Metal-organic frameworks for analytical chemistry: from sample collection to chromatographic separation

Subcomponent self-assembly construction of tetrahedral cage FeII4L4 for high-resolution gas chromatographic separation

Metal organic cages (MOCs), as an emerging discrete supramolecular compounds, have received widespread attention in separation, biomedicine, gas capture, catalysis, and molecular recognition due to their porosity, adjustability and stability. Herein, we present a new chiral MOC FeII4L4 coated capillary column prepared for gas chromatographic (GC) separation of different types of organic compounds, including n-alkanes, n-alcohols, alkylbenzenes, isomers, especially for racemic compounds. There are 20 different kinds of racemates (e.g., alcohols, ethers, epoxides, esters, alkenes, and aldehydes) were well resolved on the FeII4L4 chiral column and a maximum resolution value for 1-phenyl-1-propanol reaches 6.17. The FeII4L4 coated column exhibited high column efficiency (3100 plates m-1 for n-dodecane) and good enantiomeric resolution complementary to that of a commercial β-DEX 120 column and the previously reported chiral MOC [Fe4L6] (ClO4)8 coated column. The relative standard deviation (RSDs) of the peak area and retention time of glycidol and nitrotoluene were below 1.2 %. This study reveals that chiral MOCs have good application prospects in chromatographic separation.

Recent progress for chiral stationary phases based on chiral porous materials in high-performance liquid chromatography and gas chromatography separation

Chirality is a fundamental property of nature. Separation and analysis of racemates are of great importance in the fields of medicine and the production of chiral biopharmaceutical intermediates. Chiral chromatography has the characteristics of a wide separation range, fast separation speed, and high efficiency. The development and preparation of novel chiral stationary phases with good chiral recognition and separation capacity is the core and key of chiral chromatographic separation and analysis. In this work, the representative research progress of novel chiral porous crystal materials including chiral covalent organic frameworks, chiral porous organic cages, chiral metal-organic frameworks, and chiral metal-organic cages used as chiral stationary phases of capillary gas chromatography and high-performance liquid chromatography over the last 4 years is reviewed in detail. The chiral recognition and separation properties of the representative studies in this review are also introduced and discussed.

Textural Precursor Compositions Harvested for Independent Signal Generators: Scaling Micron-Sized Flower-Like Metal-Organic Frameworks as Amplifying Units for Dual-Mode Glycoprotein Assay

In this work, a micron-sized flower-like metal-organic frameworks (MOFs)-based boronate-affinity sandwich-type immunoassay was fabricated for the dual-mode glycoprotein assay. For proof of concept, the flower-like MOFs were synthesized from transition Cu nodes and tetrakis (4-carboxyphenyl) porphyrin (TCPP) ligands by spontaneous standing assembly. In addition, the specificity toward glycoprotein involved the antigen recognition as well as covalent bonding via the boronate-glycan affinity, and the immediate signal responses were initiated by textural decomposition of the flower-like MOFs. Intriguingly, Cu nodes, of which the valence state is dominant by CuI species, can endow the Fenton-like catalytic reaction of the fluorogenic substrate for generating fluorescence signals. For benefits, TCPP ligands, in which each TCPP molecule has four guest donors, can provide multiple valences for the assembly of cyclodextrin-capped gold nanoparticles via host-guest interaction for colorimetry output. Albeit important, the scaling micrometer patterns for the flower-like MOFs carrying numerous Cu nodes and TCPP ligands can also function as amplifying units, signifying the output signal. The detection limit of the dual-mode glycoprotein assay can reach 10.5 nM for the fluorescence mode and 18.7 nM for the colorimetry mode, respectively. Furthermore, the merits of harvesting different signal generators toward the multimodal readout patterns can allow the mutual verification and make the analytical results more reliable. Collectively, our proposed assay may offer a new idea in combining the inherent textural merits from MOFs for dual signal generators, which can also emphasize accurate detection capability for glycoprotein assay.

Quartz Crystal Microbalance as a Holistic Detector for Quantifying Complex Organic Matrices during Liquid Chromatography: 1. Coupling, Characterization, and Validation

A matrix in highly complex samples can cause adverse effects on the trace analysis of targeted organic compounds. A suitable separation of the target analyte(s) and matrix before the instrumental analysis is often a vital step for which chromatographic cleanup methods remain one of the most frequently used strategies, particularly high-performance liquid chromatography (HPLC). The lack of a simple real-time detection technique that can quantify the entirety of the matrix during this step, especially with gradient solvents, renders optimization of the cleanup challenging. This paper, along with a companion one, explores the possibilities and limitations of quartz crystal microbalance (QCM) dry-mass sensing for quantifying complex organic matrices during gradient HPLC. To this end, this work coupled a QCM and a microfluidic spray dryer with a commercial HPLC system using a flow splitter and developed a calibration and data processing strategy. The system was characterized in terms of detection and quantification limits, with LOD = 4.3-15 mg/L and LOQ = 16-52 mg/L, respectively, for different eluent compositions. Validation of natural organic matter in an environmental sample against offline total organic carbon analysis confirmed the approach's feasibility, with an absolute recovery of 103 ± 10%. Our findings suggest that QCM dry-mass sensing could serve as a valuable tool for analysts routinely employing HPLC cleanup methods, offering potential benefits across various analytical fields.

