Facile fabrication of poly(L-lactic acid)-grafted hydroxyapatite/poly(lactic-co-glycolic acid) scaffolds by Pickering high internal phase emulsion templates

Fabrication of Novel 3-D Nanocomposites of HAp-TiC-h-BN-ZrO2: Enhanced Mechanical Performances and In Vivo Toxicity Study for Biomedical Applications

Due to excellent biocompatibility, bioactivities, and osteoconductivity, hydroxyapatite (HAp) is considered as one of the most suitable biomaterials for numerous biomedical applications. Herein, HAp was fabricated using a bottom-up approach, i.e., a wet chemical method, and its composites with TiC, h-BN, and ZrO2 were fabricated by a solid-state reaction method with enhanced mechanical and biological performances. Structural, surface morphology, and mechanical behavior of the fabricated composites were characterized using various characterization techniques. Furthermore, transmission electron microscopy study revealed a randomly oriented rod-like morphology, with the length and width of these nanorods ranging from 78 to 122 and from 9 to 13 nm. Moreover, the mechanical characterizations of the composite HZBT4 (80HAp-10TiC-5h-BN-5ZrO2) reveal a very high compressive strength (246 MPa), which is comparable to that of the steel (250 MPa), fracture toughness (14.78 MPa m1/2), and Young's modulus (1.02 GPa). In order to check the biocompatibility of the composites, numerous biological tests were also performed on different body organs of healthy adult Sprague-Dawley rats. This study suggests that the composite HZBT4 could not reveal any significant influence on the hematological, serum biochemical, and histopathological parameters. Hence, the fabricated composite can be used for several biological applications, such as bone implants, bone grafting, and bone regeneration.

Fabrication of Poly(ε-caprolactone)-embedded Lignin-Chitosan Nanocomposite Porous Scaffolds from Pickering Emulsions

Poly(ε-caprolactone) (PCL)-incorporated lignin-chitosan biomass-based nanocomposite porous scaffolds have been effectively prepared by templating oil-in-water Pickering high internal phase emulsions (HIPEs). PCL is dissolved in oil and chitosan and lignin nanoparticles originate in water. The continuous phase of the emulsions is gelled by cross-linking of chitosan with genipin and then freeze-dried to obtain porous scaffolds. The resulting scaffolds display interconnected and tunable pore structures. An increase in PCL content increases the mechanical strength and greatly reduces the water absorption capacity of the scaffolds. Scaffolds loaded with the anti-bacterial drug enrofloxacin show a slow drug release profile, adjustable release rate, and favorable long-term anti-bacterial activity. Moreover, Pickering emulsion templates with suitable viscosity are used as 3D printing inks to construct porous scaffolds with personalized geometry. The results imply that the simplicity and versatility of the technique of combining freeze-drying with Pickering HIPE templates is a promising approach to fabricate hydrophobic biopolymer-incorporated biomass-based nanocomposite porous scaffolds for biomedical applications.

Polymeric Gel Scaffolds and Biomimetic Environments for Wound Healing

Infected wounds that do not heal are a worldwide problem that is worsening, with more people dying and more money being spent on care. For any disease to be managed effectively, its root cause must be addressed. Effective wound care becomes a bigger problem when various traditional wound healing methods and products may not only fail to promote good healing. Still, it may also hinder the healing process, causing wounds to stay open longer. Progress in tissue regeneration has led to developing three-dimensional scaffolds (3D) or constructs that can be leveraged to facilitate cell growth and regeneration while preventing infection and accelerating wound healing. Tissue regeneration uses natural and fabricated biomaterials that encourage the growth of tissues or organs. Even though the clinical need is urgent, the demand for polymer-based therapeutic techniques for skin tissue abnormalities has grown quickly. Hydrogel scaffolds have become one of the most imperative 3D cross-linked scaffolds for tissue regeneration because they can hold water perfectly and are porous, biocompatible, biodegradable, and biomimetic. For damaged organs or tissues to heal well, the porosity topography of the natural extracellular matrix (ECM) should be imitated. This review details the scaffolds that heal wounds and helps skin tissue to develop. After a brief overview of the bioactive and drug-loaded polymeric hydrogels, the discussion moves on to how the scaffolds are made and what they are made of. It highlights the present uses of in vitro and in-vivo employed biomimetic scaffolds. The prospects of how well bioactiveloaded hydrogels heal wounds and how nanotechnology assists in healing and regeneration have been discussed.

