Conjugated polymer dots-on-electrospun fibers as a fluorescent nanofibrous sensor for nerve gas stimulant

Mulberry Leaves (Morus Rubra)-Derived Blue-Emissive Carbon Dots Fed to Silkworms to Produce Augmented Silk Applicable for the Ratiometric Detection of Dopamine

Silk fibers (SF) reeled from silkworms are constituted by natural proteins, and their characteristic structural features render them applicable as materials for textiles and packaging. Modification of SF with functional materials can facilitate their applications in additional areas. In this work, the preparation of functional SF embedded with carbon dots (CD) is reported through the direct feeding of a CD-modified diet to silkworms. Fluorescent and mechanically robust SF are obtained from silkworms (Bombyx mori) that are fed on CDs synthesized from the Morus rubra variant of mulberry leaves (MB-CDs). MB-CDs are introduced to silkworms from the third instar by spraying them on the silkworm feed, the mulberry leaves. MB-CDs are synthesized hydrothermally without adding surface passivating agents and are observed to have a quantum yield of 22%. With sizes of ≈4 nm, MB-CDs exhibited blue fluorescence, and they can be used as efficient fluorophores to detect Dopamine (DA) up to the limit of 4.39 nM. The nanostructures and physical characteristics of SF weren't altered when the SF are infused with MB-CDs. Also, a novel DA sensing application based on fluorescence with the MB-CD incorporated SF is demonstrated.

Electrospun nanofibers: promising nanomaterials for biomedical applications

With the rapid development of nanotechnology and nanomaterials science, electrospun nanofibers emerged as a new material with great potential for a variety of applications. Electrospinning is a simple and adaptable process for generation of nanofibers from a viscoelastic fluid using electrostatic repulsion between surface charges. Electrospinning has been used to manufacture nanofibers with low diameters from a wide range of materials. Electrospinning may also be used to construct nanofibers with a variety of secondary structures, including those having a porous, hollow, or core–sheath structure. Due to many attributes including their large specific surface area and high porosity, electrospun nanofibers are suitable for biosensing and environmental monitoring. This book chapter discusses the different methods of nanofiber preparations and the challenges involved, recent research progress in electrospun nanofibers, and the ways to commercialize these nanofiber materials.

Progression of Quantum Dots Confined Polymeric Systems for Sensorics

The substantial fluorescence (FL) capabilities, exceptional photophysical qualities, and long-term colloidal stability of quantum dots (QDs) have aroused a lot of interest in recent years. QDs have strong and wide optical absorption, good chemical stability, quick transfer characteristics, and facile customization. Adding polymeric materials to QDs improves their effectiveness. QDs/polymer hybrids have implications in sensors, photonics, transistors, pharmaceutical transport, and other domains. There are a great number of review articles available online discussing the creation of CDs and their many uses. There are certain review papers that can be found online that describe the creation of composites as well as their many different uses. For QDs/polymer hybrids, the emission spectra were nearly equal to those of QDs, indicating that the optical characteristics of QDs were substantially preserved. They performed well as biochemical and biophysical detectors/sensors for a variety of targets because of their FL quenching efficacy. This article concludes by discussing the difficulties that still need to be overcome as well as the outlook for the future of QDs/polymer hybrids.

Electrospun Conducting Polymers: Approaches and Applications

Inherently conductive polymers (CPs) can generally be switched between two or more stable oxidation states, giving rise to changes in properties including conductivity, color, and volume. The ability to prepare CP nanofibers could lead to applications including water purification, sensors, separations, nerve regeneration, wound healing, wearable electronic devices, and flexible energy storage. Electrospinning is a relatively inexpensive, simple process that is used to produce polymer nanofibers from solution. The nanofibers have many desirable qualities including high surface area per unit mass, high porosity, and low weight. Unfortunately, the low molecular weight and rigid rod nature of most CPs cannot yield enough chain entanglement for electrospinning, instead yielding polymer nanoparticles via an electrospraying process. Common workarounds include co-extruding with an insulating carrier polymer, coaxial electrospinning, and coating insulating electrospun polymer nanofibers with CPs. This review explores the benefits and drawbacks of these methods, as well as the use of these materials in sensing, biomedical, electronic, separation, purification, and energy conversion and storage applications.

