first assembled and modified at the electrode interface. Due to the multiple thiol anchors, the immobilization is quite stable. The TPDNA nanostructure also provides an excellent scaffold for better molecular recognition efficiency on the top single-strand region (DHP0). The aptamer sequence toward the SARS-CoV-2 S1 protein is previously localized by partial hybridization with DHP0. In the presence of the target protein, the aptamer sequence is displaced and DHP0 is exposed. After further introduction of the fuel stands of DHCR, compressed DNA linear assembly occurs, and the product can be stacked on the TPDNA nanostructure for the enrichment of electrochemical species. This electrochemical method successfully detects the target protein in clinical samples, which provides a simple, robust, and accurate platform with great potential utility.

Reagentless detection of staphylococcal enterotoxin B via electrochemical interrogation of conformational changes

An electrochemical biosensor for staphylococcal enterotoxin B (SEB) detection has been designed on the basis of electrochemical interrogation of conformational changes. Ferrocene-labeled hairpin probe (Fc-HP) and SEB aptamer are introduced for the construction of the platform. Without SEB, the rigid construction of DNA duplex that included SEB aptamer and Fc-HP prevented Fc getting access to the electrode surface, keeping the "eT-off" state in the detection system. In the presence of SEB, the interaction between SEB and the aptamer could trigger the disruption of DNA duplex and the restoration of hairpin structure, accompanied by the increase of Fc oxidation current. The decreasing distance between the redox probe and electrode upon the nucleic acid reconfiguration substantially increased the efficiency of eT, which resulted in the enhanced Fc signal. The proposed strategy presented a wide linear detection range from 0.005 to 100 ng mL^-1 with a detection limit down to 3 pg mL^-1 (S/N = 3). To investigate the applicability and reliability of the method in real food samples such as milk samples, we compared the results between this method and the commercial ELISA kit. The relative percentage error between the two assays ranged from -6.42% to 6.31%, indicating that there was no obvious difference between the results.

Self-doped conducting polymers in biomedical engineering: Synthesis, characterization, current applications and perspectives

Recent studies willingly agree that conducting polymers (CPs) are attractive materials for biomedical engineering purposes, mainly because of their unique physicochemical characteristics combining electrical conductivity and high biocompatibility. Nevertheless, the applicability of CPs is restricted by their limited stability under physiological conditions, associated with a decrease in electrical conductivity upon dedoping. Accordingly, modifying chemical structure of CPs to exhibit a self-doping effect seems to be an appealing approach aimed to enhance their functionality. The aim of this review is to provide a current state-of-the-art in the research concerning self-doped CPs, particularly those with potential biomedical applications. After presenting a library of available structure modifications, we describe their physicochemical characteristics, focusing on achievable conductivities, electrochemical, optical and mechanical behaviour, as well as biological properties. To highlight high applicability of self-doped CPs in biomedical engineering, we elaborate on biomedical areas benefiting most from using this type of conducting materials.

An ultrasensitive carcinoembryonic antigen electrochemical aptasensor based on 3D DNA nanoprobe and Exo III

In this study, a highly ordered three dimensional (3D) DNA nanostructure was self-assembled by label-free DNA nanotweezers, which was used as recognized probe to interact with target. Once the target was recognized by the 3D DNA nanoprobe (3D DNT), DNA nanotweezers opened to release target analog (T1). This recognition process was proceeded in homogeneous solution, which can avoid complex electrode modification and improve reaction efficiency. Then these target analogs were captured by the signal DNA probes (E1) modified on the electrode. In the assistance of Exo III, E1 was digested and the T1 was released to participate in the next cycle to realize signal amplification. Finally, an ultrasensitive carcinoembryonic antigen (CEA) electrochemical biosensing with a detection limit of 4.88 fg mL^-1 was developed.

Rational engineering the DNA tetrahedrons of dual wavelength ratiometric electrochemiluminescence biosensor for high efficient detection of SARS-CoV-2 RdRp gene by using entropy-driven and bipedal DNA walker amplification strategy

Fast and effective detection of epidemics is the key to preventing the spread of diseases. In this work, we constructed a dual-wavelength ratiometric electrochemiluminescence (ECL) biosensor based on entropy-driven and bipedal DNA walker cycle amplification strategies for detection of the RNA-dependent RNA polymerase (RdRp) gene of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2). The entropy-driven cyclic amplification reaction was started by the SARS-CoV-2 RdRp gene to generate a bandage. The bandage could combine with two other single-stranded S1 and S2 to form a bipedal DNA walker to create the following cycle reaction. After the bipedal DNA walker completed the walking process, the hairpin structures at the top of the DNA tetrahedrons (TDNAs) were removed. Subsequently, the PEI-Ru@Ti₃C₂@AuNPs-S7 probes were used to combine with the excised hairpin part of TDNAs on the surface of Au-g-C₃N₄, and the signal change was realized employing electrochemiluminescence resonance energy transfer (ECL-RET). By combining entropy-driven and DNA walker cycle amplification strategy, the ratiometric ECL biosensor exhibited a limit of detection (LOD) as low as 7.8 aM for the SARS-CoV-2 RdRp gene. As a result, detecting the SARS-CoV-2 RdRp gene in human serum still possessed high recovery so that the dual-wavelength ratiometer biosensor could be used in early clinical diagnosis.