Two-dimensional chiral metal-organic framework nanosheets L-hyp-Ni/Fe@SiO2 composite for HPLC separation

In this study, we have synthesised a chiral l-hyp-Ni/Fe@SiO2 composite as a chiral stationary phase (CSP) for high-performance liquid chromatography (HPLC) for the first time. This was achieved by coating two-dimensional (2D) chiral metal-organic framework nanosheets (MONs) l-hyp-Ni/Fe onto the surface of activated SiO2 microspheres using the "wrapped in net" method. The separation efficiency of the l-hyp-Ni/Fe chromatographic column was systematically evaluated in normal-phase HPLC (NP-HPLC) and reversed-phase HPLC (RP-HPLC) configurations, employing various racemates as analytes. The findings revealed that 16 chiral compounds were separated using NP-HPLC, and five were separated using RP-HPLC, encompassing alcohols, amines, ketones, esters, alkanes, ethers, amino acids and sulfoxides. Notably, the resolution (Rs) of nine chiral compounds exceeded 1.5, indicating baseline separation. Furthermore, the resolution performance of the l-hyp-Ni/Fe@SiO2-packed column was compared with that of Chiralpak AD-H. It was observed that certain enantiomers, which either could not be resolved or were inadequately separated on the Chiralpak AD-H column, attained separation on the 2D chiral MONs column. These findings suggest a complementary relationship between the two columns in racemate separation, with their combined application facilitating the resolution of a broader spectrum of chiral compounds. In addition, baseline separation was achieved for five positional isomers on the l-hyp-Ni/Fe@SiO2-packed column. The effects of the analyte mass and column temperature on the resolution were also examined. Moreover, during HPLC analysis, the l-hyp-Ni/Fe columns demonstrated commendable repeatability, stability and reproducibility in enantiomer separation. This research not only advances the utilisation of 2D chiral MONs as CSPs but also expands their applications in the separation sciences.

ZIF-8 Nanoparticle: A Valuable Tool for Improving Gene Delivery in Sperm-Mediated Gene Transfer

Metal-organic frameworks (MOFs) are porous materials with unique characteristics that make them well-suited for drug delivery and gene therapy applications. Among the MOFs, zeolitic imidazolate framework-8 (ZIF-8) has emerged as a promising candidate for delivering exogenous DNA into cells. However, the potential of ZIF-8 as a vector for sperm-mediated gene transfer (SMGT) has not yet been thoroughly explored.This investigation aimed to explore the potential of ZIF-8 as a vector for enhancing genetic transfer and transgenesis rates by delivering exogenous DNA into sperm cells. To test this hypothesis, we employed ZIF-8 to deliver a plasmid expressing green fluorescent protein (GFP) into mouse sperm cells and evaluated the efficiency of DNA uptake. Our findings demonstrate that ZIF-8 can efficiently load and deliver exogenous DNA into mouse sperm cells, increasing GFP expression in vitro. These results suggest that ZIF-8 is a valuable tool for enhancing genetic transfer in SMGT, with important implications for developing genetically modified animals for research and commercial purposes. Additionally, our study highlights the potential of ZIF-8 as a novel class of vectors for gene delivery in reproductive biology.Overall, our study provides a foundation for further research into using ZIF-8 and other MOFs as gene delivery systems in reproductive biology and underscores the potential of these materials as promising vectors for gene therapy and drug delivery.

Nanoleaf-derived carbon materials as a sensitivity coating for solid‑phase microextraction of polycyclic aromatic hydrocarbons

Metal-organic framework-derived carbon materials have shown extensive application in the sensitive extraction of polycyclic aromatic hydrocarbons (PAHs), but more active sites for its adsorption were still a tireless pursuit. In this study, ZIF-nanoleaf-derived carbon (NLCs) was synthesized and developed as a solid-phase microextraction (SPME) fiber (NLCs-F). The extraction performance was compared with ZIF-dodecahedron-derived carbon (DHCs) coated fiber (DHCs-F), which was prepared by only changing the ratio of the reactants. The unique morphology of NLCs provided abundant adsorption active sites for the selected PAHs, while the large average aperture facilitated selective extraction of high molecular weight analytes. Additionally, the high carbon content enhanced the strong enrichment capability for hydrophobic PAHs. Hence, the prepared NLCs-F coupled with GC-MS showed a good correlation coefficient (0.9975) in a wide linear range, low limits of detection (0.3-1.8 ng L-1), satisfactory repeatability, and reproducibility, which made it apply in the enrichment of PAHs in actual tea and coffee samples.

Exploitation of multi-walled carbon nanotubes/Cu(ii)-metal organic framework based glassy carbon electrode for the determination of orphenadrine citrate

Metal organic frameworks (MOFs), with structural tunability, high metal content and large surface area have recently attracted the attention of researchers in the field of electrochemistry. In this work, an unprecedented use of multi-walled carbon nanotubes (MWCNTs)/copper-based metal-organic framework (Cu-BTC MOF) composite as an ion-to-electron transducer in a potentiometric sensor is proposed for the determination of orphenadrine citrate. A comparative study was conducted between three proposed glassy carbon electrodes, Cu-MOF, (MWCNTs) and MWCNTs/Cu-MOF composite based sensors, where Cu-MOF, MWCNTs and their composite were utilized as the ion-to-electron transducers. The sensors were developed for accurate and precise determination of orphenadrine citrate in pharmaceutical dosage form, spiked real human plasma and artificial cerebrospinal fluid (ACSF). The sensors employed β-cyclodextrin as a recognition element with the aid of potassium tetrakis(4-chlorophenyl)borate (KTpCIPB) as a lipophilic ion exchanger. The sensors that were assessed based on the guidelines recommended by IUPAC and demonstrated a linear response within the concentration range of 10-7 M to 10-3 M, 10-6 M to 10-2 M and 10-8 M to 10-2 M for Cu-MOF, MWCNTs and MWCNTs/Cu-MOF composite based sensors, respectively. MWCNTs/Cu-MOF composite based sensor showed superior performance over other sensors regarding lower limit of detection (LOD), wider linearity range and faster response. The sensors demonstrated their potential as effective options for the analysis of orphenadrine citrate in quality control laboratories and in different healthcare activities.

