The structural chemistry of metallocorroles: combined X-ray crystallography and quantum chemistry studies afford unique insights

Probing photoinduced electron transfer events in phenylferrocene-corrole dyad

Herein, we investigated PhFC (10-phenylferrocenyl-5,15-diphenyl corrole), a corrole-based donor-acceptor (D-A) dyad, to understand the energy/electron transfer reaction dynamics. Phenylferrocene acts as the donor moiety when attached to the meso position of the corrole ring in the PhFC D-A system. The photophysical properties of the PhFC dyad and its parent molecule, TPC (5,10,15-triphenyl corrole), were studied by UV-vis spectroscopy, steady state fluorescence spectroscopy, TCSPC and optical microscopy techniques. A slight red shift and broadening of both the Q-band and Soret bands are observed in the absorption spectra of the PhFC dyad in comparison to TPC, representing the weak electronic interaction between the phenylferrocene moiety and corrole ring. The fluorescence emission spectrum of the PhFC dyad is significantly quenched (>80%) in comparison to TPC, attributed to the photoinduced electron transfer (PET) from phenylferrocene to the corrole ring. We observed that the electron transfer rate in the PhFC system is solvent dependent. Our theoretical investigation supported the experimental findings on the electron transfer mechanism. The HOMO and LUMO arrangements of these PhFC dyads demonstrate the electron density distribution and the ability of the donor moieties to transfer electrons to the corrole moiety. Fluorescence lifetime imaging microscopy (FLIM) was used to image the homogeneous lifetime distribution of the PhFC dyad and TPC.

Structurally influenced optical nonlinearities and ultrafast dynamics in β-acroleyl- and β-dicyanobutadienyl-appended cobalt corroles

The strong two-photon induced nonlinear absorption and self-focusing type positive nonlinear refraction are pronounced by the structural engineering in β-functionalized cobalt corroles.

Molecular Geometry and Electronic Structure of Copper Corroles

Copper corroles are known for their unique multiconfigurational electronic structures in the ground state, which arise from the transfer of electrons from the π orbitals of the corrole to the d-orbital of copper. While density functional theory (DFT) provides reasonably good molecular geometries, the determination of the ground spin state and the associated energetics is heavily influenced by functional choice, particularly the percentage of the Hartree-Fock exchange. Using extended multireference perturbation theory methods (XMS-CASPT2), the functional choice can be assessed. The molecular geometries and electronic structures of both the unsubstituted and the meso-triphenyl copper corroles were investigated. A minimal active space was employed for structural characterization, while larger active spaces are required to examine the electronic structure. The XMS-CASPT2 investigations conclusively identify the ground electronic state as a multiconfigurational singlet (S0) with three dominant electronic configurations in its lowest energy and characteristic saddled structure. In contrast, the planar geometry corresponds to the triplet state (T0), which is approximately 5 kcal/mol higher in energy compared to the S0 state for both the bare and substituted copper corroles. Notably, the planarity of the T0 geometry is reduced in the substituted corrole compared with that in the unsubstituted one. By analyzing the potential energy surface (PES) between the S0 and T0 geometries using XMS-CASPT2, the multiconfigurational electronic structure is shown to transition toward a single electron configuration as the saddling angle decreases (i.e., as one approaches the planar geometry). Despite the ability of the functionals to reproduce the minimum energy structures, only the TPSSh-D3 PES is reasonably close to the XMS-CASPT2 surface. Significant deviations along the PES are observed with other functionals.

Organometallic Chemistry within the Structured Environment Provided by the Macrocyclic Cores of Carbaporphyrins and Related Systems

The unique environment within the core of carbaporphyrinoid systems provides a platform to explore unusual organometallic chemistry. The ability of these structures to form stable organometallic derivatives was first demonstrated for N-confused porphyrins but many other carbaporphyrin-type systems were subsequently shown to exhibit similar or complementary properties. Metalation commonly occurs with catalytically active transition metal cations and the resulting derivatives exhibit widely different physical, chemical and spectroscopic properties and range from strongly aromatic to nonaromatic and antiaromatic species. Metalation may trigger unusual, highly selective, oxidation reactions. Alkyl group migration has been observed within the cavity of metalated carbaporphyrins, and in some cases ring contraction of the carbocyclic subunit takes place. Over the past thirty years, studies in this area have led to multiple synthetic routes to carbaporphyrinoid ligands and remarkable organometallic chemistry has been reported. An overview of this important area is presented.

