Immobilization of biomolecules on the surface of electrospun polycaprolactone fibrous scaffolds for tissue engineering

Surface modification of polycaprolactone nanofibers through hydrolysis and aminolysis: a comparative study on structural characteristics, mechanical properties, and cellular performance

Hydrolysis and aminolysis are two main commonly used chemical methods for surface modification of hydrophobic tissue engineering scaffolds. The type of chemical reagents along with the concentration and treatment time are main factors that determine the effects of these methods on biomaterials. In the present study, electrospun poly (ℇ-caprolactone) (PCL) nanofibers were modified through hydrolysis and aminolysis. The applied chemical solutions for hydrolysis and aminolysis were NaOH (0.5-2 M) and hexamethylenediamine/isopropanol (HMD/IPA, 0.5-2 M) correspondingly. Three distinct incubation time points were predetermined for the hydrolysis and aminolysis treatments. According to the scanning electron microscopy results, morphological changes emerged only in the higher concentrations of hydrolysis solution (1 M and 2 M) and prolonged treatment duration (6 and 12 h). In contrast, aminolysis treatments induced slight changes in the morphological features of the electrospun PCL nanofibers. Even though surface hydrophilicity of PCL nanofibers was noticeably improved through the both methods, the resultant influence of hydrolysis was comparatively more considerable. As a general trend, both hydrolysis and aminolysis resulted in a moderate decline in the mechanical performance of PCL samples. Energy dispersive spectroscopy analysis indicated elemental changes after the hydrolysis and aminolysis treatments. However, X-ray diffraction, thermogravimetric analysis, and infrared spectroscopy results did not show noticeable alterations subsequent to the treatments. The fibroblast cells were well spread and exhibited a spindle-like shape on the both treated groups. Furthermore, according to the 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay, the surface treatment procedures ameliorated proliferative properties of PCL nanofibers. These findings represented that the modified PCL nanofibrous samples by hydrolysis and aminolysis treatments can be considered as the potentially favorable candidates for tissue engineering applications.

In situ forming double-crosslinked hydrogels with highly dispersed short fibers for the treatment of irregular wounds

In situ forming injectable hydrogels hold great potential for the treatment of irregular wounds. However, their practical applications were hindered by long gelation time, poor mechanical performance, and a lack of a natural extracellular matrix structure. Herein, amino-modified electrospun poly(lactic-co-glycolic acid) (APLGA) short fibers with uniform distribution were introduced into gelatin methacrylate/oxidized dextran (GM/ODex) hydrogels. In comparison with the fiber aggregation structure in the PLGA fiber-incorporated hydrogels, the hydrogels with APLGA fibers possessed a uniform porous structure. The highly dispersed APLGA short fibers accelerated the sol-gel phase transition of the hydrogel due to the formation of dynamic Schiff-base bonds between the fibers and hydrogels. Furthermore, in combination with UV-assisted crosslinking, a rapid gelation time of 90 s was achieved for the double-crosslinked hydrogels. The addition of APLGA short fibers as fillers and the formation of the double-crosslinking network enhanced the mechanical performance of the hydrogels. Furthermore, the fiber-hydrogel composites exhibited favorable injectability, excellent biocompatibility, and improved cell infiltration. In vivo assessment indicated that the GM/ODex-APLGA hydrogels successfully filled the full-thickness defects and improved wound healing. This work demonstrates a promising solution for the treatment of irregular wounds.

Surface Functionalization of Nanofibers: The Multifaceted Approach for Advanced Biomedical Applications

Nanocarriers are gaining significant importance in the modern era of drug delivery. Nanofiber technology is one of the prime paradigms in nanotechnology for various biomedical and theranostic applications. Nanofibers obtained after successful electrospinning subjected to surface functionalized for drug delivery, biomedical, tissue engineering, biosensing, cell imaging and wound dressing application. Surface functionalization entirely changes physicochemical and biological properties of nanofibers. In physicochemical properties, wettability, melting point, glass transition temperature, and initial decomposition temperature significantly change offer several advantageous for nanofibers. Similarly, biological properties include cell adhesion, biocompatibility, and proliferation, also changes by functionalization of nanofibers. Various natural and synthetic materials polymers, metals, carbon materials, functional groups, proteins, and peptides, are currently used for surface modification of nanofibers. Various research studies across the globe demonstrated the usefulness of surface functionalized nanofibers in tissue engineering, wound healing, skin cancers, melanoma, and disease diagnosis. The delivery of drug through surface functionalized nanofibers results in improved permeation and bioavailability of drug which is important for better targeting of disease and therapeutic efficacy. This review provides a comprehensive insight about various techniques of surface functionalization of nanofibers along with its biomedical applications, toxicity assessment and global patent scenario.

