Hydrogen-bond-mediated in situ fabrication of AgNPs/agar/PAN electrospun nanofibers as reproducible SERS substrates

Advances in uremic toxin detection and monitoring in the management of chronic kidney disease progression to end-stage renal disease

Patients with end-stage kidney disease (ESKD) rely on dialysis to remove toxins and stay alive. However, hemodialysis alone is insufficient to completely remove all/major uremic toxins, resulting in the accumulation of specific toxins over time. The complexity of uremic toxins and their varying clearance rates across different dialysis modalities poses significant challenges, and innovative approaches such as microfluidics, biomarker discovery, and point-of-care testing are being investigated. This review explores recent advances in the qualitative and quantitative analysis of uremic toxins and highlights the use of innovative methods, particularly label-mediated and label-free surface-enhanced Raman spectroscopy, primarily for qualitative detection. The ability to analyze uremic toxins can optimize hemodialysis settings for more efficient toxin removal. Integration of multiple omics disciplines will also help identify biomarkers and understand the pathogenesis of ESKD, provide deeper understanding of uremic toxin profiling, and offer insights for improving hemodialysis programs. This review also highlights the importance of early detection and improved understanding of chronic kidney disease to improve patient outcomes.

In situ assembly of silver nanoparticles throughout electrospun oriented alginate nanofibers for hazardous rust trace detection on bronze

A convenient and reliable surface-enhanced Raman scattering (SERS) substrate has been developed for the surface corrosion analysis of bronze artifacts. The substrate consists of oriented alginate nanofiber membranes containing silver nanoparticles (Ag NPs), which were obtained through electrostatic spinning, ion exchange, and in-situ reduction. By controlling the reduction time, Ag/alginate nanofiber membranes with different contents, sizes, and distributions were obtained. The Ag/alginate nanofiber#20 membranes, obtained with a reduction time of 20 min, reached a detection limit of 10-12 M for R6G with an enhancement factor of 6.64 × 107. In the trace detection of bronze patina, the intensity of the characteristic peaks of harmful patina located at 513, 846, 911, and 974 cm-1 were increased by more than 500 %. This was due to the uniform loading of a large number of Ag NPs on the surface of the nanofiber membrane obtained by reduction for 20 min, and the formation of a large number of hot spots between the oriented nanofibers. This significantly improved the SERS performance of the flexible substrate layer under the joint action with the Ag NPs. These results indicate that the flexible substrate layer can greatly enhance the Raman characteristic peaks of alkali copper chloride and be effectively used for trace analysis of the surface composition of bronze artifacts.

Detection of pesticide residues on flexible and transparent fluorinated polyimide film based on surface-enhanced Raman spectroscopy technology

BACKGROUND

Excessive pesticide residues will seriously endanger human health. The complexity and lag of the current popular analytical methods hinder the timeliness of food safety analysis. Surface-enhanced Raman scattering (SERS) was an ultra-sensitive vibration spectroscopy technology with the advantages of less time cost, non-destructive and semi-quantitative detection, which has attracted much attention in the rapid field detection of pesticide residue. It was clear that we need an efficient and convenient substrate for pesticide residue detection based on SRES technology, which needs to be portable, flexible, transparent and easy to detect irregular object surfaces.

RESULTS

A novel SERS sensor was designed to detect single and multi-component pesticide residues on irregular fruit and vegetable surfaces by in-situ growth of silver nanoparticles on a flexible and transparent fluorinated polyimide (FPI) substrate. Among them, Ag NPs were synthesized by liquid phase reduction method (AgNO3-PVP and NaBH4). The results showed that the detection limit of 1-4 BDT was down to 10-10 mol L-1, the enhancement factor (EF) was up to 1.57 × 107, and relative standard deviation (RSD) was 7.49 %. By this method, tricyclazole solution at a concentration of 0.01 mg L-1 was still detectable by the FPI@Ag SERS substrate. The linear quantification was achieved in the range from 100 mg L-1 to 0.01 mg L-1. Two mixed pesticides, tricyclazole and imazalil, were also successfully distinguished.

SIGNIFICANCE

This represents the formation of a flexible, foldable and transparent substrate for rapid on-site detection. Results can be obtained in <5 min by attaching the substrate to the substance to be tested. And the SERS substrate prepared with high sensitivity, stability, portable and convenient analysis, which provided new ideas for efficient and rapid household food safety detection.

Open nanocavity-assisted Ag@PDMS as a soft SERS substrate with ultra-sensitivity and high uniformity

To achieve high sensitivity and uniformity simultaneously in a surface-enhanced Raman scattering (SERS) substrate, this paper presents the preparation of a flexible and transparent three-dimensional (3D) ordered hemispherical array polydimethylsiloxane (PDMS) film. This is achieved by self-assembling a single-layer polystyrene (PS) microsphere array on a silicon substrate. The liquid-liquid interface method is then used to transfer Ag nanoparticles onto the PDMS film, which includes open nanocavity arrays created by etching the PS microsphere array. An open nanocavity assistant soft SERS sample, "Ag@PDMS," is then prepared. For electromagnetic simulation of our sample, we utilized Comsol software. It has been experimentally confirmed that the Ag@PDMS substrate with silver particles of 50 nm in size is capable of achieving the largest localized electromagnetic hot spots in space. The optimal sample, Ag@PDMS, exhibits ultra-high sensitivity towards Rhodamine 6 G (R6G) probe molecules, with a limit of detection (LOD) of 10^-15 mol/L, and an enhancement factor (EF) of ∼10¹². Additionally, the substrate exhibits a highly uniform signal intensity for probe molecules, with a relative standard deviation (RSD) of approximately 6.86%. Moreover, it is capable of detecting multiple molecules and can perform real detection on non-flat surfaces.

