Fabrication of Au@Ag core/shell nanoparticles decorated TiO2 hollow structure for efficient light-harvesting in dye-sensitized solar cells

Green and sustainable self-cleaning flexible SERS base: Utilized for cyclic-detection of residues on apple surface

Advances in flexible SERS substrates has made it possible to approach the ultimate goal of rapid in-situ monitoring of fruit and vegetable safety, but its vulnerability under laser ablation results in low utilization. In order to solve this problem, a 3D framework of TiO2-doped PVDF\PVP polymer was utilized to self-assemble gold-silver core-shell nanorods (Au@Ag NRs) to prepare a flexible SERS substrate with good physical stability and self-cleaning properties. This substrate showed excellent detection limit and recyclability after the detection of three pesticide residues in apple peel. The LOD of methyl-parathion (MP) was as low as 0.037 ng/cm2, with an RSD of 5.61 % for 5 cycle-detection. The recoveries of two additional pesticides thiram (TMTD) and chlorpyrifos (CPF) were 86.32 %-112.47 %. We hoped that this research will contribute to providing a recyclable and facile method for in-situ analysis of fruit and vegetable surface residues and functional manufacture of flexible SERS substrates.

Rice husk valorization into sustainable Ni@TiO2/biochar nanocomposite for highly selective Pb (II) ions removal from an aqueous media

Herein, we successfully prepared sustainable nanocomposites from agriculture waste (rice husk)-derived biochar precursor, and followed by nickel-doped, base-treated titanium dioxide nanomaterials loading for efficient lead (Pb²⁺) removal from aqueous media. By varying the loading contents of active materials, the optimized sample (Ni_0.01@Na-TiO₂/BC) possessed an efficient Pb²⁺ adsorption capability of 122.3 mg g^-1 under the under optimum adsorption parameters, which is attributable to its specific surface area (138.09 m² g^-1) and excess functional sites. Kinetic and Isothermal examination illustrated that Pb²⁺ adsorption phenomena was well followed through pseudo 2nd order and Langmuir models. In addition, superior Pb²⁺ ions adsorption selectivity was recorded by optimized sample in a multi-metallic system over other existing ion (such as Cd²⁺, Mg²⁺, Ca²⁺, Cu²⁺, and Zn²⁺). Desorption experiments has been performed by using desorbing agent that demonstrates the good regeneration ability of sample. Hence, these findings provide new insight for the biowaste management by converting them into innovative adsorbents for commercial scale environmental remediation.

A Review on Nano Ti-Based Oxides for Dark and Photocatalysis: From Photoinduced Processes to Bioimplant Applications

Catalysis on TiO₂ nanomaterials in the presence of H₂O and oxygen plays a crucial role in the advancement of many different fields, such as clean energy technologies, catalysis, disinfection, and bioimplants. Photocatalysis on TiO₂ nanomaterials is well-established and has advanced in the last decades in terms of the understanding of its underlying principles and improvement of its efficiency. Meanwhile, the increasing complexity of modern scientific challenges in disinfection and bioimplants requires a profound mechanistic understanding of both residual and dark catalysis. Here, an overview of the progress made in TiO₂ catalysis is given both in the presence and absence of light. It begins with the mechanisms involving reactive oxygen species (ROS) in TiO₂ photocatalysis. This is followed by improvements in their photocatalytic efficiency due to their nanomorphology and states by enhancing charge separation and increasing light harvesting. A subsection on black TiO₂ nanomaterials and their interesting properties and physics is also included. Progress in residual catalysis and dark catalysis on TiO₂ are then presented. Safety, microbicidal effect, and studies on Ti-oxides for bioimplants are also presented. Finally, conclusions and future perspectives in light of disinfection and bioimplant application are given.

TiO2/AgO composites by one step photo reduction technique as electron transport layers (ETL) for dye-sensitized solar cells

Dye-sensitized solar cell's electron transport layer is responsible for transporting photo-generated electrons to the outer circuit. Utilizing localized surface plasmon resonance (SPR), light absorption could be enhanced to a greater degree, which can drive dye molecules to excited state more effectively than far-field light. In this work, TiO₂ nanoparticles were prepared by solvothermal method, and Ag nanoparticles were decorated over TiO₂ surface through photodeposition method. XRD data of the TiO₂ sample exhibits anatase phase and in the Ag nanoparticle decorated TiO₂ sample, peaks corresponding to (111) planes of Ag was observed. UV-Vis absorption analysis of the TiO₂ and Ag decorated TiO₂ samples showed absorption in the UV region for the TiO_2, and the SPR effect was detected for the Ag deposited TiO₂ samples. Ag nanoparticles decorated over TiO₂ was observed to be spherical in shape through the images from transmission electron microscope. Presence of both Ag and AgO in the prepared sample was revealed through the data from X-ray photoelectron spectroscopy. The prepared material was used as photoanodes in the construction of the DSSCs, and their performance was evaluated.