Cryogenic 3D Printing of w/o Pickering Emulsions Containing Bifunctional Drugs for Producing Hierarchically Porous Bone Tissue Engineering Scaffolds with Antibacterial Capability

How to fabricate bone tissue engineering scaffolds with excellent antibacterial and bone regeneration ability has attracted increasing attention. Herein, we produced a hierarchical porous β-tricalcium phosphate (β-TCP)/poly(lactic-co-glycolic acid)-polycaprolactone composite bone tissue engineering scaffold containing tetracycline hydrochloride (TCH) through a micro-extrusion-based cryogenic 3D printing of Pickering emulsion inks, in which the hydrophobic silica (h-SiO2) nanoparticles were used as emulsifiers to stabilize composite Pickering emulsion inks. Hierarchically porous scaffolds with desirable antibacterial properties and bone-forming ability were obtained. Grid scaffolds with a macroscopic pore size of 250.03 ± 75.88 μm and a large number of secondary micropores with a diameter of 24.70 ± 15.56 μm can be fabricated through cryogenic 3D printing, followed by freeze-drying treatment, whereas the grid structure of scaffolds printed or dried at room temperature was discontinuous, and fewer micropores could be observed on the strut surface. Moreover, the impartment of β-TCP in scaffolds changed the shape and density of the micropores but endowed the scaffold with better osteoconductivity. Scaffolds loaded with TCH had excellent antibacterial properties and could effectively promote the adhesion, expansion, proliferation, and osteogenic differentiation of rat bone marrow-derived mesenchymal stem cells afterward. The scaffolds loaded with TCH could realize the strategy to “kill bacteria first, then induce osteogenesis”. Such hierarchically porous scaffolds with abundant micropores, excellent antibacterial property, and improved bone-forming ability display great prospects in treating bone defects with infection.

Emulsion templated scaffolds of poly(ε-caprolactone) - a review

The role of poly(ε-caprolactone) (PCL) and its 3D scaffolds in tissue engineering has already been established due to its ease of processing into long-term degradable implants and approval from the FDA. This review presents the role of high internal phase emulsion (HIPE) templating in the fabrication of PCL scaffolds, and the versatility of the technique along with challenges associated with it. Considering the huge potential of HIPE templating, which so far has mainly been focused on free radical polymerization of aqueous HIPEs, we provide a summary of how the technique has been expanded to non-aqueous HIPEs and other modes of polymerization such as ring-opening. The scope of coupling of HIPE templating with some of the advanced fabrication methods such as 3D printing or electrospinning is also explored.

Boosting cell proliferation in three-dimensional polyacrylates/nanohydroxyapatite scaffolds synthesized by deep eutectic solvent-based emulsion templating

Among three-dimensional (3D) scaffold fabrication methods, porous polymers templated using high internal phase emulsions (HIPEs) have emerged as an attractive method due to the facile generation of interconnected porosity through a variety of synthetic routes. These include a bottom-up approach to selectively incorporate nanomaterials onto the inner walls in a nonaqueous environment. In this work, novel nonaqueous HIPEs made of different (meth)acrylate monomers and a deep eutectic solvent (DES) were formulated with nonfunctionalized nanohydroxyapatite (NHA), which also played the role of cosurfactant. Free radical polymerization of HIPEs yielded free-standing nanocomposites with 3D interconnected macroporosity and nonfunctionalized NHA selectively decorating the scaffolds' inner surface. The influence of different polymer functionalities, acrylate or methacrylate, their alkyl tail length, and the presence of NHA on MC3T3-E1 preosteoblast cell proliferation in vitro, reactive oxygen species (ROS) production and alkaline phosphatase (ALP) activity were evaluated. All materials presented promising biocompatibility, non-hemolytic activity, negligible inflammatory response along to remarkably enhanced cell proliferation (e.g., up to 160-fold cell proliferation increase compared with polystyrene plate) in vitro, which open the path for the development of scaffolds in regenerative medicine. It is noteworthy that polyHIPEs studied here were obtained using a green synthetic protocol where nonfunctionalized nanoparticles can be selectively incorporated into a scaffolds' inner walls. This versatile technique allows for the simple construction of 3D bioactive nanocomposite scaffolds with varied compositions for cell culture.

Soft κ-carrageenan microgels stabilized pickering emulsion gels: Compact interfacial layer construction and particle-dominated emulsion gelation

HYPOTHESIS

The well-known gelling ability of κ-carrageenan can make aqueous solutions into soft materials, which are crisp and can be mechanically treated into the nano-sized microgel particle (MP) as the building block for constructing the Pickering emulsion gel (PEG). MPs are expected to adhere and further create the network structure in PEGs due to their viscoelastic texture. Herein, properties of PEGs should be possibly altered by using MPs with different pH and ionic strength.

EXPERIMENTS

MPs were prepared by shearing and gelling κ-carrageenan solutions simultaneously. Effects of pH and ionic strength on MPs were formulated, and physical properties of PEGs prepared from corresponding MPs were investigated. The interaction between κ-carrageenan molecules was analyzed by FTIR, and the formation process of the interfacial layer was traced by the interfacial rheological technique.

FINDINGS

The moderate K⁺ could increase the flocculation and hardness of MPs to improve the viscoelasticity of PEGs. Prepared MPs were more favorable for forming PEGs when pH was 8 and 9. The oil fraction impacted physical properties of PEGs slightly. MPs constantly moved to the interface from the continuous phase, forming the compact adsorption layer due to the extrusion of MPs.