Electrospun composite nanofibers modified with silver nanoparticles for extraction of trace heavy metals from water and rice samples: An highly efficient and reproducible sorbent

Herein, a composite of polyacrylonitrile (PAN)/agar/silver nanoparticles (AgNPs) electrospun nanofibers was fabricated and applied as an efficient sorbent for thin-film micro-extraction (TFME) of five metal ions followed by inductively coupled plasma optical emission spectroscopy (ICP-OES). Incorporating agar into the nanofibers followed by in situ photo-reductive reaction under UV-lamp resulted in highly uniform dispersion of AgNPs in the nanofibers. Under the optimized conditions, agreeable linearity was acquired in the range of 0.5-250.0 ng mL^-1 (R² ≥ 0.9985). The LODs (based on S/N = 3) were attained in the range of 0.2 to 0.5 ng mL^-1. The relative standard deviations (RSDs) were between 4.5% and 5.6% (intra-day, n = 5) and 5.3%-5.9% (inter-day, n = 3) for three sequential days. The developed method was investigated with water and rice samples, and recoveries (93.9-98.0%) indicated that the PAN/agar/AgNPs could be a promising film for the adsorption of heavy metal ions in varied samples.

SERS Assays Based on Electrospun Nanofibers: Preparation and Analytical Applications

Surface-enhanced Raman spectroscopy (SERS) is a powerful tool and an up-to-date method of analytical chemistry due to its high sensitivity and fingerprint recognition capabilities. Nowadays SERS due to its label-free detection capabilities is being actively developed in medical fields, for example in the analysis of biologically important substances in different matrixes, for potential on-site detection of toxic substances, food safety, and so on. To get the SERS signal, it is necessary the presence of plasmonic nanostructures in the SERS substrates. Electrospun nanofibers have been an attractive alternative to SERS-platforms due to the diversity of advantages, including ease of preparation, structure flexibility, and others. In this review, we summarized the methods of plasmonic nanostructures incorporating substrate based on electrospun nanofibers. Also, the analytical application of SERS-active electrospun nanofibers with embedded nanostructures focused on biologically significant molecules is observed in detail. Finally, the future outlook in the application of these substrates in bioanalysis as the most promising area in analytical chemistry is presented.

Electrospun hybrid nanofibers: Fabrication, characterization, and biomedical applications

Nanotechnology is one of the most promising technologies available today, holding tremendous potential for biomedical and healthcare applications. In this field, there is an increasing interest in the use of polymeric micro/nanofibers for the construction of biomedical structures. Due to its potential applications in various fields like pharmaceutics and biomedicine, the electrospinning process has gained considerable attention for producing nano-sized fibers. Electrospun nanofiber membranes have been used in drug delivery, controlled drug release, regenerative medicine, tissue engineering, biosensing, stent coating, implants, cosmetics, facial masks, and theranostics. Various natural and synthetic polymers have been successfully electrospun into ultrafine fibers. Although biopolymers demonstrate exciting properties such as good biocompatibility, non-toxicity, and biodegradability, they possess poor mechanical properties. Hybrid nanofibers from bio and synthetic nanofibers combine the characteristics of biopolymers with those of synthetic polymers, such as high mechanical strength and stability. In addition, a variety of functional agents, such as nanoparticles and biomolecules, can be incorporated into nanofibers to create multifunctional hybrid nanofibers. Due to the remarkable properties of hybrid nanofibers, the latest research on the unique properties of hybrid nanofibers is highlighted in this study. Moreover, various established hybrid nanofiber fabrication techniques, especially the electrospinning-based methods, as well as emerging strategies for the characterization of hybrid nanofibers, are summarized. Finally, the development and application of electrospun hybrid nanofibers in biomedical applications are discussed.

Electrospun composite nanofibers as novel high-performance and visible-light photocatalysts for removal of environmental pollutants: A review

Environmental pollution caused by industries and human manipulations is coming a serious global challenge. On the other hand, the world is facing an energy crisis caused by population growth. Designing solar-driven photocatalysts which are inspired by the photosynthesis of plant leaves is a fantastic solution to use solar energy as green, available, and unlimited energy containing ∼50% visible light for the removal of environmental pollutants. The polymeric and non-polymeric-based electrospun composite nanofibers (NFs) are as innovative photocatalytic candidates which increase photocatalytic activity and transition from UV light to visible light and overcome the aggregation, photocorrosion, toxicity, and hard recycling and separation of the nanosized powder form of photocatalysts. The composite NFs are fabricated easily by either embedding the photocatalytic agents into the NFs during electrospinning or via their decorating on the surface of NFs post-electrospinning. Polyacrylonitrile-based, tungsten trioxide-based, zinc oxide-based, and titanium dioxide-based composite NFs were revealed as the most reported composite NFs. All the lately investigated electrospun composite NFs indicated long-term stability, high photocatalytic efficiency (∼> 80%) within a short time of light radiation (10-430 min), and high stability after several cycles of use. They were applied in various applications including degradation of dyes/antibiotics, water splitting, wastewater treatment, antibacterial usage, etc. The photogenerated species especially holes, O₂^∙-, and ^.OH were mostly responsible for the photocatalytic mechanism and pathway. The electrospun composite NFs have the potential to use in large-scale productions in condition that their thickness and recycling conditions are optimized, and their toxicity and detaching are resolved.

