Chelating agent-free, vapor-assisted crystallization method to synthesize hierarchical microporous/mesoporous MIL-125 (Ti)

In Situ Implanting ZrW2O7(OH)2(H2O)2 Nanorods into Hierarchical Functionalized Metal-Organic Framework via Solvent-Free Approach for Upgrading Catalytic Performance

Host-guest catalyst provides new opportunities for targeted applications and the development of new strategies for preparing host-guest catalysts is highly desired. Herein, an in situ solvent-free approach is developed for implanting ZrW2O7(OH)2(H2O)2 nanorods (ZrW-NR) in nitro-functionalized UiO-66(Zr) (UiO-66(Zr)-NO2) with hierarchical porosity, and the encapsulation of ZrW-NR enables the as-prepared host-guest catalyst remarkably enhanced catalytic performance for both for oxidative desulfurization (ODS) and acetalization reactions. ZrW-NR@UiO-66(Zr)-NO2 can eliminate 500 ppm sulfur within 9 min at 40 °C in ODS, and can transform 5.6 mmol benzaldehyde after 3 min at room temperature in acetalization reaction. Its turnover frequencies reach 72.3 h-1 at 40 °C for ODS which is 33.4 times higher than UiO-66(Zr)-NO2, and 28140 h-1 for acetalization which is the highest among previous reports. Density functional theory calculation result indicates that the W sites in ZrW-NR can decompose H2O2 to WVI-peroxo intermediates that contribute to catalytic activity for the ODS reaction. This work opens a new solvent-free approach for preparing MOFs-based host-guest catalysts to upgrade their redox and acid performance.

Insights into the sacrificial structure-activity relationship of a Ti-based metal-organic framework in an oxidative desulfurization reaction

Insights into the relationship between the crystal structure and activity of metal-organic frameworks (MOFs) are meaningful to investigate the potential properties of pristine MOFs for targeted catalytic reactions. Herein, we develop a high-efficiency method for boosting the oxidative desulfurization (ODS) activity of Ti-MOF in the presence of H+. The ODS activity of pristine Ti-MOF prepared via a solvothermal approach is very poor at a low reaction temperature but can be enhanced in the presence of H+. Ti-MOF in the presence of H+ shows ultrahigh ODS activity that can eliminate 1000 ppm sulfur after 7 min at 30 °C with no catalytic activity loss after recycling 11 times. The turnover frequency value reaches 12.4 h-1 at 30 °C, surpassing all the previously reported Ti-MOFs as ODS catalysts even at high temperatures. Characterization and quenching experimental results indicate that more uncoordinated Ti sites can be formed from slight damage to the structure of Ti-MOF during the catalytic reaction, and such exposed Ti sites can easily react with H+ and H2O2 to form Ti-hydroperoxo active species that determine the upgradation of ODS activity. This work provides a significant way to upgrade the catalytic activity of pristine Ti-MOFs for future application.

Intraparticle ripening to create hierarchically porous Ti-MOF single crystals for deep oxidative desulfurization

The catalytic oxidative desulfurization (ODS) technique is able to remove sulfur compounds from fuels, conducive to achieving deep desulfurization for the good of the ecological environment. Ti-based metal-organic frameworks (Ti-MOFs) possessing good affinity to organic reactants and considerable numbers of Ti active sites are promising catalysts for ODS. However, current Ti-MOFs suffer from severe diffusion limitations caused by the size mismatch between sole micropores and bulky sulfur compounds, leading to poor ODS performance. Here, a facile method of intraparticle ripening without any additive is developed to obtain hierarchically meso-microporous Ti-MIL-125 single crystals (Meso-Ti-MIL-125) for the first time. Such Meso-Ti-MIL-125 shows a BET surface area of 1401 m2 g-1 and a mesoporous volume that is 1.7 times as high as that of the conventional Ti-MIL-125. Our novel Meso-Ti-MIL-125 exhibits excellent catalytic performance in the ODS of a series of bulky thiophenic sulfur compounds, completely removing benzothiophene (BT), dibenzothiophene (DBT), and 4,6-dimethyldibenzothiophene (DMDBT) from model fuels, which is, respectively, 2.4 times, 1.5 times, and 6.7 times higher than the removal achieved with conventional Ti-MIL-125. Such a facile synthetic strategy is envisioned to be applied in many kinds of crystalline materials, such as zeolites, for industrial production.

