Hierarchical core-shell structure of ZnO nanorod@NiO/MoO₂ composite nanosheet arrays for high-performance supercapacitors

Substrate-Enabled Room-Temperature Electrochemical Deposition of Crystalline ZnMnO3

Mixed transition metal oxides have emerged as promising electrode materials for electrochemical energy storage and conversion. To optimize the functional electrode properties, synthesis approaches allowing for a systematic tailoring of the materials' composition, crystal structure and morphology are urgently needed. Here we report on the room-temperature electrodeposition of a ternary oxide based on earth-abundant metals, specifically, the defective cubic spinel ZnMnO₃ . In this unprecedented approach, ZnO surfaces act as (i) electron source for the interfacial reduction of MnO₄ ^- in aqueous solution, (ii) as substrate for epitaxial growth of the deposit and (iii) as Zn precursor for the formation of ZnMnO₃ . Epitaxial growth of ZnMnO₃ on the lateral facets of ZnO nanowires assures effective electronic communication between the electroactive material and the conducting scaffold and gives rise to a pronounced 2-dimensional morphology of the electrodeposit forming - after partial delamination from the substrate - twisted nanosheets. The synthesis strategy shows promise for the direct growth of different mixed transition metal oxides as electroactive phase onto conductive substrates and thus for the fabrication of binder-free nanocomposite electrodes.

Liquid-Metal-Assisted Deposition and Patterning of Molybdenum Dioxide at Low Temperature

Molybdenum dioxide (MoO2), considering its near-metallic conductivity and surface plasmonic properties, is a great material for electronics, energy storage devices and biosensing. Yet to this day, room-temperature synthesis of large area MoO2, which allows deposition on arbitrary substrates, has remained a challenge. Due to their reactive interfaces and specific solubility conditions, gallium-based liquid metal alloys offer unique opportunities for synthesizing materials that can meet these challenges. Herein, a substrate-independent liquid metal-based method for the room temperature deposition and patterning of MoO2 is presented. By introducing a molybdate precursor to the surrounding of a eutectic gallium-indium alloy droplet, a uniform layer of hydrated molybdenum oxide (H2MoO3) is formed at the interface. This layer is then exfoliated and transferred onto a desired substrate. Utilizing the transferred H2MoO3 layer, a laser-writing technique is developed which selectively transforms this H2MoO3 into crystalline MoO2 and produces electrically conductive MoO2 patterns at room temperature. The electrical conductivity and plasmonic properties of the MoO2 are analyzed and demonstrated. The presented metal oxide room-temperature deposition and patterning method can find many applications in optoelectronics, sensing, and energy industries.

Energy storage electrochromic devices in the era of intelligent automation

The current intelligent automation society faces increasingly severe challenges in achieving efficient storage and utilization of energy. In the field of energy applications, various energy technologies need to be more intelligent and efficient to produce, store, transform and save energy. In addition, many smart electronic devices facing the future also require newer, lighter, thinner and even transparent multi-functional power supplies. The unique properties of electrochromic energy storage devices (ECESDs) have attracted widespread attention. In the field of energy applications, they have high potential value and competitiveness. This review focuses on the electrochromic basic principles, and the latest technological examples of ECESDs, which are related to materials and device structures. Simultaneously, this review makes a detailed comparison and summary of example performances. Moreover, the review compares the current mainstream energy storage devices: lithium batteries and supercapacitors, and the main challenges of ECESDs are discussed. Finally, the future development directions in the field of electrochromic energy storage are predicted.

Zeolitic imidazolate framework (ZIF)-derived porous carbon materials for supercapacitors: an overview

The present analysis focuses on the synthetic methods used for the application of supercapacitors with various mysterious architectures derived from zeolitic imidazolate frameworks (ZIFs). ZIFs represent an emerging and unique class of metal–organic frameworks with structures similar to conventional aluminosilicate zeolites, consisting of imidazolate linkers and metal ions. Their intrinsic porous properties, robust functionalities, and excellent thermal and chemical stabilities have resulted in a wide range of potential applications for various ZIF materials. In this rapidly expanding area, energetic research activities have emerged in the past few years, ranging from synthesis approaches to attractive applications of ZIFs. In this analysis, the development of high-performance supercapacitor electrodes and recent strategies to produce them, including the synthesis of various heterostructures and nanostructures, are analyzed and summarized. This analysis goes via the ingenuity of modern science when it comes to these nanoarchitecture electrodes. Despite these significant achievements, it is still difficult to accurately monitor the morphologies of materials derived from metal–organic frameworks (MOFs) because the induction force during structural transformations at elevated temperatures is in high demand. It is also desirable to achieve the direct synthesis of highly functionalized nanosized materials derived from zeolitic imidazolate frameworks (ZIFs) and the growth of nanoporous structures based on ZIFs encoded in specific substrates for the construction of active materials with a high surface area suitable for electrochemical applications. The latest improvements in this field of supercapacitors with materials formed from ZIFs as electrodes using ZIFs as templates or precursors are discussed in this review. Also, the possibility of usable materials derived from ZIFs for both existing and emerging energy storage technologies is discussed.