Cotton Textile with Antimicrobial Activity and Enhanced Durability Produced by L-Cysteine-Capped Silver Nanoparticles

Background: In this study, L-cysteine-capped silver nanoparticles (Cys-AgNPs) were successfully linked in a cotton textile, being attached in a covalent way to the cotton fibers via esterification with the hydroxyl groups from the cellulose. The AgNPs were strongly adhered to the fiber surface through coordination bonds with the thiol groups from the L-cys. In addition, they were compared with biogenic silver nanoparticles produced from fungi (bio-AgNPs). Materials and methods: The characterization of the Cys-AgNP and the bio-AgNP solutions were accomplished by UV−visible (UV−Vis), Z-potential, and X-ray diffraction (XRD). After the attachment of the Cys-AgNPs and the bio-AgNPs to the raw cotton, the textile surface was characterized by variable pressure scanning electron microscopy (VP-SEM), energy dispersive X-ray (EDX), and Fourier transform infrared spectroscopy (FT-IR). The antibacterial activity was performed by disk diffusion analysis. Results: The results of the UV−Vis analysis showed the presence of AgNPs in the Cys-AgNPs and the bio-AgNPs solutions, showing the Surface Plasmon resonance (SPR) for the AgNPs among 380–420 nm. In addition, they exhibited a Z-potential of −27 and −24 mV, respectively, with the presence of elemental silver shown by the XRD analysis. The VP-SEM images from the cotton fabrics covered in Cys-AgNPs and bio-AgNPs showed the presence of spherical AgNPs on their surface, and EDX analysis revealed the presence of peaks associated with the presence of Ag, C, and O. Furthermore, FT-IR analysis exhibited peaks associated with the presence of L-cysteine (SH-) and carboxylic acid arising from the esterification reaction among the cellulose from cotton and the carboxylic acid in the L-Cys molecules. Finally, the cotton textile exhibited antibacterial activity against Escherichia coli and Staphylococcus aureus. Conclusions: This study demonstrates the ability of Cys-AgNPs to bind to the cellulose from cotton fabric so as to produce antibacterial fabrics with enhanced durability, opening a wide range of options to be further used in healthcare and other industries.

One-pot biofabrication and characterization of Tara gum/Riceberry phenolics-silver nanogel: A cytocompatible and green nanoplatform with multifaceted biological applications

This work proposed a one-pot green route for the development of a biocompatible Tara gum-Riceberry phenolics‑silver nanosphere hybrid nanocomposite (TG/RiPE-SNG) with manifold biological potentialities. The reaction system comprised of AgNO₃ as nanosilver precursor, Riceberry phenolic extract as the green in situ reductant, and Tara gum as stabilizing and anchoring agent. TG/RiPE-SNG was extensively characterized using UV-vis spectroscopy, FTIR, RAMAN, TEM, FESEM, EDX, DLS/zeta potential, XRD, and TGA analyses. Small, stable, spherical, well-dispersed SNP with an average particle size of 13.01 nm and λ_max of 421 nm were synthesized in situ, and uniformly distributed within the gel-like TG/RiPE composite. The prepared nanocomposite demonstrated superior antibacterial properties (MIC of 12.5 μg/mL) against S. aureus and S. epidermidis compared to the gum or extract. Additionally, TG/RiPE-SNG exhibited strong light barrier, tyrosinase inhibitory and antioxidant functionalities. TG/RiPE-SNG also exhibited high stability at different pH and was more thermally stable relative to the plain TG/RiPE composite. Furthermore, TG/RiPE-SNG showed good biocompatibility towards mouse L929 fibroblasts and rat erythrocytes. The obtained findings revealed a simple, benign, and inexpensive approach using only natural ingredients for the preparation of gum-based biopolymer-nanosilver hybrid nanocomposite and underscored the strong attributes of TG/RiPE-SNP as a nanomaterial with desirable biomedical potentials.

Adjustable color response during plasmon resonance by monochromatic light irradiation

A combination of plasmonic nanoparticles with a semiconductor is a feasible approach to realize multiple color exhibitions. The phenomenon is based on plasmon-driven charge separation between electrons and metal ions, but suitable only for light excitation with different wavelengths. Here, we introduce a color-adjustable method under monochromatic light irradiation. A smart strategy is proposed to construct sandwich structures of a hydrogel coating layer, thermally deposited Ag nanoparticles, and mesoporous TiO₂ matrices. The contacting mode of TiO₂ and nano-Ag at the Schottky interface is strongly dependent on the pore morphology of the oxide. Surface and interface plasmon resonances result in sample color switching from cyan to green and from brown to purple, respectively. The color response ability is further controlled by hydrogel coating, besides the exciting light wavelength. This Letter paves a bright way for colorful displays and information encryption.

Facile One-Step Deposition of Ag Nanoparticles on SiO2 Electrospun Nanofiber Surfaces for Label-Free SERS Detection and Antibacterial Dressing

The fabrication of highly active and free-standing surface-enhanced Raman scattering (SERS) substrates in a simple and low-cost manner has been a crucial and urgent challenge in recent years. Herein, SiO₂ nanofiber substrates modified with size-tunable Ag nanoparticles were prepared by the combination of electrospinning and in situ chemical reduction. The results demonstrate the presence and uniform adsorption of Ag nanoparticles on the SiO₂ matrix surface. The free-standing composite nanofibrous substrates show high-performance SERS response toward 4-mercaptophenol and 4-mercaptobenzoic acid, and the detection limit can be as low as 10^-10 mol/L. Most importantly, the as-prepared substrate as a versatile SERS platform can realize label-free detection of bio-macromolecules of bacteria, i.e., Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli). Furthermore, the substrates also possess outstanding antibacterial activities against S. aureus and E. coli. Briefly, the significance of this study is that size-tunable Ag nanoparticles can be decorated on SiO₂ nanofiber surfaces with triethanolamine as a bridging and reducing agent through a one-pot reaction, and the as-prepared nanofibrous membranes are expected to act as a candidate for label-free SERS detection as well as antibacterial dressing.

