Electrochemistry and electrogenerated chemiluminescence of BODIPY dyes

meso-Methyl Amination of BODIPYs by Regiospecific Cross Dehydrogenative Coupling via Direct C(sp3)-N(sp3) Bond Formation

Herein, we report a direct meso-methyl amination of BODIPY dyes by C(sp3)-N(sp3) bond formation using PIDA as an oxidant with a wide range of aliphatic secondary amines. This metal free cross dehydrogenative coupling reaction is regiospecific at the meso-methyl position of BODIPY in the presence of C1, C3, C5, and C7 methyl groups. Detailed nuclear magnetic resonance spectroscopy, high-resolution mass spectrometry, and X-ray crystallographic studies were performed to establish the reaction mechanism and the regiospecificity of the reaction. Finally, the photophysical and electrochemical properties of the newly synthesized dyes were evaluated and rationalized.

Critical Aspects and Challenges in the Design of Small Molecules for Electrochemiluminescence (ECL) Application

Electrochemiluminescence (ECL) has gained renewed interest due to the strong parallel development of luminophores in the field of organic light emitting diodes (OLEDs) with which this technique shares several aspects. In this perspective review we discuss the most relevant advances of the past 15 years in the study of organic and organometallic compounds as ECL emitters, by dividing them in three different classes: i) fluorescent emitters, ii) phosphorescent emitters and iii) Thermally Activated Delayed Fluorescence (TADF) emitters; then, water-soluble organic luminophores will be also discussed. We focus on how their design, their photo- and electrochemical properties and, in particular, the nature of the emitter, affect their efficiency in ECL. Regardless of the type of luminophore or the photoluminescence quantum yield (PLQY), the literature converges on the fact that the most determining aspect is the stability of the oxidized/reduced form of the emitter. Even if phosphorescent emitters can show outstanding efficiency, this often requires the absence of oxygen. In the case of TADFs, there is also a strong dependence of photoluminescence both in terms of PLQY and emission energy on the polarity of the media, so compounds, that appear promising in organic solvents, may be very inefficient in aqueous media.

Synthesis and Optoelectronic Properties of Threaded BODIPYs

We report on the synthesis of two new threaded BODIPYs 5 and 6 in good yields using boron as a gathering atom and a macrocycle with a 2,2'-biphenol unit. In addition to usual techniques, they were characterized by X-ray crystallography. Their electrochemical and optical properties were investigated. In particular, both compounds are highly emissive with photoluminescence quantum yields of 54 and 81 % respectively. In addition, they both show a high photostability.

Toward Accurate Calculation of Excitation Energies on Quantum Computers with ΔADAPT-VQE: A Case Study of BODIPY Derivatives

Quantum chemistry simulations offer a cost-effective way to computationally design BODIPY photosensitizers. However, accurate predictions of excitation energies pose a challenge for time-dependent density functional theory and equation-of-motion coupled-cluster singles and doubles methods. By contrast, reliable predictions can be achieved by multireference quantum chemistry methods; unfortunately, their computational cost increases exponentially with the number of electrons. Alternatively, quantum computing holds potential for an exact simulation of the photophysical properties in a computationally more efficient way. Herein, we introduce the state-specific ΔUCCSD-VQE (unitary coupled-cluster singles and doubles-variational quantum eigensolver) and ΔADAPT-VQE methods in which the electronically excited state is calculated via a non-Aufbau configuration. We show for six BODIPY derivatives that the proposed methods predict accurate excitation energies that are in good agreement with those from experiments. Due to its performance and simplicity, we believe that ΔADAPT will become a useful approach for the simulation of BODIPY photosensitizers on near-term quantum devices.

Photodynamic Therapy in the Treatment of Cancer-The Selection of Synthetic Photosensitizers

Photodynamic therapy (PDT) is a promising cancer treatment method that uses photosensitizing (PS) compounds to selectively destroy tumor cells using laser light. This review discusses the main advantages of PDT, such as its low invasiveness, minimal systemic toxicity and low risk of complications. Special attention is paid to photosensitizers obtained by chemical synthesis. Three generations of photosensitizers are presented, starting with the first, based on porphyrins, through the second generation, including modified porphyrins, chlorins, 5-aminolevulinic acid (ALA) and its derivative hexyl aminolevulinate (HAL), to the third generation, which is based on the use of nanotechnology to increase the selectivity of therapy. In addition, current research trends are highlighted, including the search for new photosensitizers that can overcome the limitations of existing therapies, such as heavy-atom-free nonporphyrinoid photosensitizers, antibody-drug conjugates (ADCs) or photosensitizers with a near-infrared (NIR) absorption peak. Finally, the prospects for the development of PDTs are presented, taking into account advances in nanotechnology and biomedical engineering. The references include both older and newer works. In many cases, when writing about a given group of first- or second-generation photosensitizers, older publications are used because the properties of the compounds described therein have not changed over the years. Moreover, older articles provide information that serves as an introduction to a given group of drugs.