Boosting Catalytic Performance of MOF-808(Zr) by Direct Generation of Rich Defective Zr Nodes via a Solvent-Free Approach

Creation of rich open metal sites (defect) on the nodes of metal-organic frameworks (MOFs) is an efficient approach to enhance their catalytic performance in heterogeneous reactions; however, direct generation of such defects remains challenging. In this contribution, we developed an in situ green route for rapid fabrication of defective MOF-808(Zr) with rich Zr-OH/OH₂ sites (occupying 25% Zr coordination sites) and hierarchical porosity without the assistance of formic acid and solvent. The optimal MOF-808(Zr) not only displayed superior activity in oxidative desulfurization (ODS) for removing 1000 ppm sulfur at ambient temperature within 20 min but also could convert 3.8 mmol of benzaldehyde to (dimethoxymethyl)benzene within 90 s at 30 °C. The turnover frequencies reached 45.4 h^-1 for ODS and 3451 h^-1 for acetalization, outperforming the most reported MOF-based catalysts. Theoretical calculation and experimental results show that the formed Zr-OH/OH₂ can react with H₂O₂ to generate peroxo-zirconium species, which readily oxidize the sulfur compound. Our work provides a new approach to the synthesis of defect-rich MOF-808(Zr) with the accessibility of active sites for target reactions.

Ti-MOF single-crystals featuring an intracrystal macro-microporous hierarchy for catalytic oxidative desulfurization

For the first time, we demonstrate a Ti-MOF (Ti-metal organic framework) single-crystal featuring an intracrystal macro-microporous hierarchy (Hier-NTU-9) by a vapor-assisted polymer-templated method. This Hier-NTU-9 possesses macropores (100-1000 nm) derived from polymer templates and enhanced transport ability of bulky molecules, exhibiting almost double the desulfurization activity compared to the conventional NTU-9.

Mechanistic Principles for Engineering Hierarchical Porous Metal-Organic Frameworks

Metal-organic frameworks (MOFs) have generated tremendous research interest in the past two decades, due to their high surface areas, tailorable active sites, and tunable structures. Hierarchical porous MOFs (HP-MOFs) with two or more pore systems are particularly attractive, benefiting from improved active site accessibility and enhanced mass diffusivity in applications involving bulk molecules. This review outlines the mechanistic principles used for the rational design of HP-MOFs, current techniques used to measure their hierarchical porosities, as well as their emerging applications. We then critically summarize the current challenges in this field and provide a contemporary perspective on the technological innovations that would address current synthetic challenges in the field of HP-MOFs. The aim of this review is to provide an in-depth understanding of the formation mechanisms, materials chemistry, and structural and chemical properties of HP-MOFs while exploring ways to enhance the performance of current MOF materials in a range of fields.

Zr-based metal organic framework nanoparticles coated with a molecularly imprinted polymer for trace diazinon surface enhanced Raman scattering analysis

In this study, a new surface imprinted polymer of type MOFs-MIPs was synthesized with diazinon as template and Zr-based metal organic framework (UiO-67) as matrix for trace diazinon surface enhanced...

