Boosting performance of low temperature fuel cell catalysts by subtle ionic liquid modification

Co-presence of PtNi nanowires and ionic liquid in carbon mesopores enhances electrocatalytic oxygen reduction activity

The electrocatalytic activity of PtNi nanowires is enhanced by the co-presence of ionic liquid in carbon mesopores. Three-dimensional transmission electron microscopy tomography and surface-enhanced infrared absorption spectroscopy confirm the co-presence of PtNi nanowires and ionic liquid inside carbon mesopores even under electrochemical conditions.

Enhancing Polymer Electrolyte Membrane Fuel Cells with Ionic Liquids: A Review

Polymer electrolyte membrane fuel cells (PEMFCs) represent a promising clean energy solution. However, their widespread adoption faces hurdles related to component optimization. This review explores the pivotal role of ionic liquids (ILs) in enhancing PEMFC performance, focusing on their role in polymer electrolyte membranes, catalyst modification, and other components. By addressing key obstacles, including proton conductivity, catalyst stability, and fuel crossover, ILs provide a pathway towards the widespread commercialization of PEMFCs. In the realm of PEMFC membranes, ILs have shown great potential in improving proton conductivity, mechanical strength, and thermal stability. Additionally, the utilization of ILs as catalyst modifiers has shown promise in enhancing the electrocatalytic activity of electrodes by serving as an effective stabilizer to promote the dispersion of metal nanoparticles, and reduce their agglomeration, thereby augmenting catalytic performance. Furthermore, ILs can be tailored to optimize the catalyst-support interaction, ultimately enhancing the overall fuel cell efficiency. Their unique properties, such as high oxygen solubility and low volatility, offer advantages in terms of reducing mass transport and water management issues. This review not only underscores the promising advancements achieved thus far but also outlines the challenges that must be addressed to unlock the full potential of ILs in PEMFC technology, offering a valuable resource for researchers and engineers working toward the realization of efficient and durable PEMFCs.

Elucidation of the mechanism of melamine adsorption on Pt(111) surface via density functional theory calculations

The oxygen reduction reaction (ORR) activity of Pt catalysts in polymer electrolyte fuel cells (PEFCs) should be enhanced to reduce Pt usage. The adsorption of heteroaromatic ring compounds such as melamine on the Pt surface can enhance its catalytic activity. However, melamine adsorption on Pt and the consequent ORR enhancement mechanism remain unclear. In this study, we performed density functional theory calculations to determine the adsorption structures of melamine/Pt(111). Melamine was coordinated to Pt via two N lone pairs on NH2 and N- in the triazine ring, resulting in a chemisorption structure with slight electron transfer. Four types of adsorption structures were identified: three-point adsorption (two amino groups and a triazine ring: Type A), two-point adsorption (one amino group and a triazine ring: Type B), two-point adsorption (two amino groups: Type C), and one-point adsorption (one amino group: Type D). The most stable structure was Type B. However, multiple intermediate structures were formed owing to the conformational changes from the most stable to other stable adsorption structures. The resonance structures of the adsorbed melamine stabilise the adsorption, as increased resonance allows for more electron delocalisation. In addition, the lone-pair orbital of the amino group in the adsorbed melamine acquires the characteristics of an sp3 hybrid orbital, which prevents horizontal adsorption on the Pt surface. We believe that understanding these adsorption mechanisms will help in the molecular design of organic molecule-decorated Pt catalysts and will lead to the reduction of Pt usage in PEFCs.