Tetrahedral DNA nanostructures for effective treatment of cancer: advances and prospects

Recently, DNA nanostructures with vast application potential in the field of biomedicine, especially in drug delivery. Among these, tetrahedral DNA nanostructures (TDN) have attracted interest worldwide due to their high stability, excellent biocompatibility, and simplicity of modification. TDN could be synthesized easily and reproducibly to serve as carriers for, chemotherapeutic drugs, nucleic acid drugs and imaging probes. Therefore, their applications include, but are not restricted to, drug delivery, molecular diagnostics, and biological imaging. In this review, we summarize the methods of functional modification and application of TDN in cancer treatment. Also, we discuss the pressing questions that should be targeted to increase the applicability of TDN in the future.

Recent Progress in DNA Hybridization Chain Reaction Strategies for Amplified Biosensing

With the continuous development of DNA nanotechnology, various spatial DNA structures and assembly techniques emerge. Hybridization chain reaction (HCR) is a typical example with exciting features and bright prospects in biosensing, which has been intensively investigated in the past decade. In this Spotlight on Applications, we summarize the assembly principles of conventional HCR and some novel forms of linear/nonlinear HCR. With advantages like great assembly kinetics, facile operation, and an enzyme-free and isothermal reaction, these strategies can be integrated with most mainstream reporters (e.g., fluorescence, electrochemistry, and colorimetry) for the ultrasensitive detection of abundant targets. Particularly, we select several representative studies to better illustrate the novel ideas and performances of HCR strategies. Theoretical and practical utilities are confirmed for a range of biosensing applications. In the end, a deep discussion is provided about the challenges and future tasks of this field.

Electrochemiluminescence platform for transcription factor diagnosis by using CRISPR-Cas12a trans-cleavage activity

Herein, we exploited the double-stranded DNA (dsDNA) binding property of transcription factor (TF), combined with the trans cleavage characteristic of CRISPR-Cas12a, for the detection of NF-κB p50.

Electrochemical Analysis of Target-Induced Hairpin-Mediated Aptamer Sensors

The state of probe DNA at the biosensing interface greatly affects the detection performance of electrochemical DNA biosensors. Herein, we constructed a target-induced hairpin-mediated biosensing interface to study the effect of probe DNA on the analytical performance of adenosine triphosphate aptamer (ATPA) and adenosine triphosphate (ATP) detection. Moreover, we also explored the electrochemical contribution of the coexisting hairpin and double-stranded DNA (dsDNA) to this sensing interface. Experimental results suggested that the molecular recognition ability and detection performance of the biosensing interface were majorly dependent on the surface density of methylene blue (MB)-labeled probe hairpin DNA and partly affected by the spatial state of the formed dsDNA. When the surface density of hairpin DNA was moderate (5.72 pmol cm^-2), this sensing interface determined as low as 0.74 fM ATPA and 5.04 pM ATP with high selectivity and excellent regeneration, respectively. Furthermore, we calculated that the formed dsDNA had a 31.87% contribution in the total electrochemical signal for 10 pM ATPA detection. Based on the above results, we designed an XOR logic gate based on the biosensing interface for ATPA and ATP detection.

Challenges and Perspectives of DNA Nanostructures in Biomedicine

DNA nanotechnology holds substantial promise for future biomedical engineering and the development of novel therapies and diagnostic assays. The subnanometer-level addressability of DNA nanostructures allows for their precise and tailored modification with numerous chemical and biological entities, which makes them fit to serve as accurate diagnostic tools and multifunctional carriers for targeted drug delivery. The absolute control over shape, size, and function enables the fabrication of tailored and dynamic devices, such as DNA nanorobots that can execute programmed tasks and react to various external stimuli. Even though several studies have demonstrated the successful operation of various biomedical DNA nanostructures both in vitro and in vivo, major obstacles remain on the path to real-world applications of DNA-based nanomedicine. Here, we summarize the current status of the field and the main implementations of biomedical DNA nanostructures. In particular, we focus on open challenges and untackled issues and discuss possible solutions.

An electrochemical biosensor exploiting binding-induced changes in electron transfer of electrode-attached DNA origami to detect hundred nanometer-scale targets

The specific detection in clinical samples of analytes with dimensions in the tens to hundreds of nanometers, such as viruses and large proteins, would improve disease diagnosis. Detection of these "mesoscale" analytes (as opposed to their nanoscale components), however, is challenging as it requires the simultaneous binding of multiple recognition sites often spaced over tens of nanometers. In response, we have adapted DNA origami, with its unparalleled customizability to precisely display multiple target-binding sites over the relevant length scale, to an electrochemical biosensor platform. Our proof-of-concept employs triangular origami covalently attached to a gold electrode and functionalized with redox reporters. Electrochemical interrogation of this platform successfully monitors mesoscale, target-binding-induced changes in electron transfer in a manner consistent with coarse-grained molecular dynamics simulations. Our approach enables the specific detection of analytes displaying recognition sites that are separated by ∼40 nm, a spacing significantly greater than that achieved in similar sensor architectures employing either antibodies or aptamers.