Porphyrin-BODIPY Dyad: Enhancing Photodynamic Inactivation via Antenna Effect

A porphyrin-BODIPY dyad (P-BDP) was obtained through covalent bonding, featuring a two-segment design comprising a light-harvesting antenna system connected to an energy acceptor unit. The absorption spectrum of P-BDP resulted from an overlap of the individual spectra of its constituent parts, with the fluorescence emission of the BODIPY unit experiencing significant quenching (96 %) due to the presence of the porphyrin unit. Spectroscopic, computational, and redox investigations revealed a competition between photoinduced energy and electron transfer processes. The dyad demonstrated the capability to sensitize both singlet molecular oxygen and superoxide radical anions. Additionally, P-BDP effectively induced the photooxidation of L-tryptophan. In suspensions of Staphylococcus aureus cells, the dyad led to a reduction of over 3.5 log (99.99 %) in cell survival following 30 min of irradiation with green light. Photodynamic inactivation caused by P-BDP was also extended to the individual bacterium level, focusing on bacterial cells adhered to a surface. This dyad successfully achieved the total elimination of the bacteria upon 20 min of irradiation. Therefore, P-BDP presents an interesting photosensitizing structure that takes advantage of the light-harvesting antenna properties of the BODIPY unit combined with porphyrin, offering potential to enhance photoinactivation of bacteria.

Solvent and alkyl substitution effects on charge-transfer mediated triplet state generation in BODIPY dyads: a combined computational and experimental study

Donor-acceptor dyads based on BODIPYs have been recently employed to enhance the formation of triplet excited states with the process of spin-orbit charge transfer intersystem crossing (SOCT-ISC) which does not require introduction of transition metals or other heavy atoms into the molecule. In this work we compare two donor-acceptor dyads based on meso-naphthalenyl BODIPY by combining experimental and computational investigations. The photophysical and electrochemical characterization reveals a significant effect of alkylation of the BODIPY core, disfavoring the SOCT-ISC mechanism for the ethylated BODIPY dyad. This is complemented with a computational investigation carried out to rationalize the influence of ethyl substituents and solvent effects on the electronic structure and efficiency of triplet state population via charge recombination (CR) from the photoinduced electron transfer (PeT) generated charge-transfer (CT) state. Time dependent-density functional theory (TD-DFT) calculations including solvent effects and spin-orbit coupling (SOC) calculations uncover the combined role played by solvent and alkyl substitution on the lateral positions of BODIPY.

Electrochemical Diselenation of BODIPY Fluorophores for Bioimaging Applications and Sensitization of 1 O2

We report a rapid, efficient, and scope-extensive approach for the late-stage electrochemical diselenation of BODIPYs. Photophysical analyses reveal red-shifted absorption - corroborated by TD-DFT and DLPNO-STEOM-CCSD computations - and color-tunable emission with large Stokes shifts in the selenium-containing derivatives compared to their precursors. In addition, due to the presence of the heavy Se atoms, competitive ISC generates triplet states which sensitize 1 O2 and display phosphorescence in PMMA films at RT and in a frozen glass matrix at 77 K. Importantly, the selenium-containing BODIPYs demonstrate the ability to selectively stain lipid droplets, exhibiting distinct fluorescence in both green and red channels. This work highlights the potential of electrochemistry as an efficient method for synthesizing unique emission-tunable fluorophores with broad-ranging applications in bioimaging and related fields.

Dyads and Triads of Boron Difluoride Formazanate and Boron Difluoride Dipyrromethene Dyes

Dye-dye conjugates have attracted significant interest for their utility in applications such as bioimaging, theranostics, and light-harvesting. Many classes of organic dyes have been employed in this regard; however, building blocks don't typically extend beyond small chromophores. This can lead to minor changes to the optoelectronic properties of the original dye. The exploration of dye-dye structures is impeded by long synthetic routes, incompatible synthetic conditions, or a mismatch of the desired properties. Here, we present the first-of-their-kind dye-dye conjugates of boron difluoride complexes of formazanate and dipyrromethene ligands. These conjugates exhibit dual photoluminescence bands that reach the near-infrared spectral region and implicate anti-Kasha processes. Cyclic voltammetry experiments revealed the generation of polyanionic species that can reversibly tolerate the uptake of up to 6 electrons. Ultimately, we demonstrate that BF2 formazanates can serve as a synthetically accessible platform to build upon new classes of dye-dye conjugates.

Selenium and nitrogen co-doped carbon dots with highly efficient electrochemiluminescence for ultrasensitive detection of microRNA

In this work, selenium and nitrogen co-doped carbon dots (SeN-CDs) possessing highly efficient electrochemiluminescence (ECL) and excellent biocompatibility were synthesized as a new emitter with S2O82- as a coreactant for constructing a biosensor to detect microRNA-221 (miRNA-221) sensitively. Notably, the SeN-CDs exhibited superior ECL performance compared with the N-doped CDs, in which selenium with excellent redox activity served as a coreaction accelerator for facilitating the electroreduction of S2O82- to significantly improve ECL efficiency. Furthermore, target-induced T7 exonuclease (T7 Exo)-assisted double cycle amplification strategy could convert traces of target miRNA-221 into large amounts of output DNA to capture three-dimensional (3D) nanostructures (DTN-Au NPs-DOX-Fc) loaded with large amounts of ECL signal quencher. The constructed biosensor could realize ultrasensitive detection of miRNA-221 and has a low detection limit reaching 2.3 aM, with a successful application to detect miRNA-221 in lysate of Hela and MHCC97-L cancer cell. This work explored a novel method to strengthen the ECL performance of CDs to construct an ECL biosensing platform with sensitive detecting of biomarkers and disease diagnosis.

