Tailoring Au-Ag-S composite microstructures in one-pot for both SERS detection and photocatalytic degradation of plasticizers DEHA and DEHP

Point-of-Use SERS Approach for Efficient Determination and Removal of Phthalic Acid Esters Based on a Metal-Organic Framework-Coated Melamine Sponge

Phthalic acid esters (PAEs) are ubiquitous environmental contaminants, and their real-time monitoring and removal remain challenging. Herein, a point-of-use (POU) device integrating adsorption, surface-enhanced Raman spectroscopy (SERS), and removal strategy was developed and realized ultrafast on-site determination of PAEs and cleanup of them from water. A piece of flexible melamine sponge (MS) was coated with gold nanostars (AuNSs) and metal-organic frameworks (MOFs), thus obtaining SERS activity and adsorption capacity. Based on this multifunctional AuNSs@MOFs/MS composite, clear trends were observed between SERS signal intensity and concentration of di(2-ethylhexyl)phthalate (DEHP) and dibutyl phthalate (DBP). The method detection limits of DEHP and DBP were calculated to be 0.75 × 10-7 and 0.67 × 10-7 M in water, respectively, proving good sensitivity. Furthermore, this POU device exhibited satisfactory adsorption capacity (∼82.3 g/g for DBP and ∼90.0 g/g for DEHP), high adsorption efficiency (equilibrium in 100 s), and good regeneration capability (removal efficiency >70% after 5 cycles). The applicability of this device was verified by its good determination and removal performance in real environmental water matrices. The whole process could be completed within 5 min. This approach provides a new POU alternative for real-time monitoring and removal of PAEs in water.

Crosstalk between aryl hydrocarbon receptor and Wnt/β-catenin signaling pathway: Possible culprit of di (2-ethylhexyl) phthalate-mediated cardiotoxicity in zebrafish larvae

Typical plasticizer di (2-ethylhexyl) phthalate (DEHP) has been demonstrated to induce cardiotoxicity in zebrafish, but the potential molecular mechanisms involved have not been fully elucidated. Aryl hydrocarbon receptor (AhR), an essential protein for inducing developmental abnormalities, has been demonstrated to be activated by DEHP in other species, but whether the AhR signaling pathway also contributes to DEHP-mediated cardiac developmental toxicity in zebrafish remains unclear. Firstly, molecular docking simulations initially confirmed the possibility that DEHP has AhR agonistic activity. To further confirm this conjecture, this work analyzed the changes of cardiac-related indexes in zebrafish stressed by DEHP at individual, protein, and gene levels. The results showed that DEHP mediated cardiac phenotypic developmental defects, increased CYP1A1 activity, and oxidative stress as well as significant changes in the expression levels of key proteins and genes of AhR, Wnt/β-catenin, and Nrf2-Keap1 signaling pathways. Notably, the addition of AhR inhibitors effectively alleviated the above negative effects, indicating that the AhR signaling pathway and its crosstalk with the Wnt/β-catenin signaling pathway is an essential pathway for DEHP-mediated cardiac developmental toxicity. Overall, this work enriches the molecular mechanism of DEHP-mediated cardiac developmental defects in zebrafish and provides a reliable biomarker for future environmental risk assessment of DEHP.

A review on solution- and vapor-responsive sensors for the detection of phthalates

Phthalic acid esters, largely referred to as phthalates, are today acknowledged as important pollutants used in the manufacture of polyvinyl chloride (PVC)-based plastics, whose use extends to almost every aspect of modern life. The risk of exposure to phthalates is particularly relevant as high concentrations are regularly found in drinking water, food-contact materials and medical devices, motivating an immense body of research devoted to methods for their detection in liquid samples. Conversely, phthalate vapors have only recently been acknowledged as potentially important atmospheric pollutants and as early fire indicators; additionally, deposition of these vapors can pose significant problems to the proper functioning of spacecraft and diverse on-board devices, leading to major space agencies recognizing the need of developing vapor-responsive phthalate sensors. In this manuscript we present a literature survey on solution- and vapor-responsive sensors and analytical assays for the detection of phthalates, providing a detailed analysis of a vast array of analytical data to offer a clear idea on the analytical performance (limits of detection and quantification, linear range) and advantages provided by each class of sensor covered in this review (electrochemical, optical and vapor-responsive) in the context of their potential real-life applications; the manuscript also gives detailed fundamental information on the various physicochemical responses exploited by these sensors and assays that could potentially be harnessed by new researchers entering the field.

