CH3-π interaction of explosives with cavity of a TPE macrocycle: the key cause for highly selective detection of TNT

A facile and novel AIE vesicle as nanoprobe for simple and rapid detection of TNT in water

Trinitrotoluene (TNT) in water will damage biological tissues and organs of the human body due to its high toxicity and risk. However, the simple and rapid detection of TNT in water is always a challenging task. Herein, we reported a novel aggregation-induced emission-a vesicle (AIE-a-V) as fluorescent nanoprobe for the detection of TNT in water by π-π self-assembly of π-π stacking induced aggregation-emission. The AIE-a-V was spherical in shape with a hydrodynamic diameter of ∼106 nm and possessed robust stability. In addition, the AIE-a-V showed strong fluorescence and its fluorescence would quickly disappear after contact with TNT. Based on this, without any cumbersome operation, the AIE-a-V could detect the presence of TNT in water within 60 s, and its minimum detectable concentration was as low as 50 nM. Moreover, the AIE-a-V could selectively detect TNT in water and would not be affected by other components, including other aromatic compounds, toxic metals, and acid-base. Therefore, the new AIE-a-V with simplicity, rapidity, sensitivity and selectivity have great application potential in the detection of TNT in water.

Polymers and Polymer-Based Materials for the Detection of (Nitro-)explosives

Methods for the remote detection of warfare agents and explosives have been in high demand in recent times. Among the several detection methods, fluorescence methods appear to be more convenient due to their low cost, simple operation, fast response time, and naked-eye-visible sensory response. For fluorescence methods, a large variety of fluorescent materials, such as small-molecule-based fluorophores, aggregation-induced emission fluorophores/materials, and supramolecular systems, have been reported in the literature. Among them, fluorescent (bio)polymers/(bio)polymer-based materials have gained wide attention due to their excellent mechanical properties and sensory performance, their ability to recognize explosives via different sensing mechanisms and their combinations, and, finally, the so-called amplification of the sensory response. This review provides the most up-to-date data on the utilization of polymers and polymer-based materials for the detection of nitroaromatic compounds (NACs)/nitro-explosives (NEs) in the last decade. The literature data have been arranged depending on the polymer type and/or sensory mechanism.

A simple AIE chemosensor based on diphenyl imidazole scaffold for 2,4,6-trinitrophenol detection and dye absorption

Fluorescent material exhibiting aggregation-induced emission (AIE) has demonstrated to be a facile and effective method to detect 2,4,6-trinitrophenol (TNP) due to its excellent features. In this study, a novel diphenyl imidazole-based fluorescent material (DINP) was successfully synthesized via a facile method. Fluorescence spectra showed that DINP had a typical AIE effect in DMSO/water solution, and the fluorescence emission was effectively quenched by TNP without being affected by other explosives. The Stern-Volmer quenching constant of 2.70 × 10⁵ M^-1 and detection limit of 7.2 × 10^-8 M demonstrated that the DINP aggregates could serve as potential chemosensor for TNP detection. The mechanism behind the quenching of fluorescence could be ascribed to the formation of ground state complex. In addition, fluorescent test strips and TLC plate prepared with the aggregates provided an easy and low cost method for TNP detection in the aqueous solution. Especially, DINP was applied to quantitatively detect the content of TNP in real water samples. Furthermore, the aggregates exhibited good selective adsorptive performance to rhodamine B dye in aqueous solution with high adsorption efficiency of 98 % in a few minutes.

A Highly Efficient Fluorescent Sensor Based on AIEgen for Detection of Nitrophenolic Explosives

The detection of nitrophenolic explosives is important in counterterrorism and environmental protection, but it is still a challenge to identify the nitroaromatic compounds among those with a similar structure. Herein, a simple tetraphenylethene (TPE) derivative with aggregation-induced emission (AIE) characteristics was synthesized and used as a fluorescent sensor for the detection of nitrophenolic explosives (2, 4, 6-trinitrophenol, TNP and 2, 4-dinitrophenol, DNP) in water solution and in a solid state with a high selectivity. Meanwhile, it was found that only hydroxyl containing nitrophenolic explosives caused obvious fluorescence quenching. The sensing mechanism was investigated by using fluorescence titration and ¹H NMR spectra. This simple AIE-active probe can potentially be applied to the construction of portable detection devices for explosives.