Highly Selective Detection of Metronidazole by Self-Assembly via 0D/2D N-C QDs/g-C3N4 Nanocomposites Through FRET Mechanism

A 0D/2D (0-dimensional/2-dimensional) nanostructure was designed by self-assembly of N-C QDs and carboxylated g-C3N4 nanosheets and used as a fluorescence resonance energy transfer (FRET) fluorescent sensor. The N-C QDs/g-C3N4 nanosheets were synthesized via the amino group on the N-C QD surface and the -COOH of the carboxylated g-C3N4 nanosheets. The mechanism of detection of metronidazole (MNZ) by N-C QDs/g-C3N4 nanocomposites is based on FRET between negatively charged N-QDs and positively charged carboxylated g-C3N4 nanoparticles. N-C QDs/g-C3N4 nanostructures displayed good responses for the detection of MNZ at normal temperature and pressure. The decrease in the fluorescence intensity showed a good linear relationship to MNZ concentration within 0-2.6 × 10-5 mol/L, and the detection limit was 0.66 μM. The novel FRET sensor will have a great potential in clinical analysis and biological studies.

DNA framework-engineered electrochemical biosensors

Self-assembled DNA nanostructures have shown remarkable potential in the engineering of biosensing interfaces, which can improve the performance of various biosensors. In particular, by exploiting the structural rigidity and programmability of the framework nucleic acids with high precision, molecular recognition on the electrochemical biosensing interface has been significantly enhanced, leading to the development of highly sensitive and specific biosensors for nucleic acids, small molecules, proteins, and cells. In this review, we summarize recent advances in DNA framework-engineered biosensing interfaces and the application of corresponding electrochemical biosensors.

Electrochemical nano-genosensor for highly sensitive detection of miR-21 biomarker based on SWCNT-grafted dendritic Au nanostructure for early detection of prostate cancer

MicroRNAs (miRNAs) appear as a novel reliable candidate in biomarkers for early diagnosis of cancer. Due to their roles in various types of cancer, their potential as a diagnostic biomarker is getting more attention. Here, a novel electrochemical biosensor for detection of miR-21 was demonstrated, through combining the advantages of electrochemical methods and nanomaterials with the selectivity of oligonucleotides, based on thiolated receptor probe-functionalized dendritic gold nanostructures (den-Au) via the self-assembly monolayer (SAM) process which grafted on the single-wall carbon nanotubes (SWCNTs) platform on the surface of the fluorine-doped tin oxide (FTO) electrode. Cadmium ions (Cd²⁺) were used as signal units and also signal amplification substance which labeled before on miR-21 target. The oxidation signal of Cd²⁺ as a signal unit was measured by differential pulse voltammetry (DPV) technique that had a very wide linear relationship with the concentration of miR-21 target (0.01 fmol L^-1 to 1 μmol L^-1) and low experimental detection limit of 0.01 fmol L^-1. Furthermore, fabricated biosensor showed acceptable performance in human serum samples and also good selectivity indiscriminate between the complementary target and non-complementary one, so this nano-genosensor can clinically be used for prostate cancer diagnosis through the detection of miR-21 in human serum samples.

Facile and Label-Free Electrochemical Biosensors for MicroRNA Detection Based on DNA Origami Nanostructures

MicroRNAs (miRNAs) have emerged as the promising molecular biomarkers for early diagnosis and enhanced understanding of the molecular pathogenesis of cancers as well as certain diseases. Here, a facile, label-free, and amplification-free electrochemical biosensor was developed to detect miRNA by using DNA origami nanostructure-supported DNA probes, with methylene blue (MB) serving as the hybridization redox indicator, for the first time. Specifically, the use of cross-shaped DNA origami nanostructures containing multiple single-stranded DNA probes at preselected locations on each DNA nanostructure could increase the accessibility and the recognition efficiency of the probes (due to the rational controlled density of DNA probes). The successful immobilization of DNA origami probes and their hybridization with targeted miRNA-21 molecules was confirmed by electrochemical impedance spectroscopy and cyclic voltammetry methods. A differential pulse voltammetry technique was employed to record the oxidation peak current of MB before and after target hybridization. The linear detection range of this biosensor was from 0.1 pM to 10.0 nM, with a lower detection limit of 79.8 fM. The selectivity of the miRNA biosensor was also studied by observing the discrimination ability of single-base mismatched sequences. Because of the larger surface area and unprecedented customizability of DNA origami nanostructures, this strategy demonstrated great potential for sensitive, selective, and label-free determination of miRNA for translational biomedical research and clinical applications.

