Nitrogen-doped mesoporous graphene as a synergistic electrocatalyst matrix for high-performance oxygen reduction reaction

Radical and non-radical cooperative degradation in metal-free electro-Fenton based on nitrogen self-doped biochar

To achieve sustainable metal-free electron-Fenton, N self-doped biochar air-cathode (BCAC) was prepared by pyrolyzing coffee residues. During the pyrolysis process, the endogenous N transformed from edge-doping to graphite-doping. Particularly, N vacancies started to evolve when the peak temperature exceeded 700 °C. A high Tetracycline removal rate of 70.42% was obtained on the BCAC at the current density of 4 mA cm^-2. Quenching tests incorporated with ESR spectroscopy were adopted to identify the specific oxidants produced on the cathode. The results showed that •OH (37.36%), •O₂^- (29.67%) and ¹O₂ (24.17%) played comparable role in the tetracycline removal, suggesting the coexist of radical and non-radical oxidants in our electro-Fenton system. According to the structure characterization and the DFT calculation, graphitic N was suggested as the critical site for H₂O₂ generation, and both graphitic N and pyridinic N were electroactive sites for H₂O₂ activation to •OH. Graphitic N and N vacancies with stronger capabilities in O₂ adsorption and electron-trapping were proposed as the electroactive sites for ¹O₂ and •O₂^- formation. This work predicts a novel electro-Fenton process with cooperative radical and non-radical degradation on N self-doped carbonaceous catalysts at a mild condition, which is extremely meaningful for boosting sustainable electro-Fenton technology.

Successful Manufacturing Protocols of N-Rich Carbon Electrodes Ensuring High ORR Activity: A Review

The exploration and development of different carbon nanomaterials happening over the past years have established carbon electrodes as an important electrocatalyst for oxygen reduction reaction. Metal-free catalysts are especially promising potential alternatives for replacing Pt-based catalysts. This article describes recent advances and challenges in the three main synthesis manners (i.e., pyrolysis, hydrothermal method, and chemical vapor deposition) as effective methods for the production of metal-free carbon-based catalysts. To improve the catalytic activity, heteroatom doping the structure of graphene, carbon nanotubes, porous carbons, and carbon nanofibers is important and makes them a prospective candidate for commercial applications. Special attention is paid to providing an overview on the recent major works about nitrogen-doped carbon electrodes with various concentrations and chemical environments of the heteroatom active sites. A detailed discussion and summary of catalytic properties in aqueous electrolytes is given for graphene and porous carbon-based catalysts in particular, including recent studies performed in the authors’ research group. Finally, we discuss pathways and development opportunities approaching the practical use of mainly graphene-based catalysts for metal–air batteries and fuel cells.

Quantum dot embedded N-doped functionalized multiwall carbon nanotubes boost the short-circuit current of Ru(ii) based dye-sensitized solar cells

Here, we report zinc sulfide quantum dots, ZnS(QDs), moored on N-doped functionalized multiwall carbon nanotubes (MWCNTs) wrapped with reduced graphene oxide (rGO). The MWCNTs have a tangled network, a particular surface area, and a distinctive hollow structure that may be suitable for use as a counter electrode (CE) material. A ZnS@N.f-MWCNTs@rGO composite as the CE on a fluorine-doped tin oxide substrate in a dye-sensitized solar cell (DSSC) was fabricated using a doctor blade technique. The electrochemical performance showed that at the electrolyte/CE interface, the ZnS(QDs) and N-doped functionalized MWCNTs wrapped with rGO (ZnS@N.f-MWCNTs@rGO) electrode has a lower transfer charge resistance (R_ct) and a greater catalytic capacity than naked ZnS(QDs). A power conversion efficiency (PCE) of 9.4% was attained for this DSSC gadget, which is higher than that of a DSSC gadget utilizing ZnS(QDs), ZnS@N.f-MWCNTs, ZnS@rGO and Pt. Also, the DSSC device using ZnS@N.f-MWCNTs@rGO had a fill factor (FF) that was better than the other counter electrodes. The cyclic voltammetry and electrochemical impedance spectra (EIS) electron transfer measurements showed that ZnS@N.f-MWCNTs@rGO films can provide fast electron transfer from the electrolyte to the CE and great electrocatalytic activity to reduce triiodide to a CE based on ZnS@N.f-MWCNTs@rGO in the DSSC.