Immobilization of Gelatin on Fibers for Tissue Engineering Applications: A Comparative Study of Three Aliphatic Polyesters

Immobilization of cell adhesive proteins on the scaffold surface has become a widely reported method that can improve the interaction between scaffold and cells. In this study, three nanofibrous scaffolds obtained by electrospinning of poly(caprolactone) (PCL), poly(L-lactide-co-caprolactone) (PLCL) 70:30, or poly(L-lactide) (PLLA) were subjected to chemical immobilization of gelatin based on aminolysis and glutaraldehyde cross-linking, as well as physisorption of gelatin. Two sets of aminolysis conditions were applied to evaluate the impact of amine group content. Based on the results of the colorimetric bicinchoninic acid (BCA) assay, it was shown that the concentration of gelatin on the surface is higher for the chemical modification and increases with the concentration of free NH2 groups. XPS (X-ray photoelectron spectroscopy) analysis confirmed this outcome. On the basis of XPS results, the thickness of the gelatin layer was estimated to be less than 10 nm. Initially, hydrophobic scaffolds are completely wettable after coating with gelatin, and the time of waterdrop absorption was correlated with the surface concentration of gelatin. In the case of all physically and mildly chemically modified samples, the decrease in stress and strain at break was relatively low, contrary to strongly aminolyzed PLCL and PLLA samples. Incubation testing performed on the PCL samples showed that a chemically immobilized gelatin layer is more stable than a physisorbed one; however, even after 90 days, more than 60% of the initial gelatin concentration was still present on the surface of physically modified samples. Mouse fibroblast L929 cell culture on modified samples indicates a positive effect of both physical and chemical modification on cell morphology. In the case of PCL and PLCL, the best morphology, characterized by stretched filopodia, was observed after stronger chemical modification, while for PLLA, there was no significant difference between modified samples. Results of metabolic activity indicate the better effect of chemical immobilization than of physisorption of gelatin.

Electrospun Chitosan Functionalized with C12, C14 or C16 Tails for Blood-Contacting Medical Devices

Medical applications stimulate the need for materials with broad potential. Chitosan, the partially deacetylated derivative of chitin, offers many interesting characteristics, such as biocompatibility and chemical derivatization possibility. In the present study, porous scaffolds composed of electrospun interwoven nanometric fibers are produced using chitosan or chitosan functionalized with aliphatic chains of twelve, fourteen or sixteen methylene groups. The scaffolds were thoroughly characterized by SEM and XPS. The length of the aliphatic tail influenced the physico-chemical and dynamic mechanical properties of the functionalized chitosan. The electrospun membranes revealed no interaction of Gram+ or Gram− bacteria, resulting in neither antibacterial nor bactericidal, but constitutively sterile. The electrospun scaffolds demonstrated the absence of cytotoxicity, inflammation response, and eryptosis. These results open the door to their application for blood purification devices, hemodialysis membranes, and vascular grafts.

The Use of Fibers in Bone Tissue Engineering

Bone tissue engineering aims to restore and maintain the function of bone by means of biomaterial-based scaffolds. This review specifically focuses on the use of fibers in biomaterials used for bone tissue engineering as suitable environment for bone tissue repair and regeneration. We present a bioinspired rationale behind the use of fibers in bone tissue engineering and provide an overview of the most common fiber fabrication methods, including solution, melt, and microfluidic spinning. Subsequently, we provide a brief overview of the composition of fibers that are used in bone tissue engineering, including fibers composed of (i) natural polymers (e.g., cellulose, collagen, gelatin, alginate, chitosan, and silk, (ii) synthetic polymers (e.g., polylactic acid [PLA], polycaprolactone, polyglycolic acid [PGA], polyethylene glycol, and polymer blends of PLA and PGA), (iii) ceramic fibers (e.g., aluminium oxide, titanium oxide, and zinc oxide), (iv) metallic fibers (e.g., titanium and its alloys, copper and magnesium), and (v) composite fibers. In addition, we review the most relevant fiber modification strategies that are used to enhance the (bio)functionality of these fibers. Finally, we provide an overview of the applicability of fibers in biomaterials for bone tissue engineering, with a specific focus on mechanical, pharmaceutical, and biological properties of fiber-functionalized biomaterials for bone tissue engineering. Impact statement Natural bone is a complex composite material composed of an extracellular matrix of mineralized fibers containing living cells and bioactive molecules. Consequently, the use of fibers in biomaterial-based scaffolds offers a wide variety of opportunities to replicate the functional performance of bone. This review provides an overview of the use of fibers in biomaterials for bone tissue engineering, thereby contributing to the design of novel fiber-functionalized bone-substituting biomaterials of improved functionality regarding their mechanical, pharmaceutical, and biological properties.