Increasing Accessible Active Site Density of Non-Precious Metal Oxygen Reduction Reaction Catalysts through Ionic Liquid Modification

Non-precious metal catalysts show great promise to replace the state-of-the-art Pt-based catalysts for catalyzing the oxygen reduction reaction (ORR), while their catalytic activity still needs to be greatly improved before their broad-based application. Here, we report a facile approach to improving the performance of zeolitic imidazolate framework-derived carbon (ZDC) toward the ORR by incorporating a small amount of ionic liquid (IL). The IL would preferentially fill the micropores of ZDC and greatly enhance the utilization of the active sites within the micropores, which are initially not accessible due to insufficient surface wetting. It is also disclosed that the ORR activity in terms of kinetic current at 0.85 V depends on the loading amount of the IL, and the maximum activity is obtained at a mass ratio of IL to ZDC at 1.2. The optimum stems from the counterbalance between the enhanced utilization of the active sites within the micropores and the retarded diffusion of the reactants within the IL phase due to its high viscosity.

Thermal Stability and CO Permeability of [C4C1Pyr][NTf2]/Pd(111) Model SCILLs: from UHV to Ambient Pressure

Solid catalysts with ionic liquid layers (SCILLs) are heterogeneous catalysts which benefit significantly in terms of selectivity from a thin coating of an ionic liquid (IL). In the present work, we study the interaction of CO with a Pd model SCILL consisting of a 1-butyl-1-methylpyrrolidinium bis(trifluoromethylsulfonyl)-imide ([C4C1Pyr][NTf2]) film deposited on Pd(111). We investigate the CO permeability and stability of the IL film via pressure modulation experiments by infrared reflection absorption spectroscopy (IRAS) in ultrahigh vacuum (UHV) and at ambient pressure conditions by time-resolved, temperature-programmed, and polarization-modulated (PM) IRAS experiments. In addition, we performed molecular dynamics (MD) simulations to identify adsorption motifs, their abundance, and the influence of CO. We find a strongly bound IL wetting monolayer (ML) and a potentially dewetting multilayer. Molecular reorientation of the IL at the interface and multilayer dewetting allow for the accumulation of CO at the metal/IL interface. Our results confirm that co-adsorption of CO changes the molecular structure of the IL wetting layer which confirms the importance to study model SCILL systems under in situ conditions.

Graphical abstract

Mechanistic Studies of Improving Pt Catalyst Stability at High Potential via Designing Hydrophobic Micro-Environment with Ionic Liquid in PEMFC

Recently, the focus of fuel cell technologies has shifted from light-duty automotive to heavy-duty vehicle applications, which require improving the stability of membrane electrode assemblies (MEAs) at high constant potential. The hydrophilicity of Pt makes it easy to combine with water molecules and then oxidize at high potential, resulting in poor durability of the catalyst. In this work, an ionic liquid [BMIM][NTF2] was used to modify the Pt catalyst (Pt/C + IL) to create a hydrophobic, antioxidant micro-environment in the catalyst layer (CL). The effect of [BMIM][NTF2] on the decay of the CL performance at high constant potential (0.85 V) for a long time was investigated. It was found that the performance attenuation of Pt/C + IL in the high-potential range (OCV 0.75 V) was less than that of commercial Pt/C after 10 h. The Pt-oxide coverage test showed that the hydrophobic micro-environment of the CL enhanced the stability by inhibiting Pt oxidation. In addition, the electrochemical recovery of Pt oxides showed that the content of recoverable oxides in Pt/C + IL was higher than that in commercial Pt/C. Overall, modifying the Pt catalyst with hydrophobic ionic liquid is an effective strategy to improve the catalyst stability and reduce the irreversible voltage loss caused by the oxide at high constant potential.

Revealing the role of ionic liquids in promoting fuel cell catalysts reactivity and durability

Ionic liquids (ILs) have shown to be promising additives to the catalyst layer to enhance oxygen reduction reaction in polymer electrolyte fuel cells. However, fundamental understanding of their role in complex catalyst layers in practically relevant membrane electrode assembly environment is needed for rational design of highly durable and active platinum-based catalysts. Here we explore three imidazolium-derived ionic liquids, selected for their high proton conductivity and oxygen solubility, and incorporate them into high surface area carbon black support. Further, we establish a correlation between the physical properties and electrochemical performance of the ionic liquid-modified catalysts by providing direct evidence of ionic liquids role in altering hydrophilic/hydrophobic interactions within the catalyst layer interface. The resulting catalyst with optimized interface design achieved a high mass activity of 347 A g-1Pt at 0.9 V under H2/O2, power density of 0.909 W cm-2 under H2/air and 1.5 bar, and had only 0.11 V potential decrease at 0.8 A cm-2 after 30 k accelerated stress test cycles. This performance stems from substantial enhancement in Pt utilization, which is buried inside the mesopores and is now accessible due to ILs addition.

