Optical and conductive properties of as-synthesized organic-capped TiO₂ nanorods highly dispersible in polystyrene-block-poly(methyl methacrylate) diblock copolymer

Experimental and Prediction Study of Displacement-Rate Effects on Flexural Behaviour in Nano and Micro TiO2 Particles-Epoxy Resin Composites

Epoxy resin composites with different weight fractions of TiO₂ microparticles (1%, 5%, 10%, 15%, 20%) and of TiO₂ nanoparticles (0.5%, 1%, 2%, 3%) were prepared. The particle size of the nanoparticles was averaged around 21 nm while the particle size of the micro TiO₂ particles was averaged around 0.2 μm. The morphology of the manufactured particulate composites was studied by means of scanning electron microscopy (SEM). The mechanical properties of both nanocomposites (21 nm) and microcomposites (0.2 μm) were investigated and compared through flexural testing. Furthermore, the effect of displacement-rate on the viscoelastic behavior of composite materials was investigated. The flexural tests were carried out at different filler weight fractions and different displacement-rates (0.5, 5, 10, 50 mm/min). The influence of TiO₂ micro- and nanoparticles on the mechanical response of the manufactured composites was studied. For micro TiO₂ composites, a maximum increase in flexural modulus on the order of 23% was achieved, while, in the nanocomposites, plastification of the epoxy matrix due to the presence of TiO₂ nanoparticles was observed. Both behaviors were predicted by the Property Prediction Model (PPM), and a fair agreement between experimental results and theoretical predictions was observed.

Improvement of Mechanical Properties and Self-Healing Efficiency by Ex-Situ Incorporation of TiO2 Nanoparticles to a Waterborne Poly(Urethane-Urea)

This research work was focused on the incorporation of TiO₂ nanoparticles into synthesized solvent-free waterborne poly(urethane-urea) (WPUU) based on hydrophilic poly(ethylene oxide) (PU0) in order to improve both the mechanical properties and self-healing effectiveness of a polymer matrix. The incorporation of TiO₂ nanoparticles resulted in a successful enhancement of the mechanical properties of nanocomposite films when compared to PU0. Simultaneously, the obtained nanocomposite films did not only maintain the self-healing ability of the PU0 film, measured by means of mechanical properties after successive cutting/recovery cycles, but they also showed a higher self-healing efficiency than the PU0 film. Moreover, the well-dispersed TiO₂ nanoparticles, visualized by atomic force microscopy (AFM), kept their conductive properties when embedded in the PU0 matrix, as was confirmed by electrostatic force microscopy (EFM). This research work described a simple and industrially appealing way to control the dispersion of commercially available TiO₂ nanoparticles in waterborne poly(urethane-urea) for the designing of inorganic/organic hybrid nanocomposites with enhanced mechanical properties and self-healing efficiency, in which TiO₂ nanoparticles preserved their conductive properties within the polymer matrix.

Glycated hemoglobin biosensing integration formed on Au nanoparticle-dotted tubular TiO2 nanoarray

Excessive glucose present in the blood of diabetic patients binds with the hemoglobin of red blood cells resulting in the formation of glycated hemoglobin (HbA_1c). Measurement of HbA_1c levels may help in identifying the efficacy of the ongoing treatment and hence provide a better control over the disease. In the present study, we have synthesized a sensitive and stable scaffold, which consists of Au nanoparticles (GNPs)-dotted tubular TiO₂, for the construction of an electrochemical HbA_1c biosensor. 12-phosphotungstic acid has been used as a reducer after depositing well-dispersed GNPs on TiO₂ nanotubes (TiO₂ NTs) and an electron mediator by accelerating the electron transfer between the conductor and protein. The fabricated electrode was characterized using scanning electron microscopy (SEM), cyclic voltammetry (CV), Fourier transform infrared spectroscopy (FTIR) and electrochemical impedance spectroscopic analysis (EIS). Biosensor exhibited low detection limit (0.5 μM), fast response time (3 s) and wide linearity (from 0.5 to 2000 μM). The working electrode was used 100 times over 4 months, when stored at 4 °C. The HbA1c biosensor was then effectively used to measure the % of HbA_1c in the blood of apparently healthy persons and diabetic patients.

Synthesis of Water-Based Dispersions of Polymer/TiO₂ Hybrid Nanospheres

We develop a strategy for preparing water-based dispersions of polymer/TiO₂ nanospheres that can be used to form composite materials applicable in various fields. The formed hybrid nanospheres are monodisperse and possess a hierarchical structure. It starts with the primary TiO₂ nanoparticles of about 5 nm, which first assemble to nanoclusters of about 30 nm and then are integrated into monomer droplets. After emulsion polymerization, one obtains the water-based dispersions of polymer/TiO₂ nanospheres. To achieve universal size, it is necessary to have treatments with intense turbulent shear generated in a microchannel device at different stages. In addition, a procedure combining synergistic actions of steric and anionic surfactants has been designed to warrant the colloidal stability of the process. Since the formed polymer/TiO₂ nanospheres are stable aqueous dispersions, they can be easily mixed with TiO₂-free polymeric nanoparticle dispersions to form new dispersions, where TiO₂-containing nanospheres are homogeneously distributed in the dispersions at the nanoscale, thus leading to various applications. As an example, the proposed strategy has been applied to generate polystyrene/TiO₂ nanospheres of about 100 nm in diameter.