A "Bridge-Building" Glycan Scaffold Mimicking Microbial Invasion for In Situ Endothelialization

The globally high prevalence of peripheral artery diseases poses a pressing need for biomaterials grafts to rebuild vasculature. When implanted, they should promote endothelial cells (ECs) adhesion both profoundly and selectively-but the latter expectation remains unfulfilled. Here, this work is inspired by fungi that invade blood vessels via the "bridge" of galectins that, secreted by ECs, can simultaneously bind carbohydrates on fungal surface and integrin receptors on ECs. A glucomannan decanoate (GMDE) substrate mimicking fungal carbohydrates that highly and preferentially supports ECs adhesion while rejecting several other cell types is designed. Electrospun GMDE scaffolds efficiently sequester endogenous galectin-1-which bridges ECs to the scaffolds as it functions in fungal invasions-and promote blood perfusion in a murine limb ischemic model. Meanwhile, the application of GMDE requires no exogenous pro-angiogenic agents and causes no organ toxicity or adverse inflammation in mice, highlighting its high safety of potential translation. This glycan material, uniquely mimicking a microbial action and harnessing a secreted protein as a "bridge," represents an effective, safe, and different strategy for ischemic vascular therapy.

The Marine Polysaccharide Ulvan Confers Potent Osteoinductive Capacity to PCL-Based Scaffolds for Bone Tissue Engineering Applications

Hybrid composites of synthetic and natural polymers represent materials of choice for bone tissue engineering. Ulvan, a biologically active marine sulfated polysaccharide, is attracting great interest in the development of novel biomedical scaffolds due to recent reports on its osteoinductive properties. Herein, a series of hybrid polycaprolactone scaffolds containing ulvan either alone or in blends with κ-carrageenan and chondroitin sulfate was prepared and characterized. The impact of the preparation methodology and the polysaccharide composition on their morphology, as well as on their mechanical, thermal, water uptake and porosity properties was determined, while their osteoinductive potential was investigated through the evaluation of cell adhesion, viability, and osteogenic differentiation of seeded human adipose-derived mesenchymal stem cells. The results verified the osteoinductive ability of ulvan, showing that its incorporation into the polycaprolactone matrix efficiently promoted cell attachment and viability, thus confirming its potential in the development of biomedical scaffolds for bone tissue regeneration applications.

Effect of surface chemistry-modified polycaprolactone scaffolds on osteogenic differentiation of stem cells from human exfoliated deciduous teeth

The aim of this study was to investigate the effect of surface modification of a polycaprolactone scaffold on promoting osteogenic differentiation of stem cells from human exfoliated deciduous teeth. Four different polycaprolactone scaffold were evaluated: untreated; coated with hyaluronic acid; coated with gelatin; and coated with hyaluronic acid and then with gelatin. The resulting scaffolds were characterized using scanning electron microscopy and attenuated total reflectance-Fourier transform infrared spectroscopy (ATR-FTIR). Human stem cells were cultured on the modified scaffolds placed in osteogenic differentiation medium. During culture, the osteogenic potential of the stem cells was examined by evaluating alkaline phosphatase activity and staining intensity, expression of osteoblastic-specific genes, and matrix mineralization. Scanning electron microscopy and ATR-FTIR confirmed productive biomacromolecular surface treatment of the polycaprolactone scaffold. All scaffolds permitted differentiation of stem cells into osteoblastic cells, but the gelatin-coated polycaprolactone scaffold facilitated osteogenesis of a larger number of stem cells than the untreated and the hyaluronic acid-coated scaffolds. We demonstrate that gelatin is an appropriate macromolecule for modifying the surface of an electrospun polycaprolactone fibre scaffold that is used subsequently in bone tissue engineering applications.

Effect of surface modification on physical and cellular properties of PCL thin film

Lack of suitable surface functional groups is one of the main limitations related to the cell attachment of Polycaprolactone (PCL). The aim of this research was to surface modify the PCL film using gelatin coating, via a simple physical entrapment process. In this regard, after preparation of PCL films using casting, they were immersed in each gelatin solutions. Consequently, chemical crosslinking using glutaraldehyde was performed to improve the stability of the PCL-gelatin film. Attenuated total reflectance-Fourier transform infrared spectroscopy (ATR-FTIR), Scanning electron microscope (SEM), contact angle measurement, strip tensile test, Dimethylthiazol-diphenyltetrazolium bromide (MTT) assay and Cell seeding were used to evaluate the quality of the coating layer, the thickness of PCL-gelatin film, the surface wettability, their mechanical properties, Cell viability and Cell attachment and proliferation respectively. Results showed that the amount of entrapped gelatin enhanced with increasing acetone in the gelatin solution. Surface modification led to a two-fold increment of mechanical strength, about 50% increase in elastic modulus, 54% in elongation and up to 11% increment in cell viability. Moreover, wettability and cell attachment of PCL film significantly enhanced, after gelatin modification. In conclusion, the simple and cost effective modification of PCL using gelatin entrapment could provide significant mechanical and biological properties making it a promising approach for development of three-dimensional scaffolds for bone tissue engineering.