Electrospinning-Based Carbon Nanofibers for Energy and Sensor Applications

Carbon nanofibers (CNFs) are the most basic structure of one-dimensional nanometer-scale sp2 carbon. The CNF’s structure provides fast current transfer and a large surface area and it is widely used as an energy storage material and as a sensor electrode material. Electrospinning is a well-known technology that enables the production of a large number of uniform nanofibers and it is the easiest way to mass-produce CNFs of a specific diameter. In this review article, we introduce an electrospinning method capable of manufacturing CNFs using a polymer precursor, thereafter, we present the technologies for manufacturing CNFs that have a porous and hollow structure by modifying existing electrospinning technology. This paper also discusses research on the applications of CNFs with various structures that have recently been developed for sensor electrode materials and energy storage materials.

BODIPY-based fluorescent chemosensor for phosgene detection: confocal imaging of nasal mucosa and lung samples from mouse exposed to phosgene

The improper use of phosgene, either as a chemical warfare agent or a leak during chemical production, causes significant risks to human life and property. Therefore, it is particularly important to develop a rapid and highly selective method for the detection of phosgene. In this article, a highly selective fluorescent sensor ONB with a BODIPY unit as a fluorophore and o-aminophenol as a reactive site was constructed for the selective and rapid detection of phosgene in solution. The ONB-containing nanofibers were sprayed onto a non-woven fabric by electrostatic spinning and cut into test films, which can be used well for the detection of gaseous phosgene. While, there were no reported bio-imaging applications for phosgene detection. In this work, nasal mucosa and lung samples from the mice exposed to gaseous phosgene after dropping the ONB solution through the nasal cavity achieved bio-imaging applications successfully.

Cesium ion adsorption and desorption on electrospun mesoporous silica nanofibers immobilized with Prussian blue

To fabricate an efficient Cs ion adsorbent and prevent unexpected loss of Prussian blue (PB) colloidal particles during use, PB was immobilized on the surface of electrospun mesoporous silica nanofibers (MSFs) via a newly developed method of double exposure to Fe (III) ions. To introduce PB on MSFs, the MSFs were functionalized with ethylenediamine moiety to bind to Fe (III) ions, which would firmly anchor PB. MSFs were pretreated with Fe (III) ions and exposed to K₄ [Fe(II) (CN)₆] to form PB. We found that this process did not provide a sufficient PB amount on the MSFs. To increase the PB amount, after initial PB formation, the MSFs were treated with Fe (III) ions again so that the unreacted K₄ [Fe(II) (CN)₆] remaining on the MSFs could become PB. An investigation of the adsorption isotherms and kinetics of the nanofibrous adsorbent indicated that monolayer chemisorption had occurred. The maximum Cs ion adsorption capacity using the method of double exposure to Fe (III) ions was determined to be 14.66 mg/g, which was higher by a factor of 2.24 than the case that was not prepared by this method. Cs ions were selectively adsorbed over other cations and could be removed in both acidic and basic conditions, presumably because of the robust MSFs.

Flexible electrospun nanofibrous film integrated with fluorescent carbon dots for smartphone-based detection and cellular imaging application

The dose of administered chemotherapy drugs is crucial to determine due to the potential for efficient or adverse outcomes for cancer patients. To date, no user-friendly and low-cost method of doxorubicin (DOX) detection using nontoxic and biodegradable materials has been reported. For this reason, in this work, we have developed for the first time a nanofiber-based sensing platform for sensitive and on-site DOX assay in just 10 min. This is obtained thanks to printable, porosity and embeddability features of electrospun nanofibrous films (ENFFs) combined with nitrogen and sulfur co-doped carbon dots (NS-CDs) as sensing probes. The assay was done by just pipetting analyte on the hydrophilic spots of the fabricated photoluminescence water-stable ENFFs where the color intensity was being darkened. DOX quenched NS-CDs fluorescence onto ENFFs through inner filter effect. The developed sensor was either coupled with smartphone technology to provide miniaturized, portable and easy-to-use device or an ordinary spectrofluorimeter for solid-state sensing applications (detection limit of 5.4 nM). Moreover, applicability of the designed sensor was evaluated in human serum with satisfactory recoveries. It is more interesting that the fabricated NS-CDs/ENF scaffolds have a high potential to detect the intracellular DOX to enhance cell proliferation leading to be considered as a multimodal tool in biomedical research and clinical diagnostics.