Design, Fabrication and Applications of Electrospun Nanofiber-Based Surface-Enhanced Raman Spectroscopy Substrate

Surface-enhanced Raman spectroscopy (SERS) is an advanced and powerful analysis tool. Due to the advantages of high sensitivity, high resolution, and nondestructive testing, it has been widely used in physics, chemistry, material science and other fields. In recent years, substantial progress has been made in developing flexible platforms for the design and fabrication of SERS substrates. One important kind of the flexible platforms is based on electrospun nanofibers. Electrospun nanofibers not only have unique advantages such as easy preparation, high porosity and large specific surface area, but also can increase the number of hotspots when combined with precious metal nanomaterials, thereby enhancing the SERS signal and expanding the application scope. In this review, we firstly focus on two strategies for the fabrication of metal nanostructure decorated in/on the electrospun nanofibers, namely in-situ and ex-situ. Then the applications of these SERS substrates in the fields of quantitative analysis, monitoring chemical reactions and recyclable detection are introduced in detail. Finally, the challenges as well as perspectives are presented to offer a guideline for the future exploration of these SERS substrates. We expect that it will provide new inspiration for the development of electrospun nanofiber-based SERS substrates.

Carbonic Anhydrase Carrying Electrospun Nanofibers for Biocatalysis Applications

BACKGROUND

Enzymes are efficient biocatalysis that catalysis a large number of reactions due to their chemical, regional, or stereo specifities and selectivity. Their usage in bioreactor or biosensor systems has great importance. Carbonic anhydrase enzyme catalyzes the interconversion between carbon dioxide and water and the dissociated ions of carbonic acid. In organisms, the carbonic anhydrase enzyme has crucial roles connected with pH and CO₂ homeostasis, respiration, and transport of CO₂/bicarbonate, etc. So, immobilization of the enzyme is important in stabilizing the catalyst against thermal and chemical denaturation in bioreactor systems when compared to the free enzyme that is unstable at high temperatures and extreme pH values, as well as in the presence of organic solvents or toxic reagents. Nano-scale composite materials have attracted considerable attention in recent years, and electrospinning based all-nanocomposite materials have a wide range of applications. In this study, electrospun nanofibers were fabricated and used for the supporting media for carbonic anhydrase enzyme immobilization to enhance the enzyme storage and usage facilities.

OBJECTIVE

In this article, our motivation is to obtain attractive electrospun support for carbonic anhydrase enzyme immobilization to enhance the enzyme reusability and storage ability in biocatalysis applications.

METHODS

In this article, we propose electrospun nanofibers for carbonic anhydrase carrying support for achieving our aforementioned object. In the first part of the study, agar with polyacrylonitrile (PAN) nanofibers was directly fabricated from an agar-PAN mixture solution using the electrospinning method, and fabricated nanofibers were cross-linked via glutaraldehyde (GA). The morphology, chemical structure, and stability of the electrospun nanofibers were characterized. In the second part of the study, the carbonic anhydrase enzyme was immobilized onto fabricated electrospun nanofibers. Then, enzyme activity, the parameters that affect enzyme immobilization such as pH, enzyme amount, immobilization time, etc. and reusability were investigated.

RESULTS

When the scanning electron microscopy (SEM) and Fourier-transform infrared spectroscopy (FTIR) analysis results are combined in the characterization process of the synthesized electrospun nanofibers, the optimum cross-linking time is found to be 8 hours using 5% glutaraldehyde cross-linking agent. Then, thermal stability measurements showed that the thermal stability of electrospun nanofibers has an excellent characteristic for biomedical applications. The optimum temperature value was found 37°C, pH 8 was determined as an optimum pH, and 100 ppm carbonic anhydrase enzyme concentration was found to be optimum enzyme concentration for the carbonic anhydrase enzyme immobilization. According to the kinetic data, carbonic anhydrase immobilized electrospun nanofibers acted as a biocatalyst in the conversion of the substrate to the product in 83.98%, and immobilized carbonic anhydrase enzyme is reusable up to 9 cycles in biocatalysis applications.

CONCLUSION

After applying the framework, we get a new biocatalysis application platform for carbonic anhydrase enzyme. Electrospun nanofibers were chosen as the support material for enzyme immobilization. By using this approach, the carbonic anhydrase enzyme could easily be used in the industrial area by cost-effective advantageous aspects.

Plasmonic tunable Ag-coated gold nanorod arrays as reusable SERS substrates for multiplexed antibiotics detection

Antibiotic contaminants in aqueous media pose a serious threat to human and ecological environments. Therefore, it is necessary to develop robust strategies to detect antibiotic residues. For this purpose, a self-assembly and in situ electrochemical reduction method is utilized to tailor silver nanoparticles (AgNPs)-coated GNRs (AgNPs/GNRs) large-scale vertical arrays. These AgNPs/GNRs arrays exhibit outstanding surface-enhanced Raman scattering (SERS) activities because of abundant Raman hot-spots among the adjacent AgNPs and GNRs, but also excellent stability and reproducibility due to the close-packed arrayed nanostructure. These remarkable features validate this arrayed substrate for high-sensitivity 4-aminothiophenol analysis with a detection limit of 0.35 pM and self-cleaning via electrochemical stripping of the adsorbed analytes and AgNPs from the GNRs arrays, therefore realizing renewable SERS applications. Moreover, the distinct SERS performance of AgNPs/GNRs arrays is verified via the analysis of multiplexed antibiotics at tens of picomolar level and no apparent changes of SERS activities are observed when recyclability is explored. The result demonstrates that the proposed AgNPs/GNRs arrays provide a novel strategy for avoiding conventional, disposable SERS substrates, as well as expanding SERS applications for simultaneous sensing and stripping of environmental contaminants.

The current state of the art of plasmonic nanofibrous mats as SERS substrates: design, fabrication and sensor applications

Surface-enhanced Raman scattering (SERS) is a widely used analytical tool that allows molecular fingerprint-based ultra-sensitive detection through an enhanced electromagnetic field generated by plasmonic metal nanoparticles (MNPs) by virtue of their localized surface plasmon resonance (LSPR). Although significant progress has been made in the design and fabrication of a variety of SERS substrates, MNP-decorated electrospun nanofibrous (NF) mats have attracted much attention due to their unique nanoscale structural and functional properties. This review focuses on the current state of the art in the fabrication of plasmonic NF mats with the main focus on the pre-mix, in situ, and ex situ approaches. The characteristic functional advantages and limitations of these strategies are also highlighted, which might be helpful for the research community when adopting a suitable approach. The potential of these plasmonic NF mats as a SERS-active optical sensor substrate, and their performance parameters such as the limit of detection, analytical range, and enhancement factor, and real-world applications are also discussed. The summary and futuristic discussion in this review might be of significant value in developing plasmonic NF mat-based SERS-active point-of-care diagnostic chips for a wide range of applications.