Fibronectin-Functionalized Fibrous Meshes as a Substrate to Support Cultures of Thymic Epithelial Cells

Thymic epithelial cells (TECs) are the main regulators of T lymphocyte development and selection, requiring a three-dimensional (3D) environment to properly perform these biological functions. The aim of this work was to develop a 3D culture substrate that allows the survival and proliferation of TECs. Thus, electrospun fibrous meshes (eFMs) were functionalized with fibronectin, one of the major extracellular matrix (ECM) proteins of the thymus. For that, highly porous eFMs were activated using oxygen plasma treatment followed by amine insertion, which allows the immobilization of fibronectin through EDC/NHS chemistry. The medullary TECs presented increased proliferation, viability, and protein synthesis when cultured on fibronectin-functionalized eFMs (FN-eFMs). These cells showed a spread morphology, with increased migration toward the inner layers of FN-eFMs and the production of thymic ECM proteins, such as collagen type IV and laminin. These results suggest that FN-eFMs are an effective substrate for supporting thymic cell cultures.

Application of blocking and immobilization of electrospun fiber in the biomedical field

The fiber obtained by electrospinning technology is a kind of biomaterial with excellent properties, which not only has a unique micro-nanostructure that gives it a large specific surface area and porosity, but also has satisfactory biocompatibility and degradability (if the spinning material used is a degradable polymer). These biomaterials provide a suitable place for cell attachment and proliferation, and can also achieve immobilization. On the other hand, its large porosity and three-dimensional spatial structure show unique blocking properties in drug delivery applications in order to achieve the purpose of slow release or even controlled release. The immobilization effect or blocking effect of these materials is mainly reflected in the hollow or core-shell structure. The purpose of this paper is to understand the application of the electrospun fiber based on biodegradable polymers (aliphatic polyesters) in the biomedical field, especially the immobilization or blocking effect of the electrospun fiber membrane on cells, drugs or enzymes. This paper focuses on the performance of these materials in tissue engineering, wound dressing, drug delivery system, and enzyme immobilization technology. Finally, based on the existing research basis of the electrospun fiber in the biomedical field, a potential research direction in the future is put forward, and few suggestions are also given for the technical problems that urgently need to be solved.

Interactions at engineered graft-tissue interfaces: A review

The interactions at the graft-tissue interfaces are critical for the results of engraftments post-implantation. To improve the success rate of the implantations, as well as the quality of the patients' life, understanding the possible reactions between artificial materials and the host tissues is helpful in designing new generations of material-based grafts aiming at inducing specific responses from surrounding tissues for their own reparation and regeneration. To help researchers understand the complicated interactions that occur after implantations and to promote the development of better-designed grafts with improved biocompatibility and patient responses, in this review, the topics will be discussed from the basic reactions that occur chronologically at the graft-tissue interfaces after implantations to the existing and potential applications of the mechanisms of such reactions in designing of grafts. It offers a chance to bring up-to-date advances in the field and new strategies of controlling the graft-tissue interfaces.

Electrophoretic deposition of chitosan/nano silver embedded micro sphere on centrifugal spun fibrous matrices - A facile biofilm resistant biocompatible material

Micro fibrous polycaprolactone (PCL) mat generally used for biomedical application was produced by facile centrifugal spinning system (C-Spin). The produced mat exhibited good structural integrity and good flexibility. The developed mat was used as substrate for electrophoretic deposition (EPD) of chitosan and polyethylene glycol (PEG) along with silver nano particles (AgNPs). During the EPD process, polymeric micro spheres embedded with silver nano particles were formed and deposited on the C-Spun substrates and the size of AgNPs were found to be around 15 nm. Surface topography of all coated samples were analyzed and found that the deposition was neat and uniform. Swelling behavior of the coated substrates were studied and found that CS/HMP/AgNPs coated substrates showed 274% swelling compared to their own dry weight. Release profile of silver nanoparticles confirmed that initial burst release followed by sustained release for CS/HMP/AgNPs coated substrates and this might be attributed to the hydrophilicity and high swellability of HMP. All AgNPs coated samples were completely prevent the bacterial biofilm formation and CS/HMP/AgNPs showed better reduction in bacterial growth on matured biofilm model. Cell proliferation studies confirmed that CS/HMP/AgNPs is biocompatible and can be used as a wound dressing material.

UV cross-linked polyvinylpyrrolidone electrospun fibres as antibacterial surfaces