Advances in Oxidative Desulfurization of Fuel Oils over MOFs-Based Heterogeneous Catalysts

Catalytic oxidative desulfurization (ODS) of fuel oils is considered one of the most promising non-hydrodesulfurization technologies due to the advantages of mild reaction conditions, low cost and easy removal of aromatic sulfur compounds. Based on this reason, the preparation of highly efficient ODS catalysts has been a hot research topic in this field. Recently, metal-organic frameworks (MOFs) have attracted extensive attention due to the advantages involving abundant metal centers, high surface area, rich porosity and varied pore structures. For this, the synthesis and catalytic performance of the ODS catalysts based on MOFs materials have been widely studied. Until now, many research achievements have been obtained along this direction. In this article, we will review the advances in oxidative desulfurization of fuel oils over MOFs-based heterogeneous catalysts. The catalytic ODS performance over various types of catalysts is compared and discussed. The perspectives for future work are proposed in this field.

Metal-Organic Framework-Based Hierarchically Porous Materials: Synthesis and Applications

Metal-organic frameworks (MOFs) have been widely recognized as one of the most fascinating classes of materials from science and engineering perspectives, benefiting from their high porosity and well-defined and tailored structures and components at the atomic level. Although their intrinsic micropores endow size-selective capability and high surface area, etc., the narrow pores limit their applications toward diffusion-control and large-size species involved processes. In recent years, the construction of hierarchically porous MOFs (HP-MOFs), MOF-based hierarchically porous composites, and MOF-based hierarchically porous derivatives has captured widespread interest to extend the applications of conventional MOF-based materials. In this Review, the recent advances in the design, synthesis, and functional applications of MOF-based hierarchically porous materials are summarized. Their structural characters toward various applications, including catalysis, gas storage and separation, air filtration, sewage treatment, sensing and energy storage, have been demonstrated with typical reports. The comparison of HP-MOFs with traditional porous materials (e.g., zeolite, porous silica, carbons, metal oxides, and polymers), subsisting challenges, as well as future directions in this research field, are also indicated.

Size modulation of MIL-125 nanocrystals to promote the catalytic performance towards oxidative desulfurization

The Ti-based metal-organic framework (Ti-MOF) MIL-125 with tunable crystalline size in the range of ca. 50 nm to 1500 nm was synthesized by the coordination modulation method using trans-cinnamic acid (CA) as a modulator. The coordination modulation also induced hierarchical porosity and structure defects on the nanocrystals. A significant size-dependent catalytic activity towards the oxidative desulfurization (ODS) reaction was observed for these MIL-125 nanocrystals. In particular, the MIL-125 nanocrystals with a mean size of ca. 50 nm exhibit dramatically enhanced catalytic performance for the bulky sulfur compound 4,6-dimethyldibenzothiophene (4,6-DMDBT) compared to the microcrystals. It is demonstrated that the size modulation of MIL-125 is an effective approach to promote its performance for the catalysis of bulky molecules.

Preparation and application of peptide molecularly imprinted material based on mesoporous metal-organic framework

In this study, a new molecularly imprinted material, MIP@UiO-66-NH₂, was synthesized with glutathione (GSH) as template and mesoporous metal organic framework (UiO-66-NH₂) as matrix. The molecularly imprinted polymer was modified on the surface and into the pores of the UiO-66-NH₂ by surface molecular imprinting method with thin polymer layer. Based on high specific surface area (1091.93 m² g^-1) and appropriate pore size (35 nm) of the ordered mesoporous UiO-66-NH₂, the adsorption capacity for GSH reached 94.43 mg g^-1, and the adsorption equilibrium could be achieved within 30 min. The adsorption isotherm data of MIP@UiO-66-NH₂ could be described well by Freundlich model and the kinetic data complied well with pseudo-second-order model. In addition, the MIP@UiO-66-NH₂ showed low adsorption capacity to GSH structural analogs (Q_L-cys = 6.51 mg g^-1), suggesting great selectivity for GSH recognition. Finally, the MIP@UiO-66-NH₂ was successfully applied for selective separation of GSH from BSA, skim milk and egg white tryptic digest.