Loading of Au/Ag Bimetallic Nanoparticles within and Outside of the Flexible SiO2 Electrospun Nanofibers as Highly Sensitive, Stable, Repeatable Substrates for Versatile and Trace SERS Detection

In this paper, we propose a facile and cost-effective electrospinning technique to fabricate surface-enhanced Raman scattering (SERS) substrates, which is appropriate for multiple analytes detection. First of all, HAuCl4∙3H2O was added into the TEOS/PVP precursor solution, and flexible SiO2 nanofibers incorporated with gold nanoparticles (SiO2@Au) were prepared by electrospinning and calcination. Subsequently, the nanofibrous membranes were immersed in the tannic acid and 3-aminopropyltriethoxysilane solution for surface modification through Michael addition reaction. Finally, the composite nanofibers (Ag@T-A@SiO2@Au) were obtained by the in-situ growth of Ag nanoparticles on the surfaces of nanofibers with tannic acid as a reducing agent. Due to the synergistic enhancement of Au and Ag nanoparticles, the flexible and self-supporting composite nanofibrous membranes have excellent SERS properties. Serving as SERS substrates, they are extremely sensitive to the detection of 4-mercaptophenol and 4-mercaptobenzoic acid, with an enhancement factor of 108. Moreover, they could be utilized to detect analytes such as pesticide thiram at a low concentration of 10-8 mol/L, and the substrates retain excellent Raman signals stability during the durability test of 60 days. Furthermore, the as-fabricated substrates, as a versatile SERS platform, could be used to detect bacteria of Staphylococcus aureus without a specific and complicated bacteria-aptamer conjugation procedure, and the detection limit is up to 103 colony forming units/mL. Meanwhile, the substrates also show an excellent repeatability of SERS response for S. aureus organelles. Briefly, the prime novelty of this work is the fabrication of Au/Ag bimetallic synergetic enhancement substrates as SERS platform for versatile detection with high sensitivity and stability.

A Facile Method for the Fabrication of Silver Nanoparticles Surface Decorated Polyvinyl Alcohol Electrospun Nanofibers and Controllable Antibacterial Activities

Polyvinyl alcohol (PVA) electrospun nanofibers (NFs) are ideal carriers for loading silver nanoparticles (Ag NPs) serving as antibacterial materials. However, it is still a challenge to adjust the particles size, distribution, and loading density via a convenient and facile method in order to obtain tunable structure and antimicrobial activities. In this study, Ag NPs surface decorated PVA composite nanofibers (Ag/PVA CNFs) were fabricated by the solvothermal method in ethylene glycol, which plays the roles of both reductant and solvent. The morphology and structure of the as-fabricated Ag/PVA CNFs were characterized by scanning electron microscopy, transmission electron microscopy, selected area electron diffraction, X-ray diffraction, UV-visible spectroscopy, and Fourier transform infrared spectroscopy. Ag NPs had an average diameter of 30 nm, the narrowest size distribution and the highest loading density were successfully decorated on the surfaces of PVA NFs, at the AgNO3 concentration of 0.066 mol/L. The antibacterial properties were evaluated by the methods of absorption, turbidity, and growth curves. The as-fabricated Ag/PVA hybrid CNFs exhibit excellent antimicrobial activities with antibacterial rates over 98%, especially for the sample prepared with AgNO3 concentration of 0.066 mol/L. Meanwhile, the antibacterial effects are more significant in the Gram-positive bacteria of Staphylococcus aureus (S. aureus) than the Gram-negative bacteria of Escherichia coli (E. coli), since PVA is more susceptive to S. aureus. In summary, the most important contribution of this paper is the discovery that the particles size, distribution, and loading density of Ag NPs on PVA NFs can be easily controlled by adjusting AgNO3 concentrations, which has a significant impact on the antibacterial activities of Ag/PVA CNFs.

Towards the Enhancement in Photocatalytic Performance of Ag3PO4 Nanoparticles through Sulfate Doping and Anchoring on Electrospun Nanofibers

Present work reports the enhancement in photocatalytic performance of Ag3PO4 nanoparticles through sulfate doping and anchoring on Polyacrylonitrile (PAN)-electrospun nanofibers (SO42--Ag3PO4/PAN-electrospun nanofibers) via electrospinning followed by ion-exchange reaction. Morphology, structure, chemical composition, and optical properties of the prepared sample were characterized using XRD, FESEM, FTIR, XPS, and DRS. The anchoring of SO42--Ag3PO4 nanoparticles on the surface of PAN-electrospun nanofibers was evidenced by the change in color of the PAN nanofibers mat from white to yellow after ion-exchange reaction. FESEM analysis revealed the existence of numerous SO42--Ag3PO4 nanoparticles on the surface of PAN nanofibers. Photocatalytic activity and stability of the prepared sample was tested for the degradation of Methylene blue (MB) and Rhodamine B (RhB) dyes under visible light irradiation for three continuous cycles. Experimental results showed enhanced photodegradation activity of SO42--Ag3PO4/PAN-electrospun nanofibers compared to that of sulfate undoped sample (Ag3PO4/PAN-electrospun nanofibers). Doping of SO42- into Ag3PO4 crystal lattice could increase the photogenerated electron-hole separation capability, and PAN nanofibers served as support for nanoparticles to prevent from agglomeration.

