One-step facile solvothermal synthesis of copper ferrite-graphene composite as a high-performance supercapacitor material

A review on synthesis, capping and applications of superparamagnetic magnetic nanoparticles

Magnetic nanoparticles (MNPs) have garnered significant attention from researchers due to their numerous technologically significant applications in diverse fields, including biomedicine, diagnostics, agriculture, optics, mechanics, electronics, sensing technology, catalysis, and environmental remediation. The superparamagnetic nature of MNP is exploited for many applications and remains fascinating to study many fundamental phenomena. The uniqueness of this review is that it gives an in-depth review of different synthesis approaches adopted for preparing magnetic nanoparticles and nanoparticle formation mechanisms, functionalizing them with different capping agents, and applying different functionalized magnetic nanoparticles. The important synthesis techniques covered include coprecipitation, microwave-assisted, sonochemical, sol-gel, microemulsion, hydrothermal/solvothermal, thermal decomposition, and mechano-chemical synthesis. Further, the advantages and disadvantages of each technique are discussed, and tables show important results of prepared particles. Other aspects covered in this review are the dispersion of magnetic nanoparticles in the continuous matrix, the influence of surface capping on high-temperature thermal stability, the long-term stability of ferrofluids, and applications of functionalized magnetic nanoparticles. For effective utilization of the ferrite nanoparticles, it is essential to formulate thermally and colloidally stable magnetic nanoparticles with desired magnetic properties. Capping enhances the phase transition temperature and long-term colloidal stability. Magnetic nanoparticles capped or functionalized with specific binding species, specific components like drugs, or other functional groups make them suitable for applications in biotechnology/biomedicine. Recent studies reveal the tremendous scope of MNPs in therapeutics and theranostics. The requirements for nanoparticle size, morphology, and physio-chemical properties, especially magnetic properties, functionalization, and stability, vary with applications. There are also challenges for precise size control and the cost-effective production of nanoparticles in large quantities. The review should be an ideal material for researchers working on magnetic nanomaterials and an excellent reference for freshers.

CuFe2O4/lignin-based carbon composited photothermal and photodynamic agents for synergetic antibacterial therapy

Bacterial infection has become the second leading cause of death in the world. Exploring a new highly antibacterial catalyst to replace traditional antibacterial agent is crucial for the society development of human beings. In this study, CuFe2O4/Lg-based carbon composited catalysts were rationally constructed by facile hydrothermal method. Lignin-derived carbon with enormous oxygen-containing functional group was beneficial to anchor CuFe2O4 nanoparticles. The close contact interface between CuFe2O4 and Lignin-based carbon material was expected to extend the range of optical absorption and promote the separation and transportation of photogenerated carriers. Under NIR (980 nm, 1.5 W/cm2) light irradiation, the as-prepared CuFe2O4/Lg (20 μg/mL) exhibited excellent photo/photothermal synergetic in vitro (against Escherichia coli and Staphylococcus aureus) and in vivo (against Staphylococcus aureus-infected mouse wound model) antibacterial performance. Furthermore, the cell count assay kit 8 (CCK-8 kit) demonstrated the good biocompatibility of this material. On the basis of the experimental results, a possible antibacterial mechanism based on the synergetic photothermal and photodynamic therapies was proposed. This work presented a lignin- derived carbon-based highly efficient antibacterial disinfection agent with desirable biosafety.