Determination of benzimidazoles in fruits by open-tubular capillary electrochromatography based on ionic liquids grafted covalent organic frameworks

A novel capillary electrochromatography method has been developed for the simultaneous quantification of ten benzimidazole fungicides in fruits. Herein, covalent organic frameworks (COFs) and ionic liquids (ILs) were successfully introduced to prepare open-tubular capillary column to improve the loading capacity and separation performance. The parameters effecting the analytical performance including pH and concentration of running buffer, separation voltage and the addition of organic solvent were investigated systematically. Under the optimized conditions, the method allowed the baseline separation of ten benzimidazole fungicides, and showed a good linearity in the range of 3.5-200 μg kg^-1 with the detection limits between 1.0 and 2.8 μg kg^-1. The intraday and interday precisions for recoveries were lower than 7.9% and 12.2%, respectively. Intraday and interday precisions for their retention times were lower than 3.2% and 6.6%, respectively. Satisfactory recoveries for grape, pear and orange samples at two concentrations were obtained ranging from 85.0 to 95.9% with RSDs lower than 7.8%, demonstrating the potential applications of the open-tubular capillary electrochromatography method for trace benzimidazole fungicides analysis in fruits.

Impact of sp2 carbon material species on Pt nanoparticle-based electrocatalysts produced by one-pot pyrolysis methods with ionic liquids

Pt-nanoparticle-supported graphene nanoplatelets (Pt/GNPs) and multiwalled carbon nanotube composite (Pt/MWCNTs) electrocatalysts for the oxygen reduction reaction (ORR) can be prepared using a one-pot method through the pyrolytic decomposition of the platinum precursor, platinum(ii) bis(acetylacetonate) (Pt(acac)2) in 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)amide ([C4mim][Tf2N]) or N,N,N-trimethyl-N-propylammonium bis(trifluoromethanesulfonyl)amide ([N1,1,1,3][Tf2N]) ionic liquids (ILs) with the target sp2 carbon support. In this one-pot pyrolysis method, which does not require any reagents to reduce Pt metal precursors or stabilize Pt nanoparticles, Pt nanoparticles are readily immobilized onto the sp2 surface by a thin IL layer formed at the interface, which can work as a binder. We used three types of sp2 carbon materials with different geometric shapes (graphene nanoplatelets with <3 (GNPs-3) and 18-24 layers (GNPs-20) and multiwalled carbon nanotubes (MWCNTs)) to investigate Pt nanoparticle formation and anchoring. All the electrocatalysts, especially Pt/MWCNTs, showed higher durability than the commercial catalyst owing to the combined effect of the IL binder and sp2 carbon materials. Our findings strongly suggest that the original carbon surface properties are also an important factor for creating high-performance ORR electrocatalysts.

Interaction Regulation Between Ionomer Binder and Catalyst: Active Triple-Phase Boundary and High Performance Catalyst Layer for Anion Exchange Membrane Fuel Cells

As one of the most crucial components, the catalyst layer (CL) plays a critical role in the performance of anion exchange membrane fuel cells (AEMFCs). However, the effect of the structural evolution of ionomer binder on the micromorphology and catalytic activity of CL is yet to be clarified. In this study, pyrrolidinum and quaternary ammonium cations are attached to the polyphenylene oxide (PPO) backbone through flexible spacer units (five, seven, or nine carbon atoms) with different terminal alkyl groups. The Van der Waals force and electrostatic repulsion between the ionomer binder and catalyst are regulated through the flexible spacer units and terminal alkyl groups to alleviate the agglomeration of catalyst particles and acquire a high catalytic activity. To evaluate the electrochemical stability of the cationic groups, the alkaline stability of the ionomer binder is tested under a constant voltage to simulate the true operational environment of the fuel cells. The results reveal that the degradation of the cation groups of ionomer binder is accelerated under a constant voltage condition. This phenomenon in neglect earlier, may serve as a useful reference for the synthesis and performance enhancement of ionomer binders.