Targeted Detection of Single-Nucleotide Variations: Progress and Promise

Advances in nucleic acid sequencing and genotyping technologies have facilitated the discovery of an increasing number of single-nucleotide variations (SNVs) associated with disease onset, progression, and response to therapy. The reliable detection of such disease-specific SNVs can ensure timely and effective therapeutic action, enabling precision medicine. This has driven extensive efforts in recent years to develop novel methods for the fast and cost-effective analysis of targeted SNVs. In this Review, we highlight the most recent and significant advances made toward the development of such methodologies.

Emerging Biomimetic Applications of DNA Nanotechnology

Re-engineering cellular components and biological processes has received great interest and promised compelling advantages in applications ranging from basic cell biology to biomedicine. With the advent of DNA nanotechnology, the programmable self-assembly ability makes DNA an appealing candidate for rational design of artificial components with different structures and functions. This Forum Article summarizes recent developments of DNA nanotechnology in mimicking the structures and functions of existing cellular components. We highlight key successes in the achievements of DNA-based biomimetic membrane proteins and discuss the assembly behavior of these artificial proteins. Then, we focus on the construction of higher-order structures by DNA nanotechnology to recreate cell-like structures. Finally, we explore the current challenges and speculate on future directions of DNA nanotechnology in biomimetics.

Silver nanoparticle@DNA tetrahedron-based colorimetric detection of HIV-related DNA with cascade strand displacement amplification

DNA tetrahedron-modified silver nanoparticles (AgNPs) were achieved via amino-silver chemistry for the first time and were applied as a colorimetric biosensor for detecting HIV-related DNA. Target DNA initiated strand displacement polymerization and nicking endonuclease-aided cycles were involved to link DNA tetrahedron-modified AgNPs, reporting colorimetric responses. This developed method showed excellent specificity and sensitivity. A wide linear range from 1 to 15 000 nM was achieved with a limit of detection of 0.84 nM. Moreover, it was successfully applied to determine DNA in blood serum samples.

Stepping gating of ion channels on nanoelectrode via DNA hybridization for label-free DNA detection

Natural ion channels on cell membrane can gate the transport of ions and molecules by the conformational alteration of transmembrane proteins to regulate the normal physiological activities of cells. Inspired by the similarity of the conformation change under specific stimuli, here we introduce an ion channel gating model on a single nanoelectrode by anchoring DNA-gated switches on the very nanotip of gold nanoelectrode to mimic the response-to-stimulus behaviors of ion channels on bio-membranes. The surface-tethered DNA ion channels can be switched on by the Watson-Crick base pairing, which can alter the conformation of the tethered DNA from lying state to upright state. And these conformational alterations of the anchored DNA switches can effectively gate the transport of potassium ferricyanide onto the electrode interface. By continuously initiating the gates with DNA of different concentrations, we achieved the stepping gating of ion channels on a single nanoelectrode. Further, we demonstrated that the ion gating system on nanoelectrode showed excellent sensing performance. For example, the response kinetic was very fast with the signal saturation time of ~1 min, the reproducibility of the OFF/ON switch was robust enough to sustain for two cycles, and simultaneously, the specificity was high enough to distinguish complementary DNA and noncomplementary DNA. When used for label-free DNA detection, the limit of detection can be as low as 10 pM. This study provides a promising avenue to achieve label free and real-time detection of multiple biomolecules.

Engineering of Bioinspired, Size-Controllable, Self-Degradable Cancer-Targeting DNA Nanoflowers via the Incorporation of an Artificial Sandwich Base

In this article, we used an artificial DNA base to manipulate the formation of DNA nanoflowers (NFs) to easily control their sizes and functionalities. Nanoflowers have been reported as the noncanonical self-assembly of multifunctional DNA nanostructures, assembled from long DNA building blocks generated by rolling circle replication (RCR). They could be incorporated with myriad functional moieties. However, the efficacy of these DNA NFs as potential nanocarriers delivering cargo in biomedicine is limited by the bioavailability and therapeutic efficacy of their cargo. Here we report the incorporation of metal-containing artificial analogues into DNA strands to control the size and the functions of NFs. We have engineered bioinspired, size-controllable, self-degradable cancer-targeting DNA nanoflowers (Sgc8-NFs-Fc) via the incorporation of an artificial sandwich base. More specifically, the introduction of a ferrocene base not only resulted in the size controllability of Sgc8-NFs-Fc from 1000 to 50 nm but also endowed Sgc8-NFs-Fc with self-degradability in the presence of H2O2 via Fenton's reaction. In vitro experiments confirmed that Sgc8-NFs-Fc/Dox could be selectively taken up by protein tyrosine kinase 7 (PTK7)-positive cancer cells and subsequently cleaved via Fenton's reaction, resulting in rapid release kinetics, nuclear accumulation, and enhanced cytotoxicity of their cargo. In vivo experiments further confirmed that Sgc8-NFs-Fc has good tumor-targeting ability and could significantly improve the therapeutic efficacy of doxorubicin in a xenograft tumor model. On the basis of their tunable size and on-demand drug release kinetics upon H2O2 stimulation, the Sgc8-NFs-Fc nanocarriers possess promising potential in drug delivery.