Non-covalent functionalization of graphene sheets by pyrene-endcapped tetraphenylethene: Enhanced aggregation-induced emission effect and application in explosive detection

In this work, a dispersible graphene-based material with a characteristic of aggregation-induced emission (AIE) was prepared by wet chemical reduction of graphene oxide (GO). During the GO reduction process, a conjugated molecule TPEP containing tetraphenylethylene (TPE) and pyrene was employed as a stabilizer because of the π–π interactions and the wrapping effect. The as-prepared rGO-TPEP not only has good dispersion in solution but also processes the AIE feature. Its fluorescence intensity is 2.23 times higher than that of TPEP at the same condition. The unique optical properties and AIE effect enable the rGO-TPEP as a chemical sensor for highly sensitive explosive detection in aggregated state and solid state. In the aggregated state, trace 2,4-dinitrotoluene (DNT) can be detected by the rGO-TPEP even when the concentration is as low as 0.91 ppm, and the quenching constant is as high as 2.47 × 104 M^-1.

CTV Based Sensor for the Rapid Detection of Nitro Toluene With Computational Studies and Molecular Modelling

A new tri-naphthoylated Cyclotriveratrylene molecule has been synthesized for the rapid and sensitive detection of 4-nitrotoluene (4-NT) among various nitro aromatic compounds (NACs) by using a spectrofluorimetric method. The newly derrivatized cyclotriveratrylene compound is successfully confirmed by using the available techniques of ¹H-NMR, ¹³CNMR, and ESI-MS. This synthesised molecule is 1NC-CTV (1-Naptholy Chloride-Cyclotriveratrylene). Strong quenching in the fluorescence intensity of 1NC-CTV was observed upon the addition of 4-NT. Further quantum yield studies were carried out and by using the stern volmer it was concluded that the fluorescence quenching mechanism is dynamic or static. The molecule 1NC-CTV was further studied with the help of computational methods such as molecular docking to study the binding interactions and properties of the molecule.

Chiral assembly of organic luminogens with aggregation-induced emission

Chirality is important to chemistry, biology and optoelectronic materials. The study on chirality has lasted for more than 170 years since its discovery. Recently, chiral materials with aggregation-induced emission (AIE) have attracted increasing interest because of their fascinating photophysical properties. In this review, we discussed the recent development of chiral materials with AIE properties, including their molecular structures, self-assembly and functions. Generally, the most effective strategy to design a chiral AIE luminogen (AIEgen) is to attach a chiral scaffold to an AIE-active fluorophore through covalent bonds. Moreover, some propeller-like or shell-like AIEgens without chiral units exhibit latent chirality upon mirror image symmetry breaking. The chirality of achiral AIEgens can also be induced by some optically active molecules through non-covalent interactions. The introduction of an AIE unit into chiral materials can enhance the efficiency of their circularly polarized luminescence (CPL) in the solid state and the dissymmetric factors of their helical architectures formed through self-assembly. Thus, highly efficient circularly polarized organic light-emitting diodes (CPOLEDs) with AIE characteristics are developed and show great potential in 3D displays. Chiral AIEgens are also widely utilized as "turn on" sensors for rapid enantioselective determination of chiral reagents. It is anticipated that the present review can entice readers to realize the importance of chirality and attract much more chemists to contribute their efforts to chirality and AIE study.

Multi-stimuli distinct responsive D–A based fluorogen oligomeric tool and efficient detection of TNT vapor

P1 shows distinct emission responses with multi-stimuli, i.e., quenching for TNT sensing, red shifting for acid and base vapors, blue shifting against MFC behavior, and solvent polarity-dependent emission.

Copper nanocluster composites for analytical (bio)-sensing and imaging: a review

As an ideal substitute for traditional organic fluorescent dyes or up-conversion nanomaterials, copper nanoclusters (CuNCs) have developed rapidly and have been involved in exciting achievements in versatile applications. The emergence of novel CuNCs composites improves the poor stability and fluorescence intensity of CuNCs. With this in mind, great efforts have been made to develop a wide variety of CuNCs composites, and impressive progress has been made in the past few years. In this review, we systematically summarize absorption, fluorescence, electrochemiluminescence, and catalytic properties and focus on the multiple factors that affect the fluorescence properties of CuNCs. The fluorescence properties of CuNCs are discussed from the point of view of core size, surface ligands, self-assembly, metal defects, pH, solvent, ions, metal doping, and confinement effect. Especially, we illustrate the research progress and representative applications of CuNCs composites in bio-related fields, which have received considerable interests in the past years. Additionally, the sensing mechanism of CuNCs composites is highlighted. Finally, we summarize current challenges and look forward to the future development of CuNCs composites. Schematic diagram of the categories, possible sensing mechanisms, and bio-related applications of copper nanoclusters composites.