Ag(III)···Ag(III) Argentophilic Interaction in a Cofacial Corrole Dyad

Metallophilic interactions between closed-shell metal centers are exemplified by d¹⁰ ions, with Au(I) aurophilic interactions as the archetype. Such an interaction extends to d⁸ species, and examples involving Au(III) are prevalent. Conversely, Ag(III) argentophilic interactions are uncommon. Here, we identify argentophilic interactions in silver corroles, which are authentic Ag(III) species. The crystal structure of a monomeric silver corrole is a dimer in the solid state, and the macrocycle exhibits an atypical domed conformation. In order to evaluate whether this represents an authentic metallophilic interaction or a crystal-packing artifact, the analogous cofacial or "pacman" corrole was prepared. The conformation of the monomer was recapitulated in the silver pacman corrole, exhibiting a short 3.67 Å distance between metal centers and a significant compression of the xanthene backbone. Theoretical calculations support the presence of a rare Ag(III)···Ag(III) argentophilic interaction in the pacman complex.

Phenol- and resorcinol-appended metallocorroles and their derivatization with fluorous tags

Boron tribromide-mediated demethylation of rhenium-oxo and gold meso-tris(4-methoxyphenyl)corrole and meso-tris(3,5-dimethoxyphenylcorrole), M[TpOMePC] and M[T(3,5-OMe)PC] (M = ReO, Au), have yielded the corresponding phenol- and resorcinol-appended metallocorroles, M[TpOHPC] and M[T(3,5-OH)PC], in good yields. The latter compounds proved insoluble in dichloromethane and chloroform but soluble in THF. The M[T(3,5-OH)PC] derivatives also proved moderately soluble in 0.05 M aqueous KOH. Unlike oxidation-prone aminophenyl-substituted corroles, the phenol- and resorcinol-appended metallocorroles could be readily handled in air without special precautions. The phenolic metallocorroles could be readily alkylated with 4,4,5,5,6,6,7,7,8,8,9,9,10,10,11,11,11-heptadecafluoroundecyl iodide ("FtI") to afford the fluorous-tagged metallocorroles M[TpOFtPC] and M[T(3,5-OFt)PC] in > 90% yields. The simplicity of the synthetic protocols promise a wide range of phenolic and fluorous-tagged porphyrin analogues with potential applications to diverse fields such as sensors, catalysis, and photodynamic therapy, among others.

A DMRG/CASPT2 Investigation of Metallocorroles: Quantifying Ligand Noninnocence in Archetypal 3d and 4d Element Derivatives

Hybrid density functional theory (B3LYP) and density matrix renormalization group (DMRG) theory have been used to quantitatively compare the degree of ligand noninnocence (corrole radical character) in seven archetypal metallocorroles. The seven complexes, in decreasing order of corrole noninnocent character, are Mn[Cor]Cl > Fe[Cor]Cl > Fe[Cor](NO) > Mo[Cor]Cl2 > Ru[Cor](NO) ≈ Mn[Cor]Ph ≈ Fe[Cor]Ph ≈ 0, where [Cor] refers to the unsubstituted corrolato ligand. DMRG-based second-order perturbation theory calculations have also yielded detailed excited-state energetics data on the compounds, shedding light on periodic trends involving middle transition elements. Thus, whereas the ground state of Fe[Cor](NO) (S = 0) is best described as a locally S = 1/2 {FeNO}7 unit antiferromagnetically coupled to a corrole A' radical, the calculations confirm that Ru[Cor](NO) may be described as simply {RuNO}6-Cor3-, that is, having an innocent corrole macrocycle. Furthermore, whereas the ferromagnetically coupled S = 1{FeNO}7-Cor•2- state of Fe[Cor](NO) is only ∼17.5 kcal/mol higher than the S = 0 ground state, the analogous triplet state of Ru[Cor](NO) is higher by a far larger margin (37.4 kcal/mol) relative to the ground state. In the same vein, Mo[Cor]Cl2 exhibits an adiabatic doublet-quartet gap of 36.1 kcal/mol. The large energy gaps associated with metal-ligand spin coupling in Ru[Cor](NO) and Mo[Cor]Cl2 reflect the much greater covalent character of 4d-π interactions relative to analogous interactions involving 3d orbitals. As far as excited-state energetics is concerned, DMRG-CASPT2 calculations provide moderate validation for hybrid density functional theory (B3LYP) for qualitative purposes, but underscore the possibility of large errors (>10 kcal/mol) in interstate energy differences.