A new and facile nanosilver SPR colored method for ultratrace arsenic based on aptamer regulation of Au-doped carbon dot catalytic amplification

Here, Au-doped carbon dots (CD_Au) nanosols with good stability were prepared by hydrothermal reaction method. We found that CD_Au can efficiently catalyze the nanoreaction of reducing AgNO₃ by glucose, and at 420 nm，the reaction products of yellow spherical silver nanosol exhibit an intense surface plasmon resonance (SPR) absorption peak. The nucleic acid aptamers (Apt) can be adsorbed on the surface of carbon dots, so that their catalytic activity was suppressed, the nanosilvers were reduced, the solution color becomes lighter, and the Abs value was weakened. When As³⁺ was added, it forms a stable conjugate with the Apt, releases free carbon dots, restored its catalytic activity, and the color and Abs signals enhanced linearly. Based on the Apt regulation and the catalytic amplification effect of CD_Au on AgNO₃-glucose, a new extremely sensitive SPR spectrophotometric method for the determination of arsenic ion content of 0.025-0.75 μg/L was established, and the detection limit of As³⁺ is 0.01 μg/L.

Enhanced Antibacterial Property of Sulfate-Doped Ag3PO4 Nanoparticles Supported on PAN Electrospun Nanofibers

Heterojunction nanofibers of PAN decorated with sulfate doped Ag₃PO₄ nanoparticles (SO₄²⁻-Ag₃PO₄/PAN electrospun nanofibers) were successfully fabricated by combining simple and versatile electrospinning technique with ion exchange reaction. The novel material possessing good flexibility could exhibit superior antibacterial property over sulfate undoped species (Ag₃PO₄/PAN electrospun nanofibers). FESEM, XRD, FTIR, XPS and DRS were applied to characterize the morphology, phase structure, bonding configuration, elemental composition, and optical properties of the as fabricated samples. FESEM characterization confirmed the successful incorporation of SO₄²⁻-Ag₃PO₄ nanoparticles on PAN electrospun nanofibers. The doping of SO₄²⁻ ions into Ag₃PO₄ crystal lattice by replacing PO₄³⁻ ions can provide sufficient electron-hole separation capability to the SO₄²⁻-Ag₃PO₄/PAN heterojunction to generate reactive oxygen species (ROS) under visible light irradiation and enhances its antibacterial performance. Finally, we hope this work may offer a new paradigm to design and fabricate other types of flexible self-supporting negative-ions-doped heterojunction nanofibers using electrospinning technique for bactericidal applications.

Sonication-Assisted Synthesis of Bimetallic Hg/Pd Alloy Nanoparticles for Catalytic Reduction of Nitrophenol and its Derivatives

In this article, we report a facile approach for the synthesis of an inexpensive catalyst of bimetallic Hg/Pd alloys comprising nanoparticles with various structures using a unique ultrasonic reaction that is conducted without the use of any reducing agent. The nanoparticles of Hg/Pd alloys (HgPd and Hg₂Pd₅) were achieved for the first time by sonicating an aqueous solution of Palladium (II) nitrate with metallic liquid mercury, as evidenced by XRD. EDS further confirmed the presence of Pd and Hg elements in the alloy. The surface morphology and structure of the nanoparticles have been systematically investigated by HRSEM, HRTEM and SAED pattern. In order to explore the catalytic activity of the as-synthesized nanoalloys, the catalytic reduction of 4-nitrophenol and a few other nitrophenol derivatives were investigated. Excellent catalytic activity was obtained for Hg/Pd (1:1) alloy, and the rate constant for the reduction of 4-NP with Hg/Pd at room temperature was found to be 58.4 × 10^-3 s^-1, which is possibly the highest ever reported. The catalyst exhibited superior stability and reusability when compared with those reported in the literature for other catalysts based on noble metals.

A Review on Surface-Enhanced Raman Scattering

Surface-enhanced Raman scattering (SERS) has become a powerful tool in chemical, material and life sciences, owing to its intrinsic features (i.e., fingerprint recognition capabilities and high sensitivity) and to the technological advancements that have lowered the cost of the instruments and improved their sensitivity and user-friendliness. We provide an overview of the most significant aspects of SERS. First, the phenomena at the basis of the SERS amplification are described. Then, the measurement of the enhancement and the key factors that determine it (the materials, the hot spots, and the analyte-surface distance) are discussed. A section is dedicated to the analysis of the relevant factors for the choice of the excitation wavelength in a SERS experiment. Several types of substrates and fabrication methods are illustrated, along with some examples of the coupling of SERS with separation and capturing techniques. Finally, a representative selection of applications in the biomedical field, with direct and indirect protocols, is provided. We intentionally avoided using a highly technical language and, whenever possible, intuitive explanations of the involved phenomena are provided, in order to make this review suitable to scientists with different degrees of specialization in this field.

In situ detection of trace pollutants: a cost-effective SERS substrate of blackberry-like silver/graphene oxide nanoparticle cluster based on quick self-assembly technology

To realize fast detection of trace hazardous chemicals, a SERS substrate with the structure of a blackberry-like silver/graphene oxide nanoparticle cluster (Ag/GO NPC) has been designed and prepared through a quick capillarity-assistant self-assembly technology in this paper. Benefitting from the abundant "hot spots" and active oxygen sites brought by this Ag/GO NPC, the substrate shows good Raman performance for malachite green (MG), a common abusive germicide in aquaculture, with lowest limit of detection below 0.1 µg/L (3.48 × 10^-10 mol/L). Detailed analyses are taken on both the formation process and enhancement mechanism of this SERS substrate, and the finite-difference time-domain simulations are utilized as well to prove our hypotheses. Further constructing this structure on polyethylene terephthalate (PET) film, a translucent flexible SERS substrate can be obtained, realizing a fast in situ detection of trace MG in the fishpond subsequently. In consideration of the facile preparation process, good SERS enhancement and affordable materials (PET, Cu, Ag and GO, etc.), this substrate presents high cost performance and a promising application prospect.