The present analysis focuses on the synthetic methods used for the application of supercapacitors with various mysterious architectures derived from zeolitic imidazolate frameworks (ZIFs).

Structural and Optical Characteristics of Highly UV-Blue Luminescent ZnNiO Nanoparticles Prepared by Sol-Gel Method

A simple single pot sol-gel method is used to prepare ZnNiO nanoparticles at assorted Ni doping levels, 1, 3, 7 and 10 wt.%. Structural and optical properties of nanoparticles are studied by X-ray diffraction (XRD), UV-visible diffuse reflection spectroscopy (DRS), photoluminescence (PL) measurements, scanning electron microscopy (SEM), μ-Raman and X-ray photoelectron-spectroscopy (XPS). A single substitutional solid solution phase is detected in the wurtzite ZnNiO nanoparticles at various doping levels. XRD peak splitting and shifting is ascribed to reduced wurtzite character and presence of crystalline strain in nanoparticles at higher level of Ni doping. The Kubelka-Munk function of DRS data reveals the presence of the Burstein-Moss effect in the optical absorption of ZnNiO nanoparticles. Photoluminescence studies show intense UV-blue emission from ZnNiO nanoparticles. The UV PL also exhibits the Burstein-Moss blue shift in the ZnNiO luminescence. Raman analyses also confirms the wurtzite structure of ZnNiO nanoparticles; however, crystal structural defects and bond stiffness increase with Ni doping. The optical and structural studies presented in this work are pointing towards a multivalent Ni substitution in the nanoparticles.

A unique core-shell structured ZnO/NiO heterojunction to improve the performance of supercapacitors produced using a chemical bath deposition approach

The integration of metal oxide composite nanostructures has attracted great attention in supercapacitor (SC) applications. Herein, we fabricated a series of metal oxide composite nanostructures, including ZnO nanowires, NiO nanosheets, ZnO/CuO nanowire arrays, ZnO/FeO nanocrystals, ZnO/NiO nanosheets and ZnO/PbO nanotubes, via a simple and cost-effective chemical bath deposition (CBD) method. The electrochemical properties of the produced SCs were examined by performing cyclic voltammetry (CV), galvanostatic charge-discharge (GCD) analysis, and electrochemical impedance spectroscopy (EIS). Of the different metal oxides and metal oxide composites tested, the unique surface morphology of the ZnO/NiO nanosheets most effectively increased the electron transfer rate and electrical conductivity, which resulted in improved energy storage properties. The binder-free ZnO/NiO electrode delivered a high specific capacitance/capacity of 1248 F g-1 (599 mA h g-1) at 8 mA cm-2 and long-term cycling stability over the course of 3000 cycles with a capacity retention of 79%. These results suggested a superiority in performance of the ZnO/NiO nanosheets relative to the nanowires, nanowire arrays, nanocrystals, and nanotubes. Thus, the present work has provided an opportunity to fabricate new metal oxide composite nanostructures with high-performance energy storage devices.

Aligned ZnO nanorod@Ni–Co layered double hydroxide composite nanosheet arrays with a core–shell structure as high-performance supercapacitor electrode materials

Electrode materials are important components of supercapacitors and have a significant influence on the electrochemical properties.

Metal–organic framework templated fabrication of Cu7S4@Ni(OH)2 core–shell nanoarrays for high-performance supercapacitors

Core–cell Cu₇S₄@Ni(OH)₂ nanorod arrays were fabricated by using metal–organic frameworks as templates, and showed high specific capacitance, superior rate capacity and excellent cycling stability for supercapacitors.