Core-shell nanostructures: a simplest two-component system with enhanced properties and multiple applications

With the pace of time, synthesis of nanomaterials has paved paths to blend two or more materials having different properties into hybrid nanoparticles. Therefore, it has become possible to combine two different functionalities in a single nanoparticle and their properties can be enhanced or modified by coupling of two different components. Core-shell technology has now represented a new trend in analytical sciences. Core-shell nanostructures are in demand due to their specific design and geometry. They have internal core of one component (metal or biomolecules) surrounded by a shell of another component. Core-shell nanoparticles have great importance due to their high thermal stability, high solubility and lower toxicity. In this review, recent progress in development of new and sophisticated core-shell nanostructures has been explored. The first section covers introduction throwing light on basics of core-shell nanoparticles. Following section classifies core-shell nanostructures into single core/shell, multicore/single shell, single core/multishell and multicore/multishell nanostructures. Next main section gives a brief description on types of core-shell nanomaterials followed by processes for the synthesis of core-shell nanostructures. Ultimately, the final section focuses on the application areas such as drug delivery, bioimaging, solar cell applications etc.

Unravelling the shell growth pathways of Au-Ag core-shell nanoparticles by in situ liquid cell transmission electron microscopy

Controlling the growth, structure and morphology of core-shell nanoparticles (NPs) is significant for catalytic applications and it can be achieved by adding chemical additives to the synthesis reaction mixture. However, achieving precise control over NP synthesis would require a comprehensive understanding of the mechanisms of NP formation under different chemical conditions, which is quite challenging. Here, using in situ liquid cell transmission electron microscopy (TEM), the overgrowth mechanisms of Ag on Au nanobipyramids (NBPs) are studied in AgNO3 aqueous solution with ascorbic acid as the reducing agent. Au-Ag core-shell NPs are formed via two mechanistic modes: (1) atom deposition during which the Ag atoms are deposited directly onto Au NBPs without the addition of poly(vinyl)pyrrolidone (PVP) and (2) nuclei coalescence during which the Ag nanocrystals (NCs) adsorb onto Au NBPs in the presence of PVP. High-resolution imaging reveals the dynamics of the coalescence process of Ag NCs upon addition of PVP. This study helps us to understand the effect of chemical additives during the evolution of a core seed into core-shell NPs with a well-defined composition and shape. It is useful for synthesizing NPs with greater design flexibility and expanding their various technological applications.

Bimetallic Implanted Plasmonic Photoanodes for TiO2 Sensitized Third Generation Solar Cells

An auspicious way to enhance the power conversion efficiency (PCE) of third generation sensitized solar cells is to improve the light harvesting ability of TiO2 sensitizer and inhibition of back recombination reactions. In the present work, we have simultaneously comprehended both the factors using stable bimetallic Au and Ag metal nanoparticles (Mnps) embedded in TiO2 with ion implantation technique at lower fluence range; and explored them in third generation dye sensitized solar cells (DSSCs). The best performing Au-Ag implanted DSSC (Fluence- 6 × 1015 ions cm-2) revealed 87.97% enhancement in its PCE relative to unimplanted DSSC; due to plasmon induced optical and electrical effects of Mnps. Here, optimized bimetallic Au-Ag Mnps embedded in TiO2 improves light harvesting of N719 dye; due to the well matched localized surface plasmon resonance (LSPR) absorption band of Au and Ag with low and high energy absorption bands of N719 dye molecules, respectively. Furthermore, Au and Ag acts as charge separation centers in TiO2 that inhibit the recombination reactions occurring at photoanode/electrolyte interface via prolonging photo-generated electron lifetime; resulting in efficient inter-facial charge transportation in DSSCs.