Metal-Organic Frameworks Meet Polymers: From Synthesis Strategies to Healthcare Applications

Metal-organic frameworks (MOFs) have been at the forefront of nanotechnological research for the past decade owing to their high porosity, high surface area, diverse configurations, and controllable chemical structures. They are a rapidly developing class of nanomaterials that are predominantly applied in batteries, supercapacitors, electrocatalysis, photocatalysis, sensors, drug delivery, gas separation, adsorption, and storage. However, the limited functions and unsatisfactory performance of MOFs resulting from their low chemical and mechanical stability hamper further development. Hybridizing MOFs with polymers is an excellent solution to these problems, because polymers-which are soft, flexible, malleable, and processable-can induce unique properties in the hybrids based on those of the two disparate components while retaining their individuality. This review highlights recent advances in the preparation of MOF-polymer nanomaterials. Furthermore, several applications wherein the incorporation of polymers enhances the MOF performance are discussed, such as anticancer therapy, bacterial elimination, imaging, therapeutics, protection from oxidative stress and inflammation, and environmental remediation. Finally, insights from the focus of existing research and design principles for mitigating future challenges are presented.

The rise of metal-organic framework based micromotors

Micromotors (MMs) are micro and nanoscale devices capable of converting energy into autonomous motion. Metal-organic frameworks (MOFs) are crystalline materials that display exceptional properties such as high porosity, internal surface areas, and high biocompatibility. As such, MOFs have been used as active materials or building blocks for MMs. In this highlight, we describe the evolution of MOF-based MMs, focusing on the last 3 years. First, we covered the main propulsion mechanisms and designs, from catalytic to fuel-free MOF-based MMs. Secondly, we discuss recent applications of new fuel-free MOFs MM to give a critical overview of the current challenges of this blooming research field. The advantages and challenges discussed provide a useful guide for the design of the next generation MOF MMs toward real-world applications.

Covalent organic framework in situ grown on the metal-organic framework as fiber coating for solid-phase microextraction of polycyclic aromatic hydrocarbons in tea

A novel MIL-88-NH2@COF composite was produced by in situ growth of covalent organic framework (COF) on the metal-organic framework (MOF) surface. To obtain a coating fiber for solid-phase microextraction (SPME), the MIL-88-NH2@COF composite physically adhered to the stainless steel wire. Combined with gas chromatography-flame ionization detection (GC-FID), various analytes such as chlorophenols (CPs), phthalates (PAEs), and polycyclic aromatic hydrocarbons (PAHs) were extracted and determined to evaluate the extraction performance of MIL-88-NH2@COF coated fibers and explore their extraction mechanism. This composite exhibit excellent extraction performance and adsorption capacity for various analytes, especially for PAHs with enrichment factor up to 9858. The SPME-GC-FID method based on MIL-88-NH2@COF fiber was established for the determination of five PAHs after the main extraction conditions were optimized. Under optimal conditions, the proposed technique showed a wide linear range (1-150 ng mL-1) with a low limit of detection (0.019 ng mL-1) and a high coefficient of determination (R2 > 0.99). The developed SPME-GC-FID method was used to determine PAHs in green tea and black tea samples, with good recoveries of 51.70-103.64% and 68.56-103.64%, respectively. It is worth mentioning that this is the first time MIL-88-NH2@COF composites have been prepared and applied to SPME. The preparation method of the composite provides a new idea in adsorbent preparation, which will contribute to the field of SPME.

Rapid In-Field Volatile Sampling for Detection of Botrytis cinerea Infection in Wine Grapes

Fungal infection of grape berries (Vitis vinifera) by Botrytis cinerea frequently coincides with harvest, impacting both the yield and quality of grape and wine products. A rapid and non-destructive method for identifying B. cinerea infection in grapes at an early stage prior to harvest is critical to manage loss. In this study, zeolitic imidazolate framework-8 (ZIF-8) crystal was applied as an absorbent material for volatile extraction from B. cinerea infected and healthy grapes in a vineyard, followed by thermal desorption gas chromatography-mass spectrometry. The performance of ZIF-8 in regard to absorbing and trapping the targeted volatiles was evaluated with a standard solution of compounds and with a whole bunch of grapes enclosed in a glass container to maintain standard sampling conditions. The results from the sampling methods were then correlated to B. cinerea infection in grapes, as measured and determined by genus-specific antigen quantification. Trace levels of targeted compounds reported as markers of grape B. cinerea infection were successfully detected with in-field sampling. The peak area counts for volatiles 3-octanone, 1-octen-3-one, 3-octanol, and 1-octen-3-ol extracted using ZIF-8 were significantly higher than values achieved using Tenax^®-TA from field testing and demonstrated good correlation with B. cinerea infection severities determined by B. cinerea antigen detection.

In situ growth of porous organic framework on iron wire for microextraction of polycyclic aromatic hydrocarbons

In this work, a novel spherical metal organic framework (MOF) was first in situ grown on the surface of iron wire (IW), in which IW served as the substrate and metal source for MOF (type NH₂-MIL88) growth without adding additional metal salts in the process, while spherical NH₂-MIL88 provided more active sites for further construction of multifunctional composites. Subsequently, a covalent organic framework (COF) was covalently bonded to the surface of the NH₂-MIL88 to obtain the IW@NH₂-MIL88@COF fibers, which were used for headspace solid-phase microextraction (HS-SPME) of polycyclic aromatic hydrocarbons (PAHs) in milk samples prior to determination by gas chromatography-flame ionization detection (GC-FID). Compared with the fiber prepared by physical coating, the IW@NH₂-MIL88@COF fiber prepared by in situ growth and covalent bonding exhibits better stability and possesses more uniform layer. The extraction mechanism of the IW@NH₂-MIL88@COF fiber for PAHs was discussed, which mainly owed to π-π interactions and hydrophobic interactions. After optimization of the primary extraction conditions, the SPME-GC-FID method was established for five PAHs with a wide linear range (1-200 ng mL^-1), good linearity coefficient (0.9935-0.9987) and low detection limits (0.017-0.028 ng mL^-1). The relative recoveries for PAHs detection in milk samples ranged from 64.69 to 113.97%. This work not only provides new ideas for the in situ growth of other types of MOF, but also provides new methods for the construction of multifunctional composites.