The Activity Enhancement Effect of Ionic Liquids on Oxygen Reduction Reaction Catalysts: From Rotating Disk Electrode to Membrane Electrode Assembly

Ionic liquids (ILs) have been explored as a surface modification strategy to promote the oxygen reduction reaction (ORR) on Pt/C and their chemical structures were identified to have strong influence on the ORR activities. To better understand the roles of anion and cation of ILs on the catalytic reaction, two cations ([MTBD]+ and [bmim]+) were paired with three anions ([TFSI]−, [beti]−, and [C4F9SO3]−) to form various IL structures. By systematically varying the IL combinations and studying their effects on the electrochemical behaviors, such as electrochemical surface area and specific ORR activities, it was found that cation structure had a higher influence than anion, and the impact of the [MTBD]+ series was stronger than the [bmim]+ series. In addition to the investigation in the half-cell, studies were also extended to the membrane electrode assembly (MEA). Considerable performance enhancements were demonstrated in both the kinetic region and high current density region with the aid of IL. This work suggests that IL modification can provide a complementary approach to improve the performance of proton exchange membrane fuel cells.

Improving the Separation of CO2/CH4 Using Impregnation of Deep Eutectic Solvents on Porous Carbon

The separation of CO₂/CH₄ using porous carbon can be increased by the presence of a functional group of nitrogen on the carbon surface. This study explores the potential of porous carbon derived from the palm kernel shell (C-PKS) impregnated with a deep eutectic solvent (DES), which is one of the chemicals containing a nitrogen element. The DES was composed of a quaternary ammonium salt of choline chloride (ChCl) and a hydrogen bond donor of alcohol. Three alcohols of 1-butanol (-ol), ethylene glycol (-diol), and glycerol (-triol) were employed to study the effects of a number of hydroxyl groups in the separation performance. The research steps included (i) the preparation of DES-impregnated porous carbon synthesized from the palm kernel shell (DES/C-PKS), (ii) characterization of the material, and (ii) a separation test of CO₂/CH₄ with a breakthrough system. Materials were characterized using scanning electron microscopy (SEM) combined with energy-dispersive X-ray spectroscopy (EDX), N₂-sorption analysis, and Fourier transform infrared (FTIR) spectroscopy. SEM images showed a significant morphological difference of pristine carbon and DES/C-PKS. There was a significant decrease in the range of 67-73% of a specific surface area with respect to pristine carbon, having initially 800 m²/g. However, the N element on the carbon surface increased after impregnation treatment, which was shown from the intensity of the FTIR graphs and EDX analysis. Adsorption isotherm revealed that DES/C-PKS could enhance up to 1.6 times the adsorption capacity of CO₂ at 1 atm and 30 °C while increasing the selectivity of CO₂/CH₄ up to 125%. The breakthrough experiment showed that all DES/C-PKS materials displayed a better performance for the separation of CO₂/CH₄, indicated by a longer breakthrough time and enhancement of CO₂ uptake. The best separation performance was achieved by DES/C-PKS using glycerol as a hydrogen bond donor with 15.4 mg/g of CO₂ uptake or equivalent to 95% enhancement of the uptake capacity compared to pristine porous carbon. Also, the cycling test revealed that DES/C-PKS can be used repetitively, which further highlights the efficiency of the material for the separation of CO₂/CH₄.