A simple organic multi-analyte fluorescent prober: One molecule realizes the detection to DNT, TATP and Sarin substitute gas

The detections of explosives and chemical warfare agents (CWAs) are always important for global security. In this study, a simple donor (D)- acceptor (A) type small organic fluorescent triazole-based molecule (T1) is reported. T1 is composed of a central 4H-1, 2, 4-triazole (TAZ) "core" and three external triphenylamine (TPA) groups. Its spin-coating films can realize the multi-analyte fluorescent prober to detect DNT (2, 4-dinitrotoluene), hydrogen peroxide (H₂O₂, the substitute for triacetone triperoxide (TATP)) and diethylchlorophosphate (DCP, the substitute for Sarin) vapors. Additionally, the combination of the triple sensing mechanism in the different channels affords three distinct sets of output-signal responses, these three hazardous compounds could be identified rapidly with high sensitivity and selectivity: fluorescence turn-off response to DNT, fluorescence turn-on response to H₂O₂ and fluorometric-colorimetric dual-channel response to DCP. T1 fluorescent probe is highly advantageous for concurrently monitoring various hazardous target substances and simultaneously possessing the desirable sensitivity and selectivity, excellent reusability. Hereby, this study provides a prototype method to build novel multifunctional fluorescent probes to explosives and CWAs.

Acid is a potential interferent in fluorescent sensing of chemical warfare agent vapors

A common feature of fluorescent sensing materials for detecting chemical warfare agents (CWAs) and simulants is the presence of nitrogen-based groups designed to nucleophilically displace a phosphorus atom substituent, with the reaction causing a measurable fluorescence change. However, such groups are also basic and so sensitive to acid. In this study we show it is critical to disentangle the response of a candidate sensing material to acid and CWA simulant. We report that pyridyl-containing sensing materials designed to react with a CWA gave a strong and rapid increase in fluorescence when exposed to Sarin, which is known to contain hydrofluoric acid. However, when tested against acid-free diethylchlorophosphate and di-iso-propylfluorophosphate, simulants typically used for evaluating novel G-series CWA sensors, there was no change in the fluorescence. In contrast, simulants that had been stored or tested under a standard laboratory conditions all led to strong changes in fluorescence, due to acid impurities. Thus the results provide strong evidence that care needs to be taken when interpreting the results of fluorescence-based solid-state sensing studies of G-series CWAs and their simulants. There are also implications for the application of these pyridyl-based fluorescence and other nucleophilic/basic sensing systems to real-world CWA detection.

Robust, rapid, and ultrasensitive colorimetric sensors through dye chemisorption on poly-cationic nanodots

Colorimetric sensors were fabricated by incorporation of anionic colorimetric probes on a hierarchical nanofibrous membrane containing poly-cationic nanodots through intense electrostatic interaction. Unique poly-cationic nanodots were covalently grown on poly (4-vinylpyridine)/polyacrylonitrile nanofibrous membrane through a self-propagation reaction of 2-diethylaminoethyl chloride (DEAE-Cl). The nanodots on the nanofiber surfaces possess strong adsorption affinity and high adsorption capacity toward anionic probes, which contributed to excellent detection sensitivity and sensor stability compared with the co-electrospun sensor. As a proof-of-concept study, phenol red was selected to functionalize the as-fabricated substrate (polyDEAE@P4VP/PAN NFM) to a colorimetric sensor, which shows responses to alkaline vapors. The as-fabricated sensor showed rapid color changes to ammonia and triethylamine (response time < 10 s), whose detection limits reached 1 ppm and 5 ppm, respectively. The sensor can be repeatedly used for at least 20 cycles by regenerating it in air for 1 min. Taking advantage of the intense attractive force between poly-cationic nanodots and anionic probes, polyDEAE@P4VP/PAN NFM is a promising media to be used for the development of robust, rapid, and ultrasensitive colorimetric sensors.

Highly efficient detection of cancer-derived exosomes using modified core-shell electrospun nanofibers as a capture substrate and antibody immobilized-graphene quantum dots as a signaling agent

In the past few years graphene quantum dots (GQDs) have been used as a signaling agent for medical diagnosis. They can be modified and labeled with different macromolecules to give them potential to be attached to a specific target. Herein GQDs were labeled with an antibody which is specific for cancer-derived exosomes, isolated from blood serum by using a specialized PCL-gelatin core-shell NFM. This membrane showed excellent sensitivity for isolating exosomes from a complex mixture such as serum, and the GQD-antibody complex detected the isolated exosomes with great sensitivity. The final results allow this method to be considered as one that can be used to quantify the concentration of a desired analyte in a mixture.