Hybrid Mesoporous Carbon/Copper Ferrite Electrode for Asymmetric Supercapacitors

Asymmetric supercapacitors (ASCs) with two dissimilar electrodes are known to exhibit relatively moderate energy and power densities. If electrodes derived from earth-abundant materials or renewable resources such as lignocellulosic biomass (LCB) are used for fabrication, energy storage systems are expected to become less expensive and more sustainable. Hybrid electrode materials have advantages such as higher surface area, better chemical stability, and superior energy density. This study reports on the synthesis of a novel hybrid electrode material containing porous carbon (POC) and copper ferrite, which is designated as POC@Cu-ferrite, and its electrochemical performance in ASC configuration. Corn stover derived hydrochar is utilized for the sol-gel synthesis of POC@Cu-ferrite hybrid material using earth-abundant Cu and Fe-based precursors. This material is characterized using X-ray diffraction (XRD), Raman spectroscopy, Brunauer-Emmett-Teller (BET) surface area analyzer, and scanning and transmission electron microscopy (SEM/TEM). As-synthesized Cu-ferrite is found to contain 89.2% CuFe2O4 and 10.8% Fe2O3, whereas other phases such as Fe3O4, CuFeO2, and CuO are observed for the POC@Cu-ferrite. BET-specific surface area (SSA) and pore volume of POC@Cu-ferrite are observed as 1068 m2/g and 0.72 cm3/g, respectively. POC@Cu-ferrite hybrid electrode is used with POC opposite electrode to fabricate ASC, which is tested using Gamry G-300 potentiostat/galvanostat/ZRA to obtain cyclic voltammetry (CV) profiles and galvanostatic charge-discharge (GCD) plots. ASC is also prepared using Cu-ferrite and POC materials and its specific capacitance and stability are compared with ASCs prepared with POC@Cu-ferrite and POC or graphene nanoplatelets (GNPs) electrodes. POC@Cu-ferrite hybrid electrode is found to be superior with a 2-fold higher capacitance and significant electrochemical stability over 100 GCD cycles as compared to the Cu-ferrite electrode.

Hydrothermal synthesis of spindle structure copper ferrite-graphene oxide nanocomposites for enhanced photocatalytic dye degradation and in-vitro antibacterial activity

In this study, a one-step hydrothermal approach was used to make pure magnetic copper ferrite (CuFe2O4) and copper ferrite-graphene oxide (CuFe2O4-rGO) nanocomposites (NCs) and spinel structure CuFe2O4 with a single phase of tetragonal CuFe2O4-rGO-NCs was confirmed by the XRD. Then, characterization of CuFe2O4-rGO-NCs was done using ng Raman spectroscopy, FT-IR, TGA-DTA, EDS, SEM, and TEM. The synthesized NCs was exposed to UV light to evaluate its photocatalytic activity for the degradation of methylene blue (MB) and rhodamine B (RhB) with CuFe2O4 and CuFe2O4-rGO-NCs, respectively. The catalyst CuFe2O4-rGO-NCs provided higher degradation of MB (94%) than for RhB (86%) under UV light irradiation compared to CuFe2O4. Further, the antibacterial activities of CuFe2O4-NPs and CuFe2O4-rGO-NCs were tested against Gram-negative and -positive bacterial pathogens such as Vibrio cholera (V. cholera); Escherichia coli (E. coli); Pseudomonas aeruginosa (P. aeruginosa); Bacillus subtilis (B. subtilis); Staphylococcus aureus (S. aureus); and Staphylococcus epidermidis (S. epidermidis) by well diffusion method. At 100 μg/mL concentrations of CuFe2O4-rGO-NCs, maximal growth inhibition was shown against E. coli (18 mm) and minimum growth inhibition against S. epidermidis (12 mm). This study suggests that CuFe2O4-rGO-NCs as a high-efficacy antibacterial material and plays an important role in exhibiting higher sensitivity depending on concentrations. The results encourage that the synthesized CuFe2O4-rGO-NCs can be used as a promising material for the antibacterial activity and also for dye degradation in the water/wastewater treatment plants.

Electro-optical behaviour of CuFe2 O4 @rGO nanocomposite for nonenzymatic detection of uric acid via the electrochemical method