Recent Strategies to Develop Innovative Photosensitizers for Enhanced Photodynamic Therapy

This review presents a robust strategy to design photosensitizers (PSs) for various species. Photodynamic therapy (PDT) is a photochemical-based treatment approach that involves the use of light combined with a light-activated chemical, referred to as a PS. Attractively, PDT is one of the alternatives to conventional cancer treatment due to its noninvasive nature, high cure rates, and low side effects. PSs play an important factor in photoinduced reactive oxygen species (ROS) generation. Although the concept of photosensitizer-based photodynamic therapy has been widely adopted for clinical trials and bioimaging, until now, to our surprise, there has been no relevant review article on rational designs of organic PSs for PDT. Furthermore, most of published review articles in PDT focused on nanomaterials and nanotechnology based on traditional PSs. Therefore, this review aimed at reporting recent strategies to develop innovative organic photosensitizers for enhanced photodynamic therapy, with each example described in detail instead of providing only a general overview, as is typically done in previous reviews of PDT, to provide intuitive, vivid, and specific insights to the readers.

MCD and MCPL Characterization of Luminescent Si(IV) and P(V) Tritolylcorroles: The Role of Coordination Number

Two triarylcorrole complexes, (hydroxy)[5,10,15-tritolylcorrolato]silicon-(TTC)Si(OH) and (dihydroxy)[5,10,15-tritolylcorrolato]phosphorous-(TTC)P(OH) ₂ , have been investigated by magnetic circular dichroism (MCD) and magnetic circularly polarized luminescence (MCPL). The spectroscopic investigations have been combined with explicit calculation of MCD response through time-dependent density functional theory (TD-DFT) formalism. This has allowed us to better define the role of molecular orbitals in the transitions associated with the Soret and Q bands. Besides and more importantly, MCD has made it possible to follow the titration process of (TTC)Si(OH) in dimethyl sulfoxide (DMSO) solution with NaF and of (TTC)P(OH) ₂ in dichloromethane solution with alcohols in a complementary and, we dare say, more sensitive way with respect to absorption and fluorescence data. Finally, the MCPL spectra and the ancillary TD-DFT calculations have allowed us to characterize the excited state of (TTC)Si(OH).

Heavy-element-ligand covalence: ligand noninnocence in molybdenum and tungsten Viking-helmet Corroles

Extensive DFT calculations with several exchange-correlation functionals indicate that molybdenum-dichlorido Viking helmet corroles are noninnocent with significant Mo^IV-corrole˙^2- character. The effect is mediated by a Mo(4d)-corrole(π) orbital interaction similar to that postulated for MnCl, FeCl and FeNO corroles. The effect also appears to operate in tungsten-dichlorido corroles but is weaker relative to that for Mo. In contrast, MoO triarylcorroles do not exhibit a significant degree of corrole radical character. Furthermore, the Soret absorption maxima of a series of MoCl₂ tris(para-X-phenyl)corrole derivatives were found to redshift dramatically with increasing electron-donating character of the para substituent X, essentially clinching the case for a noninnocent macrocycle in MoCl₂ corroles.

PorphyStruct: A Digital Tool for the Quantitative Assignment of Non-Planar Distortion Modes in Four-Membered Porphyrinoids

PorphyStruct, a new digital tool for the analysis of non‐planar distortion modes of different porphyrinoids, and its application to corrole structures is reported. The program makes use of the normal‐coordinate structure decomposition technique (NSD) and employs sets of normal modes equivalent to those established for porphyrins in order to describe the out‐of‐plane dislocation pattern of perimeter atoms from corroles, norcorroles, porphycenes and other porphyrinoids quantitatively and in analogy to the established terminology. A comparative study of 17 porphyrin structures shows very similar results to the original NSD analysis and no systematic error. Application to corroles is successful and reveals the necessity to implement an extended basis of normal modes for a large share of experimental structures. The results frequently show the concomitant occurence of several modes but remain interpretable. For group XI metal corroles the phenomenon of supersaddling was unravelled, allowing for more in‐depths discussions of structure‐function correlations.

The Story of 5d Metallocorroles: From Metal-Ligand Misfits to New Building Blocks for Cancer Phototherapeutics

Porphyrin chemistry is Shakespearean: over a century of study has not withered the field’s apparently infinite variety. Heme proteins continually astonish us with novel molecular mechanisms, while new porphyrin analogues bowl us over with unprecedented optical, electronic, and metal-binding properties. Within the latter domain, corroles occupy a special place, exhibiting a unique and rich coordination chemistry. The 5d metallocorroles are arguably the icing on that cake.

New Zealand chemist Penny Brothers has used the word “misfit” to describe the interactions of boron, a small atom with a predilection for tetrahedral coordination, and porphyrins, classic square-planar ligands. Steve Jobs lionized misfits as those who see things differently and push humanity forward. Both perspectives have inspired us. The 5d metallocorroles are misfits in that they encapsulate a large 5d transition metal ion within the tight cavity of a contracted porphyrin ligand.

Given the steric mismatch inherent in their structures, the syntheses of some 5d metallocorroles are understandably capricious, proceeding under highly specific conditions and affording poor yields. Three broad approaches may be distinguished.