Probing CO2 Reduction Pathways for Copper Catalysis Using an Ionic Liquid as a Chemical Trapping Agent

The key to fully leveraging the potential of the electrochemical CO2 reduction reaction (CO2RR) to achieve a sustainable solar-power-based economy is the development of high-performance electrocatalysts. The development process relies heavily on trial and error methods due to poor mechanistic understanding of the reaction. Demonstrated here is that ionic liquids (ILs) can be employed as a chemical trapping agent to probe CO2RR mechanistic pathways. This method is implemented by introducing a small amount of an IL ([BMIm][NTf2 ]) to a copper foam catalyst, on which a wide range of CO2RR products, including formate, CO, alcohols, and hydrocarbons, can be produced. The IL can selectively suppress the formation of ethylene, ethanol and n-propanol while having little impact on others. Thus, reaction networks leading to various products can be disentangled. The results shed new light on the mechanistic understanding of the CO2RR, and provide guidelines for modulating the CO2RR properties. Chemical trapping using an IL adds to the toolbox to deduce the mechanistic understanding of electrocatalysis and could be applied to other reactions as well.

Paper-based microfluidic aluminum-air batteries: toward next-generation miniaturized power supply

Paper-based microfluidics (lab on paper) emerges as an innovative platform for building small-scale devices for sensing, diagnosis, and energy storage/conversions due to the power-free fluidic transport capability of paper via capillary action. Herein, we report for the first time that paper-based microfluidic concept can be employed to fabricate high-performing aluminum-air batteries, which entails the use of a thin sheet of fibrous capillary paper sandwiched between an aluminum foil anode and a catalyst coated graphite foil cathode without using any costly air electrode or external pump device for fluid transport. The unique microfluidic configuration can help overcome the major drawbacks of conventional aluminum-air batteries including battery self-discharge, product-induced electrode passivation, and expensive and complex air electrodes which have long been considered as grand obstacles to aluminum-air batteries penetrating the market. The paper-based microfluidic aluminum-air batteries are not only miniaturized in size, easy to fabricate and cost-effective, but they are also capable of high electrochemical performance. With a specific capacity of 2750 A h kg-1 (@20 mA cm-2) and an energy density of 2900 W h kg-1, they are 8.3 and 12.6 times higher than those of the non-fluidic counterpart and significantly outperform many other miniaturized energy sources, respectively. The superior performance of microfluidic aluminum-air batteries originates from the remarkable efficiency of paper capillarity in transporting electrolyte along with O2 to electrodes.

Activated Carbon in the Third Dimension-3D Printing of a Tuned Porous Carbon

A method for obtaining hierarchically structured porous carbons, employing 3D printing to control the structure down to the lower µm scale, is presented. To successfully 3D print a polymer precursor and transfer it to a highly stable and structurally conformal carbon material, stereolithography 3D printing and photoinduced copolymerization of pentaerythritol tetraacrylate and divinylbenzene are employed. Mechanically stable structures result and a resolution of ≈15 µm is demonstrated. This approach can be combined with liquid porogen templating to control the amount and size (up to ≈100 nm) of transport pores in the final carbonaceous material. Additional CO2 activation enables high surface area materials (up to 2200 m2 g-1) that show the 3D printing controlled µm structure and nm sized transport pores. This unique flexibility holds promise for the identification of optimal carbonaceous structures for energy application, catalysis, and adsorption.

Effect of Ionic Liquid Modification on the ORR Performance and Degradation Mechanism of Trimetallic PtNiMo/C Catalysts