Monitoring the Activation of Open Metal Sites in [FexM3-x(μ3-O)] Cluster-Based Metal-Organic Frameworks by Single-Crystal X-ray Diffraction

While trinuclear [FexM3-x(μ3-O)] cluster-based metal-organic frameworks (MOFs) have found wide applications in gas storage and catalysis, it is still challenging to identify the structure of open metal sites obtained through proper activations and understand their influence on the adsorption and catalytic properties. Herein, we use in situ variable-temperature single-crystal X-ray diffraction to monitor the structural evolution of [FexM3-x(μ3-O)]-based MOFs (PCN-250, M = Ni2+, Co2+, Zn2+, Mg2+) upon thermal activation and provide the snapshots of metal sites at different temperatures. The exposure of open Fe3+ sites was observed along with the transformation of Fe3+ coordination geometries from octahedron to square pyramid. Furthermore, the effect of divalent metals in heterometallic PCN-250 was studied for the purpose of reducing the activation temperature and increasing the number of open metal sites. The metal site structures were corroborated by X-ray absorption and infrared spectroscopy. These results will not only guide the pretreatment of [FexM3-x(μ3-O)]-based MOFs but also corroborate spectral and computational studies on these materials.

Effect of phenol formaldehyde-associated microplastics on soil microbial community, assembly, and functioning

Increasing investigations explore the effects of plastic pollutants on bacterial communities, diversity, and functioning in various ecosystems. However, the impact of microplastics (MPs) on the eukaryotic community, microbial assemblages, and interactions is still limited. Here, we investigated bacterial and micro-eukaryotic communities and functioning in soils with different concentrations of phenol formaldehyde-associated MPs (PF-MPs), and revealed the factors, such as soil properties, microbial community assembly, and interactions between microbes, influencing them. Our results showed that a high concentration (1%) of PF-MPs decreased the microbial interactions and the contribution of deterministic processes to the community assembly of microbes, and consequently changed the communities of bacteria, but not eukaryotes. A significant and negative relationship was determined between N₂O emission rate and functional genes related to nitrification, indicating that the competitive interactions between functional microbes would affect the nitrogen cycling of soil ecosystem. We further found that vegetable biomass weakly decreased in treatments with a higher concentration of PF-MPs and positively related to the diversity of micro-eukaryotic communities and functional diversity of bacterial communities. These results suggest that a high concentration of the PF-MPs would influence crop growth by changing microbial communities, interactions, and eukaryotic and functional diversity. Our findings provide important evidence for agriculture management of phenol formaldehyde and suggest that we must consider their threats to microbial community compositions, diversity, and assemblage in soils due to the accumulation of PF-MPs widely used in the field.

Grafting (S)-2-Phenylpropionic Acid on Coordinatively Unsaturated Metal Centers of MIL-101(Al) Metal-Organic Frameworks for Improved Enantioseparation

Chiral metal-organic frameworks (cMOFs) are emerging chiral stationary phases for enantioseparation owing to their porosity and designability. However, a great number of cMOF materials show poor separation performance for chiral drugs in high-performance liquid chromatography (HPLC). The possible reasons might be the irregular shapes of MOFs and the low grafting degree of chiral ligands. Herein, MIL-101-Ppa@SiO₂ was synthesized by a simple coordination post-synthetic modification method using (S)-(+)-2-Phenylpropionic acid and applied as the chiral stationary phase to separate chiral compounds by HPLC. NH₂-MIL-101-Ppa@SiO₂ prepared via covalent post-synthetic modification was used for comparison. The results showed that the chiral ligand density of MIL-101-Ppa@SiO₂ was higher than that of NH₂-MIL-101-Ppa@SiO₂, and the MIL-101-Ppa@SiO₂ column exhibited better chiral separation performance and structural stability. The binding affinities between MIL-101-Ppa@SiO₂ and chiral compounds were simulated to prove the mechanism of the molecular interactions during HPLC. These results revealed that cMOFs prepared by coordination post-synthetic modification could increase the grafting degree and enhance the separation performance. This method can provide ideas for the synthesis of cMOFs.

Multifunctional Luminescent Sensor Based on the Pb2+ Complex Containing a Tetrazolato Ligand

A series of luminescent Pb²⁺ complexes, [Pb(L¹)₂]_n (1), [Pb(L²)₂]_n (2), [Pb(L³)(NO₃)(H₂O)₂]_n (3), [Pb(L³)(Br)(H₂O)]_n (4), [Pb(L³)(Cl)(H₂O)]_n (5), and [Pb(L⁴)(H₂O)₂] (6) have been synthesized by treatment of polydentate tetrazolato ligands with various hydrated Pb²⁺ salts (HL¹ = 2-(1H-tetrazol-5-yl)pyridine, HL² = 3-(1H-tetrazol-5-yl)isoquinoline, HL³ = 6-(1H-tetrazol-5-yl)-2,2'-bipyridine, and H₂L⁴ = 6,6'-bis(1H-tetrazol-5-yl)-2,2'-bipyridine). These complexes have been characterized by IR, TGA, and elemental analysis. Their crystal structures have been determined by X-ray crystallography, and the phase purity of bulk samples were further confirmed by PXRD. Their luminescence properties have been investigated in detail, and their emission origin may involve ligand-centered π-π* transition, metal-centered s-p transition and charge-transfer character. It is interesting to note that 5 exhibits obviously enhanced red-shifted emission, whose photoluminescence quantum yield (PLQY = 16.5%) is much higher than the other compounds (≤2%). Most importantly, the emission property of 5 was strongly affected by temperature. When the temperature rises from 295 to 493 K, the emission maximum gradually shifts to high energy due to the loss of the aqua ligand. In contrast, when the temperature is lowered from 295 to 13 K, two emission bands were observed. The low-energy emission band exhibits a slight blue shift, while a new high-energy emission band appears at around 520 nm, which is assigned to ligand-centered phosphorescence. After removal of the coordinated aqua ligand, the emission of 5-H₂O is very sensitive to the vapors of volatile primary amines and acids, although they have different response mechanisms. This result indicates that 5-H₂O may be a potential multifunctional sensor for temperature, volatile amines, and acids. To decipher the emission origin, DFT calculations have also been carried out based on the structure units of these compounds.