Oxygen-Vacancy-Tunable Electrochemical Properties of Electrodeposited Molybdenum Oxide Films

Molybdenum oxides have been widely studied in recent years, owing to their electrochromic properties, electrocatalytic activities for hydrogen evolution reactions (HERs) and excellent energy storage performance. These characteristics strongly depend on the valence states of Mo in the oxides such as IV, V, and VI, which can be efficiently altered through oxygen deficiencies within the oxides. Here, we present a colloidal electrodeposition method to introduce oxygen vacancies in such Mo oxide films. We prepared uniform MoO _x films and investigated their electrochemical characteristics under different valence states IV, V, and VI. In this paper, we demonstrate that MoO_{2+ x} films, where Mo in valence states IV and V, can be used for high-performance supercapacitor electrodes. Due to their high conductivity, they exhibit an areal capacitance of 89 mF cm^-2 at 1 mA cm^-2 and negligible capacitance loss within 600 cycles. Additionally, we demonstrate that, in a complementary electrochromic device configuration, the introduction of an MoO_{2+ x} counter electrode remarkably lowers the activation potential of WO₃ from -2 to -0.5 V and achieves a fully bleached state at 0.5 V. These properties make the MoO_{2+ x} film an ideal counter electrode to store ions for an electrochromic device. Furthermore, MoO_{3- y} films, where Mo in the valence states V and VI, are obtained by annealing the electrodeposited MoO_{2+ x} film under 200 °C for 24 h. Such films exhibit an excellent catalytic for the HER with an overpotential of 201 mV. Furthermore, we show that MoO₃ films, where Mo at its highest oxidation state (VI), can be obtained via annealing the MoO_{2+ x} film at 300 °C for 6 h, and the resulting films exhibit battery characteristics. Our research provides a new and facile strategy to fabricate substoichiometric molybdenum oxide nanofilms and reveals the effect of different valences on the electrochemical performance of molybdenum oxide films, which opens new doorways for future research in the electrochemical applications of transition metal oxides.

Research on the High-Performance Electrochemical Energy Storage of a NiO@ZnO (NZO) Hybrid Based on Growth Time

A NiO@ZnO (NZO) hybrid with different reaction times was successfully synthesized by a green hydrothermal method. After comparison, it was found that hydrothermal time had a great impact on specific capacitance. As a supercapacitor electrode of NZO-12h, it exhibited the maximum reversible specific capacitance of 985.0 F/g (3.94 F/cm2) at 5 mA/cm2 and 587.5 F/g (2.35 F/cm2) at 50 mA/cm2, as well as a high retention of 74.9% capacitance after 1500 cycles at 20 mA/cm2. Furthermore, the asymmetric electrode device with ZnO-12h and activated carbon (AC) as the positive and negative electrodes was successfully assembled. In addition, the device exhibited a specific capacitance of 85.7 F/g at 0.4 A/g. Moreover, the highest energy density of 27.13 Wh kg−1 was obtained at a power density of 321.42 W kg−1. These desirable electrochemical properties demonstrate that the NZO hybrid is a promising electrode material for a supercapacitor.

Atomic Layer Deposition of Nickel on ZnO Nanowire Arrays for High-Performance Supercapacitors

A novel hybrid core-shell structure of ZnO nanowires (NWs)/Ni as a pseudocapacitor electrode was successfully fabricated by atomic layer deposition of a nickel shell, and its capacitive performance was systemically investigated. Transmission electron microscopy and X-ray photoelectron spectroscopy results indicated that the NiO was formed at the interface between ZnO and Ni where the Ni was oxidized by ZnO during the ALD of the Ni layer. Electrochemical measurement results revealed that the Ti/ZnO NWs/Ni (1500 cycles) electrode with a 30 nm thick Ni-NiO shell layer had the best supercapacitor properties including ultrahigh specific capacitance (∼2440 F g^-1), good rate capability (80.5%) under high current charge-discharge conditions, and a relatively better cycling stability (86.7% of the initial value remained after 750 cycles at 10 A g^-1). These attractive capacitive behaviors are mainly attributed to the unique core-shell structure and the combined effect of ZnO NW arrays as short charge transfer pathways for ion diffusion and electron transfer as well as conductive Ni serving as channel for the fast electron transport to Ti substrate. This high-performance Ti/ZnO NWs/Ni hybrid structure is expected to be one of a promising electrodes for high-performance supercapacitor applications.

Carbon-Induced Generation of Hierarchical Structured Ni0.75Co0.25(CO3)0.125(OH)2 for Enhanced Supercapacitor Performance

Hierarchical nanostructures with heteroatom doping have been considered as an important component in electrode materials for advanced supercapacitors. Herein, with the aid of C, N, and S codoped Ni_0.75Co_0.25(CO₃)_0.125(OH)₂/C (NSH) with a hierarchical structure was synthesized through a facile one-step hydrothermal method. Notably, it is the first report on a carbon precursor as a structure inducer for designing a three-dimensional (3D) carnation-like hierarchical structure. Thanks to the carbon induction effect and the introduction of N/S dopants, the obtained NSH with a 3D architecture exhibits superior performances as electrode materials for supercapacitors. For example, NSH offers a high specific capacity of 277.3 mAh/g at 0.5 A/g. Moreover, the assembled NSH//reduced graphene oxide hydrogel-based hybrid supercapacitor exhibits high energy densities of 44.4 and 11.7 Wh/kg at power densities of 460 W/kg and 9.8 kW/kg, respectively. This result opens up opportunities for carbon-induced methods to control the morphology and structure of other similar materials.