Artificial Sandwich Base for Monitoring Single-Nucleobase Changes and Charge-Transfer Rates in DNA

Developing a convenient method to discriminate among different types of DNA nucleotides within a target sequence of the human genome is extremely challenging. We herein report an artificial ferrocene-base (Fe-base) that was synthesized and incorporated into different loci of a DNA strand. The Fe-base replacement on a nucleobase can interact with DNA bases and efficiently discriminate among A, T, G, and C DNA bases of the complementary locus on the basis of interacting electrochemical properties. Furthermore, cyclic-voltammetry (CV) studies demonstrated the electrochemical stability of DNA strands incorporated with Fe-bases and the reversibility of the incorporation. Square-wave voltammetry (SWV) was performed to measure current changes between Fe-bases and bases of interest in the DNA duplex. The changes in the charge-transfer rates appeared to be correlated with the position of the Fe-base in the DNA strand, allowing rapid and efficient sensing of single-nucleobase changes in DNA and showing promise for the design of Fe-oligomer chip technology as a tool for DNA sequencing.

An in situ assembly strategy for the construction of a sensitive and reusable electrochemical aptasensor

In situ assembly of an electroactive AuNPs–Cu²⁺–l-cysteine tag was applied for the construction of a sensitive and reusable aptasensor.

Application of FRET Microscopy to the Study of the Local Environment and Dynamics of DNA SAMs on Au Electrodes

Immobilized DNA probe strands self-assembled on an electrode surface are the bases of many electrochemically based biosensors. Control or measurement of the local environment around each DNA molecule tethered to the electrode surface is needed because the local environment can influence the binding or hybridization efficiency of the target in solution. Measurement of this local environment in buffer or under electrochemical control can be challenging. Here we demonstrate the use of fluorescence microscopy and a Förster resonance energy transfer (FRET) methodology to characterize multicomponent DNA SAMs. The DNA SAMs that were studied were composed of a series of mole fraction ratios of alkylthiol-modified DNA which was labeled with either AlexaFluor488 or AlexaFluor647, a FRET donor and acceptor, respectively. The DNA SAMs were hybridized before assembly onto the electrode surface. Wide-field filter-based FRET microscopy was used to study the assembly of DNA SAMs onto gold bead electrodes. These single-crystal gold bead electrodes contain many surface crystallographic regions which enable the comparison of the adsorbed DNA local environment. These surfaces show that most surface modifications are uniformly prepared, and the FRET efficiency can be explained through simple surface density considerations. The FRET efficiency for different compositions of the donor and acceptor for these regions is also explained through 2D FRET modeling. Not all surfaces were similar to the (111) and (110) regions showing deviations from the expected FRET behavior. Also demonstrated is FRET imaging using a confocal microscope. This approach proves useful in the analysis of a more dynamic system, such as the analysis of reductive desorption of the mixed-component DNA SAM. FRET microscopy is useful for surface analysis of the DNA local environment, enabling a measure of the surface modification, local density, and clustering and eventually a new detection modality.

Multiplexed electrochemical aptasensor for antibiotics detection using metallic-encoded apoferritin probes and double stirring bars-assisted target recycling for signal amplification

Simultaneous and sensitive detection of various antibiotic residues in one sample is essential to evaluation of food safety status. Herein, a multiplexed electrochemical aptasensor for multiplex antibiotics detection, with kanamycin (KANA) and ampicillin (AMP) as representative analytes, was designed by using metal ions encoded apoferrtin probes and double stirring bars-assisted target recycling for signal amplification. The encoded probes were prepared by apoferritin loading Cd²⁺ and Pb²⁺ ions and labeling with duplex DNAs (aptamers corresponding to KANA and AMP hybrid with its complementary DNA sequence), respectively. In the presence of KANA and AMP, the targets can recurrently react with the probes on the bars, and then replace a lot of Apo-Mencoded signal tags into supernatant. The peak currents of Cd²⁺and Pb²⁺from the tags corresponding with the concentrations of KANA and AMP were detected by square wave voltammetry in one run. As a result, KANA and AMP can be detected simultaneously within the range from 0.05 pM to 50 nM. And the detection limits were 18 fM KANA and 15 fM AMP (S/N = 3). The assay was testified to detect KANA and AMP residues with consistent results of ELISA in samples, e.g. milks and fishes. The assay was highly-sensitive, selective, cost-effective and easy-to-operate due to Apo-M encoded probes with high loading capacity of signal source substances. Moreover, double stirring bar-assisted target recycling, which was enzyme-free and could overcome matrix interference, was fabricated for signal amplification. Thus, the assay showed potential advantages for sensitively screening of antibiotic residues in foods.