Study of How Photoelectrodes Modified by TiO2/Ag Nanofibers in Various Structures Enhance the Efficiency of Dye-Sensitized Solar Cells under Low Illumination

Dye-sensitized solar cells (DSSCs) are low-cost solar cells belonging to the thin-film photovoltaic cell type. In this study, we studied the photovoltaic performances of DSSCs based on titanium dioxide (TiO2) nanofibers (NFs) containing silver (Ag) nanoparticles (NPs) under low illumination. We used the sol-gel method with the electrospinning technique to prepare the TiO2 NFs containing Ag NPs. Herein, we used two ways to add TiO2/Ag NFs to modify the photoelectrode successfully and enhance the performance of DSSCs. One way was that the TiO2/Ag NFs were mixed with pristine TiO2; the other way was that the TiO2/Ag NFs were seeded beside the TiO2 colloid layer as an additional layer on the photoelectrode of the DSSC. According to this experiment, the photovoltaic conversion efficiency of the DSSC which had TiO2/Ag NF seeded as an additional layer on the photoelectrode (5.13%) was increased by 28% compared to the DSSC without the photoelectrode modification (3.99%). This was due to the suppression of electron recombination and the more effective utilization of the light radiation by adding the TiO2/Ag NFs. Because of the good conductivity of Ag, the electrons were quickly transported and electron recombination was reduced. In addition, the photovoltaic conversion efficiency of the DSSC which had TiO2/Ag NF seeded as an additional layer on the photoelectrode increased from 5.13% to 6.23% during the decrease in illumination from 100 mW/cm2 to 30 mW/cm2; however, its photovoltaic conversion efficiency decreased to 5.31% when the illumination was lowered to 10 mW/cm2.

Preparation of YbF3-Ho@TiO2 core–shell sub-microcrystal spheres and their application to the electrode of dye-sensitized solar cells

The TiO₂/YbF₃-Ho@TiO₂ heterostructure with light-scattering and NIR-light harvesting characteristics can facilitate charge separation, suppress recombination process and prolong the lifetime of electrons.

In Situ Synthesis of Mesoporous TiO2 Nanofibers Surface-Decorated with AuAg Alloy Nanoparticles Anchored by Heterojunction Exhibiting Enhanced Solar Active Photocatalysis

We designed an electrospinning synthesis protocol to obtain in situ, the mesoporous TiO₂ nanofibers, which are surface-decorated with plasmonic AuAg nanoparticles (AuAg-mTNF-H). Such alloy nanoparticles are found to be partially exposed on the surface of the nanofibers. Characterization by HRTEM and EDS confirmed the formation of 1:1 AuAg alloy nanoparticles on the surface of TiO₂ nanofibers with heterojunction at the interfaces. On the basis of electron microscopic characterization, we proposed that, during the formation of the nanofibers, the incorporated metal ions with surface capping of negative charges migrated toward the outer surface of the nascent fibers under the influence of high positive voltage required for electrospinning. As a result, after the subsequent thermal treatment, the crystallization of TiO₂ nanofibers and the formation of alloy nanoparticles took place, leading to the formation of a deep heterojunction through partial embedment of the nanoparticles. The formation of AuAg alloy also restricted the oxidation of Ag, thus making the nanoparticles highly stable in ambient condition. Accordingly, such unique AuAg-mTNF-H photocatalyst shows strong light absorption property covering the entire range of visible wavelengths with stability. The solar light harvesting property of AuAg-mTNF-H was verified by monitoring solar light induced H₂ evolution via water splitting and photodecomposition of MB. In both the cases AuAg-mTNF-H showed excellent H₂ evolution and photodecomposition of dye.

Recent Progress in Constructing Plasmonic Metal/Semiconductor Hetero-Nanostructures for Improved Photocatalysis

Hetero-nanomaterials constructed by plasmonic metals and functional semiconductors show enormous potential in photocatalytic applications, such as in hydrogen production, CO2 reduction, and treatment of pollutants. Their photocatalytic performances can be better regulated through adjusting structure, composition, and components’ arrangement. Therefore, the reasonable design and synthesis of metal/semiconductor hetero-nanostructures is of vital significance. In this mini-review, we laconically summarize the recent progress in efficiently establishing metal/semiconductor nanomaterials for improved photocatalysis. The defined photocatalysts mainly include traditional binary hybrids, ternary multi-metals/semiconductor, and metal/multi-semiconductors heterojunctions. The underlying physical mechanism for the enhanced photocatalysis of the established photocatalysts is highlighted. In the end, a brief summary and possible future perspectives for further development in this field are demonstrated.