Porous Polymers from High Internal Phase Emulsions as Scaffolds for Biological Applications

High internal phase emulsions (HIPEs), with densely packed droplets of internal phase and monomers dispersed in the continuous phase, are now an established medium for porous polymer preparation (polyHIPEs). The ability to influence the pore size and interconnectivity, together with the process scalability and a wide spectrum of possible chemistries are important advantages of polyHIPEs. In this review, the focus on the biomedical applications of polyHIPEs is emphasised, in particular the applications of polyHIPEs as scaffolds/supports for biological cell growth, proliferation and tissue (re)generation. An overview of the polyHIPE preparation methodology is given and possibilities of morphology tuning are outlined. In the continuation, polyHIPEs with different chemistries and their interaction with biological systems are described. A further focus is given to combined techniques and advanced applications.

Multifunctional modified polylactic acid nanofibrous scaffold incorporating sodium alginate microspheres decorated with strontium and black phosphorus for bone tissue engineering

Polylactic acid (PLA) nanofibrous scaffolds have received extensive attention in the field of tissue engineering due to their excellent degradability, biocompatibility and the biomimetic extracellular matrix (ECM) topographies. However, the cell affinity and osteogenic activity of PLA scaffolds is not satisfactory because of their intrinsic hydrophobicity, the absence of cell recognition sites and the nucleation sites of the in vivo biomineralization. Furthermore, effective anti-inflammatory activity for the in vivo scaffold could not be ignored, so a strategy to develop a multifunctional PLLA (poly-L-lactic acid) nanofibrous scaffold with improved hydrophilicity, osteoinductivity, excellent near-infrared photothermal-responsive drug release capacity and anti-inflammatory activity via incorporating sodium alginate microspheres decorated with strontium and ibuprofen-loaded black phosphorus (BP + IBU@SA microspheres) into aminated modified PLLA nanofiber network is proposed in this study. Scanning electron microscopy (SEM) observation showed that the BP + IBU@SA microspheres were homogeneously dispersed into the modified PLLA matrix with uniform nanofiber structure and the chemical composition of the as-prepared scaffolds was confirmed by X-ray diffraction analysis (XRD) and elemental mapping. The photothermal property of the scaffolds was assessed under near-infrared (NIR) light irradiation, the results manifested that the entrapment of BP nanosheets endowed PLLA nanofibrous scaffold with significantly high photothermal conversion efficiency and optical cycle stability. Meanwhile, the scaffold also displayed an excellent photothermal-responsive intelligent drug release performance toward Sr²⁺ and ibuprofen. Moreover, the in vitro studies revealed that the as-developed scaffolds possessed a good biocompatibility for cell adhesion and proliferation and an improved bioactivity to induce apatite formation. All these results indicated the potential of the fabricated scaffolds in tissue engineering applications.

Effect of cetyltrimethyl-ammonium bromide on the properties of hydroxyapatite nanoparticles stabilized Pickering emulsion and its cured poly(L-lactic acid) materials

Hydroxyapatite (HAp) nanoparticles stabilized Pickering emulsions were prepared by dichloromethane (CH₂ Cl₂ ) dissolved poly(L-lactic acid) (PLLA) as the oil phase and the deionized water with different concentrations of cetyltrimethyl-ammonium bromide (CTAB) as the aqueous phase. Effect of CTAB concentration on emulsions type and stability were studied. The emulsion type underwent a two-phase inversion, and emulsion stability increased first and then decreased with increasing CTAB concentrations. Besides, effect of CTAB concentration on zeta potential, aggregate size, contact angle of HAp nanoparticles and the oil-water interfacial tension were studied. The results indicated that zeta potential value of HAp nanoparticles changed from negative to positive, and the contact angle increased to over 80° initially and then decreased to below 40° rapidly. The distribution of HAp nanoparticles on the surface of emulsion droplets with different concentrations of CTAB (5 and 20 mM) was characterized using laser-induced confocal microscope. It revealed the distribution of HAp nanoparticles changed with different CTAB concentrations. The cured PLLA materials were obtained after the solvent being volatilized using as-received emulsions as templates. Scanning electron microscope images showed both microspheres and porous materials with interconnected pore structure were obtained. In conclusion, the microstructure of microspheres or porous PLLA materials is controllable by adjusting the property of HAp nanoparticles stabilized Pickering emulsions with appropriate amount of CTAB.

Investigation on hydrogen bonds and conformational changes in protein/polysaccharide/ceramic based tri-component system

The main attention of present work is to study the molecular level interactions in the interface of biocomposite to increase their applicability. A specific kind of molecular interaction namely, hydrogen bonds play a vital role in deciding composite property. In this study, we construct a tri-component system based on silk fibroin/sodium alginate/hydroxyapatite by varying protein and polysaccharide proportions using in-situ co-precipitation method. The Fourier Transfer Infrared (FTIR) prediction state that prepared composite exhibit inter-(OH⋯N, OH⋯O, OH⋯π) and intra-(OH⋯OH) molecular hydrogen bonds and their strength are varied in accordance with composition of composite. During composite preparation, conformational changes from the random coil to β-sheet structure through intermediate β-turns exist within the protein molecule that is confirmed by vibrational spectra. The crystallographic profile and morphology of HAP were greatly influenced by virtue of polymer matrix. Simulated body fluid (SBF) immersion study shows that biodegradation and swelling ratio are correlated with type of hydrogen bond and secondary structure of protein. Moreover, the in-vitro biomineralization, cytotoxicity and antibacterial activity of composite were analysed in detail.