Raman Spectroscopic Study of Five Typical Plasticizers Based on DFT and HF Theoretical Calculation

Phthalic acid esters (PAEs) are the most commonly used plasticizers, and long-term or high levels of exposure to PAEs have a huge potential risk to human health. In this study, the theories of Hartree-Fock (HF) and density functional theory (DFT) with different hybrid methods and basis sets were used to calculate the theoretical Raman spectra of five PAEs, and the comparison of calculated spectra between different theories, hybrid methods, and basis sets was conducted to determine the suitable theory with hybrid method and basis set for PAEs. Also, the Raman vibrations were assigned to the Raman peaks of PAEs according to the theoretical and experimental Raman spectra. The results indicate that DFT is more suitable for the theoretical study of PAEs than HF. In DFT, the hybrid method of B3LYP is more applicable to the theoretical study of PAEs than B3PW91, and the basis set of 6-311G(d, p) obtains the most consistent theoretical Raman spectra with the experimental spectra for PAEs. This study finds the optimal combination of the theoretical method and basis set for PAEs, and it will contribute to the establishment of the Raman fingerprint and the development of rapid detection for PAEs in the future.

Metal-Organic Framework (MOF) Derivatives as Promising Chemiresistive Gas Sensing Materials: A Review

The emission of harmful gases has seriously exceeded relative standards with the rapid development of modern industry, which has shown various negative impacts on human health and the natural environment. Recently, metal-organic frameworks (MOFs)-based materials have been widely used as chemiresistive gas sensing materials for the sensitive detection and monitoring of harmful gases such as NO_x, H₂S, and many volatile organic compounds (VOCs). In particular, the derivatives of MOFs, which are usually semiconducting metal oxides and oxide-carbon composites, hold great potential to prompt the surface reactions with analytes and thus output amplified resistance changing signals of the chemiresistors, due to their high specific surface areas, versatile structural tunability, diversified surface architectures, as well as their superior selectivity. In this review, we introduce the recent progress in applying sophisticated MOFs-derived materials for chemiresistive gas sensors, with specific emphasis placed on the synthesis and structural regulation of the MOF derivatives, and the promoted surface reaction mechanisms between MOF derivatives and gas analytes. Furthermore, the practical application of MOF derivatives for chemiresistive sensing of NO₂, H₂S, and typical VOCs (e.g., acetone and ethanol) has been discussed in detail.

Core-satellite-satellite hierarchical nanostructures: assembly, plasmon coupling, and gap-selective surface-enhanced Raman scattering

The plasmonic properties of gold nanoparticles (AuNPs), such as color tunability, electric field generation, hot carrier generation, and localized heating, are significantly enhanced in the nanogaps between AuNPs. Therefore, the creation and control of nanogaps are key to developing advanced plasmonic nanomaterials. Most AuNP nanoassemblies, including dimers, trimers, and core-satellites, have a single type of nanogap within the assembly. In this study, we construct core-satellite-satellite (CSS) hierarchical, fractal-like nanostructures featuring two types of nanogaps, namely first generation nanogaps (Gap1) between the core and first satellite (Sat1) AuNPs and second generation nanogaps (Gap2) between Sat1 and second satellite (Sat2) AuNPs. The sequential and alternating immersion of glass slides in different-sized AuNPs and linkers forms CSS with perfect yield. The UV-vis spectroscopy, combined with charge density distribution calculations, reveals the nature of the plasmon coupling between the AuNPs that constitute CSS nanoassemblies. The plasmon coupling can be tuned by independently varying Gap1 and Gap2. Furthermore, we explore the electric field amplification in Gap1 and Gap2 by comparing the surface-enhanced Raman scattering signal intensity selectively from each nanogap. This new type of nanostructure provides a great flexibility to control and enhance the plasmonic properties of noble metal nanoparticles.