Uric acid (UA) is a blood and urine component obtained as a metabolic by-product of purine nucleotides. Abnormalities in UA metabolism cause crystal deposition as monosodium urate and lead to various diseases such as gout, hyperuricemia, Lesch-Nyhan syndrome, etc. Monitoring these diseases requires a rapid, sensitive, selective, and portable detection approach. Therefore, this study demonstrates the hydrothermal synthesis of CuFe2 O4 /reduced graphene oxide (rGO) nanocomposite for selective detection of UA. After the nanocomposite synthesis, characterization was performed by X-ray diffraction spectroscopy, Fourier transform infrared spectroscopy, Raman spectroscopy, X-ray photoelectron spectroscopy, UV-visible spectrometry, atomic force spectroscopy, scanning electron microscopy, and electrochemical analysis. Furthermore, from the electrochemical analysis using cyclic voltammetry (CV), kinetic studies were carried out by varying the scan rate to obtain the diffusion coefficient, surface concentration, and rate of charge transfer to achieve a calibration curve that indicates the quasi reversible nature of the fabricated electrode with a linear regression coefficient of oxidation (R2 : 0.9992) and reduction (R2 : 0.9971) peaks. Moreover, the fabricated nonenzymatic amperometric sensor to detect UA with a linearity (R2 : 0.9989) of 1-400 μM was highly sensitive (2.75 × 10-4  mAμM-1  cm-2 ) and had a lower limit of detection (0.01231 μM) at pH 7.5 in phosphate-buffered saline solution. Therefore, the CuFe2 O4 /rGO/ITO-based nonenzymatic sensor could detect interfering agents and spiked real bovine serum samples with higher sensitivity and selectivity for UA detection.

Recent advancements in zero- to three-dimensional carbon networks with a two-dimensional electrode material for high-performance supercapacitors

Supercapacitors have gained significant attention owing to their exceptional performance in terms of energy density and power density, making them suitable for various applications, such as mobile devices, electric vehicles, and renewable energy storage systems. This review focuses on recent advancements in the utilization of 0-dimensional to 3-dimensional carbon network materials as electrode materials for high-performance supercapacitor devices. This study aims to provide a comprehensive evaluation of the potential of carbon-based materials in enhancing the electrochemical performance of supercapacitors. The combination of these materials with other cutting-edge materials, such as Transition Metal Dichalcogenides (TMDs), MXenes, Layered Double Hydroxides (LDHs), graphitic carbon nitride (g-C₃N₄), Metal-Organic Frameworks (MOFs), Black Phosphorus (BP), and perovskite nanoarchitectures, has been extensively studied to achieve a wide operating potential window. The combination of these materials synchronizes their different charge-storage mechanisms to attain practical and realistic applications. The findings of this review indicate that hybrid composite electrodes with 3D structures exhibit the best potential in terms of overall electrochemical performance. However, this field faces several challenges and promising research directions. This study aimed to highlight these challenges and provide insights into the potential of carbon-based materials in supercapacitor applications.

Sustainable Cauliflower-Patterned CuFe2O4 Electrode Production from Chalcopyrite for Supercapacitor Applications

The primary purpose of this study was to produce an ore-based high-capacity supercapacitor electrode. For this, chalcopyrite ore was first leached with nitric acid, and then metal oxide synthesis was carried out immediately on nickel foam using a hydrothermal technique from the solution. Cauliflower-patterned CuFe₂O₄ with a wall thickness of about 23 nm was synthesized on the Ni foam surface, characterized by XRD, FTIR, XPS, SEM, and TEM investigations. The produced electrode also displayed a feature of a battery-like charge storage mechanism with a specific capacity of 525 mF cm^-2 at 2 mA cm^-2 current density, energy of 8.9 mWh cm^-2, and a power density of 233 mW cm^-2. Additionally, even after 1350 cycles, this electrode still performed at 109% of its original capacity. The performance of this finding is 255% higher than that of the CuFe₂O₄ in our earlier investigation; despite being pure, it performs far better than some of its equivalents in the literature. Obtaining such performance from an electrode made from ore indicates that the use of ore has a lot of potential for supercapacitor production and property improvement.

Study of Barium Adsorption from Aqueous Solutions Using Copper Ferrite and Copper Ferrite/rGO Magnetic Adsorbents