High oxygen reduction reaction performance nitrogen-doped biochar cathode: A strategy for comprehensive utilizing nitrogen and carbon in water hyacinth

In this study, a novel nitrogen-doped biochar oxygen reduction reaction cathode-water hyacinth carbon, was prepared by ZnCl₂ molten salt carbonization without additional nitrogen source, which displayed a high performance in electro-Fenton (E-Fenton) process. The BET result shows that water hyacinth carbon achieved a much larger specific surface area (829 m²·g^-1) than non-melt salt carbonized one (323 m²·g^-1) and graphite powder (28 m²·g^-1). Furthermore, characterization by XPS and EIS shows that both pyridinic-N (43.24%) and graphitic-N (56.75%) existed in water hyacinth carbon and Warburg constant was only 0.051. Because of a high H₂O₂ producing yield 1.7 mmol·L^-1 and corresponding current efficiency 81.2 ± 2.5% in molten salt carbonized water hyacinth biochar, a high kinetic constant 0.318 min^-1 in DMP degradation was achieved, which was 4 times higher than graphite powder (0.076 min^-1). The TOC removal achieved 86.8% in 30 min and the corresponding energy consumption reached a low level 60.15 kW·h·kgTOC^-1.

Co3O4/MnO2/Hierarchically Porous Carbon as Superior Bifunctional Electrodes for Liquid and All-Solid-State Rechargeable Zinc-Air Batteries

The design of efficient, durable, and affordable catalysts for oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) is very indispensable in liquid-type and flexible all-solid-state zinc-air batteries. Herein, we present a high-performance bifunctional catalyst with cobalt and manganese oxides supported on porous carbon (Co₃O₄/MnO₂/PQ-7). The optimized Co₃O₄/MnO₂/PQ-7 exhibited a comparable ORR performance with commercial Pt/C and a more superior OER performance than all of the other prepared catalysts, including commercial Pt/C. When applied to practical aqueous (6.0 M KOH) zinc-air batteries, the Co₃O₄/MnO₂/porous carbon hybrid catalysts exhibited exceptional performance, such as a maximum discharge peak power density as high as 257 mW cm^-2 and the most stable charge-discharge durability over 50 h with negligible deactivation to date. More importantly, a series of flexible all-solid-state zinc-air batteries can be fabricated by the Co₃O₄/MnO₂/porous carbon with a layer-by-layer method. The optimal catalyst (Co₃O₄/MnO₂/PQ-7) exhibited an excellent peak power density of 45 mW cm^-2. The discharge potentials almost remained unchanged for 6 h at 5 mA cm^-2 and possessed a long cycle life (2.5 h@5 mA cm^-2). These results make the optimized Co₃O₄/MnO₂/PQ-7 a promising cathode candidate for both liquid-type and flexible all-solid-state zinc-air batteries.

Role of Pyridinic-N for Nitrogen-doped graphene quantum dots in oxygen reaction reduction

Nitrogen-doped graphene quantum dots (N-GQDs) exhibit exciting properties in the oxygen reduction reaction (ORR) for ample electrocatalytic edging and N-doped active sites. However, low yield and high dispersity of N-GQDs prohibit their direct application as the electrocatalyst. In this paper, two facile hydrothermal progress were developed to synthesize the high-yield N-GQDs with the diameter of ca. 2-6nm and the hybrid of N-GQDs/Reduced Graphene Oxide (N-GQDs/r-GO). The results demonstrated that the N-GQDs/r-GO display remarkable electrocatalytic activity. Moreover, it can be found that the pyridinic-N plays a major role in ORR. Both the average electron transfer number and the onset potential depend on the content of pyridinic-N. The proposed synthesis strategy is facile and low-cost, serving as a feasible method for the development of highly efficient electrocatalysts.