Many bacteria become progressively more resistant to antibiotics and it remains a challenging task to control their overall levels. Polymers combined with active biomolecules come to the forefront for the design of antibacterial materials that can address this encounter. In this work, we investigated the photo-crosslinking approach of UV-sensitive benzophenone molecule (BP) with polyvinylpyrrolidone (PVP) polymer within electrospun fibres. The BP and PVP solutions allowed fabricating polymer mats that were subsequently functionalised with antibacterial lysozyme. The physical properties of the crosslinked electrospun fibres were investigated by scanning electron microscopy and atomic force microscopy. The average diameter of the obtained fibres decreased from 290 ± 50 nm to 270 ± 70 nm upon the addition of the crosslinking molecules and then to 240 ± 80 nm and 180 ± 90 nm after subsequent crosslinking reaction at an increasing time: 3 and 5 h, respectively. The peak force quantitative nanomechanical mapping (PF-QNM) indicated the increase of DMT modulus of obtained cross-linked fibres from 4.1 ± 0.8 GPa to 7.2 ± 0.5 GPa. Furthermore, the successful crosslinking reaction of PVP and BP solution into hydrogels was investigated in terms of examining photo-crosslinking mechanism and was confirmed by rheology, Raman, Fourier transform infrared and nuclear magnetic resonance. Finally, lysozyme was successfully encapsulated within cross-linked PVP-BP hydrogels and these were successfully electrospun into mats which were found to be as effective antibacterial agents as pure lysozyme molecules. The dissolution rate of photo cross-linked PVP mats was observed to increase in comparison to pure PVP electrospun mats which opened a potential route for their use as antibacterial, on-demand, dissolvable coatings for various biomedical applications.

Cell Responses to Electrical Pulse Stimulation for Anticancer Drug Release

Electrical stimulation is an attractive approach to tune on-demand drug release in the body as it relies on simple setups and requires typically 1 V or less. Although many studies have been focused on the development of potential smart materials for electrically controlled drug release, as well as on the exploration of different delivery mechanisms, progress in the field is slow because the response of cells exposed to external electrical stimulus is frequently omitted from such investigations. In this work, we monitor the behavior of prostate and breast cancer cells (PC-3 and MCF7, respectively) exposed to electroactive platforms loaded with curcumin, a hydrophobic anticancer drug. These consist in conducting polymer nanoparticles, which release drug molecules by altering their interactions with polymer, and electrospun polyester microfibres that contain electroactive nanoparticles able to alter the porosity of the matrix through an electro-mechanical actuation mechanism. The response of the cells against different operating conditions has been examined considering their viability, metabolism, spreading and shape. Results have allowed us to differentiate the damage induced in the cell by the electrical stimulation from other effects, as for example, the anticancer activity of curcumin and/or the presence of curcumin-loaded nanoparticles or fibres, demonstrating that these kinds of platforms can be effective when the dosage of the drug occurs under restricted conditions.

Co-culture cell-derived extracellular matrix loaded electrospun microfibrous scaffolds for bone tissue engineering

Cell-derived extracellular matrix (ECM) has been employed as scaffolds for tissue engineering, creating a biomimetic microenvironment that provides physical, chemical and mechanical cues for cells and supports cell adhesion, proliferation, migration and differentiation by mimicking their in vivo microenvironment. Despite the enhanced bioactivity of cell-derived ECM, its application as a scaffold to regenerate hard tissues such as bone is still hampered by its insufficient mechanical properties. The combination of cell-derived ECM with synthetic biomaterials might result in an effective strategy to enhance scaffold mechanical properties and structural support. Electrospinning has been used in bone tissue engineering to fabricate fibrous and porous scaffolds, mimicking the hierarchical organized fibrillar structure and architecture found in the ECM. Although the structure of the scaffold might be similar to ECM architecture, most of these electrospun scaffolds have failed to achieve functionality due to a lack of bioactivity and osteoinductive factors. In this study, we developed bioactive cell-derived ECM electrospun polycaprolactone (PCL) scaffolds produced from ECM derived from human mesenchymal stem/stromal cells (MSC), human umbilical vein endothelial cells (HUVEC) and their combination based on the hypothesis that the cell-derived ECM incorporated into the PCL fibers would enhance the biofunctionality of the scaffold. The aims of this study were to fabricate and characterize cell-derived ECM electrospun PCL scaffolds and assess their ability to enhance osteogenic differentiation of MSCs, envisaging bone tissue engineering applications. Our findings demonstrate that all cell-derived ECM electrospun scaffolds promoted significant cell proliferation compared to PCL alone, while presenting similar physical/mechanical properties. Additionally, MSC:HUVEC-ECM electrospun scaffolds significantly enhanced osteogenic differentiation of MSCs as verified by increased ALP activity and osteogenic gene expression levels. To our knowledge, these results describe the first study suggesting that MSC:HUVEC-ECM might be developed as a biomimetic electrospun scaffold for bone tissue engineering applications.

Fabrication of polycaprolactone tubular scaffolds with an orthogonal-bilayer structure for smooth muscle cells

In this study, we used electrospinning to prepare a bilayered polycaprolactone (PCL) tubular graft consisting of an internal layer comprising axial nanofibers and an external layer comprising circumferentially aligned nanofibers. Subsequently, the surfaces of the electrospun PCL tubular scaffolds were modified with 1,6-diaminohexane to introduce amino groups and were then chemically conjugated with gelatin (Gel). The amino groups and Gel were successfully immobilized on the PCL scaffolds according to a ninhydrin assay, attenuated total reflectance Fourier transform infrared (ATR-FTIR) spectroscopic analysis and contact angle analysis. Additionally, vascular smooth muscle cells (vSMCs, A7r5) were cultured on random and aligned Gel-PCL scaffolds to evaluate the effects of fiber orientation on cell behavior. The results of immunofluorescence analysis showed that vSMCs on the aligned Gel-PCL scaffolds exhibited a pro-contractile phenotype.