Porous polycaprolactone and polycarbonate poly(urethane urea)s via emulsion templating: structures, properties, cell growth

Macroporous, emulsion-templated, linear poly(urethane urea) elastomers were synthesized from polyols (poly(ε-caprolactone)s or polycarbonates) and a diisocyanate. Growing cells adhered to the walls, spread, and penetrated into the porous structures.

High Internal Phase Emulsion for Food-Grade 3D Printing Materials

Three-dimensional printing (3DP) has attracted significant attention for its use in additive manufacturing techniques because it provides customizability and flexibility for fabricating structures with arbitrary shapes. Certain applications in the food and medicine industries require 3D printable materials that are both biocompatible and biodegradable. Consequently, this study reports 3D printable materials constructed from food-grade high internal phase emulsions (HIPEs). The studied HIPEs (phase ratio 85%) were stabilized by the efficient adsorption behavior of cod proteins (concentration range, 10-50 mg mL^-1) at the oil-water interface. The stability of the oil-in-water HIPEs was improved by the formation of a concentration-dependent percentage of adsorbed proteins and cross-linking networks, and homogeneous and self-supporting structures were generated after 7 days of storage at 4 °C. The gel-like shear thinning rheological behavior induced by the cross-linking networks in the studied HIPEs can be tuned to obtain the desired printability and extrudability during 3DP. In the present study, the HIPEs stabilized with 50 mg mL^-1 of cod proteins exhibited the highest printing resolution, gel strength, hardness, adhesiveness, and chewiness during 3DP. These food-grade HIPE inks have the potential to diversify the applications of 3DP in foods, cosmetics, drug delivery systems, and packaging materials.

Hofmeister Effect-Assistant Fabrication of All-Natural Protein-based Porous Materials Templated from Pickering Emulsions

Porous materials derived from natural and biodegradable polymers have received growing interest. We demonstrate here an attractive method for the preparation of protein-based porous materials using emulsions stabilized by gliadin-chitosan hybrid particles (GCHPs) as the template, with the addition of gelatin and kosmotropic ions to improve the mechanical strength. The microstructure, mechanical properties, cytotoxicity, and fluid absorption behavior of porous materials were systematically investigated. This strategy facilitated the formation of porous materials with highly open and interconnected pore structure, which can be manipulated by altering the mass ratio of hexane or gelatin in the matrix. The Hofmeister effect resulted from kosmotropic ions greatly enhanced the Young's modulus and the compressive stress at 40% strain of porous materials from 0.56 to 6.84 MPa and 0.26 to 1.11 MPa, respectively. The developed all-natural porous materials were nontoxic to HaCaT cells; they also had excellent liquid (i.e., simulated body fluid and rabbit blood) absorption performance and advantages in resisting stress and maintaining geometry shape. The effects of different concentration amounts and type of salts in the Hofmeister series on the formation and performance of porous materials were also explored. Mechanical strength of porous materials was gradually enhanced when the (NH₄)₂SO₄ concentration increased from 0 to 35 wt %, and the other four kosmotropic salts, including Na₂S₂O₃, Na₂CO₃, NaH₂PO₄, and Na₂SO₄, also showed positive effects. This work opens a simple and feasible way to produce nontoxic and biodegradable porous materials with favorable mechanical strength and controllable pore structure. These materials have broad potential application in many fields involving biomedical and material science, such as cell culture, (bio)catalysis, and wound or bone defect healing.

Basic Principles of Emulsion Templating and Its Use as an Emerging Manufacturing Method of Tissue Engineering Scaffolds

Tissue engineering (TE) aims to regenerate critical size defects, which cannot heal naturally, by using highly porous matrices called TE scaffolds made of biocompatible and biodegradable materials. There are various manufacturing techniques commonly used to fabricate TE scaffolds. However, in most cases, they do not provide materials with a highly interconnected pore design. Thus, emulsion templating is a promising and convenient route for the fabrication of matrices with up to 99% porosity and high interconnectivity. These matrices have been used for various application areas for decades. Although this polymer structuring technique is older than TE itself, the use of polymerised internal phase emulsions (PolyHIPEs) in TE is relatively new compared to other scaffold manufacturing techniques. It is likely because it requires a multidisciplinary background including materials science, chemistry and TE although producing emulsion templated scaffolds is practically simple. To date, a number of excellent reviews on emulsion templating have been published by the pioneers in this field in order to explain the chemistry behind this technique and potential areas of use of the emulsion templated structures. This particular review focusses on the key points of how emulsion templated scaffolds can be fabricated for different TE applications. Accordingly, we first explain the basics of emulsion templating and characteristics of PolyHIPE scaffolds. Then, we discuss the role of each ingredient in the emulsion and the impact of the compositional changes and process conditions on the characteristics of PolyHIPEs. Afterward, current fabrication methods of biocompatible PolyHIPE scaffolds and polymerisation routes are detailed, and the functionalisation strategies that can be used to improve the biological activity of PolyHIPE scaffolds are discussed. Finally, the applications of PolyHIPEs on soft and hard TE as well as in vitro models and drug delivery in the literature are summarised.