Green Extraction Processes for Complex Samples from Vegetable Matrices Coupled with On-Line Detection System: A Critical Review

The detection of analytes in complex organic matrices requires a series of analytical steps to obtain a reliable analysis. Sample preparation can be the most time-consuming, prolonged, and error-prone step, reducing the reliability of the investigation. This review aims to discuss the advantages and limitations of extracting bioactive compounds, sample preparation techniques, automation, and coupling with on-line detection. This review also evaluates all publications on this topic through a longitudinal bibliometric analysis, applying statistical and mathematical methods to analyze the trends, perspectives, and hot topics of this research area. Furthermore, state-of-the-art green extraction techniques for complex samples from vegetable matrices coupled with analysis systems are presented. Among the extraction techniques for liquid samples, solid-phase extraction was the most common for combined systems in the scientific literature. In contrast, for on-line extraction systems applied for solid samples, supercritical fluid extraction, ultrasound-assisted extraction, microwave-assisted extraction, and pressurized liquid extraction were the most frequent green extraction techniques.

Construction of Cu-BTC by carboxylic acid organic ligand and its application in low temperature SCR denitration

The removal of NO has always been a hot issue in the treatment of coal-fired flue gas. In this paper, a hydrothermal synthesis method was used to prepare porous denitration catalysts with polycarboxyl organic isomers (trimellitic acid, phthalic acid, and benzoic acid). And then developed as the NO removing catalysts for low temperature selective catalytic reduction (SCR) with NH₃. XRD, BET, SEM, FTIR, XPS, Raman, H₂-TPR, NH₃-TPD and TG were used to analyze the crystallinity, microscopic morphology, surface functional groups and metal content. The results showed that: (1) From the crystal structure analysis, the catalyst prepared with 1,3,5 and 1,2,4-benzenetricarboxylic acid as ligands (1,3,5-A and 1,2,4-B) was Cu-BTC. (2) 1,3,5-A catalyst had a huge specific surface area, up to 1421.32 m²/g, and a pore volume up to 0.5798 cm³/g. (3) The prepared catalysts were applied to NH₃-SCR denitration, and the catalyst with Cu-BTC structure had relatively high catalytic performance, and the overall catalytic capacity showed an increasing trend with the temperature. (4) 1,3,5-A catalyst had stability and catalytic activity. When the temperature was 270 °C, the denitration efficiency reached 83.87%. And within 8 h, the denitration efficiency was stable up to 82%.

Designing oxide chemiresistors for detecting volatile aromatic compounds: recent progresses and future perspectives

Oxide chemiresistors have mostly been used to detect reactive gases such as ethanol, acetone, formaldehyde, nitric dioxide, and carbon monoxide. However, the selective and sensitive detection of volatile aromatic compounds such as benzene, toluene, and xylene, which are extremely toxic and harmful, using oxide chemiresistors remains challenging because of the molecular stability of benzene rings containing chemicals. Moreover, the performance of the sensing materials is insufficient to detect trace concentration levels of volatile aromatic compounds, which lead to harmful effects on human beings. Here, the strategies for designing highly selective and sensitive volatile aromatic compound gas sensors using oxide chemiresistors were suggested and reviewed. Key approaches include the use of thermal activation, design of sensing materials with high catalytic activity, the utilization of catalytic microreactors and bilayer structures with catalytic overlayer, and the pretreatment of analyte gases or post analysis of sensing signals. In addition, future perspectives from the viewpoint of designing sensing materials and sensor structures for high-performance and robust volatile aromatic compounds gas sensors are provided. Finally, we discuss possible applications of the sensors and sensor arrays.

Nano-sized zeolite-like metal-organic frameworks induced hematological effects on red blood cell

Understanding the toxicity of metal-organic frameworks (MOFs) is important for improving their biocompatibility in further applications, especially the hematotoxicity of MOFs due to the unavoidable contact of MOFs with blood in biomedical science. Here we report the hematotoxicity and underlying mechanisms of nano-sized zeolite-like MOFs ZIF-8 and ZIF-67 because of their wide applications in biomedical science. ZIF-67 induced significant hemolysis of red blood cell (Rb) through breaking the structure of membrane due to the generation of free radicals, whereas ZIF-8 was hematocompatible. ZIF-67 was thus internalized by Rb and then bound with hemoglobin via hydrogen bond and van der Waals force, which influenced the structure and function of hemoglobin in accompany with heme release. These findings reveal the detailed mechanism of the hematological effects of MOFs on Rb and are helpful to the assessment of the toxicity and potential health risks of MOFs and the design of biosafe MOFs for biomedical applications.

Development of hybrid monoliths incorporating metal–organic frameworks for stir bar sorptive extraction coupled with liquid chromatography for determination of estrogen endocrine disruptors in water and human urine samples

A novel coating based on hybrid monolith with metal–organic framework (MOF) onto conventional Teflon-coated magnetic stir bars was developed. For this purpose, the external surface of the Teflon stir bar was firstly vinylized in order to immobilize a glycidyl methacrylate (GMA)–based polymer onto the magnet. Then, an amino-modified MOF of type MIL-101 (NH₂-MIL-101(Al)) was covalently attached to the GMA-based monolith. After the synthesis process, several parameters affecting extraction of target estrogens by stir bar sorptive extraction (SBSE) including pH, ionic strength, extraction time, stirring rate, desorption solvent, and desorption time were also investigated. The resulting hybrid monolith was evaluated as SBSE sorbent for extraction of three estrogens (estrone, 17β-estradiol, estriol) and synthetic 17β-ethinylestradiol from water and human urine samples followed by HPLC with fluorescence detection (excitation and emission wavelengths, 280 and 310 nm, respectively). Under the optimal experimental conditions, the analytical figures of the method were established, achieving satisfactory limits of detection in the range of 0.015–0.58 µg L⁻¹, recovery results ranging from 70 to 95% with RSD less than 6%, and precision values (intra- and inter-extraction units) below 6%.