The development of advanced materials for the removal of heavy metal ions is a never-ending quest of environmental remediation. In this study, a facile and cost-effective approach was employed to synthesize copper ferrite (CF) and copper ferrite/reduced graphene oxide (CG) by microwave assisted combustion method for potential removal of barium ions from aqueous medium. The physiochemical characterizations indicated the formation of magnetic nanocomposite with an average crystallite size of CF and CG is 32.4 and 30.3 nm and with specific surface area of 0.66 and 5.74 m2/g. The magnetic results possess multidomain microstructures with saturation magnetization of 37.11 and 33.84 emu/g for CF and CG. The adsorption studies prove that upon addition of rGO on the spherical spinel ferrite, the adsorption performance was greatly improved for CG nanocomposite when compared with the bare CF nanoparticles. The proposed magnetic adsorbent demonstrated a relatively high Ba2+ adsorption capacity of 161.6 mg·g-1 for CG nanocomposite when compared to 86.6 mg·g-1 for CF nanoparticles under optimum conditions ( $\text{pH}=7;T={25}^{°}\text{C}$ ). The pseudo-first-order (PFO), pseudo-second-order (PSO), and Elovich models were fitted to the kinetic data, the yielded $R^2$ value of 0.9993 (PSO) for CF and 0.9994 (PSO) for CG which is greater than the other two models, which signify that the adsorption process is chemisorption. Thermodynamic studies show that barium adsorption using CF and CG adsorbents is endothermic. The as-fabricated CuFe2O4/rGO nanocomposite represents a propitious candidate for the removal of heavy metal ions from aqueous solutions.

Magnetic CuFe2O4 Nanoparticles with Pseudocapacitive Properties for Electrical Energy Storage

This investigation is motivated by increasing interest in the development of magnetically ordered pseudocapacitors (MOPC), which exhibit interesting magnetocapacitive effects. Here, advanced pseudocapacitive properties of magnetic CuFe₂O₄ nanoparticles in negative potential range are reported, suggesting that CuFe₂O₄ is a promising MOPC and advanced negative electrode material for supercapacitors. A high capacitance of 2.76 F cm^-2 is achieved at a low electrode resistance in a relatively large potential window of 0.8 V. The cyclic voltammograms and galvanostatic charge-discharge data show nearly ideal pseudocapacitive behavior. Good electrochemical performance is achieved at a high active mass loading due to the use of chelating molecules of ammonium salt of purpuric acid (ASPA) as a co-dispersant for CuFe₂O₄ nanoparticles and conductive multiwalled carbon nanotube (MCNT) additives. The adsorption of ASPA on different materials is linked to structural features of ASPA, which allows for different interaction and adsorption mechanisms. The combination of advanced magnetic and pseudocapacitive properties in a negative potential range in a single MOPC material provides a platform for various effects related to the influence of pseudocapacitive/magnetic properties on magnetic/pseudocapacitive behavior.

Fabrication of nitrogen-doped reduced graphene oxide/hollow copper ferrite composite aerogels as lightweight, thin and high-efficiency electromagnetic wave absorbers in the X band

The development of lightweight, thin and high-efficiency electromagnetic (EM) wave absorbers remains a huge challenge in the field of EM absorption. Graphene aerogels with three-dimensional (3D) network structure and low bulk density have been considered as potential EM absorbing materials. In this work, nitrogen-doped reduced graphene oxide/hollow copper ferrite (NRGO/hollow CuFe₂O₄) composite aerogels were fabricated by the three-step method of solvothermal reaction, hydrothermal self-assembly and calcination treatment. The as-prepared composite aerogels had a unique 3D hierarchical porous network structure. Furthermore, results demonstrated that the EM absorption performance of attained composite aerogels could be improved by adjusting the calcination temperature. Notably, the obtained composite aerogel calcined at 400.0 ℃ exhibited the best EM absorption performance. When the loading ratio was as low as 15.0 wt%, the minimum reflection loss reached up to -54.5 dB with a matching thickness of 2.0 mm, and the maximum effective absorption bandwidth of 5.0 GHz could be achieved under an extremely thin thickness of 1.6 mm. Additionally, the probable EM attenuation mechanisms of attained composite aerogels were proposed. The results of this work could be helpful for developing graphene-based 3D composites as lightweight, thin and high-efficiency EM wave absorbers.