Pickering emulsions: Versatility of colloidal particles and recent applications

The versatility of colloidal particles endows the particle stabilized or Pickering emulsions with unique features and can potentially enable the fabrication of a wide variety of derived materials. We review the evolution and breakthroughs in the research on the use of colloidal particles for the stabilization of Pickering emulsions in recent years for the particle categories of inorganic particles, polymer-based particles, and food-grade particles. Moreover, based on the latest works, several emulsions stabilized by the featured particles and their derived functional materials, including enzyme immobilized emulsifiers for interfacial catalysis, 2D colloidal materials stabilized emulsions as templates for porous materials, and Pickering emulsions as adjuvant formulations, are also summarized. Finally, we point out the gaps in the current research on the applications of Pickering emulsions and suggest future directions for the design of particulate stabilizers and preparation methods for Pickering emulsions and their derived materials.

•

We review the evolution and breakthroughs in the research on the use of colloidal particles for the stabilization of Pickering emulsions in recent years for the particle categories of inorganic particles, polymer-based particles, and food-grade particles.

•

We discuss recent emulsions stabilized by the featured particles and their derived functional materials, including enzyme immobilized emulsifiers for interfacial catalysis, 2D colloidal materials stabilized emulsions as templates for porous materials, and Pickering emulsions as adjuvant formulations.

•

We point out the gaps in the current research on the applications of Pickering emulsions and suggest future directions for the design of particulate stabilizers and preparation methods for Pickering emulsions and their derived materials.

Oil-in-eutectic mixture HIPEs co-stabilized with surfactant and nanohydroxyapatite: ring-opening polymerization for nanocomposite scaffold synthesis

Mixtures of a nonionic surfactant and non-functionalized nanohydroxyapatite (NHA) enhanced the stability of oil-in-eutectic mixture high internal phase emulsions (HIPEs). Upon ring opening polymerization of the eutectic mixture composed of l-lactide and ε-caprolactone, biodegradable polyHIPEs with specific cavity sizes and selective interfacial functionalization with NHA are produced.

Preparation of Carboxymethyl Cellulose-Based Macroporous Adsorbent by Eco-Friendly Pickering-MIPEs Template for Fast Removal of Pb2+ and Cd2

Recently, Pickering high internal phase emulsions (Pickering HIPEs) have been widely used to fabricate macroporous materials. However, the high usage of poisonous organic solvent in HIPEs not only greatly increases the cost but also is harmful to human health and environment, which leads to limited large-scale applications. In this study, we prepared a novel monolithic macroporous material of carboxymethyl cellulose-g-poly(acrylamide)/montmorillonite (CMC-g-PAM/MMT) by the free radical polymerization via oil-in-water Pickering medium internal phase emulsions (Pickering MIPEs), which used the non-toxic and eco-friendly flaxseed oil as continuous phase, MMT, and Tween-20 (T-20) as stabilizer. The pore structure of the resulting macroporous materials could be tuned easily by adjusting the content of MMT, co-surfactant T-20, and the oil phase volume fraction. The maximal adsorption capacities of the prepared macroporous material for Pb²⁺ and Cd²⁺ were 456.05 and 278.11 mg/g, respectively, and the adsorption equilibrium can be reached within 30 min. Otherwise, the macroporous monolith exhibited excellent reusability through five adsorption–desorption cycles. Thus, the eco-friendly Pickering-MIPEs is a potential alternative method to be used to fabricate multi-porous adsorption materials for environmental applications.

Pickering emulsion-templated polymers: insights into the relationship between surfactant and interconnecting pores

Pickering high internal phase emulsions (HIPEs) using micron-size polymeric particles as stabilizer were developed. By adding a small amount of surfactant to the Pickering HIPEs, macroporous polymers with a well-define open-cell structure were synthesized with these HIPEs as templates. Owing to the micron-size of the particles, the particle locations could be observed directly by laser scanning confocal microscopy. It was found that the excess and attached particles aggregated and formed thick particle layers around the droplets when the HIPE was stabilized solely by particles. These thick particle layers were extremely stable, and did not easily rupture during or after polymerization, which caused the resulting polymers to have a closed-cell structure. When a small amount of surfactant was added, it was found that the surfactant disaggregated the particles, leaving them well-dispersed in the continuous phase. Moreover, the surfactant tended to occupy the oil-water interface at the contact point of adjacent droplets, where the interconnecting pores were hence likely to be formed after consolidation of the continuous phase. This observation confirmed experimentally the mechanism of interconnecting pore formation in Pickering-HIPE-templated porous polymers proposed theoretically in previous works.