Solid-State Nanopore Single-Molecule Sensing of DNAzyme Cleavage Reaction Assisted with Nucleic Acid Nanostructure

The detection and investigation of biomolecules at a single-molecule level is important for improving diagnosis in biomedicine. Solid-state nanopores are a unique tool that have the potential to accomplish this task because they are label-free and require only low sample consumption. However, the event-readouts of current small polymer molecules are still limited because of its relatively large size and low signal-to-noise ratios. Here, we present a rapid sensing approach for the detection of GR-5 DNAzyme cleaving specific substrate reactions using relatively larger size silicon nitride nanopores by introducing a type of nucleic acid nanostructure (DNA tetrahedron) as a carrier. The proposed method is convenient and sensitive enough to detect the cleavage reactions by identifying translocation events before and after reactions with nanomolar concentrations of the target sample. Furthermore, this assay was also carried out by using larger size nanopores (60 nm diameter) to achieve the DNAzyme cleavage sensing with the same sample concentration. This approach can improve event detectability of other smaller molecules' translocation, which opens up a wide range of applications for analytes detection by incorporating solid-state nanopores. Nucleic acid nanostructure-assisted nanopore sensing can promote the development of single-molecule studies.

Ultrasensitive Simultaneous Detection of Multiplex Disease-Related Nucleic Acids Using Double-Enhanced Surface-Enhanced Raman Scattering Nanosensors

Developing ultrasensitive probes holds great significance for simultaneous detection of multiplexed cancer-associated nucleic acids. Bimetallic nanoparticles containing silver may be exploited as nanoprobes for disease detection, which can produce stable and strong surface-enhanced Raman scattering (SERS) signals. However, it remains extremely challenging that such SERS nanoprobes are directly synthesized. Herein gold-silver nanosnowmen, grown via a DNA-mediated approach and attached to thiol-containing Raman dyes, are successfully synthesized. Stable SERS-enhanced gold substrates are also prepared and used as the enriching containers, where the capture DNAs are tethered to sense the target genes jointly enhanced by the SERS nanoprobes in a sandwich hybridization assay. This means detection of the target gene can obtain a limit of detection close to 0.839 fM. Such double-enhanced SERS nanosensors are further employed to simultaneously detect the three types of prostate carcinoma-related genes with high sensitivity and specificity, which meanwhile exhibit robust capacity of resisting disturbance in practical samples. Simultaneous and multiplexed detection of cancer-related genes may provide further biomedical applications with new opportunity.

Aptamer Display on Diverse DNA Polyhedron Supports

DNA aptamers are important tools for molecular recognition, particularly for a new generation of tools for biomedicine based on nucleic acid nanostructures. Here, we investigated the relative abilities of different shapes and sizes of DNA polyhedra to display an aptamer which binds to the malaria biomarker Plasmodium falciparum lactate dehydrogenase (PfLDH). The aptamer was shown to perform an Aptamer-Tethered Enzyme Capture (APTEC) assay with the hypothesis that the display of the aptamer above the surface through the use of a polyhedron may lead to better sensitivity than use of the aptamer alone. We compared different numbers of points of contact, different shapes, including tetrahedron, square, and pentagon-based pyramids, as well as prisms. We also investigated the optimal height of display of the structure. Our results demonstrated that the display of an aptamer on an optimized nanostructure improved sensitivity up to 6-fold relative to the aptamer alone in the APTEC assay. Other important factors included multiple basal points of contact with the surface, a tetrahedron proved superior to the more complex shaped structures, and height above the surface only made minor differences to efficacy. The display of an aptamer on a nanostructure may be beneficial for higher sensitivity aptamer-mediated malaria diagnosis. Aptamer displays using DNA nanostructure polyhedron supports could be a useful approach in a variety of applications.

Biomacromolecular nanostructures-based interfacial engineering: from precise assembly to precision biosensing

Biosensors are a type of important biodevice that integrate biological recognition elements, such as enzyme, antibody and DNA, and physical or chemical transducers, which have revolutionized clinical diagnosis especially under the context of point-of-care tests. Since the performance of a biosensor depends largely on the bio–solid interface, design and engineering of the interface play a pivotal role in developing quality biosensors. Along this line, a number of strategies have been developed to improve the homogeneity of the interface or the precision in regulating the interactions between biomolecules and the interface. Especially, intense efforts have been devoted to controlling the surface chemistry, orientation of immobilization, molecular conformation and packing density of surface-confined biomolecular probes (proteins and nucleic acids). By finely tuning these surface properties, through either gene manipulation or self-assembly, one may reduce the heterogeneity of self-assembled monolayers, increase the accessibility of target molecules and decrease the binding energy barrier to realize high sensitivity and specificity. In this review, we summarize recent progress in interfacial engineering of biosensors with particular focus on the use of protein and DNA nanostructures. These biomacromolecular nanostructures with atomistic precision lead to highly regulated interfacial assemblies at the nanoscale. We further describe the potential use of the high-performance biosensors for precision diagnostics.

PCR-Free Colorimetric DNA Hybridization Detection Using a 3D DNA Nanostructured Reporter Probe

A "sandwich-like" biosensor was developed on the basis of the magnetic bead platform for sensitive detection of breast cancer 1 (BRCA1) DNA. In the present study, a tetrahedron-structured reporter probe (TSRP) was designed, in which 3 vertices of the tetrahedron were labeled with digoxin (Dig), and the other one was labeled with a detection probe. TSRP here provided accurate enzyme loading and well-organized spatial arrangement for optimized signal amplification. The detection limit of this biosensor was as low as 10 fM, which is at least 4 orders of magnitude lower than that of the single DNA probe (100 pM), and the signal gain was 2 times higher than the analysis using three one-dimensional (1D) reporter probes. We could distinguish DNA sequences with only 1 base mismatch, and the performance of our TSRP biosensor was proven to be equally good in both PCR products and real fetal calf serum (FCS) sample as in buffer. We believe this work provided a novel avenue for the development of signal amplification strategies.