CoFe2O4 Hollow Spheres-Decorated Three-Dimensional rGO Sponge for Highly Efficient Electrochemical Charge Storage Devices

The energy demand, the crisis of fossil fuels, and the increasing popularity of portable and wearable electronics in the global market have triggered the demand to develop high-performance flexible all-solid-state supercapacitors that are capable of delivering high energy at high power density as well as being safely entrenched in those electronics. Herein, we have designed a nanocomposite, 80CFhs-20rGOsp, which exhibits a high specific capacitance (C S) value of 1032 F g-1 at 3 A g-1. Utilizing this nanocomposite as the cathode and reduced graphene oxide sponge (rGOsp) as the anode, a flexible all-solid-state asymmetric device has been fabricated. In this device, poly(vinyl alcohol) (PVA) gel embedded with a mixture of 3 M KOH and 0.1 M K4[Fe(CN)6] was used as an electrolyte cum separator. The fabricated device showed the capability to deliver an energy density of 65.8 W h kg-1 at a power density of 1500 W kg-1 and retained its capability even after various physical deformations. The device also exhibited a long cycle life and retained ∼96% of its C S value after 5000 cycles. Moreover, the fabricated flexible all-solid-state device successfully illuminated light-emitting diodes, which proved its potential use in real-life supercapacitor applications. The obtained results revealed the excellent electrochemical performances of the fabricated device and rendered it a promising candidate in the energy sector.

Dual-Purpose CuFe2O4-rGO-Based Nanocomposite for Asymmetric Flexible Supercapacitors and Catalytic Reduction of Nitroaromatic Derivatives

Energy storage and environmental pollution are two major global concerns in today's scenario. As a result of the momentous exhaustion of fossil fuels, the generation of energy from renewable sources is gaining immense importance. However, the irregular availability of energy from these renewable sources is the major encounter to achieve sustainable energy harvesting technology, yielding efficient but continuous and reliable energy supplies. Apart from the requirement of state-of-the-art heavy-duty technologies such as transportation, defense, etc., in the modern lifestyle to fulfill the demand for flexible electronic devices, the development of high-performance mechanically flexible all-solid-state supercapacitors is increasing massively. On the other hand, to cater to the need for accessibility of clean water for healthy lives, several technologies are evolving to treat wastewater and groundwater. Hence, the development of efficient catalysts for destroying water pollutants is an attractive approach. Considering these two crucial facets, in this paper, we have demonstrated the multifunctional features of a CuFe2O4-rGO nanocomposite, which was exploited to fabricate a high-performance mechanically flexible all-solid-state asymmetric supercapacitor and simultaneously used as an efficient but easily recoverable catalyst for the transformation of different nitroaromatic compounds. We have also demonstrated the conversion of trifluralin (a herbicide), which is present in the water body as a pollutant, to its corresponding amine derivatives, which can be utilized in the preparation of important pharmaceutical products.

Green Synthesis and Applications of ZnO and TiO2 Nanostructures

Over the last two decades, oxide nanostructures have been continuously evaluated and used in many technological applications. The advancement of the controlled synthesis approach to design desired morphology is a fundamental key to the discipline of material science and nanotechnology. These nanostructures can be prepared via different physical and chemical methods; however, a green and ecofriendly synthesis approach is a promising way to produce these nanostructures with desired properties with less risk of hazardous chemicals. In this regard, ZnO and TiO2 nanostructures are prominent candidates for various applications. Moreover, they are more efficient, non-toxic, and cost-effective. This review mainly focuses on the recent state-of-the-art advancements in the green synthesis approach for ZnO and TiO2 nanostructures and their applications. The first section summarizes the green synthesis approach to synthesize ZnO and TiO2 nanostructures via different routes such as solvothermal, hydrothermal, co-precipitation, and sol-gel using biological systems that are based on the principles of green chemistry. The second section demonstrates the application of ZnO and TiO2 nanostructures. The review also discusses the problems and future perspectives of green synthesis methods and the related issues posed and overlooked by the scientific community on the green approach to nanostructure oxides.

Insights of arsenic (III/V) adsorption and electrosorption mechanism onto multi synergistic (redox-photoelectrochemical-ROS) aluminum substituted copper ferrite impregnated rGO