Preparation of PolyHIPE Scaffolds for 3D Cell Culture and the Application in Cytotoxicity Evaluation of Cigarette Smoke

Polystyrene-based polyHIPE (polymerized high internal phase emulsion) materials were prepared by the copolymerization of styrene and divinylbenzene in the continuous phase of a HIPE. The resultant polyHIPE materials were found to have an open-cellular morphology and high porosity, and the polyHIPE structure could be well adjusted by varying the water/oil (W/O) ratio and the amount of emulsifier in the HIPE. Cell culture results showed that the resultant polyHIPE materials, which exhibited larger voids and connected windows as well as high porosity, could promote cell proliferation on the 3D scaffold. A 3D cell cytotoxicity evaluation system was constructed with the polystyrene-based polyHIPE materials as scaffolds and the cigarette smoke cytotoxicity was evaluated. Results showed that the smoke cytotoxicity against A549 cells is much lower in the 3D cell platform compared to the traditional 2D system, showing the great potential of the polyHIPE scaffolds for 3D cell culture and the cytotoxic evaluation of cigarette smoke.

Ammonium-Induced Synthesis of Highly Fluorescent Hydroxyapatite Nanoparticles with Excellent Aqueous Colloidal Stability for Secure Information Storage

In this paper, uniform hydroxyapatite (HA) nanoparticles, with excellent aqueous colloidal stability and high fluorescence, have been successfully synthesized via a citrate-assisted hydrothermal method. The effect of the molar ratio of ammonium phosphate in phosphate (RAMP) and hydrothermal time on the resultant products was characterized in terms of crystalline structure, morphology, colloidal stability, and fluorescence behavior. When the RAMP is 50% and the hydrothermal time is 4 h, the product consists of a pure hexagonal HA phase and a uniform rod-like morphology, with 120- to 150-nm length and approximately 20-nm diameter. The corresponding dispersion is colloidally stable, and transparent for at least one week, and has an intense bright blue emission (centered at 440 nm, 11.6-ns lifetime, and 73.80% quantum efficiency) when excited by 340-nm UV light. Although prolonging the hydrothermal time and increasing the RAMP had no appreciable effect on the aqueous colloidal stability of HA nanoparticles, the fluorescence intensity was enhanced. The cause of HA fluorescence are more biased towards carbon dots (which are mainly polymer clusters and/or molecular fluorophores constituents) trapped in the hydroxyapatite crystal structure. Owing to these properties, a highly fluorescent HA colloidal dispersion could find applications in secure information storage.

Emulsion Template Method for the Fabrication of Gelatin-Based Scaffold with a Controllable Pore Structure

The porous microstructure of scaffolds is an essential consideration for tissue engineering, which plays an important role for cell adhesion, migration, and proliferation. It is crucial to choose optimum pore sizes of scaffolds for the treatment of various damaged tissues. Therefore, the proper porosity is the significant factor that should be considered when designing tissue scaffolds. Herein, we develop an improved emulsion template method to fabricate gelatin-based scaffolds with controllable pore structure. Gelatin droplets were first prepared by emulsification and then solidified by genipin to prepare gelatin microspheres. The microspheres were used as a template for the fabrication of porous scaffolds, which were gathered and tightened together by dialdehyde amylose. The results showed that emulsification can produce gelatin microspheres with narrow size distribution. The size of gelatin microspheres was easily controlled by adjusting the concentration of gelatin and the speed of mechanical agitation. The gelatin-based scaffolds presented macroporous and interconnected structure. It is interesting that the pore size of scaffolds was directly related to the size of gelatin microspheres, displaying the same trend of change in size. It indicated that the gelatin microspheres can be used as the proper template to fabricate gelatin-based scaffold with a desired pore structure. In addition, the gelatin-based scaffolds possessed good blood compatibility and cytocompatibility. Overall, the gelatin-based scaffolds exhibited great potential in tissue engineering.

Molecularly imprinted polymers fabricated by Pickering emulsion polymerization for the selective adsorption and separation of quercetin from Spina Gleditsiae

Hydroxyapatite-stabilized Pickering emulsions and their application in the extraction of quercetin.