Carbon Dots/g-C3N4 Nanoheterostructures-Based Signal-Generation Tags for Photoelectrochemical Immunoassay of Cancer Biomarkers Coupling with Copper Nanoclusters

A class of 0-dimensional/2-dimensional (0D/2D) nanoheterostructures based on carbon quantum dots (CQDs) and graphitic carbon nitride (g-C₃N₄) was designed as the signal-generation tags for the sensitive photoelectrochemical (PEC) immunoassay of prostate-specific antigen (PSA) coupling with the copper nanoclusters (CuNCs). Combination of CQDs with g-C₃N₄ promoted the photoexcited electron/hole separation and largely increased the photocurrents of the nanoheterostructures. Initially, a sandwich-type immunoreaction was carried out on monoclonal anti-PSA antibody-coated microplate by using PSA aptamer linked with CuNCs as the tracer. Accompanying the immunocomplex, the carried CuNCs were dissolved under acidic conditions. The as-released copper ions from the CuNCs could be captured onto the CQDs/g-C₃N₄ nanoheterostructures via the amino-group on the CQD surface as well as the -NH_x (x = 1, 2, 3) of g-C₃N₄ nanosheets. The strong coordination of the Lewis basic sites on the CQDs/g-C₃N₄ with Cu²⁺ decreased the photocurrent of the nanoheterostructures. Under optimal conditions, CQDs/g-C₃N₄ nanoheterostructures displayed good photocurrent responses for the detection of PSA within the dynamic linear range of 0.02-100 ng mL^-1 and a limit of detection (LOD) of 5.0 pg mL^-1. This method was also evaluated for quantitative screening of human PSA serum specimens by using the referenced electrochemiluminescent enzyme-linked immunoassay (ECL-ELIA) and gave good matched results between two methods. Additionally, this system was beneficial to explore the charge-separation and photoinduced electron transfer mechanism in the photoelectrochemical sensing protocols.

Hand-in-hand RNA nanowire-based aptasensor for the detection of theophylline

Theophylline is a popular drug for many respiratory diseases. However, certain toxic side effects may be developed and the narrow safety range raises the demand for sensitive methods to constantly monitor theophylline levels. This study presents an electrochemical approach towards theophylline detection based on the recognition by split RNA aptamers. Target induced construction of hand-in-hand RNA nanowire on the electrode surface could further absorb silver nanoparticles (Ag NPs) as electrochemical species. When theophylline is not present, RNA probes are stable and their conformations remain unchanged. In contrast, theophylline is able to trigger the hairpin opening of RNA probe and subsequent self-assembly of RNA nanowire, which could be captured by DNA tetrahedron on the electrode interface. After further decorating Ag NPs on the nanowire, silver stripping current is measured to reveal initial theophylline concentration. The developed sensing strategy shows excellent specificity and sensitivity with the limit of detection of 50nM. Its practical utility is demonstrated by quantitative determination of theophylline levels in complex biological samples.

DNA Tetrahedral Nanostructure-Based Electrochemical miRNA Biosensor for Simultaneous Detection of Multiple miRNAs in Pancreatic Carcinoma

Specific and sensitive biomarker detection is essential to early cancer diagnosis. In this study, we demonstrate an ultrasensitive electrochemical biosensor with the ability to detect multiple pancreatic carcinoma (PC)-related microRNA biomarkers. By employing DNA tetrahedral nanostructure capture probes to enhance the detection sensitivity as well as a disposable 16-channel screen-printed gold electrode (SPGE) detection platform to enhance the detection efficiency, we were able to simultaneously detect four PC-related miRNAs: miRNA21, miRNA155, miRNA196a, and miRNA210. The detection sensitivity reached to as low as 10 fM. We then profiled the serum levels of the four miRNAs for PC patients and healthy individuals with our multiplexing electrochemical biosensor. Through the combined analyses of the four miRNAs, our results showed that PC patients could be discriminated from healthy controls with fairly high sensitivity. This multiplexing PCR-free miRNA detection sensor shows promising applications in early diagnosis of PC disease.