Recent trends on the implementation of reticular materials in column‐centered separations

Advances in the development of column‐based analytical separations are strongly linked to the development of novel materials. Stationary phases for chromatographic separation are usually based on silica and polymer materials. Nevertheless, recent advances have been made using porous crystalline reticular materials, such as metal‐organic frameworks and covalent organic frameworks. However, the direct packing of these materials is often limited due to their small crystal size and nonspherical shape. In this review, recent strategies to incorporate porous crystalline materials as stationary phases for liquid‐phase separations are covered. Moreover, we discuss the potential future directions in their development and integration into suitable supports for analytical applications. Finally, we discuss the main challenges to be solved to take full advantage of these materials as stationary phases for analytical separations.

Composite SPE Paper Membrane Based on the Functional Superstructure of Metal-Organic Frameworks and Ionic Liquids for Detection of Tetracycline-like Antibiotics

Composite adsorbents based on metal-organic frameworks (MOFs) are excellent candidates for solid-phase extraction (SPE) due to their diverse chemical functionality and multilevel porosity. MOF superstructures based on self-assembly at room temperature (RT) could have less energy consumption and easier manipulation due to the larger complex geometry. The π-π stacking of the benzene ring could not only enhance the interaction toward hydrophobic or plane-structured targets but also be expected to promote the formation of the MOF superstructure. In this work, in the established RT self-assembly synthesis system, several factors were investigated to see how to obtain functional MOF superstructures with a regular geometry, among which the number of benzene rings in the ligand was mainly tested for its impact on self-assembly and adsorption capacity. By means of adsorption experiments and computational fluid dynamics (CFD) simulation, the relationship between structure and activity (SARs) was further explored. Interestingly, the MOF unit with the lowest specific surface area performed the best in adsorption. Then, the selected functional MOF superstructure and ionic liquid were used to produce the composite paper membrane facilely applied in the SPE device. After optimization of the preparation conditions and operation parameters, the established SPE-HPLC-UV method could selectively analyze tetracycline-like antibiotics in the range of 16.6-833.3 ng/g (ppb) in a meat sample. This work provided an RT synthesis method to produce a microsize MOF superstructure, with experimental and theoretical insights into the SARs, which could be expanded in the design of other MOF-based SPE composite membranes toward one group of analogues.

Determining three isoflavones from Pueraria lobata using magnetic ZIF-8 nanoparticle-based solid-phase extraction and pressurized capillary electrochromatography

In this study, magnetic functionalized ZIF-8 nanoparticles were prepared by electrostatic self-assembly using magnetic Fe₃O₄ nanoparticles as cores and ZIF-8 as shells. ZIF-8 was used as the adsorbent to efficiently extract and sensitively analyze isoflavones due to its positive charge and strong adsorption capacity. Prepared samples were investigated by SEM and TEM, BET and ζ-potential analyses, FT-IR spectroscopy, powder XRD, and vibrating sample magnetism (VSM) experiments. The synthesized ZIF-8 has a dodecahedral structure that adsorbs well. Magnetic functionalized ZIF-8/Fe₃O₄ @SiO₂ nanoparticles were prepared as a new SPE adsorbent, and a magnetic ZIF-8-pressurized capillary electrochromatography (pCEC) method was developed to separate and detect puerarin, daidzin, and daidzein (isoflavones) from Pueraria lobata by optimizing the extraction conditions, including adsorbent dosage, salt concentration, extraction time, desorption conditions, and other parameters. The developed method exhibited good linearities in the 50-2000 μg/mL concentration range for the three isoflavones, with coefficients of determination of 0.9934-0.9962. The limits of detection (LODs) for puerarin, daidzin, and daidzein were determined to be 0.02, 0.03, and 0.03 μg/mL, respectively. All analytes showed average recoveries in the 98.5-100.3% range, with relative standard deviations (RSDs, n = 6) of less than 4.0%. The developed method is convenient, enriches effectively, and shows good applications prospects for separating and analyzing components in Chinese herbal medicines.

Enantioselective assembly and recognition of heterochiral porous organic cages deduced from binary chiral components

Chiral recognition and discrimination is not only of significance in biological processes but also a powerful method to fabricate functional supramolecular materials. Herein, a pair of heterochiral porous organic cages (HPOC-1), out of four possible enantiomeric products, with mirror stereoisomeric crystal structures were cleanly prepared by condensation occurring in the exclusive combination of cyclohexanediamine and binaphthol-based tetraaldehyde enantiomers. Nuclear magnetic resonance and luminescence spectroscopy have been employed to monitor the assembly process of HPOC-1, revealing the clean formation of heterochiral organic cages due to the enantioselective recognition of (S,S)-binaphthol towards (R,R)-cyclohexanediamine derivatives and vice versa. Interestingly, HPOC-1 exhibits circularly polarized luminescence and enantioselective recognition of chiral substrates according to the circular dichroism spectral change. Theoretical simulations have been carried out, rationalizing both the enantioselective assembly and recognition of HPOC-1.

Heterochiral organic cages based on enantioselective self-assembly of binary chiral components have been prepared, exhibiting circularly polarized luminescence property and enantioselective recognition ability towards chiral substrates according to the circular dichroism spectral change.

Defluoridation using hydroxyapatite implanted lanthanum organic framework-based bio-hybrid beads

The present study reports on biopolymer based material namely HAp–La-BTC MOFs@Alg–CS hybrid beads were developed and it was potentially employed for fluoride removal.