Electrospun Polycaprolactone Fibrous Membranes Containing Ag, TiO₂ and Na₂Ti₆O13 Particles for Potential Use in Bone Regeneration

Biocompatible and biodegradable membrane treatments for regeneration of bone are nowadays a promising solution in the medical field. Bioresorbable polymers are extensively used in membrane elaboration, where polycaprolactone (PCL) is used as base polymer. The goal of this work was to improve electrospun membranes’ biocompatibility and antibacterial properties by adding micro- and nanoparticles such as Ag, TiO₂ and Na₂Ti₆O₁₃. Micro/nanofiber morphologies of the obtained membranes were characterized by X-ray diffraction, Fourier-transform infrared spectroscopy, differential scanning calorimetry, scanning electron microscopy, energy-dispersive X-ray spectroscopy and a tensile test. Also, for this study optical microscopy was used to observe DAPI-stained cells. Membranes of the different systems were electrospun to an average diameter of 1.02–1.76 μm. To evaluate the biological properties, cell viability was studied by growing NIH/3T3 cells on the microfibers. PCL/TiO₂ strength was enhanced from 0.6 MPa to 6.3 MPa in comparison with PCL without particles. Antibacterial activity was observed in PCL/TiO₂ and PCL/Na₂Ti₆O₁₃ electrospun membranes using Staphylococcus aureus bacteria. Bioactivity of the membranes was confirmed with simulated body fluid (SBF) treatment. From this study, the ceramic particles TiO₂ and Na₂Ti₆O₁₃, combined with a PCL matrix with micro/nanoparticles, enhanced cell proliferation, adhesion and antibacterial properties. The electrospun composite with Na₂Ti₆O₁₃ can be considered viable for tissue regenerative processes.

Stability of lysozyme incorporated into electrospun fibrous mats for wound healing

In this study, we investigated the feasibility of incorporating protein drugs into electrospun fibrous mats (EFMs) for wound healing using lysozyme as a model drug. Lysozyme nanoparticles (Lyso- NPs) were first obtained by electrospray. Lysozyme solutions were prepared with a binary solvent mixture of ethanol (EtOH)-water (H₂O) at varied volume ratios. Subsequently, Lyso-NPs were suspended in poly(lactic-co-glycolic acid) (PLGA) solutions using trifluoroethanol (TFE) as a solvent. Lyso-NPs loaded EFMs were obtained by electrospinning of the aforementioned suspensions, and the bioactivity of lysozyme in the EFMs was investigated using fluorescence-based assay kit. The electrosprayed Lyso-NPs were spherical with barely altered bioactivity as compared to the untreated raw material when using EtOH- H₂O (30:70, v/v) as the solvent. After the subsequent electrospinning process, more than 90% of the bioactivity of lysozyme was retained compared to the raw material. The cytotoxicity of the produced EFMs was evaluated by thiazolyl blue tetrazolium bromide (MTT) study and the proliferation and distribution of mouse fibroblast cells (L929) growing on EFMs were investigated using 4,6-diamidino-2-phenylindol dihydrochloride (DAPI) for nucleic acid staining. Nearly negligible cytotoxicity of all the EFMs was observed according to the MTT study. Furthermore, it was observed that the L929 cells grew well on the Lyso-EFMs, especially those with the modification of polyethylene glycol (PEG) that was added to improve the hydrophilicity of EFMs. This study demonstrated that the electrospray/electrospinning processes are suitable for loading biomacromolecules to produce functionalized wound dressings to promote wound healing.

Silk fibroin/chitosan thin film promotes osteogenic and adipogenic differentiation of rat bone marrow-derived mesenchymal stem cells

As a biodegradable polymer thin film, silk fibroin/chitosan composite film overcomes the defects of pure silk fibroin and chitosan films, respectively, and shows remarkable biocompatibility, appropriate hydrophilicity and mechanical properties. Silk fibroin/chitosan thin film can be used not only as metal implant coating for bone injury repair, but also as tissue engineering scaffold for skin, cornea, adipose, and other soft tissue injury repair. However, the biocompatibility of silk fibroin/chitosan thin film for mesenchymal stem cells, a kind of important seed cell of tissue engineering and regenerative medicine, is rarely reported. In this study, silk fibroin/chitosan film was prepared by solvent casting method, and the rat bone marrow-derived mesenchymal stem cells were cultured on the silk fibroin/chitosan thin film. Osteogenic and adipogenic differentiation of rat bone marrow-derived mesenchymal stem cells were induced, respectively. The proliferation ability, osteogenic and adipogenic differentiation abilities of rat bone marrow-derived mesenchymal stem cells were systematically compared between silk fibroin/chitosan thin film and polystyrene tissue culture plates. The results showed that silk fibroin/chitosan thin film not only provided a comparable environment for the growth and proliferation of rat bone marrow-derived mesenchymal stem cells but also promoted their osteogenic and adipogenic differentiation. This work provided information of rat bone marrow-derived mesenchymal stem cells behavior on silk fibroin/chitosan thin film and extended the application of silk fibroin/chitosan thin film. Based on the results, we suggested that the silk fibroin/chitosan thin film could be a promising material for tissue engineering of bone, cartilage, adipose, and skin.