Hierarchically porous metal-organic frameworks: synthesis strategies, structure(s), and emerging applications in decontamination

Metal-organic frameworks (MOFs) with high porosity have received much attention as promising materials for many applications owing to their unique properties. However, to date, most of the reported MOFs have microporous structures, which slow down diffusion/mass transfer and limit the accessibility of bulky molecules to its internal surface. Thus, it is crucial to develop an efficient way to create larger pores (mesoporous and/or macroporous) into microporous MOFs to form hierarchical porous metal-organic frameworks (HP-MOFs), which facilitate the diffusion and mass transfer of guest molecules. HP-MOFs are excellent and promising candidates for environmental applications under the background of environmental contaminations. In this review paper, we are primarily focusing on the latest progress in the preparation of HP-MOFs by employing template-assisted and template-free synthetic approaches for environmental cleaning applications. Particularly, the adsorptive purification of the most common toxic substances, including gases, dyes, heavy metal ions, and antibiotics from the environment using HP-MOFs as adsorbents is briefly discussed. The overall results clearly showed that the superiority of HP-MOFs compared with conventional microporous MOFs. Finally, we summarize the remaining challenges and provide personal perspectives on possible future development of HP-MOFs.

Titanium-Modified MIL-101(Cr) Derived Titanium-Chromium-Oxide as Highly Efficient Oxidative Desulfurization Catalyst

A titanium-chromium-oxide catalyst was prepared by a facile calcination of titanium-modified MIL-101(Cr). The resulting material, possessing a surface area of 60 m2 g−1 and a titania content of 50.0 wt%, can be directly used as the catalyst for oxidative desulfurization (ODS) reaction of dibenzothiophene (DBT). This novel ODS catalyst can remove 900 ppm sulfur-containing compounds in a reaction time of 30 min at 60 °C. The experimental results showed that the specific activity increased with the titanium content. The specific activity of the catalyst with 50%Ti reached 129 μmol/m2, which was much higher than that of reported Ti-based catalysts.

Shape-controlled synthesis of the metal–organic framework MIL-125 towards a highly enhanced catalytic performance for the oxidative desulfurization of 4,6-dimethyldibenzothiophene

Nanoscale MIL-125 crystals with truncated octahedral shape and dominantly exposed {101} facets were synthesized by the coordination modulation method, and they exhibit remarkably enhanced catalytic activity towards the oxidative desulfurization of 4,6-DMDBT.

Zr-Based Metal-Organic Frameworks with Intrinsic Peroxidase-Like Activity for Ultradeep Oxidative Desulfurization: Mechanism of H2O2 Decomposition

The restriction of sulfur content in fuels has become increasingly stringent as a result of the growing environmental concerns. Although several MOF-derived materials like POM@MOF composites have shown the ability to catalyze oxidative desulfurization (ODS), their catalytic activities inevitably obstructed by the encapsulated catalytic sites like POM due to the blockage of cavities. Therefore, MOFs with intrinsic and accessible catalytic sites are highly desirable for their applications in ultradeep ODS. Herein, four representative Zr-based MOFs (Zr-MOFs), namely, UiO-66, UiO-67, NU-1000, and MOF-808, were assessed for catalytic ODS. These MOFs were confirmed that they have peroxidase-like activity and can catalyze ODS with H₂O₂ as oxidant. Among them, MOF-808 showed the highest catalytic activity and it can fully desulfurize dibenzothiophene (DBT) in a model gasoline with a S concentration of 1000 ppm under 40 °C within 5 min. An extremely low apparent Arrhenius activation energy (22.0 KJ·mol^-1) and an extraordinarily high TOF value (42.7 h^-1) were obtained, ranking MOF-808 among the best catalysts for the catalytic DBT oxidation. Further studies confirmed that the excellent catalytic activity is mainly responsible for the high concentration of the accessible Zr-OH(H₂O) catalytic sites decorated in MOF-808. The superoxide radicals (^•O₂^-) and hydroxyl radicals (^•OH) were identified and were proved to involve in the DBT oxidation. Besides, the effects of Brönsted and lewis acidity to the catalytic efficiency were also discussed. Based on the experimental results, a plausible mechanism concerning on Zr-OH(H₂O) groups promoting the H₂O₂ decomposion in to both ^•O₂^- and ^•OH was first proposed. Moreover, MOF-808 can be facilely reused for at least eight runs without significant loss of its catalytic activity. By the integration of facile synthesis, high catalytic efficiency, and good stability, MOF-808 thus represents a new benchmark catalyst for catalytic oxidative desulfurization.