Electrochemiluminescence of dimethylaminonaphthalene-oxazaborine donor-acceptor luminophores

Donor-acceptor (D-A) type molecules with a skeleton consisting of a dimethylaminonaphthalene donor and an oxazaborine acceptor were designed as efficient electrochemiluminescence (ECL) luminophores with tunable intramolecular charge transfer (ICT). The D-A ECL luminophores demonstrated that the ICT characteristics play a critical role in the electrochemistry and ECL of luminophores in the presence of tri-n-propylamine, which was rationalised experimentally and computationally. Furthemore, dual-peaked ECL-potential behaviours of the luminophores were rationalised using two competitive pathway ECL mechanisms, elucidated through the use of spooling ECL spectroscopy.

Tuning the Photophysical Properties of Aza-BODIPYs in the Near-Infrared Region by Introducing Electron-Donating Thiophene Substituents

This study presents the synthesis, the spectroscopic and electrochemical properties of new bis- and tetra-substituted azaboron-dipyrromethene (aza-BODIPY) dyes substituted by different electron donating groups connected to the aza-BODIPY core through a thiophene unit. In line with theoretical calculations, experimental measurements point out the positive impact of the thiophene group that behave as a secondary donor group leading to an enhancement of the intramolecular charge transfer process in comparison to previously reported aza-BODIPY dyes. This heterocycle has also been found to tune the oxidative potential and to stabilize the electro-generated species.

Luminophore-Surface-Engineering-Enabled Low-Triggering-Potential and Coreactant-Free Electrochemiluminescence for Protein Determination

Coreactant-free electrochemiluminescence (ECL) is promising for removing the exogenous effects of coreactant and simplify the operation procedures and setups of commercialized ECL bioassays. Herein, an electrosterically involved strategy for achieving a low-triggering-potential (+0.21 V vs Ag/AgCl) and coreactant-free ECL from dual-stabilizer-capped CdTe nanocrystals (NCs) is proposed with mercaptopropionic acid (MPA) and hexametaphosphate (HMP) as the capping agents of luminophores. Upon employing the CdTe NCs as the ECL tag for the immunoassay, all the tags in the bioconjugates of the CdTe NCs and the secondary antibody (Ab₂|CdTe) as well as in the final achieved sandwich-type immunocomplexes can exhibit efficient coreactant-free ECL with an electrosterically involved triggering potential nature. The bioconjugates of Ab₂|CdTe with Ab₂ no more than 30 kDa, such as the thyroid stimulating hormone (30 kDa) and the recombinant pro-gastrin releasing peptide (ProGRP, 14 kDa), merely exhibit coreactant-free ECL around +0.24 V, while bioconjugates of Ab₂|CdTe with an Ab₂ beyond 30 kDa only give off coreactant-free ECL around +0.82 V. Due to the further enhanced electrosteric effect in sandwich-type immunocomplexes, only the ECL immunosensor with ProGRP as the target can give off coreactant-free ECL around +0.24 V. The electrosterically involved and coreactant-free ECL of CdTe NCs is consequently utilized to sensitively and selectively determine the molecular protein ProGRP, which demonstrates a wide linearity range from 0.1 to 2000 pg/mL and a low limit of detection at 0.05 pg/mL (S/N = 3). This low-triggering-potential and coreactant-free combined ECL platform indicates that engineering the surface of CdTe NCs with a protein can improve the performance of ECL tags in a protein-weight-involved electrosterical way.

BODIPY-Based Multichromophoric Tripodal System as a Multifunctional Material

The strategic design, synthesis, and thorough characterizations of a redox-active BODIPY-based tripodal system (tri-BDP) displaying efficient aggregation-induced emission (AIE), great sensitivity toward the viscosity of a medium, ability for triplet photosensitization, singlet oxygen generation, and photooxidation have been described. The photophysical properties of tri-BDP in various solvents and in the solid state have been extensively investigated. It displayed efficient AIE and green (∼520) emission in acetonitrile/ether mixture and red (∼621 nm) emission in the solid state. Detailed viscosity-dependent studies suggested that it can act as a fluorescent molecular rotor. Triplet photosensitization, singlet oxygen generation, and photooxidation studies in the presence of 1,3-diphenylisobenzofuran and 1,5-dihydroxyl naphthalene suggested its high efficiency toward intersystem crossing and singlet oxygen generation. Detailed electrochemical investigations suggested the redox activity of the system. Hence, this system represents multifunctional features and can be applied as a functional material for various applications.

Microwave-assisted direct synthesis of BODIPY dyes and derivatives

A microwave-assisted one-pot synthesis of BODIPY dyes from pyrroles and acyl chlorides is reported. This protocol features short reaction times, low temperatures, minimum amount of solvent, scalability, versatility, and good yields of the products. These simple, efficient and sustainable conditions can be also applied to the synthesis of derivatives such as BOPHY, BOAHY and BOPAHY.

Accurate Vertical Excitation Energies of BODIPY/Aza-BODIPY Derivatives from Excited-State Mean-Field Calculations

We report a benchmark study of vertical excitation energies and oscillator strengths for the HOMO → LUMO transitions of 17 boron–dipyrromethene (BODIPY) structures, showing a large variety of ring sizes and substituents. Results obtained at the time-dependent density functional theory (TDDFT) and at the delta-self-consistent-field (ΔSCF) by using 13 different exchange correlation kernels (within LDA, GGA, hybrid, and range-separated approximations) are benchmarked against the experimental excitation energies when available. It is found that the time-independent ΔSCF DFT method, when used in combination with hybrid PBE0 and B3LYP functionals, largely outperforms TDDFT and can be quite competitive, in terms of accuracy, with computationally more costly wave function based methods such as CC2 and CASPT2.