Sonochemical synthesis of cellulose/hydroxyapatite nanocomposites and their application in protein adsorption

Hydroxyapatite (HA) is the main mineral constituent in the hard tissue of vertebrate, which is recognized as an important biomedical material owing to its excellent bioactivity and biocompatibility. Herein, we report a facile and green sonochemical route for the rapid synthesis of cellulose/HA nanocomposites in NaOH/urea aqueous solution. The in vitro behavior of the cellulose/HA nanocomposites was studied to evaluate the biological response of the nanocomposites following immersion in simulated body fluid for various periods (maximum of 28 days). The HA crystals formed on the surface of the nanocomposites were carbonate-containing apatite, which is similar to the naturally occurring calcium phosphate materials. The HA nanosheets (assembly of nanorods) were mineralized on the surface of the nanocomposites, and maximum mass of the nanocomposites was reached 1.82 times of initial mass after 28 days of soaking. Moreover, the as-prepared cellulose/HA nanocomposites have good cytocompatibility, and show a relatively high protein adsorption ability using hemoglobin as a model protein. These results indicate that the as-prepared cellulose/HA nanocomposites are promising for applications in various biomedical fields such as tissue engineering and protein/drug delivery.

Study on influencing factors of Pickering emulsions stabilized by hydroxyapatite nanoparticles with nonionic surfactants

Emulsions were prepared using hydroxyapatite nanoparticles and nonionic surfactant sorbitan monooleate (Span 80) as emulsifier. Effects of Span 80 concentration, emulsification time, emulsification rate, poly(l-lactic acid) (PLLA) concentration and the surface chemical properties of hydroxyapatite nanoparticles on emulsion properties were systematically studied. The results showed that emulsion would undergo a phase inversion from oil-in-water (O/W) type to water-in-oil (W/O) type with an increase in Span 80 concentration. All of the above factors are closely related to emulsion type and stability. SEM results indicated that cured materials with different structures were obtained using these emulsions as templates via in situ evaporation; especially, open-cell porous structures were obtained by a mixture of hydroxyapatite and a moderate concentration of Span 80. The mechanism of this emulsion system is proposed in relation to the emulsion properties and cured material structure, which should be attributed to the formation of hydrogen bonds between hydroxyapatite and Span 80 by hydroxyl groups as well as their location changes in the emulsion.

Macroporous polymers prepared via frozen UV polymerization of the emulsion-templates stabilized by a low amount of surfactant

Macroporous polymers based on high internal phase emulsions (HIPEs) possess tunable porous structures and device shapes, and these characteristics make it possible for it to be applied in many fields. However, such materials also demonstrate undesirable properties, such as their brittleness and chalkiness, due to a great amount of surfactant required (5.0-50.0%, relative to the external phase) to realize the transformation from HIPEs to macroporous polymers (polyHIPEs). Herein, O/W HIPEs stabilized by a small amount (as low as 0.1 wt%, relative to the external phase) of commercial surfactant were prepared by magnetic stirring and subsequently homogenizing, and well-defined polyHIPEs were obtained through frozen UV polymerization of these HIPEs. In this process, the prepared HIPE was squeezed out by an injector and frozen at once, which effectively prevented the coalescence of internal phase. Then a 365 nm UV light was utilized to initiate the polymerization and the temperature was kept at -20 °C in order to avoid the melting of the frozen HIPE. After the polymerization, samples, having a typical polyHIPE structure, were obtained. Besides, the original monomer, surfactant and the oil (internal phase) were respectively replaced, and well-defined polyHIPEs could still be obtained. All the results suggested that frozen UV polymerization of HIPEs was an effective and universal approach to produce polyHIPEs with a low amount of surfactant.

Emulsion Hydrogel Soft Motor Actuated by Thermal Stimulation

An emulsion hydrogel motor (E-H motor), constituted by low-boiling-point oil fuel and a hydrogel matrix, is prepared through a simple yet versatile oil-in-water (O/W) emulsion template method. The E-H motor can be efficiently propelled by the bubbles generated under a thermal stimulus. As thermally induced explosion occurs inside the E-H motor (diameter ∼4.0 mm and length ∼6.0 mm), the gas bubbles resulting from thermotropic phase transition are violently ejected from one side, leading to a fast speed of 14.78 ± 4.82 mm s^-1 in a 60 °C aqueous solution. Additionally, multiple water-insoluble organic solvents can serve as the fuel for self-propulsion, which demonstrates the favorable universality of the E-H motor. The magnetic navigation and near-infrared propulsion can be realized through incorporating hydrophilic iron oxide (Fe₃O₄) nanoparticles and graphene oxide (GO) into the aqueous phase. Moreover, the synchronous integration of GO and enrofloxacin bactericide can enable intelligent targeted cargo transportation and delivery. The attractive self-propulsion performance, precise locomotion control, and formidable integration ability of the emulsion hydrogel-based miniaturized soft motor hold great promise for numerous practical applications.