Core-shell structured titanium dioxide nanomaterials for solar energy utilization

Because of its unmatched resource potential, solar energy utilization currently is one of the hottest research areas. Much effort has been devoted to developing advanced materials for converting solar energy into electricity, solar fuels, active chemicals, or heat. Among them, TiO2 nanomaterials have attracted much attention due to their unique properties such as low cost, nontoxicity, good stability and excellent optical and electrical properties. Great progress has been made, but research opportunities are still present for creating new nanostructured TiO2 materials. Core-shell structured nanomaterials are of great interest as they provide a platform to integrate multiple components into a functional system, showing improved or new physical and chemical properties, which are unavailable from the isolated components. Consequently, significant effort is underway to design, fabricate and evaluate core-shell structured TiO2 nanomaterials for solar energy utilization to overcome the remaining challenges, for example, insufficient light absorption and low quantum efficiency. This review strives to provide a comprehensive overview of major advances in the synthesis of core-shell structured TiO2 nanomaterials for solar energy utilization. This review starts from the general protocols to construct core-shell structured TiO2 nanomaterials, and then discusses their applications in photocatalysis, water splitting, photocatalytic CO2 reduction, solar cells and photothermal conversion. Finally, we conclude with an outlook section to offer some insights on the future directions and prospects of core-shell structured TiO2 nanomaterials and solar energy conversion.

Ordering of Hollow Ag-Au Nanospheres with Butterfly Wings as a Bio-template

A biological template strategy is implemented for the fabrication of hollow noble metal composite nanospheres within the ordered array nanostructures by introducing butterfly wings to some convenient technique procedure. Butterfly wings are activated by ethylenediamine to increase the reactive sites on the chitin component, on which Ag nanoparticles are in situ formed and serve as “seeds” to direct further incorporation during the following impregnation procedure. Butterfly wings could function as bio-substrate to provide an ordered array and regulate the synthesis process by providing active reaction sites (e.g. -CONH- and -OH). Thus, hollow Ag-Au nanospheres are loaded on the wings’ surface layer and inside the ordered array nanostructures homogeneously, which would have potential applications in surface enhanced Raman scattering (SERS).

Nanoarchitectures in dye-sensitized solar cells: metal oxides, oxide perovskites and carbon-based materials

Dye-sensitized solar cells (DSSCs) have aroused great interest and been regarded as a potential renewable energy resource among the third-generation solar cell technologies to fulfill the 21^st century global energy demand. DSSCs have notable advantages such as low cost, easy fabrication process and being eco-friendly in nature. The progress of DSSCs over the last 20 years has been nearly constant due to some limitations, like poor long-term stability, narrow absorption spectrum, charge carrier transportation and collection losses and poor charge transfer mechanism for regeneration of dye molecules. The main challenge for the scientific community is to improve the performance of DSSCs by using different approaches, like finding new electrode materials with suitable nanoarchitectures, dyes in composition with promising semiconductors and metal quantum dot fluorescent dyes, and cost-effective hole transporting materials (HTMs). This review focuses on DSSC photo-physics, which includes charge separation, effective transportation, collection and recombination processes. Different nanostructured materials, including metal oxides, oxide perovskites and carbon-based composites, have been studied for photoanodes, and counter electrodes, which are crucial to achieve DSSC devices with higher efficiency and better stability.

Mesoporous black TiO2-x/Ag nanospheres coupled with g-C3N4 nanosheets as 3D/2D ternary heterojunctions visible light photocatalysts

3D mesoporous black TiO_2-x/Ag nanosphere coupled with 2D g-C₃N₄ sheet ternary heterojunctions are successfully fabricated through a facile evaporation-induced self-assembly (EISA) process and photodeposition method, followed by a mild calcination (350°C) under an argon atmosphere after an in situ solid-state chemical reduction strategy. The resultant mesoporous black TiO_2-x/Ag/g-C₃N₄ ternary heterojunctions with narrow band gap of∼2.27eV possess a relative high specific surface area of∼100m²g^-1, main pore size of 6.2nm and the highest visible-light-driven photocatalytic property for degradation of methyl orange (97%) and methylene blue (99%). The apparent reaction rate constants (k) of mesoporous black TiO_2-x/Ag/g-C₃N₄ for methyl orange and methylene blue are∼9 and 11 times higher than that of pristine TiO₂. The possible mechanism is proposed, and the excellent photocatalytic property can be ascribed to the introduction of Ti³⁺ self-doping and g-C₃N₄, which favor the visible light absorption and the separation of electron-hole pairs, the surface plasma resonance effect of Ag nanoparticle, and the mesoporous networks offer more surface active sites.