Controlling Symmetry Breaking Charge Transfer in BODIPY Pairs

ConspectusSymmetry breaking charge transfer (SBCT) is a process in which a pair of identical chromophores absorb a photon and use its energy to transfer an electron from one chromophore to the other, breaking the symmetry of the chromophore pair. This excited state phenomenon is observed in photosynthetic organisms where it enables efficient formation of separated charges that ultimately catalyze biosynthesis. SBCT has also been proposed as a means for developing photovoltaics and photocatalytic systems that operate with minimal energy loss. It is known that SBCT in both biological and artificial systems is in part made possible by the local environment in which it occurs, which can move to stabilize the asymmetric SBCT state. However, how environmental degrees of freedom act in concert with steric and structural constraints placed on a chromophore pair to dictate its ability to generate long-lived charge pairs via SBCT remain open topics of investigation.In this Account, we compare a broad series of dipyrrin dimers that are linked by distinct bridging groups to discern how the spatial separation and mutual orientation of linked chromophores and the structural flexibility of their linker each impact SBCT efficiency. Across this material set, we observe a general trend that SBCT is accelerated as the spatial separation between dimer chromophores decreases, consistent with the expectation that the electronic coupling between these units varies exponentially with their separation. However, one key observation is that the rate of charge recombination following SBCT was found to slow with decreasing interchromophore separation, rather than speed up. This stems from an enhancement of the dimer's structural rigidity due to increasing steric repulsion as the length of their linker shrinks. This rigidity further inhibits charge recombination in systems where symmetry has already enforced zero HOMO-LUMO overlap. Additionally, for the forward transfer, the active torsion is shown to increase LUMO-LUMO coupling, allowing for faster SBCT within bridging groups.By understanding trends for how rates of SBCT and charge recombination depend on a dimer's internal structure and its environment, we identify design guidelines for creating artificial systems for driving sustained light-induced charge separation. Such systems can find application in solar energy technologies and photocatalytic applications and can serve as a model for light-induced charge separation in biological systems.

Transforming Dyes into Fluorophores: Exciton-Induced Emission with Chain-like Oligo-BODIPY Superstructures

Herein we present a systematic study demonstrating to which extent exciton formation can amplify fluorescence based on a series of ethylene-bridged oligo-BODIPYs. A set of non- and weakly fluorescent BODIPY motifs was selected and transformed into discrete, chain-like oligomers by linkage via a flexible ethylene tether. The prepared superstructures constitute excitonically active entities with non-conjugated, Coulomb-coupled oscillators. The non-radiative deactivation channels of Internal Conversion (IC), also combined with an upstream reductive Photoelectron Transfer (rPET) and Intersystem Crossing (ISC) were addressed at the monomeric state and the evolution of fluorescence and (non-)radiative decay rates studied along the oligomeric series. We demonstrate that a "masked" fluorescence can be fully reactivated irrespective of the imposed conformational rigidity. This work challenges the paradigm that a collective fluorescence enhancement is limited to sterically induced motional restrictions.

New BODIPY Dyes Based on Benzoxazole as Photosensitizers in Radical Polymerization of Acrylate Monomers

A series of 2-phenacylbenzoxazole difluoroboranes named BODIPY dyes (1-8) was designed and applied as photosensitizers (PS) for radical photopolymerization of acrylate monomer. The light absorption within the ultraviolet-visible (UV-Vis) range (λ_max = 350-410 nm; ε_max = 23,000-42,500 M^-1cm^-1), that is strongly influenced by the substituents on the C3 and C4 atoms of phenyl ring, matched the emission of the Omnicure S2000 light within 320-500 nm. The photosensitizer possess fluorescence quantum yield from about 0.005 to 0.99. The 2-phenacylbenzoxazole difluoroboranes, together with borate salt (Bor), iodonium salt (Iod) or pyridinium salt (Pyr) acting as co-initiators, can generate active radicals upon the irradiation with a High Pressure Mercury Lamp which initiates a high-performance UV-Vis light-induced radical polymerization at 320-500 nm. The polymers obtained are characterized by strong photoluminescence. It was found that the type of radical generator (co-initiator) has a significant effect on the kinetic of radical polymerization of acrylate monomer. Moreover, the chemical structure of the BODIPY dyes does not influence the photoinitiating ability of the photoinitiator. The concentration of the photoinitiating system affects the photoinitiating performance. These 2-phenacylbenzoxazole difluoroborane-based photoinitiating systems have promising applications in UV-Vis-light induced polymerization.

Accurate predictions of the electronic excited states of BODIPY based dye sensitizers using spin-component-scaled double-hybrid functionals: a TD-DFT benchmark study

The vertical excitation energies of 13 BODIPY based dye sensitizers are benchmarked by means of TD-DFT, using 36 functionals from different DFT rungs. Most TD-DFT results were found to overestimate the excitation energies, and show mean absolute error (MAE) values in the range 0.2-0.5 eV. The dispersion-corrected, spin-component-scaled, double-hybrid (DSD) functionals DSD-BLYP and DSD-PBEP86 were found to have the smallest MAE values of 0.083 eV and 0.106 eV, respectively, which is close to the range of average errors found in the more expensive coupled-cluster methods. Moreover, DSD-BLYP and DSD-PBEP86 functionals show excellent consistency and quality of results (standard deviation = 0.048 eV and 0.069 eV respectively). However, the range separated hybrid (RSH) and the range separated double hybrid (RSDH) functionals were found to provide the best predictability (linear determination coefficient R 2 > 0.97 eV).