Fabrication of Hierarchical Macroporous Biocompatible Scaffolds by Combining Pickering High Internal Phase Emulsion Templates with Three-Dimensional Printing

Biocompatible and biodegradable porous scaffolds with adjustable pore structure have aroused increasing interest in bone tissue engineering. Here, we report a facile method to fabricate hierarchical macroporous biocompatible (HmPB) scaffolds by combining Pickering high internal phase emulsion (HIPE) templates with three-dimensional (3D) printing. HmPB scaffolds composed of a polymer matrix of poly(l-lactic acid), PLLA, and poly(ε-caprolactone), PCL, are readily fabricated by solvent evaporation of 3D printed Pickering HIPEs which are stabilized by hydrophobically modified silica nanoparticles (h-SiO₂). The pore structure of HmPB scaffolds is easily tailored to be similar to natural extracellular matrix (ECM) by varying the fabrication conditions of the Pickering emulsion or adjusting the printing parameters. In addition, in vivo drug release studies which employ enrofloxacin (ENR) as a model drug indicate the potential of HmPB scaffolds as a drug carrier. Furthermore, in vivo cell culture assays prove that HmPB scaffolds that possess good biocompatibility as mouse bone mesenchymal stem cells (mBMSCs) can adhere and proliferate well on them. All the results suggest that HmPB scaffolds hold great potential in bone tissue engineering applications.

Fabrication of CMC-g-PAM Superporous Polymer Monoliths via Eco-Friendly Pickering-MIPEs for Superior Adsorption of Methyl Violet and Methylene Blue

A series of superporous carboxymethylcellulose-graft-poly(acrylamide)/palygorskite (CMC-g-PAM/Pal) polymer monoliths presenting interconnected pore structure and excellent adsorption properties were prepared by one-step free-radical grafting polymerization reaction of CMC and acrylamide (AM) in the oil-in-water (O/W) Pickering-medium internal phase emulsions (Pickering-MIPEs) composed of non-toxic edible oil as a dispersion phase and natural Pal nanorods as stabilizers. The effects of Pal dosage, AM dosage, and co-surfactant Tween-20 (T-20) on the pore structures of the monoliths were studied. It was revealed that the well-defined pores were formed when the dosages of Pal and T-20 are 9–14 and 3%, respectively. The porous monolith can rapidly adsorb 1,585 mg/g of methyl violet (MV) and 1,625 mg/g of methylene blue (MB). After the monolith was regenerated by adsorption-desorption process for five times, the adsorption capacities still reached 92.1% (for MV) and 93.5% (for MB) of the initial maximum adsorption capacities. The adsorption process was fitted with Langmuir adsorption isotherm model and pseudo-second-order adsorption kinetic model very well, which indicate that mono-layer chemical adsorption mainly contribute to the high-capacity adsorption for dyes. The superporous polymer monolith prepared from eco-friendly Pickering-MIPEs shows good adsorption capacity and fast adsorption rate, which is potential adsorbent for the decontamination of dye-containing wastewater.

Preparation and Properties of Bamboo Fiber/Nano-hydroxyapatite/Poly(lactic-co-glycolic) Composite Scaffold for Bone Tissue Engineering

In this study, bamboo fiber was first designed to incorporate into nano-hydroxyapatite/poly(lactic-co-glycolic) to obtain a new composite scaffold of bamboo fiber/nano-hydroxyapatite/poly(lactic-co- glycolic) (BF/n-HA/PLGA) by freeze-drying method. The effect of their components and some factors consisting of different freeze temperatures, concentrations, and pore-forming agents on the porous morphology, porosity, and compressive properties of the scaffold were investigated by scanning electron microscope, modified liquid displacement method, and electromechanical universal testing machine. The results indicated that the 5% BF/30% n-HA/PLGA composite scaffold, prepared with 5% (w/v) high concentration and frozen at -20 °C without pore-forming agent, had the best ideal porous structure and porosity as well as compressive properties, which far exceed those of n-HA/PLGA composite scaffold. In addition, the in vitro simulated body fluids soaking and cell culture experiment showed the addition of BF into the scaffold accelerated the BF/n-HA/PLGA composite scaffolds degradation and exhibited good cytocompatibility, including attachment and proliferation. All the results of the study show that BF has improved the properties of n-HA/PLGA composite scaffolds and BF/n-HA/PLGA might have a great potential for bone tissue engineering scaffold.

Electrospray biodegradable microcapsules loaded with curcumin for drug delivery systems with high bioactivity

Biodegradable microcapsules as novel drug delivery systems were successfully fabricated by one-step processing using an electrospray technique.

Pore Structure of Macroporous Polymers Using Polystyrene/Silica Composite Particles as Pickering Stabilizers

A novel approach for the preparation of interconnected macroporous polymers with a controllable pore structure was reported. The method was based on the polymerization of water-in-oil Pickering high internal phase emulsion (HIPE) stabilized by polystyrene (PS)/silica composite particles. The composite Pickering stabilizers were facilely obtained by mixing positively charged PS microspheres and negatively charged silica nanoparticles, and their amphiphilicity could be delicately tailored by varying the ratio of PS and silica. The droplet size of Pickering HIPEs was characterized using an optical microscope. The pore structure of polymer foams was observed using a scanning electron microscope. The interconnectivity of macroporous polymers was evaluated upon their gas permeability, which was greatly improved after etching PS microspheres included in the Pickering stabilizers with tetrahydrofuran. As a result, fine tailoring of the pore structure of polymer foams could be realized by simply tuning the ratio of PS to silica particles in the composite stabilizer.