Dual-Purpose 3D Pillared Metal-Organic Framework with Excellent Properties for Catalysis of Oxidative Desulfurization and Energy Storage in Asymmetric Supercapacitor

This study proposes an approach for improving catalysis of oxidative desulfurization (ODS) of diesel fuel under mild reaction conditions and enhancing supercapacitor (SC) properties for storage of a high amount of charge. Our approach takes advantage of a novel dual-purpose cobalt(II)-based metal-organic framework (MOF), [Co(2-ATA)₂(4-bpdb)₄] _n (2-ATA: 2-aminoterephthalic acid and 4-bpdb: N, N-bis-pyridin-4-ylmethylene-hydrazine as the pillar spacer), which is called NH₂-TMU-53. Due to the stability of the used compound, we decided to evaluate the capability of this compound as a novel electrode material for storing energy in supercapacitors, and also to investigate its catalytic capabilities. It is demonstrated that the addition of H₂O₂ as an oxidant enhances the efficiency of sulfur removal, which indicates that NH₂-TMU-53 can efficiently catalyze the ODS reaction. According to the kinetics results, the catalyzed process follows pseudo-first-order kinetics and exhibits 15.57 kJ mol^-1 activation energy. Moreover, with respect to the radical scavenging evaluations, the process is governed by direct catalytic oxidation rather than indirect oxidative attack of radicals. Furthermore, NH₂-TMU-53 was applied as an electrode material for energy storage in SCs. This material is used in the three-electrode system and shows a specific capacitance of 325 F g^-1 at 5 A g^-1 current density. The asymmetric supercapacitor of NH₂-TMU-53//activated carbon evaluates the further electrochemical activity in real applications, delivers the high power density (2.31 kW kg^-1), high energy density (50.30 Wh kg^-1), and long cycle life after 6000 cycles (90.7%). Also, the asymmetric supercapacitor practical application was demonstrated by a glowing red light-emitting diode and driving a mini-rotating motor. These results demonstrate that the fabricated device presents a good capacity for energy storage without pyrolyzing the MOF structures. These findings can guide the development of high-performance SCs toward a new direction to improve their practical applications and motivate application of MOFs without pyrolysis or calcination.

Tailored 3D printed micro-crystallization chip for versatile and high-efficiency droplet evaporative crystallization

Droplet evaporative crystallization on a micro-structured platform with limited interfacial area has potential applications in crystallization theory, bioengineering, and particle drug preparation. Here, an efficient and versatile approach is discussed for multiple drop-evaporative crystallization processes on a micro-crystallization chip fabricated via three-dimensional printing. A chip with limited interfacial area could be fabricated on a highly controlled crystallizer interface. During liquid injection, various drop locations and evaporative conditions can be used, which enables flexible and distinct crystallization processes. This reveals controlling mechanisms and identifies nucleation locations and growth paths. Various classic crystallization systems were introduced to evaluate the chip performance. Controlled nucleation and growth mechanisms at stable evaporative rates were revealed. From the final crystal morphologies, particle locations, and distributions, the effects of the initial concentration and droplet contact conditions at the triple-phase interface could be investigated with high adjustability. Moreover, the results can provide insights into the 'coffee ring' formation during evaporative crystallization, dendritic crystal growth, and hydrate crystallization mechanisms. In the limited microstructure, the capillary flow of a liquid drop can spontaneously drive the crystal distribution and morphology. Finally, incorrect liquid drop locations that led to unpredictable crystal formation and distributions were discussed to improve repeatability and efficiency. Applications include the manufacture of particle drugs and flow chemistry.