The understanding of mechanistic insights in environmental remediation and mitigation systems is attracting larger attention, in recent days. Here in, aluminium substituted copper ferrite impregnated rGO hybrid (CAF-rGO) is verified to understand the adsorption/electrosorption mechanism of arsenic in aqueous systems. Near-surface study (XPS: As 3d, Cu 2p, Fe 2p, Al 2p, O 1s, C 1s) proposes redox, and ligand exchange reactions between contaminant, and CAF-rGO. Adsorption capacities are observed around 128.8 mg g^-1 [As(III)], 153.5 mg g^-1 [As(V)] with Freundlich model isotherms. Kinetics study follows the PSO model with influence of solar light (> 420 nm). Cyclic voltammetry (CV) analysis in different molarity conditions observed with signals around +0.1 and -0.6 V confirm the redox abilities, and N₂/O₂ purged environments understood that electrosorption occurred through both reduction and sorption. Electrosorption study with pH variation shows the effect of protonation on the redox activity of individual arsenic species. Consistent signal around -0.6 ± 0.05 V in all the CV plots (i.e., Molarity, Environment, pH) recommends the usage of CAF-rGO for arsenic mitigation. Possible influence of photo-current (∼40 μA/cm² at ∼ 0 V) towards As(III/V) decontamination is understood though photoelectrochemical analysis. Impedance plot shows low-resistance and better diffusion of arsenic oxy-anions during light irradiation. Synergistic nature of CAF-rGO generates reactive oxygen species (i.e., ^●OH/^●O₂^-/₁O²) in mitigating highly toxic As(III) species is also detailed in the present work.

Nickel doped copper ferrite NixCu1−xFe2O4 for a high crystalline anode material for lithium ion batteries

Transition metal oxides (TMO) have great potential applications in efficient energy storage devices for their commercial possibilities in lithium-ion batteries (LIBs).

Low-temperature-synthesized Mn-doped Bi2Fe4O9 as an efficient electrode material for supercapacitor applications

Manganese-doped Bi2Fe4O9, a new material synthesized at a low temperature with a micro-rectangular-shaped particles, is used for supercapacitor applications.

Crystallographic and micro-structural investigations in C-phase spinels of CuFe2O4 synthesized through C12H22O11.H2O mediation

Nanocrystalline CuFe₂O₄ was synthesized through stotiometric mixing of aqueous solutions of Cu(NO₃)₂. 3H₂O and Fe(NO₃)₃. 9H₂O mediated by α-Lactose monohydrate (C₁₂H₂₂O₁₁.H₂O) as reductant. Aqueous NaOH solution was used as the catalyst and the reaction was carried out at room temperature. The ageing of crystallites in cubic spinel structure was accomplished by annealing the powder sample at 600 °C for 4 h. The crystallographic structure, size, strain, density, lattice parameters, inversion parameter, cation distribution, mechanism of formation, the phase homogeneity and hydrophilic behavior of the sample were studied through methods such as X-ray diffraction pattern analysis techniques, rietveld profile refinement of XRD pattern and FTIR measurements. FESEM images provided an insight into the micro-structural orientations in the formation of the sample. The semiconducting behavior and the direct band gap of 3.21 eV were estimated from Tauc' plot employing Kubelka-Munk function for the reflectance data recorded through UV-vis spectroscopy. Further, based on the value of inversion parameter, the magnetization of the sample is predicted to be low and assumed to be in superparamagnetic regime at room temperature.

Pulsed laser deposited CoFe2O4 thin films as supercapacitor electrodes

The influence of the substrate temperature on pulsed laser deposited (PLD) CoFe2O4 thin films for supercapacitor electrodes was thoroughly investigated. X-ray diffractometry and Raman spectroscopic analyses confirmed the formation of CoFe2O4 phase for films deposited at a substrate temperature of 450 °C. Topography and surface smoothness was measured using atomic force microscopy. We observed that the films deposited at room temperature showed improved electrochemical performance and supercapacitive properties compared to those of films deposited at 450 °C. Specific capacitances of about 777.4 F g-1 and 258.5 F g-1 were obtained for electrodes deposited at RT and 450 °C, respectively, at 0.5 mA cm-2 current density. The CoFe2O4 films deposited at room temperature exhibited an excellent power density (3277 W kg-1) and energy density (17 W h kg-1). Using electrochemical impedance spectroscopy, the series resistance and charge transfer resistance were found to be 1.1 Ω and 1.5 Ω, respectively. The cyclic stability was increased up to 125% after 1500 cycles due to the increasing electroactive surface of CoFe2O4 along with the fast electron and ion transport at the surface.