Metal–Organic-Framework-Derived Ball-Flower-like Porous Co3O4/Fe2O3 Heterostructure with Enhanced Visible-Light-Driven Photocatalytic Activity

A porous ball-flower-like Co₃O₄/Fe₂O₃ heterostructural photocatalyst was synthesized via a facile metal–organic-framework-templated method, and showed an excellent degradation performance in the model molecule rhodamine B under visible light irradiation. This enhanced photocatalytic activity can be attributed to abundant photo-generated holes and hydroxyl radicals, and the combined effects involving a porous structure, strong visible-light absorption, and improved interfacial charge separation. It is notable that the ecotoxicity of the treated reaction solution was also evaluated, confirming that an as-synthesized Co₃O₄/Fe₂O₃ catalyst could afford the sunlight-driven long-term recyclable degradation of dye-contaminated wastewater into non-toxic and colorless wastewater.

Electrokinetic Preseparation and Molecularly Imprinted Trapping for Highly Selective SERS Detection of Charged Phthalate Plasticizers

Nonspecific binding and weak spectral discernment are the main challenges for surface-enhanced Raman scattering (SERS) detection, especially in real sample analysis. Herein, molecularly imprinted polymer (MIP)-based core-shell AuNP@polydopamine (AuNP@PDA-MIP) nanoparticles (NPs) are designed and immobilized on an electrochemically reduced MoS₂-modified screen-printed electrode (SPE). This portable electrochemical-Raman interface offers the dual functions of electrokinetic preseparation (EP) and MIP trapping of charged molecules so that a reliable SERS recognition with molecular selectivity and high sensitivity can be achieved. Core-shell AuNP@PDA-MIP NPs can be controllably synthesized, possess predesigned specific recognition, and provide "hot spots" at the junction of NPs. The introduction of an electric field enables the autonomous exclusion and separation of similarly charged molecules as well as attraction and concentration of the oppositely charged molecules by electrostatic attraction. Subsequently, the specific MIP recognition cavities allow selective adsorption of targets on the interface without the interference of analogues. Owing to the distinctive design of the multiple coupling separation, trapping, and enrichment strategies, the MIP-based SERS-active interface can be used for label-free detection of charged molecules in real samples without pretreatment. As a proof-of-concept study, label-free SERS detection of charged phthalate plasticizers (PAEs) was demonstrated with a detection limit as low as 2.7 × 10^-12 M for dimethyl phthalate (DMP) and 2.3 × 10^-11 M for di(2-ethylhexyl) phthalate (DEHP). This sensing strategy for in situ SERS analysis of charged pollutants or toxins holds vast promises for a wide range of in-field applications.

Engineering one-dimensional trough-like Au-Ag2S nano-hybrids for plasmon-enhanced photoelectrodetection of human α-thrombin