Mesoporous Metal-Organic Frameworks: Synthetic Strategies and Emerging Applications

Metal-organic frameworks (MOFs) have attracted much attention over the past two decades due to their highly promising applications not only in the fields of gas storage, separation, catalysis, drug delivery, and sensors, but also in relatively new fields such as electric, magnetic, and optical materials resulting from their extremely high surface areas, open channels and large pore cavities compared with traditional porous materials like carbon and inorganic zeolites. Particularly, MOFs involving pores within the mesoscopic scale possess unique textural properties, leading to a series of research in the design and applications of mesoporous MOFs. Unlike previous Reviews, apart from focusing on recent advances in the synthetic routes, unique characteristics and applications of mesoporous MOFs, this Review also mentions the derivatives, composites, and hierarchical MOF-based systems that contain mesoporosity, and technical boundaries and challenges brought by the drawbacks of mesoporosity. Moreover, this Review subsequently reveals promising perspectives of how recently discovered approaches to different morphologies of MOFs (not necessarily entirely mesoporous) and their corresponding performances can be extended to minimize the shortcomings of mesoporosity, thus providing a wider and brighter scope of future research into mesoporous MOFs, but not just limited to the finite progress in the target substances alone.

BiOBr hybrids for organic pollutant removal by the combined treatments of adsorption and photocatalysis

The xSiO₂–BiOBr (x = 0–5) and SN–SiO₂–BiOBr hybrids were synthesized via a facile one step co-precipitation method. To determine the optimal formula, the photocatalytic degradation of C. I. reactive red 2 (X3B) with xSiO₂–BiOBr (x = 0–5) was investigated. Under simulated sunlight irradiation, 4SiO₂–BiOBr exhibited a better photocatalytic efficiency than other materials; 1.77 and 1.51 times higher than conventional nano TiO₂ and pure BiOBr, respectively. To demonstrate the photocatalytic degradation mechanism, the effect of active species on degradation of X3B was carried out, and a possible degradation pathway was proposed. To realize the combined treatments of adsorption and photocatalysis, an inorganic/organic (I/O) SN–SiO₂–BiOBr hybrid was further strategized and synthesized. It showed much better adsorption performance than the SiO₂–BiOBr composite. It could enrich organic pollutants by facile adsorption, and then degrade them to H₂O and CO₂ under natural sunlight irradiation. Notably, this sunlight-driven photocatalysis can be performed in the slurry resulted from the pollutant adsorption. As a result, the proposed combination of adsorption and photocatalysis will provide a novel strategy to greatly facilitate the treatment of organic wastewater.

The xSiO₂–BiOBr (x = 0–5) and SN–SiO₂–BiOBr hybrids were synthesized via a facile one step co-precipitation method.

Microwave-assisted dry-gel conversion-a new sustainable route for the rapid synthesis of metal–organic frameworks with solvent re-use

Microwave-assisted dry-gel conversion (MW-DGC) combines the advantages of concentrated reactants in DGC with fast heating by microwave irradiation.

Porous metal-organic framework Cu3(BTC)2 as catalyst used in air-cathode for high performance of microbial fuel cell

Metal-organic framework Cu₃(BTC)₂, prepared by an easy hydrothermal method, was used as the oxygen-based catalyst in microbial fuel cell (MFC). The maximum power density of Cu₃(BTC)₂ modified air-cathode MFC was 1772±15mWm^-2, almost 1.8 times higher than the control. BET results disclosed high specific surface area of 2159.7m²g^-1 and abundant micropores structure. Regular octahedron and porous surface of Cu₃(BTC)₂ were observed in SEM. XPS testified the existence of divalent copper in the extended 3D frameworks, which importantly acted as the Lewis-acid sites or redox centers in ORR. Additionally, the total resistance decreased by 42% from 17.60 to 10.24Ω compared with bare AC electrode. The rotating disk electrode test results showed a four-electron transfer pathway for Cu₃(BTC)₂, which was crucial for electrochemical catalytic activity. All the structural and electrochemical advantages make Cu₃(BTC)₂ a promising catalyst for ORR in MFC.