A redox-controlled electrolyte for plasmonic enhanced dye-sensitized solar cells

Plasmonic enhanced dye-sensitized solar cells (DSSCs) with metallic nanostructures suffer from corrosion problems, especially with the presence of the iodine/triiodide redox couple in the electrolyte. Herein, we introduce an alternative approach by compensating the corrosion with a modified liquid electrolyte. In contrast to the existing method of surface preservation for plasmonic nanostructures, the redox-controlled electrolyte (RCE) contains iodoaurate intermediates, i.e. gold(i) diiodide (AuI₂^-) and gold(iii) tetraiodide (AuI₄^-) with optimal concentrations, such that these intermediates are readily reduced to gold nanoparticles during the operation of DSSCs. As corrosion and redeposition of gold occur simultaneously, it effectively provides corrosion compensation to the plasmonic gold nanostructures embedded in the photoanode. Cycling tests of the specific amount of gold contents in the RCE of DSSCs support the fact that the dissolution and deposition of gold are reversible and repeatable. This gold deposition on the TiO₂ photoanode results in forming a Schottky barrier (SB) at the metal-semiconductor interface and effectively inhibits the recombination of electron-hole pairs. Therefore, the RCE increases the short-circuit current, amplifies the open-circuit voltage, and reduces the impedance of the TiO₂/dye interface. The power conversion efficiency of DSSCs was improved by 57% after incorporating the RCE.

Lead-Sulfide-Selenide Quantum Dots and Gold-Copper Alloy Nanoparticles Augment the Light-Harvesting Ability of Solar Cells

Lead-sulfide-selenide (PbSSe) quantum dots (QDs) and gold-copper (AuCu) alloy nanoparticles (NPs) were incorporated into a cadmium sulfide (CdS)/titanium oxide (TiO₂ ) photoanode for the first time to achieve enhanced conversion of solar energy into electricity. PbSSe QDs with a band gap of 1.02 eV extend the light-harvesting range of the photoanode from the visible region to the near-infrared region. The conduction band (CB) edge of the PbSSe QDs is wedged between the CBs of TiO₂ and CdS; this additional level coupled with the good electrical conductivity of the dots facilitate charge transport and collection, and a high power conversion efficiency (PCE) of 4.44 % is achieved for the champion cell with the TiO₂ /PbSSe/CdS electrode. Upon including AuCu alloy NPs in the QD-sensitized electrodes, light absorption is enhance by plasmonic and light-scattering effects and also by the injection of hot electrons to the CBs of the QDs. Comparison of the incident photon-to-current conversion efficiency enhancement factors in addition to fluorescence decay and impedance studies reveal that the PbSSe QDs and AuCu alloy NPs promote charge injection to the current collector and increase the photogenerated charges produced, which thus enables the TiO₂ /PbSSe/CdS/AuCu cell to deliver the highest PCE of 5.26 % among all the various photoanode compositions used.

Fence Constructed at a Semiconductor/Electrolyte Interface Improving the Electron Collection Efficiency of the Photoelectrode for a Dye-Sensitized Solar Cell

Charge recombination and transfer at the TiO₂/dye/electrolyte interface play a crucial role in dye-sensitized solar cells (DSSCs). Here, a fine-controlled gold nanoparticle (Au NP) via electrodeposition incorporated into a porous TiO₂ photoanode and dodecanethiol molecules as an assembled monolayer capping on Au NPs was designed and prepared. The "fence-like" structure of gold thiol molecules at the TiO₂/dye/electrolyte interface can not only insulate the electrolyte to suppress recombination but also make full use of the plasmon-enhanced light absorption of Au NPs. The photoanodes were characterized by X-ray photoelectron spectroscopy, UV-vis absorption, and Mott-Schottky analyses. Compared to pure TiO₂, the DSSC with an interface "fence" structure achieved an efficiency (η) of 8.17%, increasing by 10.4%. The enhancement results are essentially attributed to the increase of the light-harvesting and electron collection properties, accompanying a slight promotion in the Fermi level. Furthermore, after dodecanethiol molecule treatment, the Au NPs with an intensified near-field effect also acted as electron sinks to store more electrons and exhibited a well electron-transport performance from electrochemical impedance spectroscopy analysis.