A promising approach toward efficient isolation of the exosomes by core-shell PCL-gelatin electrospun nanofibers

Exosomes as cell-derived vesicles are promising biomarkers for noninvasive and early detection of different types of cancer. However, a straightforward and cost-effective technique for isolation of exosomes in routine clinical settings is still challenging. Herein, we present for the first time, a novel coaxial nanofiber structure for the exosome isolation from body fluids with high efficiency. Coaxial nanofiber structure is composed of polycaprolactone polymer as core and a thin layer of gelatin (below 10 nm) as the shell. The thermo-sensitive thin layer of gelatin can efficiently release the captured exosome by specific antibody namely, CD63, whenever its temperature raised to the physiological temperature of 37 °C. Moreover, the thin layer of gelatin induces less contamination to separated exosomes. The interconnected micro-pores of electrospun nanofibrous membrane insurances large surface area for immobilization of specific antibody for efficient exosome capturing. The efficacy of exosome isolation is determined by direct ELISA and compared with ultracentrifugation technique. For the exosome isolation, it was observed that over 87% of exosomes existed in the culture medium can be effectively isolated by coaxial electrospun nanofibers with the average thickness of 50 µm. Therefore, this promising technique can be substituted for the traditional techniques for exosome isolation which are mostly suffering from low efficacy, high cost, and troublesome process.

Conjugated Copolymers through Electrospinning Synthetic Strategies and Their Versatile Applications in Sensing Environmental Toxicants, pH, Temperature, and Humidity

Conjugated copolymers (CCPs) are a class of polymers with excellent optical luminescent and electrical conducting properties because of their extensive π conjugation. CCPs have several advantages such as facile synthesis, structural tailorability, processability, and ease of device fabrication by compatible solvents. Electrospinning (ES) is a versatile technique that produces continuous high throughput nanofibers or microfibers and its appropriate synchronization with CCPs can aid in harvesting an ideal sensory nanofiber. The ES-based nanofibrous membrane enables sensors to accomplish ultrahigh sensitivity and response time with the aid of a greater surface-to-volume ratio. This review covers the crucial aspects of designing highly responsive optical sensors that includes synthetic strategies, sensor fabrication, mechanistic aspects, sensing modes, and recent sensing trends in monitoring environmental toxicants, pH, temperature, and humidity. In particular, considerable attention is being paid on classifying the ES-based optical sensor fabrication to overcome remaining challenges such as sensitivity, selectivity, dye leaching, instability, and reversibility.

Fluorescent Chemosensor for Dual-Channel Discrimination between Phosgene and Triphosgene

As highly toxic and accessible chemical reagents, phosgene and triphosgene have become a serious threat to public safety. So, it is highly desirable to develop facile methods to detect and recognize them. In this article, a novel fluorescent chemosensor, Phos-4, has been constructed with 1,8-naphthalimide as the fluorophore and 2-(2-aminophenyl)imidazol as the recognition sites for discrimination between phosgene and triphosgene in a dual-channel mode for the first time. Owing to the difference in electrophilicity between chlorocarbonyl and trichloromethoxycarbonyl, the sensing reaction of Phos-4 with phosgene undergoes two carbamylations to afford a cyclic product with green fluorescence, and only one carbamylation occurs for triphosgene to form a noncyclic product with blue fluorescence. The sensor Phos-4 exhibits high sensitivity (the limit of detection, 3.2 nM, for phosgene, and 1.9 nM, for triphosgene) and high selectivity in solutions. Furthermore, facile test papers containing Phos-4-embedded nanofibrous membrane have been fabricated by the electrospinning technology. The test papers can provide visual and selective detection of phosgene with a lower limit of detection (42 ppb) and a faster response (≤10 s) in the gas phase over those in solutions. The test paper with Phos-4 is promising to be a practical detection tool of gaseous phosgene.