Insights into Electrochemiluminescence Dynamics by Synchronizing Real-Time Electrical, Luminescent, and Mass Spectrometric Measurements

Electrochemiluminescence (ECL) comprises a sophisticated cascade of reactions. Despite advances in mechanistic studies by electrochemistry and spectroscopy, a lack of access to dynamic molecular information renders many plausible ECL pathways unclear or unproven. Here we describe the construction of a real-time ECL mass spectrometry (MS) platform (RT-Triplex) for synchronization of dynamic electrical, luminescent, and mass spectrometric outputs during ECL events. This platform allows immediate and continuous sampling of newly born species at the Pt wire electrode of a capillary electrochemical (EC) microreactor into MS, enabling characterization of short-lived intermediates and the multi-step EC processes. Two ECL pathways of luminol are validated by observing the key intermediates α-hydroxy hydroperoxide and diazaquinone and unraveling their correlation with applied voltage and ECL emission. Moreover, a “catalytic ECL route” of boron dipyrromethene (BODIPY) involving homogeneous oxidation of tri-n-propylamine with the BODIPY radical cation is proposed and verified.

A real-time electrochemiluminescence mass spectrometry platform (RT-Triplex) was developed for revealing ECL mechanisms by synchronization of dynamic electrical, luminescent, and mass spectrometric signals at the electrode–electrolyte interface.

Iodine(III)-promoted regioselective and efficient synthesis of β-triazolyl BODIPYs for the selective recognition of nickel ion and bovine serum albumin

Various ꞵ-triazolyl tethered BODIPYs were efficiently prepared in a sequential one-pot protocol involving the initial reaction of BODIPY with iodobenzene diacetate (IBD) and sodium azide to in situ generate BODIPY...

Coreactant-Free and Direct Electrochemiluminescence from Dual-Stabilizer-Capped InP/ZnS Nanocrystals: A New Route Involving n-Type Luminophore

Electrochemiluminescence (ECL) is conventionally generated in either an annihilation or a coreactant route, and the overwhelming majority of ECL research is conducted in the coreactant route via oxidizing or reducing the coexisting coreactant and luminophore. The coreacant-free ECL generated via merely oxidizing the luminophore would break through the ceiling of coreactant ECL via excluding the detrimental effects of exogenous coreactant and dissolved oxygen. Herein, by exploiting the rich-electron nature of n-type nanocrystals (NCs), coreacant-free ECL is achieved via merely oxidizing 3-mercaptopropionic acid (MPA) and mercaptosuccinic acid (MSA) capped InP/ZnS NCs, i.e., InP/ZnS_MPA-MSA. The electron-rich InP/ZnS_MPA-MSA can be electrochemically injected with holes via two oxidative processes at around +0.75 and +1.37 V (vs Ag/AgCl), respectively, and the exogenous hole can directly combine the conduction band (CB) electron of InP/ZnS_MPA-MSA, resulting in two coreactant-free ECL processes without employing any exogenous coreactant. The deprotonation process for the carboxyl group of the capping agents can provide a negatively charged surface to InP/ZnS_MPA-MSA and enhance the coreactant-free ECL. The hole-injecting process at +1.37 is much stronger than that at +0.75 V and eventually enables an ∼2000-fold enhanced ECL at +1.37 V than that at +0.75 V. The ECL at +1.37 V can be utilized for coreactant-free ECL immunoassay with prostate-specific antigen (PSA) as analyte, which exhibits an acceptable linear response from 5 pg·mL^-1 to 1 ng·mL^-1 with a limit of detection of 0.3 pg·mL^-1. The coreactant-free ECL route would provide an alternative to both annihilation and coreactant routes, simplify the ECL assay procedure and deepening the ECL mechanism investigations.

Dibromo-BODIPY as an Organic Photocatalyst for Radical-Ionic Sequences

A new dibrominated 4,4-difluoro-4-bora-3a,4a-diaza-s-indacene (BODIPY) is reported as a new metal-free photocatalyst. This BODIPY showed similar optoelectronic, electrochemical, and performance properties to those of Ru(bpy)₃Cl₂, one of the most common photocatalysts in a known radical-ionic transformation, such as the formation of 1,4-dicarbonyl compounds. Moreover, additional sequences in which the generated oxonium ion is trapped by an internal nucleophile were developed using this BODIPY photocatalyst. These new sequences allowed the straightforward preparation of γ-alkoxylactones, monoprotected 1,4-ketoaldehydes, and dihydrofurans. This new catalyst, the methodology, and the forged functional groups could be important tools in organic synthesis.