Enhanced visible-light-driven photocatalytic activity of Au@Ag core–shell bimetallic nanoparticles immobilized on electrospun TiO2 nanofibers for degradation of organic compounds

In this work, Au@Ag core–shell nanoparticles (NPs) with variable Ag shell thickness were synthesized and immobilized on TiO₂ nanofibers (TNF).

Fabrication of a silica/titania hollow nanorod and its electroresponsive activity

In this study, a 1D oriented hollow SiO₂/TiO₂ (HST) rod-like material was successfully fabricated via a sequential combination of sol–gel use, TiO₂ incorporation, and a sonication-mediated etching and redeposition method.

Fabrication of monodisperse nitrogen-doped carbon double-shell hollow nanoparticles for supercapacitors

A supercapacitor based on nitrogen-doped carbon double shell hollow nanoparticles as the electrode material exhibited a high specific capacitance of 202 F g⁻¹at a current density of 0.5 A g⁻¹due to high surface area and nitrogen-doping.

Titanium oxide morphology controls charge collection efficiency in quantum dot solar cells

Charge transfer at the TiO₂/quantum dot (QD) interface, charge collection at the TiO₂/QD/current collector (FTO or SnO₂:F) interface, and back electron transfer at the TiO₂/QDs/S²⁻ interface are processes controlled by the electron transport layer or TiO₂.

Plasmonic Solar Cells: From Rational Design to Mechanism Overview

Plasmonic effects have been proposed as a solution to overcome the limited light absorption in thin-film photovoltaic devices, and various types of plasmonic solar cells have been developed. This review provides a comprehensive overview of the state-of-the-art progress on the design and fabrication of plasmonic solar cells and their enhancement mechanism. The working principle is first addressed in terms of the combined effects of plasmon decay, scattering, near-field enhancement, and plasmonic energy transfer, including direct hot electron transfer and resonant energy transfer. Then, we summarize recent developments for various types of plasmonic solar cells based on silicon, dye-sensitized, organic photovoltaic, and other types of solar cells, including quantum dot and perovskite variants. We also address several issues regarding the limitations of plasmonic nanostructures, including their electrical, chemical, and physical stability, charge recombination, narrowband absorption, and high cost. Next, we propose a few potentially useful approaches that can improve the performance of plasmonic cells, such as the inclusion of graphene plasmonics, plasmon-upconversion coupling, and coupling between fluorescence resonance energy transfer and plasmon resonance energy transfer. This review is concluded with remarks on future prospects for plasmonic solar cell use.

A First-Principle Study of Synergized O2 Activation and CO Oxidation by Ag Nanoparticles on TiO2(101) Support

We performed density functional theory (DFT) calculations to investigate the synergized O2 activation and CO oxidation by Ag8 cluster on TiO2(101) support. The excellent catalytic activity of the interfacial Ag atoms in O2 dissociation is ascribed to the positive polarized charges, upshift of Ag d-band center, and assistance of surface Ti5c atoms. CO oxidation then takes place via a two-step mechanism coupled with O2 dissociation: (i) CO + O2 → CO2 + O and (ii) CO + O → CO2. The synergistic effect of CO and O2 activations reduces the oxidation energy barrier (Ea) of reaction (i), especially for the up-layered Ag atoms not in contact with support. It is found that the coadsorbed CO and O2 on the up-layered Ag atoms form a metal-stable four-center O-O-CO structure motif substantially promoting CO oxidation. On the oxygen defective Ag8/TiO2(101) surface, because of the decreased positive charges and the down-shift of d-band centers in Ag, the metal cluster exhibits low O2 adsorption and activation abilities. Although the dissociation of O2 is facilitated by the TiO2(101) defect sites, the dissociated O atoms would cover the defects so strongly that further CO oxidation would be prohibited unless much extra energy is introduced to recreate oxygen defects.