A CD44-biosensor for evaluating metastatic potential of breast cancer cells based on quartz crystal microbalance

A sensitive CD44-biosensor based on quartz crystal microbalance (QCM) was proposed for evaluating metastatic potential of breast cancer cells by using hyaluronan (HA) functionalized substrate film, polydopamine and polyethyleneimine composite film, for the purpose of capturing CD44-positive cancer cells through specific binding of HA to CD44. Two differently CD44-expressed breast cancer cell lines (MDA-MB-231 cells and MCF-7 cells) were put to use as targets for quantitative analysis as well as evaluation of metastatic potential of the cells. The limit of detection for MDA-MB-231 (M231) cells and MCF-7 cells were 300 and 1,000cellsmL^-1, respectively. The expression level of CD44 on M231 cells exhibited two times higher than that of MCF-7 cells, indicating of a higher metastatic potential. Moreover, poly-L-lysine modified QCM sensor was applied to monitor the stiffness of breast cancer cells that can reflect metastatic potential of cells. The results revealed that the MCF-7 cells were stiffer than M231 cells, implying that the M231 cells possessed higher metastatic potential. The proposed protocol is simple and rapid to evaluate the metastatic potential of cancer cells, in addition to offering a promising diagnostic tool for metastatic cancer.

Cavity-Type DNA Origami-Based Plasmonic Nanostructures for Raman Enhancement

DNA origami has been established as addressable templates for site-specific anchoring of gold nanoparticles (AuNPs). Given that AuNPs are assembled by charged DNA oligonucleotides, it is important to reduce the charge repulsion between AuNPs-DNA and the template to realize high yields. Herein, we developed a cavity-type DNA origami as templates to organize 30 nm AuNPs, which formed dimer and tetramer plasmonic nanostructures. Transmission electron microscopy images showed that high yields of dimer and tetramer plasmonic nanostructures were obtained by using the cavity-type DNA origami as the template. More importantly, we observed significant Raman signal enhancement from molecules covalently attached to the plasmonic nanostructures, which provides a new way to high-sensitivity Raman sensing.

Submolecular Structure and Orientation of Oligonucleotide Duplexes Tethered to Gold Electrodes Probed by Infrared Reflection Absorption Spectroscopy: Effect of the Electrode Potentials

Unique electronic and ligand recognition properties of the DNA double helix provide basis for DNA applications in biomolecular electronic and biosensor devices. However, the relation between the structure of DNA at electrified interfaces and its electronic properties is still not well understood. Here, potential-driven changes in the submolecular structure of DNA double helices composed of either adenine-thymine (dAdT)₂₅ or cytosine-guanine (dGdC)₂₀ base pairs tethered to the gold electrodes are for the first time analyzed by in situ polarization modulation infrared reflection absorption spectroscopy (PM IRRAS) performed under the electrochemical control. It is shown that the conformation of the DNA duplexes tethered to gold electrodes via the C₆ alkanethiol linker strongly depends on the nucleic acid sequence composition. The tilt of purine and pyrimidine rings of the complementary base pairs (dAdT and dGdC) depends on the potential applied to the electrode. By contrast, neither the conformation nor orientation of the ionic in character phosphate-sugar backbone is affected by the electrode potentials. At potentials more positive than the potential of zero charge (pzc), a gradual tilting of the double helix is observed. In this tilted orientation, the planes of the complementary purine and pyrimidine rings lie ideally parallel to each other. These potentials do not affect the integral stability of the DNA double helix at the charged interface. At potentials more negative than the pzc, DNA helices adopt a vertical to the gold surface orientation. Tilt of the purine and pyrimidine rings depends on the composition of the double helix. In monolayers composed of (dAdT)₂₅ molecules the rings of the complementary base pairs lie parallel to each other. By contrast, the tilt of purine and pyrimidine rings in (dGdC)₂₀ helices depends on the potential applied to the electrode. Such potential-induced mobility of the complementary base pairs can destabilize the helix structure at a submolecular level. These pioneer results on the potential-driven changes in the submolecular structure of double stranded DNA adsorbed on conductive supports contribute to further understanding of the potential-driven sequence-specific electronic properties of surface-tethered oligonucleotides.

DNA Polymerase-Directed Hairpin Assembly for Targeted Drug Delivery and Amplified Biosensing

Due to the predictable conformation and programmable Watson-Crick base-pairing interactions, DNA has proven to be an attractive material to construct various nanostructures. Herein, we demonstrate a simple model of DNA polymerase-directed hairpin assembly (PDHA) to construct DNA nanoassemblies for versatile applications in biomedicine and biosensing. The system consists of only two hairpins, an initiator and a DNA polymerase. Upon addition of aptamer-linked initiator, the inert stems of the two hairpins are activated alternately under the direction of DNA polymerase, which thus grows into aptamer-tethered DNA nanoassemblies (AptNAs). Moreover, through incorporating fluorophores and drug-loading sites into the AptNAs, we have constructed multifunctional DNA nanoassemblies for targeted cancer therapy with high drug payloads and good biocompatibility. Interestingly, using the as-prepared AptNAs as building blocks, DNA nanohydrogels are self-assembled after centrifugation driven by liquid crystallization and dense packaging of DNA duplexes. Taking advantage of easy preparation and high loading capacity, the PDHAs are readily extended to the fabrication of a label-free biosensing platform, achieving amplified electrochemical detection of microRNA-21 (miR-21) with a detection limit as low as 0.75 fM and a dynamic range of 8 orders of magnitude. This biosensor also demonstrates excellent specificity to discriminate the target miR-21 from the control microRNAs and even the one-base mismatched one and further performs well in analyzing miR-21 in MCF-7 tumor cells.