Fabrication of Electrospun Polymer Nanofibers with Diverse Morphologies

Fiber structures with nanoscale diameters offer many fascinating features, such as excellent mechanical properties and high specific surface areas, making them attractive for many applications. Among a variety of technologies for preparing nanofibers, electrospinning is rapidly evolving into a simple process, which is capable of forming diverse morphologies due to its flexibility, functionality, and simplicity. In such review, more emphasis is put on the construction of polymer nanofiber structures and their potential applications. Other issues of electrospinning device, mechanism, and prospects, are also discussed. Specifically, by carefully regulating the operating condition, modifying needle device, optimizing properties of the polymer solutions, some unique structures of core⁻shell, side-by-side, multilayer, hollow interior, and high porosity can be obtained. Taken together, these well-organized polymer nanofibers can be of great interest in biomedicine, nutrition, bioengineering, pharmaceutics, and healthcare applications.

Electrospun flexible poly(bisphenol A carbonate) nanofibers decorated with Ag nanoparticles as effective 3D SERS substrates for trace TNT detection

A flexible 3D hybrid PC/Ag surface-enhanced Raman scattering (SERS) substrate was fabricated through the combination of electrospinning and in situ chemical reduction. Due to the rough surface morphology and the intricate 3D structure, a high density of Raman "hotspots" was formed at the junctions of cross-linked nanofibers, resulting in excellent sensitivity to a probe molecule (4-aminothiophenol). The nanofibers were modified with l-cysteine to capture TNT molecules by the formation of a Meisenheimer complex, after which positively charged 4-ATP-labelled AgNPs were introduced to the system, which both generated more hotspots and led to a linear relationship between the TNT concentration and the SERS intensity of the labelled molecules. As a result, a good linear response ranging from 10^-8 to 10^-12 M was achieved, and the detection limit for TNT was as low as 2.05 × 10^-13 M. This strategy demonstrates an ultra-sensitive approach for the detection of trace amounts of TNT, and a promising method for the detection of many other analogous explosives.

Colorimetric and visual detection of mercury(II) based on the suppression of the interaction of dithiothreitol with agar-stabilized silver-coated gold nanoparticles

A colorimetric and visual method is described for the determination of mercury(II) ion. A gel consisting of agar-stabilized silver-coated gold nanoparticles (Au@Ag NPs) was prepared. The reaction with dithiothreitol (DTT) via thiol-Ag chemistry results in an orange to purple color change of the gel. However, in the presence of Hg(II), the reaction of DTT with the silver shells is suppressed due to the strong thiophilicity of Hg(II). The color of the gel changes from purple to red to orange in the presence of increasing concentrations of Hg(II). The Au@Ag NPs therefore are a viable optical probe for Hg(II) which can be detected in concentration as low as 78 nM via dual-wavelength ratiometric absorbance (A₃₉₀/A₅₂₀), and at 1 μM levels with bare eyes. The use of agar as a support is mandatory to prevent the aggregation of the NPs and also improves selectivity. The method was applied to the analysis of spiked samples, and recoveries ranged between 96.3 and 104%. The assay is easy, inexpensive, and in our perception represents an attractive tool for on-site visual detection of Hg(II). Graphical abstract Schematic of the assay. With increasing concentrations of Hg(II), the oxidative etching of silver shells caused by dithiothreitol (DTT) is gradually inhibited, and the color of agar-stabilized Au@Ag NP gel varies from purple to red, and finally to orange. This can be used for visual detection of Hg(II).

A Sensitive Gold Nanoplasmonic SERS Quantitative Analysis Method for Sulfate in Serum Using Fullerene as Catalyst

Fullerene exhibited strong catalysis of the redox reaction between HAuCl₄ and trisodium citrate to form gold nanoplasmon with a strong surface-enhanced Raman scattering (SERS) effect at 1615 cm^&minus;1 in the presence of Vitoria blue B molecule probes. When fullerene increased, the SERS peak enhanced linearly due to formation of more AuNPs as substrate. Upon addition of Ba²⁺, Ba²⁺ ions adsorb on the fullerene surface to inhibit the catalysis of fullerene that caused the SERS peak decreasing. Analyte SO₄^2&minus; combined with Ba²⁺ to form stable BaSO₄ precipitate to release free fullerene that the catalysis recovered, and the SERS intensity increased linearly. Thus, a new SERS quantitative analysis method was established for the detection of sulfate in serum samples, with a linear range of 0.03⁻3.4 &mu;M.

Plasma-treated electrospun nanofibers as a template for the electrostatic assembly of silver nanoparticles

Silver nanoparticles assembled on a plasma treated electrospun nanofiber membrane could show excellent SERS effect.

Combination of a graphene SERS substrate and magnetic solid phase micro-extraction used for the rapid detection of trace illegal additives

Surface enhanced Raman scattering (SERS) is an ultra-sensitive spectroscopy technique, which can provide rich structural information for a great number of molecules, while solid phase micro-extraction (SPME) is an efficient method for sample pretreatment in analytical chemistry, particularly in a micro-system.

Surface-engineered quantum dots/electrospun nanofibers as a networked fluorescence aptasensing platform toward biomarkers

A membrane-based fluorescent sensing platform is a facile, point-of-care and promising technique in chemo/bio-analytical fields. However, the existing fluorescence sensing films for cancer biomarkers have several problems, with dissatisfactory sensitivity and selectivity, low utilization of probes encapsulated in films as well as the tedious design of membrane structures. In this work, a novel fluorescence sensing platform is fabricated by bio-grafting quantum dots (QDs) onto the surface of electrospun nanofibers (NFs). The aptamer integrated into the QDs/NFs can result in high specificity for recognizing and capturing biomarkers. Partially complementary DNA-attached gold nanoparticles (AuNPs) are employed to efficiently hybridize with the remaining aptamer to quench the fluorescence of QDs by nanometal surface energy transfer (NSET) between them both, which are constructed for prostate specific antigen (PSA) assay. Taking advantage of the networked nanostructure of aptamer-QDs/NFs, the fluorescent film can detect PSA with high sensitivity and a detection limit of 0.46 pg mL^-1, which was further applied in real clinical serum samples. Coupling the surface grafted techniques to the advanced network nanostructure of electrospun NFs, the proposed aptasensing platform can be easily extended to achieve sensitive and selective assays for other biomarkers.