(a) In the metal–alkyl approach, a free-base corrole is exposed to an alkyllithium and the resulting lithio-corrole is treated with an early transition metal chloride; a variant of the method eschews alkyllithium and deploys a transition metal–alkyl instead, resulting in elimination of the alkyl group as an alkane and insertion of the metal into the corrole. This approach is useful for inserting transition metals from groups 4, 5, and, to some extent, 6, as well as lanthanides and actinides.

(b) In our laboratory, we have often deployed a low-valent organometallic approach for the middle transition elements (groups 6, 7, 8, and 9). The reagents are low-valent metal–carbonyl or −olefin complexes, which lose one or more carbon ligands at high temperature, affording coordinatively unsaturated, sticky metal fragments that are trapped by the corrole nitrogens.

(c) Finally, a metal acetate approach provides the method of choice for gold and platinum insertion (groups 10 and 11).

This Account provides a first-hand perspective of the three approaches, focusing on the last two, which were largely developed in our laboratory. In general, the products were characterized with X-ray crystallography, electrochemistry, and a variety of spectroscopic methods. The physicochemical data, supplemented by relativistic DFT calculations, have provided fascinating insights into periodic trends and relativistic effects.

An unexpected feature of many 5d metallocorroles, given their misfit character, is their remarkable stability under thermal, chemical, and photochemical stimulation. Many of them also exhibit long triplet lifetimes on the order of 100 μs and effectively sensitize singlet oxygen formation. Many exhibit phosphorescence in the near-infrared under ambient conditions. Furthermore, water-soluble ReO and Au corroles exhibit impressive photocytotoxicity against multiple cancer cell lines, promising potential applications as cancer phototherapeutics. We thus envision a bright future for the compounds as rugged building blocks for new generations of therapeutic and diagnostic (theranostic) agents.

Minding our P-block and Q-bands: paving inroads into main group corrole research to help instil broader potential

Main group chemistry is often considered less "dynamic" than transition metal (TM) chemistry because of predictable VSEPR-based central atom geometries, relatively slower redox switching and lack of electronic d-d transitions. However, we delineate what has been made possible with main group chemistry to give it its proper due and up-to-date treatment. The huge untapped potential regarding photophysical properties and functioning hereby spurred us to review a range of corrole reports addressing primarily photophysical trends, synthetic aspects, and important guidelines regarding substitution and inorganic principles. We also look at Ag and Au systems and also consider substitutions such as CF3, halogens, additives and also counterions. Throughout, as well as at the end of this review, we suggest various future directions; further future industrial catalytic and health science research is encouraged.

Synthesis and molecular structure of perhalogenated rhenium-oxo corroles

As part of our efforts to develop rhenium-oxo corroles as photosensitizers for oxygen sensing and photodynamic therapy, we investigated the potential β-perhalogenation of five ReO meso-tris(para-X-phenyl)corroles, Re[TpXPC](O) (X = CF3, H, F, CH3, and OCH3), with elemental chlorine and bromine. With Cl2, β-octachlorinated products Re[Cl8TpXPC](O) were rapidly obtained for X = CF3, H, and CH3, but X = OCH3 resulted in overchlorination on the meso-aryl groups. Full β-octabromination proved slower relative to Cu and Ir corroles, but the desired Re[Br8TpXPC](O) products were finally obtained for X = H and F after a week at room temperature. For X = CH3 and OCH3, these conditions led to undecabrominated products Re[Br11TpXPC](O). Compared to the β-unsubstituted starting materials, the β-octahalogenated products were found to exhibit sharp 1H NMR signals at room temperature, indicating that the aryl groups are locked in place by the β-halogens, and substantially redshifted Soret and Q bands. Single-crystal X-ray structures of Re[Cl8TpCF3PC](O), Re[Cl8TpCH3PC](O), and Re[Br8TpFPC](O) revealed mild saddling for one Cl8 structure and the Br8 structure. These structural variations, however, appear too insignificant to explain the slowness of the β-octabromination protocols, which seems best attributed to the deactivating influence of the high-valent Re center.