Template-directed synthesis of three-dimensional metal organic framework 199-derived highly porous copper nano-foam fiber for solid-phase microextraction of some antibiotics prior to their quantification by High performance liquid chromatography

The in-situ preparation of three-dimensional MOF-199 (3D MOF-199) derived from the electrochemically prepared highly porous nano Cu foam on the surface of a flexible copper wire is reported. The 3D-Cu foam coating was used as a precursor and template for fabrication of MOF-199. The microextraction ability of the in-situ prepared 3D-MOF-199 fiber was evaluated using the prepared fiber for solid phase microextraction (SPME) of selected antibiotics including amoxicillin, azithromycin, ciprofloxacin, cefixime and gentamicin coupled to high-performance liquid chromatography with UV detection. Under the optimized condition, the calibration curves were linear in the range of 1-100 µg L ^- 1 (r² above 0.9921) for both water and urine matrices. Limits of detection and limits of quantification were 0.14-0.62 µg L ^- 1 and 0.53-2.17 µg L ^- 1 in the selected matrices, respectively. In addition, the repeatability of the method was evaluated by considering the relative standard deviation (RSD%). The intra-day and inter-day RSDs of the method with the single fiber was in the range of 2.8% to 4.9% and from 3.1% to 4.9%, respectively. Furthermore, the fiber-to-fiber reproducibility ranged from 2.9% to 5.5%. The enrichment factors were also in the range of 32 to 55. Finally, the method was successfully used for analysis of amoxicillin, azithromycin, ciprofloxacin, cefixime and gentamicin in urine samples. Relative recoveries for spiked urine samples were in the range of 90-105%.

A simple fluorometric method for rapid screening of aflatoxins after their extraction by magnetic MOF-808/graphene oxide composite and their discrimination by HPLC

Herein, a high-performance screening tool for the selective and sensitive monitoring of aflatoxins is reported based on their great quenching effect on the blue emission of graphene quantum dots (GQDs). To make a specific determination, a pre-extraction method was also developed using a new nano-sorbent based on the surface-imprinted Zr metal-organic framework on the magnetic graphene oxide (MGO/MOF-808@MIP). The adsorbing efficiency of the prepared composite was remarkably higher than the pristine MOF-808 or bare GO. The presence of GO nanosheets, as well as nanoporous MOF-808 provided a high accessible surface area to form the MIP layer. It provided a great number of MIP sites for high efficient and rapid extraction of aflatoxins. The presence of magnetic nanoparticles in the structure of nanocomposite also facilitated the extraction process using a magnetic solid-phase extraction (MSPE) system. The combination of this specific and high-performance extraction with simple fluorometric detection caused a potent screening tool for aflatoxins. The method was able to monitor the total aflatoxins content of food samples with a linear range of 0.05-8 ng mL^-1, which was more sensitive than the fluorometric system without extraction (5-500 ng mL^-1). More developments were made by the application of a high-performance liquid chromatography (HPLC) method for the discrimination of the extracted aflatoxins. The system showed high sensitivity and selectivity and was able to detect different aflatoxins with an acceptable resolution.

Novel solid-phase microextraction fiber coatings: A review

The materials used for the fabrication of solid-phase microextraction fiber coatings in the past five years are summarized in the current review, including carbon, metal-organic frameworks, covalent organic frameworks, aerogel, polymer, ionic liquids/poly (ionic liquids), metal oxides, and natural materials. The preparation approaches of different coatings, such as sol-gel technique, in-situ growth, electrodeposition, and glue methods, are briefly reviewed together with the evolution of the supporting substrates. In addition, the limitations of the current coatings and the future development directions of solid-phase microextraction are presented.

Recent progress in the development of chiral stationary phases for high-performance liquid chromatography

Separations and analyses of chiral compounds are important in many fields, including pharmaceutical production, preparation of chemical intermediates, and biochemistry. High-performance liquid chromatography using a chiral stationary phase is regarded as one of the most valuable methods for enantiomeric separation and analysis because it is highly efficient, is broadly applicable, and has powerful separation capability. The focus for development of this method is the identification of novel chiral stationary phases with superior recognition performance and good stability. The present article reviews recent progress in the development of new chiral stationary phases for high-performance liquid chromatography between January 2018 and June 2021. These newly reported chiral stationary phases are divided into three categories: small organic molecule-based (cyclodextrin and its derivatives, macrocyclic antibiotics, cinchona alkaloids, and other low molecular weight chiral molecules), macromolecule-based (cellulose and amylose derivatives, chitin and chitosan derivatives, and synthetic helical polymers) and chiral porous material-based (chiral metal-organic frameworks, chiral covalent organic frameworks, and chiral inorganic mesoporous silicas). Each type of chiral stationary phase is discussed in detail.

Hollow zeolitic imidazolate framework-7 coated stainless steel fiber for solid phase microextraction of volatile biomarkers in headspace gas of breast cancer cell lines

In this work, we reported the preparation of the hollow zeolitic imidazolate framework-7 (ZIF-7) via etching ZIF-7 with tannic acid, and further fabricated the hollow ZIF-7 coated fiber for the solid phase microextraction (SPME) of the five volatile biomarkers (acetone, isopropanol, hexanal, hexanol and decanal) generated from breast cancer cell lines. The hollow structure not only endowed higher extraction performance for the SPME of analytes, but also improved the diffusion rate of the analytes inside the hollow ZIF-7. Under the optimal conditions, the hollow ZIF-7 coated fiber offered high extraction capacity (25-153 mg g^-1) and enhancement factors (EFs, 2023-11250) for the five biomarkers, good linearity (R² > 0.9918) of acetone and isopropanol (2.5-500 μg L^-1) and hexanol, hexanal, and decanal (1.0-100 μg L^-1), low limits of detection (S/N = 3) of 0.07-0.53 μg L^-1 and the limit of quantifications (LOQs, S/N = 10) of 0.23-1.76 μg L^-1. The precisions (RSDs, %) for intra-day (n = 6), inter-day (n = 5) and fiber-to-fiber (n = 6) were 2.8-7.5%, 4.3-8.5%, and 4.2-14.6%, respectively. The high EFs of the hollow ZIF-7 coated fiber for the five biomarkers resulted from the integrated effects of the large surface area, the unique porous structure, hydrophobic interaction, gate-opening effect, and enhanced properties after etching including faster mass transport, multiple active components, and more exposed active sites. The fabricated hollow ZIF-7 coated fiber lasted at least 140 cycles of extraction/desorption/aging without obvious decrease of extraction ability and no change of crystal structure. Finally, the hollow ZIF-7 coated fiber combined with GC-FID had been successfully used to detect the five biomarkers in the headspace gas of human breast cancer cell lines (MDA-MB-231) and normal mammary cell lines (CCD-1095Sk) with the recoveries of 84-105%. These results revealed the prospect of hollow MOFs as efficient adsorbents for sample pretreatment.