Low-Triggering-Potential Electrochemiluminescence from Surface-Confined CuInS2@ZnS Nanocrystals and their Biosensing Applications

Electrochemiluminescence (ECL) of low triggering potential is strongly anticipated for ECL assays with less inherent electrochemical interference and improved long-term stability of the working electrode. Herein, effects of the thiol capping agents and the states of luminophores, i.e., the thiol-capped CuInS₂@ZnS nanocrystals (CuInS₂@ZnS-Thiol), on the ECL triggering potential of CuInS₂@ZnS-Thiol/N₂H₄·H₂O were explored on the Au working electrode. The thiol capping agent of glutathione (GSH) not only enabled CuInS₂@ZnS-Thiol/N₂H₄·H₂O with the stronger oxidative-reduction ECL than other thiol capping agents but also demonstrated the largest shift for the ECL triggering potential of CuInS₂@ZnS-Thiol/N₂H₄·H₂O upon changing the luminophores from the monodispersed state to the surface-confined state. CuInS₂@ZnS-GSH/N₂H₄·H₂O exhibited an efficient oxidative-reduction ECL around 0.78 V (vs Ag/AgCl) with CuInS₂@ZnS-GSH of the monodispersed state. Upon employing CuInS₂@ZnS-GSH as the ECL tag and immobilizing them onto the Au working electrode, the oxidative-reduction ECL of CuInS₂@ZnS-GSH/N₂H₄·H₂O was lowered to 0.32 V (vs Ag/AgCl), which was about 0.88 V lower than that of traditional Ru(bpy)₃²⁺/TPrA (typically ∼1.2 V, vs Ag/AgCl). The ECL of the CuInS₂@ZnS-GSH/N₂H₄·H₂O system with the luminophore of both monodispersed and surface-confined states was spectrally identical to each other, indicating that this surface-confining strategy exhibited negligible effect on the excited state for the ECL of CuInS₂@ZnS-GSH. A surface-confined ECL sensor around 0.32 V was fabricated with CuInS₂@ZnS-GSH as a luminophore, which could sensitively and selectively determine the K-RAS gene from 1 to 500 pM with a limit of detection at 0.5 pmol L^-1 (S/N = 3).

Rational Design of Electrochemiluminescent Devices

Electrochemiluminescence (ECL) is a light-emitting process which combines the intriguing merits of both electrochemical and chemiluminescent methods. It is an extensively used method especially in clinical analysis and biological research due to its high sensitivity, wide dynamic range, and good reliability. ECL devices are critical for the development and applications of ECL. Much effort has been expended to improve the sensitivity, portability, affordability, and throughput of new ECL devices, which allow ECL to adapt broad usage scenarios.In this Account, we summarize our efforts on the recent development of ECL devices including new electrodes, ECL devices based on a wireless power transfer (WPT) technique, and novel bipolar electrochemistry. As the essential components in the ECL devices, electrodes play an important role in ECL detection. We have significantly improved the sensitivity of luminol ECL detection of H₂O₂ by using a stainless steel electrode. By using semiconductor materials (e.g., silicon and BiVO₄), we have exploited photoinduced ECL to generate intense emission at much lower potentials upon illumination. For convenience, portability, and disposability, ECL devices based on cheap WPT devices have been designed. A small diode has been employed to rectify alternating current into direct current to dramatically enhance ECL intensity, enabling sensitive ECL detection using a smart phone as a detector. Finally, we have developed several ECL devices based on bipolar electrochemistry in view of the convenience of multiplex ECL sensing using a bipolar electrode (BPE). On the basis of the wireless feature of BPE, we have employed movable BPEs (e.g., BPE swimmers and magnetic rotating BPE) for deep exploration of the motional and ECL properties of dynamic BPE systems. To make full use of the ECL solution, we have dispersed numerous micro-/nano-BPEs in solution to produce intense 3D ECL in the entire solution, instead of 2D ECL in conventional ECL devices. In addition, the interference of ECL noise from driving electrodes was minimized by introducing the stainless steel with a passivation layer as the driving electrode. To eliminate the need for the fabrication of electrode arrays and the interference from the driving electrode and to decrease the applied voltage, we develop a new-type BPE device consisting of a single-electrode electrochemical system (SEES) based on a resistance-induced potential difference. The SEES is fabricated easily by attaching a multiperforated plate to a single film electrode. It enables the simultaneous detection of many samples and analytes using only a single film electrode (e.g., screen-printed electrode) instead of electrode arrays. It is of great potential in clinical analysis especially for multiple-biomarker detection, drug screening, and biological studies. Looking forward, we believe that more ECL devices and related ECL materials and detection methods will be developed for a wide range of applications, such as in vitro diagnosis, point-of-care testing, high-throughput analysis, drug screening, biological study, and mechanism investigation.

Quantitative Structure-Property Relationship Modelling for the Prediction of Singlet Oxygen Generation by Heavy-Atom-Free BODIPY Photosensitizers*

Heavy-atom-free sensitizers forming long-living triplet excited states via the spin-orbit charge transfer intersystem crossing (SOCT-ISC) process have recently attracted attention due to their potential to replace costly transition metal complexes in photonic applications. The efficiency of SOCT-ISC in BODIPY donor-acceptor dyads, so far the most thoroughly investigated class of such sensitizers, can be finely tuned by structural modification. However, predicting the triplet state yields and reactive oxygen species (ROS) generation quantum yields for such compounds in a particular solvent is still very challenging due to a lack of established quantitative structure-property relationship (QSPR) models. In this work, the available data on singlet oxygen generation quantum yields (ΦΔ ) for a dataset containing >70 heavy-atom-free BODIPY in three different solvents (toluene, acetonitrile, and tetrahydrofuran) were analyzed. In order to build reliable QSPR model, a series of new BODIPYs were synthesized that bear different electron donating aryl groups in the meso position, their optical and structural properties were studied along with the solvent dependence of singlet oxygen generation, which confirmed the formation of triplet states via the SOCT-ISC mechanism. For the combined dataset of BODIPY structures, a total of more than 5000 quantum-chemical descriptors was calculated including quantum-chemical descriptors using density functional theory (DFT), namely M06-2X functional. QSPR models predicting ΦΔ values were developed using multiple linear regression (MLR), which perform significantly better than other machine learning methods and show sufficient statistical parameters (R=0.88-0.91 and q2 =0.62-0.69) for all three solvents. A small root mean squared error of 8.2 % was obtained for ΦΔ values predicted using MLR model in toluene. As a result, we proved that QSPR and machine learning techniques can be useful for predicting ΦΔ values in different media and virtual screening of new heavy-atom-free BODIPYs with improved photosensitizing ability.