Axon mimicking hydrophilic hollow polycaprolactone microfibres for diffusion magnetic resonance imaging

Highly hydrophilic hollow polycaprolactone (PCL) microfibres were developed as building elements to create tissue-mimicking test objects (phantoms) for validation of diffusion magnetic resonance imaging (MRI). These microfibres were fabricated by the co-electrospinning of PCL-polysiloxane-based surfactant (PSi) mixture as shell and polyethylene oxide as core. The addition of PSi had a significant effect on the size of resultant electrospun fibres and the formation of hollow microfibres. The presence of PSi in both co-electrospun PCL microfibre surface and cross-section, revealed by X-ray energy dispersive spectroscopy (EDX), enabled water to wet these fibres completely (i.e., zero contact angle) and remained active for up to 12 months after immersing in water. PCL and PCL-PSi fibres with uniaxial orientation were constructed into water-filled phantoms. MR measurement revealed that water molecules diffuse anisotropically in the PCL-PSi phantom. Co-electrospun hollow PCL-PSi microfibres have desirable hydrophilic properties for the construction of a new generation of tissue-mimicking dMRI phantoms.

Polycaprolactone nanofibers functionalized with placental derived extracellular matrix for stimulating wound healing activity

Impaired wound healing is primarily associated with inadequate angiogenesis, repressed cell migration, deficient synthesis of extracellular matrix (ECM) component/growth factors, and altered inflammatory responses in the wound bed environment.

Improvement in aluminum complexes bearing a Schiff base in ring-opening polymerization of ε-caprolactone: the synergy of the N,S-Schiff base in a five-membered ring aluminum system

A series of five-membered ring aluminum complexes bearing thiol-Schiff base ligands were synthesized, and their application in the ring-opening polymerization of ε-caprolactone (CL) was investigated.

Hybrid PCL/CaCO3 scaffolds with capabilities of carrying biologically active molecules: Synthesis, loading and in vivo applications

Designing advanced biomaterials for tissue regeneration with drug delivery and release functionalities remains a challenge in regenerative medicine. In this research, we have developed novel composite scaffolds based on polymeric polycaprolactone fibers coated with porous calcium carbonate structures (PCL/CaCO₃) for tissue engineering and have shown their drug delivery and release in rats. In vivo biocompatibility tests of PCL/CaCO₃ scaffolds were complemented with in vivo drug release study, where tannic acid (TA) was used as a model drug. Release of TA from the scaffolds was realized by recrystallization of the porous vaterite phase of calcium carbonate into the crystalline calcite. Cell colonization and tissue vascularization as well as transplantability of developed PCL/CaCO₃+TA scaffolds were observed. Detailed study of scaffold transformations during 21-day implantation period was followed by scanning electron microscopy and X-ray diffraction studies before and after in vivo implantation. The presented results demonstrate that PCL/CaCO₃ scaffolds are attractive candidates for implants in bone regeneration and tissue engineering with a possibility of loading biologically active molecules and controlled release.

Repairing a bone defect with a three-dimensional cellular construct composed of a multi-layered cell sheet on electrospun mesh

In addition to providing maneuverability, electrospun nanofibrous meshes can make excellent supports for constructing flexible cell sheets to regulate cell behavior by nanofiber features. With the target of bone regeneration, herein composite nanofibers with two different fiber arrangements (nestlike, random) were electrospun from a blend solution containing poly(l-lactide) (PLLA) and gelatin (1:1 in weight ratio). Unlike the non-woven morphology in a random nanofibrous mesh, PLLA/gelatin composite nanofibers in the nestlike nanofibrous mesh displayed both non-woven and parallel morphologies. Both kinds of nanofibrous mesh were ∼50 μm thick as-prepared, and shrank to ∼30 μm after seeding with bone mesenchymal stromal cells (BMSCs). After 7 days of in vitro culture, cell sheets could form on both meshes (CSM) and on the culture plate. It was found that application of nanofibrous mesh promoted the osteogenic differentiation of BMSC sheets compared with the control. The nestlike mesh displayed slight superiority over the random mesh in enhancing osteogenic differentiation, but their different fiber arrangements did not cause much difference in cell proliferation. Three-dimensional multi-layered CSM constructs were built by stacking four mono-layered CSMs together. The CSM constructs (based on a nestlike or random nanofibrous mesh) were incubated in vitro for 3 days before being implanted into rat cranial defects. In comparison with the control group, there was significant formation of new calcified bone in both CSM construct-filled groups at 12 weeks' post-operation. The nestlike group showed slightly better bone healing (based on both qualitative and quantitative analysis) than the random group, while showing insignificant differences. We showed that the concept of using a three-dimensional multi-layered CSM construct in enhancing bone regeneration was feasible. Future studies should take more nanofiber features (e.g. bioactive components) into account to further enhance osteogenesis.