Spinel copper–iron-oxide magnetic nanoparticles with cooperative Cu(i) and Cu(ii) sites for enhancing the catalytic transformation of 1,2-propanediol to lactic acid under anaerobic conditions

The synergy between Cu(i) and Cu(ii) sites in spinel CuFeO_x magnetic nanoparticles contributes to the significant enhancement in catalytic 1,2-propanediol transformation into lactic acid.

A "One-Pot" Route for the Synthesis of Snowflake-like Dendritic CoNi Alloy-Reduced Graphene Oxide-Based Multifunctional Nanocomposites: An Efficient Magnetically Separable Versatile Catalyst and Electrode Material for High-Performance Supercapacitors

In this paper, a simple "one pot" methodology to synthesize snowflake-like dendritic CoNi alloy-reduced graphene oxide (RGO) nanocomposites has been reported. First-principles quantum mechanical calculations based on density functional theory (DFT) have been conducted to understand the electronic structures and properties of the interface between Co, Ni, and graphene. Detailed investigations have been conducted to evaluate the performance of CoNi alloy and CoNi-RGO nanocomposites for two different types of applications: (i) as the catalyst for the reduction reaction of 4-nitrophenol and Knoevenagel condensation reaction and (ii) as the active electrode material in the supercapacitor applications. Here, the influence of microstructures of CoNi alloy particles (spherical vs snowflake-like dendritic) and the effect of immobilization of CoNi alloy on the surface of RGO on the performance of CoNi-RGO nanocomposites have been demonstrated. CoNi alloy having a snowflake-like dendritic microstructure exhibited better performance than that of spherical CoNi alloy, and CoNi-RGO nanocomposites showed improved properties compared to CoNi alloy. The k app value of the (CoNiD)60RGO40-catalyzed reduction reaction of 4-nitrophenol is 20.55 × 10-3 s-1, which is comparable and, in some cases, superior to many RGO-based catalysts. The (CoNiD)60RGO40-catalyzed Knoevenagel condensation reaction showed the % yield of the products in the range of 80-93%. (CoNiD)60RGO40 showed a specific capacitance of 501 F g-1 (at 6 A g-1), 21.08 Wh kg-1 energy density at a power density of 1650 W kg-1, and a retention of ∼85% of capacitance after 4000 cycles. These results indicate that (CoNiD)60RGO40 could be considered as a promising electrode material for high-performance supercapacitors. The synergistic effect, derived from the hierarchical structure of CoNiD-RGO nanocomposites, is the origin for its superior performance. The easy synthetic methodology, high catalytic efficiency, and excellent supercapacitance performance make (CoNiD)60RGO40 an appealing multifunctional material.

Magnetic, Pseudocapacitive, and H2O2-Electrosensing Properties of Self-Assembled Superparamagnetic Co0.3Zn0.7Fe2O4 with Enhanced Saturation Magnetization

The present work explores the structural, microstructural, optical, magnetic, and hyperfine properties of Co0.3Zn0.7Fe2O4 microspheres, which have been synthesized by a novel template-free solvothermal method. Powder X-ray diffraction, electron microscopic, and Fourier transform infrared spectroscopic techniques were employed to thoroughly investigate the structural and microstructural properties of Co0.3Zn0.7Fe2O4 microspheres. The results revealed that the microspheres (average diameter ∼121 nm) have been formed by self-assembly of nanoparticles with an average particle size of ∼12 nm. UV-vis diffuse reflectance spectroscopic and photoluminescence studies have been performed to study the optical properties of the sample. The studies indicate that Co0.3Zn0.7Fe2O4 microspheres exhibit a lower band gap value and enhanced PL intensity compared to their nanoparticle counterpart. The outcomes of dc magnetic measurement and Mössbauer spectroscopic study confirm that the sample is ferrimagnetic in nature. The values of saturation magnetization are 76 and 116 emu g-1 at 300 and 5 K, respectively, which are substantially larger than its nanosized counterpart. The infield Mössbauer spectroscopic study and Rietveld analysis of the PXRD pattern reveal that Fe3+ ions have migrated from [B] to (A) sites resulting in the cation distribution: (Zn2+ 0.46Fe3+ 0.54)A[Zn2+ 0.24Co2+ 0.3Fe3+ 1.46]BO4. Comparison of electrochemical performance of the Co0.3Zn0.7Fe2O4 microspheres to that of the Co0.3Zn0.7Fe2O4 nanoparticles reveals that the former displays greater specific capacitance (149.13 F g-1) than the latter (80.06 F g-1) due to its self-assembled porous structure. Moreover, it was found that Co0.3Zn0.7Fe2O4 microspheres possess a better electrochemical response toward H2O2 sensing than Co0.3Zn0.7Fe2O4 nanoparticles in a wide linear range.