Lighting up the Electrochemiluminescence of Carbon Dots through Pre- and Post-Synthetic Design

Carbon dots (CDs), defined by their size of less than 10 nm, are a class of photoluminescent (PL) and electrochemiluminescent (ECL) nanomaterials that include a variety of carbon-based nanoparticles. However, the control of their properties, especially ECL, remains elusive and afflicted by a series of problems. Here, the authors report CDs that display ECL in water via coreactant ECL, which is the dominant mechanism in biosensing applications. They take advantage of a multicomponent bottom-up approach for preparing and studying the luminescence properties of CDs doped with a dye acting as PL and ECL probe. The dependence of luminescence properties on the surface chemistry is further reported, by investigating the PL and ECL response of CDs with surfaces rich in primary, methylated, or propylated amino groups. While precursors that contribute to the core characterize the PL emission, the surface states influence the efficiency of the excitation-dependent PL emission. The ECL emission is influenced by surface states from the organic shell, but states of the core strongly interact with the surface, influencing the ECL efficiency. These findings offer a framework of pre- and post-synthetic design strategies to improve ECL emission properties, opening new opportunities for exploring biosensing applications of CDs.

Fluorescence from 3,5-diphenyl-8-CF3-BODIPYs with amino substituents on the phenyl rings: Quenching by aromatic molecules

The photoluminescence from n-hexane solutions of the dyes obtained by the introduction of amino groups into the meta position of the phenyl rings of 3,5-diphenyl-8-CF₃-BODIPY was found to be strongly quenched by some aromatic molecules (benzene and toluene). On the contrary, the introduction of an amino group into the para position does not lead to significant quenching. The quenching of photoluminescence from the meta derivatives obeys the mixed static + dynamic mechanism. Temperature-dependent time-resolved fluorescence measurements were performed to determine the Stern-Volmer constants of the static and dynamic components of quenching. It follows from these data that the binding energy between luminophore and toluene molecules is about 5.0 kcal/mol in the ground state and larger than 3.4 kcal/mol in the excited state. Complexation with toluene facilitates the intramolecular charge transfer in the BODIPY derivatives with the meta position of the amino groups, resulting in photoluminescence quenching.

Synthesis and photolysis of new BODIPY derivatives with chelated boron centre

New borondipyromethene (BODIPY) derivatives chelated at the boron centre with different catecholate and salicylate ligands were synthesized via substituting the fluoride atoms with the aid of aluminum chloride that activates the boron-fluoride bond for substitution. The photophysical properties of the novel BODIPYs were investigated by normalized UV-vis absorption as well as the fluorescence emission spectra. Moreover, the fluorescence quantum yields of the chelated BODIPYs were also calculated and the ultraviolet irradiation of the salicylate derivatives was studied.

Design of BODIPY dyes as triplet photosensitizers: electronic properties tailored for solar energy conversion, photoredox catalysis and photodynamic therapy

BODIPYs are renowned fluorescent dyes with strong and tunable absorption in the visible region, high thermal and photo-stability and exceptional fluorescence quantum yields. Transition metal complexes are the most commonly used triplet photosensitisers, but, recently, the use of organic dyes has emerged as a viable and more sustainable alternative. By proper design, BODIPY dyes have been turned from highly fluorescent labels into efficient triplet photosensitizers with strong absorption in the visible region (from green to orange). In this perspective, we report three design strategies: (i) halogenation of the dye skeleton, (ii) donor-acceptor dyads and (iii) BODIPY dimers. We compare pros and cons of these approaches in terms of optical and electrochemical properties and synthetic viability. The potential applications of these systems span from energy conversion to medicine and key examples are presented.

Progress in electrochemiluminescence of nanoclusters: how to improve the quantum yield of nanoclusters

Classification of nanoclusters and methods to improve their quantum yield and applications.

Atomic Precision Graphene Model Compound for Bright Electrochemiluminescence and Organic Light-Emitting Diodes

An N-annulated perylene diimide dimer, tPDI₂N-hex, a graphene model compound with atomic precision, was investigated for luminescence applications. Electrochemiluminescence (ECL) of tPDI₂N-hex was studied with tri-n-propylamine (TPrA) as a reducing coreactant. ECL-voltage curves along with spooling ECL spectra provided details of light generation mechanisms. The relative ECL quantum efficiency of the Ru(bpy)₃(PF₆)₂/TPrA system was calculated to be 64%, which is superior to that of many other organic molecules because of the desired excited state in the absence of surface states. An organic light-emitting diode (OLED) fabricated with tPDI₂N-hex displayed bright orange-red emission with a low color temperature, which is very desirable. It is plausible that the sterically constrained and thus orthogonal aromatic moieties in the tPDI₂N-hex structure, with atomic precision graphene layer characteristics, lead to the excellent luminescence performances. The ECL and OLED studies of tPDI₂N-hex showcase great application potentials of tPDI₂N-hex in both solution-based ECL probes and solid-state light devices.