Revisiting molecular adsorption: unconventional uptake of polymer chains from solution into sub-nanoporous media

Adsorption of polymers from the solution phase has been extensively studied to cope with many demands not only for separation technologies, but also for the development of coatings, adhesives, and biocompatible materials. Most studies hitherto focus on adsorption on flat surfaces and mesoporous adsorbents with open frameworks, plausibly because of the preconceived notion that it is unlikely for polymers to enter a pore with a diameter that is smaller than the gyration diameter of the polymer in solution; therefore, sub-nanoporous materials are rarely considered as a polymer adsorption medium. Here we report that polyethylene glycols (PEGs) are adsorbed into sub-nanometer one-dimensional (1D) pores of metal-organic frameworks (MOFs) from various solvents. Isothermal adsorption experiments reveal a unique solvent dependence, which is explained by the balance between polymer solvation propensity for each solvent and enthalpic contributions that compensate for potential entropic losses from uncoiling upon pore admission. In addition, adsorption kinetics identify a peculiar molecular weight (MW) dependence. While short PEGs are adsorbed faster than long ones in single-component adsorption experiments, the opposite trend was observed in double-component competitive experiments. A two-step insertion process consisting of (1) an enthalpy-driven recognition step followed by (2) diffusion regulated infiltration in the restricted 1D channels explains the intriguing selectivity of polymer uptake. Furthermore, liquid chromatography using the MOFs as the stationary phase resulted in significant PEG retention that depends on the MW and temperature. This study provides further insights into the mechanism and thermodynamics behind the present polymer adsorption system, rendering it as a promising method for polymer analysis and separation.

Nanostructured Substrates as Matrices for Surface Assisted Laser Desorption/Ionization Mass Spectrometry: A Progress Report from Material Research to Biomedical Applications

Within the past two decades, the escalation of research output in nanotechnology fields has boosted the development of novel nanoparticles and nanostructured substrates for use as matrices in surface assisted laser desorption/ionization mass spectrometry (SALDI-MS). The application of nanomaterials as matrices, rather than organic matrices, offers remarkable characteristics that allow the analysis of small molecules with fewer matrix interfering peaks, and share higher detection sensitivity, specificity, and reproducibility. The technological advancement of SALDI-MS has in turn, propelled the application of the analytical technique in the field of biomedical analysis. In this review, the properties and fabrication methods of nanostructured substrates in SALDI-MS such as metallic-, carbon-, and silicon-based nanostructures, quantum dots, metal-organic frameworks, and covalent-organic frameworks are described. Additionally, the latest progress (most within 5 years) of biomedical applications in small molecule, large biomolecule, and MS imaging analysis including metabolite profiling, drug monitoring, bacteria identification, disease diagnosis, and therapeutic evaluation are demonstrated. Key parameters that govern nanomaterial's SALDI efficiency in biomolecule analysis are also discussed. Finally, perspectives of the future development are given to provide a better advancement and promote practical application in clinical MS.

Metal-Organic Frameworks as Versatile Media for Polymer Adsorption and Separation

Molecular recognition is of paramount importance for modern chemical processes and has now been achieved for small molecules using well-established host-guest chemistry and adsorption-science principles. In contrast, technologies for recognizing polymer structure are relatively undeveloped. Conventional polymer separation methods, which are mostly limited in practice to size-exclusion chromatography and reprecipitation, find it difficult to recognize minute structural differences in polymer structures as such small structural alterations barely influence the polymer characteristics, including molecular size, polarity, and solubility. Therefore, most of the polymeric products being used today contain mixtures of polymers with different structures as it is challenging to completely control polymer structures during synthesis even with state-of-the-art substitution and polymerization techniques. In this context, development of novel techniques that can resolve the challenges of polymer recognition and separation is in great demand, as these techniques hold the promise of a new paradigm in polymer synthesis, impacting not only materials chemistry but also analytical and biological chemistry.In biological systems, precise recognition and translation of base monomer sequences of mRNA are achieved by threading them through small ribosome tunnels. This principle of introducing polymers into nanosized channels can possibly help us design powerful polymer recognition and separation technologies using metal-organic frameworks (MOFs) as ideal and highly designable recognition media. MOFs are porous materials comprising organic ligands and metal ions and have been extensively studied as porous beds for gas separation and storage. Recently, we found that MOFs can accommodate large polymeric chains in their nanopores. Polymer chains can spontaneously infiltrate MOFs from neat molten and solution phases by threading their terminals into MOF nanochannels. Polymer structures can be recognized and differentiated due to such insertion processes, resulting in the selective adsorption of polymers on MOFs. This enables the precise recognition of the polymer terminus structure, resulting in the perfect separation of a variety of terminal-functionalized polymers that are otherwise difficult to separate by conventional polymer separation methods. Furthermore, the MOFs can recognize polymer shapes, thus enabling the large-scale separation of high purity cyclic polymers from the complex crude mixtures of linear polymers, which are used as precursor materials in common cyclization reactions. In solution-phase adsorption, many factors, including molecular weight, terminal groups, polymer shape, polymer-MOF interaction, and coexisting solvent molecules, influence the selective adsorption behavior; this yields a new liquid chromatography-based polymer separation technology using an MOF as the stationary phase. MOF-packed columns, in which a novel separation mode based on polymer insertion into the MOF operates under a dynamic insertion/rejection equilibrium at the liquid/solid interface, exhibited excellent polymer separation capability. The polymer recognition principle described in this study thus has a high probability for realizing previously unfeasible polymer separations based on monomer composition and sequences, stereoregularity, regioregularity, helicity, and block sequences in synthetic polymers and biomacromolecules.