Molecular Structure of Copper and μ-Oxodiiron Octafluorocorrole Derivatives: Insights into Ligand Noninnocence

Single-crystal X-ray structures were obtained for the copper and μ-oxodiiron complexes of 2,3,7,8,12,13,17,18-octafluoro-5,10,15-triphenylcorrole, hereafter denoted as Cu[F₈TPC] and {Fe[F₈TPC]}₂O. A comparison with the crystal structures of other undecasubstituted Cu corroles, including those with H, Ar, Br, I, and CF₃ as β-substituents, showed that the degree of saddling increases in the order: H ≲ F < Ar ≲ Br ≲ I < CF₃. In other words, Cu[F₈TPC] is marginally more saddled than β-unsubstituted Cu triarylcorroles, but substantially less saddled than Cu undecaarylcorroles, β-octabromo-meso-triarylcorroles, and β-octaiodo-meso-triarylcorroles, and far less saddled than Cu β-octakis(trifluoromethyl)-meso-triarylcorroles. As for {Fe[F₈TPC]}₂O, the moderate quality of the structure did not allow us to draw firm conclusions in regard to bond length alternations in the corrole skeleton and hence also the question of ligand noninnocence. The Fe-O bond distances, 1.712(8) and 1.724(8), however, are essentially identical to those observed for {Fe[TPFPC]}₂O, where TPFPC^3- is the trianion of 5,10,15-tris(pentafluorophenyl)corrole, suggesting that a partially noninnocent electronic structural description may be applicable for both compounds.

5,10,15-Triarylcorrole atropisomerism

A series of 5,10,15-triarylcorroles has been prepared, with the meso-aryl rings functionalized with different substituents to investigate their influence on the aryl ring rotation with respect to the corrole plane. The study has been carried out by different NMR techniques, allowing the complete assignment of the 1H NMR spectra and giving insights on the kinetic and thermodynamic factors driving the atropisomerism in triarylcorrole derivatives.

Advanced Paramagnetic Resonance Studies on Manganese and Iron Corroles with a Formal d4 Electron Count

Metallocorroles wherein the metal ion is Mn^III and formally Fe^IV are studied here using field- and frequency-domain electron paramagnetic resonance techniques. The Mn^III corrole, Mn(tpfc) (tpfc = 5,10,15-tris(pentafluorophenyl)corrole trianion), exhibits the following S = 2 zero-field splitting (zfs) parameters: D = -2.67(1) cm^-1, |E| = 0.023(5) cm^-1. This result and those for other Mn^III tetrapyrroles indicate that when D ≈ - 2.5 ± 0.5 cm^-1 for 4- or 5-coordinate and D ≈ - 3.5 ± 0.5 cm^-1 for 6-coordinate complexes, the ground state description is [Mn^III(Cor^3-)]⁰ or [Mn^III(P^2-)]⁺ (Cor = corrole, P = porphyrin). The situation for formally Fe^IV corroles is more complicated, and it has been shown that for Fe(Cor)X, when X = Ph (phenyl), the ground state is a spin triplet best described by [Fe^IV(Cor^3-)]⁺, but when X = halide, the ground state corresponds to [Fe^III(Cor^•2-)]⁺, wherein an intermediate spin (S = ³/₂) Fe^III is antiferromagnetically coupled to a corrole radical dianion (S = ¹/₂) to also give an S = 1 ground state. These two valence isomers can be distinguished by their zfs parameters, as determined here for Fe(tpc)X, X = Ph, Cl (tpc = 5,10,15-triphenylcorrole trianion). The complex with axial phenyl gives D = 21.1(2) cm^-1, while that with axial chloride gives D = 14.6(1) cm^-1. The D value for Fe(tpc)Ph is in rough agreement with the range of values reported for other Fe^IV complexes. In contrast, the D value for Fe(tpc)Cl is inconsistent with an Fe^IV description and represents a different type of iron center. Computational studies corroborate the zfs for the two types of iron corrole complexes. Thus, the zfs of metallocorroles can be diagnostic as to the electronic structure of a formally high oxidation state metallocorrole, and by extension to metalloporphyrins, although such studies have yet to be performed.

Gold dipyrrin-bisphenolates: a combined experimental and DFT study of metal–ligand interactions

Given that noninnocent and metalloradical-type electronic structures are ubiquitous among dipyrrin-bisphenolate (DPP) complexes, we synthesized the gold(iii) derivatives as potentially innocent paradigms against which the properties of other metallo-DPP derivatives can be evaluated. Electronic absorption spectra, electrochemical studies, a single-crystal X-ray structure, and DFT calculations all suggest that the ground states of the new complexes indeed correspond to an innocent Au^III–DPP³⁻, paralleling a similar description noted for Au corroles. Interestingly, while DFT calculations indicate purely ligand-centered oxidations, reduction of AuDPP is predicted to occur across both the metal and the ligand.

The first gold dipyrrin-bisphenolates have been synthesized. Like their corrole analogues, they exhibit Au^III–L³⁻ ground states, providing rare innocent paradigms for a class of complexes that commonly occur as metalloradicals.