Synthesis and Functions of Oligomeric and Multidentate Dipyrrin Derivatives and their Complexes

The dipyrrin–metal complexes and especially the boron complex 4,4-difluoro-4-bora-3a,4a-diaza-s-indacene (BODIPY) have recently attracted considerable attention because of their interesting properties and possible applications. We have developed two unique and useful ways to extend versatility and usefulness of the dipyrrin complexes. The first one is the linear and macrocyclic oligomerization of the BODIPY units. These arrangements of the B–F moieties of the oligomerized BODIPY units provide sophisticated functions, such as unique recognition ability toward cationic guest, associated with changes in the photophysical properties by utilizing unprecedented interactions between the B–F and a cationic species. The second one is introduction of additional ligating moieties into the dipyrrin skeleton. The multidentate N2Ox dipyrrin ligands thus obtained form a variety of complexes with 13 and 14 group elements, which are difficult to synthesize using the original N2 dipyrrin derivatives. Interestingly, these unique complexes exhibit novel structures, properties, and functions such as guest recognition, stimuli-responsive structural conversion, switching of the optical properties, excellent stability of the neutral radicals, etc. We believe that these multifunctional dipyrrin complexes will advance the basic chemistry of the dipyrrin complexes and develop their applications in the materials and medicinal chemistry fields.

1 Introduction

2 Linear Oligomers of Boron–Dipyrrin Complexes

3 Cyclic Oligomers of Boron–Dipyrrin Complexes

4 A Cyclic Oligomer of Zinc–Dipyrrin Complexes

5 Group 13 Element Complexes of N2Ox Dipyrrins

6 Chiral N2 and N2Ox Dipyrrin Complexes

7 Group 14 Element Complexes of N2O2 Dipyrrins

8 Other N2O2 Dipyrrin Complexes with Unique Properties and Functions

9 Conclusion

A ratiometric electrochemiluminescence resonance energy transfer platform based on novel dye BODIPY derivatives for sensitive detection of lactoferrin

A ratiometric electrochemiluminescence resonance energy transfer (ECL-RET) platform depended on novel dye BODIPY derivatives was proposed for rapid detection of lactoferrin. This ECL-RET platform is composed of aptamer decorated BODIPY composites and C₆₀@BSA, in which BODIPY derivative is the ECL probe and can generate significant resonance energy transfer with K₂S₂O₈. BODIPY derivative and K₂S₂O₈ are used as built-in reference signal and calibration signal respectively to eliminate background signal and abnormal change signal by double signal self-calibration process. At the same time, C₆₀, as the accelerator of K₂S₂O₈, can effectively increase the ECL signal and further transfer as much energy as possible to BODIPY derivative. Under optimal conditions, the constructed ECL-RET platform exhibited sensitive detection of lactoferrin in the wide linear range of 10^-4- 850 ng/mL with a LOD of 42 fg/mL. Meanwhile, the proposed ECL-RET aptasensor demonstrated superior stability, specificity and reproducibility, displaying favorable application value in practical diagnosis of this method.

Optical limiting properties of D-π-A BODIPY dyes in the presence and absence of methyl groups at the 1,7-positions

The optical limiting properties of three meso-pentafluorophenylstyrylBODIPY dyes are investigated in the presence and absence of methyl groups at the 1,7-positions that hinder free rotation of the meso-aryl group. Pentafluorophenyl groups are introduced at the meso-position, while 4-diethylaminostyryl groups are introduced at the 3- and/or 5-positions to form dyes with strong donor-[Formula: see text]-acceptor (D-[Formula: see text]-A) properties to enhance the dipole moment of the molecule. Favorable optical limiting properties are obtained for all three dyes, with the highest second-order hyperpolarizability value obtained for a monostyryl dye with no methyl groups at the 1,7-position. Bromination at the 2,6-positions of a 1,7-methyl substituted dye is found to result in second-order hyperpolarizability that is an order of magnitude lower than that calculated for the analogous non-halogenated dye.

FRET-based intracellular investigation of nanoprodrugs toward highly efficient anticancer drug delivery

In order to overcome unpredictable side-effects and increased cytotoxicity of conventional carrier-based anticancer drug delivery systems, several systems that consist exclusively of the pure drug (or prodrug) have been proposed. The behavior and dynamics of these systems after entering cancer cells are, however, still unknown, hindering their progress towards in vivo and clinical applications. Here, we report a comprehensive in cellulo study of carrier-free SN-38 nanoprodrugs (NPDs), previously developed by our group. The work shows the intracellular uptake, localization, and degradation of the NPDs via FRET microscopy. Accordingly, new FRET-NPDs were chemically synthesized and characterized. Prodrug to drug conversion and therapeutic efficiency were also validated. Our work provides crucial information for the application of NPDs as drug delivery systems and demonstrates their outstanding potential as next-generation anticancer nanomedicines.

Electrochemiluminescent detection of glucose in human serum by BODIPY-based chemodosimeters for hydrogen peroxide using accelerated self-immolation of boronates

BODIPY-based ECL chemodosimeters were developed for the detection of hydrogen peroxide. The reactivity of boronate towards hydrogen peroxide was enhanced by adjacent fluorine atoms. In combination with glucose oxidase, a fluorine-substituted probe successfully quantified the glucose level in human serum, providing its potential as a versatile tool in point-of-care testing applications.