Hierarchical Mn₂O₃ Microspheres In-Situ Coated with Carbon for Supercapacitors with Highly Enhanced Performances

Porous Mn₂O₃ microspheres have been synthesized and in-situ coated with amorphous carbon to form hierarchical C@Mn₂O₃ microspheres by first producing MnCO₃ microspheres in solvothermal reactions, and then annealing at 500 °C. The self-assembly growth of MnCO₃ microspheres can generate hollow structures inside each of the particles, which can act as micro-reservoirs to store biomass-glycerol for generating amorphous carbon onto the surfaces of Mn₂O₃ nanorods consisting of microspheres. The C@Mn₂O₃ microspheres, prepared at 500 °C, exhibit highly enhanced pseudocapacitive performances when compared to the particles after annealed at 400 °C and 600 °C. Specifically, the C@Mn₂O₃ microspheres prepared at 500 °C show high specific capacitances of 383.87 F g⁻¹ at current density of 0.5 A g⁻¹, and excellent cycling stability of 90.47% of its initial value after cycling for 5000 times. The asymmetric supercapacitors assembled with C@Mn₂O₃ microspheres after annealed at 500 °C and activated carbon (AC) show an energy density of up to 77.8 Wh kg⁻¹ at power density of 500.00 W kg⁻¹, and a maximum power density of 20.14 kW kg⁻¹ at energy density of 46.8 Wh kg⁻¹. We can attribute the enhanced electrochemical performances of the materials to their three-dimensional (3D) hierarchical structure in-situ coated with carbon.

Recent Advances in Designing and Fabricating Self-Supported Nanoelectrodes for Supercapacitors

Owing to the outstanding advantages as electrical energy storage system, supercapacitors have attracted tremendous research interests over the past decade. Current research efforts are being devoted to improve the energy storage capabilities of supercapacitors through either discovering novel electroactive materials or nanostructuring existing electroactive materials. From the device point of view, the energy storage performance of supercapacitor not only depends on the electroactive materials themselves, but importantly, relies on the structure of electrode whether it allows the electroactive materials to reach their full potentials for energy storage. With respect to utilizing nanostructured electroactive materials, the key issue is to retain all advantages of the nanoscale features for supercapacitors when being assembled into electrodes and the following devices. Rational design and fabrication of self-supported nanoelectrodes is therefore considered as the most promising strategy to address this challenge. In this review, we summarize the recent advances in designing and fabricating self-supported nanoelectrodes for supercapacitors towards high energy storage capability. Self-supported homogeneous and heterogeneous nanoelectrodes in the forms of one-dimensional (1D) nanoarrays, two-dimensional (2D) nanoarrays, and three-dimensional (3D) nanoporous architectures are introduced with their representative results presented. The challenges and perspectives in this field are also discussed.

Morphology Transition Engineering of ZnO Nanorods to Nanoplatelets Grafted Mo8O23-MoO2 by Polyoxometalates: Mechanism and Possible Applicability to other Oxides

A new fundamental mechanism for reliable engineering of zinc oxide (ZnO) nanorods to nanoplatelets grafted Mo8O23-MoO2 mixed oxide with controlled morphology, composition and precise understanding of the nanoscale reaction mechanism was developed. These hybrid nanomaterials are gaining interest due to their potential use for energy, catalysis, biomedical and other applications. As an introductory section, we demonstrate a new expansion for the concept 'materials engineering' by discussing the fabrication of metal oxides nanostructures by bottom-up approach and carbon nanoparticles by top-down approach. Moreover, we propose a detailed mechanism for the novel phenomenon that was experienced by ZnO nanorods when treated with phosphomolybdic acid (PMA) under ultra-sonication stimulus. This approach is expected to be the basis of a competitive fabrication approach to 2D hybrid nanostructures. We will also discuss a proposed mechanism for the catalytic deposition of Mo8O23-MoO2 mixed oxide over ZnO nanoplatelets. A series of selection rules (SRs) which applied to ZnO to experience morphology transition and constitute Abdelmohsen theory for morphology transition engineering (ATMTE) will be demonstrated through the article, besides a brief discussion about possibility of other oxides to obey this theory.