Ionic liquids (ILs) modification, following the concept of “solid catalyst with ionic liquid layer (SCILL)”, has been demonstrated to be an effective approach to improving both activity and stability of Pt-based catalysts for the oxygen reduction reaction. In this work, the SCILL concept has been applied to a trimetallic PtNiMo/C system, which has been documented recently to be significantly advantageous over the benchmark PtNi-based catalysts for oxygen reduction. To achieve this, two hydrophobic ILs ([BMIM][NTF2] and [MTBD][BETI]) were used to modify PtNiMo/C with four IL-loading amounts between 7 and 38 wt %. We found that the Pt mass activity (@0.9 V) could be improved by up to 50% with [BMIM][NTF2] and even 70% when [MTBD][BETI] is used. Exceeding a specific IL loading amount, however, leads to a mass transport related activity drop. Moreover, it is also disclosed that both ILs can effectively suppress the formation of nonreactive oxygenated species, while at the same time imposing little effect on the electrochemical active surface area. For a deeper understanding of the degradation mechanism of pristine and IL modified PtNiMo/C, we applied identical location transmission electron microscopy and in situ scanning flow cell coupled to inductively coupled plasma mass spectrometry techniques. It is disclosed that the presence of ILs has selectively accelerated the dissolution of Mo and eventually results in a more severe degradation of PtNiMo/C. This shows that future research needs to identify ILs that prevent the Mo dissolution to leverage the potential of the IL modification of PtNiMo catalysts.

Improving Oxygen Reduction Performance by Using Protic Poly(Ionic Liquid) as Proton Conductors

Improving catalytic performance of the oxygen reduction reaction (ORR) of Pt/C catalysts is essential for reducing Pt-loading and the according cost of proton exchange membrane fuel cells (PEMFCs). Herein, we report a new conceptual design of catalyst layers to improve the ORR performance of Pt/C catalysts by replacing perfluorosulfonated ionomers with protic poly(ionic liquid) as a proton conductor. The specific activity of the designed catalyst at 0.9 V under acidic conditions is over three times higher than that of catalyst using Nafion as the proton conductor. Furthermore, the durability test reveals that the introduction of protic poly(ionic liquid) ionomers can protect Pt nanoparticles against aggregation during potential cycles, but it is less durable than Nafion because of the nature of hydrocarbons. Nevertheless, we believe that replacing perfluorosulfonated ionomers with protic poly(ionic liquid) as proton conductors could be a promising strategy to design an efficient cathode for low Pt-loading PEMFCs.

Engineering the Interface of Carbon Electrocatalysts at the Triple Point for Enhanced Oxygen Reduction Reaction

The aqueous oxygen reduction reaction (ORR) has recently received increased attention due to its critical role in clean and sustainable energy-generation technologies, such as proton exchange membranes (PEM) fuel cells, alkaline fuel cells and Zn-air batteries. The sluggish kinetics associated with ORR result from multistep electron-transfer process. The slow kinetics are partially related to the O₂ adsorption process onto the catalyst, which happens at the triple-phase boundary (TPB) of the electrocatalyst-electrolyte-oxygen interface. Hence, tremendous efforts have been devoted to improving the intrinsic properties of electrocatalysts such as active sites, electrical conductivity and porosity. Engineering the electrocatalyst's interfacial properties is another critical issue in ORR, however less described in the literature. The surface of the catalyst provides the microenvironment for the triple boundary interface reaction, which directly influences its electrocatalytic activity and the kinetics. This Minireview is a summary of the existing literature on manipulating the interfacial surface of non-precious metal catalysts at the triple point between the solid catalyst, the aqueous electrolyte and the O₂ gas with the aim of improving the ORR efficiency. Various approaches towards improving the wettability and nanostructuring the catalyst surface to boost the activity of the surface-active sites and provide improved stability are discussed.

Tuning the Electrocatalytic Performance of Ionic Liquid Modified Pt Catalysts for the Oxygen Reduction Reaction via Cationic Chain Engineering