Structure-Activity Relationship of Membrane-Targeting Cationic Ligands on a Silver Nanoparticle Surface in an Antibiotic-Resistant Antibacterial and Antibiofilm Activity Assay

To explore the structure-activity relationship of membrane-targeting cationic ligands on a silver nanoparticle surface in an antibiotic-resistant antibacterial and antibiofilm activity assay, a series of functionalized silver nanocomposites were synthesized. Tuning the structural configuration, molecular weight, and side-chain length of the cationic ligands on the nanoparticle surface provided silver nanocomposites with effective antibacterial activity against both antibiotic-resistant Gram-negative and Gram-positive bacteria, including bacterial biofilms. These silver nanocomposites did not trigger hemolytic activity. Significantly, the bacteria did not develop resistance to the obtained nanocomposites even after 30 generations. A study of the antibacterial mechanism confirmed that these nanocomposites could irreversibly disrupt the membrane structure of bacteria and effectively inhibit intracellular enzyme activity, ultimately leading to bacterial death. The silver nanocomposites (64 μg/mL) could eradicate 80% of an established antibiotic-resistant bacterial biofilm. The strong structure-activity relationship toward antibacterial and antibiofilm activity suggests that variations in the conformational property of the functional ligand could be valuable in the discovery of new nano-antibacterial agents for treating pathogenic bacterial infections.

An enzyme-induced Au@Ag core-shell nanoStructure used for an ultrasensitive surface-enhanced Raman scattering immunoassay of cancer biomarkers

Early detection of cancer is helpful for the control and prevention of diseases. Due to the low content of cancer biomarkers in the early disease phases, however, an ultrasensitive and selective method is critical. In this contribution, an ultrasensitive surface-enhanced Raman scattering (SERS) immunoassay is newly developed with the principle of introducing a common enzyme-induced deposition (EID) reaction to coat a silver layer on the surface of gold nanoparticles and to form a core-shell nanostructure of Au@Ag. By using alkaline phosphatase (ALP) to dephosphorylate its substrate, 2-phospho-l-ascorbic acid trisodium salt (AAP), to form vitamin C, silver ions could be reduced into silver atoms and coated on the surface of the AuNPs; a greatly enhanced SERS signal was then obtained. As a proof of concept, α-fetoprotein (AFP) was detected as a target, which is a biomarker of liver cancer. Excellent analytical performance of the SERS immunoassay could be achieved in the range from 0.5 to 100 pg mL^-1 with a limit of detection of 0.081 pg mL^-1 (3σ). Identical results could be obtained by using the newly proposed SERS immunoassay for the clinical detection of AFP in serum samples of patients to those clinically obtained by chemiluminescence immunoassays, demonstrating the potential applications of the developed method in clinical diagnosis.

Electrospun Nanofibers Made of Silver Nanoparticles, Cellulose Nanocrystals, and Polyacrylonitrile as Substrates for Surface-Enhanced Raman Scattering

Nanofibers with excellent activities in surface-enhanced Raman scattering (SERS) were developed through electrospinning precursor suspensions consisting of polyacrylonitrile (PAN), silver nanoparticles (AgNPs), silicon nanoparticles (SiNPs), and cellulose nanocrystals (CNCs). Rheology of the precursor suspensions, and morphology, thermal properties, chemical structures, and SERS sensitivity of the nanofibers were investigated. The electrospun nanofibers showed uniform diameters with a smooth surface. Hydrofluoric (HF) acid treatment of the PAN/CNC/Ag composite nanofibers (defined as p-PAN/CNC/Ag) led to rougher fiber surfaces with certain pores and increased mean fiber diameters. X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS) results confirmed the existence of AgNPs that were formed during heat and HF acid treatment processes. In addition, thermal stability of the electrospun nanofibers increased due to the incorporation of CNCs and AgNPs. The p-PAN/CNC/Ag nanofibers were used as a SERS substrate to detect p-aminothiophenol (p-ATP) probe molecule. The results show that this substrate exhibited high sensitivity for the p-ATP probe detection.

Functional Silver Nanoparticle as a Benign Antimicrobial Agent That Eradicates Antibiotic-Resistant Bacteria and Promotes Wound Healing

With the increased prevalence of antibiotic-resistant bacteria infections, there is a pressed need for innovative antimicrobial agent. Here, we report a benign ε-polylysine/silver nanoparticle nanocomposite (EPL-g-butyl@AgNPs) with polyvalent and synergistic antibacterial effects. EPL-g-butyl@AgNPs exhibited good stability in aqueous solution and effective antibacterial activity against both Gram-negative (P. aeruginosa) and Gram-positive (S. aureus) bacteria without emergence of bacterial resistance. Importantly, the nanocomposites eradicated the antibiotic-resistant bacteria without toxicity to mammalian cells. Analysis of the antibacterial mechanism confirmed that the nanocomposites adhered to the bacterial surface, irreversibly disrupted the membrane structure of the bacteria, subsequently penetrated cells, and effectively inhibited protein activity, which ultimately led to bacteria apoptosis. Notably, the nanocomposites modulated the relative level of CD3⁺ T cells and CD68⁺ macrophages and effectively promoted infected wound healing in diabetic rats. This work improves our understanding of the antibacterial mechanism of AgNPs-based nanocomposites and offers guidance to activity prediction and rational design of effective antimicrobial nanoparticles.