High Performance Dye-Sensitized Solar Cells with Enhanced Light-Harvesting Efficiency Based on Polyvinylpyrrolidone-Coated Au-TiO2 Microspheres

Surface plasmon resonance using noble metal nanoparticles is regarded as an attractive and viable strategy to improve the optical absorption and/or photocurrent in dye-sensitized solar cells (DSSCs). However, no significant improvement in device performance has been observed. The bottleneck is the stability of the noble-metal nanoparticles caused by chemical corrosion. Here, we propose a simple method to synthesize high-performance DSSCs based on polyvinylpyrrolidone-coated Au-TiO2 microspheres that utilize the merits of TiO2 microspheres and promote the coupling of surface plasmons with visible light. When 0.4 wt % Au nanoparticles were embedded into the TiO2 microspheres, the device achieved a power conversion efficiency (PCE) as high as 10.49%, a 7.9% increase compared with pure TiO2 microsphere-based devices. Simulation results theoretically confirmed that the improvement of the PCE is caused by the enhancement of the absorption cross-section of dye molecules and photocurrent.

Significant Broadband Photocurrent Enhancement by Au-CZTS Core-Shell Nanostructured Photocathodes

Copper zinc tin sulfide (CZTS) is a promising material for harvesting solar energy due to its abundance and non-toxicity. However, its poor performance hinders their wide application. In this paper gold (Au) nanoparticles are successfully incorporated into CZTS to form Au@CZTS core-shell nanostructures. The photocathode of Au@CZTS nanostructures exhibits enhanced optical absorption characteristics and improved incident photon-to-current efficiency (IPCE) performance. It is demonstrated that using this photocathode there is a significant increase of the power conversion efficiency (PCE) of a photoelectrochemical solar cell of 100% compared to using a CZTS without Au core. More importantly, the PCE of Au@CZTS photocathode improved by 15.8% compared to standard platinum (Pt) counter electrode. The increased efficiency is attributed to plasmon resonance energy transfer (PRET) between the Au nanoparticle core and the CZTS shell at wavelengths shorter than the localized surface plasmon resonance (LSPR) peak of the Au and the semiconductor bandgap.

Recent Development of Plasmonic Resonance-Based Photocatalysis and Photovoltaics for Solar Utilization

Increasing utilization of solar energy is an effective strategy to tackle our energy and energy-related environmental issues. Both solar photocatalysis (PC) and solar photovoltaics (PV) have high potential to develop technologies of many practical applications. Substantial research efforts are devoted to enhancing visible light activation of the photoelectrocatalytic reactions by various modifications of nanostructured semiconductors. This review paper emphasizes the recent advancement in material modifications by means of the promising localized surface plasmonic resonance (LSPR) mechanisms. The principles of LSPR and its effects on the photonic efficiency of PV and PC are discussed here. Many research findings reveal the promise of Au and Ag plasmonic nanoparticles (NPs). Continual investigation for increasing the stability of the plasmonic NPs will be fruitful.

Fabrication and photoactivity of short rod-shaped mesoporous SiO2@TiO2 composites with TiO2 shell

Short rod-shaped mesoporous SiO₂@TiO₂ composites containing TiO₂ shell were prepared using short rod-shaped mesoporous SiO₂–PGMA–PEGMA as template and TBT as titanium source.

Direct observation of electronic transition–plasmon coupling for enhanced electron injection in dye-sensitized solar cells

We illustrate experimental evidence of the effect of surface plasmon resonance (SPR) of a noble metal on the ultrafast-electron injection efficiencies of a sensitizing dye in proximity of a wide band gap semiconductor.

Broadband enhancement in absorption cross-section of N719 dye using different anisotropic shaped single crystalline silver nanoparticles

Schematic representing broadband enhancement in absorption cross-section of N719 dye using different anisotropic shaped single crystalline silver nanoparticles.

Hierarchical mesoporous silica nanoparticles as superb light scattering materials

A novel approach to enhance the light scattering effect was explored by applying hierarchical mesoporous silica nanoparticles with a radial wrinkle structure (WSNs) in DSSCs as scattering layers. The WSNs were evaluated as outstanding light scattering materials providing large surface area as well as multiple scattering.

Fabrication of Au(Ag)/AgCl/Fe3O4@PDA@Au nanocomposites with enhanced visible-light-driven photocatalytic activity

A novel Au(Ag)/AgCl/Fe₃O₄@Pdop@Au multifunctional nanotube was obtained, which showed obvious near-infrared absorption and exhibited excellent photocatalytic via visible light.

Panchromatic quasi-monolayer of Ag nanoparticles for high-efficiency dye-sensitized solar cells

We developed a panchromatic quasi-monolayer of Ag NPs and applied this technique to fabricate DSSCs.