One-dimensional (1D) morphology-unique Au-Ag₂S nano-hybrids are achieved by combining the interfacial self-assembly of Ag nanowires, interface-oriented site-specific etching of Ag nanowires with AuCl₄^-, and the sulfurization of S^2-. The as-formed Au-Ag₂S nano-hybrid has a trough-like morphology. The wall of the Au-Ag₂S nanotrough is a Ag₂S/Au/Ag₂S trilayer wall, but the Ag₂S layer is a Ag₂S-rich mixture of Ag₂S and Au rather than pure Ag₂S because of the diffusion of Au atoms towards Ag₂S. The Au-Ag₂S nanotrough shows strong absorption in the visible region (400-800 nm) and exhibits a favorable photoelectrochemical (PEC) response, the photocurrent of which is ∼8.5 times larger than that of pure Ag₂S. This enhanced PEC response originates from the localized plasmonic resonance effect of Au. Moreover, the PEC biosensor based on the Au-Ag₂S nanotroughs shows high sensitivity and selectivity, satisfactory reproducibility, and good stability towards human α-thrombin (TB) detection: a sensitive linear response ranging from 1.00 to 10.00 pmol L^-1 and a low detection limit of 0.67 pmol L^-1. This study provides a new model for studying the PEC behavior of plasmonic metal/semiconductor materials, and this Au-Ag₂S nanotrough may also be useful in the fields of photocatalysis and photovoltaics.

Tunable Silver Nanoparticle Arrays by Hot Embossing and Sputter Deposition for Surface-Enhanced Raman Scattering

Surface-enhanced Raman scattering (SERS) spectroscopy has attracted a lot of attention over the past 30 years. Due to its extreme sensitivity and label-free detection capability, it has shown great potential in areas such as analytical chemistry, biochemistry, and environmental science. However, the major challenge is to manufacture large-scale highly SERS active substrates with high controllability, good reproducibility, and low cost. In this study, we report a novel method to fabricate uniform silver nanoparticle arrays with tunable particle sizes and interparticle gaps. Using hot embossing and sputtering techniques, we were able to batch produce the silver nanoparticle arrays SERS active substrate with consistent quality and low cost. We showed that the proposed SERS active substrate has good uniformity and high reproducibility. Experimental results show that the SERS enhancement factor is affected by silver nanoparticles size and interparticle gaps. Furthermore, the enhancement factor of the SERS signal obtained from Rhodamine 6G (R6G) probe molecules was as high as 1.12 × 107. Therefore, the developed method is very promising for use in many SERS applications.

Self-assembled two-dimensional gold nanoparticle film for sensitive nontargeted analysis of food additives with surface-enhanced Raman spectroscopy

CTAB-functionalized Au NP film as SERS active substrate prepared by the evaporation-driven self-assembly strategy demonstrated high sensitivity and reproducibility for the detection of different food additives.

Hydrothermal Cation Exchange Enabled Gradual Evolution of Au@ZnS-AgAuS Yolk-Shell Nanocrystals and Their Visible Light Photocatalytic Applications

Yolk-shell hybrid nanoparticles with noble metal core and programmed semiconductor shell composition may exhibit synergistic effects and tunable catalytic properties. In this work, the hydrothermal cation exchange synthesis of Au@ZnS-AgAuS yolk-shell nanocrystals (Y-S NCs) with well-fabricated void size, grain-boundary-architectured ZnS-AgAuS shell and in situ generated Au cocatalyst are demonstrated. Starting from the novel cavity-free Au@AgAuS core-shell NCs, via aqueous cation exchange reaction with Zn2+, the gradual evolution with produced Au@ZnS-AgAuS Y-S NCs can be achieved successfully. This unprecedented evolution can be reasonably explained by cation exchange initialized chemical etching of Au core, followed by the diffusion through the shell to be AgAuS and then ZnS. By hydrothermal treatment provided optimal redox environment, Au ions in shell were partially reduced to be Au NCs on the surface. The UV-vis absorption spectra evolution and visible light photocatalytic performances, including improved photodegradation behavior and photocatalytic hydrogen evolution activity, have demonstrated their potential applications. This new one-pot way to get diverse heterointerfaces for better photoinduced electron/hole separation synergistically can be anticipated for more kinds of photocatalytic organic synthesis.