Ruffling and doming: Structural and redox studies on meso-aryl and β-alkyl chromyl(V)corroles

Chromyl(V) complexes of eleven different meso-aryl- and [Formula: see text]-alkylcorrole ligands have been prepared and characterized by analytical, spectroscopical, electrochemical and structural means. All seven new complexes show the expected optical spectra of chromyl(V) corroles with the Soret band situated slightly above (meso-arylcorroles) or below ([Formula: see text]-alkylcorrole) 400 nm, and with an isotropic room temperature EPR signal for the [Formula: see text] ion Cr(V) at about [Formula: see text]. Cyclic voltammetry evidences two or three quasi-reversible one-electron redox steps, which are characterized as two ligand-centered processes and one metal-centered process based on spectroelectrochemical measurements and a Hammett analysis. Chemical reduction to a chromyl(IV) corrolate was successfully performed using NaHg and NEt3. Citric acid, however, produces a different reduction product, for which an isocorrole structure is proposed. Six chromyl(V) corroles could be analysed by seven single crystal diffraction analyses. The obtained molecular data prove the presence of remarkably similar CrN4O coordination units independent of the corrole substitution pattern, and of macrocyclic conformations which can be understood as comprised mainly of a doming mode, a more or less pronounced saddling mode, and one out of two different and dominating ruffling modes.

Covalently Linked Bis(Amido-Corroles): Inter- and Intramolecular Hydrogen-Bond-Driven Supramolecular Assembly

Four bis-corroles linked by diamide bridges were synthesized through peptide-type coupling of a trans-A₂ B-corrole acid with aliphatic and aromatic diamines. In the solid state, the hydrogen-bond pattern in these bis-corroles is strongly affected by the type of solvent used in the crystallization process. Although intramolecular hydrogen bonds play a decisive role, they are supported by intermolecular hydrogen bonds and weak N-H⋅⋅⋅π interactions between molecules of toluene and the corrole cores. In an analogy to mono(amido-corroles), both in crystalline state and in solutions, the aliphatic or aromatic bridge is located directly above the corrole ring. When either ethylenediamine or 2,3-diaminonaphthalene are used as linkers, incorporation of polar solvents into the crystalline lattice causes a roughly parallel orientation of the corrole rings. At the same time, both NHCO⋅⋅⋅NH corrole hydrogen bonds are intramolecular. In contrast, solvation in toluene causes a distortion with one of the hydrogen bonds being intermolecular. Interestingly, intramolecular hydrogen bonds are always formed between the -NHCO- functionality located further from the benzene ring present at the position 10-meso. In solution, the hydrogen-bonds pattern of the bis(amido-corroles) is strongly affected by the type of the solvent. Compared with toluene (strongly high-field shifted signals), DMSO and pyridine disrupt self-assembly, whereas hexafluoroisopropanol strengthens intramolecular hydrogen bonds.

Seven Clues to Ligand Noninnocence: The Metallocorrole Paradigm

Noninnocent ligands do not allow an unambiguous definition of the oxidation state of a coordinated atom. When coordinated, the ligands also cannot be adequately represented by a classic Lewis structure. A noninnocent system thus harbors oxidizing (holes) or reducing equivalents (electrons) that are delocalized over both the ligand and the coordinated atom. To a certain degree, that is true of all complexes, but the phenomenon is arguably most conspicuous in complexes involving ligands with extended π-systems. The electronic structures of such systems have often been mischaracterized, thereby muddying the chemical literature to the detriment of students and newcomers to the field. In recent years, we have investigated the electronic structures of several metallocorrole families, several of which have turned out to be noninnocent. Our goal here, however, is not to present a systematic account of the different classes of metallocorroles, but rather to focus on seven major tools (in a nod to A. G. Cairns-Smith's Seven Clues to the Origin of Life) that led us to recognize noninnocent behavior and subsequently to characterize the phenomenon in depth. (1) The optical probe: For a series of noninnocent meso-triarylcorrole derivatives with different para substituents X, the Soret maxima are typically exquisitely sensitive to the nature of X, red-shifting with increasing electron-donating character of the group. No such substituent sensitivity is observed for the Soret maxima of innocent triarylcorrole derivatives. (2) Quantum chemistry: Spin-unrestricted density functional theory calculations permit a simple and quick visualization of ligand noninnocence in terms of the spin density profile. Even for an S = 0 complex, the broken-symmetry method often affords a spin density profile that, its fictitious character notwithstanding, helps visualize the intramolecular spin couplings. (3) NMR and EPR spectroscopy: In principle, these two techniques afford experimental probes of the electronic spin density. (4) Structure/X-ray crystallography. Ligand noninnocence in metallocorroles is often reflected in small but distinct skeletal bond length alternations in and around the bipyrrole part of the macrocycle. In addition, for Cu and some Ag corroles, ligand noninnocence manifests itself via a strong saddling of the macrocycle. (5) Vibrational spectroscopy. Unsurprisingly, the aforementioned bond length alternations translate to structure-sensitive vibrational marker bands. (6) Electrochemistry. Noninnocent metallocorroles exhibit characteristically high reduction potentials, but caution should be exercised in turning the logic around. A high reduction potential does not necessarily signify a noninnocent metallocorrole; certain high-valent metal centers also undergo metal-centered reduction at quite high potentials. (7) X-ray absorption spectroscopy (XAS). By focusing on a given element, typically the central atom in a coordination complex, X-ray absorption near-edge spectroscopy (XANES) can provide uniquely detailed local information on oxidation and spin states, ligand field strength, and degree of centrosymmetry. For metallocorroles, some of the most clear-cut distinctions between innocent and noninnocent systems have come from the K-edge XANES of Mn and Fe corroles. For researchers faced with a new, potentially noninnocent system, the take-home message is to employ a good majority (i.e., at least four) of the above methods to arrive at a reliable conclusion vis-à-vis noninnocence.