Electrospun Polycaprolactone/Aloe Vera_Chitosan Nanofibrous Asymmetric Membranes Aimed for Wound Healing Applications

Today, none of the wound dressings available on the market is fully capable of reproducing all the features of native skin. Herein, an asymmetric electrospun membrane was produced to mimic both layers of skin. It comprises a top dense layer (manufactured with polycaprolactone) that was designed to provide mechanical support to the wound and a bottom porous layer (composed of chitosan and Aloe Vera) aimed to improve the bactericidal activity of the membrane and ultimately the healing process. The results obtained revealed that the produced asymmetric membranes displayed a porosity, wettability, as well as mechanical properties similar to those presented by the native skin. Fibroblast cells were able to adhere, spread, and proliferate on the surface of the membranes and the intrinsic structure of the two layers of the membrane is capable of avoiding the invasion of microorganisms while conferring bioactive properties. Such data reveals the potential of these asymmetric membranes, in the near future, to be applied as wound dressings.

Antibacterial Performance of a PCL-PDMAEMA Blend Nanofiber-Based Scaffold Enhanced with Immobilized Silver Nanoparticles

In the present study, nanofiber meshes (NFs), composed of polycaprolactone and poly[(2-dimethylamino)ethyl methacrylate] at 80/20 and 50/50 PCL/PDMAEMA blend ratios, were obtained through electrospinning. Silver nanoparticles (AgNPs) formed in situ were then immobilized on NF surfaces through adsorption processes at different pHs. It was possible to observe that the amount of NF-AgNPs can be tuned by changing the pH of AgNPs immobilization and the PCL/PDMAEMA ratio in the blend. The neat NF and NF-AgNPs were characterized with respect to their morphology and mechanical properties. The effects of AgNPs on the antibacterial activities and cytotoxicity of meshes were also evaluated. The antibacterial performance of such NF was improved by the presence of AgNPs. The NF-AgNPs presented good antibacterial effect against S. aureus and partial toxicity against E. coli and P. aeruginosa. Also, compared with neat PCL/PDMAEMA the NF-AgNPs presented lower cytotoxicity against VERO cells, showing their potential for applications in tissue engineering for different types of cell growth.

Physicochemical properties of polycaprolactone/collagen/elastin nanofibers fabricated by electrospinning

Collagen and elastin are the two most abundant proteins in the human body, and as biomaterials offer fascinating properties to composite materials. More detailed investigations including these biomaterials within reinforced composites are still needed. This report describes physicochemical properties of fibers composed of collagen type I, collagen III, elastin and polycaprolactone (PCL). Prior to the electrospinning process, PCL was functionalized through covalent attachment of -NH₂ groups by aminolysis reaction with hexamentilendiamine. The fibers were fabricated by electrospinning technique set up with a non-conventional collector. A morphological comparative study was developed at different rations of collagen type I, observing in some cases two populations of fibers. The diameters and morphology were analyzed by SEM, observing a wide array of nanostructures with diameters of ~310 to 693nm. Chemical characterization was assessed by FT-IR spectroscopy and the functionalized PCL was characterized through ninhydrin assay resulting in 0.36mM NH₂/mg fiber. Swelling tests were performed for 24h, obtaining 320% for the majority of the fibers indicating morphological stability and good water uptake. In addition, contact angle analysis demonstrated adequate permeability and differences for each system depending mainly upon the type of biopolymer incorporated and the functionalization of PCL, ranging the values from 108° to 17°. Moreover, differential scanning calorimetry results showed a melting temperature (T_m) of ~60°C. The onset degradation temperatures (T_d,onset) ranged between 115 and 148°C, and were obtained by thermogravimetric analysis. The local mechanical properties of individual fibers were quantified by atomic force acoustic microscopy. These results propose that the physicochemical and mechanical properties of these scaffolds offer the possibility for enhanced biological activity Thus, they have a great potential as candidate scaffolds in tissue engineering applications.

Activity and stability analysis of covalent conjugated lysozyme-single walled carbon nanotubes: potential biomedical and industrial applications

Analysis of covalent conjugated lysozyme-single walled carbon nanotubes.

Investigation of the dinuclear effect of aluminum complexes in the ring-opening polymerization of ε-caprolactone

Al complexes bearing hydrazine-bridging Schiff base ligands showed the best catalytic activity, approximately 3- to 11-fold higher than that of dinuclear Al complexes bearing Salen ligands and mononuclear Al complexes bearing Schiff base ligands.