Facile and Large-Area Preparation of Porous Ag3PO4 Photoanodes for Enhanced Photoelectrochemical Water Oxidation

Photoelectrochemical (PEC) water splitting is a promising approach for renewable energy, where the development of efficient photoelectrodes, especially photoanodes for water oxidation is still challenging. In this paper, we report the novel solution-processed microcrystalline Ag₃PO₄ photoanodes with tunable porosity depending on the reaction time. These porous Ag₃PO₄ films were grown on large-area (4.5 × 4.5 cm²) silver substrates via an air-exposed and room-temperature immersion reaction. Enhanced light absorption abilities were exhibited by the synthesized Ag₃PO₄ films with optimized porosity resulted from prolonged reaction times (≥20 h), due to which appreciable water splitting performance was demonstrated when they were utilized as photoanodes. Particularly, the highly porous 20 h Ag₃PO₄ photoanode presented a photocurrent density of around 4.32 mA/cm², which is nearly three times higher than that of the nonporous 1 h Ag₃PO₄ photoanode (1.48 mA/cm²) at 1 V vs Ag/AgCl. Moreover, superior stability of the 20 h Ag₃PO₄ photoanode has also been confirmed by the 5 h successive PEC water splitting experiment. Therefore, both the scalable and facile fabrication method, and considerable photoactivity and stability of these Ag₃PO₄ photoanodes together suggest their great potential for efficient solar-to-fuel energy conversion and other PEC applications.

Ultrafast self-assembly of silver nanostructures on carbon-coated copper grids for surface-enhanced Raman scattering detection of trace melamine

Structurally well-defined assemblies of silver nanoparticles, including the dendritic nano-flowers (NFs), planar nano-spheres (NSs) and nano-dendrites (NDs) were obtained by a surfactant-free and ultrafast (≈15min) self-assembly process on as-purchased carbon-coated copper TEM grids. The silver nano-assemblies, especially the NFs modified TEM grids, when serving as surface-enhanced Raman spectroscopy (SERS) substrates for detecting melamine molecules, demonstrated a long-lived limit of detection (LOD) of as low as 10^-11M, suggesting the potential of these silver-assemblies modified carbon-coated copper grids as novel potable and cost-effective SERS substrates for trace detection toward various food contaminants like melamine.

Three-Dimensional Clustered Nanostructures for Microfluidic Surface-Enhanced Raman Detection

A materials fabrication concept based on a fluid-construction strategy to create three-dimensional (3D) ZnO@ZnS-Ag active nanostructures at arbitrary position within confined microchannels to form an integrated microfluidic surface-enhanced Raman spectroscopy (SERS) system is presented. The fluid-construction process allowed facile construction of the nanostructured substrates, which were shown to possess a substantial number of integrated hot spots that support SERS activity. Finite-difference time-domain (FDTD) analysis suggested that the 3D clustered geometry facilitated hot spot formation. High sensitivity and good recycle performance were demonstrated using 4-mercaptobenzoic acid (4-MBA) and a mixture of Rhodamine 6G (R6G) and 4-MBA as target organic pollutants to evaluate the SERS microfluidic device performance. The 3D clustered nanostructures were also effective in the detection of a representative nerve agent and biomolecule. The results of this investigation provide a materials and process approach to the fabrication of requisite nanostructures for the online detection of organic pollutants, devices for real-time observation of environmental hazards, and personal-health monitoring.

Intense Raman scattering on hybrid Au/Ag nanoplatforms for the distinction of MMP-9-digested collagen type-I fiber detection