X-ray Absorption Spectroscopy as a Probe of Ligand Noninnocence in Metallocorroles: The Case of Copper Corroles

The question of ligand noninnocence in Cu corroles has long been a topic of discussion. Presented herein is a Cu K-edge X-ray absorption spectroscopy (XAS) study, which provides a direct probe of the metal oxidation state, of three Cu corroles, Cu[TPC], Cu[Br8TPC], and Cu[(CF3)8TPC] (TPC = meso-triphenylcorrole), and the analogous Cu(II) porphyrins, Cu[TPP], Cu[Br8TPP], and Cu[(CF3)8TPP] (TPP = meso-tetraphenylporphyrin). The Cu K rising-edges of the Cu corroles were found to be about 0-1 eV upshifted relative to the analogous porphyrins, which is substantially lower than the 1-2 eV shifts typically exhibited by authentic Cu(II)/Cu(III) model complex pairs. In an unusual twist, the Cu K pre-edge regions of both the Cu corroles and the Cu porphyrins exhibit two peaks split by 0.8-1.3 eV. Based on time-dependent density functional theory calculations, the lower- and higher-energy peaks were assigned to a Cu 1s → 3d x2- y2 transition and a Cu 1s → corrole/porphyrin π* transition, respectively. From the Cu(II) porphyrins to the corresponding Cu corroles, the energy of the Cu 1s → 3d x2- y2 transition peak was found to upshift by 0.6-0.8 eV. This shift is approximately half that observed between Cu(II) to Cu(III) states for well-defined complexes. The Cu K-edge XAS spectra thus show that although the metal sites in the Cu corroles are more oxidized relative to those in their Cu(II) porphyrin analogues, they are not oxidized to the Cu(III) level, consistent with the notion of a noninnocent corrole. The relative importance of σ-donation versus corrole π-radical character is discussed.

Bis-copper(II) Complex of Triply-linked Corrole Dimer and Its Dication

Copper complexes of corroles have recently been a subject of keen interest due to their ligand non-innocent character and unique redox properties. Here we investigated bis-copper complex of a triply-linked corrole dimer that serves as a pair of divalent metal ligands but can be reduced to a pair of trivalent metal ligands. Reaction of triply-linked corrole dimer 2 with Cu(acac)₂ (acac=acetylacetonate) gave bis-copper(II) complex 2Cu as a highly planar molecule with a mean-plane deviation value of 0.020 Å, where the two copper ions were revealed to be divalent by ESR, SQUID, and XPS methods. Oxidation of 2Cu with two equivalents of AgBF₄ gave complex 3Cu, which was characterized as a bis-copper(II) complex of a dicationic triply-linked corrole dimer not as the corresponding bis-copper(III) complex. In accord with this assignment, the structural parameters around the copper ions were revealed to be quite similar for 2Cu and 3Cu. Importantly, the magnetic spin-spin interaction differs depending on the redox-state of the ligand, being weak ferromagnetic in 2Cu and antiferromagnetic in 3Cu.

Rapid one-pot synthesis of pyrrole-appended isocorroles

Free-base meso-triarylcorroles have been found to undergo oxidative coupling with an excess of pyrrole in dichloromethane in the presence of 2,3-dichloro-5,6-dicyano-1,4-benzoquinone (DDQ) affording 5/10-pyrrole-appended isocorroles in reasonable yields (35-60%) and in a matter of seconds. The free-base isocorrole ligands could all be complexed to copper with Cu(OAc)2·H2O in chloroform/methanol in 55-80% yields. Single-crystal X-ray structures of two of the new compounds (H2[5-pyr-TpOMePiC] and Cu[10-pyr-TpOMePiC]) revealed planar macrocycles with rms atomic displacements of only 0.02 and 0.06 Å relative to their respective best-fit C19N4 planes. Both free-base and Cu(ii)-complexed isocorroles exhibit richly featured UV-vis-NIR spectra with red/NIR absorption maxima at ∼650 nm and ∼725 nm for the free-bases and ∼800-850 nm for the copper complexes, suggesting potential applications in photodynamic therapy. Cyclic voltammetric analyses of five of the Cu complexes revealed fully reversible redox cycles with multiple oxidation and reduction features.