A porous β-cyclodextrin-based terpolymer fluorescence sensor for in situ trinitrophenol detection

Permanent porosity plays a key role in fluorescent-based polymers with “on–off” emissive properties due to the role of guest adsorption at accessible fluorophore sites of the polymer framework. In particular, we report on the design of a porous fluorescent polymer (FL-PFP) composed of a covalently cross-linked ternary combination of β-cyclodextrin (β-CD), 4,4′-diisocyanato-3,3′-dimethyl biphenyl (DL) and tetrakis(4-hydoxyphenyl)ethene (TPE). The textural properties of FL-PFP were evaluated by the gas uptake properties using N₂ and CO₂ isotherms. The BET surface area estimates according to N₂ uptake ranged from 100–150 m² g⁻¹, while a lower range of values (20–30 m² g⁻¹) was estimated for CO₂ uptake. Model nitroarenes such as trinitrophenol (TNP) and nitrobenzene (NB) were shown to induce turn-off of the fluorescence emission of the polymer framework at concentrations near 50 nM with ca. 50% fluorescence quenching upon TNP adsorption and detection. The strong donor–acceptor interaction between the nitroarenes and the TPE reporter unit led to fluorescence quenching of FL-PFP upon nitroarene adsorption. The fluorescence lifetime (τ) for FL-PFP (τ = 3.82 ns) was obtained along with a quantum yield estimate of 0.399 relative to quinine sulphate. The β-CD terpolymer reported herein has significant potential for monitoring the rapid and controlled detection of nitroarenes (TNP and NB) in aquatic environments and other complex media.

Permanent porosity plays a key role in fluorescent-based polymers with “on–off” emissive properties due to the role of guest adsorption at accessible fluorophore sites of the polymer framework.

Synthesis, aggregation induced emission and through space conjugation of triphenylvinylphenyl substituted [2.2]paracyclophane-1,9-diene

4-Bromo substituted [2.2]paracyclophane-1,9-diene was synthesized from the corresponding dithia[3.3]paracyclophane in three steps through benzyne Steven rearrangement, oxidation, and a thermal elimination reaction. 4-Triphenylvinylphenyl substituted [2.2]paracyclophane-1,9-diene was successfully prepared by the Suzuki-Miyaura cross-coupling reaction of 4-bromo substituted [2.2]paracyclophane-1,9-diene and 4,4,5,5-tetramethyl-2-(4-(1,2,2-triphenylvinyl)phenyl)-1,3,2-dioxaborolane using Pd(OAc)2 as a catalyst, S-Phos as a ligand and K3PO4 as a base. The structures of bromo substituted [2.2] paracyclophane-1,9-diene and triphenylvinylphenyl substituted [2.2]paracyclophane-1,9-diene were fully characterized by 1H NMR spectroscopy and X-ray crystallography. 4-Triphenylvinylphenyl substituted [2.2]paracyclophane-1,9-diene exhibited aggregation-induced emission characteristics when the water fraction was higher than 80% in the THF/water mixtures. 4-Triphenylvinylphenyl substituted [2.2]paracyclophane-1,9-diene displays much higher fluorescence when the water fraction is 90% compared to that of model compounds due to both through bond and through space conjugation. To the best for our knowledge, we are the first to synthesize triphenylvinylphenyl substituted [2.2]paracyclophane-1,9-diene with aggregation-induced emission characteristics.

Tetraphenylethylene-Based AIE-Active Probes for Sensing Applications

This Review provides a comprehensive analysis of recent development in the field of aggregation-induced emission (AIE)-active tetraphenylethylene (TPE) luminophores and their applications in biomolecular science. It begins with a discussion of the diverse range of structural motifs that have found particular applications in sensing, and demonstrates that TPE structures and their derivatives have been used for a diverse range of analytes such as such as H⁺, anions, cations, heavy metals, organic volatiles, and toxic gases. Advances are discussed in depth where TPE is utilized as a mechanoluminescent material in bioinspired receptor units with specificity for analytes for such as glucose or RNA. The rapid advances in sensor research make this summary of recent developments in AIE-active TPE luminophores timely, in order to disseminate the advantages of these materials for sensing of analytes in solution, as well as the importance of solid and aggregated states in controlling sensing behavior.