Detection of Sudan Dyes Based on Inner-Filter Effect with Reusable Conjugated Polymer Fibrous Membranes

Developing effective methods for detecting illegal additives in food or seasoning is of great significance. In this study, a sensing strategy for selective detection of Sudan dyes was designed based on the fluorescence inner-filter effect (IFE) by using poly(phenylenevinylene) (PPV) solid materials in combination with an optimized experimental protocol. Two types of fluorescent solid materials, electrospun fibrous membranes and drop-cast films, were fabricated with PPV as the fluorophore and poly(vinyl alcohol) as the matrix, respectively. Sudan dyes greatly quenched the fluorescence of the membrane and film, whereas other food colorings or possible food ingredients displayed a much smaller or negligible quenching effect. The sensing mechanism was studied, and the selectivity was ascribed to IFE, which requires the overlap between the absorption of the analyte and absorption/emission of the sensing material. The form of materials (membrane or film), the content of PPV, and the cross-linking process did not have much influence on the selectivity and sensitivity, which is consistent with the IFE mechanism and demonstrates the advantage of not requiring strict control of the preparative process. All the cross-linked materials were found to be stable against water/humidity and displayed good reversibility in sensing and can be reused at least for 10 cycles with negligible influence on the sensing performance. A cross-linked membrane was selected for detecting Sudan dyes in chili powder because folding did not affect the mechanical stability of the membrane. Two different protocols were used to pretreat the chili samples, which allowed the detection of Sudan dyes in chili powder as well as the discrimination of Sudan dyes from synthetic food coloring such as allura red. This study provides a facile and cost-effective method for preparing reusable sensing materials for detecting some dyes in commercial foods or food seasonings.

Synthesis of fluorescent conjugated polymer nanoparticles and their immobilization on a substrate for white light emission

Fluorescent conjugated polymers (CPs) for blue, green, and red emission were polymerized via the Suzuki coupling reaction.

Surface-engineered quantum dots/electrospun nanofibers as a networked fluorescence aptasensing platform toward biomarkers

A membrane-based fluorescent sensing platform is a facile, point-of-care and promising technique in chemo/bio-analytical fields. However, the existing fluorescence sensing films for cancer biomarkers have several problems, with dissatisfactory sensitivity and selectivity, low utilization of probes encapsulated in films as well as the tedious design of membrane structures. In this work, a novel fluorescence sensing platform is fabricated by bio-grafting quantum dots (QDs) onto the surface of electrospun nanofibers (NFs). The aptamer integrated into the QDs/NFs can result in high specificity for recognizing and capturing biomarkers. Partially complementary DNA-attached gold nanoparticles (AuNPs) are employed to efficiently hybridize with the remaining aptamer to quench the fluorescence of QDs by nanometal surface energy transfer (NSET) between them both, which are constructed for prostate specific antigen (PSA) assay. Taking advantage of the networked nanostructure of aptamer-QDs/NFs, the fluorescent film can detect PSA with high sensitivity and a detection limit of 0.46 pg mL^-1, which was further applied in real clinical serum samples. Coupling the surface grafted techniques to the advanced network nanostructure of electrospun NFs, the proposed aptasensing platform can be easily extended to achieve sensitive and selective assays for other biomarkers.

Photoswitchable Emission Color Change in Nanodots Containing Conjugated Polymer and Photochrome

A simple approach for the preparation of conjugated polymer (CP)-based fluorescent nanodots containing photochrome (dithienylethene, DTE) is reported. The CP in the nanodots was designed to exhibit dual emissions of blue and green. The photochromic, fluorescent, composite nanodots (PNDs) were able to tune the emission color from green to blue using selective energy transfer from the CP to DTE under ultraviolet (UV) irradiation. The UV-irradiation-induced ring closure of the DTE within the PNDs provided a spectral overlap between the green emission of the CP and the absorption of DTE, leading to quenching of the green emission and, concomitantly, maintaining of the blue emission. The photoswitchable fluorescent PNDs with high on-off green fluorescence contrast were successfully applied in a living zebrafish imaging. Our design strategy provided a versatile tool for constructing a special photomodulated color-changeable nanostructure in bioimaging.

Photophysical Diversity of Water-Soluble Fluorescent Conjugated Polymers Induced by Surfactant Stabilizers for Rapid and Highly Selective Determination of 2,4,6-Trinitrotoluene Traces