Local versus global aromaticity in azuliporphyrin and benziporphyrin derivatives

Carbaporphyrinoids afford fascinating examples of competition between local and global aromaticity in conjugated, polycyclic systems. Thus, whereas density functional theory calculations reveal only a modest effect of metal complexation on the current density profiles of true carbaporphyrins and azuliporphyrins, the impact is much greater for benziporphyrins, underscoring a strong competition between local and global aromaticity in the latter system. Furthermore, the calculations shed light on the remarkable efficacy of suitably placed electron-donating substituents on the benzene ring in boosting the global diatropic currents in a metallobenziporphyrin.

The interplay between structural perfectness and CO oxidation catalysis on aluminum, phosphorous and silicon complexes of corroles

Catalytic oxidation of carbon monoxide on perfect and defective structures of corrole complexes with aluminum, phosphorous and silicon have been investigated by performing density functional theory calculations.

Photophysical Properties of Nitrated and Halogenated Phosphorus Tritolylcorrole Complexes: Insights from Theory

The photophysical properties of a series of nitrated and halogenated phosphorus tritolylcorrole complexes were studied in dichloromethane solvent by using the density functional theory. Particular emphasis was given to the absorption spectra, the energy gap between the excited singlet and triplet states, and the magnitude of the spin-orbit couplings for a series of possible intersystem crossing channels between those excited states. The proposed study provides a better description of the photophysical properties of these systems while giving insights into their possible use as photosensitizers in photodynamic therapy.

Molecular structure of gold 2,3,7,8,12,13,17,18-octabromo-5,10,15-tris(4′-pentafluorosulfanylphenyl)corrole: Potential insights into the insolubility of gold octabromocorroles

X-ray structures of gold corroles, which are still rather uncommon, afford significant insights into intermolecular interactions involving Au(III), a subject that has been much less studied than aurophilic and metallophilic interactions involving Au(I). The X-ray structure of gold [Formula: see text]-octabromo-meso-tris(para-pentafluorosulfanylphenyl)corrole, reported herein, has revealed two Au···Br interactions (∼4.2 Å) per Au atom. We suggest that analogous but somewhat stronger Au···Br interactions are a key factor underlying the remarkable insolubility of gold octabromocorrole derivatives.

Synthesis and Molecular Structure of a Copper Octaiodocorrole

Although rather delicate on account of their propensity to undergo deiodination, β-octaiodoporphyrinoids are of considerable interest as potential precursors to novel β-octasubstituted macrocycles. Presented herein are early results of our efforts to synthesize β-octaiodocorrole derivatives. Oxidative condensation of 3,4-diiodopyrrole and aromatic aldehydes failed to yield free-base octaiodocorroles. Treatment of copper meso-tris(p-cyanophenyl)corrole with N-iodosuccinimide and trifluoroacetic acid over several hours, however, yielded the desired β-octaiodinated product in ∼22% yield. Single-crystal X-ray structure determination of the product revealed a strongly saddled corrole macrocycle with metrical parameters very close to those of analogous Cu octabromocorrole complexes. The compound was also found to exhibit an exceptionally red-shifted Soret maximum (464 nm in dichloromethane), underscoring the remarkable electronic effect of β-octaiodo substitution.

Porphyrinoids as a platform of stable radicals

The non-innocent ligand nature of porphyrins was observed for compound I in enzymatic cycles of cytochrome P450. Such porphyrin radicals were first regarded as reactive intermediates in catabolism, but recent studies have revealed that porphyrinoids, including porphyrins, ring-contracted porphyrins, and ring-expanded porphyrins, display excellent radical-stabilizing abilities to the extent that radicals can be handled like usual closed-shell organic molecules. This review surveys four types of stable porphyrinoid radical and covers their synthetic methods and properties such as excellent redox properties, NIR absorption, and magnetic properties. The radical-stabilizing abilities of porphyrinoids stem from their unique macrocyclic conjugated systems with high electronic and structural flexibilities.

Catalytic activity of corrole complexes with post-transition elements for the oxidation of carbon monoxide: a first-principles study

Our theoretical investigation shows that the aluminum and gallium complexes of corrole can be considered as potential high-performance catalysts for the oxidation of CO.