Facile synthesis of ternary graphene nanocomposites with doped metal oxide and conductive polymers as electrode materials for high performance supercapacitors

Supercapacitors (SCs) due to their high energy density, fast charge storage and energy transfer, long charge discharge curves and low costs are very attractive for designing new generation of energy storage devices. In this work we present a simple and scalable synthetic approach to engineer ternary composite as electrode material based on combination of graphene with doped metal oxides (iron oxide) and conductive polymer (polypyrrole) with aims to achieve supercapacitors with very high gravimetric and areal capacitances. In the first step a binary composite with graphene mixed with doped iron oxide (rGO/MeFe₂O₄) (Me = Mn, Ni) was synthesized using new single step process with NaOH acting as a coprecipitation and GO reducing agent. This rGO/MnFe₂O₄ composite electrode showed gravimetric capacitance of 147 Fg⁻¹ and areal capacitance of 232 mFcm⁻² at scan rate of 5 mVs⁻¹. In the final step a conductive polypyrrole was included to prepare a ternary composite graphene/metal doped iron oxide/polypyrrole (rGO/MnFe₂O₄/Ppy) electrode. Ternary composite electrode showed significantly improved gravimetric capacitance and areal capacitance of 232 Fg⁻¹ and 395 mFcm⁻² respectively indicating synergistic impact of Ppy additives. The method is promising to fabricate advanced electrode materials for high performing supercapacitors combining graphene, doped iron oxide and conductive polymers.

Mn-Modified CuO, CuFe2O4, and γ-Fe2O3 Three-Phase Strong Synergistic Coexistence Catalyst System for NO Reduction by CO with a Wider Active Window

A series of samples with the precursor's molar ratio of {KMn₈O₁₆}/{CuFe₂O₄} = 0, 0.008, 0.010, 0.016, and 0.020 were successfully synthesized for selective catalytic reduction of NO by CO. The physicochemical properties of all samples were studied in detail by combining the means of X-ray photoelectron spectroscopy, H₂-temperature-programmed reduction, scanning electron microscopy mapping, X-ray diffraction (XRD), N₂ physisorption (Brunauer-Emmett-Teller), NO + CO model reaction, and in situ Fourier transform infrared spectroscopy techniques. The results show that three phases of γ-Fe₂O₃, CuFe₂O₄, and CuO, which have strong synergistic interaction, coexist in this catalyst system, and different phases play a leading role in different temperature ranges. Mn species are highly dispersed in the three-phase coexisting system in the form of Mn²⁺, Mn³⁺, and Mn⁴⁺. Because of the strong interaction between Mn²⁺ and Fe species, a small amount of Cu²⁺ precipitates from CuFe₂O₄ and grows along the CuO(110) plane, which has better catalytic performance. Mn³⁺ can inhibit the conversion of γ-Fe₂O₃ to α-Fe₂O₃ at high temperature and then increases the high-temperature activity. The synergistic effect between Mn⁴⁺ and the surfaces of three phases generates active oxygen species Cu²⁺-O-Mn⁴⁺ and Mn⁴⁺-O-Fe³⁺, which can be more easily reduced to some synergistic oxygen vacancies during the reaction. Furthermore, the formed synergistic oxygen vacancies can promote the dissociation of NO and are also propitious to the transfer of oxygen species. All of these factors make the appropriate manganese-modified three-phase coexisting system have better catalytic activity than the manganese-free catalyst, making NO conversion rate reach 100% at around 250 °C and maintain to 1000 °C. Combining comprehensive analysis of various characterization results and in situ infrared as well as XRD results in the equilibrium state, a new possible NO + CO model reaction mechanism was temporarily proposed to further understand the catalytic processes.