A MnO2 nanosheet-assisted GSH detection platform using an iridium(iii) complex as a switch-on luminescent probe

A rapid and sensitive detection platform for GSH has been constructed by combining a MnO₂ nanosheet with a luminescent iridium(iii) complex [Ir(Cl-phq)₂(Cl-phen)]⁺. The MnO₂ nanosheet was prepared by using a facile one-step approach and was characterized by TEM. The luminescence intensity of the detection platform responded linearly with the GSH concentration from 1 to 200 μM (R² = 0.9951), and the detection limit for GSH was 0.13 μM. More importantly, practical application of the detection platform for visualizing the intracellular GSH distribution in living zebrafish has also been demonstrated.

Co3O4 nanoparticles anchored on nitrogen-doped reduced graphene oxide as a multifunctional catalyst for H2O2 reduction, oxygen reduction and evolution reaction

This study describes a facile and effective route to synthesize hybrid material consisting of Co₃O₄ nanoparticles anchored on nitrogen-doped reduced graphene oxide (Co₃O₄/N-rGO) as a high-performance tri-functional catalyst for oxygen reduction reaction (ORR), oxygen evolution reaction (OER) and H₂O₂ sensing. Electrocatalytic activity of Co₃O₄/N-rGO to hydrogen peroxide reduction was tested by cyclic voltammetry (CV), linear sweep voltammetry (LSV) and chronoamperometry. Under a reduction potential at −0.6 V to H₂O₂, this constructing H₂O₂ sensor exhibits a linear response ranging from 0.2 to 17.5 mM with a detection limit to be 0.1 mM. Although Co₃O₄/rGO or nitrogen-doped reduced graphene oxide (N-rGO) alone has little catalytic activity, the Co₃O₄/N-rGO exhibits high ORR activity. The Co₃O₄/N-rGO hybrid demonstrates satisfied catalytic activity with ORR peak potential to be −0.26 V (vs. Ag/AgCl) and the number of electron transfer number is 3.4, but superior stability to Pt/C in alkaline solutions. The same hybrid is also highly active for OER with the onset potential, current density and Tafel slope to be better than Pt/C. The unusual catalytic activity of Co₃O₄/N-rGO for hydrogen peroxide reduction, ORR and OER may be ascribed to synergetic chemical coupling effects between Co₃O₄, nitrogen and graphene.

Molybdenum Carbide-Derived Chlorine-Doped Ordered Mesoporous Carbon with Few-Layered Graphene Walls for Energy Storage Applications

In this work, we propose a one-step process to realize the in situ evolution of molybdenum carbide (Mo₂C) nanoflakes into ordered mesoporous carbon with few-layered graphene walls (OMG) by chloridization and self-organization, and simultaneously the Cl-doping of OMG (OMG-Cl) by modulating chloridization and annealing processes is fulfilled. Benefiting from the improvement of electroconductivity induced by Cl-doping, together with large specific surface area (1882 cm² g^-1) and homogeneous pore structures, as anode of lithium ion batteries, OMG-Cl shows remarkable charge capacity of 1305 mA h g^-1 at current rate of 50 mA g^-1 and fast charge-discharge rate within dozens of seconds (a charge time of 46 s), as well as retains a charge capacity of 733 mA h g^-1 at a current rate of 0.5 mA g^-1 after 100 cycles. Furthermore, as a promising electrode material for supercapacitors, OMG-Cl holds the specific capacitances of 250 F g^-1 in 1 M H₂SO₄ solution and 220 F g^-1 at a current density of 0.5 A g^-1 in 6 M KOH solution, which are ∼40% and 20% higher than those of undoped OMG electrode, respectively. The high capacitive performance of OMG-Cl material can be due to the additional fast Faradaic reactions induced from Cl-doping species.