Well-ordered Au-nanorod arrays were fabricated using the focused ion beam method (denoted as fibAu_NR). Au or Ag nanoclusters (NCs) of various sizes and dimensions were then deposited on the fibAu_NR arrays using electron beam deposition to improve the surface-enhanced Raman scattering (SERS) effect, which was verified using a low concentration of crystal violet (10(-)(5)M) as the probe molecule. An enhancement factor of 6.92 × 10(8) was obtained for NCsfibAu_NR, which is attributed to the combination of intra-NC and NR localized surface plasmon resonance. When 4-aminobenzenethiol (4-ABT)-coated Au or Ag nanoparticles (NPs) were attached to NCsfibAu_NR, the small gaps between 4-ABT-coated NPs and intra-NCs allowed detection at the single-molecule level. Hotspots formed at the interfaces of NCs/NRs and NPs/NCs at a high density, producing a strong local electromagnetic effect. Raman spectra from as-prepared type I collagen (Col-I) and Ag-NP-coated Col-I fibers on NCsfibAu_NR were compared to determine the quantity of amino acids in their triple helix structure. Various concentrations of matrix-metalloproteinase-9-digested Col-I fibers on NCsfibAu_NR were qualitatively examined at a Raman laser wavelength of 785nm to determine the changes of amino acids in the Col-I fiber structure. The results can be used to monitor the growth of healing Col-I fibers in a micro-environment.

Porous Au-Ag Alloy Particles Inlaid AgCl Membranes As Versatile Plasmonic Catalytic Interfaces with Simultaneous, in Situ SERS Monitoring

We present a novel porous Au-Ag alloy particles inlaid AgCl membrane as plasmonic catalytic interfaces with real-time, in situ surface-enhanced Raman spectroscopy (SERS) monitoring. The Au-Ag alloy particles inlaid AgCl membranes were obtained via a facile two-step, air-exposed, and room-temperature immersion reaction with appropriate annealing process. Owing to the designed integration of semiconductor component AgCl and noble metal Au-Ag particles, both the catalytic reduction and visible-light-driven photocatalytic activities toward organic contaminants were attained. Specifically, the efficiencies of about 94% of 4-nitrophenol (4-NP, 5 × 10(-5) M) reduction after 8 min of reaction, and degradation of rhodamine 6G (R6G, 10(-5) M) after 12 min of visible light irradiation were demonstrated. Moreover, efficiencies of above 85% of conversion of 4-NP to 4-aminophenol (4-AP) and 90% of R6G degradation were achieved as well after 6 cycles of reactions, by which robust recyclability was confirmed. Further, with distinct SERS signals generated simultaneously from the surfaces of Au-Ag particles under laser excitation, in situ SERS monitoring of the process of catalytic reactions with superior sensitivity and linearity has been realized. Overall, the capability of the Au-Ag particles inlaid AgCl membranes to provide SERS monitored catalytic and visible-light-driven photocatalytic conversion of organic pollutants, along with their mild and cost-effective fabrication method, would make sense for in-depth understanding of the mechanisms of (photo)catalytic reactions, and also future development of potable, multifunctional and integrated catalytic and sensing devices.

Insights into size-dominant magnetic microwave absorption properties of CoNi microflowers via off-axis electron holography

In this study, CoNi flower-like hierarchical microstructures with different sizes were obtained via a one-step solvothermal method by simply adjusting the concentration of precursors and surfactant. The obtained CoNi microflowers possess uniform and tunable size, good monodispersity, and remarkable magnetic microwave absorption properties as well as electron holography phase images. Characterization results have demonstrated the dependency of properties of CoNi microflowers on their morphologies and sizes. The microflowers exhibit different stray magnetic fields that might be determined by whether the pristine nanoflakes on the flowers' surface was parallel or perpendicular to grid plane. And as the size of microflowers increased, the coercive force (Hc) value decreased while saturation magnetization (Ms) value gradually increased, and it can be also observed that the values of Ms and Hc at 5 K are higher than those at 300 K. In addition, the blocking temperature decreased when size increased. Typically, the 2.5 μm CoNi microflowers achieve the maximum reflection loss (RL) value of -28.5 dB at 6.8 GHz with a thickness of 2 mm, while on the other hand, the 0.6 μm flowers achieved a broader absorption bandwidth below -10 dB of 6.5 GHz. Therefore, it is believable that the CoNi flowers with different sizes and hierarchical structures in this work have great potential for high performance magnetic microwave absorption applications.