Modifying Pt catalysts using hydrophobic ionic liquids (ILs) has been demonstrated to be a facile approach for boosting the performance of Pt catalysts for the oxygen reduction reaction (ORR). This work aims to deepen the understanding and initiate a rational molecular tuning of ILs for improved activity and stability. To this end, Pt/C catalysts were modified using a variety of 1-methyl-3-alkylimidazolium bis(trifluoromethanesulfonyl)imide ([C _n C₁im][NTf₂], n = 2-10) ILs with varying alkyl chain lengths in imidazolium cations, and the electrocatalytic properties (e.g., electrochemically active surface area, catalytic activity, and stability) of the resultant catalysts were systematically investigated. We found that ILs with long cationic chains (C6, C10) efficiently suppressed the formation of nonreactive oxygenated species on Pt; however, at the same time they blocked active Pt sites and led to a lower electrochemically active surface area. It is also disclosed that the catalytic activity strongly correlates with the alkyl chain length of cations, and a distinct dependence of intrinsic activity on the alkyl chain length was identified, with the maximum activity obtained on Pt/C-[C₄C₁im][NTf₂]. The optimum arises from the counterbalance between more efficient suppression of oxygenated species formation on Pt surfaces and more severe passivation of Pt surfaces with elongation of the alkyl chain length in imidazolium cations. Moreover, the presence of an IL can also improve the electrochemical stability of Pt catalysts by suppressing the Pt dissolution, as revealed by combined identical-location transmission electron microscopy (TEM) and in situ inductively coupled plasma mass spectrometry (ICP-MS) analyses.

Boosting the oxygen evolution reaction performance of CoS2 microspheres by subtle ionic liquid modification

Owing to the hydrophobic environment and electrostatic affinity generated at the CoS₂/electrolyte interface, the OER performance of CoS₂ microspheres is boosted by IL modification.

Gluing Ionic Liquids to Oxide Surfaces: Chemical Anchoring of Functionalized Ionic Liquids by Vapor Deposition onto Cobalt(II) Oxide

Ionic liquids (IL) hold a great potential as novel electrolytes for applications in electronic materials and energy technology. The functionality of ILs in these applications relies on their interface to semiconducting nanomaterials. Therefore, methods to control the chemistry and structure of this interface are the key to assemble new IL-based electronic and electrochemical materials. Here, we present a new method to prepare a chemically well-defined interface between an oxide and an IL film. An imidazolium-based IL, which is carrying an ester group, is deposited onto cobalt oxide surface by evaporation. The IL binds covalently to the surface by thermally activated cleavage of the ester group and formation of a bridging carboxylate. The anchoring reaction shows high structure sensitivity, which implies that the IL film can be adhered selectively to specific oxide surfaces.

Application of polymer-based membranes containing ionic liquids in membrane separation processes: a critical review

The interest in ionic liquids, particularly in polymerizable ionic liquids, is motivated by their unique properties, such as good thermal stability, negligible vapor pressure, and wide electrochemical window. Due to these features ionic liquids were proposed to be used in the membrane separation technology. The utilization of conventional ionic liquids is, however, limited by their release from the membrane during the given separation process. Therefore, the incorporation of polymerizable ionic liquids may overcome this drawback for the industrial application. This work is a comprehensive overview of the advances of ionic liquid membranes for the separation of various compounds, i.e. gases, organic compounds, and metal ions.

A Novel Poly(ionic liquid) Interface-Free Two-Dimensional Monolithic Material for the Separation of Multiple Types of Glycoproteins

Currently, many types of affinity materials have been developed for the enrichment of glycoproteins potentially considered to be clinical biomarkers; however, they can not effectively distinguish between different glycoproteins and thus lack the functionality that may be the key to the diagnosis of specific diseases. In the present work, a novel interface-free 2D monolithic material has been developed for the separation of multiple types of glycoproteins, in which boronate-functionalized graphene acts as preconcentration segment and poly(guanidinium ionic liquid) acts as separation segment. The resultant 2D material was characterized by X-ray photoelectron spectroscopy, elemental analysis, and electroosmotic flow analysis to demonstrate successful modification at each step. The performance of this 2D material was evaluated by capillary electrochromatography and allowed the successful online concentration and separation of five standard glycoproteins. The high separation efficiency can be largely attributed to the good orthogonality of boronate-functionalized graphene monolith and poly(guanidinium ionic liquid) monolith.