Monosulfonicpillar[5]arene: Synthesis, Characterization, and Complexation with Tetraphenylethene for Aggregation-Induced Emission

A pillar[5]arene derivative with a hydrophilic sulfonic group, i.e., monosulfonicpillar[5]arene (MSP5), has been successfully synthesized for the first time, which exhibited strong binding affinity towards alcohol analogs. Significantly, fluorescent supramolecular ensemble was fabricated from the supramolecular complexation of MSP5 and a neutral guest with tetraphenylethene core. Enhanced fluorescent emission of this system can be detected both in dilute solution and the solid state, and its temperature and competitive guest multi-responsive properties suggest its promising application as a chemical sensor towards alcohol analogs, ethylenediamine, and temperature variations.

Conjugated polymers containing tetraphenylethylene in the backbones and side-chains for highly sensitive TNT detection

The novel polytriphenylamines derivatives PTPA1-TPE and PTPA2-TPE with TPE as side groups and bis(tert-butyl)-TPE in the backbones have been successfully synthesized via Yamamoto-type coupling under microwave heating. The incorporation of TPE units in the backbones and side-chains endows the polymers with a distinct AIE effect and high fluorescence quantum yields in the solid state. Meanwhile, nitroaromatic explosive detection based on dispersed, electron-rich PTPA1-TPE and PTPA2-TPE nanoaggregates in THF/water was carried out. Both of them show high sensitivity towards the TNT analyte, with a maximum Stern-Volmer quenching constant K sv of up to 8.3 × 104 M-1. In addition, the paper strip test demonstrates the promising practical application of the polymers as solid state sensors towards PL-based nitroaromatic explosive detection.

Macrocycles and cages based on tetraphenylethylene with aggregation-induced emission effect

Syntheses, photophysical properties and applications of macrocycles and cages based on tetraphenylethylene with aggregation-induced emission (AIE) effect.

Development of luminescent sensors based on transition metal complexes for the detection of nitroexplosives

The detection of nitro explosives by transition metal complexes/metallosupramolecules with their designs and sensing mechanisms are comprehensively reviewed.

Facile fabrication of AIE/AIEE-active fluorescent nanoparticles based on barbituric for cell imaging applications

Compounds 1–4 were synthesized, and the optical properties and mechanisms were investigated. Compound 4 was applied to the cell imaging.

“Not quenched” aggregates of a triphenylene derivative for the sensitive detection of trinitrotoluene in aqueous medium

“Not quenched” porous aggregates of triphenylene derivative 4 have been utilized for the detection of TNT in solution, solid and vapour phases with detection limits of 22.7 attograms cm⁻².

Rapid and Specific Aqueous-Phase Detection of Nitroaromatic Explosives with Inherent Porphyrin Recognition Sites in Metal-Organic Frameworks

Development of a rapid and effective method for the detection of 2,4,6-trinitrotoluene (TNT) in aqueous phase has attracted great attention. In this work, the fluorescent porphyrin-based metal-organic frameworks (MOFs) of PCN-224 were successfully exploited as a fluorescent probe for the rapid and selective TNT detection in water media. This strategy combined the advantages of fluorescent porphyrin molecules and porous MOFs, which not only overcame the aggregation of hydrophobic tetrakis(4-carboxyphenyl)porphyrin (TCPP) recognition sites but also promoted TNT to interact with recognition sites in virtue of the high surface and intrinsic open structure of MOFs. As a result, a rapid response time of as short as 30 s was obtained for the elaborated fluorescent probe. Meanwhile, the bright red emission of porphyrin units in PCN-224 could be proportionally quenched in correlation with the applied TNT level through the formation of TNT-TCPP complex in the ground state. The specificity of the employed sensory platform for TNT recognition was scarcely affected by other possible coexistent interfering species. Furthermore, this fluorescent PCN-224 probe presented a much higher quenching efficiency for TNT than other structurally similar nitroaromatic compounds and was successfully applied for the quantitative detection of TNT in the mixed nitroaromatic explosive samples. This prefigured their great potentials of practical TNT detection in water media for public safety and security.