Ionic Liquid as Reaction Medium for Synthesis of Hierarchically Structured One-Dimensional MoO2 for Efficient Hydrogen Evolution

Hierarchically structured one-dimensional (1D) MoO₂ is synthesized for the first time in ionic liquid 1-butyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide ([BMIM][Tf₂N]). The synthesis system is very simple (single [BMIM][Tf₂N] solvent plus MoO₂(acac)₂ reactant). [BMIM][Tf₂N] itself works as both the reaction medium and the template for the formation of these interesting 1D MoO₂ particles with ultrathin nanosheet subunits. The as-synthesized hierarchically 1D MoO₂_₄₀ particles exhibit remarkable electrocatalytic activity with good long-term cycle stability for the hydrogen evolution reaction (HER) in acidic media. The HER activity of present synthesized MoO₂ is comparable to those of the most active Mo-based electrocatalysts in acid media reported up to now. Therefore, the ionic liquid route provides us with a newly powerful tool for the synthesis of interesting alternative to noble metal catalysts for efficient electrocatalytic production of hydrogen in acidic environment.

A self-template synthesis of porous ZnCo2O4 microspheres for high-performance quasi-solid-state asymmetric supercapacitors

Porous ZnCo₂O₄ microspheres with excellent electrochemical performance were prepared via a facial self-template solvothermal method for application in supercapacitors.

Hierarchical core/shell structures of ZnO nanorod@CoMoO4 nanoplates used as a high-performance electrode for supercapacitors

ZnO@CoMoO₄ core/shell structures as an electrode for supercapacitors exhibited a high specific capacitance of 1.52 F cm⁻² (1169 F g⁻¹) at 2 mA cm⁻² and a good cycling stability of 109% of the initial specific capacitance after 5000 cycles.

Co(OH)2/RGO/NiO sandwich-structured nanotube arrays with special surface and synergistic effects as high-performance positive electrodes for asymmetric supercapacitors

High power density, high energy density and excellent cycling stability are the main requirements for high-performance supercapacitors (SCs) that will be widely used for portable consumer electronics and hybrid electric vehicles. Here we investigate novel types of hybrid Co(OH)2/reduced graphene oxide (RGO)/NiO sandwich-structured nanotube arrays (SNTAs) as positive electrodes for asymmetric supercapacitors (ASCs). The synthesized Co(OH)2/RGO/NiO SNTAs exhibit a significantly improved specific capacity (∼1470 F g(-1) at 5 mV s(-1)) and excellent cycling stability with ∼98% Csp retention after 10 000 cycles because of the fast transport and short diffusion paths for electroactive species, the high utilization rate of electrode materials, and special synergistic effects among Co(OH)2, RGO, and NiO. The high-performance ASCs are assembled using Co(OH)2/RGO/NiO SNTAs as positive electrodes and active carbon (AC) as negative electrodes, and they exhibit a high energy density (115 Wh kg(-1)), a high power density (27.5 kW kg(-1)) and an excellent cycling stability (less 5% Csp loss after 10 000 cycles). This study shows an important breakthrough in the design and fabrication of multi-walled hybrid nanotube arrays as positive electrodes for ASCs.

MoO2-CoO coupled with a macroporous carbon hybrid electrocatalyst for highly efficient oxygen evolution

Cost-effective electrocatalysts for oxygen evolution reactions are attractive for energy conversion and storage processes. A high-performance oxygen evolution reaction (OER) electrocatalyst composed of 3D ordered microporous carbon and a MoO2 skeleton modified by cobalt oxide nanoparticles (MoO2-CoO-Carbon) is produced through a template method. This unique 3DOM structure finely combines the larger surface area of the 3D carbon skeleton and MoO2 as well as stablizes anchoring sites for CoO nanocrystals on the skeleton. The synergistic effect between the catalytic activity between MoO2 and CoO as well as the enhanced electron transport arising from the carbon skeleton contributed to superior electrocatalytic OER properties of MoO2-CoO-Carbon. The M200-C-Carbon hybrid with an overpotential as low as 0.24 V is among the best reported Mo-based OER catalysts. Moreover, the turnover frequency at an overpotential of 0.35 V is 6 times as high as that of commercial RuO2.

High-performance and ultra-stable lithium-ion batteries based on MOF-derived ZnO@ZnO quantum dots/C core-shell nanorod arrays on a carbon cloth anode

MOF-derived ZnO@ZnO Quantum Dots/C core-shell nanorod arrays grown on flexible carbon cloth are successfully fabricated as a binder-free anode for Li-ion storage. In combination with the advantages from the ZnO/C core-shell architecture and the 3D nanorod arrays, this material satisfies both efficient ion and fast electron transport, and thus shows superior rate capability and excellent cycling stability.