Mesoporous NiCo2O4 Nanoplates on Three-Dimensional Graphene Foam as an Efficient Electrocatalyst for the Oxygen Reduction Reaction

Catalysts for the oxygen reduction reaction (ORR) are highly important in fuel cells and metal-air batteries. Cheap ORR catalysts with ultrahigh electrochemical activity, selectivity, and stability are extremely desirable but still remain challenging. Herein, mesoporous NiCo₂O₄ nanoplate (NP) arrays on three-dimensional (3D) graphene foam are shown to be a highly economical ORR catalyst. This mesoporous mixed-valence oxide can provide more electrocatalytic active sites with increased accessible surface area. In addition, graphene-foam-supported NiCo₂O₄ NP arrays have a 3D hierarchical porous structure, which is of great benefit to ion diffusion and electron transfer. As a result, the mesoporous NiCo₂O₄ NP arrays/graphene foam catalyst exhibits outstanding ORR performance with the four-electron reduction of O₂ to H₂O in alkaline media. Furthermore, the mesoporous catalyst shows enhanced electrocatalytic activity with a half-wave potential of 0.86 V vs RHE and better stability compared with a commercial Pt/C catalyst.

A Bonded Double-Doped Graphene Nanoribbon Framework for Advanced Electrocatalysis

The preparation of a low-cost, high-efficient, and stable electrocatalyst as an alternative to platinum for the oxygen reduction reaction (ORR) is especially important to various energy storage components, such as fuel cells and metal-air batteries. Here, we report a new type of bonded double-doped graphene nanoribbon-based nonprecious metal catalysts in which Fe3C nanoparticles embedded in Fe-N-doped graphene nanoribbon (GNRs) frameworks through a simple pyrolysis. The as-obtained catalyst possesses several desirable merits for the ORR, such as diverse high-efficiency catalytic sites, a high specific surface area, an ideal hierarchical cellular structure, and a highly conductive N-doped GNR network. Accordingly, the prepared catalyst shows a superior ORR activity (an onset potential of 0.02 V and a half-wave potential of -0.148 V versus an Ag/AgCl electrode) in alkaline media, close to the commercial Pt/C catalyst. Moreover, it also displays good ORR behavior in an acidic solution.

A self-template and KOH activation co-coupling strategy to synthesize ultrahigh surface area nitrogen-doped porous graphene for oxygen reduction

Herein, a self-template strategy is developed to synthesize nitrogen doped porous graphene (NDPG) by using porous biomass as a template, fully coupled with KOH activation. As a catalyst, NDPG exhibits outstanding ORR activity and stability.

China rose-derived tri-heteroatom co-doped porous carbon as an efficient electrocatalysts for oxygen reduction reaction

Herein, an N, O and S tri-heteroatom-doped, hierarchically porous carbon material (RPC-M) was obtained from natural rose petals, and as-prepared RPC-M displayed efficient electrocatalyst properties for the oxygen reduction reaction.

Nano copper oxide-incorporated mesoporous carbon composite as multimode adsorbent for selective isolation of hemoglobin

Assembly of nano-objects with tunable size, morphology and function into integrated nanostructures is critical for the development of a novel nanosystem in adsorption, sensing and drug/gene delivery. We demonstrate herein the fabrication of ordered mesoporous carbon by assembling uniform and highly dispersed copper-oxide (CuxOy) nanoparticles into the mesopores via evaporation of solvent from the mixture of triblock copolymer, carbon source and metal nitrate hydrate. The ordered 2D hexagonal mesoporous carbon composite possesses a large surface area of 580.8 cm(2)/g, a uniform pore size of 5.4 nm, a large pore volume of 0.64 cm(3)/g and a high metal content of 3.32 wt %. The mesoporous composite exhibits excellent adsorption selectivity and high adsorption capacity to hemoglobin (Hb) under the synergistic effect of hydrophobic and metal-affinity interactions as well as size exclusion. This facilitates multimode adsorption of hemoglobin fitting Langmuir adsorption model and offers an adsorption capacity of 1666.7 mg g(-1) for hemoglobin. The mesoporous composite is used for the isolation of hemoglobin from human whole blood with high purity. It demonstrates the potential of the copper-oxide nanoparticle-embedded mesoporous carbon composite in selective isolation/removal of specific protein species from biological sample matrixes.

Nitrogen-doped graphene/carbon nanotube/Co3O4 hybrids: one-step synthesis and superior electrocatalytic activity for the oxygen reduction reaction

N-rGO/CNTs/Co₃O₄ hybrids were prepared through a simple one-step hydrothermal method, and exhibited comparable electrocatalytic ORR activity to Pt/C catalysts, excellent tolerance to methanol crossover effects, and even better long-term stability.