The increasing application of fluorescence spectroscopy in development of reliable sensing platforms has triggered a lot of research interest for the synthesis of advanced fluorescent materials. Herein, we report a simple, low-cost strategy for the synthesis of a series of water-soluble conjugated polymer nanoparticles with diverse emission range using cationic (hexadecyltrimethylammonium bromide, CTAB), anionic (sodium dodecylbenzenesulfonate, SDBS), and nonionic (TX114) surfactants as the stabilizing agents. The role of surfactant type on the photophisical and sensing properties of resultant polymers has been investigated using dynamic light scattering (DLS), FT-IR, UV-vis, fluorescence, and energy dispersive X-ray (EDS) spectroscopies. The results show that the surface polarity, size, and spectroscopic and sensing properties of conjugated polymers could be well controlled by the proper selection of the stabilizer type. The fluorescent conjugated polymers exhibited fluorescence quenching toward nitroaromatic compounds. Further studies on the fluorescence properties of conjugated polymers revealed that the emission of the SDBS stabilized polymer, N-methylpolypyrrole-SDBS (NMPPY-SDBS), is strongly quenched by 2,4,6-trinitrotoluene molecule with a large Stern -Volmer constant of 59 526 M(-1) and an excellent detection limit of 100 nM. UV-vis and cyclic voltammetry measurements unveiled that fluorescence quenching occurs through a charge transfer mechanism between electron rich NMPPY-SDBS and electron deficient 2,4,6-trinitrotoluene molecules. Finally, the as-prepared conjugated polymer and approach were successfully applied to the determination of 2,4,6-trinitrotoluene in real water samples.

Luminescent films for chemo- and biosensing

Luminescent films have received great interest for chemo-/bio-sensing applications due to their distinct advantages over solution-based probes, such as good stability and portability, tunable shape and size, non-invasion, real-time detection, extensive suitability in gas/vapor sensing, and recycling. On the other hand, they can achieve selective and sensitive detection of chemical/biological species using special luminophores with a recognition moiety or the assembly of common luminophores and functional materials. Nowadays, the extensively used assembly techniques include drop-casting/spin-coating, Langmuir-Blodgett (LB), self-assembled monolayers (SAMs), layer-by-layer (LBL), and electrospinning. Therefore, this review summarizes the recent advances in luminescent films with these assembly techniques and their applications in chemo-/bio-sensing. We mainly focused on the discussion of the relationship between the sensing properties of the films and their architecture. Furthermore, we discussed some critical challenges existing in this field and possible solutions that have been or are being developed to overcome these challenges.

Designed Synthesis of In₂O₃ Beads@TiO₂-In₂O₃ Composite Nanofibers for High Performance NO₂ Sensor at Room Temperature

Porous single crystal In2O3 beads@TiO2-In2O3 composite nanofibers (TINFs) have been prepared via a facile electrospinning method. The beads were formed because of the existence of hemimicelles in pecursor solution. The formation of hemimicelles was attributed to the synergy of tetrabutyl titanate (TBT) and polyvinylpyrrolidone (PVP). Abundant In(3+) ions were drawn toward the ketonic oxygen of PVP resulting in In(3+) ions aggregation. Compared with pristine In2O3 nanofibers (INFs), the as-prepared TINFs exhibited excellent properties for sensing NO2 gas at room temperature (25 °C). The enhanced sensing property was due to much absorbed oxygen and Schottky junctions between the porous single crystal In2O3 beads and the Au electrode of the sensor. The strategy for combining the unique In2O3 beads@TiO2-In2O3 nanofibers structure which possessed superior conductivity and sufficient electrons with the addition of TiO2 offered an innovation to enhance the gas sensing performance.

Immobilization of gold nanoclusters inside porous electrospun fibers for selective detection of Cu(II): A strategic approach to shielding pristine performance

Here, a distinct demonstration of highly sensitive and selective detection of copper (Cu²⁺) in a vastly porous cellulose acetate fibers (pCAF) has been carried out using dithiothreitol capped gold nanocluster (DTT.AuNC) as fluorescent probe. A careful optimization of all potential factors affecting the performance of the probe for effective detection of Cu²⁺ were studied and the resultant sensor strip exhibiting unique features including high stability, retained parent fluorescence nature and reproducibility. The visual colorimetric detection of Cu²⁺ in water, presenting the selective sensing performance towards Cu²⁺ ions over Zn²⁺, Cd²⁺ and Hg²⁺ under UV light in naked eye, contrast to other metal ions that didn’t significantly produce such a change. The comparative sensing performance of DTT.AuNC@pCAF, keeping the nonporous CA fiber (DTT.AuNC@nCAF) as a support matrix has been demonstrated. The resulting weak response of DTT.AuNC@nCAF denotes the lack of ligand protection leading to the poor coordination ability with Cu²⁺. The determined detection limit (50 ppb) is far lower than the maximum level of Cu²⁺ in drinking water (1.3 ppm) set by U.S. Environmental Protection Agency (EPA). An interesting find from this study has been the specific oxidation nature between Cu²⁺ and DTT.AuNC, offering solid evidence for selective sensors.