Fabrication of magnetically responsive HKUST-1/Fe3O4 composites by dry gel conversion for deep desulfurization and denitrogenation

Selective adsorption by use of metal-organic frameworks (MOFs) is an effective method for purification of hydrocarbon fuels. In consideration that the adsorption processes proceed in liquid phases, separation and recycling of adsorbents should be greatly facilitated if MOFs were endowed with magnetism. In the present study, we reported for the first time a dry gel conversion (DGC) strategy to fabricate magnetically responsive MOFs as adsorbents for deep desulfurization and denitrogenation. The solvent is separated from the solid materials in the DGC strategy, and vapor is generated at elevated temperatures to induce the growth of MOFs around magnetic Fe₃O₄ nanoparticles. This strategy can greatly simplify the complicated procedures of the well-known layer-by-layer method and avoid the blockage of pores confronted by introducing magnetic Fe₃O₄ nanoparticles to the pores of MOFs. Our results show that the adsorbents are capable of efficiently removing aromatic sulfur and nitrogen compounds from model fuels, for example removing 0.62mmolg^-1S and 0.89mmolg^-1N of thiophene and indole, respectively. In addition, the adsorbents are facile to separate from liquid phases by use of an external field. After 6 cycles, the adsorbents still show a good adsorption capacity that is comparable to the fresh one.

Environmentally benign dry-gel conversions of Zr-based UiO metal–organic frameworks with high yield and the possibility of solvent re-use

UiO-MOFs were synthesized using only 1/6 or upon solvent re-use only 1/30 of the DMF solvent volume compared to the solution synthesis on the same scale.

A titanium-based metal–organic framework as an ultralong cycle-life anode for PIBs

We achieved excellent anode performance for PIBs based on a metal–organic framework MIL-125(Ti) for the first time.

Surfactant-assisted synthesis of hierarchical NH2-MIL-125 for the removal of organic dyes

Hierarchical NH₂-MIL-125 were synthesized and an excellent dye removal performance was obtained.

Hierarchically porous materials: synthesis strategies and structure design

This review addresses recent advances in synthesis strategies of hierarchically porous materials and their structural design from micro-, meso- to macro-length scale.

An Efficient Synthesis Strategy for Metal-Organic Frameworks: Dry-Gel Synthesis of MOF-74 Framework with High Yield and Improved Performance

Vapor-assisted dry-gel synthesis of the metal-organic framework-74 (MOF-74) structure, specifically Ni-MOF-74 produced from synthetic precursors using an organic-water hybrid solvent system, showed a very high yield (>90% with respect to 2,5-dihydroxyterepthalic acid) and enhanced performance. The Ni-MOF-74 obtained showed improved sorption characteristics towards CO2 and the refrigerant fluorocarbon dichlorodifluoromethane. Unlike conventional synthesis, which takes 72 hours using the tetrahydrofuran-water system, this kinetic study showed that Ni-MOF-74 forms within 12 hours under dry-gel conditions with similar performance characteristics, and exhibits its best performance characteristics even after 24 hours of heating. In the dry-gel conversion method, the physical separation of the solvent and precursor mixture allows for recycling of the solvent. We demonstrated efficient solvent recycling (up to three times) that resulted in significant cost benefits. The scaled-up manufacturing cost of Ni-MOF-74 synthesized via our dry-gel method is 45% of conventional synthesis cost. Thus, for bulk production of the MOFs, the proposed vapor-assisted, dry-gel method is efficient, simple, and inexpensive when compared to the conventional synthesis method.